An extra backtick was explicitly written to show what a backtick looked
like, but it interferes with the syntax highlighting which thinks that
it's a part of a concealed group and couples it with the wrong backtick.
When trying to load a language parser, escape the value of
the language.
With language injection, the language might be picked up from the
buffer. If this value is erroneous it can cause `nvim_get_runtime_file`
to hard error.
E.g., the markdown expression `~~~{` will extract '{' as a language and
then try to get the parser using `parser/{*` as the pattern.
Problem: Cannot change the register used for Select mode delete.
Solution: Make CTRL-R set the register to be used when deleting text for
Select mode. (Shougo Matsushita, closesvim/vim#9531)
4ede01f188
Problem: "verbose set efm" reports the location of the :compiler command.
(Gary Johnson)
Solution: Add the "-keepscript" argument to :command and use it when
defining CompilerSet.
58ef8a31d7
This is a follow-on to #17040. The real benefit of #17040 was ensuring
that the ftplugin FileType autocommand was defined first and thus always
fired first. A side effect of the implementation in #17040 was that
setting variables that modified the state of filetype detection (such as
g:did_load_filetypes or g:do_filetype_lua) could no longer be set in the
user's init file. Filetype detection can also no longer be prevented
from loading by using `:filetype off`.
This PR addresses both of those side effects by unconditionally sourcing
ftplugin.vim and indent.vim before the user's init file (which ensures
that these autocommands run first) and sourcing filetype.vim *after* the
user's init file (thus allowing it to be blocked or modified).
When `man -w` is called with an empty string as section name, it may
fail with an error code, which causes :Man to no longer work without a
section. Just remove that argument when no section is specified.
This commits introduces two performance improvements in incremental sync:
* avoiding expensive lua string reallocations on each on_lines call by requesting
only the changed chunk of the buffer as reported by firstline and new_lastline
parameters of on_lines
* re-using already allocated tables for storing the resulting lines to reduce the load on
the garbage collector
The majority of the performance improvement is from requesting only changed chunks
of the buffer.
Benchmark:
The following code measures the time required to perform a buffer edit to
that operates individually on each line, common to plugins such as vim-commentary.
set rtp+=~/.config/nvim/plugged/nvim-lspconfig
set rtp+=~/.config/nvim/plugged/vim-commentary
lua require('lspconfig')['ccls'].setup({})
function! Benchmark(tries) abort
let results_comment = []
let results_undo = []
for i in range(a:tries)
echo printf('run %d', i+1)
let begin = reltime()
normal gggcG
call add(results_comment, reltimefloat(reltime(begin)))
let begin = reltime()
silent! undo
call add(results_undo, reltimefloat(reltime(begin)))
redraw
endfor
let avg_comment = 0.0
let avg_undo = 0.0
for i in range(a:tries)
echomsg printf('run %3d: comment=%fs undo=%fs', i+1, results_comment[i], results_undo[i])
let avg_comment += results_comment[i]
let avg_undo += results_undo[i]
endfor
echomsg printf('average: comment=%fs undo=%fs', avg_comment / a:tries, avg_undo / a:tries)
endfunction
command! -bar Benchmark call Benchmark(10)
All text changes will be recorded within a single undo operation. Both the
comment operation itself and the undo operation will generate an on_lines event
for each changed line. Formatter plugins using setline() have also been found
to exhibit the same problem (neoformat, :RustFmt in rust.vim), as this function
too generates an on_lines event for every line it changes.
Using the neovim codebase as an example (commit 2ecf0a4)
with neovim itself built at 2ecf0a4 with
CMAKE_BUILD_TYPE=Release shows the following performance improvement:
src/nvim/lua/executor.c, 1432 lines:
- baseline, no optimizations: comment=0.540587s undo=0.440249s
- without double-buffering optimization: comment=0.183314s undo=0.060663s
- all optimizations in this commit: comment=0.174850s undo=0.052789s
src/nvim/search.c, 5467 lines:
- baseline, no optimizations: comment=7.420446s undo=7.656624s
- without double-buffering optimization: comment=0.889048s undo=0.486026s
- all optimizations in this commit: comment=0.662899s undo=0.243628s
src/nvim/eval.c, 11355 lines:
- baseline, no optimizations: comment=41.775695s undo=44.583374s
- without double-buffering optimization: comment=3.643933s undo=2.817158s
- all optimizations in this commit: comment=1.510886s undo=0.707928s
Co-authored-by: Dmytro Meleshko <dmytro.meleshko@gmail.com>
This includes a partial port of Vim patch 8.2.2569 and some changes to
nvim_eval_statusline() to allow a multibyte fillchar. Literally every
line of C code touched by that patch has been refactored in Nvim, and
that patch contains some irrelevant foldcolumn tests I'm not sure how to
port (as Nvim's foldcolumn behavior has diverged from Vim's).
Closes https://github.com/neovim/neovim/issues/13647
This allows customizing the priority of the highlights.
* Add default priority of 50
* Use priority of 200 for highlight on yank
* use priority of 40 for highlight references (LSP)
Problem: 'virtualedit' can only be set globally.
Solution: Make 'virtualedit' global-local. (Gary Johnson, closesvim/vim#8638)
53ba05b090
I changed some macros to unsigned integer literals to avoid compiler warnings.
This gives quickfix/location lists created by handlers which use
'response_to_list' (textDocument/documentSymbols and workspace/symbol by
default) the ability to set a more useful list title. This commit gives
lists created for documentSymbols a title of the form:
Symbols in <filename>
and lists for workspace/symbol a title of the form:
Symbols matching '<query>'
These are more informative than a standard "Language Server" list title
and can help disambiguate results when users have multiple quickfix
lists that they cycle through with `:colder` and `:cnewer`.
This removes the "fallback" to utf-16 in many of our helper functions. We
should always explicitly pass these around when possible except in two
locations:
* generating params with help utilities called by buf.lua functions
* the buf.lua functions themselves
Anything that is called by the handler should be passed the offset encoding.
omnisharp-roslyn can send negative values:
{
activeParameter = 0,
activeSignature = -1,
signatures = { {
documentation = "",
label = "TestEntity.TestEntity()",
parameters = {}
} }
}
In 3.16 of the specification `activeSignature` is defined as `uinteger`
and therefore negative values shouldn't be allowed, but within 3.15 it
was defined as `number` which makes me think we can be a bit lenient in
this case and handle them.
The expected behavior is quite clear:
The active signature. If omitted or the value lies outside the
range of `signatures` the value defaults to zero or is ignored if
the `SignatureHelp` has no signatures.
Fixes an error:
util.lua:1685: attempt to get length of local 'lines' (a nil value)
util.lua:1685: in function 'trim_empty_lines'
handlers.lua:334: in function 'textDocument/signatureHelp'
* vim-patch:8.2.4064: foam files are not detected
Problem: Foam files are not detected.
Solution: Detect the foam filetype by the path and file contents. (Mohammed
Elwardi Fadeli, closesvim/vim#9501)
2284f6cca3
* Port foam ft detection to filetype.lua
Co-authored-by: Gregory Anders <greg@gpanders.com>
Part of the `pending_change` closure in the `changetracking.prepare` was
a bit confusing because it has access to `bufnr` and `uri` but it could
actually contain pending changes batched for multiple buffers.
(We accounted for that by grouping `pending_changes` by a `uri`, but
it's not obvious what's going on)
This commit changes the approach to do everything per buffer to avoid
any ambiguity.
It also brings the debounce/no-debounce a bit closer together: The
only difference is now whether a timer is used or if it is triggered
immediately
Fixes man.vim's searching on some systems (namely mandoc) where
previously it would not respect the value of b:man_default_sects. It now
properly parses man pages on these systems.
Follow up to https://github.com/neovim/neovim/pull/16881
Document changes could get sent out of order to the server:
1. on_lines: debounce > 0; add to pending changes; setup timer
2. on_lines: debounce = 0; send new changes immediately
3. timer triggers, sending changes from 1.
Closes https://github.com/neovim/neovim/issues/16985
* get_lines checks if buf_loaded using bufnr 0, which is
typically used as a sentinel value, but here must be resolved
to the true bufnr
Negative priority patterns are those that act as catch-alls when all
other attempts at matching have failed (typically the patterns that use
the StarSetf functions).
The idea of the debounce is to avoid overloading a server with didChange
notifications. So far this used a constant value to group changes within
an interval together and send a single notification. A side effect of
this is that when you were idle, notifications are still delayed.
This commit changes the logic to take the time the last notification
happened into consideration, if it has been greater than the debounce
interval, the debouncing is skipped or at least reduced.
Because filetype.lua is gated behind an opt-in variable, it's not tested
during the "standard" test_filetype.vim test. So port the test into
filetype_spec where we enable the opt-in variable.
This means runtime Vim patches will need to update test_filetype in two
places. This can eventually be removed if/when filetype.lua is made
opt-out rather than opt-in.
Filetype detection runs on BufRead and BufNewFile autocommands, both of
which can fire without an underlying buffer, so it's incorrect to use
<abuf> to determine the file path. Instead, match on <afile> and assume
that the buffer we're operating on is the current buffer. This is the
same assumption that filetype.vim makes, so it should be safe.
This default value is also set in filetype.vim, but if filetype.vim is
disabled the variable is never defined, which causes errors in some of
the dist#ft detection functions.
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Sebastian Volland <seb@baunz.net>
Co-authored-by: Lewis Russell <lewis6991@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
This introduces two new functions `vim.keymap.set` & `vim.keymap.del`
differences compared to regular set_keymap:
- remap is used as opposite of noremap. By default it's true for <Plug> keymaps and false for others.
- rhs can be lua function.
- mode can be a list of modes.
- replace_keycodes option for lua function expr maps. (Default: true)
- handles buffer specific keymaps
Examples:
```lua
vim.keymap.set('n', 'asdf', function() print("real lua function") end)
vim.keymap.set({'n', 'v'}, '<leader>lr', vim.lsp.buf.references, {buffer=true})
vim.keymap.set('n', '<leader>w', "<cmd>w<cr>", {silent = true, buffer = 5 })
vim.keymap.set('i', '<Tab>', function()
return vim.fn.pumvisible() == 1 and "<C-n>" or "<Tab>"
end, {expr = true})
vim.keymap.set('n', '[%', '<Plug>(MatchitNormalMultiBackward)')
vim.keymap.del('n', 'asdf')
vim.keymap.del({'n', 'i', 'v'}, '<leader>w', {buffer = 5 })
```
Problem: Not all sshconfig files are detected as such.
Solution: Adjust the patterns used for sshconfig detection. (David Auer,
closesvim/vim#9322)
9acf2d8be9
Other refs to 05.3 don't need to be updated as they refer to the simple mappings
section anyway. Seems they weren't updated when the defaults.vim section was
added as 05.3 instead.
As revealed by #16745, some functions pass a nil value to API functions,
which have been implicitly converted to 0. #16745 breaks this implicit
conversion, so explicitly pass a resolved buffer number to these API
functions.
Function arguments that expect a list should explicitly use tbl_islist
rather than just checking for a table. This helps catch some simple
errors where a single table item is passed as an argument, which passes
validation (since it's a table), but causes other errors later on.
Problem: Some common lisp and scheme files not recognized.
Solution: Recognize *.asd as lisp and *.sld as scheme. (Alex Vear,
closesvim/vim#9447)
654b729c4c
Behavioral changes:
1. Added support for lua function in keymaps in
--------------------------------------------
- nvim_set_keymap
Can set lua function as keymap rhs like following:
```lua
vim.api.nvim_{buf_}set_keymap('n', '<leader>lr', '', {callback = vim.lsp.buf.references})
```
Note: lua function can only be set from lua . If api function being
called from viml or over rpc this option isn't available.
- nvim_{buf_}get_keymap
When called from lua, lua function is returned is `callback` key .
But in other cases callback contains number of the function ref.
- :umap, nvim_del_keymap & nvim_buf_del_keymap clears lua keymaps correctly.
- :map commands for displaing rhs .
For lua keymaps rhs is displayed as <Lua function ref_no>
Note: lua keymap cannot be set through viml command / functions.
- mapargs()
When dict is false it returns string in `<Lua function ref_no>`
format (same format as :map commands).
When dict is true it returns ref_no number in `callback` key.
- mapcheck()
returns string in `<Lua function ref_no>` format (same format as :map commands).
2. Added support for keymap description
---------------------------------------
- nvim_{buf_}set_keymap: added `desc` option in opts table .
```lua
vim.api.nvim_set_keymap('n', '<leader>w', '<cmd>w<cr>', {desc='Save current file'})
```
- nvim_{buf_}get_keymap: contains `desc` in returned list.
- commands like `:nmap <leader>w` will show description in a new line below rhs.
- `maparg()` return dict contains `desc`.
