neovim/runtime/pack/dist/opt/termdebug/plugin/termdebug.vim

" Debugger plugin using gdb.
"
" Author: Bram Moolenaar
" Copyright: Vim license applies, see ":help license"
" Last Change: 2021 Nov 21
"
" WORK IN PROGRESS - Only the basics work
" Note: On MS-Windows you need a recent version of gdb.  The one included with
" MingW is too old (7.6.1).
" I used version 7.12 from http://www.equation.com/servlet/equation.cmd?fa=gdb
"
" There are two ways to run gdb:
" - In a terminal window; used if possible, does not work on MS-Windows
"   Not used when g:termdebug_use_prompt is set to 1.
" - Using a "prompt" buffer; may use a terminal window for the program
"
" For both the current window is used to view source code and shows the
" current statement from gdb.
"
" USING A TERMINAL WINDOW
"
" Opens two visible terminal windows:
" 1. runs a pty for the debugged program, as with ":term NONE"
" 2. runs gdb, passing the pty of the debugged program
" A third terminal window is hidden, it is used for communication with gdb.
"
" USING A PROMPT BUFFER
"
" Opens a window with a prompt buffer to communicate with gdb.
" Gdb is run as a job with callbacks for I/O.
" On Unix another terminal window is opened to run the debugged program
" On MS-Windows a separate console is opened to run the debugged program
"
" The communication with gdb uses GDB/MI.  See:
" https://sourceware.org/gdb/current/onlinedocs/gdb/GDB_002fMI.html
"
" For neovim compatibility, the vim specific calls were replaced with neovim
" specific calls:
"   term_start -> term_open
"   term_sendkeys -> chansend
"   term_getline -> getbufline
"   job_info && term_getjob -> using linux command ps to get the tty
"   balloon -> nvim floating window
"
" The code for opening the floating window was taken from the beautiful
" implementation of LanguageClient-Neovim:
" https://github.com/autozimu/LanguageClient-neovim/blob/0ed9b69dca49c415390a8317b19149f97ae093fa/autoload/LanguageClient.vim#L304
"
" Neovim terminal also works seamlessly on windows, which is why the ability
" Author: Bram Moolenaar
" Copyright: Vim license applies, see ":help license"

" In case this gets sourced twice.
if exists(':Termdebug')
  finish
endif

" The terminal feature does not work with gdb on win32.
if !has('win32')
  let s:way = 'terminal'
else
  let s:way = 'prompt'
endif

let s:keepcpo = &cpo
set cpo&vim

" The command that starts debugging, e.g. ":Termdebug vim".
" To end type "quit" in the gdb window.
command -nargs=* -complete=file -bang Termdebug call s:StartDebug(<bang>0, <f-args>)
command -nargs=+ -complete=file -bang TermdebugCommand call s:StartDebugCommand(<bang>0, <f-args>)

" Name of the gdb command, defaults to "gdb".
if !exists('g:termdebugger')
  let g:termdebugger = 'gdb'
endif

let s:pc_id = 12
let s:asm_id = 13
let s:break_id = 14  " breakpoint number is added to this
let s:stopped = 1

let s:parsing_disasm_msg = 0
let s:asm_lines = []
let s:asm_addr = ''

" Take a breakpoint number as used by GDB and turn it into an integer.
" The breakpoint may contain a dot: 123.4 -> 123004
" The main breakpoint has a zero subid.
func s:Breakpoint2SignNumber(id, subid)
  return s:break_id + a:id * 1000 + a:subid
endfunction

func s:Highlight(init, old, new)
  let default = a:init ? 'default ' : ''
  if a:new ==# 'light' && a:old !=# 'light'
    exe "hi " . default . "debugPC term=reverse ctermbg=lightblue guibg=lightblue"
  elseif a:new ==# 'dark' && a:old !=# 'dark'
    exe "hi " . default . "debugPC term=reverse ctermbg=darkblue guibg=darkblue"
  endif
endfunc

call s:Highlight(1, '', &background)
hi default debugBreakpoint term=reverse ctermbg=red guibg=red

func s:StartDebug(bang, ...)
  " First argument is the command to debug, second core file or process ID.
  call s:StartDebug_internal({'gdb_args': a:000, 'bang': a:bang})
endfunc

func s:StartDebugCommand(bang, ...)
  " First argument is the command to debug, rest are run arguments.
  call s:StartDebug_internal({'gdb_args': [a:1], 'proc_args': a:000[1:], 'bang': a:bang})
endfunc

func s:StartDebug_internal(dict)
  if exists('s:gdbwin')
    echoerr 'Terminal debugger already running, cannot run two'
    return
  endif
  if !executable(g:termdebugger)
    echoerr 'Cannot execute debugger program "' .. g:termdebugger .. '"'
    return
  endif

  let s:ptywin = 0
  let s:pid = 0
  let s:asmwin = 0

  if exists('#User#TermdebugStartPre')
    doauto <nomodeline> User TermdebugStartPre
  endif

  " Uncomment this line to write logging in "debuglog".
  " call ch_logfile('debuglog', 'w')

  let s:sourcewin = win_getid(winnr())

  " Remember the old value of 'signcolumn' for each buffer that it's set in, so
  " that we can restore the value for all buffers.
  let b:save_signcolumn = &signcolumn
  let s:signcolumn_buflist = [bufnr()]

  let s:save_columns = 0
  let s:allleft = 0
  if exists('g:termdebug_wide')
    if &columns < g:termdebug_wide
      let s:save_columns = &columns
      let &columns = g:termdebug_wide
      " If we make the Vim window wider, use the whole left halve for the debug
      " windows.
      let s:allleft = 1
    endif
    let s:vertical = 1
  else
    let s:vertical = 0
  endif

  " Override using a terminal window by setting g:termdebug_use_prompt to 1.
  let use_prompt = exists('g:termdebug_use_prompt') && g:termdebug_use_prompt
  if !has('win32') && !use_prompt
    let s:way = 'terminal'
   else
    let s:way = 'prompt'
   endif

  if s:way == 'prompt'
    call s:StartDebug_prompt(a:dict)
  else
    call s:StartDebug_term(a:dict)
  endif

  if exists('g:termdebug_disasm_window')
    if g:termdebug_disasm_window
      let curwinid = win_getid(winnr())
      call s:GotoAsmwinOrCreateIt()
      call win_gotoid(curwinid)
    endif
  endif

  if exists('#User#TermdebugStartPost')
    doauto <nomodeline> User TermdebugStartPost
  endif
endfunc

" Use when debugger didn't start or ended.
func s:CloseBuffers()
  exe 'bwipe! ' . s:ptybuf
  unlet! s:gdbwin
endfunc

func s:CheckGdbRunning()
  if nvim_get_chan_info(s:gdb_job_id) == {}
      echoerr string(g:termdebugger) . ' exited unexpectedly'
      call s:CloseBuffers()
      return ''
  endif
  return 'ok'
endfunc

func s:StartDebug_term(dict)
  " Open a terminal window without a job, to run the debugged program in.
  execute s:vertical ? 'vnew' : 'new'
  let s:pty_job_id = termopen('tail -f /dev/null;#gdb program')
  if s:pty_job_id == 0
    echoerr 'invalid argument (or job table is full) while opening terminal window'
    return
  elseif s:pty_job_id == -1
    echoerr 'Failed to open the program terminal window'
    return
  endif
  let pty_job_info = nvim_get_chan_info(s:pty_job_id)
  let s:ptybuf = pty_job_info['buffer']
  let pty = pty_job_info['pty']
  let s:ptywin = win_getid(winnr())
  if s:vertical
    " Assuming the source code window will get a signcolumn, use two more
    " columns for that, thus one less for the terminal window.
    exe (&columns / 2 - 1) . "wincmd |"
    if s:allleft
      " use the whole left column
      wincmd H
    endif
  endif

  " Create a hidden terminal window to communicate with gdb
  let s:comm_job_id = jobstart('tail -f /dev/null;#gdb communication', {
        \ 'on_stdout': function('s:CommOutput'),
        \ 'pty': v:true,
        \ })
  " hide terminal buffer
  if s:comm_job_id == 0
    echoerr 'invalid argument (or job table is full) while opening communication terminal window'
    exe 'bwipe! ' . s:ptybuf
    return
  elseif s:comm_job_id == -1
    echoerr 'Failed to open the communication terminal window'
    exe 'bwipe! ' . s:ptybuf
    return
  endif
  let comm_job_info = nvim_get_chan_info(s:comm_job_id)
  let commpty = comm_job_info['pty']

  " Open a terminal window to run the debugger.
  " Add -quiet to avoid the intro message causing a hit-enter prompt.
  let gdb_args = get(a:dict, 'gdb_args', [])
  let proc_args = get(a:dict, 'proc_args', [])

  let cmd = [g:termdebugger, '-quiet', '-tty', pty, '--eval-command', 'echo startupdone\n'] + gdb_args
  "call ch_log('executing "' . join(cmd) . '"')
  execute 'new'
  let s:gdb_job_id = termopen(cmd, {'on_exit': function('s:EndTermDebug')})
  if s:gdb_job_id == 0
    echoerr 'invalid argument (or job table is full) while opening gdb terminal window'
    exe 'bwipe! ' . s:ptybuf
    return
  elseif s:gdb_job_id == -1
    echoerr 'Failed to open the gdb terminal window'
    call s:CloseBuffers()
    return
  endif
  let gdb_job_info = nvim_get_chan_info(s:gdb_job_id)
  let s:gdbbuf = gdb_job_info['buffer']
  let s:gdbwin = win_getid(winnr())

  " Wait for the "startupdone" message before sending any commands.
  let try_count = 0
  while 1
    if s:CheckGdbRunning() != 'ok'
      return
    endif

    for lnum in range(1, 200)
      if get(getbufline(s:gdbbuf, lnum), 0, '') =~ 'startupdone'
    let try_count = 9999
    break
      endif
    endfor
    let try_count += 1
    if try_count > 300
      " done or give up after five seconds
      break
    endif
    sleep 10m
  endwhile

  " Set arguments to be run.
  if len(proc_args)
    call chansend(s:gdb_job_id, 'set args ' . join(proc_args) . "\r")
  endif

  " Connect gdb to the communication pty, using the GDB/MI interface.
  " Prefix "server" to avoid adding this to the history.
  call chansend(s:gdb_job_id, 'server new-ui mi ' . commpty . "\r")

  " Wait for the response to show up, users may not notice the error and wonder
  " why the debugger doesn't work.
  let try_count = 0
  while 1
    if s:CheckGdbRunning() != 'ok'
      return
    endif

    let response = ''
    for lnum in range(1, 200)
      let line1 = get(getbufline(s:gdbbuf, lnum), 0, '')
      let line2 = get(getbufline(s:gdbbuf, lnum + 1), 0, '')
      if line1 =~ 'new-ui mi '
        " response can be in the same line or the next line
        let response = line1 . line2
        if response =~ 'Undefined command'
          echoerr 'Sorry, your gdb is too old, gdb 7.12 is required'
          call s:CloseBuffers()
          return
        endif
        if response =~ 'New UI allocated'
          " Success!
          break
        endif
      elseif line1 =~ 'Reading symbols from' && line2 !~ 'new-ui mi '
        " Reading symbols might take a while, try more times
        let try_count -= 1
      endif
    endfor
    if response =~ 'New UI allocated'
      break
    endif
    let try_count += 1
    if try_count > 100
      echoerr 'Cannot check if your gdb works, continuing anyway'
      break
    endif
    sleep 10m
  endwhile

  " Interpret commands while the target is running.  This should usually only be
  " exec-interrupt, since many commands don't work properly while the target is
  " running.
  call s:SendCommand('-gdb-set mi-async on')
  " Older gdb uses a different command.
  call s:SendCommand('-gdb-set target-async on')

  " Disable pagination, it causes everything to stop at the gdb
  " "Type <return> to continue" prompt.
  call s:SendCommand('set pagination off')

  " Set the filetype, this can be used to add mappings.
  set filetype=termdebug

  call s:StartDebugCommon(a:dict)
endfunc

func s:StartDebug_prompt(dict)
  " Open a window with a prompt buffer to run gdb in.
  if s:vertical
    vertical new
  else
    new
  endif
  let s:gdbwin = win_getid(winnr())
  let s:promptbuf = bufnr('')
  call prompt_setprompt(s:promptbuf, 'gdb> ')
  set buftype=prompt
  file gdb
  call prompt_setcallback(s:promptbuf, function('s:PromptCallback'))
  call prompt_setinterrupt(s:promptbuf, function('s:PromptInterrupt'))

  if s:vertical
    " Assuming the source code window will get a signcolumn, use two more
    " columns for that, thus one less for the terminal window.
    exe (&columns / 2 - 1) . "wincmd |"
  endif

  " Add -quiet to avoid the intro message causing a hit-enter prompt.
  let gdb_args = get(a:dict, 'gdb_args', [])
  let proc_args = get(a:dict, 'proc_args', [])

  let cmd = [g:termdebugger, '-quiet', '--interpreter=mi2'] + gdb_args
  "call ch_log('executing "' . join(cmd) . '"')

  let s:gdbjob = jobstart(cmd, {
    \ 'on_exit': function('s:EndPromptDebug'),
    \ 'on_stdout': function('s:GdbOutCallback'),
    \ })
  if s:gdbjob == 0
    echoerr 'invalid argument (or job table is full) while starting gdb job'
    exe 'bwipe! ' . s:ptybuf
    return
  elseif s:gdbjob == -1
    echoerr 'Failed to start the gdb job'
    call s:CloseBuffers()
    return
  endif

  " Interpret commands while the target is running.  This should usually only
  " be exec-interrupt, since many commands don't work properly while the
  " target is running.
  call s:SendCommand('-gdb-set mi-async on')
  " Older gdb uses a different command.
  call s:SendCommand('-gdb-set target-async on')

  let s:ptybuf = 0
  if has('win32')
    " MS-Windows: run in a new console window for maximum compatibility
    call s:SendCommand('set new-console on')
  else
    " Unix: Run the debugged program in a terminal window.  Open it below the
    " gdb window.
    execute 'new'
    wincmd x | wincmd j
    belowright let s:pty_job_id = termopen('tail -f /dev/null;#gdb program')
    if s:pty_job_id == 0
      echoerr 'invalid argument (or job table is full) while opening terminal window'
      return
    elseif s:pty_job_id == -1
      echoerr 'Failed to open the program terminal window'
      return
    endif
    let pty_job_info = nvim_get_chan_info(s:pty_job_id)
    let s:ptybuf = pty_job_info['buffer']
    let pty = pty_job_info['pty']
    let s:ptywin = win_getid(winnr())
    call s:SendCommand('tty ' . pty)

    " Since GDB runs in a prompt window, the environment has not been set to
    " match a terminal window, need to do that now.
    call s:SendCommand('set env TERM = xterm-color')
    call s:SendCommand('set env ROWS = ' . winheight(s:ptywin))
    call s:SendCommand('set env LINES = ' . winheight(s:ptywin))
    call s:SendCommand('set env COLUMNS = ' . winwidth(s:ptywin))
    call s:SendCommand('set env COLORS = ' . &t_Co)
    call s:SendCommand('set env VIM_TERMINAL = ' . v:version)
  endif
  call s:SendCommand('set print pretty on')
  call s:SendCommand('set breakpoint pending on')
  " Disable pagination, it causes everything to stop at the gdb
  call s:SendCommand('set pagination off')

  " Set arguments to be run
  if len(proc_args)
    call s:SendCommand('set args ' . join(proc_args))
  endif

  call s:StartDebugCommon(a:dict)
  startinsert
endfunc

func s:StartDebugCommon(dict)
  " Sign used to highlight the line where the program has stopped.
  " There can be only one.
  sign define debugPC linehl=debugPC

  " Install debugger commands in the text window.
  call win_gotoid(s:sourcewin)
  call s:InstallCommands()
  call win_gotoid(s:gdbwin)

  " Contains breakpoints that have been placed, key is a string with the GDB
  " breakpoint number.
  " Each entry is a dict, containing the sub-breakpoints.  Key is the subid.
  " For a breakpoint that is just a number the subid is zero.
  " For a breakpoint "123.4" the id is "123" and subid is "4".
  " Example, when breakpoint "44", "123", "123.1" and "123.2" exist:
  " {'44': {'0': entry}, '123': {'0': entry, '1': entry, '2': entry}}
  let s:breakpoints = {}

  " Contains breakpoints by file/lnum.  The key is "fname:lnum".
  " Each entry is a list of breakpoint IDs at that position.
  let s:breakpoint_locations = {}

  augroup TermDebug
    au BufRead * call s:BufRead()
    au BufUnload * call s:BufUnloaded()
    au OptionSet background call s:Highlight(0, v:option_old, v:option_new)
  augroup END

  " Run the command if the bang attribute was given and got to the debug
  " window.
  if get(a:dict, 'bang', 0)
    call s:SendCommand('-exec-run')
    call win_gotoid(s:ptywin)
  endif
endfunc

" Send a command to gdb.  "cmd" is the string without line terminator.
func s:SendCommand(cmd)
  "call ch_log('sending to gdb: ' . a:cmd)
  if s:way == 'prompt'
    call chansend(s:gdbjob, a:cmd . "\n")
  else
    call chansend(s:comm_job_id, a:cmd . "\r")
  endif
endfunc

" This is global so that a user can create their mappings with this.
func TermDebugSendCommand(cmd)
  if s:way == 'prompt'
    call chansend(s:gdbjob, a:cmd . "\n")
  else
    let do_continue = 0
    if !s:stopped
      let do_continue = 1
      if s:way == 'prompt'
        " Need to send a signal to get the UI to listen.  Strangely this is only
        " needed once.
        call jobstop(s:gdbjob)
      else
        Stop
      endif
      sleep 10m
    endif
    call chansend(s:gdb_job_id, a:cmd . "\r")
    if do_continue
      Continue
    endif
  endif
endfunc

" Function called when entering a line in the prompt buffer.
func s:PromptCallback(text)
  call s:SendCommand(a:text)
endfunc

" Function called when pressing CTRL-C in the prompt buffer and when placing a
" breakpoint.
func s:PromptInterrupt()
  " call ch_log('Interrupting gdb')
  if has('win32')
    " Using job_stop() does not work on MS-Windows, need to send SIGTRAP to
    " the debugger program so that gdb responds again.
    if s:pid == 0
      echoerr 'Cannot interrupt gdb, did not find a process ID'
    else
      call debugbreak(s:pid)
    endif
  else
    call jobstop(s:gdbjob)
  endif
endfunc

" Function called when gdb outputs text.
func s:GdbOutCallback(job_id, msgs, event)
  "call ch_log('received from gdb: ' . a:text)

  " Drop the gdb prompt, we have our own.
  " Drop status and echo'd commands.
  call filter(a:msgs, { index, val ->
        \ val !=# '(gdb)' && val !=# '^done' && val[0] !=# '&'})

  let lines = []
  let index = 0

  for msg in a:msgs
    if msg =~ '^\^error,msg='
      if exists('s:evalexpr')
            \ && s:DecodeMessage(msg[11:])
            \    =~ 'A syntax error in expression, near\|No symbol .* in current context'
        " Silently drop evaluation errors.
        call remove(a:msgs, index)
        unlet s:evalexpr
        continue
      endif
    elseif msg[0] == '~'
      call add(lines, s:DecodeMessage(msg[1:]))
      call remove(a:msgs, index)
      continue
    endif
    let index += 1
  endfor

  let curwinid = win_getid(winnr())
  call win_gotoid(s:gdbwin)

  " Add the output above the current prompt.
  for line in lines
    call append(line('$') - 1, line)
  endfor
  if !empty(lines)
    set modified
  endif

  call win_gotoid(curwinid)
  call s:CommOutput(a:job_id, a:msgs, a:event)
endfunc

" Decode a message from gdb.  quotedText starts with a ", return the text up
" to the next ", unescaping characters.
func s:DecodeMessage(quotedText)
  if a:quotedText[0] != '"'
    echoerr 'DecodeMessage(): missing quote in ' . a:quotedText
    return
  endif
  let result = ''
  let i = 1
  while a:quotedText[i] != '"' && i < len(a:quotedText)
    if a:quotedText[i] == '\'
      let i += 1
      if a:quotedText[i] == 'n'
        " drop \n
        let i += 1
        continue
      elseif a:quotedText[i] == 't'
        " append \t
        let i += 1
        let result .= "\t"
        continue
      endif
    endif
    let result .= a:quotedText[i]
    let i += 1
  endwhile
  return result
endfunc

" Extract the "name" value from a gdb message with fullname="name".
func s:GetFullname(msg)
  if a:msg !~ 'fullname'
    return ''
  endif
  let name = s:DecodeMessage(substitute(a:msg, '.*fullname=', '', ''))
  if has('win32') && name =~ ':\\\\'
    " sometimes the name arrives double-escaped
    let name = substitute(name, '\\\\', '\\', 'g')
  endif
  return name
endfunc

" Extract the "addr" value from a gdb message with addr="0x0001234".
func s:GetAsmAddr(msg)
  if a:msg !~ 'addr='
    return ''
  endif
  let addr = s:DecodeMessage(substitute(a:msg, '.*addr=', '', ''))
  return addr
endfunc

function s:EndTermDebug(job_id, exit_code, event)
  if exists('#User#TermdebugStopPre')
    doauto <nomodeline> User TermdebugStopPre
  endif

  unlet s:gdbwin

  call s:EndDebugCommon()
endfunc

func s:EndDebugCommon()
  let curwinid = win_getid(winnr())

  if exists('s:ptybuf') && s:ptybuf
    exe 'bwipe! ' . s:ptybuf
  endif

  " Restore 'signcolumn' in all buffers for which it was set.
  call win_gotoid(s:sourcewin)
  let was_buf = bufnr()
  for bufnr in s:signcolumn_buflist
    if bufexists(bufnr)
      exe bufnr .. "buf"
      if exists('b:save_signcolumn')
        let &signcolumn = b:save_signcolumn
        unlet b:save_signcolumn
      endif
    endif
  endfor
  exe was_buf .. "buf"

  call s:DeleteCommands()

  call win_gotoid(curwinid)

  if s:save_columns > 0
    let &columns = s:save_columns
  endif

  if exists('#User#TermdebugStopPost')
    doauto <nomodeline> User TermdebugStopPost
  endif

  au! TermDebug
endfunc

func s:EndPromptDebug(job_id, exit_code, event)
  if exists('#User#TermdebugStopPre')
    doauto <nomodeline> User TermdebugStopPre
  endif

  let curwinid = win_getid(winnr())
  call win_gotoid(s:gdbwin)
  close
  if curwinid != s:gdbwin
    call win_gotoid(curwinid)
  endif

  call s:EndDebugCommon()
  unlet s:gdbwin
  "call ch_log("Returning from EndPromptDebug()")
endfunc

" - CommOutput: disassemble $pc
" - CommOutput: &"disassemble $pc\n"
" - CommOutput: ~"Dump of assembler code for function main(int, char**):\n"
" - CommOutput: ~"   0x0000555556466f69 <+0>:\tpush   rbp\n"
" ...
" - CommOutput: ~"   0x0000555556467cd0:\tpop    rbp\n"
" - CommOutput: ~"   0x0000555556467cd1:\tret    \n"
" - CommOutput: ~"End of assembler dump.\n"
" - CommOutput: ^done

" - CommOutput: disassemble $pc
" - CommOutput: &"disassemble $pc\n"
" - CommOutput: &"No function contains specified address.\n"
" - CommOutput: ^error,msg="No function contains specified address."
func s:HandleDisasmMsg(msg)
  if a:msg =~ '^\^done'
    let curwinid = win_getid(winnr())
    if win_gotoid(s:asmwin)
      silent normal! gg0"_dG
      call setline(1, s:asm_lines)
      set nomodified
      set filetype=asm

      let lnum = search('^' . s:asm_addr)
      if lnum != 0
        exe 'sign unplace ' . s:asm_id
        exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
      endif

      call win_gotoid(curwinid)
    endif

    let s:parsing_disasm_msg = 0
    let s:asm_lines = []
  elseif a:msg =~ '^\^error,msg='
    if s:parsing_disasm_msg == 1
      " Disassemble call ran into an error. This can happen when gdb can't
      " find the function frame address, so let's try to disassemble starting
      " at current PC
      call s:SendCommand('disassemble $pc,+100')
    endif
    let s:parsing_disasm_msg = 0
  elseif a:msg =~ '\&\"disassemble \$pc'
    if a:msg =~ '+100'
      " This is our second disasm attempt
      let s:parsing_disasm_msg = 2
    endif
  else
    let value = substitute(a:msg, '^\~\"[ ]*', '', '')
    let value = substitute(value, '^=>[ ]*', '', '')
    let value = substitute(value, '\\n\"\r$', '', '')
    let value = substitute(value, '\r', '', '')
    let value = substitute(value, '\\t', ' ', 'g')

    if value != '' || !empty(s:asm_lines)
      call add(s:asm_lines, value)
    endif
  endif
endfunc

func s:CommOutput(job_id, msgs, event)

  for msg in a:msgs
    " remove prefixed NL
    if msg[0] == "\n"
      let msg = msg[1:]
    endif

    if s:parsing_disasm_msg
      call s:HandleDisasmMsg(msg)
    elseif msg != ''
      if msg =~ '^\(\*stopped\|\*running\|=thread-selected\)'
        call s:HandleCursor(msg)
      elseif msg =~ '^\^done,bkpt=' || msg =~ '^=breakpoint-created,' || msg =~ '^=breakpoint-modified,'
        call s:HandleNewBreakpoint(msg)
      elseif msg =~ '^=breakpoint-deleted,'
        call s:HandleBreakpointDelete(msg)
      elseif msg =~ '^=thread-group-started'
        call s:HandleProgramRun(msg)
      elseif msg =~ '^\^done,value='
        call s:HandleEvaluate(msg)
      elseif msg =~ '^\^error,msg='
        call s:HandleError(msg)
      elseif msg =~ '^disassemble'
        let s:parsing_disasm_msg = 1
        let s:asm_lines = []
      endif
    endif
  endfor
endfunc

func s:GotoProgram()
  if has('win32')
    if executable('powershell')
      call system(printf('powershell -Command "add-type -AssemblyName microsoft.VisualBasic;[Microsoft.VisualBasic.Interaction]::AppActivate(%d);"', s:pid))
    endif
  else
    call win_gotoid(s:ptywin)
  endif
endfunc

" Install commands in the current window to control the debugger.
func s:InstallCommands()
  let save_cpo = &cpo
  set cpo&vim

  command -nargs=? Break call s:SetBreakpoint(<q-args>)
  command Clear call s:ClearBreakpoint()
  command Step call s:SendCommand('-exec-step')
  command Over call s:SendCommand('-exec-next')
  command Finish call s:SendCommand('-exec-finish')
  command -nargs=* Run call s:Run(<q-args>)
  command -nargs=* Arguments call s:SendCommand('-exec-arguments ' . <q-args>)

  if s:way == 'prompt'
    command Stop call s:PromptInterrupt()
    command Continue call s:SendCommand('continue')
  else
    command Stop call s:SendCommand('-exec-interrupt')
    " using -exec-continue results in CTRL-C in the gdb window not working,
    " communicating via commbuf (= use of SendCommand) has the same result
    "command Continue  call s:SendCommand('-exec-continue')
    command Continue call chansend(s:gdb_job_id, "continue\r")
  endif

  command -range -nargs=* Evaluate call s:Evaluate(<range>, <q-args>)
  command Gdb call win_gotoid(s:gdbwin)
  command Program call s:GotoProgram()
  command Source call s:GotoSourcewinOrCreateIt()
  command Asm call s:GotoAsmwinOrCreateIt()
  command Winbar call s:InstallWinbar()

  if !exists('g:termdebug_map_K') || g:termdebug_map_K
    " let s:k_map_saved = maparg('K', 'n', 0, 1)
    let s:k_map_saved = {}
    for map in nvim_get_keymap('n')
      if map.lhs ==# 'K'
        let s:k_map_saved = map
        break
      endif
    endfor
    nnoremap K :Evaluate<CR>
  endif

  let &cpo = save_cpo
endfunc

" let s:winbar_winids = []

" Install the window toolbar in the current window.
func s:InstallWinbar()
  " if has('menu') && &mouse != ''
  "   nnoremenu WinBar.Step   :Step<CR>
  "   nnoremenu WinBar.Next   :Over<CR>
  "   nnoremenu WinBar.Finish :Finish<CR>
  "   nnoremenu WinBar.Cont   :Continue<CR>
  "   nnoremenu WinBar.Stop   :Stop<CR>
  "   nnoremenu WinBar.Eval   :Evaluate<CR>
  "   call add(s:winbar_winids, win_getid(winnr()))
  " endif
endfunc

" Delete installed debugger commands in the current window.
func s:DeleteCommands()
  delcommand Break
  delcommand Clear
  delcommand Step
  delcommand Over
  delcommand Finish
  delcommand Run
  delcommand Arguments
  delcommand Stop
  delcommand Continue
  delcommand Evaluate
  delcommand Gdb
  delcommand Program
  delcommand Source
  delcommand Asm
  delcommand Winbar

  if exists('s:k_map_saved')
    if empty(s:k_map_saved)
      nunmap K
    else
      " call mapset('n', 0, s:k_map_saved)
      let mode = s:k_map_saved.mode !=# ' ' ? s:k_map_saved.mode : ''
      call nvim_set_keymap(mode, 'K', s:k_map_saved.rhs, {
        \ 'expr': s:k_map_saved.expr ? v:true : v:false,
        \ 'noremap': s:k_map_saved.noremap ? v:true : v:false,
        \ 'nowait': s:k_map_saved.nowait ? v:true : v:false,
        \ 'script': s:k_map_saved.script ? v:true : v:false,
        \ 'silent': s:k_map_saved.silent ? v:true : v:false,
        \ })
    endif
    unlet s:k_map_saved
  endif

  exe 'sign unplace ' . s:pc_id
  for [id, entries] in items(s:breakpoints)
    for subid in keys(entries)
      exe 'sign unplace ' . s:Breakpoint2SignNumber(id, subid)
    endfor
  endfor
  unlet s:breakpoints
  unlet s:breakpoint_locations

  sign undefine debugPC
  for val in s:BreakpointSigns
    exe "sign undefine debugBreakpoint" . val
  endfor
  let s:BreakpointSigns = []
endfunc

" :Break - Set a breakpoint at the cursor position.
func s:SetBreakpoint(at)
  " Setting a breakpoint may not work while the program is running.
  " Interrupt to make it work.
  let do_continue = 0
  if !s:stopped
    let do_continue = 1
    Stop
    sleep 10m
  endif

  " Use the fname:lnum format, older gdb can't handle --source.
  let at = empty(a:at) ?
  \ fnameescape(expand('%:p')) . ':' . line('.') : a:at
  call s:SendCommand('-break-insert ' . at)
  if do_continue
    Continue
  endif
endfunc

" :Clear - Delete a breakpoint at the cursor position.
func s:ClearBreakpoint()
  let fname = fnameescape(expand('%:p'))
  let lnum = line('.')
  let bploc = printf('%s:%d', fname, lnum)
  if has_key(s:breakpoint_locations, bploc)
    let idx = 0
    let nr = 0
    for id in s:breakpoint_locations[bploc]
      if has_key(s:breakpoints, id)
        " Assume this always works, the reply is simply "^done".
        call s:SendCommand('-break-delete ' . id)
        for subid in keys(s:breakpoints[id])
          exe 'sign unplace ' . s:Breakpoint2SignNumber(id, subid)
        endfor
        unlet s:breakpoints[id]
        unlet s:breakpoint_locations[bploc][idx]
        let nr = id
        break
      else
        let idx += 1
      endif
    endfor
    if nr != 0
      if empty(s:breakpoint_locations[bploc])
        unlet s:breakpoint_locations[bploc]
      endif
      echomsg 'Breakpoint ' . id . ' cleared from line ' . lnum . '.'
    else
      echoerr 'Internal error trying to remove breakpoint at line ' . lnum . '!'
    endif
  else
    echomsg 'No breakpoint to remove at line ' . lnum . '.'
  endif
endfunc

func s:Run(args)
  if a:args != ''
    call s:SendCommand('-exec-arguments ' . a:args)
  endif
  call s:SendCommand('-exec-run')
endfunc

func s:SendEval(expr)
  " check for "likely" boolean expressions, in which case we take it as lhs
  if a:expr =~ "[=!<>]="
    let exprLHS = a:expr
  else
    " remove text that is likely an assignment
    let exprLHS = substitute(a:expr, ' *=.*', '', '')
  endif

  " encoding expression to prevent bad errors
  let expr = a:expr
  let expr = substitute(expr, '\\', '\\\\', 'g')
  let expr = substitute(expr, '"', '\\"', 'g')
  call s:SendCommand('-data-evaluate-expression "' . expr . '"')
  let s:evalexpr = exprLHS
endfunc

" :Evaluate - evaluate what is specified / under the cursor
func s:Evaluate(range, arg)
  let expr = s:GetEvaluationExpression(a:range, a:arg)
  let s:ignoreEvalError = 0
  call s:SendEval(expr)
endfunc

" get what is specified / under the cursor 
func s:GetEvaluationExpression(range, arg)
  if a:arg != ''
    " user supplied evaluation
    let expr = s:CleanupExpr(a:arg)
    " DSW: replace "likely copy + paste" assignment
    let expr = substitute(expr, '"\([^"]*\)": *', '\1=', 'g')
  elseif a:range == 2
    let pos = getcurpos()
    let reg = getreg('v', 1, 1)
    let regt = getregtype('v')
    normal! gv"vy
    let expr = s:CleanupExpr(@v)
    call setpos('.', pos)
    call setreg('v', reg, regt)
    let s:evalFromBalloonExpr = 1
  else
    " no evaluation provided: get from C-expression under cursor
    " TODO: allow filetype specific lookup #9057
    let expr = expand('<cexpr>')
    let s:evalFromBalloonExpr = 1
  endif
  return expr
endfunc

" clean up expression that may got in because of range
" (newlines and surrounding whitespace)
func s:CleanupExpr(expr)
  " replace all embedded newlines/tabs/...
  let expr = substitute( a:expr, '\s', ' ', 'g')

  if &filetype ==# 'cobol'
    " extra cleanup for COBOL: _every: expression ends with a period,
    " a semicolon nmay be used instead of a space
    " a trailing comma is ignored as it commonly separates multiple expr
    let expr = substitute(expr, '\..*', '', '')
    let expr = substitute(expr, ';', ' ', 'g')
    let expr = substitute(expr, ',*$', '', '')
  endif

  " get rid of surrounding spaces
  let expr = substitute(expr, '^ *\(.*\) *', '\1', '')
  return expr
endfunc

let s:ignoreEvalError = 0
let s:evalFromBalloonExpr = 0
let s:evalFromBalloonExprResult = ''

" Handle the result of data-evaluate-expression
func s:HandleEvaluate(msg)
  let value = substitute(a:msg, '.*value="\(.*\)"', '\1', '')
  let value = substitute(value, '\\"', '"', 'g')
  let value = substitute(value, '
', '\1', '')
  if s:evalFromBalloonExpr
    if s:evalFromBalloonExprResult == ''
      let s:evalFromBalloonExprResult = s:evalexpr . ': ' . value
    else
      let s:evalFromBalloonExprResult .= ' = ' . value
    endif
    let s:evalFromBalloonExprResult = split(s:evalFromBalloonExprResult, '\\n')
    call s:OpenHoverPreview(s:evalFromBalloonExprResult, v:null)
    let s:evalFromBalloonExprResult = ''
  else
    echomsg '"' . s:evalexpr . '": ' . value
  endif

  if s:evalexpr[0] != '*' && value =~ '^0x' && value != '0x0' && value !~ '"$'
    " Looks like a pointer, also display what it points to.
    let s:ignoreEvalError = 1
    call s:SendEval('*' . s:evalexpr)
  else
    let s:evalFromBalloonExprResult = ''
  endif
endfunc

function! s:ShouldUseFloatWindow() abort
  if exists('*nvim_open_win') && (get(g:, 'termdebug_useFloatingHover', 1) == 1)
    return v:true
  else
    return v:false
  endif
endfunction

function! s:CloseFloatingHoverOnCursorMove(win_id, opened) abort
  if getpos('.') == a:opened
    " Just after opening floating window, CursorMoved event is run.
    " To avoid closing floating window immediately, check the cursor
    " was really moved
    return
  endif
  autocmd! nvim_termdebug_close_hover
  let winnr = win_id2win(a:win_id)
  if winnr == 0
    return
  endif
  call nvim_win_close(a:win_id, v:true)
endfunction

function! s:CloseFloatingHoverOnBufEnter(win_id, bufnr) abort
    let winnr = win_id2win(a:win_id)
    if winnr == 0
        " Float window was already closed
        autocmd! nvim_termdebug_close_hover
        return
    endif
    if winnr == winnr()
        " Cursor is moving into floating window. Do not close it
        return
    endif
    if bufnr('%') == a:bufnr
        " When current buffer opened hover window, it's not another buffer. Skipped
        return
    endif
    autocmd! nvim_termdebug_close_hover
    call nvim_win_close(a:win_id, v:true)
  endfunction

" Open preview window. Window is open in:
"   - Floating window on Neovim (0.4.0 or later)
"   - Preview window on Neovim (0.3.0 or earlier) or Vim
function! s:OpenHoverPreview(lines, filetype) abort
    " Use local variable since parameter is not modifiable
    let lines = a:lines
    let bufnr = bufnr('%')

    let use_float_win = s:ShouldUseFloatWindow()
    if use_float_win
      let pos = getpos('.')

      " Calculate width and height
      let width = 0
      for index in range(len(lines))
        let line = lines[index]
        let lw = strdisplaywidth(line)
        if lw > width
          let width = lw
        endif
        let lines[index] = line
      endfor

      let height = len(lines)

      " Calculate anchor
      " Prefer North, but if there is no space, fallback into South
      let bottom_line = line('w0') + winheight(0) - 1
      if pos[1] + height <= bottom_line
        let vert = 'N'
        let row = 1
      else
        let vert = 'S'
        let row = 0
      endif

      " Prefer West, but if there is no space, fallback into East
      if pos[2] + width <= &columns
        let hor = 'W'
        let col = 0
      else
        let hor = 'E'
        let col = 1
      endif

      let buf = nvim_create_buf(v:false, v:true)
      call nvim_buf_set_lines(buf, 0, -1, v:true, lines)
      " using v:true for second argument of nvim_open_win make the floating
      " window disappear
      let float_win_id = nvim_open_win(buf, v:false, {
            \   'relative': 'cursor',
            \   'anchor': vert . hor,
            \   'row': row,
            \   'col': col,
            \   'width': width,
            \   'height': height,
            \   'style': 'minimal',
            \ })

      if a:filetype isnot v:null
        call nvim_win_set_option(float_win_id, 'filetype', a:filetype)
      endif

      call nvim_buf_set_option(buf, 'modified', v:false)
      call nvim_buf_set_option(buf, 'modifiable', v:false)

      " Unlike preview window, :pclose does not close window. Instead, close
      " hover window automatically when cursor is moved.
      let call_after_move = printf('<SID>CloseFloatingHoverOnCursorMove(%d, %s)', float_win_id, string(pos))
      let call_on_bufenter = printf('<SID>CloseFloatingHoverOnBufEnter(%d, %d)', float_win_id, bufnr)
      augroup nvim_termdebug_close_hover
        execute 'autocmd CursorMoved,CursorMovedI,InsertEnter <buffer> call ' . call_after_move
        execute 'autocmd BufEnter * call ' . call_on_bufenter
      augroup END
    else
      echomsg a:lines[0]
    endif
endfunction

" Handle an error.
func s:HandleError(msg)
  if s:ignoreEvalError
    " Result of s:SendEval() failed, ignore.
    let s:ignoreEvalError = 0
    let s:evalFromBalloonExpr = 0
    return
  endif
  let msgVal = substitute(a:msg, '.*msg="\(.*\)"', '\1', '')
  echoerr substitute(msgVal, '\\"', '"', 'g')
endfunc

func s:GotoSourcewinOrCreateIt()
  if !win_gotoid(s:sourcewin)
    new
    let s:sourcewin = win_getid(winnr())
    call s:InstallWinbar()
  endif
endfunc

func s:GotoAsmwinOrCreateIt()
  if !win_gotoid(s:asmwin)
    if win_gotoid(s:sourcewin)
      exe 'rightbelow new'
    else
      exe 'new'
    endif

    let s:asmwin = win_getid(winnr())

    setlocal nowrap
    setlocal number
    setlocal noswapfile
    setlocal buftype=nofile
    setlocal modifiable

    let asmbuf = bufnr('Termdebug-asm-listing')
    if asmbuf > 0
      exe 'buffer' . asmbuf
    else
      exe 'file Termdebug-asm-listing'
    endif

    if exists('g:termdebug_disasm_window')
      if g:termdebug_disasm_window > 1
        exe 'resize ' . g:termdebug_disasm_window
      endif
    endif
  endif

  if s:asm_addr != ''
    let lnum = search('^' . s:asm_addr)
    if lnum == 0
      if s:stopped
        call s:SendCommand('disassemble $pc')
      endif
    else
      exe 'sign unplace ' . s:asm_id
      exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
    endif
  endif
endfunc

" Handle stopping and running message from gdb.
" Will update the sign that shows the current position.
func s:HandleCursor(msg)
  let wid = win_getid(winnr())

  if a:msg =~ '^\*stopped'
    "call ch_log('program stopped')
    let s:stopped = 1
  elseif a:msg =~ '^\*running'
    "call ch_log('program running')
    let s:stopped = 0
  endif

  if a:msg =~ 'fullname='
    let fname = s:GetFullname(a:msg)
  else
    let fname = ''
  endif

  if a:msg =~ 'addr='
    let asm_addr = s:GetAsmAddr(a:msg)
    if asm_addr != ''
      let s:asm_addr = asm_addr

      let curwinid = win_getid(winnr())
      if win_gotoid(s:asmwin)
      let lnum = search('^' . s:asm_addr)
      if lnum == 0
        call s:SendCommand('disassemble $pc')
      else
        exe 'sign unplace ' . s:asm_id
        exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
      endif

      call win_gotoid(curwinid)
      endif
    endif
  endif

  if a:msg =~ '^\(\*stopped\|=thread-selected\)' && filereadable(fname)
    let lnum = substitute(a:msg, '.*line="\([^"]*\)".*', '\1', '')
    if lnum =~ '^[0-9]*$'
      call s:GotoSourcewinOrCreateIt()
      if expand('%:p') != fnamemodify(fname, ':p')
        if &modified
          " TODO: find existing window
          exe 'split ' . fnameescape(fname)
          let s:sourcewin = win_getid(winnr())
          call s:InstallWinbar()
        else
          exe 'edit ' . fnameescape(fname)
        endif
      endif
      exe lnum
      normal! zv
      exe 'sign unplace ' . s:pc_id
      exe 'sign place ' . s:pc_id . ' line=' . lnum . ' name=debugPC file=' . fname
      if !exists('b:save_signcolumn')
        let b:save_signcolumn = &signcolumn
        call add(s:signcolumn_buflist, bufnr())
      endif
      setlocal signcolumn=yes
    endif
  elseif !s:stopped || fname != ''
    exe 'sign unplace ' . s:pc_id
  endif

  call win_gotoid(wid)
endfunc

let s:BreakpointSigns = []

func s:CreateBreakpoint(id, subid)
  let nr = printf('%d.%d', a:id, a:subid)
  if index(s:BreakpointSigns, nr) == -1
    call add(s:BreakpointSigns, nr)
    exe "sign define debugBreakpoint" . nr . " text=" . substitute(nr, '\..*', '', '') . " texthl=debugBreakpoint"
  endif
endfunc

func! s:SplitMsg(s)
  return split(a:s, '{.\{-}}\zs')
endfunction

" Handle setting a breakpoint
" Will update the sign that shows the breakpoint
func s:HandleNewBreakpoint(msg)
  if a:msg !~ 'fullname='
    " a watch or a pending breakpoint does not have a file name
    if a:msg =~ 'pending='
      let nr = substitute(a:msg, '.*number=\"\([0-9.]*\)\".*', '\1', '')
      let target = substitute(a:msg, '.*pending=\"\([^"]*\)\".*', '\1', '')
      echomsg 'Breakpoint ' . nr . ' (' . target  . ') pending.'
    endif
    return
  endif
  for msg in s:SplitMsg(a:msg)
    let fname = s:GetFullname(msg)
    if empty(fname)
      continue
    endif
    let nr = substitute(msg, '.*number="\([0-9.]*\)\".*', '\1', '')
    if empty(nr)
      return
    endif

    " If "nr" is 123 it becomes "123.0" and subid is "0".
    " If "nr" is 123.4 it becomes "123.4.0" and subid is "4"; "0" is discarded.
    let [id, subid; _] = map(split(nr . '.0', '\.'), 'v:val + 0')
    call s:CreateBreakpoint(id, subid)

    if has_key(s:breakpoints, id)
      let entries = s:breakpoints[id]
    else
      let entries = {}
      let s:breakpoints[id] = entries
    endif
    if has_key(entries, subid)
      let entry = entries[subid]
    else
      let entry = {}
      let entries[subid] = entry
    endif

    let lnum = substitute(msg, '.*line="\([^"]*\)".*', '\1', '')
    let entry['fname'] = fname
    let entry['lnum'] = lnum

    let bploc = printf('%s:%d', fname, lnum)
    if !has_key(s:breakpoint_locations, bploc)
      let s:breakpoint_locations[bploc] = []
    endif
    let s:breakpoint_locations[bploc] += [id]

    if bufloaded(fname)
      call s:PlaceSign(id, subid, entry)
    endif
    echomsg 'Breakpoint ' . nr . ' created at line ' . lnum . '.'
  endfor
endfunc

func s:PlaceSign(id, subid, entry)
  let nr = printf('%d.%d', a:id, a:subid)
  exe 'sign place ' . s:Breakpoint2SignNumber(a:id, a:subid) . ' line=' . a:entry['lnum'] . ' name=debugBreakpoint' . nr . ' priority=110 file=' . a:entry['fname']
  let a:entry['placed'] = 1
endfunc

" Handle deleting a breakpoint
" Will remove the sign that shows the breakpoint
func s:HandleBreakpointDelete(msg)
  let id = substitute(a:msg, '.*id="\([0-9]*\)\".*', '\1', '') + 0
  if empty(id)
    return
  endif
  if has_key(s:breakpoints, id)
    for [subid, entry] in items(s:breakpoints[id])
      if has_key(entry, 'placed')
        exe 'sign unplace ' . s:Breakpoint2SignNumber(id, subid)
        unlet entry['placed']
      endif
    endfor
    unlet s:breakpoints[id]
    echomsg 'Breakpoint ' . id . ' cleared.'
  endif
endfunc

" Handle the debugged program starting to run.
" Will store the process ID in s:pid
func s:HandleProgramRun(msg)
  let nr = substitute(a:msg, '.*pid="\([0-9]*\)\".*', '\1', '') + 0
  if nr == 0
    return
  endif
  let s:pid = nr
  "call ch_log('Detected process ID: ' . s:pid)
endfunc

" Handle a BufRead autocommand event: place any signs.
func s:BufRead()
  let fname = expand('<afile>:p')
  for [id, entries] in items(s:breakpoints)
    for [subid, entry] in items(entries)
      if entry['fname'] == fname
        call s:PlaceSign(id, subid, entry)
      endif
    endfor
  endfor
endfunc

" Handle a BufUnloaded autocommand event: unplace any signs.
func s:BufUnloaded()
  let fname = expand('<afile>:p')
  for [id, entries] in items(s:breakpoints)
    for [subid, entry] in items(entries)
      if entry['fname'] == fname
        let entry['placed'] = 0
      endif
    endfor
  endfor
endfunc

let &cpo = s:keepcpo
unlet s:keepcpo