Complement "g:java_ignore_javadoc" with "g:java_ignore_html"
and "g:java_ignore_markdown" to allow selectively disabling
the recognition of HTML and CommonMark respectively.
(Note that this is not a preview feature.)
======================== LIMITATION ========================
According to the syntactical details of JEP 467:
> Any leading whitespace and the three initial / characters
> are removed from each line.
>
> The lines are shifted left, by removing leading whitespace
> characters, until the non-blank line with the least
> leading whitespace has no remaining leading whitespace.
>
> Additional leading whitespace and any trailing whitespace
> in each line is preserved, because it may be significant.
the following example:
------------------------------------------------------------
/// A summary sentence.
/// A list:
/// - Item A.
/// - Item B.
///
/// Some code span, starting here `
/// 1 + 2 ` and ending at the previous \`.
------------------------------------------------------------
should be interpreted as if it were written thus:
------------------------------------------------------------
///A summary sentence.
/// A list:
/// - Item A.
/// - Item B.
///
/// Some code span, starting here `
/// 1 + 2 ` and ending at the previous \`.
------------------------------------------------------------
Since automatic line rewriting will not be pursued, parts of
such comments having significant whitespace may be ‘wrongly’
highlighted. For convenience, a &fex function is defined to
‘correct’ it: g:javaformat#RemoveCommonMarkdownWhitespace()
(:help ft-java-plugin).
References:
https://openjdk.org/jeps/467https://spec.commonmark.org/0.31.2closes: vim/vim#1574085f054aa3f
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Co-authored-by: Tim Pope <code@tpope.net>
Problem:
Linematch used to use strchr to navigate a string, however strchr does
not supoprt embedded NULs.
Solution:
Use `mmfile_t` instead of `char *` in linematch and introduce `strnchr()`.
Also remove heap allocations from `matching_char_iwhite()`
Fixes: #30505
Problem: No clear way to check whether parsers are available for a given
language.
Solution: Make `language.add()` return `true` if a parser was
successfully added and `nil` otherwise. Use explicit `assert` instead of
relying on thrown errors.
Problem: Language names are only registered for filetype<->language
lookups when parsers are actually loaded; this means users cannot rely
on `vim.treesitter.language.get_lang()` or `get_filetypes()` to return
the correct value when language and filetype coincide and always need to
add explicit fallbacks.
Solution: Always return the language name as valid filetype in
`get_filetypes()`, and default to the filetype in `get_lang()`. Document
this behavior.
Problem:
Headings in :help do not stand out visually.
Solution:
Define a non-standard `@markup.heading.1.delimiter` group and
special-case it in `highlight_group.c`.
FUTURE:
This is a cheap workaround until we have #25718 which will enable:
- fully driven by `vimdoc/highlights.scm` instead of using highlight
tricks (`guibg=bg guifg=bg guisp=fg`)
- better support of "cterm" ('notermguicolors')
Problem: No way to get prompt for input()/confirm()
Solution: add getcmdprompt() function (Shougo Matsushita)
(Shougo Matsushita)
closes: vim/vim#156676908428560
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Before this PR, the behavior of nvim_paste is:
- When vim.paste() returns false, return false to the client, but treat
following chunks normally (i.e. rely on the client cancelling the
paste as expected).
- When vim.paste() throws an error, still return true to the client, but
drain the following chunks in the stream without calling vim.paste().
There are two problems with such behavior:
- When vim.paste() errors, the client is still supposed to send the
remaining chunks of the stream, even though they do nothing.
- Having different code paths for two uncommon but similar situations
complicates maintenance.
This PR makes both the cancel case and the error case return false to
the client and drain the remaining chunks of the stream, which, apart
from sharing the same code path, is beneficial whether the client checks
the return value of nvim_paste or not:
- If the client checks the return value, it can avoid sending the
following chunks needlessly after an error.
- If the client doesn't check the return value, chunks following a
cancelled chunk won't be pasted on the server regardless, which leads
to less confusing behavior.
In the api_info() output:
:new|put =map(filter(api_info().functions, '!has_key(v:val,''deprecated_since'')'), 'v:val')
...
{'return_type': 'ArrayOf(Integer, 2)', 'name': 'nvim_win_get_position', 'method': v:true, 'parameters': [['Window', 'window']], 'since': 1}
The `ArrayOf(Integer, 2)` return type didn't break clients when we added
it, which is evidence that clients don't use the `return_type` field,
thus renaming Dictionary => Dict in api_info() is not (in practice)
a breaking change.
Define "g:java_syntax_previews" and include number 476 in
its list to enable this recognition:
------------------------------------------------------------
let g:java_syntax_previews = [476]
------------------------------------------------------------
Reference:
https://openjdk.org/jeps/476closes: vim/vim#1570950423ab808
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Define "g:java_syntax_previews" and include number 455 in
its list to enable this recognition:
------------------------------------------------------------
let g:java_syntax_previews = [455]
------------------------------------------------------------
Reference:
https://openjdk.org/jeps/455closes: vim/vim#1569823079450a8
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem:
The default builtin UI client does not declare its client info. This
reduces discoverability and makes it difficult for plugins to identify
the UI.
Solution:
- Call nvim_set_client_info after attaching, as recommended by `:help dev-ui`.
- Also set the "pid" field.
- Also change `ui_active()` to return a count. Not directly relevant to
this commit, but will be useful later.
Problem:
It has long been a convention that references to the builtin terminal UI
should mention "tui", not "term", in order to avoid ambiguity vs the
builtin `:terminal` feature. The final step was to rename term.txt;
let's that step.
Solution:
- rename term.txt => tui.txt
- rename nvim_terminal_emulator.txt => terminal.txt
- `gen_help_html.lua`: generate redirects for renamed pages.
Problem:
User cannot configure the tool used by `vim.ui.open` (or `gx`). With
netrw this was supported by `g:netrw_browsex_viewer`.
Solution:
Introduce `opts.cmd`. Users that want to set this globally can
monkey-patch `vim.ui.open` in the same way described at `:help vim.paste()`.
Fixes https://github.com/neovim/neovim/issues/29488
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Stop assigning by default the NonText highlighting group for
javaConceptKind modifiers since its colour is hardly
distinguishable from a background colour for a range of
colour schemes.
fixesvim/vim#15237
related vim/vim#15238closes: vim/vim#156645e95c8f637
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Co-authored-by: Dexter Gaon-Shatford <dexter@gaonshatford.ca>
Previously these would be cached in buffer-local variables and
would not change on :compiler pandoc
closes: vim/vim#15642d30ffdca49
Co-authored-by: Christian Brabandt <cb@256bit.org>
Groff MOM (Macros for Manuscripts) is a macro package for the GNU
troff (groff) typesetting system, a light-weight alternative
to LaTeX for professional-quality documents.
closes: vim/vim#156467cc0e9145d
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Problem: vim.tbl_deep_extend had an undocumented feature where arrays
(integer-indexed tables) were not merged but compared literally (used
for merging default and user config, where one list should overwrite the
other completely). Turns out this behavior was relied on in quite a
number of plugins (even though it wasn't a robust solution even for that
use case, since lists of tables (e.g., plugin specs) can be array-like
as well).
Solution: Revert the removal of this special feature. Check for
list-like (contiguous integer indices) instead, as this is closer to the
intent. Document this behavior.
while at it, also move the note about :wincmd
directly to :h :wincmd, it doesn't seem to belong to the buffer section.
closes: vim/vim#15636b584117b05
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong breakindentopt=list:-1 with multibyte chars or TABs in
text matched by 'formatlistpat' (John M Devin)
Solution: Use the width of the match text (zeertzjq)
fixes: vim/vim#15634closes: vim/vim#1563561a6ac4d00
- The exclusion of lists was never justified in the commit history and is
the wrong thing to do for a function that deals with tables.
- Move the error checks out of the recursive path.
Fixes#23654
Updated the `rpc.connect` function to support connecting to LSP servers
using hostnames, not just IP addresses. This change includes updates to
the documentation and additional test cases to verify the new
functionality.
- Modified `connect` function to resolve hostnames.
- Updated documentation to reflect the change.
- Added test case for connecting using hostname.
Added a TCP echo server utility function to the LSP test suite. This
server echoes the first message it receives and is used in tests to
verify LSP server connections via both IP address and hostname.
Refactored existing tests to use the new utility function.
Problem:
`nvim --listen` does not error on EADDRINUSE. #30123
Solution:
Now that `$NVIM_LISTEN_ADDRESS` is deprecated and input *only* (instead
of the old, ambiguous situation where it was both an input *and* an
output), we can be fail fast instead of trying to "recover". This
reverts the "recovery" behavior of
704ba4151e, but that was basically
a workaround for the fragility of `$NVIM_LISTEN_ADDRESS`.
For context, see https://github.com/neovim/neovim/pull/24738. Before
that PR, Nvim did not correctly handle captures with quantifiers. That
PR made the correct behavior opt-in to minimize breaking changes, with
the intention that the correct behavior would eventually become the
default. Users can still opt-in to the old (incorrect) behavior for now,
but this option will eventually be removed completely.
BREAKING CHANGE: Any plugin which uses `Query:iter_matches()` must
update their call sites to expect an array of nodes in the `match`
table, rather than a single node.
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem: "dvgo" is not always an inclusive motion
(Iain King-Speir)
Solution: initialize the inclusive flag to false
fixes: vim/vim#15580closes: vim/vim#15582f8702aeb8f
Co-authored-by: Christian Brabandt <cb@256bit.org>
Introduce a new API variable "g:java_syntax_previews" whose
value must be a list of syntax preview feature numbers.
Enumerate the currently supported numbers in a table at the
end of the documentation entry for "ft-java-syntax".
Also, disable the recognition of String Templates. Despite
the withdrawal of this preview feature in its proposed form
from the upcoming JDK 23 release and the fact that the JDK
22 release is coming to EOL this September, an earlier
iteration of this preview feature was included in JDK 21
(LTS) whose EOL is projected to fall due in late 2028 and,
therefore, retain the current implementation.
Define "g:java_syntax_previews" and include number 430 in
its list to enable the recognition of String Templates:
------------------------------------------------------------
let g:java_syntax_previews = [430]
------------------------------------------------------------
References:
https://openjdk.org/jeps/430 (Preview)
https://openjdk.org/jeps/459 (Second Preview)
https://openjdk.org/jeps/465 (Third Preview)
https://mail.openjdk.org/pipermail/amber-spec-experts/2024-April/004106.htmlcloses: vim/vim#155798556e23ee9
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Installing treesitter parser is hard (harder than
climbing to heaven).
Solution: Add optional support for wasm parsers with `wasmtime`.
Notes:
* Needs to be enabled by setting `ENABLE_WASMTIME` for tree-sitter and
Neovim. Build with
`make CMAKE_EXTRA_FLAGS=-DENABLE_WASMTIME=ON
DEPS_CMAKE_FLAGS=-DENABLE_WASMTIME=ON`
* Adds optional Rust (obviously) and C11 dependencies.
* Wasmtime comes with a lot of features that can negatively affect
Neovim performance due to library and symbol table size. Make sure to
build with minimal features and full LTO.
* To reduce re-compilation times, install `sccache` and build with
`RUSTC_WRAPPER=<path/to/sccache> make ...`
Problem: cannot set special highlight kind in popupmenu
Solution: add kind_hlgroup item to complete function
(glepnir)
closes: vim/vim#1556138f99a1f0d
Co-authored-by: glepnir <glephunter@gmail.com>
- Obtain and pass through translated messages with this
function.
- If "g:java_foldtext_show_first_or_second_line" is defined,
assign this function to &foldtext.
closes: vim/vim#155492750b83fa1
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Some items of completion results include function signatures that can
cause the pum to be very long when a function has many params, because pum
scales with the longest word/abbr.
Solution: add custom covert function that can customise abbr to remove params.
- It's clear that :s and :& are Ex commands, so remove "command" along
with the duplicate "the".
- Use "or" instead of "and" following "without".
closes: vim/vim#15527e44e64492c
Problem: :keeppatterns does not retain the substitute pattern
for a :s command
Solution: preserve the last substitute pattern when used with the
:keeppatterns command modifier (Gregory Anders)
closes: vim/vim#154973b59be4ed8
Co-authored-by: Gregory Anders <greg@gpanders.com>
I added help tags for them in the syntax.txt file since this is the only
place they are mentioned.
closes: vim/vim#15486dc831db6ea
Co-authored-by: JJCUBER <34446698+JJCUBER@users.noreply.github.com>
Problem: Contents of terminal buffer are not reflown when Nvim is
resized.
Solution: Enable reflow in libvterm by default. Now that libvterm is
vendored, also fix "TUI rapid resize" test failures there.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
Problem: Adding support for modern Nvim features (reflow, OSC 8, full
utf8/emoji support) requires coupling libvterm to Nvim internals
(e.g., utf8proc).
Solution: Vendor libvterm at v0.3.3.
According to :h win32-PATH, "the same directory as Vim" means the same
directory as the Vim executable, not Vim's current directory. In patch
8.2.4860 these two concepts were mixed up.
closes: vim/vim#154510cc5dce578
* do not capitalize after a double colon when introducing a list
* Capitalize a header line
closes: vim/vim#15433217d3c17c6
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Calling a function from an "expr" option has too much overhead.
Solution: Add call_simple_func() and use it for 'foldexpr'
87b4e5c5db
Cherry-pick a call_func() change from patch 8.2.1343.
Add expr-option-function docs to options.txt.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: using a script-local function requires using "s:" when
setting 'completefunc'.
Solution: Do not require "s:" in Vim9 script. (closesvim/vim#9796)
1fca5f3e86
vim-patch:8.2.4417: using NULL pointer
Problem: Using NULL pointer.
Solution: Set offset after checking for NULL pointer.
e89bfd212b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
- Reword a few sentences and reformat a few paragraphs.
- Supply absent capitalisation and punctuation.
- Make listed highlighting groups and code stand out.
- Prefix all Java-related global variables with "g:".
- Add spaces around each variable assignment operator.
- Acknowledge that some Javadoc variables are maintained in
the HTML syntax file.
Also, move the overridable _default_ HTML group links before
the HTML syntax file inclusion in order to implement the
documented diverged settings.
related: vim/vim#153993749dff093
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem: regex: wrong match when searching multi-byte char
case-insensitive (diffsetter)
Solution: Apply proper case-folding for characters and search-string
This patch does the following 4 things:
1) When the regexp engine compares two utf-8 codepoints case
insensitive it may match an adjacent character, because it assumes
it can step over as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some
single-byte value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte value
's' by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
* we try to match the correct length for the pattern and the text
* in case of a match, we step over it correctly
There is one tricky thing for the backtracing engine. We also need to
calculate correctly the number of bytes to compare the 2 different
utf-8 strings s1 and s2. So we will count the number of characters in
s1 that the byte len specified. Then we count the number of bytes to
step over the same number of characters in string s2 and then we can
correctly compare the 2 utf-8 strings.
2) A similar thing can happen for the NFA engine, when skipping to the
next character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over.
So this needs to be adjusted in find_match_text() as well.
3) A related issue turned out, when prog->match_text is actually empty.
In that case we should try to find the next match and skip this
condition.
4) When comparing characters using collections, we must also apply case
folding to each character in the collection and not just to the
current character from the search string. This doesn't apply to the
NFA engine, because internally it converts collections to branches
[abc] -> a\|b\|c
fixes: vim/vim#14294closes: vim/vim#1475622e8e12d9f
N/A patches:
vim-patch:9.0.1771: regex: combining chars in collections not handled
vim-patch:9.0.1777: patch 9.0.1771 causes problems
Co-authored-by: Christian Brabandt <cb@256bit.org>
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem: Rename of pum hl_group is incomplete in source.
Solution: Also rename the test function. Rename to user_hlattr in code
to avoid confusion with pum_extra. Add test with matched text
highlighting (zeertzjq).
closes: vim/vim#153484100852e09
Problem: cannot mark deprecated attributes in completion menu
Solution: add hl_group to the Dictionary of supported completion fields
(glepnir)
closes: vim/vim#15314508e7856ec
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: Make syntax highlighting off for MS Makefiles
Solution: Try to detect MS Makefiles and adjust syntax rules to it.
(Ken Takata)
Highlighting of variable expansion in Microsoft Makefile can be broken.
E.g.:
2979cfc262/src/Make_mvc.mak (L1331)
Don't use backslash as escape characters if `make_microsoft` is set.
Also fix that `make_no_comments` was not considered if `make_microsoft`
was set.
Also add description for `make_microsoft` and `make_no_comments` to the
documentation and include a very simple filetype test
closes: vim/vim#15341eb4b903c9b
Co-authored-by: Ken Takata <kentkt@csc.jp>
This token will be highlighted, similar to the arrow of
lambda expressions, whenever "g:java_highlight_functions" is
defined.
Also:
- Improve the recognition of _switch-case_ labels
(D-Cysteine).
- Remove insignificant empty statements in syntax test
files.
closes: vim/vim#15322
References:
https://docs.oracle.com/javase/specs/jls/se21/html/jls-15.html#jls-15.13https://github.com/fleiner/vim/pull/1e73e5b889b
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Co-authored-by: D-Cysteine <54219287+D-Cysteine@users.noreply.github.com>
Problem: Plugin authors and distribution packagers are confused about
the role of LuaJIT vs. PUC Lua.
Solution: Clarify that LuaJIT is preferred but not required (extensions
should not be assumed but checked for) and that vanilla Lua 5.1 should
be used without language extensions such as `goto`.
Problem: calling `vim.filetype.match()` has performance bottleneck in
that it has to match a lot of Lua patterns against several versions of
input file name. This might be the problem if users need to call it
synchronously a lot of times.
Solution: add "parent pattern pre-matching" which can be used to quickly
reject several potential pattern matches at (usually rare) cost of
adding time for one extra Lua pattern match.
"Parent pattern" is a manually added/tracked grouping of filetype
patterns which should have two properties:
- Match at least the same set of strings as its filetype patterns.
But not too much more.
- Be fast to match.
For them to be effective, group should consist from at least three
filetype patterns.
Example: for a filetpye pattern ".*/etc/a2ps/.*%.cfg", both "/etc/"
and "%.cfg" are good parent patterns (prefer the one which can group
more filetype patterns).
After this commit, `vim.filetype.match()` on most inputs runs ~3.4
times faster (while some inputs may see less impact if they match
many parent patterns).
Problem: filetype: Mediawiki files are not recognized
Solution: detect "*.mw" and "*.wiki" as mediawiki filetype,
include basic syntax and filetype plugins.
(AvidSeeker)
closes: vim/vim#15266b5844104ab
Co-authored-by: AvidSeeker <avidseeker7@protonmail.com>
Problem:
Empty dictionaries are converted into typed tables of the form `{ [true]
= 6}` instead of an empty dictionary representation `{}`. This leads to
incorrect table representation, along with failure in JSON encoding of
such tables as currently tables with only string and number type keys
can be encoded.
Solution:
The typed table logic has been removed from `nlua_push_Dictionary`. The
typed table logic is required only for float value conversions which is
already handled in `nlua_push_Float`. So, it is(was) no longer required
here.
Fixesneovim/neovim#29218
related: vim/vim#15120closes: vim/vim#1522874703f1086
Nvim only supports Vim Ex mode, so this is long obsolete in Nvim.
Co-authored-by: Mohamed Akram <mohd.akram@outlook.com>
Problem: moving in the buffer list doesn't work as documented
(SenileFelineS)
Solution: Skip non-help buffers, when run from normal buffers, else
only move from help buffers to the next help buffer (LemonBoy)
As explained in the help section for :bnext and :bprev the commands
should jump from help buffers to help buffers (and from regular ones to
regular ones).
fixes: vim/vim#4478closes: vim/vim#15198893eeeb445
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: :bw leaves jumplist and tagstack data around
(Paul "Joey" Clark)
Solution: Wipe jumplist and tagstack references to the wiped buffer
(LemonBoy)
As documented the :bwipeout command brutally deletes all the references
to the buffer, so let's make it delete all the entries in the jump list
and tag stack referring to the wiped-out buffer.
fixes: vim/vim#8201closes: vim/vim#151854ff3a9b1e3
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: No way to get the arity of a Vim function
(Austin Ziegler)
Solution: Enhance get() Vim script function to return the function
argument info using get(func, "arity") (LemonBoy)
fixes: vim/vim#15097closes: vim/vim#1510948b7d05a4f
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Neovim bundles treesitter parsers for bash and python but does
not use them by default. This dilutes the messaging about the bundled
parsers being required for functionality or reasonable out-of-the-box
experience. It also increases the risk of query incompatibilities for no
gain.
Solution: Stop bundling bash and python parser and queries.
Problem: Behavior of CursorMovedC is strange.
Solution: Also trigger when the cmdline has changed.
(zeertzjq)
fixes: vim/vim#15069closes: vim/vim#150718145620a95
Problem: Unused assignment in sign_define_cmd()
Solution: Remove the assignment. Also document the "priority" flag of
sign_define(). (zeertzjq)
closes: vim/vim#15169fc3f5dba52
Also add the newly documented keys from commit 6a4afb1efca1bac5fbc0281804591cf0a52b2d81
to index.txt which was forgotten.
related: vim/vim#15107fbbabbca33
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to assign priority when defining a sign
(Mathias Fußenegger)
Solution: Add the priority argument for the :sign-define ex command and
the sign_define() function (LemonBoy)
Use the specified value instead of the default one (SIGN_DEF_PRIO) when
no priority is explicitly specified in sign_place or :sign place.
fixes: vim/vim#8334closes: vim/vim#15124b975ddfdf9
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: signed number detection for CTRL-X/A can be improved
(Chris Patuzzo)
Solution: Add the new "blank" value for the 'nrformat' setting. This
will make Vim assume a signed number only if there is a blank
in front of the sign.
(distobs)
fixes: vim/vim#15033closes: vim/vim#1511025ac6d67d9
Co-authored-by: distobs <cuppotatocake@gmail.com>
This patch replaces fswatch with inotifywait from inotify-toools:
https://github.com/inotify-tools/inotify-tools
fswatch takes ~1min to set up recursively for the Samba source code
directory. inotifywait needs less than a second to do the same thing.
https://github.com/emcrisostomo/fswatch/issues/321
Also it fswatch seems to be unmaintained in the meantime.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Auto-completion and auto-formatting are common (though certainly not
universal) features that many users want. We can document how to
accomplish this in lsp-quickstart so that users that do want these
features can easily find examples of how to configure them.
Problem: the code and docs for vim.diagnostic.JumpOpts.float send mixed
signals about what the default should be. When the option is first set,
in the global_diagnostic_options table, the comment clearly says that
the default is false. Later in the code, in goto_diagnostic, there's
a line that sets the default to true if no default is present. Finally,
the docs say that the default is true.
Solution: Change the docs to reflect the new default of false and fix
the goto_diagnostic function.
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
With the variables defined, distinctly highlight parts of
a method declaration header: its name and parameter list
parens, from its type parameters, return type, and formal
parameters; and distinctly highlight parts of a lambda
expression: its parameter list parens and the arrow, from
its formal parameters and identifiers.
closes: vim/vim#1508301a4fb104d
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
In the presence of parameterised types whose names begin
with a capital letter and end with a less-than sign "<" that
introduces a type argument or a list of comma-separated type
arguments, followed by a greater-than sign ">", a variable
"g:java_highlight_generics" can be defined to have some
components of such types uniformly coloured (by picking
highlight groups for javaGenericsC{1,2}, javaWildcardBound).
For example,
------------------------------------------------------------
java.io.InputStream stream = java.io.InputStream.nullInputStream();
java.util.function.Function<String,
java.util.function.BiFunction<String, String, String>> updater =
property -> (oldValue, newValue) -> oldValue;
java.util.logging.LogManager.getLogManager()
.updateConfiguration(stream, updater);
------------------------------------------------------------
Note that the diamond form and explicit type arguments do
not qualify for this kind of recognition.
For example,
------------------------------------------------------------
new java.util.HashSet<>().<String>toArray(new String[0]);
------------------------------------------------------------
References:
https://docs.oracle.com/javase/specs/jls/se21/html/jls-4.html#jls-4.5https://docs.oracle.com/javase/specs/jls/se21/html/jls-15.html#jls-15.9https://docs.oracle.com/javase/specs/jls/se21/html/jls-15.html#jls-15.12.2.1closes: vim/vim#15050beb02ed674
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: hard to detect cursor movement in the command line
Solution: Add the CursorMovedC autocommand
(Shougo Matsushita)
closes: vim/vim#15040d09521476f
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Suggest adding them to news.txt instead.
Also don't ignore changes to intro.txt and sponsor.txt, as they don't
change much these days, and it's necessary to consider whether to
include their changes in Nvim's intro.txt.
Problem: termdebug can be further improved
Solution: refactor save/restore, update docs,
add a new save/restore test (Ubaldo Tiberi)
closes: vim/vim#15032a48637c105
Co-authored-by: Ubaldo Tiberi <ubaldo.tiberi@google.com>
Problem: Current instance of last search pattern not easily spotted.
Solution: Add CurSearch highlighting. (closesvim/vim#10133)
a43993897a
Some code is superseded by later patches that are already ported.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Matched text isn't highlighted in cmdline pum.
Solution: Use cmdline completion pattern in cmdline mode.
(zeertzjq)
closes: vim/vim#15029d8c9340fc6
Cherry-pick syntax.txt change from runtime update.
The value of g:javac_makeprg_params, if set, is added to the value of
'makeprg' as an option string.
closes: vim/vim#149990ddab582fa
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: A custom 'statuscolumn' needs to check a bunch of options and
placed signs to replicate the default number column.
Solution: Rework %l item to include the necessary logic to mimic the
default number column. Remove now redundant %r item.
Co-authored-by: Ilia Choly <ilia.choly@gmail.com>
Co-authored-by: Jose Pedro Oliveira <jose.p.oliveira.oss@gmail.com>
Co-authored-by: Maria José Solano <majosolano99@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: fuzzy_match_str_with_pos() does unnecessary list operations.
Solution: Use fuzzy_match() directly (zeertzjq).
closes: vim/vim#149872f95ca9fce
N/A patch:
vim-patch:9.1.0478: potential deref of NULL pointer in fuzzy_match_str_with_pos
Problem: Cannot see matched text in popup menu
Solution: Introduce 2 new highlighting groups: PmenuMatch and
PmenuMatchSel (glepnir)
closes: vim/vim#1469440c1c3317d
Co-authored-by: glepnir <glephunter@gmail.com>
These highlight groups are used for the statusline in :terminal windows.
By default they link to StatusLine and StatusLineNC (respectively), so
there is no visual difference unless a colorscheme defines these groups
separately.
Problem: the previous documentation falsely states that "v" always
refers to the start of a visual area. In fact, the reference of "v" and
"." complement each other. If the cursor is at the start of
a (characterwise) visual area, then "v" refers to the end of the area.
Solution: be more verbose and explicit about the connection between "."
and "v" and also refer to |v_o| which many vim users will be familiar
with for visual areas.
210b39c2d6
Co-authored-by: Peter Aronoff <peter@aronoff.org>
Allow highlighting of strings within comments to be disabled by setting
g:vimsyn_comment_strings to false.
959c3c887b
Co-authored-by: dkearns <dougkearns@gmail.com>
When libvterm receives the OSC 52 escape sequence it ignores it because
Nvim does not set any selection callbacks. Install selection callbacks
that forward to the clipboard provider, so that setting the clipboard
with OSC 52 in the embedded terminal writes to the system clipboard
using the configured clipboard provider.
* Revert "fix(lsp): account for changedtick version gap on modified reset (#29170)"
This reverts commit 2e6d295f79.
* Revert "refactor(lsp): replace util.buf_versions with changedtick (#28943)"
This reverts commit 5c33815448.
Allow whitespace between the :substitute command and its pattern
argument. Although unusual, it is supported and there are examples in
the wild.
Match Vi compatible :substitute commands like :s\/{string}/. See :help
E1270.
fixes: vim/vim#14920closes: vim/vim#1492392f4e91590
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Cannot have buffer-local value for 'completeopt'
(Nick Jensen).
Solution: Make 'completeopt' global-local (zeertzjq).
Also for some reason test Test_ColonEight_MultiByte seems to be failing
sporadically now. Let's mark it as flaky.
fixes: vim/vim#5487closes: vim/vim#14922529b9ad62a
Problem: no fuzzy-matching support for insert-completion
Solution: enable insert-mode completion with fuzzy-matching
using :set completopt+=fuzzy (glepnir).
closes: vim/vim#14878a218cc6cda
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: no whitespace padding in commentstring option in ftplugins
Solution: Change default to include whitespace padding, update
existing filetype plugins with the new default value
(Riley Bruins)
closes: vim/vim#148430a0830624a
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
