Problem:
`vim.ui.open` unnecessarily invents a different success/failure
convention. Its return type was changed in 57adf8c6e0, so we might as
well change it to have a more conventional form.
Solution:
Change the signature to use the `pcall` convention of `status, result`.
vim.fs.root() is a function for finding a project root relative to a
buffer using one or more "root markers". This is useful for LSP and
could be useful for other "projects" designs, as well as for any plugins
which work with a "projects" concept.
TODO:
FUNC_API_REMOTE_ONLY APIs such as `nvim_ui_*` cannot (yet) be used in
`nvim_exec_lua`. We can change FUNC_API_REMOTE_ONLY to allow
Vimscript/Lua to pass an explicit `channel_id`. #28437
Problem:
The use-case for the convenience functions vim.iter.map(),
vim.iter.filter(), vim.iter.totable() is not clear.
Solution:
Drop them for now. We can revisit after 0.10 release.
Problem:
We need to establish a pattern for `enable()`.
Solution:
- First `enable()` parameter is always `enable:boolean`.
- Update `vim.diagnostic.enable()`
- Update `vim.lsp.inlay_hint.enable()`.
- It was not released yet, so no deprecation is needed. But to help
HEAD users, it will show an informative error.
- vim.deprecate():
- Improve message when the "removal version" is a *current or older* version.
Problem:
vim.diagnostic.enable() does not match the signature of vim.lsp.inlay_hint.enable()
Solution:
- Change the signature so that the first 2 args are (bufnr, enable).
- Introduce a 3rd `opts` arg.
- Currently it only supports `opts.ns_id`.
Problem:
`vim.diagnostic.is_disabled` and `vim.diagnostic.disable` are unnecessary
and inconsistent with the "toggle" pattern (established starting with
`vim.lsp.inlay_hint`, see https://github.com/neovim/neovim/pull/25512#pullrequestreview-1676750276
As a reminder, the rationale is:
- we always need `enable()`
- we always end up needing `is_enabled()`
- "toggle" can be achieved via `enable(not is_enabled())`
- therefore,
- `toggle()` and `disable()` are redundant
- `is_disabled()` is a needless inconsistency
Solution:
- Introduce `vim.diagnostic.is_enabled`, and `vim.diagnostic.enable(…, enable:boolean)`
- Note: Future improvement would be to add an `enable()` overload `enable(enable:boolean, opts: table)`.
- Deprecate `vim.diagnostic.is_disabled`, `vim.diagnostic.disable`
Problem: noautocmd is confusing; despite its name, it doesn't block all
autocommands (instead it blocks only those related to setting the buffer), and
is commonly used by plugins to open windows while producing minimal
side-effects.
Solution: be consistent and block all autocommands when noautocmd is set.
This includes WinNew (again), plus autocommands from entering the window (if
enter is set) like WinEnter, WinLeave, TabEnter, .etc.
See the discussion at https://github.com/neovim/neovim/pull/14659#issuecomment-2040029517
for more information.
Remove win_set_buf's noautocmd argument, as it's no longer needed.
NOTE: pum_create_float_preview sets noautocmd for win_set_buf, but all its
callers already use block_autocmds.
Despite that, pum_create_float_preview doesn't actually properly handle
autocommands (it has no checks for whether those from win_enter or
nvim_create_buf free the window).
For now, ensure autocommands are blocked within it for correctness (in case it's
ever called outside of a block_autocmds context; the function seems to have been
refactored in #26739 anyway).
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
Design
- Enable commenting support only through `gc` mappings for simplicity.
No ability to configure, no Lua module, no user commands. Yet.
- Overall implementation is a simplified version of 'mini.comment'
module of 'echasnovski/mini.nvim' adapted to be a better suit for
core. It basically means reducing code paths which use only specific
fixed set of plugin config.
All used options are default except `pad_comment_parts = false`. This
means that 'commentstring' option is used as is without forcing single
space inner padding.
As 'tpope/vim-commentary' was considered for inclusion earlier, here is
a quick summary of how this commit differs from it:
- **User-facing features**. Both implement similar user-facing mappings.
This commit does not include `gcu` which is essentially a `gcgc`.
There are no commands, events, or configuration in this commit.
- **Size**. Both have reasonably comparable number of lines of code,
while this commit has more comments in tricky areas.
- **Maintainability**. This commit has (purely subjectively) better
readability, tests, and Lua types.
- **Configurability**. This commit has no user configuration, while
'vim-commentary' has some (partially as a counter-measure to possibly
modifying 'commentstring' option).
- **Extra features**:
- This commit supports tree-sitter by computing `'commentstring'`
option under cursor, which can matter in presence of tree-sitter
injected languages.
- This commit comments blank lines while 'tpope/vim-commentary' does
not. At the same time, blank lines are not taken into account when
deciding the toggle action.
- This commit has much better speed on larger chunks of lines (like
above 1000). This is thanks to using `nvim_buf_set_lines()` to set
all new lines at once, and not with `vim.fn.setline()`.
Problem: Injecting languages for file redirects (e.g., in bash) is not
possible.
Solution: Add `@injection.filename` capture that is piped through
`vim.filetype.match({ filename = node_text })`; the resulting filetype
(if not `nil`) is then resolved as a language (either directly or
through the list maintained via `vim.treesitter.language.register()`).
Note: `@injection.filename` is a non-standard capture introduced by
Helix; having two editors implement it makes it likely to be upstreamed.
Tree-sitter queries can add URLs to a capture using the `#set!`
directive, e.g.
(inline_link
(link_text) @text.reference
(link_destination) @text.uri
(#set! @text.reference "url" @text.uri))
The pattern above is included by default in the `markdown_inline`
highlight query so that users with supporting terminals will see
hyperlinks. For now, this creates a hyperlink for *all* Markdown URLs of
the pattern [link text](link url), even if `link url` does not contain
a valid protocol (e.g. if `link url` is a path to a file). We may wish to
change this in the future to only linkify when the URL has a valid
protocol scheme, but for now we delegate handling this to the terminal
emulator.
In order to support directives which reference other nodes, the
highlighter must be updated to use `iter_matches` rather than
`iter_captures`. The former provides the `match` table which maps
capture IDs to nodes. However, this has its own challenges:
- `iter_matches` does not guarantee the order in which patterns are
iterated matches the order in the query file. So we must enforce
ordering manually using "subpriorities" (#27131). The pattern index of
each match dictates the extmark's subpriority.
- When injections are used, the highlighter contains multiple trees. The
pattern indices of each tree must be offset relative to the maximum
pattern index from all previous trees to ensure that extmarks appear
in the correct order.
- The `iter_captures` implementation currently has a bug where the
"match" table is only returned for the first capture within a pattern
(see #27274). This bug means that `#set!` directives in a query
apply only to the first capture within a pattern. Unfortunately, many
queries in the wild have come to depend on this behavior.
`iter_matches` does not share this flaw, so switching to
`iter_matches` exposed bugs in existing highlight queries. These
queries have been updated in this repo, but may still need to be
updated by users. The `#set!` directive applies to the _entire_ query
pattern when used without a capture argument. To make `#set!`
apply only to a single capture, the capture must be given as an
argument.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
Query patterns can contain quantifiers (e.g. (foo)+ @bar), so a single
capture can map to multiple nodes. The iter_matches API can not handle
this situation because the match table incorrectly maps capture indices
to a single node instead of to an array of nodes.
The match table should be updated to map capture indices to an array of
nodes. However, this is a massively breaking change, so must be done
with a proper deprecation period.
`iter_matches`, `add_predicate` and `add_directive` must opt-in to the
correct behavior for backward compatibility. This is done with a new
"all" option. This option will become the default and removed after the
0.10 release.
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Co-authored-by: MDeiml <matthias@deiml.net>
Co-authored-by: Gregory Anders <greg@gpanders.com>
https://github.com/neovim/neovim/pull/27428 changed the semantics of
callbacks passed to nvim_create_autocmd such that any truthy value will
delete the autocommand (rather than just the literal boolean value
`true`). Update the documentation accordingly and add an entry to
`news.txt`.
The behavior is now consistent between nvim_create_autocmd and
nvim_buf_attach.
and for return value of nlua_exec/nlua_call_ref, as this uses
the same family of functions.
NB: the handling of luaref:s is a bit of a mess.
add api_luarefs_free_XX functions as a stop-gap as refactoring
luarefs is a can of worms for another PR:s.
as a minor feature/bug-fix, nvim_buf_call and nvim_win_call now preserves
arbitrary return values.
When "q" is set in 'shortmess' it now fully hides the "recording @a" message
when you are recording a macro instead of just shortening to "recording". This
removes duplication when using reg_recording() in the statusline.
Related #19193
Problem:
Since 2448816956, the --startuptime report shows
two blocks of data. The TUI process and its embedded nvim process write to the
file concurrently, which may interleave the two startup sequences into the same
timeline.
Solution:
Report each process as a separate section in the same file.
1. Each process buffers the full report.
2. After startup is finished, the buffer is flushed (appended) to the file.
Fix#23036
Sample report:
--- Startup times for process: Primary/TUI ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.428 000.422: event init
000.728 000.301: early init
...
005.880 000.713: init highlight
005.882 000.002: --- NVIM STARTED ---
--- Startup times for process: Embedded ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.409 000.403: event init
000.557 000.148: early init
000.633 000.077: locale set
...
014.383 000.430: first screen update
014.387 000.003: --- NVIM STARTED ---
Getting current channel info was kind of annoying via RPC. Two
functions had to be called:
1. `nvim_get_api_info` which returns `[channel_id, meta_data]`.
- This results in `channel_id = api.nvim_get_api_info()[0]`.
- Here the meta_data is sent but never used.
2. Finally call `nvim_get_chan_info(channel_id)`.
This commit reduces the need for `nvim_get_api_info` as passing 0
returns current channel info.
Problem:
- `:InspectTree` was showing node ranges in 1-based indexing, i.e., in
vim cursor position (lnum, col). However, treesitter API adopts
0-based indexing to represent ranges (Range4). This can often be
confusing for developers and plugin authors when debugging code
written with treesiter APIs.
Solution:
- Change to 0-based indexing from 1-based indexing to show node ranges
in `:InspectTree`.
- Note: To make things not complicated, we do not provide an option or
keymap to configure which indexing mode to use.
Extmarks can contain URLs which can then be drawn in any supporting UI.
In the TUI, for example, URLs are "drawn" by emitting the OSC 8 control
sequence to the TTY. On terminals which support the OSC 8 sequence this
will create clickable hyperlinks.
URLs are treated as inline highlights in the decoration subsystem, so
are included in the `DecorSignHighlight` structure. However, unlike
other inline highlights they use allocated memory which must be freed,
so they set the `ext` flag in `DecorInline` so that their lifetimes are
managed along with other allocated memory like virtual text.
The decoration subsystem then adds the URLs as a new highlight
attribute. The highlight subsystem maintains a set of unique URLs to
avoid duplicating allocations for the same string. To attach a URL to an
existing highlight attribute we call `hl_add_url` which finds the URL in
the set (allocating and adding it if it does not exist) and sets the
`url` highlight attribute to the index of the URL in the set (using an
index helps keep the size of the `HlAttrs` struct small).
This has the potential to lead to an increase in highlight attributes
if a URL is used over a range that contains many different highlight
attributes, because now each existing attribute must be combined with
the URL. In practice, however, URLs typically span a range containing a
single highlight (e.g. link text in Markdown), so this is likely just a
pathological edge case.
When a new highlight attribute is defined with a URL it is copied to all
attached UIs with the `hl_attr_define` UI event. The TUI manages its own
set of URLs (just like the highlight subsystem) to minimize allocations.
The TUI keeps track of which URL is "active" for the cell it is
printing. If no URL is active and a cell containing a URL is printed,
the opening OSC 8 sequence is emitted and that URL becomes the actively
tracked URL. If the cursor is moved while in the middle of a URL span,
we emit the terminating OSC sequence to prevent the hyperlink from
spanning multiple lines.
This does not support nested hyperlinks, but that is a rare (and,
frankly, bizarre) use case. If a valid use case for nested hyperlinks
ever presents itself we can address that issue then.
'foldtext' can be set to an empty string to disable and render the
line with:
- extmark highlight
- syntax highlighting
- search highlighting
- no line wrapping
- spelling
- conceal
- inline virtual text
- respects `fillchars:fold`
Currently normal virtual text is not displayed
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
perf: make screen size and position calculations more efficient
N/A patches for version.c:
vim-patch:9.1.0037: Calling get_breakindent_win() repeatedly when computing virtcol
vim-patch:9.1.0038: Unnecessary loop in getvcol()
When computing on-screen size or position, the size 'breakindent' and 'showbreak' is now cached,
and checks for whether a faster character size function can be used are performed only once at the start.
Multibyte characters are not decodes multiple times anymore, and character decoding functions are more efficient.
Additionally, the amount of trailing spaces for pasted blockwise text is now calculated correctly for multibyte characters.
Internal lisp formatting now doesn't erroneously use inline virtual text from a different line.
- Problem: One cannot easily write something like, for example:
`version_current >= {0, 10, 0}`; writing like
`not vim.version.lt(version_current, {0, 10, 0})` is verbose.
- Solution: add {`le`,`ge`} in addition to {`lt`,`gt`}.
- Also improve typing on the operator methods: allow `string` as well.
- Update the example in `vim.version.range()` docs: `ge` in place of
`gt` better matches the semantics of `range:has`.
Problem: Sharing queries with upstream and Helix is difficult due to
different capture names.
Solution: Define and document a new set of standard captures that
matches tree-sitter "standard captures" (where defined) and is closer to
Helix' Atom-style nested groups.
This is a breaking change for colorschemes that defined highlights based
on the old captures. On the other hand, the default colorscheme now
defines links for all standard captures (not just those used in bundled
queries), improving the out-of-the-box experience.
The motivation for this update is Issue #15365, where background=light
is not properly set for Nvim running from an Nvim :terminal. This can be
encountered when e.g., opening a terminal to make git commits, which
opens EDITOR=nvim in the nested terminal.
Under the implementation of this commit, the OSC response always
indicates a black or white foreground/background. While this may not
reflect the actual foreground/background color, it permits 'background'
to be retained for a nested Nvim instance running in the terminal
emulator. The behaviour matches Vim.
Problem: Current values of `StatusLine` and `StatusLineNC` are currently
designed to be visually distinctive while being not intrusive.
However, the compromise was more shifted towards "not intrusive".
After the feedback, statusline highlight groups should be designed to:
- Make current window clearly noticeable. Meaning `StatusLine` and
`StatusLineNC` should obviously differ.
- Make non-current windows clearly separable. Meaning `StatusLineNC`
and `Normal`/`NormalNC` should obviously differ.
Solution:
- Update `StatusLineNC` to have more visible background.
- Update `StatusLine` to be inverted variant of `StatusLineNC`.
- Update `WinBar` and `WinBarNC` to not link to `StatusLine` and
`StatusLineNC` because it makes two goals harder to achieve.
- Update `TabLine` to link to `StatusLineNC` instead of `StatusLine`
to not be very visually intrusive.
This commit implements a new TermRequest autocommand event and has Neovim
emit this event when children of terminal buffers emit an OSC or DCS sequence
libvterm does not handle.
The TermRequest autocommand event has additional data in the
v:termrequest variable.
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem:
Currently `deepcopy` hashes every single tables it copies so it can be
reused. For tables of mostly unique items that are non recursive, this
hashing is unnecessarily expensive
Solution:
Port the `noref` argument from Vimscripts `deepcopy()`.
The below benchmark demonstrates the results for two extreme cases of
tables of different sizes. One table that uses the same table lots of
times and one with all unique tables.
| test | `noref=false` (ms) | `noref=true` (ms) |
| -------------------- | ------------------ | ----------------- |
| unique tables (50) | 6.59 | 2.62 |
| shared tables (50) | 3.24 | 6.40 |
| unique tables (2000) | 23381.48 | 2884.53 |
| shared tables (2000) | 3505.54 | 14038.80 |
The results are basically the inverse of each other where `noref` is
much more performance on tables with unique fields, and `not noref` is
more performant on tables that reuse fields.
feat(diagnostic): add `vim.diagnostic.count()`
Problem: Getting diagnostic count based on the output of
`vim.diagnostic.get()` might become costly as number of diagnostic
entries grows. This is because it returns a copy of diagnostic cache
entries (so as to not allow users to change them in place).
Getting information about diagnostic count is frequently used in
statusline, so it is important to be as fast as reasonbly possible.
Solution: Add `vim.diagnostic.count()` which computes severity
counts without making copies.
Problem: Unable to predict which byte-offset to place virtual text to
make it repeat visually in the wrapped part of a line.
Solution: Add a flag to nvim_buf_set_extmark() that causes virtual
text to repeat in wrapped lines.
Problem:
Bundled color schemes use `:hi clear` and only define Vim's highlight
groups. This results into Nvim-specific highlight groups using
definitions from Nvim's default color scheme, which are not always
linked to a Vim's highlight group.
Solution:
Restore links to Vim's highlight groups which were present before Nvim's
default color scheme update.
Diagnostic signs should now be configured with vim.diagnostic.config(),
but "legacy" sign definitions should go through the standard deprecation
process to minimize the impact from breaking changes.
Problem: Updating default color scheme produced some feedback.
Solution: Address the feedback.
Outline of the changes:
- Colors `Grey1` and `Grey2` are made a little bit more extreme (dark -
darker, light - lighter) to increase overall contrast.
- `gui` colors are treated as base with `cterm` colors falling back to
using 0-15 colors which come from terminal emulator.
- Update highlight group definition to not include attribute definition
if it is intended to staty uncolored.
- Tweak some specific highlight groups.
- Add a list of Neovim specific highlight groups which are now defined
differently in a breaking way.
- Minor tweaks in several other places related to default color scheme.
Problem: We have `P_(BOOL|NUM|STRING)` macros to represent an option's type, which is redundant because `OptValType` can already do that. The current implementation of option type flags is also too limited to allow adding multitype options in the future.
Solution: Remove `P_(BOOL|NUM|STRING)` and replace it with a new `type_flags` attribute in `vimoption_T`. Also do some groundwork for adding multitype options in the future.
Side-effects: Attempting to set an invalid keycode option (e.g. `set t_foo=123`) no longer gives an error.
Problem:
Unlike termopen(), nvim_open_term() PTYs do not carriage-return the
cursor on newline ("\n") input.
nvim --clean
:let chan_id = nvim_open_term(1, {})
:call chansend(chan_id, ["here", "are", "some", "lines"])
Actual behavior:
here
are
some
lines
Expected behaviour:
here
are
some
lines
Solution:
Add `force_crlf` option, and enable it by default.
* fix garbled item for new treesitter injection format
* add missing item for new `vim.lpeg` and `vim.re`
* use taglinks where possible
* remove redundant "Added" and "Removed" from items
Enable 'termguicolors' automatically when Nvim can detect that truecolor
is supported by the host terminal.
If $COLORTERM is set to "truecolor" or "24bit", or the terminal's
terminfo entry contains capabilities for Tc, RGB, or setrgbf and
setrgbb, then we assume that the terminal supports truecolor. Otherwise,
the terminal is queried (using both XTGETTCAP and SGR + DECRQSS). If the
terminal's response to these queries (if any) indicates that it supports
truecolor, then 'termguicolors' is enabled.
Problem: Default color scheme is suboptimal.
Solution: Start using new color scheme. Introduce new `vim` color scheme
for opt-in backward compatibility.
------
Main design ideas
- Be "Neovim branded".
- Be minimal for 256 colors with a bit more shades for true colors.
- Be accessible through high enough contrast ratios.
- Be suitable for dark and light backgrounds via exchange of dark and
light palettes.
------
Palettes
- Have dark and light variants. Implemented through exporeted
`NvimDark*` and `NvimLight*` hex colors.
- Palettes have 4 shades of grey for UI elements and 6 colors (red,
yellow, green, cyan, blue, magenta).
- Actual values are computed procedurally in Oklch color space based on
a handful of hyperparameters.
- Each color has a 256 colors variant with perceptually closest color.
------
Highlight groups
Use:
- Grey shades for general UI according to their design.
- Bold text for keywords (`Statement` highlight group). This is an
important choice to increase accessibility for people with color
deficiencies, as it doesn't rely on actual color.
- Green for strings, `DiffAdd` (as background), `DiagnosticOk`, and some
minor text UI elements.
- Cyan as main syntax color, i.e. for function usage (`Function`
highlight group), `DiffText`, `DiagnosticInfo`, and some minor text UI
elements.
- Red to generally mean high user attention, i.e. errors; in particular
for `ErrorMsg`, `DiffDelete`, `DiagnosticError`.
- Yellow very sparingly only with true colors to mean mild user
attention, i.e. warnings. That is, `DiagnosticWarn` and `WarningMsg`.
- Blue very sparingly only with true colors as `DiagnosticHint` and some
additional important syntax group (like `Identifier`).
- Magenta very carefully (if at all).
------
Notes
- To make tests work without relatively larege updates, each one is
prepended with an equivalent of the call `:colorscheme vim`.
Plus some tests which spawn new Neovim instances also now use 'vim'
color scheme.
In some cases tests are updated to fit new default color scheme.
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Use the XTGETTCAP sequence to determine if the host terminal supports
the OSC 52 sequence and, if it does, enable the OSC 52 clipboard
provider by default.
This is only done automatically when all of the following are true:
1. Nvim is running in the TUI
2. 'clipboard' is not set to unnamed or unnamedplus
3. g:clipboard is unset
4. Nvim is running in an SSH connection ($SSH_TTY is set)
5. Nvim is not running inside tmux ($TMUX is unset)
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
Problem: No way to have extmarks automatically removed when the range it
is attached to is deleted.
Solution: Add new 'invalidate' property that will hide a mark when the
entirety of its range is deleted. When "undo_restore" is set
to false, delete the mark from the buffer instead.
When the terminal emulator sends an OSC sequence to Nvim (as a response
to another OSC sequence that was first sent by Nvim), populate the OSC
sequence in the v:termresponse variable and fire the TermResponse event.
The escape sequence is also included in the "data" field of the
autocommand callback when the autocommand is defined in Lua.
This makes use of the already documented but unimplemented TermResponse
event. This event exists in Vim but is only fired when Vim receives a
primary device attributes response.
Fixes: https://github.com/neovim/neovim/issues/25856
It is a design goal of extmarks that they allow precise tracking
of changes across undo/redo, including restore the exact positions
after a do/undo or undo/redo cycle. However this behavior is not useful
for all usecases. Many plugins won't keep marks around for long after
text changes, but uses them more like a cache until some external source
(like LSP semantic highlights) has fully updated to changed text and
then will explicitly readjust/replace extmarks as needed.
Add a "undo_restore" flag which is true by default (matches existing
behavior) but can be set to false to opt-out of this behavior.
Delete dead u_extmark_set() code.
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
Problem:
NVIM_APPNAME does not allow path separators in the name, so relative
paths can't be used:
NVIM_APPNAME="neovim-configs/first-config" nvim
NVIM_APPNAME="neovim-configs/second-config" nvim
Solution:
Let NVIM_APPNAME be a relative path. Absolute paths are not supported.
fix#23056fix#24966
A lot of updated places in the docs were already incorrect since long
since they did not reflect the default behaviour.
"[dos format]" could've been argued being better for discoverability
but that ship has already sailed as it is no longer displayed by default.
Not everything needs to be crazy overconfigurable.
Also fixes a warning in latest clang which didn't approve of
the funky math switch statement in append_arg_number
The name for_each_child is misleading and caused bugs.
After #25111, #25115, there are no more usages of `for_each_child` in Nvim.
In the future if we want to restore this functionality we can consider a
generalized vim.traverse(node, key, visitor) function.
The removes the previous restriction that nvim_buf_set_extmark()
could not be used to highlight arbitrary multi-line regions
The problem can be summarized as follows: let's assume an extmark with a
hl_group is placed covering the region (5,0) to (50,0) Now, consider
what happens if nvim needs to redraw a window covering the lines 20-30.
It needs to be able to ask the marktree what extmarks cover this region,
even if they don't begin or end here.
Therefore the marktree needs to be augmented with the information covers
a point, not just what marks begin or end there. To do this, we augment
each node with a field "intersect" which is a set the ids of the
marks which overlap this node, but only if it is not part of the set of
any parent. This ensures the number of nodes that need to be explicitly
marked grows only logarithmically with the total number of explicitly
nodes (and thus the number of of overlapping marks).
Thus we can quickly iterate all marks which overlaps any query position
by looking up what leaf node contains that position. Then we only need
to consider all "start" marks within that leaf node, and the "intersect"
set of that node and all its parents.
Now, and the major source of complexity is that the tree restructuring
operations (to ensure that each node has T-1 <= size <= 2*T-1) also need
to update these sets. If a full inner node is split in two, one of the
new parents might start to completely overlap some ranges and its ids
will need to be moved from its children's sets to its own set.
Similarly, if two undersized nodes gets joined into one, it might no
longer completely overlap some ranges, and now the children which do
needs to have the have the ids in its set instead. And then there are
the pivots! Yes the pivot operations when a child gets moved from one
parent to another.
Problem: Now way to show text at the bottom part of floating window
border (a.k.a. "footer").
Solution: Allows `footer` and `footer_pos` config fields similar to
`title` and `title_pos`.
Problem:
Treesitter highlighting is slow for large files with lots of injections.
Solution:
Only parse injections we are going to render during a redraw cycle.
---
- `LanguageTree:parse()` will no longer parse injections by default and
now requires an explicit range argument to be passed.
- `TSHighlighter` now parses injections incrementally during on_win
callbacks for the line range being rendered.
- Plugins which require certain injections to be parsed must run
`parser:parse({ start_row, end_row })` before using the tree.
* feat(treesitter): add injection language fallback
Problem: injection languages are often specified via aliases (e.g.,
filetype or in upper case), requiring custom directives.
Solution: include lookup logic (try as parser name, then filetype, then
lowercase) in LanguageTree itself and remove `#inject-language`
directive.
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem:
Nvim docs use "•" as a list item prefix but `gw{motion}` doesn't format
such lists by default.
Solution:
Change the 'comments' option to include "fb:•" by default.
