neovim/test/functional/editor/put_spec.lua

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

961 lines
28 KiB
Lua
Raw Normal View History

local t = require('test.testutil')
local n = require('test.functional.testnvim')()
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
local Screen = require('test.functional.ui.screen')
local clear = n.clear
local insert = n.insert
local feed = n.feed
local expect = n.expect
local eq = t.eq
local map = vim.tbl_map
local filter = vim.tbl_filter
local feed_command = n.feed_command
local command = n.command
local curbuf_contents = n.curbuf_contents
local fn = n.fn
local dedent = t.dedent
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
local function reset()
command('bwipe! | new')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
insert([[
Line of words 1
Line of words 2]])
command('goto 1')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
feed('itest_string.<esc>u')
fn.setreg('a', 'test_stringa', 'V')
fn.setreg('b', 'test_stringb\ntest_stringb\ntest_stringb', 'b')
fn.setreg('"', 'test_string"', 'v')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
-- We check the last inserted register ". in each of these tests because it is
-- implemented completely differently in do_put().
-- It is implemented differently so that control characters and imap'ped
-- characters work in the same manner when pasted as when inserted.
describe('put command', function()
clear()
before_each(reset)
local function visual_marks_zero()
for _, v in pairs(fn.getpos("'<")) do
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
if v ~= 0 then
return false
end
end
for _, v in pairs(fn.getpos("'>")) do
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
if v ~= 0 then
return false
end
end
return true
end
-- {{{ Where test definitions are run
local function run_test_variations(test_variations, extra_setup)
reset()
if extra_setup then
extra_setup()
end
local init_contents = curbuf_contents()
local init_cursorpos = fn.getcurpos()
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
local assert_no_change = function(exception_table, after_undo)
expect(init_contents)
-- When putting the ". register forwards, undo doesn't move
-- the cursor back to where it was before.
-- This is because it uses the command character 'a' to
-- start the insert, and undo after that leaves the cursor
-- one place to the right (unless we were at the end of the
-- line when we pasted).
if not (exception_table.undo_position and after_undo) then
eq(init_cursorpos, fn.getcurpos())
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
end
for _, test in pairs(test_variations) do
it(test.description, function()
if extra_setup then
extra_setup()
end
local orig_dotstr = fn.getreg('.')
t.ok(visual_marks_zero())
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
-- Make sure every test starts from the same conditions
assert_no_change(test.exception_table, false)
local was_cli = test.test_action()
test.test_assertions(test.exception_table, false)
-- Check that undo twice puts us back to the original conditions
-- (i.e. puts the cursor and text back to before)
feed('u')
assert_no_change(test.exception_table, true)
-- Should not have changed the ". register
-- If we paste the ". register with a count we can't avoid
-- changing this register, hence avoid this check.
if not test.exception_table.dot_reg_changed then
eq(orig_dotstr, fn.getreg('.'))
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
-- Doing something, undoing it, and then redoing it should
-- leave us in the same state as just doing it once.
-- For :ex actions we want '@:', for normal actions we want '.'
-- The '.' redo doesn't work for visual put so just exit if
-- it was tested.
-- We check that visual put was used by checking if the '< and
-- '> marks were changed.
if not visual_marks_zero() then
return
end
if test.exception_table.undo_position then
fn.setpos('.', init_cursorpos)
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
if was_cli then
feed('@:')
else
feed('.')
end
test.test_assertions(test.exception_table, true)
end)
end
end -- run_test_variations()
-- }}}
local function create_test_defs(
test_defs,
command_base,
command_creator, -- {{{
expect_base,
expect_creator
)
local rettab = {}
local exceptions
for _, v in pairs(test_defs) do
if v[4] then
exceptions = v[4]
else
exceptions = {}
end
table.insert(rettab, {
test_action = command_creator(command_base, v[1]),
test_assertions = expect_creator(expect_base, v[2]),
description = v[3],
exception_table = exceptions,
})
end
return rettab
end -- create_test_defs() }}}
local function find_cursor_position(expect_string) -- {{{
-- There must only be one occurrence of the character 'x' in
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
-- expect_string.
-- This function removes that occurrence, and returns the position that
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
-- it was in.
-- This returns the cursor position that would leave the 'x' in that
-- place if we feed 'ix<esc>' and the string existed before it.
for linenum, line in pairs(fn.split(expect_string, '\n', 1)) do
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
local column = line:find('x')
if column then
return { linenum, column }, expect_string:gsub('x', '')
end
end
end -- find_cursor_position() }}}
-- Action function creators {{{
local function create_p_action(test_map, substitution)
local temp_val = test_map:gsub('p', substitution)
return function()
feed(temp_val)
return false
end
end
local function create_put_action(command_base, substitution)
local temp_val = command_base:gsub('put', substitution)
return function()
feed_command(temp_val)
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
return true
end
end
-- }}}
-- Expect function creator {{{
local function expect_creator(conversion_function, expect_base, conversion_table)
local temp_expect_string = conversion_function(expect_base, conversion_table)
local cursor_position, expect_string = find_cursor_position(temp_expect_string)
return function(exception_table, after_redo)
expect(expect_string)
-- Have to use getcurpos() instead of api.nvim_win_get_cursor(0) in
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
-- order to account for virtualedit.
-- We always want the curswant element in getcurpos(), which is
-- sometimes different to the column element in
-- api.nvim_win_get_cursor(0).
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
-- NOTE: The ".gp command leaves the cursor after the pasted text
-- when running, but does not when the command is redone with the
-- '.' command.
if not (exception_table.redo_position and after_redo) then
local actual_position = fn.getcurpos()
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
eq(cursor_position, { actual_position[2], actual_position[5] })
end
end
end -- expect_creator() }}}
-- Test definitions {{{
local function copy_def(def)
local rettab = { '', {}, '', nil }
rettab[1] = def[1]
for k, v in pairs(def[2]) do
rettab[2][k] = v
end
rettab[3] = def[3]
if def[4] then
rettab[4] = {}
for k, v in pairs(def[4]) do
rettab[4][k] = v
end
end
return rettab
end
local normal_command_defs = {
{
'p',
{ cursor_after = false, put_backwards = false, dot_register = false },
'pastes after cursor with p',
},
{
'gp',
{ cursor_after = true, put_backwards = false, dot_register = false },
'leaves cursor after text with gp',
},
{
'".p',
{ cursor_after = false, put_backwards = false, dot_register = true },
'works with the ". register',
},
{
'".gp',
{ cursor_after = true, put_backwards = false, dot_register = true },
'gp works with the ". register',
{ redo_position = true },
},
{
'P',
{ cursor_after = false, put_backwards = true, dot_register = false },
'pastes before cursor with P',
},
{
'gP',
{ cursor_after = true, put_backwards = true, dot_register = false },
'gP pastes before cursor and leaves cursor after text',
},
{
'".P',
{ cursor_after = false, put_backwards = true, dot_register = true },
'P works with ". register',
},
{
'".gP',
{ cursor_after = true, put_backwards = true, dot_register = true },
'gP works with ". register',
{ redo_position = true },
},
}
-- Add a definition applying a count for each definition above.
-- Could do this for each transformation (p -> P, p -> gp etc), but I think
-- it's neater this way (balance between being explicit and too verbose).
for i = 1, #normal_command_defs do
local cur = normal_command_defs[i]
-- Make modified copy of current definition that includes a count.
local newdef = copy_def(cur)
newdef[2].count = 2
cur[2].count = 1
newdef[1] = '2' .. newdef[1]
newdef[3] = 'double ' .. newdef[3]
if cur[2].dot_register then
if not cur[4] then
newdef[4] = {}
end
newdef[4].dot_reg_changed = true
end
normal_command_defs[#normal_command_defs + 1] = newdef
end
local ex_command_defs = {
{
'put',
{ put_backwards = false, dot_register = false },
'pastes linewise forwards with :put',
},
{
'put!',
{ put_backwards = true, dot_register = false },
'pastes linewise backwards with :put!',
},
{
'put .',
{ put_backwards = false, dot_register = true },
'pastes linewise with the dot register',
},
{
'put! .',
{ put_backwards = true, dot_register = true },
'pastes linewise backwards with the dot register',
},
}
local function non_dotdefs(def_table)
return filter(function(d)
return not d[2].dot_register
end, def_table)
end
-- }}}
-- Conversion functions {{{
local function convert_charwise(expect_base, conversion_table, virtualedit_end, visual_put)
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
expect_base = dedent(expect_base)
-- There is no difference between 'P' and 'p' when VIsual_active
if not visual_put then
if conversion_table.put_backwards then
-- Special case for virtualedit at the end of a line.
local replace_string
if not virtualedit_end then
replace_string = 'test_stringx"%1'
else
replace_string = 'test_stringx"'
end
expect_base = expect_base:gsub('(.)test_stringx"', replace_string)
end
end
if conversion_table.count > 1 then
local rep_string = 'test_string"'
local extra_puts = rep_string:rep(conversion_table.count - 1)
expect_base = expect_base:gsub('test_stringx"', extra_puts .. 'test_stringx"')
end
if conversion_table.cursor_after then
expect_base = expect_base:gsub('test_stringx"', 'test_string"x')
end
if conversion_table.dot_register then
expect_base = expect_base:gsub('(test_stringx?)"', '%1.')
end
return expect_base
end -- convert_charwise()
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
local function make_back(string)
local prev_line
local rettab = {}
local string_found = false
for _, line in pairs(fn.split(string, '\n', 1)) do
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
if line:find('test_string') then
string_found = true
table.insert(rettab, line)
else
if string_found then
if prev_line then
table.insert(rettab, prev_line)
prev_line = nil
end
table.insert(rettab, line)
else
table.insert(rettab, prev_line)
prev_line = line
end
end
end
-- In case there are no lines after the text that was put.
if prev_line and string_found then
table.insert(rettab, prev_line)
end
return table.concat(rettab, '\n')
end -- make_back()
local function convert_linewise(expect_base, conversion_table, _, use_a, indent)
expect_base = dedent(expect_base)
if conversion_table.put_backwards then
expect_base = make_back(expect_base)
end
local p_str = 'test_string"'
if use_a then
p_str = 'test_stringa'
end
if conversion_table.dot_register then
expect_base = expect_base:gsub('x' .. p_str, 'xtest_string.')
p_str = 'test_string.'
end
if conversion_table.cursor_after then
expect_base = expect_base:gsub('x' .. p_str .. '\n', p_str .. '\nx')
end
-- The 'indent' argument is only used here because a single put with an
-- indent doesn't require special handling. It doesn't require special
-- handling because the cursor is never put before the indent, hence
-- the modification of 'test_stringx"' gives the same overall answer as
-- modifying ' test_stringx"'.
-- Only happens when using normal mode command actions.
if conversion_table.count and conversion_table.count > 1 then
if not indent then
indent = ''
end
local rep_string = indent .. p_str .. '\n'
local extra_puts = rep_string:rep(conversion_table.count - 1)
local orig_string, new_string
if conversion_table.cursor_after then
orig_string = indent .. p_str .. '\nx'
new_string = extra_puts .. orig_string
else
orig_string = indent .. 'x' .. p_str .. '\n'
new_string = orig_string .. extra_puts
end
expect_base = expect_base:gsub(orig_string, new_string)
end
return expect_base
end
local function put_x_last(orig_line, p_str)
local prev_end, cur_end, cur_start = 0, 0, 0
while cur_start do
prev_end = cur_end
cur_start, cur_end = orig_line:find(p_str, prev_end)
end
-- Assume (because that is the only way I call it) that p_str matches
-- the pattern 'test_string.'
return orig_line:sub(1, prev_end - 1) .. 'x' .. orig_line:sub(prev_end)
end
local function convert_blockwise(
expect_base,
conversion_table,
visual,
use_b,
trailing_whitespace
)
expect_base = dedent(expect_base)
local p_str = 'test_string"'
if use_b then
p_str = 'test_stringb'
end
if conversion_table.dot_register then
expect_base = expect_base:gsub('(x?)' .. p_str, '%1test_string.')
-- Looks strange, but the dot is a special character in the pattern
-- and a literal character in the replacement.
expect_base = expect_base:gsub('test_stringx.', 'test_stringx.')
p_str = 'test_string.'
end
-- No difference between 'p' and 'P' in visual mode.
if not visual then
if conversion_table.put_backwards then
-- One for the line where the cursor is left, one for all other
-- lines.
expect_base = expect_base:gsub('([^x])' .. p_str, p_str .. '%1')
expect_base = expect_base:gsub('([^x])x' .. p_str, 'x' .. p_str .. '%1')
if not trailing_whitespace then
expect_base = expect_base:gsub(' \n', '\n')
expect_base = expect_base:gsub(' $', '')
end
end
end
if conversion_table.count and conversion_table.count > 1 then
local p_pattern = p_str:gsub('%.', '%%.')
expect_base = expect_base:gsub(p_pattern, p_str:rep(conversion_table.count))
expect_base =
expect_base:gsub('test_stringx([b".])', p_str:rep(conversion_table.count - 1) .. '%0')
end
if conversion_table.cursor_after then
if not visual then
local prev_line
local rettab = {}
local prev_in_block = false
for _, line in pairs(fn.split(expect_base, '\n', 1)) do
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
if line:find('test_string') then
if prev_line then
prev_line = prev_line:gsub('x', '')
table.insert(rettab, prev_line)
end
prev_line = line
prev_in_block = true
else
if prev_in_block then
prev_line = put_x_last(prev_line, p_str)
table.insert(rettab, prev_line)
prev_in_block = false
end
table.insert(rettab, line)
end
end
if prev_line and prev_in_block then
table.insert(rettab, put_x_last(prev_line, p_str))
end
expect_base = table.concat(rettab, '\n')
else
expect_base = expect_base:gsub('x(.)', '%1x')
end
end
return expect_base
end
-- }}}
-- Convenience functions {{{
local function run_normal_mode_tests(
test_string,
base_map,
extra_setup,
virtualedit_end,
selection_string
)
local function convert_closure(e, c)
return convert_charwise(e, c, virtualedit_end, selection_string)
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
local function expect_normal_creator(expect_base, conversion_table)
local test_expect = expect_creator(convert_closure, expect_base, conversion_table)
return function(exception_table, after_redo)
test_expect(exception_table, after_redo)
if selection_string then
if not conversion_table.put_backwards then
eq(selection_string, fn.getreg('"'))
end
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
else
eq('test_string"', fn.getreg('"'))
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
end
end
run_test_variations(
create_test_defs(
normal_command_defs,
base_map,
create_p_action,
test_string,
expect_normal_creator
),
extra_setup
)
end -- run_normal_mode_tests()
local function convert_linewiseer(expect_base, conversion_table)
return expect_creator(convert_linewise, expect_base, conversion_table)
end
local function run_linewise_tests(expect_base, base_command, extra_setup)
local linewise_test_defs = create_test_defs(
ex_command_defs,
base_command,
create_put_action,
expect_base,
convert_linewiseer
)
run_test_variations(linewise_test_defs, extra_setup)
end -- run_linewise_tests()
-- }}}
-- Actual tests
describe('default pasting', function()
local expect_string = [[
Ltest_stringx"ine of words 1
Line of words 2]]
run_normal_mode_tests(expect_string, 'p')
run_linewise_tests(
[[
Line of words 1
xtest_string"
Line of words 2]],
'put'
)
end)
describe('linewise register', function()
-- put with 'p'
local local_ex_command_defs = non_dotdefs(normal_command_defs)
local base_expect_string = [[
Line of words 1
xtest_stringa
Line of words 2]]
local function local_convert_linewise(expect_base, conversion_table)
return convert_linewise(expect_base, conversion_table, nil, true)
end
local function expect_lineput(expect_base, conversion_table)
return expect_creator(local_convert_linewise, expect_base, conversion_table)
end
run_test_variations(
create_test_defs(
local_ex_command_defs,
'"ap',
create_p_action,
base_expect_string,
expect_lineput
)
)
-- put with :put
local linewise_put_defs = non_dotdefs(ex_command_defs)
base_expect_string = [[
Line of words 1
xtest_stringa
Line of words 2]]
run_test_variations(
create_test_defs(
linewise_put_defs,
'put a',
create_put_action,
base_expect_string,
convert_linewiseer
)
)
end)
describe('blockwise register', function()
local blockwise_put_defs = non_dotdefs(normal_command_defs)
local test_base = [[
Lxtest_stringbine of words 1
Ltest_stringbine of words 2
test_stringb]]
local function expect_block_creator(expect_base, conversion_table)
return expect_creator(function(e, c)
return convert_blockwise(e, c, nil, true)
end, expect_base, conversion_table)
end
run_test_variations(
create_test_defs(blockwise_put_defs, '"bp', create_p_action, test_base, expect_block_creator)
)
end)
it('adds correct indentation when put with [p and ]p', function()
feed('G>>"a]pix<esc>')
-- luacheck: ignore
expect([[
Line of words 1
Line of words 2
xtest_stringa]])
feed('uu"a[pix<esc>')
-- luacheck: ignore
expect([[
Line of words 1
xtest_stringa
Line of words 2]])
end)
describe('linewise paste with autoindent', function()
-- luacheck: ignore
run_linewise_tests(
[[
Line of words 1
Line of words 2
xtest_string"]],
'put',
function()
fn.setline('$', ' Line of words 2')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
-- Set curswant to '8' to be at the end of the tab character
-- This is where the cursor is put back after the 'u' command.
fn.setpos('.', { 0, 2, 1, 0, 8 })
command('set autoindent')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
)
end)
describe('put inside tabs with virtualedit', function()
local test_string = [[
Line of words 1
test_stringx" Line of words 2]]
run_normal_mode_tests(test_string, 'p', function()
fn.setline('$', ' Line of words 2')
command('setlocal virtualedit=all')
fn.setpos('.', { 0, 2, 1, 2, 3 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end)
end)
describe('put after the line with virtualedit', function()
-- luacheck: ignore 621
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
local test_string = [[
Line of words 1 test_stringx"
Line of words 2]]
run_normal_mode_tests(test_string, 'p', function()
fn.setline('$', ' Line of words 2')
command('setlocal virtualedit=all')
fn.setpos('.', { 0, 1, 16, 1, 17 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end, true)
end)
describe('Visual put', function()
describe('basic put', function()
local test_string = [[
test_stringx" words 1
Line of words 2]]
run_normal_mode_tests(test_string, 'v2ep', nil, nil, 'Line of')
end)
describe('over trailing newline', function()
local test_string = 'Line of test_stringx"Line of words 2'
run_normal_mode_tests(test_string, 'v$p', function()
fn.setpos('.', { 0, 1, 9, 0, 9 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end, nil, 'words 1\n')
end)
describe('linewise mode', function()
local test_string = [[
xtest_string"
Line of words 2]]
local function expect_vis_linewise(expect_base, conversion_table)
return expect_creator(function(e, c)
return convert_linewise(e, c, nil, nil)
end, expect_base, conversion_table)
end
run_test_variations(
create_test_defs(
normal_command_defs,
'Vp',
create_p_action,
test_string,
expect_vis_linewise
),
function()
fn.setpos('.', { 0, 1, 1, 0, 1 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
)
describe('with whitespace at bol', function()
local function expect_vis_lineindented(expect_base, conversion_table)
local test_expect = expect_creator(function(e, c)
return convert_linewise(e, c, nil, nil, ' ')
end, expect_base, conversion_table)
return function(exception_table, after_redo)
test_expect(exception_table, after_redo)
if not conversion_table.put_backwards then
eq('Line of words 1\n', fn.getreg('"'))
end
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
end
local base_expect_string = [[
xtest_string"
Line of words 2]]
run_test_variations(
create_test_defs(
normal_command_defs,
'Vp',
create_p_action,
base_expect_string,
expect_vis_lineindented
),
function()
feed('i test_string.<esc>u')
fn.setreg('"', ' test_string"', 'v')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
)
end)
end)
describe('blockwise visual mode', function()
local test_base = [[
test_stringx"e of words 1
test_string"e of words 2]]
local function expect_block_creator(expect_base, conversion_table)
local test_expect = expect_creator(function(e, c)
return convert_blockwise(e, c, true)
end, expect_base, conversion_table)
return function(e, c)
test_expect(e, c)
if not conversion_table.put_backwards then
eq('Lin\nLin', fn.getreg('"'))
end
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
end
local select_down_test_defs = create_test_defs(
normal_command_defs,
'<C-v>jllp',
create_p_action,
test_base,
expect_block_creator
)
run_test_variations(select_down_test_defs)
-- Undo and redo of a visual block put leave the cursor in the top
-- left of the visual block area no matter where the cursor was
-- when it started.
local undo_redo_no = map(function(table)
local rettab = copy_def(table)
if not rettab[4] then
rettab[4] = {}
end
rettab[4].undo_position = true
rettab[4].redo_position = true
return rettab
end, normal_command_defs)
-- Selection direction doesn't matter
run_test_variations(
create_test_defs(
undo_redo_no,
'<C-v>kllp',
create_p_action,
test_base,
expect_block_creator
),
function()
fn.setpos('.', { 0, 2, 1, 0, 1 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
)
describe('blockwise cursor after undo', function()
-- A bit of a hack of the reset above.
-- In the tests that selection direction doesn't matter, we
-- don't check the undo/redo position because it doesn't fit
-- the same pattern as everything else.
-- Here we fix this by directly checking the undo/redo position
-- in the test_assertions of our test definitions.
local function assertion_creator(_, _)
return function(_, _)
feed('u')
-- Have to use feed('u') here to set curswant, because
-- ex_undo() doesn't do that.
eq({ 0, 1, 1, 0, 1 }, fn.getcurpos())
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
feed('<C-r>')
eq({ 0, 1, 1, 0, 1 }, fn.getcurpos())
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
end
run_test_variations(
create_test_defs(undo_redo_no, '<C-v>kllp', create_p_action, test_base, assertion_creator),
function()
fn.setpos('.', { 0, 2, 1, 0, 1 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
)
end)
end)
describe("with 'virtualedit'", function()
describe('splitting a tab character', function()
local base_expect_string = [[
Line of words 1
test_stringx" Line of words 2]]
run_normal_mode_tests(base_expect_string, 'vp', function()
fn.setline('$', ' Line of words 2')
command('setlocal virtualedit=all')
fn.setpos('.', { 0, 2, 1, 2, 3 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end, nil, ' ')
end)
describe('after end of line', function()
local base_expect_string = [[
Line of words 1 test_stringx"
Line of words 2]]
run_normal_mode_tests(base_expect_string, 'vp', function()
command('setlocal virtualedit=all')
fn.setpos('.', { 0, 1, 16, 2, 18 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end, true, ' ')
end)
end)
end)
describe('. register special tests', function()
-- luacheck: ignore 621
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
before_each(reset)
it('applies control character actions', function()
feed('i<C-t><esc>u')
expect([[
Line of words 1
Line of words 2]])
feed('".p')
expect([[
Line of words 1
Line of words 2]])
feed('u1go<C-v>j".p')
eq(
[[
ine of words 1
ine of words 2]],
curbuf_contents()
2024-01-02 18:09:18 -07:00
)
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end)
local screen
setup(function()
screen = Screen.new()
end)
local function bell_test(actions, should_ring)
if should_ring then
-- check bell is not set by nvim before the action
screen:sleep(50)
end
t.ok(not screen.bell and not screen.visualbell)
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
actions()
screen:expect {
condition = function()
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
if should_ring then
if not screen.bell and not screen.visualbell then
error('Bell was not rung after action')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
else
if screen.bell or screen.visualbell then
error('Bell was rung after action')
2024-01-02 18:09:18 -07:00
end
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
end,
unchanged = not should_ring,
}
screen.bell = false
screen.visualbell = false
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end
it('should not ring the bell with gp at end of line', function()
bell_test(function()
feed('$".gp')
end)
-- Even if the last character is a multibyte character.
reset()
fn.setline(1, 'helloม')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
bell_test(function()
feed('$".gp')
end)
end)
it('should not ring the bell with gp and end of file', function()
fn.setpos('.', { 0, 2, 1, 0 })
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
bell_test(function()
feed('$vl".gp')
end)
end)
it('should ring the bell when deleting if not appropriate', function()
command('goto 2')
feed('i<bs><esc>')
expect([[
ine of words 1
Line of words 2]])
bell_test(function()
feed('".P')
end, true)
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end)
it('should restore cursor position after undo of ".p', function()
local origpos = fn.getcurpos()
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
feed('".pu')
eq(origpos, fn.getcurpos())
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
end)
it("should be unaffected by 'autoindent' with V\".2p", function()
command('set autoindent')
put fixup, esp. ". register close #5709 #5781 Note some bugs were judged to have too ugly a fix to solve, tests to demonstrate these problems, and the explanation behind not fixing them are below. describe('register . problems', function() before_each(reset) -- The difficulty here is: The basic requirement is that the text -- inserted is treated as if it were typed in insert mode. This is why -- the paste method is to enter insert mode and enter the ". register -- into readbuf1. -- We can't add a count into the readbuf here because the insert mode -- count is implemented with readbuf2 which is checked for characters -- after readbuf1. -- Hence, the ".gp command (which adds extra characters into readbuf1 -- to emulate leaving the cursor after the text by moving the cursor -- after inserting the text) would insert the motion characters into -- the buffer instead of using them to move after the insert has been -- done. -- I could probably get this working properly with a special flag put -- into start_redo_ins() and set in do_put(), but I think this adds -- much more complexity than fixing this bug justifies. pending('should not change the ". register with ".2p', function() local orig_register = funcs.getreg('.') feed('2".p') eq(orig_register, funcs.getreg('.')) end) describe("cursor positioning after undo and redo with '.'", function() before_each(reset) local function make_cursor_test(macro_string) return function() feed(macro_string) local afterpos = funcs.getcurpos() local orig_string = curbuf_contents() feed('u.') eq(afterpos, funcs.getcurpos()) expect(orig_string) end end -- The difficulty here is: setting the cursor after the end of the -- pasted text is done by adding a motion command to the -- stuffbuffer after the insert. -- Modifying 'redobuff' is done in the code that handles inserting -- text and moving around. -- I could add a special case in ins_esc() that checks for a flag -- set in do_put() to add the motion character to the redo buffer, -- but I think that is starting to get way too convoluted for the -- benefit. pending('should be the same after ".gp and ".gpu.', make_cursor_test('".gp')) -- The difficulty here is: putting forwards is implemented by using -- 'a' instead of 'i' to start insert. -- Undoing with 'u' an insert that began with 'a' leaves the cursor -- where the first character was inserted, not where the cursor was -- when the 'a' was pressed. -- We account for this the first time by saving the cursor position -- in do_put(), but this isn't stored in redobuff for a second time -- around. -- We can't change how such a fundamental action as undo after -- inserting with 'a' behaves, we could add in a special case -- whereby we set a flag in do_put() and read it when entering -- insert mode but this seems like way too much to fix such a minor -- bug. pending('should be the same after ".pu. and ".pu.u.', make_cursor_test('".pu.')) end) end)
2016-12-12 07:04:44 -07:00
feed('i test_string.<esc>u')
feed('V".2p')
expect([[
test_string.
test_string.
Line of words 2]])
end)
end)
end)