Problem: i_CTRL-R- no longer works in replace mode
Solution: delete characters in replace mode before putting, add a test,
add a bit warning into the documentation, that i_CTRL-R-P/O
is not supported in Replace mode for now
fixes: vim/vim#13792closes: vim/vim#138165d5cbb2b9a
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(netrw): Decode multibyte percent-encoding filename correctly (vim/vim#13842)
Use `printf("%c")` instead of `nr2char()` to handle '%xx' as a byte.
Closevim/vim#137872357765304
Co-authored-by: K.Takata <kentkt@csc.jp>
runtime(colorschemes): Add initial support for Added/Removed/Changed highlight groups (vim/vim#13830)
For some of the colorschemes where diffAdded and diffRemoved were explicitly set up.
5f4cc8ea65
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: default diff highlighting is too noisy
Solution: Link diff highlighting groups to new
Added/Removed/Changed, revert previous change
(Romain Lafourcade)
Remove diff* links added in vim/vim#13776 and doc added in commit b1392be
The links added in vim/vim#13776 are way too noisy for the contexts in which
the `diff` syntax is applied (git commits, patches, etc.).
This commit:
- removes those links
- adds new default highlighting groups Added, Changed and
Removed
- links the diff highlighting groups to those new defaults
- removes the doc changes
- adjusts the syntax_completion test for those newly added group
names
Note: Changes to the default color schemes will be handled separately,
by adding links to those newly created Added/Removed/Changed
highlighting groups.
related: vim/vim#13776closesvim/vim#13825124371c5a1
Co-authored-by: Romain Lafourcade <romain.lafourcade@razorfish.fr>
runtime(tar): fix a few problems with the tar plugin
From: vim/vim#138331:
- Updating .tar.zst files was broken. Fixesvim/vim#12639.
- Extracting files from .tar.zst / .tzs files was also broken and
works now.
From: vim/vim#12637:
- Fixes variable assignment and typo
From: vim/vim#8109:
- Rename .tzs to the more standard .tzst
fixes: vim/vim#12639fixes: vim/vim#8105closes: vim/vim#8109closes: vim/vim#12637closes: vim/vim#138313a5b3df776
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Martin Rys <martin@rys.pw>
Co-authored-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Co-authored-by: Carlo Teubner <carlo@cteubner.net>
This commit implements a new TermRequest autocommand event and has Neovim
emit this event when children of terminal buffers emit an OSC or DCS sequence
libvterm does not handle.
The TermRequest autocommand event has additional data in the
v:termrequest variable.
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Some lines in the generated vim doc are overflowing, not
correctly wrapped at 78 characters. This happens when docs body contains
several consecutive 'inline' elements generated by doxygen.
Solution: Take into account the current column offset of the last line,
and prepend some padding before doc_wrap().
Improve error messages for `:InspectTree`, when no parsers are available
for the current buffer and filetype. We can show more informative and
helpful error message for users (e.g., which lang was searched for):
```
... No parser available for the given buffer:
+... no parser for 'custom_ft' language, see :help treesitter-parsers
```
Also improve the relevant docs for *treesitter-parsers*.
Problem: can select empty inner text blocks
(laurentalacoque)
Solution: make selecting empty inner text blocks an error
textobjects: Make selecting inner empty blocks an error
fixes: vim/vim#13514closes: vim/vim#13523ad4d7f446d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: vim/vim#1369281642d9d6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
tmux indicates its RGB support via setrgbb and setrgbf. In modern tmux
code, Tc and RGB just set setrgbb and setrgbf, so we can just check for
them.
Link: 7eb496c00c
Problem: The maximum 'statuscolumn' width and grow behavior is undocumented.
Solution: Define, use and document the maximum 'statuscolumn' width and grow behavior.
Problem:
Many decoration providers (treesitter injection highlighting, semantic
token highlighting, inlay hint) rely on the correctness of the `botline`
argument of `on_win` callback. However, `botline` can be smaller than
the actual line number of the last displayed line if some lines are
folded. In such cases, some decorations will be missing in the lines not
covered by `botline`.
Solution:
Validate `botline` when invoking `on_win`.
NOTE:
It seems that the old code was deliberately avoiding this presumably due
to performance reasons. However, I haven't experienced noticeable lag
after this change, and I believe the cost of botline computation would
be much smaller than the cost of decoration providers.
runtime(vim): Add support for <ScriptCmd> syntax (vim/vim#10686)
Adding `<ScriptCmd>` to list of angle-bracket notation syntax, just like `<Cmd>`
`<Cmd>` is already highlighted.
```vim
nnoremap <leader>o <Cmd>Oldfiles()<CR>
```
`<ScriptCmd>` is not.
80beeef0c6
Co-authored-by: dezza <402927+dezza@users.noreply.github.com>
Problem: reloading colorscheme when not changing 'background'
Solution: Check, if the background option value actually changed,
if not, return early.
Only reload colorscheme when bg is changed
Currently the highlight groups are re-initialized and the colorscheme
(if any) is reloaded anytime 'background' is set, even if it is not
changed. This is unnecessary, because if the value was not changed then
there is no need to change highlight groups or do anything with the
colorscheme. Instead, only reload the colorscheme if the value of
'background' was actually changed.
closes: vim/vim#1370083ad2726ff
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem:
Currently `deepcopy` hashes every single tables it copies so it can be
reused. For tables of mostly unique items that are non recursive, this
hashing is unnecessarily expensive
Solution:
Port the `noref` argument from Vimscripts `deepcopy()`.
The below benchmark demonstrates the results for two extreme cases of
tables of different sizes. One table that uses the same table lots of
times and one with all unique tables.
| test | `noref=false` (ms) | `noref=true` (ms) |
| -------------------- | ------------------ | ----------------- |
| unique tables (50) | 6.59 | 2.62 |
| shared tables (50) | 3.24 | 6.40 |
| unique tables (2000) | 23381.48 | 2884.53 |
| shared tables (2000) | 3505.54 | 14038.80 |
The results are basically the inverse of each other where `noref` is
much more performance on tables with unique fields, and `not noref` is
more performant on tables that reuse fields.
Problem:
For function definitions to be included in the vimdoc (formatted) and
to be exported as mpack data (unformatted), we had two internal
representations of the same function/API metadata in duplicate;
one is FunctionDoc (which was previously a dict), and the other is
doxygen XML DOM from which vimdoc (functions sections) was generated.
Solution:
We should have a single path and unified data representation
(i.e. FunctionDoc) that contains all the metadata and information about
function APIs, from which both of mpack export and vimdoc are generated.
I.e., vimdocs are no longer generated directly from doxygen XML nodes,
but generated via:
(XML DOM Nodes) ------------> FunctionDoc ------> mpack (unformatted)
Recursive Internal |
Formatting Metadata +---> vimdoc (formatted)
This refactoring eliminates the hacky and ugly use of `fmt_vimhelp` in
`fmt_node_as_vimhelp()` and all other helper functions! This way,
`fmt_node_as_vimhelp()` can simplified as it no longer needs to handle
generating of function docs, which needs to be done only in the topmost
level of recursion.
runtime(dist/ft): improve filetype detection for *.v (V/Verilog/Coq)
Patch provided by Dan Alt
closes: vim/vim#1379310b4f75d4c
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(sh): Update sh syntax and add local keyword for bash (vim/vim#13806)
add `local` in shStatement
b16fc98055
Co-authored-by: Lucien Grondin <grondilu@yahoo.fr>
feat(diagnostic): add `vim.diagnostic.count()`
Problem: Getting diagnostic count based on the output of
`vim.diagnostic.get()` might become costly as number of diagnostic
entries grows. This is because it returns a copy of diagnostic cache
entries (so as to not allow users to change them in place).
Getting information about diagnostic count is frequently used in
statusline, so it is important to be as fast as reasonbly possible.
Solution: Add `vim.diagnostic.count()` which computes severity
counts without making copies.
- Use `#pragma once` for `cmake.config/config.h.in`
- Remove unused variable `CACHED_GENERATED_DIR`
- Reorganize and sort variables
- Introduce `STYLUA_DIRS` variable to ensure the `formatlua` and
`lintlua-stylua` operates on the same files.
- Adjust variable scope to avoid using hacky directory properties.
- Add more necessary runtime files as test dependencies
