Currently it's not 100% clear that without setting these, using the autocomds
to utilize the `textDocument/documentHighlight` functionality, nothing will
actually be visible since the highlight groups don't have any details. This
just adds in a couple simple extra notes to make sure that's done
Problem: Named function arguments are never optional.
Solution: Support optional function arguments with a default value. (Andy
Massimino, closesvim/vim#3952)
42ae78cfff
Problem: Can't get the exit value in VimLeave or VimLeavePre autocommands.
Solution: Add v:exiting like in Neovim. (Yegappan Lakshmanan, closesvim/vim#7395)
f0068c5154
Rearrange VimVarIndex enums and vimvars[] entries to sync with Vim.
N/A patches for version.c:
vim-patch:8.2.2535: MS-Windows: cannot run all vim9 tests
Problem: MS-Windows: cannot run all vim9 tests.
Solution: Make test_vim9 target work.
723ef5db98
* lsp: client stop cleanups
* Add diagnostic clearing to client.stop() method used by nvim-lspconfig
* Clear diagnostic cache to prevent stale diagnostics on client restart
* lsp: Add test for vim.lsp.diagnostic.reset
Update vim_diff.txt to reflect the following patches:
patch 8.1.1113: making an autocommand trigger once is not so easy
patch 8.2.2128: there is no way to do something on CTRL-Z
patch 8.2.2508: cannot change the character displayed in non existing lines
patch 8.2.2518: 'listchars' should be window-local
Problem: The session file does not restore the alternate file.
Solution: Add ":balt". Works like ":badd" and also sets the buffer as the
alternate file. Use it in the session file. (closesvim/vim#7269,
closesvim/vim#6714)
59d8e56e04
Include minimal test_buffer.vim from patch 8.2.0243 for Test_balt().
Add entry for :balt to runtime/doc/index.txt from vim/vim#7819.
Before #12937, the only way to specify the `$TERM` for a pty job was
through the `TERM` key in the job's opts dict. This was shuttled to the
child process throug a special field on the PtyProcess object and
injected into the environment after forking.
Now that we have a proper way to specify the environment for a job, we
can simply ensure that the env dict has a proper `TERM` set and avoid
the extra shuttling of data around.
This deprecates the use of the `TERM` option, but will still honor it if
present, although at a lower priority than a `TERM` present in the env
dict.
This also fixes#13874 because we're no longer trying to overwrite
`TERM` in the env dict with the special pty `term_name`. Doing so
raises an internal error because of the existing key which, under
certain circumstances, would cause the "hit enter" prompt. However,
since the child process had already forked, there was no way for the
user to acknowledge the prompt and we would just hang there.
`pumvisible()` returns a number, and numbers are always `true` in Lua,
so the return value needs to be checked explicitly.
Using https://github.com/neovim/neovim/pull/12900 as context, it appears
the intention was to move into the `if` branch when the completion popup
is not shown (i.e. `vim.fn.pumvisible() == 0`).
Adds function to notify the user like this:
`:lua vim.notify("hello user")`
embeds log levels vim.log.levels.
you can then reassign vim.notify to for instance
```
function notify_external(msg, log_level, opts)
vim.fn.jobstart({"notify-send", msg })
end
```
We should be consistent in sending the EOL character to servers(I think). Julia expects this to match on bufwrite, or it crashes when vim appends the newline during the write process.
The `workspace/configuration` handler could fail with the following
error if `config.settings` is nil:
runtime/lua/vim/lsp/util.lua:1432: attempt to index local 'settings' (a nil value)"
This ensures that `config.settings` is always initialized to an empty
table.
* Add in clienInfo to initalize_params.
Some servers (like Metals in my case) will actually pull this
info from the initalize_params and display it in the logs. I
know from the server perspective it helps at times to have this
available to pull from to have more details about the client and
version. You can see that this is part of the spec here:
microsoft.github.io/language-server-protocol/specification#initialize
Until we support dynamicRegistration, we should handle the client/registerCapability in core. There are still some language servers that send this request despite dynamicRegistration not being registered client-side (we got an upstream fix for the node ones, but this depends on them bumping vscode-languageserver-node).
This function returns the start and stop value if set else the node's range is used
When the node's range is used, the stop is incremented by 1 to make the search inclusive
Problem: When using ":sleep" the cursor is always displayed.
Solution: Do not display the cursor when using ":sleep!". (Jeremy Lerner,
closesvim/vim#7688)
e2edc2ed4a
Cursor showing/hiding is moved from core to TUI.
":sleep!" behaves the same as ":sleep".
Add support for default start and end row when omitted in the
query:iter_captures and query:iter_matches functions.
When the start and end row values are omitted, the values of the given
node is used. The end row value is incremented by 1 to include the node end
row in the match.
Updated tests and docs accordingly.
while there is some controversy, stdpath('cache') looks like a better fit for logs than stdpath('data'): you can remove logs without preventing nvim to work which fits the XDG_CACHE_HOME definition of `user specific non-essential data files`.
pyright (possibly others) does not send any hint diagnostics if we do not have tagSupport in PublishDiagnosticsClientCapabilities. This PR just adds them.
Problem: No 'backspace' value allows ignoring the insertion point.
Solution: Add the "nostop" and 3 values. (Christian Brabandt, closesvim/vim#5940)
aa0489e12d
Only the plugin/package manager should "manage" after/. Consumers of
nvim_get_runtime_file() should not need to special case it (if your plugin
manager is broken then fix it instead).
Don't use vim.fn.readfile(). Lua can already read files. It is even
better at it than vim script.
expose M.get_query_files(). Listing the queries is essential for user
config debug, and let plugins do fun things with it.
Abstraction-by-obscurity is not useful (plugins can just cargo cult copy
the code anyway, better with public entry points).
Problem: Cannot easily get all the current marks.
Solution: Add getmarklist(). (Yegappan Lakshmanan, closes#6032)
cfb4b47de0
Cherry-pick the column number fix from patch v8.2.0871
because patch v8.2.0871 cannot be fully ported
without the method patches.
Co-authored-by: Peter Wolf <pwolf2310@gmail.com>
Problem: Quickfix entries do not suport a "note" type.
Solution: Add support for "note". (partly by Yegappan Lakshmanan,
closesvim/vim#5527, closesvim/vim#6216)
e928366de5
Change the update of the client.messages.progress table to overwrite only the percentage and message properties on $report, Previously we were overwriting the table which meant client.messages.progress[token].message.title was wiped on report.
before the behaviour of 'mouse' was inconsistent in external UI,
as some remapping logic would check has_mouse() and others don't
(no difference in TUI or vim classic). With this change, the behaviour
is consistently up to the UI decide (see ui.txt edit)
Behaviour of tui.c is unaffected by this change.
Problem: Cannot navigate to errors before/after the cursor.
Solution: Add the :cbefore and :cafter commands. (Yegappan Lakshmanan,
closesvim/vim#4340)
cf6a55c4b0
Problem: No error for quickfix commands with negative range.
Solution: Add ADDR_UNSIGNED and use it for quickfix commands. Make
assert_fails() show the command if the error doesn't match.
25190db225
N/A patches for version.c:
vim-patch:8.2.0113: "make cmdidxs" fails
Problem: "make cmdidxs" fails.
Solution: Allow address for ":cquit". Add --not-a-term to avoid a delay.
9b24dfcb9f
Problem: Cannot see the selection type in :reg output. (Ayberk Aydın)
Solution: Add c/l/b. (Christian Brabandt, closesvim/vim#5110, closesvim/vim#4546)
3691f1ee72
Patch v8.1.0999 is not ported so ":registers" does not omit register 1.
When using "au User LspDiagnosticsChanged redrawstatus!", modelines get processed again (see h: doautocmd). Fortunately this can be suppressed using the <nomodeline> flag. this replaces every doautocmd call, that issues a User command, with doautocmd <nomodeline>.
"set foldcolumn=auto" is documented but not supported.
Support it by making it behave as "auto:1", similar to "signcolumn".
Close https://github.com/neovim/neovim/pull/13561
According to the specification[1] the payload must look like this:
interface DidSaveTextDocumentParams {
/**
* The document that was saved.
*/
textDocument: TextDocumentIdentifier;
/**
* Optional the content when saved. Depends on the includeText value
* when the save notification was requested.
*/
text?: string;
}
`text` must be on the same level as `textDocument´.
Where `TextDocumentIdentifier` is:
interface TextDocumentIdentifier {
/**
* The text document's URI.
*/
uri: DocumentUri;
}
[1]: https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocument_didSave
- If the shada file is set with shada option n, use it.
- If the shadafile is NONE, it does not check for file read/write access.
- If the shada file does not exist, try to create it.
Apparently the new version of LuaJIT changed the consistency with which it
sorted table dictionaries. IIRC lua sorts dictionary keys by memory address, so
it would appear that the reasons tests were previously passing was because of
a differentiation in the implementation of the lua runtime.
Ensure that array fields in the lsp protocol tables are consistently created,
by using ipair when generating arrays for completionItemKind and
symbolItemKind.
For CodeActionKind, the current implementation includes both the keys and the
values in the array. This is incorrect. Ensure that only the values are
included in the array and sort them for consistency.
Opt in to this secret world using
set wildchar=0
" already the default, but remove if non-zero existing config:
set wildcharm=0
now you can map 'wildmode' just like any mode:
cnoremap <tab> <c-z>
function! Spacey()
return getcmdline()[-1:] == "/" ? "\<bs>" : ""
endfunc
cnoremap <expr> / wildmenumode() ? Spacey()."/<c-z>" : "/"
Possibly asked questions:
What about backwards compatibility?
====
Just do nothing and your existing 'wildchar' and 'wildcharm' will keep working.
Doesn't `<c-z>` mean suspend?
====
Not in cmdline mode. If it would then the recommended wildcharm would not
have been `<c-z>` to start with.
My config relies on `:<c-z>` being a synonym to `:<nop>`!
====
just no.
Here I use a negative number to decide whether the count has been
explicitly set. I think it unlikely that negative sections will ever be
created given that negative numbers complicate argument handling:
```
$ man -1 foo
man: invalid option -- '1'
```
and given that there's already precedence for alphanumeric sections like
`3p`, `3x`, `n`, etc.
---
This does work, though:
```
$ man -S -3 baz
```
With `man baz.-3` and `man 'baz(-3)'`, (GNU) man *might* consider `-3`
internally as a section, but in the end reports as if the whole
argument was the name of a topic:
```
$ man 'baz(-3)'
No manual entry for baz(-3)
```
---
Closes#13411.
* First implementation of workspace folders
* Add completion for current directory
* Add tracking of workspace folders
* Add workspace folder listing
* Add checks on adding/removing workspaces
* Add appropriate initialization options
* Add documentation
* Make workspaceFolders available wherever client is
Problem: Cannot get window type for autocmd and preview window.
Solution: Add types to win_gettype(). (Yegappan Lakshmanan, closesvim/vim#6277)
0fe937fd86
Cherry-pick test_preview.vim,test_window_cmd.vim changes
from patch v8.2.0522.
In commit 63f0ca3263, `tagfunc` was introduced to
`runtime/autoload/man.vim`. Nonetheless the tag function instead
of using a short buffer name (e.g. `man://foo(3)`) uses the full
path to the man page (e.g. `man:///usr/share/.../foo.3.gz`). This
behaviour is inconsistent with `:Man!`, thus this commit.
Closes#13334
Problem: MS-Windows: shell commands fail if &shell contains a space.
Solution: Use quotes instead of escaping. (closesvim/vim#4920)
2efc44b3f0
Always double-quote &shell if it contains a space.
Neovim does not support escaping space with backslash, unlike Vim.
N/A patches for version.c:
vim-patch:8.0.1455: if $SHELL contains a space then 'shell' is incorrect
Problem: If $SHELL contains a space then the default value of 'shell' is
incorrect. (Matthew Horan)
Solution: Escape spaces in $SHELL. (Christian Brabandt, closesvim/vim#459)
4bfa8af141
vim-patch:8.2.1194: test failure because shell prompt differs
Problem: Test failure because shell prompt differs.
Solution: Set the shell prompt.
a4dc6f92bb
Implement the LanguageTree structure to enable language injection.
This is done be removing the old Parser metatable and replacing by the
new structure, with the same API (almost).
Some noticeable differences :
- `parser:parse()` now returns a table of trees
- There is no incremental parsing for child (injected) languages
Co-authored-by: Thomas Vigouroux <tomvig38@gmail.com>
