1) move the section at :h inclusive-motion-selection-exclusive a few
lines below, so that it doesn't live in between the 2 exceptions.
2) remove the tag :h :!-range. It's not accurate (because it is actually
a filter) and this command is already described at :h :range!
0a4e57f44a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
- API functions using `try_start` directly, do not surface the
underlying error message, and instead show generic messages.
- Error-handling code is duplicated in the API impl.
- Failure modes are not tested.
Solution:
- Use `TRY_WRAP`.
- Add tests.
Problem:
Regression from de794f2d24: `vim.diagnostic.setqflist{open=true}` attempts to
open the location list instead of the diagnostics quickfix list if it didn't
exist before. This is because we are using `qf_id` to decide which to open, but
`qf_id=nil` when there is no existing diagnostics quickfix list with a given
title ("Diagnostics" by default).
Solution:
- Revert to using `loclist` to decide which to open.
- Add tests.
Problem:
- API functions using `try_start` directly instead of `TRY_WRAP`, do not
surface the underlying error message, and instead show generic things
like "Failed to set buffer".
- Error handling code is duplicated in the API impl, instead of
delegating to the vim buffer/window handling logic.
Solution:
- Use `TRY_WRAP`.
"wininfo" is going to be my next victim. The main problem with wininfo
is that it is "all or nothing", i e either all state about a buffer in a
window is considered valid or none of it is. This needs to be fixed to
address some long running grievances.
For now this is just a warmup: refactor it from a linked list to a
vector.
## Problem
With 'winfixbuf' enabled, `nvim_win_set_buf` and `nvim_set_current_buf` fail
even if targeting the already-current buffer.
vim.wo.winfixbuf = true
vim.api.nvim_win_set_buf(0, 0)
vim.api.nvim_set_current_buf(0)
Solution:
Check for this condition.
Problem: style issues in insexpand.c
Solution: add braces, use ternary operator to improve style
(glepnir)
closes: vim/vim#162106e19993991
vim-patch:9.1.0922: wrong MIN macro in popupmenu.c
vim-patch:9.1.0923: too many strlen() calls in filepath.c
vim-patch:9.1.0924: patch 9.1.0923 causes issues
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Since e049c6e4c0, most statusline-like UI elements can combine
highlight attrs, except for sign/statuscolumn.
Solution:
Implement for sign/statuscolumn.
Problem:
An LSP configuration that creates client with no root_dir or
workspace_folders can result in vim.lsp.enable attaching to it multiple
times.
Solution:
When checking existing clients, reuse a client if it wasn't initially
configured have any workspace_folders. This more closely matches the
behaviour we had prior to d9235ef
Problem: wrong MIN macro in popupmenu.c (after v9.1.0921)
(zeertzjq)
Solution: change it to MAX()
618c4d36ca
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: popupmenu logic is a bit convoluted
Solution: slightly refactor logic and use MIN/MAX() macros to simplify
(glepnir)
Define the MAX/MIN macros. Since we support some older platforms, C
compilers may not be as smart. This helps reduce unnecessary if
statements and redundant ternary expressions. Pre-calculate some
expressions by defining variables. Remove unnecessary parentheses.
Adjust certain lines to avoid exceeding 80 columns.
closes: vim/vim#16205c942f84aad
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: some assembler are files not recognized
Solution: detect '*.nasm' files as nasm filetype and '*.masm' as masm
filetype (Wu, Zhenyu)
closes: vim/vim#16194d66d68763d
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Previously, when updating the quickfix diagnostics list, we'd update it,
and then open the quickfix buffer, but there was no guarantee that the
quickfix buffer would be displaying the quickfix diagnostics list (it
could very possibly be displaying some other quickfix list!).
This fixes things so we first select the quickfix list before opening the
quickfix buffer. If `open` is not specified, the behavior is the same as
before: we update the diagnostics quickfix list, but do not navigate to
it.
fixes https://github.com/neovim/neovim/issues/31540
**Problem:**
The brackets in the RFC2732 regular expression are currently unescaped,
causing them to be misinterpreted as special characters denoting
character groups rather than as literal characters.
**Solution:**
Escape the brackets.
Fix#31270
Problem: Float preview window still exist when back at original.
Or no info item is selected.
Solution: if selected is -1 or no info is selected, if float preview
window exist close it first.
**Problem:** Currently, it is difficult to get node(s)-level metadata
for a capture returned by `get_captures_at_pos()`. This is because it is
stored in `metadata[id]` and we do not have access to the value of `id`,
so to get this value we have to iterate over the keys of `metadata`. See
[this commit](d636229300 (diff-8bd4742121c2f359d0345f3c6c253a58220f1a28670cc4e1c957992232059a6cR16)).
Things would be much simpler if we were given the `id` of the capture so
we could use it to just index `metadata` directly.
**Solution:** Include `id` in the data returned by
`get_captures_at_pos()`
Design goals/requirements:
- Default configuration of a server can be distributed across multiple sources.
- And via RTP discovery.
- Default configuration can be specified for all servers.
- Configuration _can_ be project specific.
Solution:
- Two new API's:
- `vim.lsp.config(name, cfg)`:
- Used to define default configurations for servers of name.
- Can be used like a table or called as a function.
- Use `vim.lsp.confg('*', cfg)` to specify default config for all
servers.
- `vim.lsp.enable(name)`
- Used to enable servers of name. Uses configuration defined
via `vim.lsp.config()`.
- Problem: cannot replace the initial bufwrite message (from `filemess`) by the final one (`"test.lua" [New] 0L, 0B written`), when using `vim.ui_attach`.
- Solution: add kind to both messages.
Problem: various vartabstop and shiftround bugs when shifting lines
Solution: Fix the bugs, add new tests for shifting lines in various ways
(Gary Johnson)
fixes: vim/vim#14891closes: vim/vim#16193eed63f96d2
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: INT overflow logic can be simplified
Solution: introduce trim_to_int() function
closes: vim/vim#135562b0882fa65
vim-patch:9.0.2138: Overflow logic requires long long
Problem: Overflow logic requires long long
Solution: Define vimlong_T data type to make life easier
for porters
closes: vim/vim#13598fda700cb04
Cherry-pick ops.c change from patch 9.1.0608.
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: [security]: prevent overflow in indenting
Solution: use long long and remove cast to (int)
The shiftwidth option values are defined as being long. However, when
calculating the actual amount of indent, we cast down to (int), which
may cause the shiftwidth value to become negative and later it may even
cause Vim to try to allocate a huge amount of memory.
We already use long and long long variable types to calculate the indent
(and detect possible overflows), so the cast to (int) seems superfluous
and can be safely removed. So let's just remove the (int) cast and
calculate the indent using longs.
Additionally, the 'shiftwidth' option value is also used when determining
the actual 'cino' options. There it can again cause another overflow, so
make sure it is safe in parse_cino() as well.
fixes: vim/vim#13554closes: vim/vim#135553770574e4a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity warns for another overflow in shift_line()
Solution: Test for INT_MAX after the if condition, cast integer values
to (long long) before multiplying.
22a97fc241
Co-authored-by: Christian Brabandt <cb@256bit.org>
