**Problem:**
The brackets in the RFC2732 regular expression are currently unescaped,
causing them to be misinterpreted as special characters denoting
character groups rather than as literal characters.
**Solution:**
Escape the brackets.
Fix#31270
Problem: Float preview window still exist when back at original.
Or no info item is selected.
Solution: if selected is -1 or no info is selected, if float preview
window exist close it first.
**Problem:** Currently, it is difficult to get node(s)-level metadata
for a capture returned by `get_captures_at_pos()`. This is because it is
stored in `metadata[id]` and we do not have access to the value of `id`,
so to get this value we have to iterate over the keys of `metadata`. See
[this commit](d636229300 (diff-8bd4742121c2f359d0345f3c6c253a58220f1a28670cc4e1c957992232059a6cR16)).
Things would be much simpler if we were given the `id` of the capture so
we could use it to just index `metadata` directly.
**Solution:** Include `id` in the data returned by
`get_captures_at_pos()`
Design goals/requirements:
- Default configuration of a server can be distributed across multiple sources.
- And via RTP discovery.
- Default configuration can be specified for all servers.
- Configuration _can_ be project specific.
Solution:
- Two new API's:
- `vim.lsp.config(name, cfg)`:
- Used to define default configurations for servers of name.
- Can be used like a table or called as a function.
- Use `vim.lsp.confg('*', cfg)` to specify default config for all
servers.
- `vim.lsp.enable(name)`
- Used to enable servers of name. Uses configuration defined
via `vim.lsp.config()`.
- Problem: cannot replace the initial bufwrite message (from `filemess`) by the final one (`"test.lua" [New] 0L, 0B written`), when using `vim.ui_attach`.
- Solution: add kind to both messages.
Problem: :sleep! not hiding the cursor is an arbitrary difference from
Vim without obvious justification, and Vim's behavior isn't
easily achievable in Nvim.
Solution: Make :sleep! hide the cursor while sleeping.
Ref:
6a01b3fcc3b5c0ade437
Problem:
char-wise folding for `#trim!` ranges are improperly calculated for nodes that
end at column 0, due to the way `get_node_text` works.
Solution:
Add the blank line that `get_node_text` removes for for nodes ending at column
0. Also properly set column positions when performing linewise trims.
Problem:
vim.json.encode escapes every slash in string values (for example in
file paths), and is not optional. Use-case is for preventing HTML
injections (eg. injecting `</script>` closing tag); in the context of
Nvim this is rarely useful.
Solution:
- Add a `escape_slash` flag to `vim.json.encode`.
- Defaults to `false`. (This is a "breaking" change, but more like
a bug fix.)
This commit also implements more generic trimming, acting on all
whitespace (charwise) rather than just empty lines.
It will unblock
https://github.com/nvim-treesitter/nvim-treesitter/pull/3442 and allow
for properly concealing markdown bullet markers regardless of indent
width, e.g.
Problem: When completion leader changes, text that might be reinserted
immediately after is deleted. This unnecessarily affects
extmarks. #31387 restored the original extmarks but that
prevents end_right_gravity marks from growing.
Solution: Avoid deleting leader text that will be reinserted.
Problem: In an autocommand Lua callback whether `args.file` is expanded
depends on whether `expand('<afile>')` has been called.
Solution: Always use the unexpanded file name for `args.file`.
Related to #31306 and vim/vim#16106. This doesn't provide `sfname`, but
at least makes `args.file` have a consistent value.
Problem: Marks that are properly restored by the splice associated with
an undo edit, are unnecessarily pushed to the undo header. This
results in incorrect mark tracking in the "copy_only"
save/restore completion path.
Solution: Avoid pushing left gravity marks at the beginning of the range,
and right gravity marks at the end of the range to the undo
header.
In release builds, the Compilation: line is omitted so the build is reproducible. Since the "fall-back for $VIM" line is always present, check for that instead.
Problem:
- nvim_subscribe, nvim_unsubscribe were deprecated in
aec4938a21 but this wasn't set in the
API metadata.
- The function annotations
```
FUNC_API_SINCE(1) FUNC_API_REMOTE_ONLY FUNC_API_DEPRECATED_SINCE(13)
```
cause this test to fail:
```
RUN T3 api metadata functions are compatible with old metadata or have new level: 3.00 ms ERR
test/functional/api/version_spec.lua:135: function vim_subscribe was removed but exists in level 0 which nvim should be compatible with
stack traceback:
test/functional/api/version_spec.lua:135: in function <test/functional/api/version_spec.lua:128>
```
Solution:
- Set the API metadata.
- Rearrange the annotations so that FUNC_API_DEPRECATED_SINCE is 2nd:
```
FUNC_API_SINCE(1) FUNC_API_DEPRECATED_SINCE(13) FUNC_API_REMOTE_ONLY
```
* refactor(shared): extract `vim._list_insert` and `vim._list_remove`
* feat(lsp): add `vim.lsp.foldexpr()`
* docs(lsp): add a todo for state management
* feat(lsp): add `vim.lsp.folding_range.foldclose()`
* feat(lsp): schedule `foldclose()` if the buffer is not up-to-date
* feat(lsp): add `vim.lsp.foldtext()`
* feat(lsp): support multiple folding range providers
* refactor(lsp): expose all folding related functions under `vim.lsp.*`
* perf(lsp): add `lsp.MultiHandler` for do `foldupdate()` only once
Problem: %! item not allowed for 'rulerformat'
(yatinlala)
Solution: also allow to use %! for rulerformat option
(Yegappan Lakshmanan)
fixes: vim/vim#16091closes: vim/vim#16118ac023e8baa
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem:
`vim.loader.disable` does not conform to `:help dev-name-common` and
`:help dev-patterns`.
Solution:
- Add `enable` parameter to `vim.loader.enable`
- Remove `vim.loader.disable`
- Note the change in `:help news-breaking-dev` (HEAD changes).
- This is not a breaking change (except to "HEAD") because
`vim.loader` is marked "experimental".
previous: 26765e8461
Problem:
The default unimpaired mappings display an empty line after the
command's output. This results (with default configuration) in the
`Press ENTER or type command to continue` prompt to be displayed, like
so:
```
(2 of 16): item2
Press ENTER or type command to continue
```
Solution:
The cause is that we're checking the second return value from
`pcall(vim.api.nvim_cmd, opts, {})` to determine whether the call was
successful. `nvim_cmd` returns an empty string on success, so this value
is an empty string in the successful path which we then display.
The fix is simple: check the first return value instead which is the
"status code" of the call.
Problem:
LSP spec uses the term "position encoding" where we say "offset encoding".
Solution:
- Rename it everywhere except `vim.lsp.Client.offset_encoding` (which would be breaking).
- Mention "position encoding" in the documentation for `vim.lsp.Client.offset_encoding`.
Problem: Hit double grid_line_start() assert when redrawing from
ext_messages msg_ruler event.
Solution: Do not start() batched grid calls when win_redr_ruler() will not
puts() anything.
Problem: floaing preview window can be closed by some
ex commands like `only` `fclose` which will not clean the bufvar
Solution: use WinClosed event with floating_winnr for clean
bufnr, and add test cases for vim.lsp.util.open_floating_preview
Problem:
`validate_option_value_args()` returns `OK` even if option name is
invalid or if option doesn't have the supported scope, which leads to
Neovim still trying to erroneously get/set the option in those cases,
which can lead to an assertion failure when `option_has_scope()` is
invoked. This issue miraculously doesn't exist in release builds since
the assertion is skipped and `(get/set)_option_value_for` returns if
there is an error set, but that is not the intended location for that
error to be caught.
Solution:
Make `validate_option_value_args()` return `FAIL` if there is an error
set, which causes the API option functions to return early instead of
trying to get/set an invalid option.
