Some LSP servers (tailwindcss, rome) are known to request registration
for `workspace/didChangeWatchedFiles` even when the corresponding client
capability does not advertise support. This change adds an extra check
in the `client/registerCapability` handler not to start a watch unless
the client capability is set appropriately.
Problem: With 'smoothscroll' cursor may move below botline.
Solution: Call redraw_later() if needed, Compute cursor row with adjusted
condition. (Luuk van Baal, closesvim/vim#12415)
d49f646bf5
Problem: Display moves up and down with 'incsearch' and 'smoothscroll'.
Solution: Do not check if w_skipcol changed. (Luuk van Baal, closesvim/vim#12410,
closesvim/vim#12409)
0222c2d103
Uncrustify is sensitive to version changes, which causes friction for
contributors that doesn't have that exact version. It's also simpler to
download and install the correct version than to have bespoke version
checking.
Problem: Display wrong when moving cursor to above the top line and
'smoothscroll' is set.
Solution: Call adjust_skipcol() in more places and make it work better.
(Luuk van Baal, closesvim/vim#12395)
798fa76dbf
Problem: Display errors when making topline shorter and 'smoothscroll' is
set.
Solution: Reset w_skipcol when the topline becomes shorter than its current
value. (Luuk van Baal, closesvim/vim#12367)
5d01f86d99
Problem: Line not fully displayed if it doesn't fit in the screen.
Solution: Do not reset s_skipcol if not needed. (Luuk van Baal,
closesvim/vim#12376)
6c018680be
Problem: Cursor moves to wrong line when 'foldmethod' is "diff". (Rick
Howe)
Solution: Adjust logic for scrolling. (Luuk van Baal, closesvim/vim#12364,
closesvim/vim#12218)
aa6ba308a1
Problem: 'smoothscroll' does not always work properly.
Solution: Do not reset w_skipcol after it was intentionally set. (Luuk van
Baal, closesvim/vim#12360, closesvim/vim#12199, closesvim/vim#12323)
3ce8c38915
Problem: Making a mapping work in all modes is complicated.
Solution: Add the <Cmd> special key. (Yegappan Lakshmanan, closesvim/vim#7282,
closes 4784, based on patch by Bjorn Linse)
957cf67d50
Change docs to match Vim if it's wording is better.
Change error numbers to match Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Search stats not always visible when searching backwards.
Solution: Do not display the top/bot message on top of the search stats.
(Christian Brabandt, closesvim/vim#12322, closesvim/vim#12222)
34a6a3617b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Text scrolls unnecessarily when splitting and 'splitkeep' is not
"cursor".
Solution: Avoid resetting w_skipcol. (Luuk van Baal, closesvim/vim#12334)
b926bf47d6
Problem: Inserting lines when scrolling with 'smoothscroll' set.
Solution: Adjust line height computation for w_skipcol. (Luuk van Baal,
closesvim/vim#12350)
c8502f9b88
This replaces the custom `health{Error,Warning,Success}` highlight
groups with `Diagnostic{Error,Warning,Ok}`, which are defined by
default. Removes the link for `healthHelp`, which was no longer
actually used after #20879.
Revert the change to do_cmdline_cmd() from #5226.
This function is used in many places, so making it different from Vim
leads to small differences from Vim in the behavior of some functions
like execute() and assert_fails(). If DOCMD_VERBOSE really needs to be
removed somewhere, a do_cmdline() call without DOCMD_VERBOSE is also
shorter than a do_cmdline() call with DOCMD_VERBOSE.
Problem: Vim9: builtin function arguments not checked at compile time.
Solution: Add more type checks. (Yegappan Lakshmanan, closesvim/vim#8539)
5b73992d8f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: When setting a shell size smaller than the containing
terminal window through `:winsize` or `:set lines/columns`
the screen is not properly cleared.
Solution: Clear the tui dimensions rather than the grid dimensions.
Problem: Concealed characters do not work correctly.
Solution: Subtract boguscols instead of adding them. (closesvim/vim#11273)
7500866182
Code change is N/A as Nvim has a draw_col variable instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for deleting the end of a long wrapped line.
Solution: Add a test to check the right text is displayed. (Luuk van Baal,
closesvim/vim#12318)
5b10a14098
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Problem: Divide by zero with 'smoothscroll' set and a narrow window.
Solution: Bail out when the window is too narrow.
870219c58c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor positioning and display problems with 'smoothscroll' and
using "zt", "zb" or "zz".
Solution: Adjust computations and conditions. (Yee Cheng Chin,
closesvim/vim#11764)
db4d88c2ad
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' skipcol may be reset unnecessarily.
Solution: Check the line does actually fit in the window.
b21b8e9ed0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' cursor may end up in wrong position.
Solution: Correct the computation of screen lines. (Yee Cheng Chin,
closesvim/vim#11502)
361895d2a1
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Cursor moves too far with 'smoothscroll'.
Solution: Only move as far as really needed. (Yee Cheng Chin, closesvim/vim#11504)
81ba26e9de
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: With 'smoothscroll' cursor is one screen line too far down. (Ernie
Rael)
Solution: Add a test that currently has the wrong result so that a fix can
be made. (issue vim/vim#11436)
75ac25b496
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'smoothscroll' cursor calculations wrong when 'number' is set.
Solution: Correct the code that computes the width. (closesvim/vim#11492)
01ee52bab6
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: With 'smoothscroll' typing "0" may not go to the first column.
Solution: Recompute w_cline_height when needed. Do not scroll up when it
would move the cursor.
d5337efece
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: "precedes" from 'listchars' overwritten by <<< for 'smoothscroll'.
Solution: Keep the "precedes" character.
13cdde3952
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Line number not visisble with 'smoothscroll', 'nu' and 'rnu'.
Solution: Put the ">>>" after the line number instead of on top.
eb4de62931
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor position invalid when scrolling with 'smoothscroll' set.
(Ernie Rael)
Solution: Add w_valid_skipcol and clear flags when it changes. Adjust
w_skipcol after moving the cursor.
2fbabd238a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' and 'scrolloff' non-zero the cursor position
is not properly adjusted in a long line.
Solution: Move the cursor further up or down in the line.
118c235112
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: With 'smoothscroll' the cursor position s not adjusted in a long
line.
Solution: Move the cursor further up or down in the line.
8cf3459878
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: First line not scrolled properly with 'smoothscroll' and
'scrolloff' zero and using "k".
Solution: Make sure the cursor position is visible.
46b54747c5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor line only partly shows with 'smoothscroll' and 'scrolloff'
zero.
Solution: Do not use 'smoothscroll' when adjusting the bottom of the window.
(closesvim/vim#11269)
9bab7a0243
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Negative topline using CTRL-Y with 'smoothscroll' and 'diff'.
(Ernie Rael)
Solution: Only use 'smoothscroll' when 'wrap' is set.
1a58e1d97c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'smoothscroll' not tested with 'number' and "n" in 'cpo'.
Solution: Add tests, fix uncovered problem.
b6aab8f44b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No indication when the first line is broken for 'smoothscroll'.
Solution: Show "<<<" in the first line.
406b5d89e1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: with 'smoothscroll' set CTRL-E does not work properly when
'foldmethod' is set to "indent". (Yee Cheng Chin)
Solution: Merge the code for scroling with folds and 'smoothscroll'.
(closesvim/vim#11262)
6b2d4ff714
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: CTRL-Y does not stop at line 1. (John Marriott)
Solution: Stop at line 1 when 'smoothscroll' is not set. (closesvim/vim#11261)
8df9748edb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot scroll by screen line if a line wraps.
Solution: Add the 'smoothscroll' option. Only works for CTRL-E and CTRL-Y
so far.
f6196f4244
vim-patch:9.0.0641: missing part of the new option code
Problem: Missing part of the new option code.
Solution: Add missing WV_SMS.
bbbda8fd81
Co-authored-by: Bram Moolenaar <Bram@vim.org>
When injections are added or removed make sure to:
- invoke 'changedtree' callbacks for when new trees are added.
- invoke 'changedtree' callbacks for when trees are invalidated
- redraw regions when languagetree children are removed
Problem: Popup menu position wrong in window with toolbar.
Solution: Take the window toolbar into account when positioning the popup
menu. (closesvim/vim#12308)
4e1ca0d9a6
Fixed in the previous commit. Test only.
Instead of nested linked lists, store autocommands in a flat, contiguous
kvec_t, with one kvec_t per event type. Previously patterns were stored
in each node of the outer linked list, so they can be matched only once
on repeating patterns. They are now reference counted and referenced in
each autocommand, and matching is skipped if the pattern repeats. Speeds
up creation and deletion, execution is not affected.
Co-authored-by: ii14 <ii14@users.noreply.github.com>
fix(extmarks): disallow removing extmarks in on_lines callbacks
decor_redraw_start (which runs before decor_providers_invoke_lines) gets
references for the extmarks on a specific line. If these extmarks are
deleted in on_lines callbacks then this results in a heap-use-after-free
error.
Fixes#22801
Problem: Using freed memory when executing delfunc at the more prompt.
Solution: Check function list not changed in another place. (closesvim/vim#11437)
398a26f7fc
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The 'statusline'-format ui elements do not receive right
click events when "mousemodel" is "popup*"
Solution: Do not draw popupmenu and handle click event instead.
Problem: Lines put in non-current window are not displayed. (Marius
Gedminas)
Solution: Don't increment the topline when inserting just above it.
(closesvim/vim#12212)
e7f05a8780
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tee-Object does not create a file if it does not receive input
for example when :grep does not find matches.
and so nvim tries to open a nonexistent errorfile causing an error.
Solution: use tee.exe instead of Tee-Object
This is a more robust method for tagging a packed table as it completely
eliminates the possibility of mistaking an actual table key as the
packed table tag.
