Problem: Command line is not cleared when switching tabs and the command
line height differs.
Solution: Set the "clear_cmdline" flag when needed. (Naruhiko Nishino,
closesvim/vim#5495)
479950f6c9
- The previous commit lost information in the tests. Instead, add some
more "normalization" substitutions in pcall_err(), so that the general
shape of the stacktrace is included in the asserted text.
- Eliminate contains(), it is redundant with matches()
Problem: 'verbose' value 16 causes duplicate output.
Solution: Combine levels 15 and 16 into one message. (Christian Brabandt,
closesvim/vim#6153)
823654bc06
54ce101 changed the way undo entries are created when adding decorations.
This creates all sorts of problems.This change fixes the problem by
reverting to the previous behavior.
as well as copy_text_attr, text_to_screenline.
Display of folded line is now done via win_line, which reduces code
deduplication.
As fold_line was a trimmed down version of win_line, this change brings
new features such CursorLineNr highighting even on folded line, as well
as CursorLine highlighting.
- TUI: Fix a case where the cursor was not displayed after hiding the
cursor and then setting it to be displayed again.
- Change to reset everything before setting guicursor.
fixes#12800close#12811
Steps to reproduce:
nvim -u NORC
:set termguicolors
:hi nCursor guifg=red guibg=red
:hi iCursor guifg=green guibg=green
:hi cCursor guifg=blue guibg=blue
:set guicursor=n:block-nCursor,i:hor25-iCursor,c:ver25-cCursor
:set guicursor-=c:ver25-cCursor
Actual behaviour: Cursor is a blue vertical.
Expected behaviour: Cursor should be the default color block.
- remove redundant autocmd list
This "grouped" list is useless, it only gets in the way when searching
for event names.
- intro.txt: cleanup
- starting.txt: update, revisit
- doc: `:help bisect`
- mbyte.txt: update aliases 1656367b90. closes#11960
- options: remove 'guifontset'. Why:
- It is complicated and is used by almost no one.
- It is unlikely to be implemented by Nvim GUIs (complicated to parse,
specific to Xorg...).
Problem: Line numbers below filler lines not always updated.
Solution: Don't break out of the win_line() loop too early. (Christian
Brabandt, closesvim/vim#6294, closesvim/vim#6138)
511feec6f0
Problem: Spell highlight is wrong at start of the line.
Solution: Fix setting the "v" variable. (closesvim/vim#5078)
7751d1d1a3
Skip spell tests in OpenBSD.
Nvim or screen likely crashed.
Revist once issue #12104 is fixed.
Skip the test for the following reasons:
- unknown regression caused by https://github.com/neovim/neovim/issues/12104
- cannot revert failing test from ed0d135247
* Reuse inccommand preview window
Currently, show_sub (inside ex_substitute) creates a new split on each
run for its existing buffer, and ex_substitute calls close_windows for
it. This functionality seems to relay in delayed operations on window
structures where the close event on the newest window is "cancelled" by
win_grid_alloc. But for multigrid, there is optimization in place in
win_grid_alloc which causes any (unnecessary?) allocations to be
skipped, and thus inccommand preview window is not preserved but closed
immediately. Alternative fix would be to remove said optimization, but
the whole "lets create a new split each time and trash the earlier
window" seems too wasteful.
Fix#11529
* Update failing test
The failing test sets inccommand=split and does `:%s/.`, but isn't
expecting to get any contents for the preview window, other than the
windows status line. Update the test to include the preview window
contents too.
Since "nvim_get_option" is executed on the tui thread as a C function
instead of msgpack-rpc, it accesses global variables that may change on the
main thread.
Add new "splice" interface for tracking buffer changes at the byte
level. This will later be reused for byte-resolution buffer updates.
(Implementation has been started, but using undocumented "_on_bytes"
option now as interface hasn't been finalized).
Use this interface to improve many edge cases of extmark adjustment.
Changed tests indicate previously incorrect behavior. Adding tests for
more edge cases will be follow-up work (overlaps on_bytes tests)
Don't consider creation/deletion of marks an undoable event by itself.
This behavior was never documented, and imposes complexity for little gain.
Add nvim__buf_add_decoration temporary API for direct access to the new
implementation. This should be refactored into a proper API for
decorations, probably involving a huge dict.
fixes#11598
Problem: The Normal highlight is not defined when compiled with GUI.
Solution: Always define Normal. (Christian Brabandt, closesvim/vim#4072)
f90b6e03a9
Problem: Popupmenu is too far left when completion is long. (Linwei)
Solution: Adjust column computations. (Hirohito Higashi, closesvim/vim#2661)
bb008dd323
Problem: The minimum width of the popup menu is hard coded.
Solution: Add the 'pumwidth' option. (Christian Brabandt, James McCoy,
closesvim/vim#2314)
a8f04aa275
Autocmds may close window while it is being entered, then
win_set_minimal_style(wp) operates on an invalid pointer.
We could silently ignore this instead, but it is unlikely to be
intentional, so it is more useful to show an error.
fix#11383
These options were previously global. A global-local window option
behaves closer to a global option "per default" (i e with :set),
but still supports local behavior via :setl
Also this restores back-compat for nvim_set_option("fcs", ...)
which are currently broken on 0.4.x but worked in earlier versions
NB: this is not the final implementation. Bufhl should be made a
part of the extmark tree, so that "start" adjustment just works
automatically. But "stop" will still need some ad-hoc trickery,
until extended marks natively support ranges (hopefully sooner than
forever).
* Clear 'cc' in nvim_open_win 'minimal' style #11361
Add 'colorcolumn' to the list of options that should be cleared when creating
a 'minimal'-style floating window.
- Running out of retries, or unexpected screen state should make the
test FAIL, not ERROR.
- Uses levels to report the location of the caller.
- Improve message with retry-failure (formatting).
Before:
[ RUN ] test: 103.53 ms ERR
test/functional/helpers.lua:388:
retry() attempts: 1
test/functional/ui/screen.lua:587: Row 1 did not match.
Expected:
|*X^ |
|{0:~ }|
|{0:~ }|
| |
Actual:
|*^ |
|{0:~ }|
|{0:~ }|
| |
To print the expect() call that would assert the current screen state, use
screen:snapshot_util(). In case of non-deterministic failures, use
screen:redraw_debug() to show all intermediate screen states.
stack traceback:
test/functional/helpers.lua:388: in function 'retry'
test/functional/test_spec.lua:24: in function <test/functional/test_spec.lua:23>
After:
[ RUN ] test: 105.22 ms FAIL
test/functional/test_spec.lua:24: stopping after 1 retry() attempts.
test/functional/test_spec.lua:25: Row 1 did not match.
Expected:
|*X^ |
|{0:~ }|
|{0:~ }|
| |
Actual:
|*^ |
|{0:~ }|
|{0:~ }|
| |
To print the expect() call that would assert the current screen state, use
screen:snapshot_util(). In case of non-deterministic failures, use
screen:redraw_debug() to show all intermediate screen states.
stack traceback:
test/functional/helpers.lua:389: in function 'retry'
test/functional/test_spec.lua:24: in function <test/functional/test_spec.lua:23>
It is perfectly fine and expected to detach from the screen just by
the UI disconnecting from nvim or exiting nvim. Just keep detach() in
screen_basic_spec, to get some coverage of the detach method itself.
This avoids hang on failure in many situations (though one could argue
that detach() should be "fast", or at least "as fast as resize",
which works in press-return already).
Never use detach() just to change the size of the screen, try_resize()
method exists for that specifically.
PR #8221 took a short-cut when implementing the tests: screen.lua would
translate the linegrid highlight ids back into the old per-cell
attribute description.
Apart from cleaning up technical debt, this enables to check both rgb
and cterm colors in the same expect(), which previously was needlessly
restricted to ext_hlstate tests only.
* mode_spec: retry with increasing matchtime
`matchtime=2` might still be too low (with luacov on AppVeyor).
[ ERROR ] test/functional\ui\mode_spec.lua @ 47: ui mode_change event works in insert mode
test\functional\ui\screen.lua:587: mode
Expected objects to be the same.
Passed in:
(string) 'insert'
Expected:
(string) 'showmatch'
Hint: full state of "mode":
"insert"
Followup to fe60013fb.
ref #10941
Initially regressed in 7ed2122622
``
* ui/screen_basic_spec: set timeoutlen=10000
This fixes the test on slow CI.
Ref: https://ci.appveyor.com/project/neovim/neovim/builds/27600387/job/t468h2b3w9lwtlm5#L10930
