Problem: cannot highlight completed text
Solution: (optionally) highlight auto-completed text using the
ComplMatchIns highlight group (glepnir)
closes: vim/vim#161736a38aff218
Co-authored-by: glepnir <glephunter@gmail.com>
When a terminal application running inside the terminal emulator sets
the cursor shape or blink status of the cursor, update the cursor in the
parent terminal to match.
This removes the "virtual cursor" that has been in use by the terminal
emulator since the beginning. The original rationale for using the
virtual cursor was to avoid having to support additional UI methods to
change the cursor color for other (non-TUI) UIs, instead relying on the
TermCursor and TermCursorNC highlight groups.
The TermCursor highlight group is now used in the default 'guicursor'
value, which has a new entry for Terminal mode. However, the
TermCursorNC highlight group is no longer supported: since terminal
windows now use the real cursor, when the window is not focused there is
no cursor displayed in the window at all, so there is nothing to
highlight. Users can still use the StatusLineTermNC highlight group to
differentiate non-focused terminal windows.
BREAKING CHANGE: The TermCursorNC highlight group is no longer supported.
Problem: Two separate try/end wrappers, that only marginally differ by
restoring a few variables. Wrappers that don't restore
previous state are dangerous to use in "api-fast" functions.
Solution: Remove wrappers that don't restore the previous state.
Always use TRY_WRAP.
Problem: hard to view an existing buffer in the preview window
Solution: add the :pbuffer command (Yinzuo Jiang)
Similar as `:pedit` and `:buffer` command. `:pbuffer` edits buffer [N]
from the buffer list in the preview window.
`:pbuffer` can also open special buffer, for example terminal buffer.
closes: vim/vim#16222a2a2fe841e
Cherry-pick Test_popup_and_previewwindow_dump() changes from patch
9.0.0625.
Cherry-pick Run_noroom_for_newwindow_test() changes from patches
8.2.0432 and 9.0.0363.
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: exclusive selection not respected when re-selecting block mode
(Matt Ellis)
Solution: advance selection by another character when using
selection=exclusive and visual block mode
fixes: vim/vim#16202closes: vim/vim#16219bb95589473
Co-authored-by: Christian Brabandt <cb@256bit.org>
1) move the section at :h inclusive-motion-selection-exclusive a few
lines below, so that it doesn't live in between the 2 exceptions.
2) remove the tag :h :!-range. It's not accurate (because it is actually
a filter) and this command is already described at :h :range!
0a4e57f44a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
- API functions using `try_start` directly, do not surface the
underlying error message, and instead show generic messages.
- Error-handling code is duplicated in the API impl.
- Failure modes are not tested.
Solution:
- Use `TRY_WRAP`.
- Add tests.
Problem:
Regression from de794f2d24: `vim.diagnostic.setqflist{open=true}` attempts to
open the location list instead of the diagnostics quickfix list if it didn't
exist before. This is because we are using `qf_id` to decide which to open, but
`qf_id=nil` when there is no existing diagnostics quickfix list with a given
title ("Diagnostics" by default).
Solution:
- Revert to using `loclist` to decide which to open.
- Add tests.
Problem:
- API functions using `try_start` directly instead of `TRY_WRAP`, do not
surface the underlying error message, and instead show generic things
like "Failed to set buffer".
- Error handling code is duplicated in the API impl, instead of
delegating to the vim buffer/window handling logic.
Solution:
- Use `TRY_WRAP`.
"wininfo" is going to be my next victim. The main problem with wininfo
is that it is "all or nothing", i e either all state about a buffer in a
window is considered valid or none of it is. This needs to be fixed to
address some long running grievances.
For now this is just a warmup: refactor it from a linked list to a
vector.
## Problem
With 'winfixbuf' enabled, `nvim_win_set_buf` and `nvim_set_current_buf` fail
even if targeting the already-current buffer.
vim.wo.winfixbuf = true
vim.api.nvim_win_set_buf(0, 0)
vim.api.nvim_set_current_buf(0)
Solution:
Check for this condition.
Problem: style issues in insexpand.c
Solution: add braces, use ternary operator to improve style
(glepnir)
closes: vim/vim#162106e19993991
vim-patch:9.1.0922: wrong MIN macro in popupmenu.c
vim-patch:9.1.0923: too many strlen() calls in filepath.c
vim-patch:9.1.0924: patch 9.1.0923 causes issues
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Since e049c6e4c0, most statusline-like UI elements can combine
highlight attrs, except for sign/statuscolumn.
Solution:
Implement for sign/statuscolumn.
Problem:
An LSP configuration that creates client with no root_dir or
workspace_folders can result in vim.lsp.enable attaching to it multiple
times.
Solution:
When checking existing clients, reuse a client if it wasn't initially
configured have any workspace_folders. This more closely matches the
behaviour we had prior to d9235ef
Problem: wrong MIN macro in popupmenu.c (after v9.1.0921)
(zeertzjq)
Solution: change it to MAX()
618c4d36ca
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: popupmenu logic is a bit convoluted
Solution: slightly refactor logic and use MIN/MAX() macros to simplify
(glepnir)
Define the MAX/MIN macros. Since we support some older platforms, C
compilers may not be as smart. This helps reduce unnecessary if
statements and redundant ternary expressions. Pre-calculate some
expressions by defining variables. Remove unnecessary parentheses.
Adjust certain lines to avoid exceeding 80 columns.
closes: vim/vim#16205c942f84aad
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: some assembler are files not recognized
Solution: detect '*.nasm' files as nasm filetype and '*.masm' as masm
filetype (Wu, Zhenyu)
closes: vim/vim#16194d66d68763d
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Previously, when updating the quickfix diagnostics list, we'd update it,
and then open the quickfix buffer, but there was no guarantee that the
quickfix buffer would be displaying the quickfix diagnostics list (it
could very possibly be displaying some other quickfix list!).
This fixes things so we first select the quickfix list before opening the
quickfix buffer. If `open` is not specified, the behavior is the same as
before: we update the diagnostics quickfix list, but do not navigate to
it.
fixes https://github.com/neovim/neovim/issues/31540
**Problem:**
The brackets in the RFC2732 regular expression are currently unescaped,
causing them to be misinterpreted as special characters denoting
character groups rather than as literal characters.
**Solution:**
Escape the brackets.
Fix#31270
Problem: Float preview window still exist when back at original.
Or no info item is selected.
Solution: if selected is -1 or no info is selected, if float preview
window exist close it first.
**Problem:** Currently, it is difficult to get node(s)-level metadata
for a capture returned by `get_captures_at_pos()`. This is because it is
stored in `metadata[id]` and we do not have access to the value of `id`,
so to get this value we have to iterate over the keys of `metadata`. See
[this commit](d636229300 (diff-8bd4742121c2f359d0345f3c6c253a58220f1a28670cc4e1c957992232059a6cR16)).
Things would be much simpler if we were given the `id` of the capture so
we could use it to just index `metadata` directly.
**Solution:** Include `id` in the data returned by
`get_captures_at_pos()`
Design goals/requirements:
- Default configuration of a server can be distributed across multiple sources.
- And via RTP discovery.
- Default configuration can be specified for all servers.
- Configuration _can_ be project specific.
Solution:
- Two new API's:
- `vim.lsp.config(name, cfg)`:
- Used to define default configurations for servers of name.
- Can be used like a table or called as a function.
- Use `vim.lsp.confg('*', cfg)` to specify default config for all
servers.
- `vim.lsp.enable(name)`
- Used to enable servers of name. Uses configuration defined
via `vim.lsp.config()`.
- Problem: cannot replace the initial bufwrite message (from `filemess`) by the final one (`"test.lua" [New] 0L, 0B written`), when using `vim.ui_attach`.
- Solution: add kind to both messages.
