before the behaviour of 'mouse' was inconsistent in external UI,
as some remapping logic would check has_mouse() and others don't
(no difference in TUI or vim classic). With this change, the behaviour
is consistently up to the UI decide (see ui.txt edit)
Behaviour of tui.c is unaffected by this change.
Problem: Cannot navigate to errors before/after the cursor.
Solution: Add the :cbefore and :cafter commands. (Yegappan Lakshmanan,
closesvim/vim#4340)
cf6a55c4b0
Problem: No error for quickfix commands with negative range.
Solution: Add ADDR_UNSIGNED and use it for quickfix commands. Make
assert_fails() show the command if the error doesn't match.
25190db225
N/A patches for version.c:
vim-patch:8.2.0113: "make cmdidxs" fails
Problem: "make cmdidxs" fails.
Solution: Allow address for ":cquit". Add --not-a-term to avoid a delay.
9b24dfcb9f
Problem: Cannot see the selection type in :reg output. (Ayberk Aydın)
Solution: Add c/l/b. (Christian Brabandt, closesvim/vim#5110, closesvim/vim#4546)
3691f1ee72
Patch v8.1.0999 is not ported so ":registers" does not omit register 1.
"set foldcolumn=auto" is documented but not supported.
Support it by making it behave as "auto:1", similar to "signcolumn".
Close https://github.com/neovim/neovim/pull/13561
Opt in to this secret world using
set wildchar=0
" already the default, but remove if non-zero existing config:
set wildcharm=0
now you can map 'wildmode' just like any mode:
cnoremap <tab> <c-z>
function! Spacey()
return getcmdline()[-1:] == "/" ? "\<bs>" : ""
endfunc
cnoremap <expr> / wildmenumode() ? Spacey()."/<c-z>" : "/"
Possibly asked questions:
What about backwards compatibility?
====
Just do nothing and your existing 'wildchar' and 'wildcharm' will keep working.
Doesn't `<c-z>` mean suspend?
====
Not in cmdline mode. If it would then the recommended wildcharm would not
have been `<c-z>` to start with.
My config relies on `:<c-z>` being a synonym to `:<nop>`!
====
just no.
* First implementation of workspace folders
* Add completion for current directory
* Add tracking of workspace folders
* Add workspace folder listing
* Add checks on adding/removing workspaces
* Add appropriate initialization options
* Add documentation
* Make workspaceFolders available wherever client is
Problem: Cannot get window type for autocmd and preview window.
Solution: Add types to win_gettype(). (Yegappan Lakshmanan, closesvim/vim#6277)
0fe937fd86
Cherry-pick test_preview.vim,test_window_cmd.vim changes
from patch v8.2.0522.
Problem: MS-Windows: shell commands fail if &shell contains a space.
Solution: Use quotes instead of escaping. (closesvim/vim#4920)
2efc44b3f0
Always double-quote &shell if it contains a space.
Neovim does not support escaping space with backslash, unlike Vim.
N/A patches for version.c:
vim-patch:8.0.1455: if $SHELL contains a space then 'shell' is incorrect
Problem: If $SHELL contains a space then the default value of 'shell' is
incorrect. (Matthew Horan)
Solution: Escape spaces in $SHELL. (Christian Brabandt, closesvim/vim#459)
4bfa8af141
vim-patch:8.2.1194: test failure because shell prompt differs
Problem: Test failure because shell prompt differs.
Solution: Set the shell prompt.
a4dc6f92bb
Implement the LanguageTree structure to enable language injection.
This is done be removing the old Parser metatable and replacing by the
new structure, with the same API (almost).
Some noticeable differences :
- `parser:parse()` now returns a table of trees
- There is no incremental parsing for child (injected) languages
Co-authored-by: Thomas Vigouroux <tomvig38@gmail.com>
* lsp: Remove duplicate `diagnostics` fallback in diagnostic.display
* lsp: Expose all diagnostics
Before the changes in #12655 it was possible to retrieve all diagnostics
via `vim.lsp.util.diagnostics_by_buf`.
This adds a `diagnostic.get_all()` to enable users to retrieve all
diagnostics.
Use cases for that could include loading all diagnostics into the
quickfix list, or to build an enhanced goto_next that can move across
buffers.
Breaking Changes:
- Deprecated all `vim.lsp.util.{*diagnostics*}()` functions.
- Instead, all functions must be found in vim.lsp.diagnostic
- For now, they issue a warning ONCE per neovim session. In a
"little while" we will remove them completely.
- `vim.lsp.callbacks` has moved to `vim.lsp.handlers`.
- For a "little while" we will just redirect `vim.lsp.callbacks` to
`vim.lsp.handlers`. However, we will remove this at some point, so
it is recommended that you change all of your references to
`callbacks` into `handlers`.
- This also means that for functions like |vim.lsp.start_client()|
and similar, keyword style arguments have moved from "callbacks"
to "handlers". Once again, these are currently being forward, but
will cease to be forwarded in a "little while".
- Changed the highlight groups for LspDiagnostic highlight as they were
inconsistently named.
- For more information, see |lsp-highlight-diagnostics|
- Changed the sign group names as well, to be consistent with
|lsp-highlight-diagnostics|
General Enhancements:
- Rewrote much of the getting started help document for lsp. It also
provides a much nicer configuration strategy, so as to not recommend
globally overwriting builtin neovim mappings.
LSP Enhancements:
- Introduced the concept of |lsp-handlers| which will allow much better
customization for users without having to copy & paste entire files /
functions / etc.
Diagnostic Enhancements:
- "goto next diagnostic" |vim.lsp.diagnostic.goto_next()|
- "goto prev diagnostic" |vim.lsp.diagnostic.goto_prev()|
- For each of the gotos, auto open diagnostics is available as a
configuration option
- Configurable diagnostic handling:
- See |vim.lsp.diagnostic.on_publish_diagnostics()|
- Delay display until after insert mode
- Configure signs
- Configure virtual text
- Configure underline
- Set the location list with the buffers diagnostics.
- See |vim.lsp.diagnostic.set_loclist()|
- Better performance for getting counts and line diagnostics
- They are now cached on save, to enhance lookups.
- Particularly useful for checking in statusline, etc.
- Actual testing :)
- See ./test/functional/plugin/lsp/diagnostic_spec.lua
- Added `guisp` for underline highlighting
NOTE: "a little while" means enough time to feel like most plugins and
plugin authors have had a chance to refactor their code to use the
updated calls. Then we will remove them completely. There is no need to
keep them, because we don't have any released version of neovim that
exposes these APIs. I'm trying to be nice to people following HEAD :)
Co-authored: [Twitch Chat 2020](https://twitch.tv/teej_dv)
:cquit can use count to set the exit code
patch 8.2.0095: cannot specify exit code for :cquit
:tchdir tab-local current-directory
patch 8.1.1218: cannot set a directory for a tab page
Autocmd Events:
- DirChanged
patch 8.0.1459: cannot handle change of directory
- TextYankPost
patch 8.0.1394: cannot intercept a yank command
tabpagenr() "#" argument
g<Tab> goes to the last-accessed tabpage.
patch 8.2.1401: cannot jump to the last used tabpage
hl-QuickFixLine
patch 8.0.0641: cannot set a separate highlighting for the quickfix line
v:event
patch 8.0.1394: cannot intercept a yank command
K in help documents can be used like CTRL-].
Updated as part of a runtime update.
4c05fa08c9
- Describe query components (capture, match, pattern). Not
well-described in tree-sitter documentation.
- Describe Query() object. Not actually described anywhere in
documenation.
Problem: Pragmas are indented all the way to the left.
Solution: Add an option to indent progmas like normal code. (Max Rumpf,
closesvim/vim#5468)
d881b516da
N/A patches for version.c:
vim-patch:8.1.2030: tests fail when build with normal features and terminal
Problem: Tests fail when build with normal features and terminal.
(Dominique Pelle)
Solution: Disable tests that won't work. (closesvim/vim#4932)
997d42427e
vim-patch:8.1.2063: some tests fail when +balloon_eval_term is missing
Problem: Some tests fail when +balloon_eval_term is missing but
_balloon_eval is present. (Dominique Pelle)
Solution: Check the right feature in the test. (closesvim/vim#4962)
1e82a784ac
vim-patch:8.2.1938: wiping out a terminal buffer makes some tests fail
Problem: Wiping out a terminal buffer makes some tests fail.
Solution: Do not wipe out the terminal buffer unless wanted.
a46765a797
Problem: Number of status line items is limited to 80.
Solution: Dynamically allocate the arrays. (Rom Grk, closesvim/vim#7181)
8133cc6bf4
The members of stl_item_T have not been prefixed with stl_ contrary to
the vim patch because the amount of stl_ prefixes on single lines of
code in that region was hurtful to readability.
Language servers can already send log messages to the client while the
server is still being initialized.
This currently leads to "client has shut down" messages which are
confusing to the user as the server is properly starting.
To fix this this changes the `get_client_by_id` method to also return a
client if it is still initializing.
Problem: Can't do something just before leaving Insert mode.
Solution: Add the InsertLeavePre autocommand event. (closesvim/vim#7177)
b53e13a91a
N/A patches for version.c:
vim-patch:8.1.1877: graduated features scattered
Problem: Graduated features scattered.
Solution: Put graduated and obsolete features together.
ffc0716af8
vim-patch:8.2.1875: warning when building GTK gui
Problem: Warning when building GTK gui.
Solution: Add missing function parameter.
3da855c8e2
vim-patch:8.2.1877: test for function list fails
Problem: Test for function list fails.
Solution: Move "obsolete" comments one line up.
b8f519e538
vim-patch:8.2.1878: GTK: error for redefining function
Problem: GTK: error for redefining function. (Tony Mechelynck)
Solution: Remove "gtk_" prefix from local functions and prepend "gui_" to
global functions.
8a99e66b4f
vim-patch:8.2.1881: cannot build with GTK3
Problem: Cannot build with GTK3.
Solution: Adjust form functions.
692d1a51e7
vim-patch:8.2.1883: compiler warnings when using Python
Problem: Compiler warnings when using Python.
Solution: Adjust PyCFunction to also have the second argument. Use "int"
return type for some functions. Insert "(void *)" to get rid of
the remaining warnings.
4ce5fe4c87
Problem: trim() always trims both ends.
Solution: Add an argument to only trim the beginning or end. (Yegappan
Lakshmanan, closesvim/vim#6126)
2245ae18e3
Problem: Not enough testing for the Ruby interface.
Solution: Add more tests. (Dominique Pelle, closesvim/vim#3252)
edd6aacb01
Modified some tests to make them pass for Neovim.
Some tests will always fail because +ruby is externalized in Neovim.
Skip failing ruby tests for now.
Problem: Quickfix buffer shows up in list, can't get buffer number.
Solution: Make the quickfix buffer unlisted when the quickfix window is
closed. get the quickfix buffer number with getqflist().
(Yegappan Lakshmanan, closesvim/vim#4113)
647e24ba3d
Problem: Cannot easily change the current quickfx list index.
Solution: Add the "idx" argument to setqflist(). (Yegappan Lakshmanan,
closesvim/vim#3701)
5b69c22fd2
Problem: Dictionary with string keys is longer than needed.
Solution: Use *{key: val} for literaly keys.
d5abb4c877
Vim's popup,textprop features are N/A.
Neovim has not polyfilled their APIs.
Skip docs and tests for these features.
In #8226 <A-x> and <M-x> were changed to behave like <Esc>x in insert
mode when no mapping exists. This commit backs out that change and
replaces it with a more general one that makes unmapped ALT and META
keypresses as <Esc>+char in all modes. This fixes an unnecessary and
confusing inconsistency between modes.
Problem: 'verbose' value 16 causes duplicate output.
Solution: Combine levels 15 and 16 into one message. (Christian Brabandt,
closesvim/vim#6153)
823654bc06
Problem: Spell checking doesn't work for CamelCased words.
Solution: Add the "camel" value in the new option 'spelloptions'.
(closesvim/vim#1235)
362b44bd4a
- TUI: Fix a case where the cursor was not displayed after hiding the
cursor and then setting it to be displayed again.
- Change to reset everything before setting guicursor.
fixes#12800close#12811
Steps to reproduce:
nvim -u NORC
:set termguicolors
:hi nCursor guifg=red guibg=red
:hi iCursor guifg=green guibg=green
:hi cCursor guifg=blue guibg=blue
:set guicursor=n:block-nCursor,i:hor25-iCursor,c:ver25-cCursor
:set guicursor-=c:ver25-cCursor
Actual behaviour: Cursor is a blue vertical.
Expected behaviour: Cursor should be the default color block.
* docs: Add hint for :help vim.lsp.buf for new users
* fix: Use help linker for vim.lsp.buf
* docs: Extend full api list language. Move gd to bottom. Add note about limited support
* support for :perl, :perlfile, :perldo and perleval()
* document that the perl provider doesn't currently work on Windows
* document that the perl legacy interface is now also supported
* added perleval() documentation
* import legacy perl interface tests
* only perl 5.22+ is supported
* healtcheck: use g:perl_host_prog if its set instead
using just 'perl' isn't correct as it may not be the version requested.
ditto for 'cpanm', rather go through 'App::cpanminus' to find the latest
perl version
- remove redundant autocmd list
This "grouped" list is useless, it only gets in the way when searching
for event names.
- intro.txt: cleanup
- starting.txt: update, revisit
- doc: `:help bisect`
- mbyte.txt: update aliases 1656367b90. closes#11960
- options: remove 'guifontset'. Why:
- It is complicated and is used by almost no one.
- It is unlikely to be implemented by Nvim GUIs (complicated to parse,
specific to Xorg...).
Since 1c3ca4f18f, 2c1d12d0be, #7836, the "unix" and "slash" behavior
of 'sessionoptions'/'viewoptions' is always enabled, and the flags are
just ignored. There is no reason for that behavior to be configurable.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Not so easy to interrupt a script programatically.
Solution: Add the interrupt() function. (Yasuhiro Matsumoto, closesvim/vim#2834)
67a2deb9cb
Problem: Cannot redefine user command without ! in same script
Solution: Allow redefining user command without ! in same script, like with
functions.
55d4691308
Problem: Sign column takes up space. (Adam Stankiewicz)
Solution: Optionally put signs in the number column. (Yegappan Lakshmanan,
closesvim/vim#4555, closesvim/vim#4515)
394c5d8870
* LSP: Add support for call hierarchies
* LSP: Add support for call hierarchies
* LSP: Add support for call hierarchies
* LSP: Jump to call location
Jump to the call site instead of jumping to the definition of the
caller/callee.
* LSP: add tests for the call hierarchy callbacks
* Fix linting error
Co-authored-by: Cédric Barreteau <>
Problem: When evaluating 'statusline' the current window is unknown.
(Daniel Hahler)
Solution: Set "g:actual_curwin" for %{} items. Set "g:statusline_winid"
when evaluationg %!. (closesvim/vim#4406, closesvim/vim#3299)
1c6fd1e100
* Fix some small doc issues
* doc: fixup
* doc: fixup
* Fix lint and rebase
* Remove bad advice
* Ugh, stupid mpack files...
* Don't let people include these for now until they specifically want to
* Prevent duplicate tag
Problem: Syntax foldlevel is taken from the start of the line.
Solution: Add ":syn foldlevel" to be able to use the minimal foldlevel in the line.
e35a52aee7
With `foldmethod=syntax` the foldlevel of a line is computed based
on syntax items on the line. Previously we always used the level
of the syntax item containing the start of the line. This works
well in cases such as:
if (...) {
...
}
else if (...) {
...
}
else {
...
}
which folds like this:
+--- 3 lines: if (...) {---------------------------
+--- 3 lines: else if (...) {----------------------
+--- 3 lines: else {-------------------------------
However, the code:
if (...) {
...
} else if (...) {
...
} else {
...
}
folds like this:
+--- 7 lines: if (...) {---------------------------
We can make the latter case fold like this:
+--- 2 lines: if (...) {---------------------------
+--- 2 lines: } else if (...) {--------------------
+--- 3 lines: } else {-----------------------------
by choosing on each line the lowest fold level that is followed
by a higher fold level.
Add a syntax command
:syntax foldlevel [start | minimum]
to choose between these two methods of computing the foldlevel of
a line.
* lsp: support custom hl groups in show_line_diagnostics
Closes#12472.
* runtime: add docs for the new lsp highlight groups
Co-authored-by: francisco souza <fsouza@users.noreply.github.com>
When UV_OVERLAPPED_PIPE was used for the pipe passed to the child process, a
problem occurred with the standard input of the .Net Framework application
(#11809). Therefore, add the overlapped option to jobstart() and change it so
that it is set only when necessary
The `:lcd -` command, and `:tcd -` which returns to a previous directory, can be done with `:lc -` and `:tc -` respectively.
Basically, the d is optional, so I updated the documentation to indicate this in the traditional format.
* add lua function to highlight yanked region
* extract namespace, better naming, default values
* add default for event argument
* free timer
* factor out mark to position calculation
* d'oh
* make sure timer stops before callback (cf. luv example)
* factor out timer, more documentation
* fixup
* validate function argument for schedule
* fix block selection past eol
* correct handling of multibyte characters
* move arguments around, some cleanup
* move utility functions to vim.lua
* use anonymous namespaces, avoid local api
* rename function
* add test for schedule_fn
* fix indent
* turn hl-yank into proper (hightlight) module
* factor out position-to-region function
mark extraction now part of highlight.on_yank
* rename schedule_fn to defer_fn
* add test for vim.region
* todo: handle double-width characters
* remove debug printout
* do not shadow arguments
* defer also callable table
* whitespace change
* move highlight to vim/highlight.lua
* add documentation
* add @return documentation
* test: add check before vim.defer fires
* doc: fixup
Problem: Cannot delete a match from another window. (Paul Jolly)
Solution: Add window ID argument to matchdelete(), clearmatches(),
getmatches() and setmatches(). (Andy Massimino, closesvim/vim#4178)
aff749145e
* Add textDocument/codeAction
* Add callback for workspace/executeCommand
* Escape newlines in codeAction titles
* Return empty list in get_line_diagnostics if no buffer diagnostics
* Add stub documentation
* Validate context parameter in code_action
* Add support for edit in CodeAction responses
* Group diagnostics by line in vim.lsp.util.get_line_diagnostics()
* Advertise code action literal support
Besides the special-case in get_scrolloff_value(), it makes sense for
'scrolloff' and 'sidescrolloff' to reflect the correct values (for
plugins, scripts, …).
ref 53d607af9c53accfd634435908fb79061f1212b9
ref #11915
ref #12230
* lsp: add workspace/symbol
* refactor symbol callback
* set hierarchical symbol support to true
* add documentation and default mapping
Co-authored-by: Hirokazu Hata <h.hata.ai.t@gmail.com>
This commit creates 4 new highlight groups:
- LspDiagnosticsErrorSign
- LspDiagnosticsWarningSign
- LspDiagnosticsInformationSign
- LspDiagnosticsHintSign
These highlight groups are linked to their corresponding LspDiagnostics
highlight groups by default.
This lets users choose a different color for their sign columns and
virtualtext diagnostics.
The method with the name 'textDocument/peekDefinition' is not part of
the official language server protocol specification. Therefore no
language server can/will support this. Thereby all related code and
documentation as been removed.
Expose `vim.lsp.buf.diagnostics_by_buf`
This makes it easier to customize the diagnostics behavior. For example
to defer the update they can override the
`textDocument/publishDiagnostics` callback to only call
`buf_diagnostics_save_positions` and then defer the other actions to a
autocmd event.
Problem: The "last used" info of a buffer is under used.
Solution: Add "lastused" to getbufinfo(). List buffers sorted by last-used
field. (Andi Massimino, closesvim/vim#4722)
52410575be
Problem: Can execute shell commands in rvim through interfaces.
Solution: Disable using interfaces in restricted mode. Allow for writing
file with writefile(), histadd() and a few others.
8c62a08faf
Problem: A plugin cannot easily expand a command like done internally.
Solution: Add the expandcmd() function. (Yegappan Lakshmanan, closesvim/vim#4514)
80dad48c50
