Previously, the "precedes" character would be rendered on every row
when w_skipcol > 0 (i.e., when viewing a single line longer than the
entire screen), instead of just on the first row. Make sure to only
render it on the first row in this case.
Add a test for this behavior.
Fix documentation for the "precedes" character, which erroneously
stated that it was only active when wrap mode was off.
(Port some refactoring, but ignore "balloon" changes.)
Problem: Cannot use 'balloonexpr' in a terminal.
Solution: Add 'balloonevalterm' and add code to handle mouse movements in a
terminal. Initial implementation for Unix with GUI.
51b0f3701e
Encoding can be utf8, unicode, utf32.
User can choose to omit '-Encoding' to default to 'unicode'.
'ascii' encoding corrupts the following file:
https://www.w3.org/2001/06/utf-8-test/UTF-8-demo.html
Inspect 'foo.txt' with the following code after downloading the file.
Get-Content -Encoding UTF8 UTF-8-demo.html | Out-File -Encoding ascii foo.txt
Problem: Tabline is not always redrawn when something that is used in
'tabline' changes.
Solution: Add ":redrawtabline" so that a plugin can at least cause the
redraw when needed.
e12bab3144
Problem: Misspelled mkspellmem as makespellmem.
Solution: Drop duplicate help entry, fix test. (Naruhiko Nishino, Ken
Takata, closesvim/vim#4437)
076073950c
Problem: Using expressions in a modeline is unsafe.
Solution: Disallow using expressions in a modeline, unless the
'modelineexpr' option is set. Update help, add more tests.
110289e781
Problem: GUI window always resizes when adding/removing a scrollbar,
toolbar, etc.
Solution: Add the 'k' flag in 'guioptions' to keep the GUI window size and
change the number of lines/columns instead. (Ychin, closesvim/vim#703)
8ac441576f
Problem: Cannot see current match position.
Solution: Show "3/44" when using the "n" command and "S" is not in
'shortmess'. (Christian Brabandt, closesvim/vim#4317)
9dfa313919
On Windows we store non-config data in "$XDG_DATA_HOME/nvim-data". But
the "…/site" items in 'runtimepath' did not correctly point to that
location, they used "…/nvim/site".
Fix the init logic to use "…/nvim-data/site".
closes#9910
Nvim notes:
- Nvim does not support "-u DEFAULTS", that change is omitted.
- Also add 'shadafile' as an alias to 'viminfofile'.
- Deprecate 'viminfofile'.
Problem: Not easy to start Vim cleanly without changing the viminfo file.
Not possible to know whether the -i command line flag was used.
Solution: Add the --clean command line argument. Add the 'viminfofile'
option. Add "-u DEFAULTS".
c4da113ef9
Problem: Cannot build without the sandbox.
Solution: Set the secure option instead of using the sandbox. Also restrict
the characters from 'spelllang' that are used for LANG.vim.
(suggested by Yasuhiro Matsumoto)
82e8c92ebe
closes#990closes#9295
- Support for multiple auto-adjusted sign columns.
With this change, having more than one sign on a line, and with the
'auto' setting on 'signcolumn', extra columns will shown automatically
to accomodate all the existing signs.
For example, suppose we have this view:
5147 }
5148
5149 return sign->typenr;
5150 }
5151 }
5152 return 0;
5153 }
5154
We have GitGutter installed, so it tells us about modified lines that
are not commmited. So let's change line 5152:
5147 }
5148
5149 return sign->typenr;
5150 }
5151 }
~ 5152 return 0;
5153 }
5154
Now we add a mark over line 5152 using 'ma' in normal mode:
5147 }
5148
5149 return sign->typenr;
5150 }
5151 }
a ~ 5152 return 0;
5153 }
5154
Previously, Vim/Nvim would have picked only one of the signs,
because there was no support for having multiple signs in a line.
- Remove signs from deleted lines.
Suppose we have highlights on a group of lines and we delete them:
+ 6 use std::ops::Deref;
--+ 7 use std::borrow::Cow;
--+ 8 use std::io::{Cursor};
9 use proc_macro2::TokenStream;
10 use syn::export::ToTokens;
--+ 11 use std::io::Write;
>> 12 use std::ops::Deref;
Without this change, these signs will momentarily accumulate in
the sign column until the plugins wake up to refresh them.
+ --+ --+ --+ >> 6
Discussion: It may be better to extend the API a bit and allow this
to happen for only certain types of signs. For example, VIM marks
and vim-gitgutter removal signs may want to be presreved, unlike
line additions and linter highlights.
- 'signcolumn': support 'auto:NUM' and 'yes:NUM' settings
- sort signs according to id, from lowest to highest. If you have
git-gutter, vim-signature, and ALE, it would appear in this order:
git-gutter - vim-signature - ALE.
- recalculate size before screen update
- If no space for all signs, prefer the higher ids (while keeping the
rendering order from low to high).
- Prevent duplicate signs. Duplicate signs were invisible to the user,
before using our extended non-standard signcolumn settings.
- multi signcols: fix bug related to wrapped lines.
In wrapped lines, the wrapped parts of a line did not include the extra
columns if they existed. The result was a misdrawing of the wrapped
parts. Fix the issue by:
1. initializing the signcol counter to 0 when we are on a wrap boundary
2. allowing for the draw of spaces in that case.
Why?
- Because we can.
- Because the TUI is just another GUI™
- Because it looks kinda nice, and provides useful context like 1 out of 100
times
Complies with "don't pay for what you don't use".
Some crashes for resizing were unfolded, add tests for those.
Makes the 'scrollback' option more consistent (same default for all buffers) and future-proof.
- Default to -1 for all buffers, but treat it as an implementation detail.
- Document range of 1 - 100_000.
- New terminal buffer by default sets scrollback=10_000 if the global default is -1.
- Existing terminal buffer: On entering terminal-mode or on refresh, if the user explicitly did `:set[local] scbk=-1`, the local value goes to 100_000 (max). (This is undocumented on purpose. Users should work with explicit values in the range of 1-100_000.)
Problem: Showing two characters for tab is limited.
Solution: Allow for a third character for "tab:" in 'listchars'. (Nathaniel
Braun, Ken Takata, closesvim/vim#3810)
83a52171ba
Using 'listchars' is a nice way to highlight tabs that were included by accident
for buffers that set 'expandtab'.
But maybe one does not want this for buffers that set 'noexpandtab', so now one
can use:
autocmd FileType go let &l:listchars .= ',tab: '
Problem: It is not so easy to write a script that works with both Python 2 and Python 3, even when the Python code works with both.
Solution: Add 'pyxversion', :pyx, etc. (Marc Weber, Ken Takata)
f42dd3c390
The purpose of the {Nvim} hint was not well-defined, and its usage
inconsistent. It's also unnecessary.
Nvim-Vim differences are centralized at:
:help vim-differences
Removed things are centralized at:
:help deprecated
Developer guidelines for documentation are listed at:
:help dev-doc
Problem: Using an external diff program is slow and inflexible.
Solution: Include the xdiff library. (Christian Brabandt)
Use it by default.
e828b7621c
vim-patch:8.1.0360
vim-patch:8.1.0364
vim-patch:8.1.0366
vim-patch:8.1.0370
vim-patch:8.1.0377
vim-patch:8.1.0378
vim-patch:8.1.0381
vim-patch:8.1.0396
vim-patch:8.1.0432
By historical accident, Nvim defaults to background=light. So on a dark
background, `:colorscheme default` looks completely wrong.
The "smart" logic that Vim uses is confusing for anyone who uses Vim on
multiple platforms, so rather than mimic that, pick the (hopefully) most
common default.
- Since Neovim is dark-powered, we assume most users have dark backgrounds.
- Most of the GUIs tend to have a dark background by default.
ref #6289
Update runtime files.
fc65cabb15
---
vim-patch:8.0.1279: initializing menus can be slow
Problem: Initializing menus can be slow, especially when there are many
keymaps, color schemes, etc.
Solution: Do the globbing for runtime files lazlily. (Ken Takata)
Update runtime files.
b5b7562475
---
NA patch (Nvim does not ship with spell files):
vim-patch:3ad8772ef02e
Include Serbian spell input files
3ad8772ef0
- Much of the mouse chatter in gui.txt and term.txt is redundant; other
parts are outdated or irreleveant to Nvim.
- Fix default value of 'mousemodel' for Windows
Resets the TUI cursor color if:
- current 'guicursor' mode does not specify a highlight group
- cursor highlight group has "inverse" or "reverse" flag
- on Nvim exit
We interpret, "inverse" to mean "default cursor".
Example:
hi Cursor guifg=bg guibg=fg
set termguicolors
set guicursor=n-v-c-sm:block,i-ci-ve:ver25-Cursor,r-cr-o:hor20
* When the cursor shape is block, its color will be "inverse"
* When the cursor shape is I-beam, its color will be `hi Cursor`.
This is useful e.g. to prevent `set listchars=eol:¬` causing your cursor
color to a low contrast color in insert mode because you cursor are
often at EOL in insert mode.
close#8572
After this change we never release blocks from memory (in practice it
never happened because the memory limits are never reached). Let the OS
take care of that.
---
On today's systems the 'maxmem' and 'maxmemtot' values are huge (4+ GB)
so the limits are never reached in practice, but Vim wastes a lot of
time checking if the limit was reached.
If the limit is reached Vim starts saving pieces of the swap file that were in
memory to the disk. Said in a different way: Vim implements its own
memory-paging mechanism. This is unnecessary and inefficient since the
operating system already has virtual memory and will swap to the disk if
programs start using too much memory.
This change does...
1. Reduce the number of config options and need for documentation.
2. Make the code more efficient as we don't have to keep track of memory
usage nor check if the memory limits were reached to start swapping
to disk every time we need memory for buffers.
3. Simplify the code. Once memfile.c is simple enough it could be
replaced by actual operating system memory mapping (mmap,
MemoryViewOfFile...). This change does not prevent Vim to recover
changes from swap files since the swapping code is never triggered
with the huge limits set by default.
ref #6725
fsync() is very slow on some systems. And since the parent commit, Nvim
is smarter about flushing files at certain times (e.g. CursorHold),
regardless of whether 'fsync' is enabled. So it's less risky to disable
'fsync'.
Profiling showed slow (2-4s) :write and :quit caused by fsync():
:quit
shada_write_file(NULL, false);
:write + fsync
0 0x00007f72da567b2d in fsync () at ../sysdeps/unix/syscall-template.S:84
1 0x0000000000638970 in uv__fs_fsync (req=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:150
2 uv__fs_work (w=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:953
3 0x0000000000639a70 in uv_fs_fsync (loop=<optimized out>, req=<optimized out>, file=41, cb=0x7f72da567b2d <fsync+45>)
at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:1094
4 0x0000000000573694 in os_fsync (fd=41) at ../src/nvim/os/fs.c:631
5 0x00000000004ec9dc in buf_write (buf=<optimized out>, fname=<optimized out>, sfname=<optimized out>, start=1, end=1997, eap=0x7fffc864c570,
append=<optimized out>, forceit=<optimized out>, reset_changed=<optimized out>, filtering=<optimized out>) at ../src/nvim/fileio.c:3387
6 0x00000000004b44ff in do_write (eap=0x7fffc864c570) at ../src/nvim/ex_cmds.c:1745
...
:write + nofsync
0 0x00007f72da567b2d in fsync () at ../sysdeps/unix/syscall-template.S:84
1 0x0000000000638970 in uv__fs_fsync (req=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:150
2 uv__fs_work (w=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:953
3 0x0000000000639a70 in uv_fs_fsync (loop=<optimized out>, req=<optimized out>, file=36, cb=0x7f72da567b2d <fsync+45>)
at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:1094
4 0x0000000000573694 in os_fsync (fd=36) at ../src/nvim/os/fs.c:631
5 0x0000000000528f5a in mf_sync (mfp=0x7f72d8968d00, flags=5) at ../src/nvim/memfile.c:466
6 0x000000000052d569 in ml_preserve (buf=0x7f72d890f000, message=0) at ../src/nvim/memline.c:1659
7 0x00000000004ebadf in buf_write (buf=<optimized out>, fname=<optimized out>, sfname=<optimized out>, start=1, end=1997, eap=0x7fffc864c570,
append=<optimized out>, forceit=<optimized out>, reset_changed=<optimized out>, filtering=<optimized out>) at ../src/nvim/fileio.c:3071
8 0x00000000004b44ff in do_write (eap=0x7fffc864c570) at ../src/nvim/ex_cmds.c:1745
...
closes#7698
Wrapping a command in double-quotes allows cmd.exe to safely dequote the
entire command as if the user entered the entire command in an
interactive prompt. This reduces the need to escape nested and uneven
double quotes.
The `/s` flag of cmd.exe makes the behaviour more reliable:
:set shellcmdflag=/s\ /c
Before this patch, cmd.exe cannot use cygwin echo.exe (as opposed to
cmd.exe `echo` builtin) even if it is wrapped in double quotes.
Example:
:: internal echo
> cmd /s /c " echo foo\:bar" "
foo\:bar"
:: cygwin echo.exe
> cmd /s /c " "echo" foo\:bar" "
foo:bar
Currently writedelay shows the sequence of characters that are sent to
the UI/TUI module. Here nvim has already applied an optimization: when
attempting to put a char in a screen cell, if the same char already was
there with the same attributes, UI output is disabled. When debugging
redrawing it it sometimes more useful to inspect the redraw stream one
step earlier, what region of the screen nvim actually is recomputing
from buffer contents (win_line) and from evaluating statusline
expressions.
Take the popupmenu as an example. When closing the popupmenu (in the
TUI), currently 'writedelay' looks like vim only is redrawing the region
which the pum covered. This is not what happens internally: vim redraws
the entire screen, even if only outputs the changed region.
This commit allows negative values of 'writedelay', which causes a delay
for all redrawn characters, even if the character already was displayed
by the UI before.
Most fonts should have these by now. Both are a significant visual
improvement.
- Vertical connecting bar `│` is used by tmux, pstree, Windows 7 cmd.exe
and nvim-qt.exe.
- Middle dot `·` works on Windows 7 cmd.exe, nvim-qt.exe.
For reference: tmux uses these chars to draw lines: │ ├ ─
Problem: 'hlsearch' highlighting not removed after incsearch (lacygoill)
Solution: Redraw all windows. Start search at the end of the match. Improve
how CTRL-G works with incremental search. Add tests. (Christian
Brabandt, Hirohito Higashi, haya14busa, closesvim/vim#2267)
f8f8b2eadb
Problem: Incremental search only shows one match.
Solution: When 'incsearch' and and 'hlsearch' are both set highlight all
matches. (haya14busa, closesvim/vim#2198)
2e51d9a097
Problem: Cannot set a separate highlighting for the current line in the
quickfix window.
Solution: Add QuickFixLine. (anishsane, closesvim/vim#1755)
2102035488
Problem: When running :make the output may be in the system encoding,
different from 'encoding'.
Solution: Add the 'makeencoding' option. (Ken Takata)
2c7292dc5b
Get terminal debugging info by starting Nvim with 'verbose' level 3:
nvim -V3log
This is like Vim's `:set termcap`, which was removed in Nvim (and would
be very awkward to restore because of the decoupled UI).
The flag enables the current local directory set by ":lcd" to be saved
to views which is the current default behaviour. The option can be
removed to disable this behaviour.
closes#7435
vim-patch:8.0.1289
Runtime updates that were bundled into the otherwise NA commit:
Problem: "make proto" adds extra function prototype.
Solution: Add vim/vim#ifdef.
5162822914
- Prefer "TUI" where possible to refer to the host terminal.
- Remove obsolete tags and ancient TTY exposition.
- Establish "terminal" to consistently mean "terminal emulator" in all
Nvim documentation. This removes the need for verbose qualifiers in
tags and prose.
References #6280
References #6803
The details are in the on-line help under :help cursor-shape .
The brief precis is that nvim is following the lead of tmux, and going
beyond what tmux does to make cursor shape changes work on a broad range of
terminals. This includes on tmux itself, which is no longer bypassed.
Reverts commit 337b6179dfCloses#6716 at the expense of not being able to use a
multi-key 'pastetoggle' manually.
Multi-key 'pastetoggle' can still be used when inserting the entire
option into the typebuffer at once (though the use here is
questionable).
Also remove those tests to do with waiting for the completion of
'pastetoggle' and mention in the documentation that 'pastetoggle'
doesn't wait for timeout.
Calling cmd.exe in Windows follows a very different pattern from Vim.
The primary difference is that Vim does a nested call to cmd.exe, e.g.
the following call in Vim
system('echo a 2>&1')
spawns the following processes
"C:\Program Files (x86)\Vim\vim80\vimrun" -s C:\Windows\system32\cmd.exe /c (echo a 2^>^&1
^>C:\Users\dummy\AppData\Local\Temp\VIoC169.tmp 2^>^&1)
C:\Windows\system32\cmd.exe /c C:\Windows\system32\cmd.exe /c (echo a 2^>^&1
^>C:\Users\dummy\AppData\Local\Temp\VIo3C6C.tmp 2^>^&1)
C:\Windows\system32\cmd.exe /c (echo a 2>&1
>C:\Users\dummy\AppData\Local\Temp\VIo3C6C.tmp 2>&1)
The escaping with ^ is needed because cmd.exe calls itself and needs to
preserve the special metacharacters for the last call. However in nvim
no nested call is made, system('') spawns a single cmd.exe process.
Setting shellxescape to "" disables escaping with ^.
The previous default for shellxquote=( wrapped any command in
parenthesis, in Vim this is more meaningful due to the use of tempfiles
to store the output and redirection (also see &shellquote). There is
a slight benefit in having the default be empty because some expressions
that run in console will not run within parens e.g. due to unbalanced
double quotes
system('echo "a b')
> The option 'maxmem' ('mm') is used to set the maximum memory used for one
> buffer (in kilobytes). 'maxmemtot' is used to set the maximum memory used for
> all buffers (in kilobytes). The defaults depend on the system used. These
> are not hard limits, but tell Vim when to move text into a swap file. If you
> don't like Vim to swap to a file, set 'maxmem' and 'maxmemtot' to a very large
> value. The swap file will then only be used for recovery. If you don't want
> a swap file at all, set 'updatecount' to 0, or use the "-n" argument when
> starting Vim.
On today's systems these values are huge (4GB in my machine with 8GB of RAM
since it's set as half the available memory by default) so the limits are
never reached in practice, but Vim wastes a lot of time checking if the limit
was reached.
If the limit is reached Vim starts saving pieces of the swap file that were in
memory to the disk. Said in a different way: Vim implements its own memory
swapping mechanism. This is unnecessary and inefficient since the operating
system already virtualized the memory and will swap to the disk if programs
start using too much memory.
This change does...
1. Reduce the number of config options and need for documentation.
2. Make the code more efficient as we don't have to keep track of memory usage
nor check if the memory limits were reached to start swapping to disk every
time we need memory for buffers.
3. Simplify the code. Once `memfile.c` is simple enough it could be replaced by
actual operating system memory mapping (`mmap`, `MemoryViewOfFile`...).
This change does not prevent Vim to recover changes from swap files since the
swapping code is never triggered with the huge limits set by default.
Adds os_strerror() result to a number of places. Also since I could not track
where err\* variables are NULL and where they are not, using macros to make sure
that all three variables are set at once.
Removes #ifdef UNIX around the use of os_fsync, makes it use os_close in place
of close in some places.
For now only supports valid hex colors (does not check for the validity
the hex color) when termguicolors is set, otherwise it won't attempt to
change the cursor color.
Make the 'scrollback' option work like most other buffer-local options:
- `:set scrollback=x` sets the global and local value
- `:setglobal scrollback=x` sets only the global default
- new terminal buffers inherit the global
Normal buffers are still always -1, and :setlocal there is an error.
Closes#6337
Problem: 'formatprg' is a global option but the value may depend on the
type of buffer. (Sung Pae)
Solution: Make 'formatprg' global-local. (closesvim/vim#1380)
9be7c04e6c
- Vim "unix default" of 'noshowcmd' is serving few users. And it's
inconsistent.
- 'ruler' and 'belloff=all' improve the out-of-the-box experience.
- Continue to use 'noshowcmd' and 'noruler' by default in the functional
tests to keep them fast.
TODO: Add a "disable slow stuff" command or mapping to address the
use-case of a very slow terminal connection.
Problem: There is no equivalent of 'smartcase' for a tag search.
Solution: Add value "followscs" and "smart" to 'tagcase'. (Christian
Brabandt, closesvim/vim#712) Turn tagcase test into new style.
66e29d7112
In order to not conflict with new error codes that Vim adds, all Neovim
error codes should be above 5000. The three existing sub-5000 error
codes (E926, E951, and E952) are now E50003, E5004, and E5005
respectively.
E953 was removed in 6167ce6df2, so just
remove it from the help.
command_line_changed:
- Check (current_SID == 0) instead of KeyTyped
- We want to update during mappings (KeyTyped is false then).
- Check vpeekc_any()
- Avoids unnecessary work.
- Avoids triggering live preview during macros.
- Caveat: This makes the redraw "stutter" if user spams (holds a key)
in the replace pattern. But that scenario is not important.
- Update screen if the command is changed to a non-live command.
(`s->live` goes from true => false) => clears the preview
command_line_execute:
- Let CTRL-C cancel live preview
do_sub:
- Enforce a time limit ('redrawtime').
- Unset 'inccommand' if time limit is reached.
Closes#5602Closes#5585
- Use a standard scratch buffer instead of a new 'buftype', functions
like curbufIsChanged() already have special handling for scratch bufs.
- Cleanup some stuff from the previous merge.
- Add support for :smagic, :snomagic. Closes#5578
'inccommand' allows us to expand the feature to other commands, such as:
:cdo
:cfdo
:global
Also rename "IncSubstitute" highlight group to "Substitute".
- Eliminate/isolate static/global variables
- Remove special-case parameter from buflist_new()
- Remove special-case ECMD_RESERVED_BUFNR
- To determine when u_undo_and_forget() should be done, check
b_changedtick instead of a heuristic.
- use mb_string2cells() instead of strlen() to measure the :sub patterns
- call ml_close() before buf_clear_file(). Avoids leaks caught by ASan.
Original patch by:
Robin Elrharbi-Fleury (Robinhola)
Audrey Rayé (Adrey06)
Philémon Hullot (DesbyP)
Aymeric Collange (aym7)
Clément Guyomard (Clement0)
Originally implemented by
* Clement0
* DesbyP
* aym7
* Adrey06
* Robinhola
in #4811. Major reworkings and bug
fixes by
* bfredl
Most tests suggested by ZyX-l, suggestions for improvements by oni-link.
Closes#5449
A file containing the string "vim" followed by a very large number in a modeline
location will trigger an overflow in getdigits() which is called by
chk_modeline() when trying to parse the version number.
Add getdigits_safe(), which does not assert overflows, but reports them to the
caller.
vim-patch:7.4.2109
Problem: Setting 'display' to "lastline" is a drastic change, while
omitting it results in lots of "@" lines.
Solution: Add "truncate" to show "@@@" for a truncated line.
ad9c2a08f0
Problem: Although emoji characters are ambiguous width, best is to treat
them as full width.
Solution: Update the Unicode character tables. Add the 'emoji' options.
(Yasuhiro Matsumoto)
3848e00e01
`deprecated.txt` is a place for deprecated tags to live.
- Encourages aggressive documentation of deprecations without cluttering
the main help files.
- Provides a single browsable reference of all deprecations.
Other changes:
- Move tags to doc/vim_diff.txt.
- Remove doc/quotes.txt. It has little historical value, except maybe the
Larry Wall quote.
- Use the default buffer text provided by before_each (avoids extra steps and
makes the tests more consistent with each other)
- Indent
- Adjust help doc
Updated runtime files.
03413f4416
Ignore changes to
* doc/Makefile, doc/help.txt: Related to Vim's version8 documentation
* doc/gui_x11.txt, doc/todo.txt, doc/vim.1, gvim.desktop, vim.desktop:
Irrelevant to Neovim
* doc/quickref.txt, doc/options.txt: As of yet unported 'emoji'
* doc/tags, syntax/vim.vim: Generated at build time
Updated runtime files.
4f3f668c84
Ignore changes to
* doc/channel.txt: Channel related docs
* doc/tags: Generated at build time
* doc/todo.txt: Irrelevant to Neovim
Updated runtime files.
77cdfd1038
Ignore changes to:
* doc/channel.txt, doc/eval.txt: Channel related docs
* doc/options.txt: GUI related docs
* doc/tags: Generated at build time
* doc/todo.txt: Irrelevant for Neovim
Updated runtime files.
e0fa3742ea
Ignore changes to
* doc/channel.txt: Channel related docs
* doc/netbeans.txt, doc/os_dos.txt, doc/todo.txt: Not relevant to Neovim
* doc/tags: Generated at build time
Update runtime files.
38a55639d6
Ignore changes to
* doc/channel.txt, doc/eval.txt, doc/various.txt: Channel related docs
* doc/tags: Generated at build time
* doc/todo.txt, doc/vi_diff.txt: Not relevant to neovim
Updated runtime files and translations.
5e9b2fa9bb
Ignore changes to
* doc/tags: generated at build time
* doc/develop.txt, doc/todo.txt, doc/netbeans.txt, doc/vim-ja.UTF-8.1,
doc/xxd-ja.UTF-8.1, lang/menu_*: Not applicable to Neovim
* doc/editing.txt: Crypt related
* doc/change.txt, doc/insert.txt, doc/various.txt: Removal of ex_extra
tags, which already happened in Neovim
* doc/vim-ja.UTF-8.1, doc/xxd-ja.UTF-8.1
Updated runtime files.
fa7353428f
Missing in runtime/doc: if_tcl.txt, tags, todo.txt, version5.txt. Some
other changes related to binary nrformats were already merged.
TODO: Only works at startup (i.e., in the user's init.vim/vimrc/--cmd),
but it should probably work at any time.
---
patch 7.4.1799
Problem: 'guicolors' is a confusing option name.
Solution: Use 'termguicolors' instead. (Hirohito Higashi)
61be73bb0f
patch 7.4.1806
Problem: 'termguicolors' option missing from the options window.
Solution: Add the entry.
8e3d1b6326
patch 7.4.1808
Problem: Using wrong feature name to check for 'termguicolors'.
Solution: Use the right feature name. (Ken Takata)
8a24b794b8
patch 7.4.1809
Problem: Using wrong short option name for 'termguicolors'.
Solution: Use the option name.
868cfc19bb
Update runtime files.
d042dc825c
Missing in runtime/doc: hangulin.txt, tags, todo.txt. The changes to options.txt
do not apply for nvim. man.vim is very different in nvim, some changes applied
manually, others discarded.
Update runtime files.
e392eb41f8
Files runtime/doc/tags and runtime/doc/todo.txt did not exist. Ignored
runtime/syntax/vim.vim. One change in runtime/doc/windows.txt had already been
applied.
Problem: User may yank or put using the register being recorded in.
Solution: Add the recording register in the message. (Christian Brabandt,
closesvim/vim#470)
a0ed84a268
Problem: Cannot specify a vertical split when loading a buffer for a
quickfix command.
Solution: Add the "vsplit" value to 'switchbuf'. (Brook Hong)
a594d77ffc
Problem: Cannot use the "dll" options on MS-Windows.
Solution: Support the options on all platforms. Use the built-in name as
the default, so that it's clear what Vim is looking for.
25e4fcde76
Problem: The default conceal character is documented to be a space but it's
initially a dash. (Christian Brabandt)
Solution: Make the intial value a space.
4a42710695
Problem: On some systems automatically adding the missing EOL causes
problems. Setting 'binary' has too many side effects.
Solution: Add the 'fixeol' option, default on. (Pavel Samarkin)
34d72d4b6c
"vimrc" refers to all files that are used to configure Neovim. The main
configuration file is init.vim nowadays.
All nvimrc references that are left refer to a local ".nvimrc" which is read
if 'exrc' is set. ".ngvimrc" references were completely wiped.
Closes#3552.
Note about ~/.local/share/nvim/site used in one usr_\* file: this one talks
about user-local installation of third-party plugins, and
~/.local/share/nvim/site is the proper place for them. Most other files talk
about user own configuration and this is ~/.config.
Commit e3568364 ("default: enable 'langnoremap'. #2853") enabled it by
default but forgot to remove the lines saying it's disabled by default.
tweaked by Michael Reed
Reviewed-by: Felipe Morales <hel.sheep@gmail.com>
[ci skip]
What works:
1. ShaDa file dumping: header, registers, jump list, history, search patterns,
substitute strings, variables.
2. ShaDa file reading: registers, global marks, variables.
Most was not tested.
TODO:
1. Merging.
2. Reading history, local marks, jump and buffer lists.
3. Documentation update.
4. Converting some data from &encoding.
5. Safer variant of dumping viminfo (dump to temporary file then rename).
6. Removing old viminfo code (currently masked with `#if 0` in a ShaDa file for
reference).
- new feature: if the first character of 'keywordprg' is ":", the
command is invoked as a Vim ex-command prefixed with [count].
- change default 'keywordprg' to :Man
vim-tutor-mode provides a mechanism to write and read interactive
tutorials in vim. It's aim is to replace the venerable vimtutor with a
more modern system.
The plugin's development is maintained at https://github.com/fmoralesc
/vim-tutor-mode
Closes#2351.
Reviewed-by: Felipe Morales <hel.sheep@gmail.com>
Reviewed-by: Justin M. Keyes <justinkz@gmail.com>
Reviewed-by: Michael Reed <Pyrohh@users.noreply.github.com>
- CPO_ALL and CPO_VI are identical, so merge them
- No longer check for the environment variable 'VIM_POSIX'
- In vim_diff.txt, mention the removal of 'cpoptions' flags
Presumably due to tarruda's unifdefing, it was already a no-op at the
time of nvim's first commit.
It's probably better to be clear that it doesn't exist, as opposed to
users thinking `:set guipty` is doing something when it isn't.
<C-A> over "07" should increment to "08" by default.
Re: https://github.com/neovim/neovim/issues/1664
Reviewed-by: Justin M. Keyes <justinkz@gmail.com>
Reviewed-by: Scott Prager <splinterofchaos@gmail.com>
Reviewed-by: Michael Reed <m.reed@mykolab.com>
Regarding debugger.txt (which was Spotted by @Hettomei):
The third section was empty, and the second section is very outdated.
Nvim doesn't have things like Balloon Evalutation and Sun Visual
workshop integration, so just remove the section.
Regarding everything else:
- term.[ch] and term_defs.h don't exist anymore, so remove refs to them
- Add ttybuiltin to vim_diff.txt. It should have been done before, but
vim_diff.txt didn't exist when ttybuiltin was removed (done in
3baba1e7bc6698e6bc9f1d37fce88b30d6274bc9,)
Helped-by: Justin M. Keyes <justinkz@gmail.com>
Remove related dead code and references in the docs.
Helped-By: Michael Reed <m.reed@mykolab.com>
Helped-By: Shougo Matsushita <Shougo.Matsu@gmail.com>
While here, alphabetically sort section 2 of vim_diff.txt
Helped-by: Jakob Schnitzer <mail@jakobschnitzer.de>
Helped-by: Felipe Morales <hel.sheep@gmail.com>
The "*" flag in 'cpoptions' makes the command :* execute the contents of
a register. Removed because
1. the same functionality exists as :@
2. it hides :* as a useful command-line shortcut for :'<,'>
3. unlike :@ it cannot be used with the * register
Helped-by: Michael Reed <m.reed@mykolab.com>
This option has already been removed in the source.
Nvim does not have a GUI, so `nvim -g` does not work.
Also add `macatsui` to the list of removed options.
This removes all instances of '{not in Vi}', '{Vi: ... }', etc.
We don't care about Vi compatibility, so all of these annotations are
useless in nvim. This also removed the syntax definitions for these
items.
In addition, remove instances of '{only when compiled with +feature}'
adjacent to instances of '{not in Vi}' and friends.
Helped-by: David Bürgin <676c7473@gmail.com>
Helped-by: Felipe Morales <hel.sheep@gmail.com>
closes#2535
Regarding |script-here|: despite being a language agnostic piece of
advice, it was in `if_perl.txt`. Regardless, we now only have one
support for one legacy plugin interface, so put it in `if_pyth.txt`
Problem: With some regexp patterns the NFA engine uses many states and
becomes very slow. To the user it looks like Vim freezes.
Solution: When the number of states reaches a limit fall back to the old
engine. (Christian Brabandt)
https://github.com/vim/vim/releases/tag/v7-4-497
Helped-by: David Bürgin <676c7473@gmail.com>
Helped-by: Justin M. Keyes <justinkz@gmail.com>
Helped-by: Scott Prager <splinterofchaos@gmail.com>
Problem: Language mapping also applies to mapped characters.
Solution: Add the 'langnoremap' option, when on 'langmap' does not apply to
mapped characters. (Christian Brabandt)
https://github.com/vim/vim/releases/tag/v7-4-502
This documents the differences between nvim and nvim.
Regarding the removal of references to 'renderoptions': it was never
added in the first place, so there's no need to mention its "removal".
Add missing parentheses and whatnot, move dangling comment, etc. Some
specific items worth mentioning:
Fixed some references to non-existent tags, found via `make html`
msgpack_rpc/channel.c:
ELOG already prefixes each line with "error @ ..."
refs #1045#1051
This was enabled by default a while ago (#1051), and has apparently not
created any issues. The amount of actual code related to it is tiny, so
it has been removed.
If you Google for this phrase found in the Vim documentation you'll find
almost exclusively hits from the Vim documentation. I think changing
"halfway a line" to "halfway through a line" makes more sense.
There seems to be an pervasive odd use of the word 'halfway' in the
original docs which I'm updating everywhere.
Notes regarding the removal of specific items:
- Aztec C: only on the Amiga.
- mch_check_win(): doesn't exist anymore.
- Comment in ex_cmds.c: It seems the context for this comment was
removed, but the comment was inadvertantly left alone.
Even when this was finally removed 6 months ago in b2b920f, it had
already been disabled for a while. Due to this, just remove all remnants
of the option as opposed to putting a placeholder like what was done for
'shortname'and 'cryptmethod'.
Closes https://github.com/neovim/docs/pull/26
Also added stubs for 'cryptmethod' and 'key', and placeholders for
explanation regarding removal of crypto functionality.
Vim runtime files based on 7.4.384 / hg changeset 7090d7f160f7
Excluding:
Amiga icons (*.info, icons/)
doc/hangulin.txt
tutor/
spell/
lang/ (only used for menu translations)
macros/maze/, macros/hanoi/, macros/life/, macros/urm/
These were used to test vi compatibility.
termcap
"Demonstration of a termcap file (for the Amiga and Archimedes)"
Helped-by: Rich Wareham <rjw57@cam.ac.uk>
Helped-by: John <john.schmidt.h@gmail.com>
Helped-by: Yann <yann@yann-salaun.com>
Helped-by: Christophe Badoit <c.badoit@lesiteimmo.com>
Helped-by: drasill <github@tof2k.com>
Helped-by: Tae Sandoval Murgan <taecilla@gmail.com>
Helped-by: Lowe Thiderman <lowe.thiderman@gmail.com>
