Diagnostic signs should now be configured with vim.diagnostic.config(),
but "legacy" sign definitions should go through the standard deprecation
process to minimize the impact from breaking changes.
Problem:
- The :Evaluate result window is not cleaned up when the cursor moves.
- This window is not focusable.
Solution:
Replace the old implementation from autozimu/LanguageClient-neovim with
vim.lsp.util.open_floating_preview and implement custom focusing logic.
Also remove g:termdebug_useFloatingHover option now that it's working
correctly.
runtime(fortan): update fortran syntax rules and doc notes
Update to the Fortran 2023 standard. Reorganize some code to reflect the
dropping of dialect support in the previous commit. Minor improvements.
closes: vim/vim#1371271cbe8e17a
Co-authored-by: Ajit-Thakkar <142174202+Ajit-Thakkar@users.noreply.github.com>
Problem:
Treesitter highlighter's on_line was iterating all the parsed trees,
which can be quite a lot when injection is used. This may slow down
scrolling and cursor movement in big files with many comment injections
(e.g., lsp/_meta/protocol.lua).
Solution:
In on_win, collect trees inside the visible range, and use them in
on_line.
NOTE:
This optimization depends on the correctness of on_win's botline_guess
parameter (i.e., it's always greater than or equal to the line numbers
passed to on_line). The documentation does not guarantee this, but I
have never noticed a problem so far.
- add EXTERNALPROJECT_OPTIONS variable to main build
- use `REQUIRED` keyword for IWYU.
- remove check_c_compiler_flag checks when `ENABLE_COMPILER_SUGGESTIONS`
is `ON`. If we explicitly enable it then we probably want it to give
an error if it doesn't exist, rather than silently skip it.
- Move dependency interface libraries to their find module and use them
as a pseudo-imported target.
- Remove BUSTED_OUTPUT_TYPE. It's not used and we can reintroduce it
again if something similar is needed.
- Use LINK_OPTIONS intead of LINK_FLAGS when generating the `--version`
output.
Currently, setting &bg at all re-initializes highlights and reloads
the active colorscheme, even if the actual value of &bg has not changed.
With https://github.com/neovim/neovim/pull/26595 this causes a
regression since &bg is set unconditionally based on the value detected
from the terminal.
Instead, only reload the colorscheme if the actual value of &bg has
changed.
The benefits are primarily being able to use FetchContent, which allows
for a more flexible dependency handling. Other various quality-of-life
features such as `-B` and `-S` flags are also included.
This also removes broken `--version` generation as it does not work for
version 3.10 and 3.11 due to the `JOIN` generator expression.
Reference: https://github.com/neovim/neovim/issues/24004
runtime(doc): remove deprecation warning for gdefault
Deprecated can be misunderstood as being slated for removal; slightly
change wording to be clearer.
82f19734bf
Co-authored-by: dundargoc <gocdundar@gmail.com>
runtime(logtalk): Update Logtalk runtime files for the latest language spec (vim/vim#13697)
0f61943eb7
Co-authored-by: Paulo Moura <pmoura@logtalk.org>
runtime(racket): update Racket runtime files (vim/vim#13693)
This brings the included Racket runtime files to commit 43bfc87 (update
headers, 2023-12-15) of https://github.com/benknoble/vim-racket. Note
that not all files from that repository are included. (In particular,
the ftdetect script is omitted for now.)
5eb9cb53d6
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
runtime(colorschemes): Update colorschemes (vim/vim#13691)
Minor changes:
- Regenerated using colortemplate 2.2.3
- Removed reversed gui-cursor for some of the colorschemes (retrobox, wildcharm, lunaperche)
- Change MatchParen for some of colorschemes.
0378f07fba
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: Updating default color scheme produced some feedback.
Solution: Address the feedback.
Outline of the changes:
- Colors `Grey1` and `Grey2` are made a little bit more extreme (dark -
darker, light - lighter) to increase overall contrast.
- `gui` colors are treated as base with `cterm` colors falling back to
using 0-15 colors which come from terminal emulator.
- Update highlight group definition to not include attribute definition
if it is intended to staty uncolored.
- Tweak some specific highlight groups.
- Add a list of Neovim specific highlight groups which are now defined
differently in a breaking way.
- Minor tweaks in several other places related to default color scheme.
Comparing against the old value before setting matched the original
C implementation, but there is no reason to use this restriction. In
particular, this inhibits using OptionSet to determine when the option
was set. If users need to handle a case where the option _changed_, it
is easy to do so in an OptionSet autocommand using v:option_new and
v:option_old (and friends).
runtime(vim): Update syntax file, fix missing for highlight (vim/vim#13668)
Fix highlighting of :for command. Link the vimFor syntax group to the
vimCommand highlight group.
Error introduced in commit f686921
1c97b5c0c0
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(sbt): do not set b:did_ftplugin before sourcing scala ftplugin(vim/vim#13657)
The `b:did_ftplugin` guard was set and prevented us from actually sourcing `ftplugin/scala.vim`. Since the latter script also sets the guard properly, we can simply remove the guard here.
5a68cdf149
Co-authored-by: Karl Yngve Lervåg <karl.yngve@lervag.net>
runtime(vim): Update syntax file (vim/vim#13653)
Improve variable highlighting in :let, :unlet, :const and :for commands.
Match registers and local, global and terminal option variables.
f6869212c9
Co-authored-by: dkearns <dougkearns@gmail.com>
Anonymous namespaces are more difficult to extend or hook into since
they do not appear in the output of nvim_get_namespaces(). Use named
namespaces instead.
Problem: We have `P_(BOOL|NUM|STRING)` macros to represent an option's type, which is redundant because `OptValType` can already do that. The current implementation of option type flags is also too limited to allow adding multitype options in the future.
Solution: Remove `P_(BOOL|NUM|STRING)` and replace it with a new `type_flags` attribute in `vimoption_T`. Also do some groundwork for adding multitype options in the future.
Side-effects: Attempting to set an invalid keycode option (e.g. `set t_foo=123`) no longer gives an error.
Problem:
Unlike termopen(), nvim_open_term() PTYs do not carriage-return the
cursor on newline ("\n") input.
nvim --clean
:let chan_id = nvim_open_term(1, {})
:call chansend(chan_id, ["here", "are", "some", "lines"])
Actual behavior:
here
are
some
lines
Expected behaviour:
here
are
some
lines
Solution:
Add `force_crlf` option, and enable it by default.
Problem: Wiki contents are not discoverable and hard to maintain.
Solution: Move FAQ to runtime docs.
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
If multiple XTGETTCAP requests are active at once (for example, for
requesting the Ms capability and truecolor capabilities), then the
TermResponse autocommand may fire for capabilities that were not
requested. Instead, make sure that the provided callback is only called
for capabilities that were actually requested.
* Collect on_bytes and flush at the invocation of the scheduled callback
to take account of commands that triggers multiple on_bytes.
* More accurately track movement of folds so that foldexpr returns
reasonable values even when the scheduled computation is not run yet.
* Start computing folds from the line above (+ foldminlines) the changed
lines to handle the folds that are removed due to the size limit.
* Shrink folds that end at the line at which another fold starts to
assign proper level to that line.
* Use level '=' for lines that are not computed yet.
- Improve CLI argument parsing, rejects invalid argument and commands as
early as possible. Also prints USAGE in the command line.
- No longer allows `--<outfile>`, use `--out <outfile>` instead.
- Print a little bit of verbose messages to better know what's going on
rather than remaining silent at all times.
- Add type annotation `gen_lsp._opt` to avoid type warnings.
* fix garbled item for new treesitter injection format
* add missing item for new `vim.lpeg` and `vim.re`
* use taglinks where possible
* remove redundant "Added" and "Removed" from items
runtime(doc): link cmdline completion to to |wildcards| and fix typos (vim/vim#13636)
The docs for cmdline completion doesn't mention that [abc] is considered
a wildcard, and |wildcards| contains more detailed information, so just
link to it.
Also fix some typos in other help files.
61e984e212
runtime(syntax): unlet b:filetype_in_cpp_family for cpp & squirrel
Update runtime/syntax/cpp.vim and runtime/syntax/squirrel.vim to unlet
b:filetype_in_cpp_family as it remains set even after updating the ft of
a file manually or through a modeline, not allowing c specific keywords
to be highlighted.
Since the variable b:filetype_in_cpp_family is only used by the c.vim
syntax script, unlet it directly after sourcing the c.vim runtime file
instead of at the end of the script.
Also update the last Change Header for both files.
closes: vim/vim#13650ff0baca865
Co-authored-by: laburnumT <laburnumtec@gmail.com>
Enable 'termguicolors' automatically when Nvim can detect that truecolor
is supported by the host terminal.
If $COLORTERM is set to "truecolor" or "24bit", or the terminal's
terminfo entry contains capabilities for Tc, RGB, or setrgbf and
setrgbb, then we assume that the terminal supports truecolor. Otherwise,
the terminal is queried (using both XTGETTCAP and SGR + DECRQSS). If the
terminal's response to these queries (if any) indicates that it supports
truecolor, then 'termguicolors' is enabled.
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
runtime(doc): remove non-existent parameter in shift-command (vim/vim#13626)
The variant with the {count} parameter is explained in the next item.
2103a56eab
N/A patches:
vim-patch:9.0.2150: Using int for errbuflen in option funcs
vim-patch:3f7855a6123c
Co-authored-by: Roy Orbitson <Roy-Orbison@users.noreply.github.com>
Problem: Vim does not detect pacman.log file
Solution: Detect pacmanlogs and add syntax highlighting
pacman.log is a filetype common to Arch Liux and related distributions.
Add some simple syntax highlighting for the pacmanlog filetype.
closes: vim/vim#136181e5d66408e
Co-authored-by: Ronan Pigott <ronan@rjp.ie>
PROBLEM: `vim.treesitter.get_node()` does not recognize the `lang` in
the option table. This option was used in somewhere else, for instance,
`vim.treesitter.dev` (for `inspect_tree`) but was never implemented.
SOLUTION: Make `get_node()` correctly use `opts.lang` when getting a
treesitter parser.
Problem: Default color scheme is suboptimal.
Solution: Start using new color scheme. Introduce new `vim` color scheme
for opt-in backward compatibility.
------
Main design ideas
- Be "Neovim branded".
- Be minimal for 256 colors with a bit more shades for true colors.
- Be accessible through high enough contrast ratios.
- Be suitable for dark and light backgrounds via exchange of dark and
light palettes.
------
Palettes
- Have dark and light variants. Implemented through exporeted
`NvimDark*` and `NvimLight*` hex colors.
- Palettes have 4 shades of grey for UI elements and 6 colors (red,
yellow, green, cyan, blue, magenta).
- Actual values are computed procedurally in Oklch color space based on
a handful of hyperparameters.
- Each color has a 256 colors variant with perceptually closest color.
------
Highlight groups
Use:
- Grey shades for general UI according to their design.
- Bold text for keywords (`Statement` highlight group). This is an
important choice to increase accessibility for people with color
deficiencies, as it doesn't rely on actual color.
- Green for strings, `DiffAdd` (as background), `DiagnosticOk`, and some
minor text UI elements.
- Cyan as main syntax color, i.e. for function usage (`Function`
highlight group), `DiffText`, `DiagnosticInfo`, and some minor text UI
elements.
- Red to generally mean high user attention, i.e. errors; in particular
for `ErrorMsg`, `DiffDelete`, `DiagnosticError`.
- Yellow very sparingly only with true colors to mean mild user
attention, i.e. warnings. That is, `DiagnosticWarn` and `WarningMsg`.
- Blue very sparingly only with true colors as `DiagnosticHint` and some
additional important syntax group (like `Identifier`).
- Magenta very carefully (if at all).
------
Notes
- To make tests work without relatively larege updates, each one is
prepended with an equivalent of the call `:colorscheme vim`.
Plus some tests which spawn new Neovim instances also now use 'vim'
color scheme.
In some cases tests are updated to fit new default color scheme.
Problem: html.angular ft is problematic
Solution: partly revert v9.0.2137
The html.angular filetype causes issues and does not trigger FileType
autocommands for the html or angular filetypes.
So let's roll back that particular change and detect this only as html
file
related: https://github.com/vim/vim/pull/13594#issuecomment-1834465890closes: vim/vim#136044f3480c943
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
`LanguageTree:for_each_tree` calls itself for child nodes, so when we
calls `for_each_tree` inside `for_each_tree`, this quickly leads to
exponential tree calls.
Solution:
Use `pairs(child:trees())` directly in this case, as we don't need the
extra callback for each children, this is already handled from the outer
`for_each_tree` call
When first opened, the tree-sitter inspector traverses all of the nodes
in the buffer to calculate an array of nodes. This traversal is done
only once, and _all_ nodes (both named and anonymous) are included.
Toggling anonymous nodes in the inspector only changes how the tree is
drawn in the buffer, but does not affect the underlying data structure
at all.
When the buffer is traversed and the list of nodes is calculated, we
don't know whether or not anonymous nodes will be displayed in the
inspector or not. Thus, we cannot determine during traversal where to
put closing parentheses. Instead, this must be done when drawing.
When we draw, the tree structure has been flatted into a single array,
so we lose parent-child relationships that would otherwise make
determining the number of closing parentheses straightforward. However,
we can instead rely on the fact that a delta between the depth of a node
and the depth of the successive node _must_ mean that more closing
parentheses are required:
(foo
(bar)
(baz) ↑
│
└ (bar) and (baz) have different depths, so (bar) must have an
extra closing parenthesis
This does not depend on whether or not anonymous nodes are displayed and
so works in both cases.
FUNC_ATTR_* should only be used in .c files with generated headers.
Defining FUNC_ATTR_* as empty in headers causes misuses of them to be
silently ignored. Instead don't define them by default, and only define
them as empty after a .c file has included its generated header.
runtime(html): Update syntax file (vim/vim#13591)
Add missing search element and update ARIA attribute list.
Add a very basic test file to check all elements are matched.
a9058440b7
Co-authored-by: dkearns <dougkearns@gmail.com>
The OptionSet autocommand does not fire until Vim has finished starting,
so setting 'background' before the VimEnter event would not fire the
OptionSet event. The prior implementation also waited until VimEnter to
set 'background', so this was a regression introduced when moving
background detection into Lua.
Problem: Only injections under the top level tree are found.
Solution: Iterate through all trees to find injections. When two
injections are contained within the same node in the parent tree, prefer
the injection with the larger byte length.
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: vim/vim#13588fcaeb3d42b
tmux intercepts and ignores XTGETTCAP so wrap the query in the tmux
passthrough sequence to make sure the query arrives at the "host"
terminal.
Users must still set the 'allow-passthrough' option in their tmux.conf.
Checking if it's non-empty and not a directory gets us quite far, but
not all the way. While a working symlink would trigger the earlier
checks, a broken symlink does not.
This commit fixes the special case where ~/.local/share/nvim already
exists but is a broken symlink. Thus, it fixes the following error on
startup:
E739: Cannot create directory /home/samuel/.local/share/nvim: file
already exists
decor->text.str pointer must go. This removes it for conceal char,
in preparation for a larger PR which will also handle the sign case.
By actually allowing composing chars for a conceal chars, this
becomes a feature and not just a refactor, as a bonus.
Problem: not all nushell files detected
Solution: use *.nu to detect nushell files
closes: vim/vim#13586b9efc72c24
Co-authored-by: Daniel Buch Hansen <boogiewasthere@gmail.com>
When parsing with a range, languagetree looks up injections and adds
them if needed. This explicitly invalidates parser, making `is_valid`
report `false` both when including and excluding children.
This is an attempt to describe desired behaviour of `is_valid` in tests,
with what ended up being a single line change to satisfy them.
runtime(nginx): add additional nginx keywords (vim/vim#13581)
* Add support for missing keywords to the nginx syntax plugin
This adds support for several keywords from
- the built-in HTTP/2 module,
- the built-in SSL module,
- the built-in uWSGI module,
- the experimental QUIC branch,
- the third-party SSL CT module,
- the third-party dynamic TLS records patch.
Co-Author: ObserverOfTime <chronobserver@disroot.org>
* Add missing http2/ http3 keywords to nginx plugin
cf40409e7d
Co-authored-by: Chris Aumann <me@chr4.org>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Add syntax and filetype plugins for SWIG (Simplified Wrapper Interface
Generator) description files.
The default syntax for .i files highlights comments in a reverse
color scheme which doesn't look well. This syntax builds
on vim's c++ syntax by adding highlighting for common swig
directives and user defined directives. For an alternative
syntax, see vimscript vim/vim#1247 (which I found after writing this).
closes: vim/vim#135622e31065a65
Co-authored-by: Julien Marrec <julien.marrec@gmail.com>
Co-authored-by: Matěj Cepl <mcepl@cepl.eu>
runtime(tsx): add indentation plugin (fixesvim/vim#13574) (vim/vim#13576)
for now, let's just use the typescript indent file.
813a538bb3
Co-authored-by: Jōshin <mrdomino@gmail.com>
runtime(netrw): Fix handling of very long filename on longlist style (vim/vim#12150)
If there is a file with a very long filename (longer than
g:netrw_maxfilenamelen), and if g:netrw_liststyle is set to 1, no space
is inserted between the filename and the filesize and the file cannot be
opened because of this.
E.g.:
```
$ echo hello > 12345678901234567890123456789012 # 32 bytes: OK
$ echo hello > 123456789012345678901234567890123 # 33 bytes: not OK
$ echo hello > 1234567890123456789012345678901234 # 34 bytes: not OK
$ echo hello > こんにちは # multibyte filename
$ LC_ALL=C.UTF-8 vim . --clean --cmd "set loadplugins" --cmd "let g:netrw_liststyle=1"
```
Then, it will be shown like this:
```
" ============================================================================
" Netrw Directory Listing (netrw v171)
" /cygdrive/c/work/netrw-test
" Sorted by name
" Sort sequence: [\/]$,\<core\%(\.\d\+\)\=\>,\.h$,\.c$,\.cpp$,\~\=\*$,*,\.o$,\
" Quick Help: <F1>:help -:go up dir D:delete R:rename s:sort-by x:special
" ==============================================================================
../ 0 Mon Mar 13 19:25:16 2023
./ 0 Mon Mar 13 19:44:58 2023
12345678901234567890123456789012 6 Mon Mar 13 19:29:43 2023
12345678901234567890123456789012346 Mon Mar 13 19:32:40 2023
1234567890123456789012345678901236 Mon Mar 13 19:29:49 2023
こんにちは 6 Mon Mar 13 19:30:41 2023
```
If the length of the filename is 32 bytes, there is a space between the
filename and the filesize. However, when it is longer than 32 bytes, no
space is shown.
Also, you may find that the filesize of the multibyte named file is not
aligned.
After this patch is applied, the filelist will be shown like this:
```
" ============================================================================
" Netrw Directory Listing (netrw v171)
" /cygdrive/c/work/netrw-test
" Sorted by name
" Sort sequence: [\/]$,\<core\%(\.\d\+\)\=\>,\.h$,\.c$,\.cpp$,\~\=\*$,*,\.o$,\
" Quick Help: <F1>:help -:go up dir D:delete R:rename s:sort-by x:special
" ==============================================================================
../ 0 Mon Mar 13 20:49:22 2023
./ 0 Mon Mar 13 21:12:14 2023
1234567890123456789012345678901 10000 Mon Mar 13 20:57:55 2023
12345678901234567890123456789012 6 Mon Mar 13 19:29:43 2023
123456789012345678901234567890123 6 Mon Mar 13 19:29:49 2023
1234567890123456789012345678901234 6 Mon Mar 13 19:32:40 2023
1234567890123456789012345678901234567 10000 Mon Mar 13 21:03:23 2023
1234567890123456789012345678901234567890 10000 Mon Mar 13 21:03:36 2023
123456789012345678901234567890123456789012 10000 Mon Mar 13 21:03:59 2023
1234567890123456789012345678901234567890123 10000 Mon Mar 13 21:03:45 2023
1234567890123456789012345678901234567890123456 5 Mon Mar 13 21:08:15 2023
12345678901234567890123456789012345678901234567 10 Mon Mar 13 21:05:21 2023
こんにちは 6 Mon Mar 13 19:30:41 2023
```
Now we have 32 + 2 + 15 = 49 characters for filename and filesize.
It tries to align the filesize as much as possible.
The last line that has multibyte filename is also aligned.
Also fixed the issue that the file list is not shown correctly when
g:netrw_sort_by is set to 'size' and g:netrw_sizestyle is set to 'h' or
'H'.
8750e3cf81
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: Unable to identify legacy signs when fetching extmarks with
`nvim_buf_get_extmarks()`.
Solution: Add "sign_name" to the extmark detail array.
Add some misc. changes as follow-up to #25724
runtime(netrw): expand $COMSPEC without applying 'wildignore' (vim/vim#13542)
When expanding $COMSPEC and a user has set :set wildignore=*.exe
netrw won't be able to properly cmd.exe, because it does not ignore the
wildignore setting.
So let's explicitly use expand() without applying the 'wildignore' and
'suffixes' settings to the result
closes: vim/vim#13426cb0c113ddc
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(doc): Fix whitespace and formatting of some help files (vim/vim#13549)
596a9f29c8
N/A patch:
vim-patch:aabca259fa48
Co-authored-by: h_east <h.east.727@gmail.com>
Should help with https://github.com/neovim/neovim/issues/23291
On linux `new_fs_event` doesn't support recursive watching, but we can
still use it to watch folders.
The downside of this approach is that we may end up sending some false
`Deleted` events. For example, if you save a file named `foo` there will
be a intermediate `foo~` due to the save mechanism of neovim.
The events we get from vim.uv in that case are:
- rename: foo~
- rename: foo~
- rename: foo
- rename: foo
- change: foo
- change: foo
The mechanism in this PR uses a debounce to reduce this to:
- deleted: foo~
- changed: foo
`foo~` will be the false positive.
I suspect that for the LSP case this is good enough. If not, we may need
to follow up on this and keep a table in memory that tracks available
files.
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Problem: [security]: overflow with count for :s command
Solution: Abort the :s command if the count is too large
If the count after the :s command is larger than what fits into a
(signed) long variable, abort with e_value_too_large.
Adds a test with INT_MAX as count and verify it correctly fails.
It seems the return value on Windows using mingw compiler wraps around,
so the initial test using :s/./b/9999999999999999999999999990 doesn't
fail there, since the count is wrapping around several times and finally
is no longer larger than 2147483647. So let's just use 2147483647 in the
test, which hopefully will always cause a failure
ac63787734
Co-authored-by: Christian Brabandt <cb@256bit.org>
Use the XTGETTCAP sequence to determine if the host terminal supports
the OSC 52 sequence and, if it does, enable the OSC 52 clipboard
provider by default.
This is only done automatically when all of the following are true:
1. Nvim is running in the TUI
2. 'clipboard' is not set to unnamed or unnamedplus
3. g:clipboard is unset
4. Nvim is running in an SSH connection ($SSH_TTY is set)
5. Nvim is not running inside tmux ($TMUX is unset)
This fixes an error that can occur in certain pathological cases when
the autocommand fires at just the right time such that it attempts to
close the timer after the timer has already exited, but before the
scheduled callback has fired.
We now let the timer continue to run even when the autocommand deletes
itself to avoid having to repeat the cleanup code multiple times. There
is no harm in letting the timer execute if the autocommand does not
exist, as the pcall will catch the error.
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: vim/vim#13533bc8f79d36a
Co-authored-by: rhysd <lin90162@yahoo.co.jp>
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem:
Platform-specific UI providers should live in `vim.ui.*`. #24164
Solution:
- Move `vim.clipboard.osc52` module to `vim.ui.clipboard.osc52`.
- TODO: move all of `clipboard.vim` to `vim.ui.clipboard`.
ref #25872
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: vim/vim#13493closes: vim/vim#135249588666360
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: recursive callback may cause issues on some archs
Solution: Decrease the limit drastically to 20
Recursive callback limit causes problems on some architectures
Since commit 47510f3d6598a1218958c03ed11337a43b73f48d we have a test
that causes a recursive popup callback function to be executed. However
it seems the current limit of 'maxfuncdepth' option value is still too
recursive for some 32bit architectures (e.g. 32bit ARM).
So instead of allowing a default limit of 100 (default value for
'maxfuncdepth'), let's reduce this limit to 20. I don't think there is a
use case where one would need such a high recursive callback limit and a
limit of 20 seems reasonable (although it is currently hard-coded).
closes: vim/vim#13495closes: vim/vim#135022076463e38
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(termdebug): improve the breakpoint sign label (vim/vim#13525)
// related vim/vim#12589
// that should be the last chat (I) with Bram, r.i.p
2dd613f57b
Co-authored-by: Shane-XB-Qian <shane.qian@foxmail.com>
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
runtime(vim): Improve :let-heredoc syntax highlighting (vim/vim#12923)
"trim" and "eval" are allowed in any order and whitespace is not
required after "=<<".
9358b8d993
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(i3config): Update for i3 4.23 (vim/vim#13522)
5994329667
Co-authored-by: Ivan Grimaldi <grimaldi.ivan@gmail.com>
Co-authored-by: Ivan Grimaldi <grimaldi.ivam@gmail.com>
