Problem: 'shortmess' "F" flag doesn't work properly with 'autoread'
(after 9.1.0154)
Solution: Hide the file info message instead of the warning dialog
(zeertzjq)
closes: vim/vim#14159closes: vim/vim#141588a01744c56
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: vim/vim#141540df8f93bda
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: vim/vim#1413184bf6e658d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: v:echospace wrong after setting invalid value to 'showcmdloc'.
Solution: Only call comp_col() if value is valid.
(zeertzjq)
closes: vim/vim#14119c27fcf4857
Problem: the amount of available space (v:echospace) on the command
line is not correct when showcmdloc is drawn into the
statusline or tabline.
Solution: only add SHOWCMD_COLS to the shown command column when
'showcmdloc' is set to last (Sam-programs)
closes: vim/vim#14108062141b1a7
Co-authored-by: Sam-programs <130783534+Sam-programs@users.noreply.github.com>
Problem: getregion() needs more tests
Solution: Run the getregion() test in both the legacy and Vim9 contexts
(Yegappan Lakshmanan)
closes: vim/vim#141144d55c54e30
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: [security]: autocmd cause use-after-free in set_curbuf()
(kawarimidoll)
Solution: check side-effect of BufLeave autocommand, when the number
of windows changed, close windows containing buffers that will
be wiped, if curbuf changed unexpectedly make sure b_nwindows
is decremented otherwise it cannot be wiped
set_curbuf() already makes some efforts to ensure the BufLeave
autocommands do not cause issues. However there are still 2 issues
that are not taken care of:
1) If a BufLeave autocommand opens a new window containing the same
buffer as that is going got be closed in close_buffer() a bit later,
we suddenly have another window open, containing a free'd buffer. So we
must check if the number of windows changed and if it does (and the
current buffer is going to be wiped (according to the 'bufhidden'
setting), let's immediately close all windows containing the current
buffer using close_windows()
2) If a BufLeave autocommand changes our current buffer (displays it in
the current window), buf->b_nwindow will be incremented. As part of
set_curbuf() we will however enter another buffer soon, which means, the
newly created curbuf will have b_nwindows still have set, even so the
buffer is no longer displayed in a window. This causes later problems,
because it will no longer be possible to wipe such a buffer. So just
before entering the final buffer, check if the curbuf changed when
calling the BufLeave autocommand and if it does (and curbuf is still
valid), decrement curbuf->b_nwindows.
Both issues can be verified using the provided test (however the second
issue only because such an impacted buffer won't be wiped, causing
futher issues in later tests).
fixes: vim/vim#13839closes: vim/vim#1410455f8bba73b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: vim/vim#1409019b718828d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Put in Visual mode wrong if it replaces fold marker.
Solution: Temporarily disable folding during put in Visual mode.
(zeertzjq)
fixes: vim/vim#14097closes: vim/vim#141004e141c66b9
Problem: Insufficient testing for 'delcombine'.
Solution: Add test for both Normal and Insert modes without Arabic.
(zeertzjq)
closes: vim/vim#14086cd3a13e774
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
fixesvim/vim#13894closes: vim/vim#140820dc0bff000
Cherry-pick test_cmdline.vim from patch 9.1.0019 as it already passes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: using "C" and 've=all' set, doesn't include composing chars
when changing a line, keeps the composing chars for whatever
is typed afterwards.
Solution: Use mb_head_off() and mb_ptr2len() instead of mb_tail_off().
(zeertzjq)
closes: vim/vim#14083048761bcd4
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: vim/vim#14076
Internal error when passing mark in another buffer to getregion()
421b597470
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: vim/vim#13998closes: vim/vim#115793f905ab3c4
Cherry-pick changes from patch 9.1.0122, with :echom instead of :echow.
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Jakub Łuczyński <doubleloop@o2.pl>
runtime(filetype): Modula-2 files with priority not detected (vim/vim#14055)
Problem: Modula-2 files with a specified priority are not detected.
Solution: Match the priority syntax in module header lines when
performing heuristic content detection.
Disable the :defcompile debug line. This was accidentally left enabled
in commit 68a8947.
ef387c062b
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: Using freed memory with full tag stack and user data
(Konstantin Khlebnikov)
Solution: Clear the user data pointer of the newest entry.
(zeertzjq, Konstantin Khlebnikov)
fixes: neovim/neovim#27498closes: vim/vim#14053c86bff1771
Cherry-pick Test_tag_stack() changes from patch 9.0.0767.
Co-authored-by: Konstantin Khlebnikov <koct9i@gmail.com>
Problem: Setting some options changes curswant unnecessarily.
Solution: Add a P_HLONLY flag that prevents changing curswant.
(zeertzjq)
closes: vim/vim#14044fcaed6a70f
Problem: When the quickfix buffer has been modified an autocommand
may invalidate the undo stack (kawarimidoll)
Solution: When clearing the quickfix buffer, also wipe the undo stack
fixes: vim/vim#13905closes: vim/vim#13928f0d3d4a426
Co-authored-by: Christian Brabandt <cb@256bit.org>
The '*.bats' file type is for Bash Automated Testing System (BATS)
scripts. BATS scripts are Bash with a special '@test' extension but they
otherwise work with Vim's bash filetype.
See https://github.com/bats-core/bats-corecloses: vim/vim#14039d00fb4b3a2
Co-authored-by: Brandon Maier <brandon.maier@collins.com>
The 'Config.in' file type is for Buildroot configuration files.
Buildroot Config.in files use the same Kconfig backend as the Linux
kernel's Kconfig files.
Buildroot also has other filename variants that follow "Config.in.*",
they are used to distinguish multiple Config.in files in the same
directory.
See https://buildroot.org/downloads/manual/manual.html#_literal_config_in_literal_filecloses: vim/vim#140385f20f050ef
Co-authored-by: Brandon Maier <brandon.maier@collins.com>
Problem: filetype: no support for dtso files
Solution: Add detection for *.dtso files as dts file type
(Markus Schneider-Pargmann)
*.dtso files are devicetree overlay files which have the same syntax as dts or dtsi files.
closes: vim/vim#14026b1700fb33f
Co-authored-by: Markus Schneider-Pargmann <msp@baylibre.com>
Problem: upper-case of ß should be U+1E9E (CAPITAL LETTER SHARP S)
(fenuks)
Solution: Make gU, ~ and g~ convert the U+00DF LATIN SMALL LETTER SHARP S (ß)
to U+1E9E LATIN CAPITAL LETTER SHARP S (ẞ), update tests
(glepnir)
This is part of Unicode 5.1.0 from April 2008, so should be fairly safe
to use now and since 2017 is part of the German standard orthography,
according to Wikipedia:
https://en.wikipedia.org/wiki/Capital_%E1%BA%9E#cite_note-auto-12
There is however one exception: UnicodeData.txt for U+00DF
LATIN SMALL LETTER SHARP S does NOT define U+1E9E LATIN CAPITAL LETTER
SHARP S as its upper case version. Therefore, toupper() won't be able
to convert from lower sharp s to upper case sharp s (the other way
around however works, since U+00DF is considered the lower case
character of U+1E9E and therefore tolower() works correctly for the
upper case version).
fixes: vim/vim#5573closes: vim/vim#14018bd1232a1fa
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: 'breakindentopt' "min" works incorrectly with 'signcolumn'.
Solution: Use win_col_off() and win_col_off2().
(zeertzjq)
closes: vim/vim#14014f0a9d65e0a
Problem: CompleteChanged not triggered when new leader added causing
no matching item in the completion menu
Solution: When completion is active but no items matched still trigger
CompleteChanged event
(glepnir)
closes: vim/vim#139820d3c0a66a3Fix#15077
Problem: 'breakindent' behaves inconsistently with 'list' and splits.
Solution: Use 'listchars' from the correct window and handle caching
properly. Move cheaper comparisons to the top.
(zeertzjq)
closes: vim/vim#14008efabd7c8d4
When "q" is set in 'shortmess' it now fully hides the "recording @a" message
when you are recording a macro instead of just shortening to "recording". This
removes duplication when using reg_recording() in the statusline.
Related #19193
Problem: Restore lastused_tabpage too early in do_arg_all() function it
will change later in the function.
Solution: Restore lastused_tabpage a bit later, when being done with
tabpages (glepnir)
closes: vim/vim#139922975a54f28
Problem: TextChanged not triggered for :norm! commands
(machakann, after v9.0.2031)
Solution: Only reset curbuf->b_last_changedtick if TextChangedI
was triggered in insert mode (and not blocked)
Note: for unknown reasons, the test fails on Windows (but seems to work
fine when running interactively)
fixes: vim/vim#13967closes: vim/vim#13984c9e79e5284
Cherry-pick test_autocmd.vim change from patch 8.2.4149.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Visual hl wrong when it ends before multibyte 'showbreak'.
(lacygoil)
Solution: Use vcol_sbr instead of adding n_extra.
(zeertzjq)
fixes: vim/vim#11272closes: vim/vim#13996df23d7f4bd
Bug doesn't apply to Nvim.
Problem: Redrawing can be improved when inserting/deleting lines with 'number'.
Solution: Only redraw the number column of lines below changed lines.
Add a test as this wasn't previously tested.
(zeertzjq)
closes: vim/vim#13985ae07ebc04b
Problem: Redrawing can be improved when deleting lines with 'cursorline'.
Solution: Use smarter invalidation and adjustment. Remove unnecessary
UPD_VALID as it is already set at the top of the loop. Make
the test for vim/vim#4862 fail without the fix.
(zeertzjq)
closes: vim/vim#139867ce34c9a94
Problem: LineNrAbove and LineNrBelow background wrong on wrapped lines.
Solution: Update number column also for wrapped part of a line.
(zeertzjq)
closes: vim/vim#13974ebfd856cfd
Cherry-pick test_number.vim changes from patch 9.0.0626.
Problem: insert completion not correct when adding new leader
Solution: Reset compl_curr_match to compl_shown_match
(glepnir)
closes: vim/vim#13957cbb46b4398
- Consistently use the variable CMAKE_BUILD_TYPE to select build type.
- Remove broken `doc_html` target.
- Remove swap files created by oldtest when cleaning.
- Only rerun `lintdoc` if any documentation files has changed.
Problem: Crash when using gettabwinvar() with invalid arguments. (Yilin
Yang)
Solution: Use "curtab" if "tp" is NULL. (closesvim/vim#5475)
ee93b737aa
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Segfault with CompleteChanged autocommand
(markonm )
Solution: Test match->cp_prev for being NULL before accessing it
closes: vim/vim#13929fef6630166
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Recorded register cannot be translated using keytrans() when
it involves character search (iddqd505)
Solution: Record a K_IGNORE instead of a K_NOP (zeertzjq)
related: vim/vim#13916closes: vim/vim#13925bf321806bf
Problem: E95 is possible if a buffer called "[Command Line]" already
exists when opening the cmdwin. This can also happen if the
cmdwin's buffer could not be deleted when closing.
Solution: Un-name the cmdwin buffer, and give it a special name instead,
similar to what's done for quickfix buffers and for unnamed
prompt and scratch buffers. As a result, BufFilePre/Post are
no longer fired when opening the cmdwin. Add a "command" key
to the dictionary returned by getbufinfo() to differentiate
the cmdwin buffer instead. (Sean Dewar)
Cherry-pick test_normal changes from v9.0.0954.
1fb4103206
Problem: Autocmds triggered from opening the cmdwin (in win_split and
do_ecmd) can cause issues such as E199, as the current checks
are insufficient.
Solution: Commands executed from the cmdwin apply to the old curwin/buf,
so they should be kept in a "suspended" state; abort if
they've changed. Also abort if cmdwin/buf was tampered with,
and check that curwin is correct. Try to clean up the cmdwin
buffer (only if hidden and non-current to simplify things; the
same approach is used when closing cmdwin normally), and add a
beep. (Sean Dewar)
Rename the old Test_cmdwin_interrupted() like in the patch (can be moved to
test_cmdwin.vim when v9.0.0027 is ported).
Move the error message to `e_active_window_or_buffer_changed_or_deleted`.
43b395ec2e
Problem: Things that temporarily change/restore curwin/buf (e.g:
win_execute, some autocmds) may break assumptions that
curwin/buf is the cmdwin when "cmdwin_type != 0", causing
issues.
Solution: Expose the cmdwin's real win/buf and check that instead. Also
try to ensure these variables are NULL if "cmdwin_type == 0",
allowing them to be used directly in most cases without
checking cmdwin_type. (Sean Dewar)
Reset and save `cmdwin_old_curwin` in a similar fashion.
Apply suitable changes for API functions and add Lua tests.
988f74311c
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: vim/vim#1269892e90a1e10
Co-authored-by: Casey Tucker <dctucker@hotmail.com>
Problem: Incorrect number of trailing spaces inserted for multibyte
characters when pasting a blockwise register in blockwise visual
mode (VanaIgr)
Solution: Skip over trailing UTF-8 bytes when computing the number of trailing
spaces (VanaIgr)
When pasting in blockwise visual mode, and the register type is <CTRL-V>, Vim
aligns the text after the replaced area by inserting spaces after pasted
lines that are shorter than the longest line. When a shorter line contains
multibyte characters, each trailing UTF-8 byte's width is counted in addition
to the width of the character itself. Each trailing byte counts as being 4
cells wide (since it would be displayed as <xx>).
closes: vim/vim#139096638ec8afa
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
