Problem: Not enough testing for the Ruby interface.
Solution: Add more tests. (Dominique Pelle, closesvim/vim#3252)
edd6aacb01
Modified some tests to make them pass for Neovim.
Some tests will always fail because +ruby is externalized in Neovim.
Skip failing ruby tests for now.
Problem: Quickfix buffer shows up in list, can't get buffer number.
Solution: Make the quickfix buffer unlisted when the quickfix window is
closed. get the quickfix buffer number with getqflist().
(Yegappan Lakshmanan, closesvim/vim#4113)
647e24ba3d
Problem: Cannot easily change the current quickfx list index.
Solution: Add the "idx" argument to setqflist(). (Yegappan Lakshmanan,
closesvim/vim#3701)
5b69c22fd2
Problem: Dictionary with string keys is longer than needed.
Solution: Use *{key: val} for literaly keys.
d5abb4c877
Vim's popup,textprop features are N/A.
Neovim has not polyfilled their APIs.
Skip docs and tests for these features.
In #8226 <A-x> and <M-x> were changed to behave like <Esc>x in insert
mode when no mapping exists. This commit backs out that change and
replaces it with a more general one that makes unmapped ALT and META
keypresses as <Esc>+char in all modes. This fixes an unnecessary and
confusing inconsistency between modes.
Problem: 'verbose' value 16 causes duplicate output.
Solution: Combine levels 15 and 16 into one message. (Christian Brabandt,
closesvim/vim#6153)
823654bc06
Problem: Spell checking doesn't work for CamelCased words.
Solution: Add the "camel" value in the new option 'spelloptions'.
(closesvim/vim#1235)
362b44bd4a
- TUI: Fix a case where the cursor was not displayed after hiding the
cursor and then setting it to be displayed again.
- Change to reset everything before setting guicursor.
fixes#12800close#12811
Steps to reproduce:
nvim -u NORC
:set termguicolors
:hi nCursor guifg=red guibg=red
:hi iCursor guifg=green guibg=green
:hi cCursor guifg=blue guibg=blue
:set guicursor=n:block-nCursor,i:hor25-iCursor,c:ver25-cCursor
:set guicursor-=c:ver25-cCursor
Actual behaviour: Cursor is a blue vertical.
Expected behaviour: Cursor should be the default color block.
* docs: Add hint for :help vim.lsp.buf for new users
* fix: Use help linker for vim.lsp.buf
* docs: Extend full api list language. Move gd to bottom. Add note about limited support
* support for :perl, :perlfile, :perldo and perleval()
* document that the perl provider doesn't currently work on Windows
* document that the perl legacy interface is now also supported
* added perleval() documentation
* import legacy perl interface tests
* only perl 5.22+ is supported
* healtcheck: use g:perl_host_prog if its set instead
using just 'perl' isn't correct as it may not be the version requested.
ditto for 'cpanm', rather go through 'App::cpanminus' to find the latest
perl version
- remove redundant autocmd list
This "grouped" list is useless, it only gets in the way when searching
for event names.
- intro.txt: cleanup
- starting.txt: update, revisit
- doc: `:help bisect`
- mbyte.txt: update aliases 1656367b90. closes#11960
- options: remove 'guifontset'. Why:
- It is complicated and is used by almost no one.
- It is unlikely to be implemented by Nvim GUIs (complicated to parse,
specific to Xorg...).
Since 1c3ca4f18f, 2c1d12d0be, #7836, the "unix" and "slash" behavior
of 'sessionoptions'/'viewoptions' is always enabled, and the flags are
just ignored. There is no reason for that behavior to be configurable.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Not so easy to interrupt a script programatically.
Solution: Add the interrupt() function. (Yasuhiro Matsumoto, closesvim/vim#2834)
67a2deb9cb
Problem: Cannot redefine user command without ! in same script
Solution: Allow redefining user command without ! in same script, like with
functions.
55d4691308
Problem: Sign column takes up space. (Adam Stankiewicz)
Solution: Optionally put signs in the number column. (Yegappan Lakshmanan,
closesvim/vim#4555, closesvim/vim#4515)
394c5d8870
* LSP: Add support for call hierarchies
* LSP: Add support for call hierarchies
* LSP: Add support for call hierarchies
* LSP: Jump to call location
Jump to the call site instead of jumping to the definition of the
caller/callee.
* LSP: add tests for the call hierarchy callbacks
* Fix linting error
Co-authored-by: Cédric Barreteau <>
Problem: When evaluating 'statusline' the current window is unknown.
(Daniel Hahler)
Solution: Set "g:actual_curwin" for %{} items. Set "g:statusline_winid"
when evaluationg %!. (closesvim/vim#4406, closesvim/vim#3299)
1c6fd1e100
* Fix some small doc issues
* doc: fixup
* doc: fixup
* Fix lint and rebase
* Remove bad advice
* Ugh, stupid mpack files...
* Don't let people include these for now until they specifically want to
* Prevent duplicate tag
Problem: Syntax foldlevel is taken from the start of the line.
Solution: Add ":syn foldlevel" to be able to use the minimal foldlevel in the line.
e35a52aee7
With `foldmethod=syntax` the foldlevel of a line is computed based
on syntax items on the line. Previously we always used the level
of the syntax item containing the start of the line. This works
well in cases such as:
if (...) {
...
}
else if (...) {
...
}
else {
...
}
which folds like this:
+--- 3 lines: if (...) {---------------------------
+--- 3 lines: else if (...) {----------------------
+--- 3 lines: else {-------------------------------
However, the code:
if (...) {
...
} else if (...) {
...
} else {
...
}
folds like this:
+--- 7 lines: if (...) {---------------------------
We can make the latter case fold like this:
+--- 2 lines: if (...) {---------------------------
+--- 2 lines: } else if (...) {--------------------
+--- 3 lines: } else {-----------------------------
by choosing on each line the lowest fold level that is followed
by a higher fold level.
Add a syntax command
:syntax foldlevel [start | minimum]
to choose between these two methods of computing the foldlevel of
a line.
* lsp: support custom hl groups in show_line_diagnostics
Closes#12472.
* runtime: add docs for the new lsp highlight groups
Co-authored-by: francisco souza <fsouza@users.noreply.github.com>
When UV_OVERLAPPED_PIPE was used for the pipe passed to the child process, a
problem occurred with the standard input of the .Net Framework application
(#11809). Therefore, add the overlapped option to jobstart() and change it so
that it is set only when necessary
The `:lcd -` command, and `:tcd -` which returns to a previous directory, can be done with `:lc -` and `:tc -` respectively.
Basically, the d is optional, so I updated the documentation to indicate this in the traditional format.
* add lua function to highlight yanked region
* extract namespace, better naming, default values
* add default for event argument
* free timer
* factor out mark to position calculation
* d'oh
* make sure timer stops before callback (cf. luv example)
* factor out timer, more documentation
* fixup
* validate function argument for schedule
* fix block selection past eol
* correct handling of multibyte characters
* move arguments around, some cleanup
* move utility functions to vim.lua
* use anonymous namespaces, avoid local api
* rename function
* add test for schedule_fn
* fix indent
* turn hl-yank into proper (hightlight) module
* factor out position-to-region function
mark extraction now part of highlight.on_yank
* rename schedule_fn to defer_fn
* add test for vim.region
* todo: handle double-width characters
* remove debug printout
* do not shadow arguments
* defer also callable table
* whitespace change
* move highlight to vim/highlight.lua
* add documentation
* add @return documentation
* test: add check before vim.defer fires
* doc: fixup
Problem: Cannot delete a match from another window. (Paul Jolly)
Solution: Add window ID argument to matchdelete(), clearmatches(),
getmatches() and setmatches(). (Andy Massimino, closesvim/vim#4178)
aff749145e
* Add textDocument/codeAction
* Add callback for workspace/executeCommand
* Escape newlines in codeAction titles
* Return empty list in get_line_diagnostics if no buffer diagnostics
* Add stub documentation
* Validate context parameter in code_action
* Add support for edit in CodeAction responses
* Group diagnostics by line in vim.lsp.util.get_line_diagnostics()
* Advertise code action literal support
Besides the special-case in get_scrolloff_value(), it makes sense for
'scrolloff' and 'sidescrolloff' to reflect the correct values (for
plugins, scripts, …).
ref 53d607af9c53accfd634435908fb79061f1212b9
ref #11915
ref #12230
* lsp: add workspace/symbol
* refactor symbol callback
* set hierarchical symbol support to true
* add documentation and default mapping
Co-authored-by: Hirokazu Hata <h.hata.ai.t@gmail.com>
This commit creates 4 new highlight groups:
- LspDiagnosticsErrorSign
- LspDiagnosticsWarningSign
- LspDiagnosticsInformationSign
- LspDiagnosticsHintSign
These highlight groups are linked to their corresponding LspDiagnostics
highlight groups by default.
This lets users choose a different color for their sign columns and
virtualtext diagnostics.
