Problem: #25716 removed the logic for getting the correct value of the `'modified'` option when using `nvim_buf_get_option()`. So the function now returns an incorrect value of `'modified'` for scratch buffers.
Solution: Re-add the logic for getting the correct value of `'modified'`. Also make it so that the logic only exists in one place instead of being duplicated across multiple places in the code.
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: vim/vim#13396a36acb7ac4
matchparen: do not use hard-coded match id (vim/vim#13393)
* matchparen: do not use hard-coded match id
Instead of using the hard-coded match id 3, which may also be used by
other plugins, let the matchparen plugin use whatever ids are
automatically returned when calling matchaddpos().
For backwards-compatibility, keep the `:3match` call, which will still
use the hard-coded id 3 (as mentioned in :h :3match).
closes: vim/vim#13381d3e277f279
Co-authored-by: Christian Brabandt <cb@256bit.org>
To be more in line with the specification:
> To support the evolution of enumerations the using side of an enumeration shouldn’t fail on an enumeration value it doesn’t know. It should simply ignore it as a value it can use and try to do its best to preserve the value on round trips
Problem: With lots of events, UI flush may be delayed for too long.
Solution: Flush UI when no input is available. This still flushes less
frequently than before #25629, when a flush also happens when
typeahead buffer is empty but input is available.
`SREQ_*` values are now actual typedef'd enums. `get_option_value_strict()` has also been refactored and split into two functions, `get_option_attrs()` for getting the option attributes, and `get_option_value_strict()` for getting the actual value. Moreover, it now returns an `OptVal`. Other miscellaneous refactors have also been made.
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: vim/vim#1338047416d1a74
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: vim/vim#13389a8c664a042
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: vim/vim#13376closes: vim/vim#13377c59c1e0d88
The change in check_due_timer() is N/A as Nvim calls timer callbacks on
the main loop.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Now that all the Find<Foo>.cmake modules are using our custom
find_path2, the bundled deps build needs to include the Find module so
it has access to find_path2.
The missing include was causing the PPA build to fail:
```
cd .deps && \
cmake -G 'Unix Makefiles' \
-DUSE_EXISTING_SRC_DIR=ON -DUSE_BUNDLED_LUAROCKS=OFF -DUSE_BUNDLED_LUAJIT=OFF -DUSE_BUNDLED_GPERF=OFF -DUSE_BUNDLED_LUA=OFF /<<PKGBUILDDIR>>//cmake.deps
-- The C compiler identification is GNU 7.5.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Found GNU Make at /usr/bin/make
-- CMAKE_BUILD_TYPE not specified, default is 'Debug'
-- Performing Test HAS_OG_FLAG
-- Performing Test HAS_OG_FLAG - Success
-- Found Git: /usr/bin/git (found version "2.17.1")
CMake Error at /<<PKGBUILDDIR>>/cmake/FindLuajit.cmake:1 (find_path2):
Unknown CMake command "find_path2".
Call Stack (most recent call first):
cmake/BuildLuv.cmake:13 (find_package)
CMakeLists.txt:127 (include)
-- Configuring incomplete, errors occurred!
```
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: vim/vim#13371a0e1f06f04
runtime(json5): include syntax script for json5 (vim/vim#13356)
Merging syntax file from gutenye/json5.vim, modified to include proper
vim header.
See: https://github.com/vim/vim/issues/84995a33ce2a66
Co-authored-by: Rolf Vidar Mazunki Hoksaas <32819373+mazunki@users.noreply.github.com>
Co-authored-by: Guten Ye <ywzhaifei@gmail.com>
Problem: Wrong color for half of wide character next to pum scrollbar.
Solution: Redraw the screen cell with the right color. (closesvim/vim#9874)
35d8c2010e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: completion shows current word after completion restart
Solution: remove the word being completed after completion restart
The word being completed is shown in a completion list after completion
restart, because it isn't removed from the current buffer before
searching for matches.
Also adjust `Test_complete_add_onechar` to match the new behavior.
closes: vim/vim#133492e3cd52fa0
Co-authored-by: nwounkn <nwounkn@gmail.com>
Problem:
When enabling diagnostics, there can be diagnostics for unloaded buffer,
but some handlers nevertheless attempt to set extmarks in such buffers.
Solution:
* Exit underline/virtual_text handler if buffer is not loaded.
* Don't require is_loaded as precondition for show(), because handlers
don't necessarily depend on it.
Ensure bundled libraries and include directories are always searched
first before any others. This will provide a more consistent experience
as the search order of the builtin find_ functions can vary depending on
system. This should make the build process faster when building with
bundled deps as we limit the search to only the .deps directory.
Separating the search between .deps and everything makes debugging
find_-related problems simpler if you need to check how dependencies are
found.
For libraries, we divide the search process into the following order:
1. Only search in .deps directory and only search for static libraries.
2. Only search in .deps directory and search for all libraries.
3. Search everywhere and search for all libraries.
Make an exception for FindLibintl.cmake as changing the search order
seems to break some tests on macos.
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem:
If a manpage is opened, its hardwrapped dimensions are not recalculated
after closing then revisiting the same manpage.
Solution:
Unload the manpage when it is hidden. This forces it to be reloaded,
which forces the hard-wrapping to be recalculated when it is revisited.
Fixes: #25457
