Problem: Heredoc assignment has no room for new features. (FUJIWARA Takuya)
Solution: Require the marker does not start with a lower case character.
(closesvim/vim#4705)
2458200729
Problem: :let-heredoc does not trim enough.
Solution: Trim indent from the contents based on the indent of the first
line. Use let-heredoc in more tests.
e7eb92708e
Problem: :digraph output is not easy to read.
Solution: Add highlighting for :digraphs. (Marcin Szamotulski, closesvim/vim#3572)
Also add section headers for :digraphs!.
eae8ae1b2b
The Python provider was special (via [1]), and would continue to do
checks with `0` being set explicitly even.
This was fixed in #11044 (45447e3b6), ref: #11040.
This extends it to use the same method with all providers.
1: https://github.com/neovim/neovim/pull/8047
Problem: wrong error message if "termdebugger" is not executable.
Solution: Check if "termdebugger" is executable and give a clear error
message. (Ozaki Kiichi, closesvim/vim#5000) Fix indents.
18223a592e
Problem: CTRL-W ^ does not work when alternate buffer has no name.
Solution: Use another method to split and edit the alternate buffer. (Jason
Franklin)
1bbb619483
This reverts part of ade88fe4c [1].
This is required for `let g:python3_host_prog = 'python'` etc, where it
should get picked up from PATH.
Without this it would show:
```
- INFO: pyenv: Path: /home/user/.pyenv/libexec/pyenv
- INFO: pyenv: Root: /home/user/.pyenv
- INFO: Using: g:python3_host_prog = "python"
- ERROR: "python" was not found.
- INFO: Executable: Not found
- ERROR: Detected pip upgrade failure: Python executable can import "pynvim" but not "neovim": python
- ADVICE:
- Use that Python version to reinstall "pynvim" and optionally "neovim".
pip3 uninstall pynvim neovim
pip3 install pynvim
pip3 install neovim # only if needed by third-party software
```
Note that it additionally causes a weird error
("Detected pip upgrade failure"), due to `s:check_bin` emptying
`python_exe` (because the non-absolute file not being readable), and
`provider#pythonx#DetectByModule('pynvim', a:version)` from 75593e6fce
then just getting the value from the host var again (without actual
checks).
This is implicitly fixed via this patch now (because it is skipped), but
could need some improvement in this regard probably.
With this patch it resolves it (for a virtualenv where pynvim is not
made available intentionally):
```
- INFO: pyenv: Path: /home/daniel/.pyenv/libexec/pyenv
- INFO: pyenv: Root: /home/daniel/.pyenv
- INFO: Using: g:python3_host_prog = "python"
- WARNING: $VIRTUAL_ENV exists but appears to be inactive. This could lead to unexpected results.
- ADVICE:
- If you are using Zsh, see: http://vi.stackexchange.com/a/7654
- INFO: Executable: /home/daniel/.pyenv/shims/tmp-system-deoplete.nvim-f205aF/python
- ERROR: Command error (job=11, exit code 1): `'/home/daniel/.pyenv/shims/tmp-system-deoplete.nvim-f205aF/python' -c 'import sys; sys.path.remove(""); import neovim; print(neovim.__file__)'` (in '/home/daniel/.dotfiles/vim/plugged/deoplete.nvim')
Output: Traceback (most recent call last): File "<string>", line 1, in <module>ModuleNotFoundError: No module named 'neovim'
Stderr: Traceback (most recent call last): File "<string>", line 1, in <module>ModuleNotFoundError: No module named 'neovim'
- INFO: Python version: 3.7.4
- INFO: pynvim version: unable to load neovim Python module
- ERROR: pynvim is not installed.
Error: unable to load neovim Python module
- ADVICE:
- Run in shell: pip3 install pynvim
```
Note: this appears to display the error twice via "Output:" and
"Stderr:".
1: https://github.com/neovim/neovim/pull/8784
Previously, the "precedes" character would be rendered on every row
when w_skipcol > 0 (i.e., when viewing a single line longer than the
entire screen), instead of just on the first row. Make sure to only
render it on the first row in this case.
Add a test for this behavior.
Fix documentation for the "precedes" character, which erroneously
stated that it was only active when wrap mode was off.
Problem: "make test" for indent files doesn't cause make to fail.
Solution: Exit the script with ":cquit". (Daniel Hahler, closesvim/vim#4949)
cd67059c0c
Problem: "make clean" in top dir does not cleanup indent test output.
Solution: Clean the indent test output. Do not rely on the vim executable
for that. (closesvim/vim#4307)
e13a3901ca
(Port some refactoring, but ignore "balloon" changes.)
Problem: Cannot use 'balloonexpr' in a terminal.
Solution: Add 'balloonevalterm' and add code to handle mouse movements in a
terminal. Initial implementation for Unix with GUI.
51b0f3701e
N/A:
vim-patch:8.0.0941: existing color schemes don't like StatusLineTerm
vim-patch:8.0.0937: user highlight groups not adjusted for terminal
vim-patch:8.0.0825: not easy to see that a window is a terminal window
Forcing insert-mode after the first paste-chunk seems to work, as an
alternative to a9e2bae0eb (insert-before-cursor).
NB: Dot-repeat needs to match the original action. Since a9e2bae0eb
changed paste to insert-before-cursor, dot-repeat must also. But that
makes dot-repeat unpleasant/unusual.
Inserting "after" the cursor in Normal-mode, for big paste-streams, is
not reliable: sometimes the text "after" the cursor ends up in the
middle of the pasted text. Maybe the cursor position is not updated?
To avoid weird behavior, always paste "before". Maybe nvim_put() or
vim.paste() can be fixed more properly later.
- Rename `meth_pcall`.
- Make `pcall_err` raise an error if the function does not fail.
- Add `vim.pesc()` to treat a string as literal where a Lua pattern is
expected.
- line numbers weren't hidden (which means the variable is cut off, as the number column isn't considered when calculating the width of the float).
- spurious duplicate line to disable signcolumn, and nonumber was indeed missed when porting the original implementation to Neovim.
Problem: ":write" increments b:changedtick even though nothing changed.
(Daniel Hahler)
Solution: Only increment b:changedtick if the modified flag is reset.
c024b46678
Problem: Cannot get the script line number when executing a function.
Solution: Store the line number besides the script ID. (Ozaki Kiichi,
closesvim/vim#3362) Also display the line number with ":verbose set".
f29c1c6aa3
Problem: If a job exits while waiting on another job, the on_exit
handler is queued but f_jobwait() skips it.
Solution: Always do process_wait(), so that handlers are run during
f_jobwait().
fix#8302
Test case:
$ BUSTED_ARGS="--repeat=2000 --no-keep-going" TEST_FILE=test/functional/core/job_spec.lua TEST_FILTER=waiting make functionaltest
Failure example (macOS CI):
FAILED test/functional/core/job_spec.lua: jobs jobwait will run callbacks while waiting
test/functional/core/job_spec.lua:606: Expected objects to be the same.
Passed in:
(table: 0x1be77c80) {
[1] = 'notification'
[2] = 'wait'
*[3] = {
*[1] = 3 } }
Expected:
(table: 0x1be77d10) {
[1] = 'notification'
[2] = 'wait'
*[3] = {
*[1] = 4 } }
stack traceback:
test/functional/core/job_spec.lua:606: in function <test/functional/core/job_spec.lua:583
- All "chunks" in a paste-stream should form a single undo-block. Side
effect of 7a85792884 was to create an undo-block for each chunk.
- Also: remove old :redraw force logic, irrelevant after 7a85792884.
add proper msg_set_pos event, delet win_scroll_over_*
make compositor click through unfocusable grids
add MsgArea attribute for the message/cmdline area, and add docs and tests
Problem: json_encode() does not handle NaN and inf properly. (David
Barnett)
Solution: For JSON turn them into "null". For JS use "NaN" and "Infinity".
Add isnan().
f1b6ac7229
Problem: There is no easy way to manipulate environment variables.
Solution: Add environ(), getenv() and setenv(). (Yasuhiro Matsumoto,
closesvim/vim#2875)
691ddeefb5
Instead of deciding provider status in eval_has_provider, move the
decision to the provider Vim scripts.
Previously, provider loading worked as follows:
1. eval_has_provider() verified provider availability by searching for
the provider#providername#Call function and cached this verificaion as a static
variable for some providers
2. providers short-circuited on loading to prevent the definition of the
Call function (with the exception of the node provider that did not)
This commit changes the expected interface between nvim and its
providers to facilitate provider reloading, by splitting the
verification of the provider from the availability of the Call function.
eval_has_provider() now checks for a provider#providername#enabled
variable. It is up to the provider script to set this to 0 or 1
accordingly. eval_call_provider() remains unchanged.
All providers hosting a Call function were updated to respect this.
The clipboard provider now has a Reload function to reload the
provider.
Encoding can be utf8, unicode, utf32.
User can choose to omit '-Encoding' to default to 'unicode'.
'ascii' encoding corrupts the following file:
https://www.w3.org/2001/06/utf-8-test/UTF-8-demo.html
Inspect 'foo.txt' with the following code after downloading the file.
Get-Content -Encoding UTF8 UTF-8-demo.html | Out-File -Encoding ascii foo.txt
Align matchit.vim with upstream Vim. We don't want to maintain a fork of
matchit.vim; our small changes should be sent to
https://github.com/chrisbra/matchit
