Problem: Prompts are emitted as messages events, where cmdline events
are more appropriate. The user input is also emitted as
message events in fast context, so cannot be displayed with
vim.ui_attach().
Solution: Ask for user input through cmdline prompts.
When a terminal application running inside the terminal emulator sets
the cursor shape or blink status of the cursor, update the cursor in the
parent terminal to match.
This removes the "virtual cursor" that has been in use by the terminal
emulator since the beginning. The original rationale for using the
virtual cursor was to avoid having to support additional UI methods to
change the cursor color for other (non-TUI) UIs, instead relying on the
TermCursor and TermCursorNC highlight groups.
The TermCursor highlight group is now used in the default 'guicursor'
value, which has a new entry for Terminal mode. However, the
TermCursorNC highlight group is no longer supported: since terminal
windows now use the real cursor, when the window is not focused there is
no cursor displayed in the window at all, so there is nothing to
highlight. Users can still use the StatusLineTermNC highlight group to
differentiate non-focused terminal windows.
BREAKING CHANGE: The TermCursorNC highlight group is no longer supported.
Problem: hard to view an existing buffer in the preview window
Solution: add the :pbuffer command (Yinzuo Jiang)
Similar as `:pedit` and `:buffer` command. `:pbuffer` edits buffer [N]
from the buffer list in the preview window.
`:pbuffer` can also open special buffer, for example terminal buffer.
closes: vim/vim#16222a2a2fe841e
Cherry-pick Test_popup_and_previewwindow_dump() changes from patch
9.0.0625.
Cherry-pick Run_noroom_for_newwindow_test() changes from patches
8.2.0432 and 9.0.0363.
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem:
- API functions using `try_start` directly, do not surface the
underlying error message, and instead show generic messages.
- Error-handling code is duplicated in the API impl.
- Failure modes are not tested.
Solution:
- Use `TRY_WRAP`.
- Add tests.
Problem:
Regression from de794f2d24: `vim.diagnostic.setqflist{open=true}` attempts to
open the location list instead of the diagnostics quickfix list if it didn't
exist before. This is because we are using `qf_id` to decide which to open, but
`qf_id=nil` when there is no existing diagnostics quickfix list with a given
title ("Diagnostics" by default).
Solution:
- Revert to using `loclist` to decide which to open.
- Add tests.
Problem:
- API functions using `try_start` directly instead of `TRY_WRAP`, do not
surface the underlying error message, and instead show generic things
like "Failed to set buffer".
- Error handling code is duplicated in the API impl, instead of
delegating to the vim buffer/window handling logic.
Solution:
- Use `TRY_WRAP`.
## Problem
With 'winfixbuf' enabled, `nvim_win_set_buf` and `nvim_set_current_buf` fail
even if targeting the already-current buffer.
vim.wo.winfixbuf = true
vim.api.nvim_win_set_buf(0, 0)
vim.api.nvim_set_current_buf(0)
Solution:
Check for this condition.
Problem:
Since e049c6e4c0, most statusline-like UI elements can combine
highlight attrs, except for sign/statuscolumn.
Solution:
Implement for sign/statuscolumn.
Problem:
An LSP configuration that creates client with no root_dir or
workspace_folders can result in vim.lsp.enable attaching to it multiple
times.
Solution:
When checking existing clients, reuse a client if it wasn't initially
configured have any workspace_folders. This more closely matches the
behaviour we had prior to d9235ef
**Problem:**
The brackets in the RFC2732 regular expression are currently unescaped,
causing them to be misinterpreted as special characters denoting
character groups rather than as literal characters.
**Solution:**
Escape the brackets.
Fix#31270
Problem: Float preview window still exist when back at original.
Or no info item is selected.
Solution: if selected is -1 or no info is selected, if float preview
window exist close it first.
**Problem:** Currently, it is difficult to get node(s)-level metadata
for a capture returned by `get_captures_at_pos()`. This is because it is
stored in `metadata[id]` and we do not have access to the value of `id`,
so to get this value we have to iterate over the keys of `metadata`. See
[this commit](d636229300 (diff-8bd4742121c2f359d0345f3c6c253a58220f1a28670cc4e1c957992232059a6cR16)).
Things would be much simpler if we were given the `id` of the capture so
we could use it to just index `metadata` directly.
**Solution:** Include `id` in the data returned by
`get_captures_at_pos()`
Design goals/requirements:
- Default configuration of a server can be distributed across multiple sources.
- And via RTP discovery.
- Default configuration can be specified for all servers.
- Configuration _can_ be project specific.
Solution:
- Two new API's:
- `vim.lsp.config(name, cfg)`:
- Used to define default configurations for servers of name.
- Can be used like a table or called as a function.
- Use `vim.lsp.confg('*', cfg)` to specify default config for all
servers.
- `vim.lsp.enable(name)`
- Used to enable servers of name. Uses configuration defined
via `vim.lsp.config()`.
- Problem: cannot replace the initial bufwrite message (from `filemess`) by the final one (`"test.lua" [New] 0L, 0B written`), when using `vim.ui_attach`.
- Solution: add kind to both messages.
Problem: :sleep! not hiding the cursor is an arbitrary difference from
Vim without obvious justification, and Vim's behavior isn't
easily achievable in Nvim.
Solution: Make :sleep! hide the cursor while sleeping.
Ref:
6a01b3fcc3b5c0ade437
Problem:
char-wise folding for `#trim!` ranges are improperly calculated for nodes that
end at column 0, due to the way `get_node_text` works.
Solution:
Add the blank line that `get_node_text` removes for for nodes ending at column
0. Also properly set column positions when performing linewise trims.
Problem:
vim.json.encode escapes every slash in string values (for example in
file paths), and is not optional. Use-case is for preventing HTML
injections (eg. injecting `</script>` closing tag); in the context of
Nvim this is rarely useful.
Solution:
- Add a `escape_slash` flag to `vim.json.encode`.
- Defaults to `false`. (This is a "breaking" change, but more like
a bug fix.)
This commit also implements more generic trimming, acting on all
whitespace (charwise) rather than just empty lines.
It will unblock
https://github.com/nvim-treesitter/nvim-treesitter/pull/3442 and allow
for properly concealing markdown bullet markers regardless of indent
width, e.g.
Problem: When completion leader changes, text that might be reinserted
immediately after is deleted. This unnecessarily affects
extmarks. #31387 restored the original extmarks but that
prevents end_right_gravity marks from growing.
Solution: Avoid deleting leader text that will be reinserted.
Problem: In an autocommand Lua callback whether `args.file` is expanded
depends on whether `expand('<afile>')` has been called.
Solution: Always use the unexpanded file name for `args.file`.
Related to #31306 and vim/vim#16106. This doesn't provide `sfname`, but
at least makes `args.file` have a consistent value.
Problem: Marks that are properly restored by the splice associated with
an undo edit, are unnecessarily pushed to the undo header. This
results in incorrect mark tracking in the "copy_only"
save/restore completion path.
Solution: Avoid pushing left gravity marks at the beginning of the range,
and right gravity marks at the end of the range to the undo
header.
In release builds, the Compilation: line is omitted so the build is reproducible. Since the "fall-back for $VIM" line is always present, check for that instead.
Problem:
- nvim_subscribe, nvim_unsubscribe were deprecated in
aec4938a21 but this wasn't set in the
API metadata.
- The function annotations
```
FUNC_API_SINCE(1) FUNC_API_REMOTE_ONLY FUNC_API_DEPRECATED_SINCE(13)
```
cause this test to fail:
```
RUN T3 api metadata functions are compatible with old metadata or have new level: 3.00 ms ERR
test/functional/api/version_spec.lua:135: function vim_subscribe was removed but exists in level 0 which nvim should be compatible with
stack traceback:
test/functional/api/version_spec.lua:135: in function <test/functional/api/version_spec.lua:128>
```
Solution:
- Set the API metadata.
- Rearrange the annotations so that FUNC_API_DEPRECATED_SINCE is 2nd:
```
FUNC_API_SINCE(1) FUNC_API_DEPRECATED_SINCE(13) FUNC_API_REMOTE_ONLY
```
* refactor(shared): extract `vim._list_insert` and `vim._list_remove`
* feat(lsp): add `vim.lsp.foldexpr()`
* docs(lsp): add a todo for state management
* feat(lsp): add `vim.lsp.folding_range.foldclose()`
* feat(lsp): schedule `foldclose()` if the buffer is not up-to-date
* feat(lsp): add `vim.lsp.foldtext()`
* feat(lsp): support multiple folding range providers
* refactor(lsp): expose all folding related functions under `vim.lsp.*`
* perf(lsp): add `lsp.MultiHandler` for do `foldupdate()` only once
