Farewell to Bram and dedicate upcoming Vim 9.1 to him (vim/vim#12749)
e978b4534a
Also update the header for the following files that were converted to Vim9
script upstream:
- autoload/ccomplete.lua (vim9jitted)
- ftplugin.vim
- ftplugof.vim
- indent.vim
- indent/vim.vim
- makemenu.vim
This also updates the "Last Change" dates, even if some changes (due to rewrites
to Vim9 script) were not ported.
There's still a few other places where Bram is still mentioned as a maintainer
in the files we and Vim have:
- ftplugin/bash.vim
- indent/bash.vim
- indent/html.vim
- indent/mail.vim
- macros/accents.vim
- macros/editexisting.vim
- syntax/bash.vim
- syntax/shared/typescriptcommon.vim
- syntax/tar.vim
- syntax/typescript.vim
- syntax/typescriptreact.vim
- syntax/zimbu.vim
Maybe future patches will address that.
Also exclude changes to .po files that didn't apply automatically (the
`:messages` maintainer string isn't used in Nvim anyway).
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: incsearch test not sufficient (after 9.0.1691)
Solution: add an additional test
73b8209266
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem:
Treesitter highlighting is slow for large files with lots of injections.
Solution:
Only parse injections we are going to render during a redraw cycle.
---
- `LanguageTree:parse()` will no longer parse injections by default and
now requires an explicit range argument to be passed.
- `TSHighlighter` now parses injections incrementally during on_win
callbacks for the line range being rendered.
- Plugins which require certain injections to be parsed must run
`parser:parse({ start_row, end_row })` before using the tree.
Problem: Temporarily changing current window in a script causes
CursorMoved to be triggerd.
Solution: Don't trigger CursorMoved if neither curwin nor cursor
changed between two checks.
Problem: cannot store custom data in quickfix list
Solution: add `user_data` field for the quickfix list
closes: vim/vim#11818ca6ac99077
Co-authored-by: Tom Praschan <13141438+tom-anders@users.noreply.github.com>
Problem: Ctrl-Q not handled like Ctrl-V in replace mode
Solution: Handle Ctrl-Q like Ctrl-V
closes: vim/vim#12686closes: vim/vim#126842d63e4b3cc
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: mapset() not properly handling script ID
Solution: replace_termcodes() may accept a script ID
closes: vim/vim#12699closes: vim/vim#126977e0bae024d
Problem: undotree() only works for the current buffer
Solution: Add an optional "buffer number" parameter to undotree(). If
omitted, use the current buffer for backwards compatibility.
closes: vim/vim#4001closes: vim/vim#122925fee111149
Co-authored-by: Devin J. Pohly <djpohly@gmail.com>
* feat(treesitter): add injection language fallback
Problem: injection languages are often specified via aliases (e.g.,
filetype or in upper case), requiring custom directives.
Solution: include lookup logic (try as parser name, then filetype, then
lowercase) in LanguageTree itself and remove `#inject-language`
directive.
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem:
With tsserver LSP, omni completion after "." inserts an extra "."
Solution:
Apply adjust_start_col() regardless of `filterText`.
adjust_start_col() is explained here:
0ea8dfeb3d/runtime/lua/vim/lsp.lua (L2334-L2351)
The `filterText` field is used in the following situations rather than as
a condition for obtaining column values:
1. Real-time filtering: When the user types characters in the editor, the
language server can use the filterText field to filter the list of
suggestions and only return suggestions that match the typed characters. This
helps to provide more precise recommendations.
2. Fuzzy matching: The filterText field can be used to perform fuzzy matching,
allowing matching in the middle or beginning of input characters, not limited
to prefix matching. This can provide a more flexible code completion
experience.
Inspecting usage of `filtertext` in vim-lsp and coc and lsp-mode:
- vim-lsp uses a `refresh_pattern` to judge filterText as completionitem word
(although I think this is not the correct usage).
- coc uses it for filtering.
Fix#22803
The terminal buffer closes automatically when using `:terminal` and the
command exits without an error. This messes up some tests that expect
the terminal buffer to still be open. We can force the buffer not to
close by passing an argument to `:terminal`. This can be anything, since
the shell-test stub simply prints whatever argument it's given.
When starting a terminal buffer that uses the default value of &shell
(e.g. when using `:terminal` or `termopen([&shell])`), automatically
close the buffer if the shell exits without an error.
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: vim/vim#12612closes: vim/vim#12729closes: vim/vim#12702closes: vim/vim#12688closes: vim/vim#12668closes: vim/vim#12631closes: vim/vim#12573
Already ported but wasn't marked: vim-patch:ad34abee2583
6efb198033
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
Update the vimscript code for restoring cursor position
Using xxd(1) to filter and edit binary files causes the input files
to have dual nature, so to speak, which effectively makes restoring
the cursor position broken. Fix that by ignoring the "xxd" file type
in the code that restores the cursor position.
Interactive rebasing in git causes files to be edited in vim, which,
similarly to commit messages, are rarely the same as the last one
edited. Thus, also add "gitrebase" to the list of file types for
which the cursor position isn't restored.
While there, refactor the code a bit to possibly save a few CPU cycles
and to keep the line lengths in check, and use the long form of the
commands and variables, to make the code slightly more consistent and
more understandable to newcomers.
Update the relevant comments in the code and the associated parts of
the documentation, to keep them in sync with the updated code.
Remove some redundant trailing whitespace as well, as spotted.
81b8bf5b4a
Co-authored-by: Dragan Simic' via vim_dev <vim_dev@googlegroups.com>
Improve the vimscript code in ":h hex-editing"
Save and restore the view position before and after saving the buffer,
respectively, to keep the current view of the xxd(1)'s hex dump
unchanged after doing ":w", which previously caused the window to
scroll back to the very beginning of the buffer. I believe it's
needless to say how annoying and counterproductive that was.
Get rid of the "Press ENTER or type command to continue" message, which
was previously displayed after opening larger binary files. The use
of "silent" and "redraw" commands is tailored specifically to avoid
screen flickering, e.g. when doing ":w", which is caused by the buffer
being filtered by an external command.
Increase the number of octets per line, produced by xxd(1), from the
default value of 16 to 32. This puts bigger chunks of the hex dump
on the screen and makes the whole thing much more usable.
While there, reformat the code to make it more readable, and use the
long form of the commands and variables to make the code slightly more
consistent and more understandable to newcomers.
6a500661a9
Co-authored-by: Dragan Simic' via vim_dev <vim_dev@googlegroups.com>
Problem:
Nvim docs use "•" as a list item prefix but `gw{motion}` doesn't format
such lists by default.
Solution:
Change the 'comments' option to include "fb:•" by default.
If an iterator pipeline stage returns nil as its first return value, the
other return values are ignored and it is treated as if that stage
returned only nil (the semantics of returning nil are different between
different stages). This is consistent with how for loops work in Lua
more generally, where the for loop breaks when the first return value
from the function iterator is nil (see :h for-in for details).
Add filetype detection for eyaml files (vim/vim#12659)
https://github.com/voxpupuli/hiera-eyaml/ uses and produces the eyaml
format, which is simply yaml with some encrypted values.
It's convenient to edit the file without decrypting when not touching
encrypted values (or when you don't have access to the decryption key),
which is why vim should treat those files as yaml files.
b69b9d5e17
Co-authored-by: Max Gautier <mg@max.gautier.name>
feat(heex): borrow matchit support from html (vim/vim#12717)
* feat(heex): borrow matchit support from html
Makes % support behave the same in heex as in html. For example, quickly moving the cursor between opening and closing tags.
* Remove unnecessary line; define b:undo_ftplugin first
* Remove b:html_set_match_words
8967f6c4b9
Co-authored-by: Chris Vincent <chris.vincent@hey.com>
* vim-patch:44ff25d5243b
PyPA manifest files are not recognized (vim/vim#12707)
Problem: PyPA manifest files are not recognized.
Solution: Add a pattern to match PyPA manifest files.
44ff25d524
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>