Problem: 'scroll' option can change when setting the statusline or tabline
but the option context is not updated.
Solution: Update the script context when the scroll option is changed as a
side effect. (Christian Brabandt, closesvim/vim#7533)
746670604a
Problem: No 'backspace' value allows ignoring the insertion point.
Solution: Add the "nostop" and 3 values. (Christian Brabandt, closesvim/vim#5940)
aa0489e12d
"set foldcolumn=auto" is documented but not supported.
Support it by making it behave as "auto:1", similar to "signcolumn".
Close https://github.com/neovim/neovim/pull/13561
Problem: MS-Windows: shell commands fail if &shell contains a space.
Solution: Use quotes instead of escaping. (closesvim/vim#4920)
2efc44b3f0
Always double-quote &shell if it contains a space.
Neovim does not support escaping space with backslash, unlike Vim.
N/A patches for version.c:
vim-patch:8.0.1455: if $SHELL contains a space then 'shell' is incorrect
Problem: If $SHELL contains a space then the default value of 'shell' is
incorrect. (Matthew Horan)
Solution: Escape spaces in $SHELL. (Christian Brabandt, closesvim/vim#459)
4bfa8af141
vim-patch:8.2.1194: test failure because shell prompt differs
Problem: Test failure because shell prompt differs.
Solution: Set the shell prompt.
a4dc6f92bb
Problem: Number of status line items is limited to 80.
Solution: Dynamically allocate the arrays. (Rom Grk, closesvim/vim#7181)
8133cc6bf4
The members of stl_item_T have not been prefixed with stl_ contrary to
the vim patch because the amount of stl_ prefixes on single lines of
code in that region was hurtful to readability.
Problem: 'verbose' value 16 causes duplicate output.
Solution: Combine levels 15 and 16 into one message. (Christian Brabandt,
closesvim/vim#6153)
823654bc06
Problem: Spell checking doesn't work for CamelCased words.
Solution: Add the "camel" value in the new option 'spelloptions'.
(closesvim/vim#1235)
362b44bd4a
- TUI: Fix a case where the cursor was not displayed after hiding the
cursor and then setting it to be displayed again.
- Change to reset everything before setting guicursor.
fixes#12800close#12811
Steps to reproduce:
nvim -u NORC
:set termguicolors
:hi nCursor guifg=red guibg=red
:hi iCursor guifg=green guibg=green
:hi cCursor guifg=blue guibg=blue
:set guicursor=n:block-nCursor,i:hor25-iCursor,c:ver25-cCursor
:set guicursor-=c:ver25-cCursor
Actual behaviour: Cursor is a blue vertical.
Expected behaviour: Cursor should be the default color block.
- remove redundant autocmd list
This "grouped" list is useless, it only gets in the way when searching
for event names.
- intro.txt: cleanup
- starting.txt: update, revisit
- doc: `:help bisect`
- mbyte.txt: update aliases 1656367b90. closes#11960
- options: remove 'guifontset'. Why:
- It is complicated and is used by almost no one.
- It is unlikely to be implemented by Nvim GUIs (complicated to parse,
specific to Xorg...).
Since 1c3ca4f18f, 2c1d12d0be, #7836, the "unix" and "slash" behavior
of 'sessionoptions'/'viewoptions' is always enabled, and the flags are
just ignored. There is no reason for that behavior to be configurable.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Sign column takes up space. (Adam Stankiewicz)
Solution: Optionally put signs in the number column. (Yegappan Lakshmanan,
closesvim/vim#4555, closesvim/vim#4515)
394c5d8870
Problem: When evaluating 'statusline' the current window is unknown.
(Daniel Hahler)
Solution: Set "g:actual_curwin" for %{} items. Set "g:statusline_winid"
when evaluationg %!. (closesvim/vim#4406, closesvim/vim#3299)
1c6fd1e100
Problem: The "last used" info of a buffer is under used.
Solution: Add "lastused" to getbufinfo(). List buffers sorted by last-used
field. (Andi Massimino, closesvim/vim#4722)
52410575be
Problem: Having 'pumwidth' default to zero has no merit.
Solution: Make the default 15, as the actual default value.
42443c7d7f
Includes 'pumwidth' documentation changes from 8.0.1531.
Sort 'pum*' option in alphabetical order.
Problem: The minimum width of the popup menu is hard coded.
Solution: Add the 'pumwidth' option. (Christian Brabandt, James McCoy,
closesvim/vim#2314)
a8f04aa275
Traditionally, when navigating to a specific location from the middle of
the jumplist results in shifting the current location to the bottom of
the list and adding the new location after it. This behavior is not
desireable to all users--see, for example
https://vi.stackexchange.com/questions/18344/how-to-change-jumplist-behavior.
Here, another jumplist behavior is introduced. When jumpoptions (a new
option set added here) includes stack, the jumplist behaves like the
tagstack or like history in a web browser. That is, when navigating to
a location from the middle of the jumplist
2 first
1 second
0 third <-- current location
1 fourth
2 fifth
to a new location the locations after the current location in the jump
list are discarded
2 first
1 second
0 third
<-- current location
The result is that when moving forward from that location, the new
location will be appended to the jumplist:
3 first
2 second
1 third
0 new
If the new location is the same
new == second
as some previous (but not immediately prior) entry in the jumplist,
2 first
1 second
0 third <-- current location
1 fourth
2 fifth
both occurrences preserved
3 first
2 second
1 third
0 second (new)
when moving forward from that location.
It would be desireable to go farther and, when the new location is the
same as the location that is currently next in the jumplist,
new == fourth
make the result of navigating to the new location by jumping (e.g. 50gg)
be the same as moving forward in the jumplist
2 first
1 second
0 third
1 new <-- current location
2 fifth
and simply increment the jumplist index. That change is NOT part of
this patch because it would require passing the new cursor location to
the function (setpcmark) from all of its callees. That in turn would
require those callees to know *before* calling what the new cursor
location is, which do they do not currently.
Having the cursor change column can be surprising.
Force startofline in functional and old tests.
Remove the functional breakindent test, as it's a subset of the oldtest one.
Having the cursor change column can be surprising.
Force startofline in functional and old tests.
Remove the functional breakindent test, as it's a subset of the oldtest one.
These options were previously global. A global-local window option
behaves closer to a global option "per default" (i e with :set),
but still supports local behavior via :setl
Also this restores back-compat for nvim_set_option("fcs", ...)
which are currently broken on 0.4.x but worked in earlier versions
Problem: Using a full path is supported for 'directory' but not for
'backupdir'. (Mikolaj Machowski)
Solution: Support 'backupdir' as well. (Christian Brabandt, closesvim/vim#179)
b782ba475a
Previously, the "precedes" character would be rendered on every row
when w_skipcol > 0 (i.e., when viewing a single line longer than the
entire screen), instead of just on the first row. Make sure to only
render it on the first row in this case.
Add a test for this behavior.
Fix documentation for the "precedes" character, which erroneously
stated that it was only active when wrap mode was off.
(Port some refactoring, but ignore "balloon" changes.)
Problem: Cannot use 'balloonexpr' in a terminal.
Solution: Add 'balloonevalterm' and add code to handle mouse movements in a
terminal. Initial implementation for Unix with GUI.
51b0f3701e
Encoding can be utf8, unicode, utf32.
User can choose to omit '-Encoding' to default to 'unicode'.
'ascii' encoding corrupts the following file:
https://www.w3.org/2001/06/utf-8-test/UTF-8-demo.html
Inspect 'foo.txt' with the following code after downloading the file.
Get-Content -Encoding UTF8 UTF-8-demo.html | Out-File -Encoding ascii foo.txt
Problem: Tabline is not always redrawn when something that is used in
'tabline' changes.
Solution: Add ":redrawtabline" so that a plugin can at least cause the
redraw when needed.
e12bab3144
Problem: Misspelled mkspellmem as makespellmem.
Solution: Drop duplicate help entry, fix test. (Naruhiko Nishino, Ken
Takata, closesvim/vim#4437)
076073950c
Problem: Using expressions in a modeline is unsafe.
Solution: Disallow using expressions in a modeline, unless the
'modelineexpr' option is set. Update help, add more tests.
110289e781
Problem: GUI window always resizes when adding/removing a scrollbar,
toolbar, etc.
Solution: Add the 'k' flag in 'guioptions' to keep the GUI window size and
change the number of lines/columns instead. (Ychin, closesvim/vim#703)
8ac441576f
Problem: Cannot see current match position.
Solution: Show "3/44" when using the "n" command and "S" is not in
'shortmess'. (Christian Brabandt, closesvim/vim#4317)
9dfa313919
On Windows we store non-config data in "$XDG_DATA_HOME/nvim-data". But
the "…/site" items in 'runtimepath' did not correctly point to that
location, they used "…/nvim/site".
Fix the init logic to use "…/nvim-data/site".
closes#9910
Nvim notes:
- Nvim does not support "-u DEFAULTS", that change is omitted.
- Also add 'shadafile' as an alias to 'viminfofile'.
- Deprecate 'viminfofile'.
Problem: Not easy to start Vim cleanly without changing the viminfo file.
Not possible to know whether the -i command line flag was used.
Solution: Add the --clean command line argument. Add the 'viminfofile'
option. Add "-u DEFAULTS".
c4da113ef9
Problem: Cannot build without the sandbox.
Solution: Set the secure option instead of using the sandbox. Also restrict
the characters from 'spelllang' that are used for LANG.vim.
(suggested by Yasuhiro Matsumoto)
82e8c92ebe
closes#990closes#9295
- Support for multiple auto-adjusted sign columns.
With this change, having more than one sign on a line, and with the
'auto' setting on 'signcolumn', extra columns will shown automatically
to accomodate all the existing signs.
For example, suppose we have this view:
5147 }
5148
5149 return sign->typenr;
5150 }
5151 }
5152 return 0;
5153 }
5154
We have GitGutter installed, so it tells us about modified lines that
are not commmited. So let's change line 5152:
5147 }
5148
5149 return sign->typenr;
5150 }
5151 }
~ 5152 return 0;
5153 }
5154
Now we add a mark over line 5152 using 'ma' in normal mode:
5147 }
5148
5149 return sign->typenr;
5150 }
5151 }
a ~ 5152 return 0;
5153 }
5154
Previously, Vim/Nvim would have picked only one of the signs,
because there was no support for having multiple signs in a line.
- Remove signs from deleted lines.
Suppose we have highlights on a group of lines and we delete them:
+ 6 use std::ops::Deref;
--+ 7 use std::borrow::Cow;
--+ 8 use std::io::{Cursor};
9 use proc_macro2::TokenStream;
10 use syn::export::ToTokens;
--+ 11 use std::io::Write;
>> 12 use std::ops::Deref;
Without this change, these signs will momentarily accumulate in
the sign column until the plugins wake up to refresh them.
+ --+ --+ --+ >> 6
Discussion: It may be better to extend the API a bit and allow this
to happen for only certain types of signs. For example, VIM marks
and vim-gitgutter removal signs may want to be presreved, unlike
line additions and linter highlights.
- 'signcolumn': support 'auto:NUM' and 'yes:NUM' settings
- sort signs according to id, from lowest to highest. If you have
git-gutter, vim-signature, and ALE, it would appear in this order:
git-gutter - vim-signature - ALE.
- recalculate size before screen update
- If no space for all signs, prefer the higher ids (while keeping the
rendering order from low to high).
- Prevent duplicate signs. Duplicate signs were invisible to the user,
before using our extended non-standard signcolumn settings.
- multi signcols: fix bug related to wrapped lines.
In wrapped lines, the wrapped parts of a line did not include the extra
columns if they existed. The result was a misdrawing of the wrapped
parts. Fix the issue by:
1. initializing the signcol counter to 0 when we are on a wrap boundary
2. allowing for the draw of spaces in that case.
Why?
- Because we can.
- Because the TUI is just another GUI™
- Because it looks kinda nice, and provides useful context like 1 out of 100
times
Complies with "don't pay for what you don't use".
Some crashes for resizing were unfolded, add tests for those.
Makes the 'scrollback' option more consistent (same default for all buffers) and future-proof.
- Default to -1 for all buffers, but treat it as an implementation detail.
- Document range of 1 - 100_000.
- New terminal buffer by default sets scrollback=10_000 if the global default is -1.
- Existing terminal buffer: On entering terminal-mode or on refresh, if the user explicitly did `:set[local] scbk=-1`, the local value goes to 100_000 (max). (This is undocumented on purpose. Users should work with explicit values in the range of 1-100_000.)
Problem: Showing two characters for tab is limited.
Solution: Allow for a third character for "tab:" in 'listchars'. (Nathaniel
Braun, Ken Takata, closesvim/vim#3810)
83a52171ba
Using 'listchars' is a nice way to highlight tabs that were included by accident
for buffers that set 'expandtab'.
But maybe one does not want this for buffers that set 'noexpandtab', so now one
can use:
autocmd FileType go let &l:listchars .= ',tab: '
Problem: It is not so easy to write a script that works with both Python 2 and Python 3, even when the Python code works with both.
Solution: Add 'pyxversion', :pyx, etc. (Marc Weber, Ken Takata)
f42dd3c390
The purpose of the {Nvim} hint was not well-defined, and its usage
inconsistent. It's also unnecessary.
Nvim-Vim differences are centralized at:
:help vim-differences
Removed things are centralized at:
:help deprecated
Developer guidelines for documentation are listed at:
:help dev-doc
Problem: Using an external diff program is slow and inflexible.
Solution: Include the xdiff library. (Christian Brabandt)
Use it by default.
e828b7621c
vim-patch:8.1.0360
vim-patch:8.1.0364
vim-patch:8.1.0366
vim-patch:8.1.0370
vim-patch:8.1.0377
vim-patch:8.1.0378
vim-patch:8.1.0381
vim-patch:8.1.0396
vim-patch:8.1.0432
By historical accident, Nvim defaults to background=light. So on a dark
background, `:colorscheme default` looks completely wrong.
The "smart" logic that Vim uses is confusing for anyone who uses Vim on
multiple platforms, so rather than mimic that, pick the (hopefully) most
common default.
- Since Neovim is dark-powered, we assume most users have dark backgrounds.
- Most of the GUIs tend to have a dark background by default.
ref #6289
Update runtime files.
fc65cabb15
---
vim-patch:8.0.1279: initializing menus can be slow
Problem: Initializing menus can be slow, especially when there are many
keymaps, color schemes, etc.
Solution: Do the globbing for runtime files lazlily. (Ken Takata)
