A bit big, but practically it was a lot simpler to change over all
fillchars and all listchars at once, to not need to maintain two
parallel implementations.
This is mostly an internal refactor, but it also removes an arbitrary
limitation: that 'fillchars' and 'listchars' values can only be
single-codepoint characters. Now any character which fits into a single
screen cell can be used.
Improve error messages for `:InspectTree`, when no parsers are available
for the current buffer and filetype. We can show more informative and
helpful error message for users (e.g., which lang was searched for):
```
... No parser available for the given buffer:
+... no parser for 'custom_ft' language, see :help treesitter-parsers
```
Also improve the relevant docs for *treesitter-parsers*.
buf is a pointer argument, not a local char array, so sizeof(buf) is just the size of a pointer type on the platform. This is always an incorrect value, but on 32-bit platforms it actually has an impact, since sizeof(buf) is just 4 and causes the buffer to get truncated.
Problem: `IncSearch` is currently linked to `Search` which makes it not
usable for its purpose of showing current match with 'incsearch' and
confirming matches after `:s///c`.
Solution: Link it to `CurSearch`.
Since execl() is a variadic function, it requries a NULL-terminal to
indicate the end of its argument list, c.f. exec(3)
> The first argument, by convention, should point to the filename
> associated with the file being executed. The list of arguments *must*
> be terminated by a null pointer
This fixes the failure seen on aarch64 and i386, due to garbage data
being considered part of the variadic arguments.
Problem: incorrect use of W_WINROW in edit.c
Solution: compare against curwin->w_height instead
Remove incorrect use of W_WINROW
In structs.h it is mentioned that w_wrow is relative to w_winrow, so
using W_WINROW doesn't make sense when comparing with window height.
This change won't lead to any observable behavior change:
The condition intends to check if there are 'scrolloff' lines between
the current cursor when the bottom of the window. When W_WINROW(curwin)
is added to curwin->w_height - 1 - get_scrolloff_value(), the condition
is instead satisfied when the cursor is on some screen line below that
position. However,
- If 'scrolloff' is smaller than half the window height, this condition
can only be satisfied when W_WINROW(curwin) == 0. And if it is not
satisfied, update_topline() does the actual scrolling.
- If 'scrolloff' is larger than half the window height, update_topline()
will put the cursor at the center of the window soon afterwards
anyway, because set_topline() now unsets VALID_TOPLINE flag starting
from 7db7bb45b0.
To put it in another way, 7db7bb45b0
makes the update_topline() just below correct the mistakes made in this
block, so this incorrect use of W_WINROW() no longer affects observable
behavior.
closes: vim/vim#12331b1ed7ec9f7
Problem: regression with empty inner blocks introduced
(after v9.1.0007)
Solution: Set correct cursor position, Check for visual mode
being active (Maxim Kim)
relates: vim/vim#13514closes: vim/vim#138193779516988
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: can select empty inner text blocks
(laurentalacoque)
Solution: make selecting empty inner text blocks an error
textobjects: Make selecting inner empty blocks an error
fixes: vim/vim#13514closes: vim/vim#13523ad4d7f446d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: vim/vim#1369281642d9d6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
tmux indicates its RGB support via setrgbb and setrgbf. In modern tmux
code, Tc and RGB just set setrgbb and setrgbf, so we can just check for
them.
Link: 7eb496c00c
Problem: The maximum 'statuscolumn' width and grow behavior is undocumented.
Solution: Define, use and document the maximum 'statuscolumn' width and grow behavior.
Problem:
Many decoration providers (treesitter injection highlighting, semantic
token highlighting, inlay hint) rely on the correctness of the `botline`
argument of `on_win` callback. However, `botline` can be smaller than
the actual line number of the last displayed line if some lines are
folded. In such cases, some decorations will be missing in the lines not
covered by `botline`.
Solution:
Validate `botline` when invoking `on_win`.
NOTE:
It seems that the old code was deliberately avoiding this presumably due
to performance reasons. However, I haven't experienced noticeable lag
after this change, and I believe the cost of botline computation would
be much smaller than the cost of decoration providers.
runtime(vim): Add support for <ScriptCmd> syntax (vim/vim#10686)
Adding `<ScriptCmd>` to list of angle-bracket notation syntax, just like `<Cmd>`
`<Cmd>` is already highlighted.
```vim
nnoremap <leader>o <Cmd>Oldfiles()<CR>
```
`<ScriptCmd>` is not.
80beeef0c6
Co-authored-by: dezza <402927+dezza@users.noreply.github.com>
Avoid `prevwin == curwin` when closing `curwin`
Problem: When closing the current window (or when moving it to a tabpage), the
previous window may refer to the new current window
(`winnr() == winnr('#')`) if that window is selected as the
new current window.
Solution: Set `prevwin = NULL` when switching away from an invalid `curwin` and
the target window was the `prevwin`.
(Sean Dewar)
related: vim/vim#4537closes: vim/vim#13762bf44b69d1f
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: reloading colorscheme when not changing 'background'
Solution: Check, if the background option value actually changed,
if not, return early.
Only reload colorscheme when bg is changed
Currently the highlight groups are re-initialized and the colorscheme
(if any) is reloaded anytime 'background' is set, even if it is not
changed. This is unnecessary, because if the value was not changed then
there is no need to change highlight groups or do anything with the
colorscheme. Instead, only reload the colorscheme if the value of
'background' was actually changed.
closes: vim/vim#1370083ad2726ff
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: a closing fold expression may unexpectedly start a new fold
when it should end a fold
(reported by Shota Nozaki)
Solution: if a fold hasn't started yet, do not immediately
start a new fold with level 1
(Shota Nozaki)
fixes: vim/vim#12768closes: vim/vim#137480689b87059
Co-authored-by: Shota Nozaki <emonkak@gmail.com>
Problem:
Currently `deepcopy` hashes every single tables it copies so it can be
reused. For tables of mostly unique items that are non recursive, this
hashing is unnecessarily expensive
Solution:
Port the `noref` argument from Vimscripts `deepcopy()`.
The below benchmark demonstrates the results for two extreme cases of
tables of different sizes. One table that uses the same table lots of
times and one with all unique tables.
| test | `noref=false` (ms) | `noref=true` (ms) |
| -------------------- | ------------------ | ----------------- |
| unique tables (50) | 6.59 | 2.62 |
| shared tables (50) | 3.24 | 6.40 |
| unique tables (2000) | 23381.48 | 2884.53 |
| shared tables (2000) | 3505.54 | 14038.80 |
The results are basically the inverse of each other where `noref` is
much more performance on tables with unique fields, and `not noref` is
more performant on tables that reuse fields.
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable stylua for entire `test/` directory.
- Exclude these high-churn files until this issue is resolved: https://github.com/JohnnyMorganz/StyLua/issues/829
```
test/functional/ui/decorations_spec.lua | 3560 ++++++++++++++++++++++++++++++++++++----------------
test/functional/ui/float_spec.lua | 5826 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/multigrid_spec.lua | 1349 ++++++++++++++------
```
- Make surgical changes to these files (or add `stylua: ignore` in some
small scopes) to improve the result:
```
test/functional/vimscript/msgpack_functions_spec.lua | 1414 +++++++++++++++------
test/functional/api/buffer_spec.lua | 1389 +++++++++++----------
test/functional/api/vim_spec.lua | 2740 +++++++++++++++++++++++-----------------
```
- These "high churn" files are NOT excluded because the changes are
largely an improvement:
```
test/functional/plugin/lsp_spec.lua | 2198 ++++++++++++++++++---------------
test/functional/plugin/shada_spec.lua | 4078 +++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/cmdline_spec.lua | 1199 +++++++++++-------
test/functional/ui/popupmenu_spec.lua | 1267 +++++++++++--------
test/functional/ui/messages_spec.lua | 1643 +++++++++++++++---------
```
- TODO: how to check "all directories"? With `GLOB_DIRS *` and `/.deps/` (or
`.deps/`) in `.styluaignore`, Lua code in `.deps/` is still checked...
buf_ensure_loaded already checks `(buf->b_ml.ml_mfp != NULL)`. #25823
TODO:
- #10070#13201 All buffer-related API functions except
`nvim_buf_is_loaded` (and `nvim_buf_is_valid`?) should always call
`buf_ensure_loaded`. Because the _common case_ is that plugins expect
the buffer to "just work"—and for the uncomon, performance-sensitive
case, the script can check `nvim_buf_is_loaded` to avoid implicitly
loading a buffer.
- Update documentation to clarify the above semantics.
Since some point INCLUDE_DEPRECATED stopped working as it is usually
turned off when generating an actual vimdoc. This commit fixes this
hidden feature back again (used for devel purposes only).
Problem: main() has too much logic implemented there, too difficult to
read.
Solution: Do more OOP, introduce `Section` dataclass that stores
information about a "section", with documentation and concrete examples
about what each field and variable would mean. Extract all the lines for
rendering a section into `section.render()` pulled out of `main()`.
Problem:
For function definitions to be included in the vimdoc (formatted) and
to be exported as mpack data (unformatted), we had two internal
representations of the same function/API metadata in duplicate;
one is FunctionDoc (which was previously a dict), and the other is
doxygen XML DOM from which vimdoc (functions sections) was generated.
Solution:
We should have a single path and unified data representation
(i.e. FunctionDoc) that contains all the metadata and information about
function APIs, from which both of mpack export and vimdoc are generated.
I.e., vimdocs are no longer generated directly from doxygen XML nodes,
but generated via:
(XML DOM Nodes) ------------> FunctionDoc ------> mpack (unformatted)
Recursive Internal |
Formatting Metadata +---> vimdoc (formatted)
This refactoring eliminates the hacky and ugly use of `fmt_vimhelp` in
`fmt_node_as_vimhelp()` and all other helper functions! This way,
`fmt_node_as_vimhelp()` can simplified as it no longer needs to handle
generating of function docs, which needs to be done only in the topmost
level of recursion.