With `xdg-*` utilities CMAKE_INSTALL_PREFIX is incorrectly ignored.
Taken from [nvim-qt][1]. For some reason it only checks for !APPLE.
[1]: b26596d164/src/gui/CMakeLists.txt (L48-L55)
Problem: Cannot get the number of the current quickfix or location list.
Solution: Use the current list if "nr" in "what" is zero. (Yegappan
Lakshmanan) Remove debug command from test.
890680ca63
Several people have suggested that the "by Bram" byline is misleading,
it implies that Bram is actively involved with the project. Up to now we
left it as an homage.
Bram agreed that it is misleading, and suggested a mention somewhere
other than the intro.
The libvte test was too agressive, and is reduced to only triggering
when it is libvte 0.36 AND a gnome or xterm terminal type is used.
Contrastingly, tmux was not on the list at all and now is.
Update a flawed match pattern for the vimCommand syntax group. To see
the effect of this fix, open a vimscript buffer,
nvim -u NONE foo.vim
configure a couple highlight groups,
:hi! vimIsCommand ctermfg=Green
:hi! vimCommand ctermfg=Red
:syntax enable
and add the following lines to the buffer:
let foo=xFoo
let bar=zBar
You'll notice the "z" in zBar is Red, while xFoo and the rest of Bar are green. This will
be the case as long as the word following `=` starts with the letter "z". This has already
been fixed upstream by adding a "\>" word boundary to the match pattern:
https://github.com/vim/vim/issues/124e271909625 (diff-86da060e2153c8ce5dc317a7b4b5a29dR27)
This particular match pattern was also mentioned in issue #5491, but in reference to a bug
that was related to the generated part of syntax/vim.vim, whereas this bug lives in the
non-generated part of the file.
This allows users who have per-project Ruby versions (e.g. with `rvm`)
to pin to a particular gem installation.
For example: `let g:ruby_host_prog = 'rvm system do neovim-ruby-host'`
Sometimes the `gem list` command used for finding the latest version of
the `neovim` gem prints an error, which can throw off the `split()` call
due to extra parenthesis. This locks down the split pattern to make
conflicts less likely.
This is a new convention pioneered by tmux. It does not do much for
nvim; since nvim always looks to see whether it should be making up
"setrgbf" and "setrgbb" capabilities. But it is a way for terminfo to
force this, irrespective of the hardwired list in the code, for more
terminal types. On the gripping hand, updating terminfo descriptions to
actually have "setrgbf" and "setrgbb" capabilities so that nvim never
has to try to invent them in the first place, is as good if not better
an approach for overriding what is baked into the code.
The example used &term which is no longer meaningful.
Fortunately, we can change this into a useful example using $TERM that also
shows how to address a common need with termguicolors at the same time.
The details are in the on-line help under :help true-color .
The brief precis is that nvim is (I hope.) converging with tmux and libvte.
It is taking the same approach with setrgbf and setrgbb terminfo capabilities
that it does with the Ss and Se terminfo capabilities.
The details are in the on-line help under :help cursor-shape .
The brief precis is that nvim is following the lead of tmux, and going
beyond what tmux does to make cursor shape changes work on a broad range of
terminals. This includes on tmux itself, which is no longer bypassed.
This documents 256-colour and true colour handling, cursor shapes,
and scrolling regions.
Almost all of these headings are taken from the Vim doco, so that
the :help commands that people learn are a transferable skill.
Reverts commit 337b6179dfCloses#6716 at the expense of not being able to use a
multi-key 'pastetoggle' manually.
Multi-key 'pastetoggle' can still be used when inserting the entire
option into the typebuffer at once (though the use here is
questionable).
Also remove those tests to do with waiting for the completion of
'pastetoggle' and mention in the documentation that 'pastetoggle'
doesn't wait for timeout.
Showing the 'number' column in terminal buffers is a bit silly because
of 'scrollback'. But it's mostly harmless and technically works as
expected.
The least surprising thing is to leave the user's settings alone. Since
there are tradeoffs in both cases, we choose inertia.
We still disable 'relativenumber' in *terminal-mode* (as opposed to
normal-mode) because it is totally broken: the Nvim cursor (not terminal
cursor) is always on the last line.
Fix the following issues according to rubocop:
runtime/autoload/provider/script_host.rb:2:11: C: Prefer single-quoted strings when you don't need string interpolation or special symbols.
require "neovim/ruby_provider"
^^^^^^^^^^^^^^^^^^^^^^
runtime/autoload/provider/script_host.rb:5:5: C: Prefer single-quoted strings when you don't need string interpolation or special symbols.
"Your neovim RubyGem is missing or out of date. " +
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
runtime/autoload/provider/script_host.rb:5:55: C: Use \ instead of + or << to concatenate those strings.
"Your neovim RubyGem is missing or out of date. " +
runtime/autoload/provider/script_host.rb:6:5: C: Prefer single-quoted strings when you don't need string interpolation or special symbols.
"Install the latest version using `gem install neovim`."
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This commit assumes Ruby 2.0.0+.
Problem: Adding pattern to ":oldfiles" is not a generic solution.
Solution: Add the ":filter /pat/ cmd" command modifier. Only works for some
commands right now.
7b668e83d0
Problem: The netrw plugin does not work.
Solution: Make it accept version 8.0.
9e1e7afc1f
vim-patch:b56e7ff0dbbf
Update translations for intro page.
b56e7ff0db
Asynchronous API functions are served immediately, which means pending
input could change the state of Nvim shortly after an async API function
result is returned.
nvim_get_mode() is different:
- If RPCs are known to be blocked, it responds immediately (without
flushing the input/event queue)
- else it is handled just-in-time before waiting for input, after
pending input was processed. This makes the result more reliable
(but not perfect).
Internally this is handled as a special case, but _semantically_ nothing
has changed: API users never know when input flushes, so this internal
special-case doesn't violate that. As far as API users are concerned,
nvim_get_mode() is just another asynchronous API function.
In all cases nvim_get_mode() never blocks for more than the time it
takes to flush the input/event queue (~µs).
Note: This doesn't address #6166; nvim_get_mode() will provoke #6166 if
e.g. `d` is operator-pending.
Closes#6159
ex_loadview() was changed in 9b1c939370 to check the file open result.
If user doesn't care about failure to open, using :silent! instead of
:silent is a reasonable, conventional approach.
Closes#3196
Calling cmd.exe in Windows follows a very different pattern from Vim.
The primary difference is that Vim does a nested call to cmd.exe, e.g.
the following call in Vim
system('echo a 2>&1')
spawns the following processes
"C:\Program Files (x86)\Vim\vim80\vimrun" -s C:\Windows\system32\cmd.exe /c (echo a 2^>^&1
^>C:\Users\dummy\AppData\Local\Temp\VIoC169.tmp 2^>^&1)
C:\Windows\system32\cmd.exe /c C:\Windows\system32\cmd.exe /c (echo a 2^>^&1
^>C:\Users\dummy\AppData\Local\Temp\VIo3C6C.tmp 2^>^&1)
C:\Windows\system32\cmd.exe /c (echo a 2>&1
>C:\Users\dummy\AppData\Local\Temp\VIo3C6C.tmp 2>&1)
The escaping with ^ is needed because cmd.exe calls itself and needs to
preserve the special metacharacters for the last call. However in nvim
no nested call is made, system('') spawns a single cmd.exe process.
Setting shellxescape to "" disables escaping with ^.
The previous default for shellxquote=( wrapped any command in
parenthesis, in Vim this is more meaningful due to the use of tempfiles
to store the output and redirection (also see &shellquote). There is
a slight benefit in having the default be empty because some expressions
that run in console will not run within parens e.g. due to unbalanced
double quotes
system('echo "a b')
Disable CommandLineToArgvW-standard quoting for cmd.exe.
libuv assumes spawned processes follow the convention expected by
CommandLineToArgvW(). But cmd.exe is non-conformant, so for cmd.exe:
- With system([]), the caller has full control (and responsibility) to
quote arguments correctly.
- With system(''), shell* options are used.
libuv quoting is disabled if argv[0] is:
- cmd.exe
- cmd
- $COMSPEC resolving to a path with filename cmd.exe
Closes#6329
References #6387
> The option 'maxmem' ('mm') is used to set the maximum memory used for one
> buffer (in kilobytes). 'maxmemtot' is used to set the maximum memory used for
> all buffers (in kilobytes). The defaults depend on the system used. These
> are not hard limits, but tell Vim when to move text into a swap file. If you
> don't like Vim to swap to a file, set 'maxmem' and 'maxmemtot' to a very large
> value. The swap file will then only be used for recovery. If you don't want
> a swap file at all, set 'updatecount' to 0, or use the "-n" argument when
> starting Vim.
On today's systems these values are huge (4GB in my machine with 8GB of RAM
since it's set as half the available memory by default) so the limits are
never reached in practice, but Vim wastes a lot of time checking if the limit
was reached.
If the limit is reached Vim starts saving pieces of the swap file that were in
memory to the disk. Said in a different way: Vim implements its own memory
swapping mechanism. This is unnecessary and inefficient since the operating
system already virtualized the memory and will swap to the disk if programs
start using too much memory.
This change does...
1. Reduce the number of config options and need for documentation.
2. Make the code more efficient as we don't have to keep track of memory usage
nor check if the memory limits were reached to start swapping to disk every
time we need memory for buffers.
3. Simplify the code. Once `memfile.c` is simple enough it could be replaced by
actual operating system memory mapping (`mmap`, `MemoryViewOfFile`...).
This change does not prevent Vim to recover changes from swap files since the
swapping code is never triggered with the huge limits set by default.
Adds os_strerror() result to a number of places. Also since I could not track
where err\* variables are NULL and where they are not, using macros to make sure
that all three variables are set at once.
Removes #ifdef UNIX around the use of os_fsync, makes it use os_close in place
of close in some places.
For now only supports valid hex colors (does not check for the validity
the hex color) when termguicolors is set, otherwise it won't attempt to
change the cursor color.
Make the 'scrollback' option work like most other buffer-local options:
- `:set scrollback=x` sets the global and local value
- `:setglobal scrollback=x` sets only the global default
- new terminal buffers inherit the global
Normal buffers are still always -1, and :setlocal there is an error.
Closes#6337
The comment is incorrect, s:error does need to be called. I thought the
call was unnecessary because it didn't show any message for me but I had
shortmess+=F which was hiding the message.
Problem: It is not possible to use plugins in an "after" directory to tune
the behavior of a package.
Solution: First load plugins from non-after directories, then packages and
finally plugins in after directories.
Reset 'loadplugins' before executing --cmd arguments.
66459b7c98
vim-patch:7.4.2172
vim-patch:7.4.2169
vim-patch:7.4.2177
vim-patch:7.4.2178
vim-patch:7.4.2184
vim-patch:8.0.0050
vim-patch:8.0.0105
vim-patch:8.0.0400
vim-patch:8.0.0405
Closes#6034
Problem: There is no easy way to stop all timers. There is no way to
temporary pause a timer.
Solution: Add timer_stopall() and timer_pause().
b73598e2f0
Problem: 'formatprg' is a global option but the value may depend on the
type of buffer. (Sung Pae)
Solution: Make 'formatprg' global-local. (closesvim/vim#1380)
9be7c04e6c
- Vim "unix default" of 'noshowcmd' is serving few users. And it's
inconsistent.
- 'ruler' and 'belloff=all' improve the out-of-the-box experience.
- Continue to use 'noshowcmd' and 'noruler' by default in the functional
tests to keep them fast.
TODO: Add a "disable slow stuff" command or mapping to address the
use-case of a very slow terminal connection.
Dispense with the FuncUndefined/CmdUndefined quasi-optimization.
If there are no rplugins, plugin/rplugin.vim takes less than 1ms.
Closes#5821Closes#6250
Helped-by: Qiming zhao <chemzqm@gmail.com>
Do this on all systems, so that portable builds work everywhere. This
allows us to ship archives with this folder structure:
bin/nvim
share/nvim/runtime
then ./bin/nvim works without the user needing to explicitly set VIMRUNTIME.
It's important that users have a single, easy-to-remember place for
reading about the API. So this commit changes gen_api_vimdoc.py so that
the generated section is appended to api.txt instead of creating
a separate document.
Also remove the section numbering and ToC: it's a maintenance cost, and
it will be unnecessary when #5169 is integrated.
Let the terminal dictate the normal-mode cursor position. This will be
disorienting sometimes, but it is closer to what users expect vs always
going to the last line.
Problem: Man test fails when run with the GUI.
Solution: Adjust for different behavior of GUI. Add assert_inrange().
61c04493b0
Only changes related to assert_inrange() were included, since we have a
distinct man plugin.
Problem: Values for true and false can be confusing.
Solution: Update the documentation. Add a test. Make v:true evaluate to
TRUE for a non-zero-arg.
e381d3d5e0
Problem: Cannot get all information about a quickfix list.
Solution: Add an optional argument to get/set loc/qf list(). (Yegappan
Lakshmanan)
d823fa910c
Problem: There is no equivalent of 'smartcase' for a tag search.
Solution: Add value "followscs" and "smart" to 'tagcase'. (Christian
Brabandt, closesvim/vim#712) Turn tagcase test into new style.
66e29d7112
The "technically correct" interpretation is to execute the first line
that is seen (and this is what happens on middle-click paste in Vim).
^M is only intended to "defuse" the newline, so the user can review it.
The parent commit changed the behavior to insert <Space> between lines,
but that's a higher-risk change: it is arguably possible that some user
*wants* the literal ^M chars when e.g. assigning to a register:
:let @a='<C-R>b'
To avoid that risk, keep the old behavior and only omit the last ^M.
This makes `yy:<C-R>0` nicer at no cost.
^M isn't any more "correct" than space: the "technically correct"
interpretation is to execute the first line that is seen (and this is
what happens on middle-click paste in Vim). ^M is only intended to
defuse the newline, so that the user can review the command. We can do
that with a space instead, and then the command can be executed without
having to fix it up first.
Problem: Using function() with a name will find another function when it is
redefined.
Solution: Add funcref(). Refer to lambda using a partial. Fix several
reference counting issues.
437bafe4c8
Problem: User defined functions can't be a closure.
Solution: Add the "closure" argument. Allow using :unlet on a bound
variable. (Yasuhiro Matsumoto, Ken Takata)
10ce39a0d5
Problem: Using submatch() in a lambda passed to substitute() is verbose.
Solution: Use a static list and pass it as an optional argument to the
function. Fix memory leak.
df48fb456f
Problem: filter() and map() either require a string or defining a function.
Solution: Support lambda, a short way to define a function that evaluates an
expression. (Yasuhiro Matsumoto, Ken Takata)
069c1e7fa9
Problem: Cannot detect a crash in tests when caused by garbagecollect().
Solution: Add garbagecollect_for_testing(). Do not free a job if is still
useful.
ebf7dfa6f1
The exists('g:loaded_foo') convention is rather common, and may be
relied upon in some cases. It's also very unlikely that a user or plugin
has any reason to set g:loaded_foo to zero, so the principle of least
surprise can be brushed aside here.
https://github.com/neovim/neovim/issues/6107#issuecomment-279532143
This allows executables to be found by :!, system(), and executable() if
they live next to ("sibling" to) nvim.exe. This is what gvim on Windows
does, and also matches the behavior of Win32 SearchPath().
c4a249a736/src/os_win32.c (L354-L370)
Closes#3689
cmake: Add `desktop-install` and `icon-install` targets. `runtime`
target will trigger them.
Specification:
https://specifications.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html#recognized-keys
Icons are stored system-wide in /usr/share/applications or user wide at
/usr/share/icons/hicolor/scalable/apps and can be overriden in ~/.local/share/icons
nvim.desktop file can be installed system wide or in
~/.local/share/applications/
To test without an installer:
$ xdg-desktop-menu install --novendor runtime/nvim.desktop
$ xdg-icon-resource install --novendor --mode user --size 64 contrib/nvim-icon.png
Once it is installed, you can test with gtk-launch if installed or
dmenu/rofi (drun mode)
This default causes too much confusion for terminal users. Until
a better approach is implemented, revert to the traditional default.
Better solution would be:
- Implement a right-click menu for TUI
- Set 'mouse=a' *only* if clipboard is working.
Closes#5938
Since `curl -s` is used, the actual error (e.g. "curl: (6) Could not
resolve host: pypi.python.org") gets not reported anyway, and s:download
returns an error message with `s:shell_error` already.
This changes `s:download` to also include `a:url` in the error message
now.
It removes
> ERROR: Command error (7) curl -sL https://pypi.python.org/pypi/neovim/json:
And changes
> ERROR: HTTP request failed: error: curl error with https://pypi.python.org/pypi/neovim/json: 6
This helps to identify where the `neovim` module is coming from, e.g.
- INFO: python3-neovim version: 0.1.10 (outdated; from ~/Vcs/neovim-python-client/neovim)
- WARNING: Latest python3-neovim is NOT installed: 0.1.12
- s:version_info: return errors from the `import`
- skip report_ok for latest version, in case the current version was
not found. status contains the error that has been reported in that
case already.
* health: Handle backslash path separators.
* health: brevity, consistency
* health: Do not set bufhidden=wipe.
In the context of CheckHealth, bufhidden=wipe loses data for no reason.
I gone through every single line, renamed the variables to be more consistent
and reordered many lines. Information is now printed as soon as it's available
and errors lead to early returns.
I altered the suggestions for each condition to be more precise and checked that
they fail properly.
This also prevents invalid arguments getting passed to s:version_cmp().
