2024-04-20 08:44:13 -07:00
|
|
|
local t = require('test.testutil')
|
|
|
|
local n = require('test.functional.testnvim')()
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local Screen = require('test.functional.ui.screen')
|
|
|
|
|
2024-04-20 08:44:13 -07:00
|
|
|
local clear = n.clear
|
|
|
|
local insert = n.insert
|
|
|
|
local feed = n.feed
|
|
|
|
local expect = n.expect
|
2024-04-08 02:03:20 -07:00
|
|
|
local eq = t.eq
|
2024-01-12 04:28:20 -07:00
|
|
|
local map = vim.tbl_map
|
|
|
|
local filter = vim.tbl_filter
|
2024-04-20 08:44:13 -07:00
|
|
|
local feed_command = n.feed_command
|
|
|
|
local command = n.command
|
|
|
|
local curbuf_contents = n.curbuf_contents
|
|
|
|
local fn = n.fn
|
2024-04-08 02:03:20 -07:00
|
|
|
local dedent = t.dedent
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
|
|
|
|
local function reset()
|
2023-04-06 18:29:12 -07:00
|
|
|
command('bwipe! | new')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
insert([[
|
|
|
|
Line of words 1
|
|
|
|
Line of words 2]])
|
2023-04-06 18:29:12 -07:00
|
|
|
command('goto 1')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
feed('itest_string.<esc>u')
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setreg('a', 'test_stringa', 'V')
|
|
|
|
fn.setreg('b', 'test_stringb\ntest_stringb\ntest_stringb', 'b')
|
|
|
|
fn.setreg('"', 'test_string"', 'v')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
|
|
|
|
-- We check the last inserted register ". in each of these tests because it is
|
|
|
|
-- implemented completely differently in do_put().
|
|
|
|
-- It is implemented differently so that control characters and imap'ped
|
|
|
|
-- characters work in the same manner when pasted as when inserted.
|
|
|
|
describe('put command', function()
|
|
|
|
clear()
|
|
|
|
before_each(reset)
|
|
|
|
|
|
|
|
local function visual_marks_zero()
|
2024-01-12 10:59:57 -07:00
|
|
|
for _, v in pairs(fn.getpos("'<")) do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
if v ~= 0 then
|
|
|
|
return false
|
|
|
|
end
|
|
|
|
end
|
2024-01-12 10:59:57 -07:00
|
|
|
for _, v in pairs(fn.getpos("'>")) do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
if v ~= 0 then
|
|
|
|
return false
|
|
|
|
end
|
|
|
|
end
|
|
|
|
return true
|
|
|
|
end
|
|
|
|
|
|
|
|
-- {{{ Where test definitions are run
|
|
|
|
local function run_test_variations(test_variations, extra_setup)
|
|
|
|
reset()
|
2024-01-02 18:09:18 -07:00
|
|
|
if extra_setup then
|
|
|
|
extra_setup()
|
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local init_contents = curbuf_contents()
|
2024-01-12 10:59:57 -07:00
|
|
|
local init_cursorpos = fn.getcurpos()
|
2024-01-02 18:09:18 -07:00
|
|
|
local assert_no_change = function(exception_table, after_undo)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
expect(init_contents)
|
|
|
|
-- When putting the ". register forwards, undo doesn't move
|
|
|
|
-- the cursor back to where it was before.
|
|
|
|
-- This is because it uses the command character 'a' to
|
|
|
|
-- start the insert, and undo after that leaves the cursor
|
|
|
|
-- one place to the right (unless we were at the end of the
|
|
|
|
-- line when we pasted).
|
|
|
|
if not (exception_table.undo_position and after_undo) then
|
2024-01-12 10:59:57 -07:00
|
|
|
eq(init_cursorpos, fn.getcurpos())
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
end
|
|
|
|
|
|
|
|
for _, test in pairs(test_variations) do
|
|
|
|
it(test.description, function()
|
2024-01-02 18:09:18 -07:00
|
|
|
if extra_setup then
|
|
|
|
extra_setup()
|
|
|
|
end
|
2024-01-12 10:59:57 -07:00
|
|
|
local orig_dotstr = fn.getreg('.')
|
2024-04-08 02:03:20 -07:00
|
|
|
t.ok(visual_marks_zero())
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
-- Make sure every test starts from the same conditions
|
|
|
|
assert_no_change(test.exception_table, false)
|
|
|
|
local was_cli = test.test_action()
|
|
|
|
test.test_assertions(test.exception_table, false)
|
|
|
|
-- Check that undo twice puts us back to the original conditions
|
|
|
|
-- (i.e. puts the cursor and text back to before)
|
|
|
|
feed('u')
|
|
|
|
assert_no_change(test.exception_table, true)
|
|
|
|
|
|
|
|
-- Should not have changed the ". register
|
|
|
|
-- If we paste the ". register with a count we can't avoid
|
|
|
|
-- changing this register, hence avoid this check.
|
|
|
|
if not test.exception_table.dot_reg_changed then
|
2024-01-12 10:59:57 -07:00
|
|
|
eq(orig_dotstr, fn.getreg('.'))
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
|
|
|
|
-- Doing something, undoing it, and then redoing it should
|
|
|
|
-- leave us in the same state as just doing it once.
|
|
|
|
-- For :ex actions we want '@:', for normal actions we want '.'
|
|
|
|
|
|
|
|
-- The '.' redo doesn't work for visual put so just exit if
|
|
|
|
-- it was tested.
|
|
|
|
-- We check that visual put was used by checking if the '< and
|
|
|
|
-- '> marks were changed.
|
|
|
|
if not visual_marks_zero() then
|
|
|
|
return
|
|
|
|
end
|
|
|
|
|
|
|
|
if test.exception_table.undo_position then
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', init_cursorpos)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
if was_cli then
|
|
|
|
feed('@:')
|
|
|
|
else
|
|
|
|
feed('.')
|
|
|
|
end
|
|
|
|
|
|
|
|
test.test_assertions(test.exception_table, true)
|
|
|
|
end)
|
|
|
|
end
|
|
|
|
end -- run_test_variations()
|
|
|
|
-- }}}
|
|
|
|
|
2024-01-02 18:09:18 -07:00
|
|
|
local function create_test_defs(
|
|
|
|
test_defs,
|
|
|
|
command_base,
|
|
|
|
command_creator, -- {{{
|
|
|
|
expect_base,
|
|
|
|
expect_creator
|
|
|
|
)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local rettab = {}
|
|
|
|
local exceptions
|
|
|
|
for _, v in pairs(test_defs) do
|
|
|
|
if v[4] then
|
|
|
|
exceptions = v[4]
|
|
|
|
else
|
|
|
|
exceptions = {}
|
|
|
|
end
|
2024-01-02 18:09:18 -07:00
|
|
|
table.insert(rettab, {
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
test_action = command_creator(command_base, v[1]),
|
|
|
|
test_assertions = expect_creator(expect_base, v[2]),
|
|
|
|
description = v[3],
|
|
|
|
exception_table = exceptions,
|
|
|
|
})
|
|
|
|
end
|
|
|
|
return rettab
|
|
|
|
end -- create_test_defs() }}}
|
|
|
|
|
|
|
|
local function find_cursor_position(expect_string) -- {{{
|
2022-03-09 23:34:55 -07:00
|
|
|
-- There must only be one occurrence of the character 'x' in
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
-- expect_string.
|
2022-03-09 23:34:55 -07:00
|
|
|
-- This function removes that occurrence, and returns the position that
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
-- it was in.
|
|
|
|
-- This returns the cursor position that would leave the 'x' in that
|
|
|
|
-- place if we feed 'ix<esc>' and the string existed before it.
|
2024-01-12 10:59:57 -07:00
|
|
|
for linenum, line in pairs(fn.split(expect_string, '\n', 1)) do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local column = line:find('x')
|
|
|
|
if column then
|
2024-01-02 18:09:18 -07:00
|
|
|
return { linenum, column }, expect_string:gsub('x', '')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
end
|
|
|
|
end -- find_cursor_position() }}}
|
|
|
|
|
|
|
|
-- Action function creators {{{
|
|
|
|
local function create_p_action(test_map, substitution)
|
|
|
|
local temp_val = test_map:gsub('p', substitution)
|
|
|
|
return function()
|
|
|
|
feed(temp_val)
|
|
|
|
return false
|
|
|
|
end
|
|
|
|
end
|
|
|
|
|
|
|
|
local function create_put_action(command_base, substitution)
|
|
|
|
local temp_val = command_base:gsub('put', substitution)
|
|
|
|
return function()
|
2017-04-08 14:12:26 -07:00
|
|
|
feed_command(temp_val)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
return true
|
|
|
|
end
|
|
|
|
end
|
|
|
|
-- }}}
|
|
|
|
|
|
|
|
-- Expect function creator {{{
|
|
|
|
local function expect_creator(conversion_function, expect_base, conversion_table)
|
|
|
|
local temp_expect_string = conversion_function(expect_base, conversion_table)
|
|
|
|
local cursor_position, expect_string = find_cursor_position(temp_expect_string)
|
|
|
|
return function(exception_table, after_redo)
|
|
|
|
expect(expect_string)
|
|
|
|
|
2024-01-12 10:59:57 -07:00
|
|
|
-- Have to use getcurpos() instead of api.nvim_win_get_cursor(0) in
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
-- order to account for virtualedit.
|
|
|
|
-- We always want the curswant element in getcurpos(), which is
|
|
|
|
-- sometimes different to the column element in
|
2024-01-12 10:59:57 -07:00
|
|
|
-- api.nvim_win_get_cursor(0).
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
-- NOTE: The ".gp command leaves the cursor after the pasted text
|
|
|
|
-- when running, but does not when the command is redone with the
|
|
|
|
-- '.' command.
|
|
|
|
if not (exception_table.redo_position and after_redo) then
|
2024-01-12 10:59:57 -07:00
|
|
|
local actual_position = fn.getcurpos()
|
2024-01-02 18:09:18 -07:00
|
|
|
eq(cursor_position, { actual_position[2], actual_position[5] })
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
end
|
|
|
|
end -- expect_creator() }}}
|
|
|
|
|
|
|
|
-- Test definitions {{{
|
|
|
|
local function copy_def(def)
|
|
|
|
local rettab = { '', {}, '', nil }
|
|
|
|
rettab[1] = def[1]
|
2024-01-02 18:09:18 -07:00
|
|
|
for k, v in pairs(def[2]) do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
rettab[2][k] = v
|
|
|
|
end
|
|
|
|
rettab[3] = def[3]
|
|
|
|
if def[4] then
|
|
|
|
rettab[4] = {}
|
2024-01-02 18:09:18 -07:00
|
|
|
for k, v in pairs(def[4]) do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
rettab[4][k] = v
|
|
|
|
end
|
|
|
|
end
|
|
|
|
return rettab
|
|
|
|
end
|
|
|
|
|
|
|
|
local normal_command_defs = {
|
|
|
|
{
|
|
|
|
'p',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = false, put_backwards = false, dot_register = false },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'pastes after cursor with p',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'gp',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = true, put_backwards = false, dot_register = false },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'leaves cursor after text with gp',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'".p',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = false, put_backwards = false, dot_register = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'works with the ". register',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'".gp',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = true, put_backwards = false, dot_register = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'gp works with the ". register',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ redo_position = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
},
|
|
|
|
{
|
|
|
|
'P',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = false, put_backwards = true, dot_register = false },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'pastes before cursor with P',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'gP',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = true, put_backwards = true, dot_register = false },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'gP pastes before cursor and leaves cursor after text',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'".P',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = false, put_backwards = true, dot_register = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'P works with ". register',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'".gP',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ cursor_after = true, put_backwards = true, dot_register = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'gP works with ". register',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ redo_position = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
},
|
|
|
|
}
|
|
|
|
|
|
|
|
-- Add a definition applying a count for each definition above.
|
|
|
|
-- Could do this for each transformation (p -> P, p -> gp etc), but I think
|
|
|
|
-- it's neater this way (balance between being explicit and too verbose).
|
2024-01-02 18:09:18 -07:00
|
|
|
for i = 1, #normal_command_defs do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local cur = normal_command_defs[i]
|
|
|
|
|
|
|
|
-- Make modified copy of current definition that includes a count.
|
|
|
|
local newdef = copy_def(cur)
|
|
|
|
newdef[2].count = 2
|
|
|
|
cur[2].count = 1
|
|
|
|
newdef[1] = '2' .. newdef[1]
|
|
|
|
newdef[3] = 'double ' .. newdef[3]
|
|
|
|
|
|
|
|
if cur[2].dot_register then
|
|
|
|
if not cur[4] then
|
|
|
|
newdef[4] = {}
|
|
|
|
end
|
|
|
|
newdef[4].dot_reg_changed = true
|
|
|
|
end
|
|
|
|
|
|
|
|
normal_command_defs[#normal_command_defs + 1] = newdef
|
|
|
|
end
|
|
|
|
|
|
|
|
local ex_command_defs = {
|
|
|
|
{
|
|
|
|
'put',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ put_backwards = false, dot_register = false },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'pastes linewise forwards with :put',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'put!',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ put_backwards = true, dot_register = false },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'pastes linewise backwards with :put!',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'put .',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ put_backwards = false, dot_register = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'pastes linewise with the dot register',
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'put! .',
|
2024-01-02 18:09:18 -07:00
|
|
|
{ put_backwards = true, dot_register = true },
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
'pastes linewise backwards with the dot register',
|
|
|
|
},
|
|
|
|
}
|
|
|
|
|
|
|
|
local function non_dotdefs(def_table)
|
2024-01-02 18:09:18 -07:00
|
|
|
return filter(function(d)
|
|
|
|
return not d[2].dot_register
|
|
|
|
end, def_table)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
|
|
|
|
-- }}}
|
|
|
|
|
|
|
|
-- Conversion functions {{{
|
2024-01-02 18:09:18 -07:00
|
|
|
local function convert_charwise(expect_base, conversion_table, virtualedit_end, visual_put)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
expect_base = dedent(expect_base)
|
|
|
|
-- There is no difference between 'P' and 'p' when VIsual_active
|
|
|
|
if not visual_put then
|
|
|
|
if conversion_table.put_backwards then
|
|
|
|
-- Special case for virtualedit at the end of a line.
|
|
|
|
local replace_string
|
|
|
|
if not virtualedit_end then
|
|
|
|
replace_string = 'test_stringx"%1'
|
|
|
|
else
|
|
|
|
replace_string = 'test_stringx"'
|
|
|
|
end
|
|
|
|
expect_base = expect_base:gsub('(.)test_stringx"', replace_string)
|
|
|
|
end
|
|
|
|
end
|
|
|
|
if conversion_table.count > 1 then
|
|
|
|
local rep_string = 'test_string"'
|
2024-01-02 18:09:18 -07:00
|
|
|
local extra_puts = rep_string:rep(conversion_table.count - 1)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
expect_base = expect_base:gsub('test_stringx"', extra_puts .. 'test_stringx"')
|
|
|
|
end
|
|
|
|
if conversion_table.cursor_after then
|
|
|
|
expect_base = expect_base:gsub('test_stringx"', 'test_string"x')
|
|
|
|
end
|
|
|
|
if conversion_table.dot_register then
|
|
|
|
expect_base = expect_base:gsub('(test_stringx?)"', '%1.')
|
|
|
|
end
|
|
|
|
return expect_base
|
2019-11-25 02:08:02 -07:00
|
|
|
end -- convert_charwise()
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
|
|
|
|
local function make_back(string)
|
|
|
|
local prev_line
|
|
|
|
local rettab = {}
|
|
|
|
local string_found = false
|
2024-01-12 10:59:57 -07:00
|
|
|
for _, line in pairs(fn.split(string, '\n', 1)) do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
if line:find('test_string') then
|
|
|
|
string_found = true
|
|
|
|
table.insert(rettab, line)
|
|
|
|
else
|
|
|
|
if string_found then
|
|
|
|
if prev_line then
|
|
|
|
table.insert(rettab, prev_line)
|
|
|
|
prev_line = nil
|
|
|
|
end
|
|
|
|
table.insert(rettab, line)
|
|
|
|
else
|
|
|
|
table.insert(rettab, prev_line)
|
|
|
|
prev_line = line
|
|
|
|
end
|
|
|
|
end
|
|
|
|
end
|
|
|
|
-- In case there are no lines after the text that was put.
|
|
|
|
if prev_line and string_found then
|
|
|
|
table.insert(rettab, prev_line)
|
|
|
|
end
|
|
|
|
return table.concat(rettab, '\n')
|
|
|
|
end -- make_back()
|
|
|
|
|
|
|
|
local function convert_linewise(expect_base, conversion_table, _, use_a, indent)
|
|
|
|
expect_base = dedent(expect_base)
|
|
|
|
if conversion_table.put_backwards then
|
|
|
|
expect_base = make_back(expect_base)
|
|
|
|
end
|
|
|
|
local p_str = 'test_string"'
|
|
|
|
if use_a then
|
|
|
|
p_str = 'test_stringa'
|
|
|
|
end
|
|
|
|
|
|
|
|
if conversion_table.dot_register then
|
|
|
|
expect_base = expect_base:gsub('x' .. p_str, 'xtest_string.')
|
|
|
|
p_str = 'test_string.'
|
|
|
|
end
|
|
|
|
|
|
|
|
if conversion_table.cursor_after then
|
|
|
|
expect_base = expect_base:gsub('x' .. p_str .. '\n', p_str .. '\nx')
|
|
|
|
end
|
|
|
|
|
|
|
|
-- The 'indent' argument is only used here because a single put with an
|
|
|
|
-- indent doesn't require special handling. It doesn't require special
|
|
|
|
-- handling because the cursor is never put before the indent, hence
|
|
|
|
-- the modification of 'test_stringx"' gives the same overall answer as
|
|
|
|
-- modifying ' test_stringx"'.
|
|
|
|
|
|
|
|
-- Only happens when using normal mode command actions.
|
|
|
|
if conversion_table.count and conversion_table.count > 1 then
|
|
|
|
if not indent then
|
|
|
|
indent = ''
|
|
|
|
end
|
|
|
|
local rep_string = indent .. p_str .. '\n'
|
2024-01-02 18:09:18 -07:00
|
|
|
local extra_puts = rep_string:rep(conversion_table.count - 1)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local orig_string, new_string
|
|
|
|
if conversion_table.cursor_after then
|
|
|
|
orig_string = indent .. p_str .. '\nx'
|
|
|
|
new_string = extra_puts .. orig_string
|
|
|
|
else
|
|
|
|
orig_string = indent .. 'x' .. p_str .. '\n'
|
|
|
|
new_string = orig_string .. extra_puts
|
|
|
|
end
|
|
|
|
expect_base = expect_base:gsub(orig_string, new_string)
|
|
|
|
end
|
|
|
|
return expect_base
|
|
|
|
end
|
|
|
|
|
|
|
|
local function put_x_last(orig_line, p_str)
|
|
|
|
local prev_end, cur_end, cur_start = 0, 0, 0
|
|
|
|
while cur_start do
|
|
|
|
prev_end = cur_end
|
|
|
|
cur_start, cur_end = orig_line:find(p_str, prev_end)
|
|
|
|
end
|
|
|
|
-- Assume (because that is the only way I call it) that p_str matches
|
|
|
|
-- the pattern 'test_string.'
|
|
|
|
return orig_line:sub(1, prev_end - 1) .. 'x' .. orig_line:sub(prev_end)
|
|
|
|
end
|
|
|
|
|
2024-01-02 18:09:18 -07:00
|
|
|
local function convert_blockwise(
|
|
|
|
expect_base,
|
|
|
|
conversion_table,
|
|
|
|
visual,
|
|
|
|
use_b,
|
|
|
|
trailing_whitespace
|
|
|
|
)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
expect_base = dedent(expect_base)
|
|
|
|
local p_str = 'test_string"'
|
|
|
|
if use_b then
|
|
|
|
p_str = 'test_stringb'
|
|
|
|
end
|
|
|
|
|
|
|
|
if conversion_table.dot_register then
|
|
|
|
expect_base = expect_base:gsub('(x?)' .. p_str, '%1test_string.')
|
|
|
|
-- Looks strange, but the dot is a special character in the pattern
|
|
|
|
-- and a literal character in the replacement.
|
|
|
|
expect_base = expect_base:gsub('test_stringx.', 'test_stringx.')
|
|
|
|
p_str = 'test_string.'
|
|
|
|
end
|
|
|
|
|
|
|
|
-- No difference between 'p' and 'P' in visual mode.
|
|
|
|
if not visual then
|
|
|
|
if conversion_table.put_backwards then
|
|
|
|
-- One for the line where the cursor is left, one for all other
|
|
|
|
-- lines.
|
|
|
|
expect_base = expect_base:gsub('([^x])' .. p_str, p_str .. '%1')
|
|
|
|
expect_base = expect_base:gsub('([^x])x' .. p_str, 'x' .. p_str .. '%1')
|
|
|
|
if not trailing_whitespace then
|
|
|
|
expect_base = expect_base:gsub(' \n', '\n')
|
|
|
|
expect_base = expect_base:gsub(' $', '')
|
|
|
|
end
|
|
|
|
end
|
|
|
|
end
|
|
|
|
|
|
|
|
if conversion_table.count and conversion_table.count > 1 then
|
|
|
|
local p_pattern = p_str:gsub('%.', '%%.')
|
2024-01-02 18:09:18 -07:00
|
|
|
expect_base = expect_base:gsub(p_pattern, p_str:rep(conversion_table.count))
|
|
|
|
expect_base =
|
|
|
|
expect_base:gsub('test_stringx([b".])', p_str:rep(conversion_table.count - 1) .. '%0')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
|
|
|
|
if conversion_table.cursor_after then
|
|
|
|
if not visual then
|
|
|
|
local prev_line
|
|
|
|
local rettab = {}
|
|
|
|
local prev_in_block = false
|
2024-01-12 10:59:57 -07:00
|
|
|
for _, line in pairs(fn.split(expect_base, '\n', 1)) do
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
if line:find('test_string') then
|
|
|
|
if prev_line then
|
|
|
|
prev_line = prev_line:gsub('x', '')
|
|
|
|
table.insert(rettab, prev_line)
|
|
|
|
end
|
|
|
|
prev_line = line
|
|
|
|
prev_in_block = true
|
|
|
|
else
|
|
|
|
if prev_in_block then
|
|
|
|
prev_line = put_x_last(prev_line, p_str)
|
|
|
|
table.insert(rettab, prev_line)
|
|
|
|
prev_in_block = false
|
|
|
|
end
|
|
|
|
table.insert(rettab, line)
|
|
|
|
end
|
|
|
|
end
|
|
|
|
if prev_line and prev_in_block then
|
|
|
|
table.insert(rettab, put_x_last(prev_line, p_str))
|
|
|
|
end
|
|
|
|
|
|
|
|
expect_base = table.concat(rettab, '\n')
|
|
|
|
else
|
|
|
|
expect_base = expect_base:gsub('x(.)', '%1x')
|
|
|
|
end
|
|
|
|
end
|
|
|
|
|
|
|
|
return expect_base
|
|
|
|
end
|
|
|
|
-- }}}
|
|
|
|
|
|
|
|
-- Convenience functions {{{
|
2024-01-02 18:09:18 -07:00
|
|
|
local function run_normal_mode_tests(
|
|
|
|
test_string,
|
|
|
|
base_map,
|
|
|
|
extra_setup,
|
|
|
|
virtualedit_end,
|
|
|
|
selection_string
|
|
|
|
)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local function convert_closure(e, c)
|
2019-11-25 02:08:02 -07:00
|
|
|
return convert_charwise(e, c, virtualedit_end, selection_string)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
local function expect_normal_creator(expect_base, conversion_table)
|
|
|
|
local test_expect = expect_creator(convert_closure, expect_base, conversion_table)
|
|
|
|
return function(exception_table, after_redo)
|
|
|
|
test_expect(exception_table, after_redo)
|
|
|
|
if selection_string then
|
2022-02-08 23:21:04 -07:00
|
|
|
if not conversion_table.put_backwards then
|
2024-01-12 10:59:57 -07:00
|
|
|
eq(selection_string, fn.getreg('"'))
|
2022-02-08 23:21:04 -07:00
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
else
|
2024-01-12 10:59:57 -07:00
|
|
|
eq('test_string"', fn.getreg('"'))
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
end
|
|
|
|
end
|
|
|
|
run_test_variations(
|
|
|
|
create_test_defs(
|
|
|
|
normal_command_defs,
|
|
|
|
base_map,
|
|
|
|
create_p_action,
|
|
|
|
test_string,
|
|
|
|
expect_normal_creator
|
|
|
|
),
|
|
|
|
extra_setup
|
|
|
|
)
|
|
|
|
end -- run_normal_mode_tests()
|
|
|
|
|
|
|
|
local function convert_linewiseer(expect_base, conversion_table)
|
|
|
|
return expect_creator(convert_linewise, expect_base, conversion_table)
|
|
|
|
end
|
|
|
|
|
|
|
|
local function run_linewise_tests(expect_base, base_command, extra_setup)
|
|
|
|
local linewise_test_defs = create_test_defs(
|
2024-01-02 18:09:18 -07:00
|
|
|
ex_command_defs,
|
|
|
|
base_command,
|
|
|
|
create_put_action,
|
|
|
|
expect_base,
|
|
|
|
convert_linewiseer
|
|
|
|
)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
run_test_variations(linewise_test_defs, extra_setup)
|
|
|
|
end -- run_linewise_tests()
|
|
|
|
-- }}}
|
|
|
|
|
|
|
|
-- Actual tests
|
|
|
|
describe('default pasting', function()
|
|
|
|
local expect_string = [[
|
|
|
|
Ltest_stringx"ine of words 1
|
|
|
|
Line of words 2]]
|
|
|
|
run_normal_mode_tests(expect_string, 'p')
|
|
|
|
|
2024-01-02 18:09:18 -07:00
|
|
|
run_linewise_tests(
|
|
|
|
[[
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
Line of words 1
|
|
|
|
xtest_string"
|
|
|
|
Line of words 2]],
|
|
|
|
'put'
|
|
|
|
)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('linewise register', function()
|
|
|
|
-- put with 'p'
|
|
|
|
local local_ex_command_defs = non_dotdefs(normal_command_defs)
|
|
|
|
local base_expect_string = [[
|
|
|
|
Line of words 1
|
|
|
|
xtest_stringa
|
|
|
|
Line of words 2]]
|
|
|
|
local function local_convert_linewise(expect_base, conversion_table)
|
|
|
|
return convert_linewise(expect_base, conversion_table, nil, true)
|
|
|
|
end
|
|
|
|
local function expect_lineput(expect_base, conversion_table)
|
|
|
|
return expect_creator(local_convert_linewise, expect_base, conversion_table)
|
|
|
|
end
|
|
|
|
run_test_variations(
|
|
|
|
create_test_defs(
|
|
|
|
local_ex_command_defs,
|
|
|
|
'"ap',
|
|
|
|
create_p_action,
|
|
|
|
base_expect_string,
|
|
|
|
expect_lineput
|
|
|
|
)
|
|
|
|
)
|
|
|
|
|
|
|
|
-- put with :put
|
|
|
|
local linewise_put_defs = non_dotdefs(ex_command_defs)
|
|
|
|
base_expect_string = [[
|
|
|
|
Line of words 1
|
|
|
|
xtest_stringa
|
|
|
|
Line of words 2]]
|
|
|
|
run_test_variations(
|
|
|
|
create_test_defs(
|
|
|
|
linewise_put_defs,
|
2024-01-02 18:09:18 -07:00
|
|
|
'put a',
|
|
|
|
create_put_action,
|
|
|
|
base_expect_string,
|
|
|
|
convert_linewiseer
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
)
|
|
|
|
)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('blockwise register', function()
|
|
|
|
local blockwise_put_defs = non_dotdefs(normal_command_defs)
|
|
|
|
local test_base = [[
|
|
|
|
Lxtest_stringbine of words 1
|
|
|
|
Ltest_stringbine of words 2
|
|
|
|
test_stringb]]
|
|
|
|
|
|
|
|
local function expect_block_creator(expect_base, conversion_table)
|
2024-01-02 18:09:18 -07:00
|
|
|
return expect_creator(function(e, c)
|
|
|
|
return convert_blockwise(e, c, nil, true)
|
|
|
|
end, expect_base, conversion_table)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
|
|
|
|
run_test_variations(
|
2024-01-02 18:09:18 -07:00
|
|
|
create_test_defs(blockwise_put_defs, '"bp', create_p_action, test_base, expect_block_creator)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
)
|
|
|
|
end)
|
|
|
|
|
|
|
|
it('adds correct indentation when put with [p and ]p', function()
|
|
|
|
feed('G>>"a]pix<esc>')
|
|
|
|
-- luacheck: ignore
|
|
|
|
expect([[
|
|
|
|
Line of words 1
|
|
|
|
Line of words 2
|
|
|
|
xtest_stringa]])
|
|
|
|
feed('uu"a[pix<esc>')
|
|
|
|
-- luacheck: ignore
|
|
|
|
expect([[
|
|
|
|
Line of words 1
|
|
|
|
xtest_stringa
|
|
|
|
Line of words 2]])
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('linewise paste with autoindent', function()
|
|
|
|
-- luacheck: ignore
|
2024-01-02 18:09:18 -07:00
|
|
|
run_linewise_tests(
|
|
|
|
[[
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
Line of words 1
|
|
|
|
Line of words 2
|
|
|
|
xtest_string"]],
|
2024-01-02 18:09:18 -07:00
|
|
|
'put',
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setline('$', ' Line of words 2')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
-- Set curswant to '8' to be at the end of the tab character
|
|
|
|
-- This is where the cursor is put back after the 'u' command.
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 2, 1, 0, 8 })
|
2023-04-06 18:29:12 -07:00
|
|
|
command('set autoindent')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('put inside tabs with virtualedit', function()
|
|
|
|
local test_string = [[
|
|
|
|
Line of words 1
|
|
|
|
test_stringx" Line of words 2]]
|
|
|
|
run_normal_mode_tests(test_string, 'p', function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setline('$', ' Line of words 2')
|
2023-04-06 18:29:12 -07:00
|
|
|
command('setlocal virtualedit=all')
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 2, 1, 2, 3 })
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('put after the line with virtualedit', function()
|
2019-06-29 13:25:00 -07:00
|
|
|
-- luacheck: ignore 621
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
local test_string = [[
|
|
|
|
Line of words 1 test_stringx"
|
|
|
|
Line of words 2]]
|
|
|
|
run_normal_mode_tests(test_string, 'p', function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setline('$', ' Line of words 2')
|
2023-04-06 18:29:12 -07:00
|
|
|
command('setlocal virtualedit=all')
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 1, 16, 1, 17 })
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end, true)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('Visual put', function()
|
|
|
|
describe('basic put', function()
|
|
|
|
local test_string = [[
|
|
|
|
test_stringx" words 1
|
|
|
|
Line of words 2]]
|
|
|
|
run_normal_mode_tests(test_string, 'v2ep', nil, nil, 'Line of')
|
|
|
|
end)
|
|
|
|
describe('over trailing newline', function()
|
2024-01-02 18:09:18 -07:00
|
|
|
local test_string = 'Line of test_stringx"Line of words 2'
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
run_normal_mode_tests(test_string, 'v$p', function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 1, 9, 0, 9 })
|
2024-01-02 18:09:18 -07:00
|
|
|
end, nil, 'words 1\n')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
describe('linewise mode', function()
|
|
|
|
local test_string = [[
|
|
|
|
xtest_string"
|
|
|
|
Line of words 2]]
|
|
|
|
local function expect_vis_linewise(expect_base, conversion_table)
|
|
|
|
return expect_creator(function(e, c)
|
|
|
|
return convert_linewise(e, c, nil, nil)
|
2024-01-02 18:09:18 -07:00
|
|
|
end, expect_base, conversion_table)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
run_test_variations(
|
|
|
|
create_test_defs(
|
|
|
|
normal_command_defs,
|
|
|
|
'Vp',
|
|
|
|
create_p_action,
|
|
|
|
test_string,
|
|
|
|
expect_vis_linewise
|
|
|
|
),
|
2024-01-02 18:09:18 -07:00
|
|
|
function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 1, 1, 0, 1 })
|
2024-01-02 18:09:18 -07:00
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
)
|
|
|
|
|
|
|
|
describe('with whitespace at bol', function()
|
|
|
|
local function expect_vis_lineindented(expect_base, conversion_table)
|
|
|
|
local test_expect = expect_creator(function(e, c)
|
2024-01-02 18:09:18 -07:00
|
|
|
return convert_linewise(e, c, nil, nil, ' ')
|
|
|
|
end, expect_base, conversion_table)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
return function(exception_table, after_redo)
|
|
|
|
test_expect(exception_table, after_redo)
|
2022-02-08 23:21:04 -07:00
|
|
|
if not conversion_table.put_backwards then
|
2024-01-12 10:59:57 -07:00
|
|
|
eq('Line of words 1\n', fn.getreg('"'))
|
2022-02-08 23:21:04 -07:00
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
end
|
|
|
|
local base_expect_string = [[
|
|
|
|
xtest_string"
|
|
|
|
Line of words 2]]
|
|
|
|
run_test_variations(
|
|
|
|
create_test_defs(
|
|
|
|
normal_command_defs,
|
|
|
|
'Vp',
|
|
|
|
create_p_action,
|
|
|
|
base_expect_string,
|
|
|
|
expect_vis_lineindented
|
|
|
|
),
|
|
|
|
function()
|
|
|
|
feed('i test_string.<esc>u')
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setreg('"', ' test_string"', 'v')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
)
|
|
|
|
end)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('blockwise visual mode', function()
|
|
|
|
local test_base = [[
|
|
|
|
test_stringx"e of words 1
|
|
|
|
test_string"e of words 2]]
|
|
|
|
|
|
|
|
local function expect_block_creator(expect_base, conversion_table)
|
|
|
|
local test_expect = expect_creator(function(e, c)
|
2024-01-02 18:09:18 -07:00
|
|
|
return convert_blockwise(e, c, true)
|
|
|
|
end, expect_base, conversion_table)
|
|
|
|
return function(e, c)
|
|
|
|
test_expect(e, c)
|
2022-02-08 23:21:04 -07:00
|
|
|
if not conversion_table.put_backwards then
|
2024-01-12 10:59:57 -07:00
|
|
|
eq('Lin\nLin', fn.getreg('"'))
|
2022-02-08 23:21:04 -07:00
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
end
|
|
|
|
|
|
|
|
local select_down_test_defs = create_test_defs(
|
2024-01-02 18:09:18 -07:00
|
|
|
normal_command_defs,
|
|
|
|
'<C-v>jllp',
|
|
|
|
create_p_action,
|
|
|
|
test_base,
|
|
|
|
expect_block_creator
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
)
|
|
|
|
run_test_variations(select_down_test_defs)
|
|
|
|
|
|
|
|
-- Undo and redo of a visual block put leave the cursor in the top
|
|
|
|
-- left of the visual block area no matter where the cursor was
|
|
|
|
-- when it started.
|
|
|
|
local undo_redo_no = map(function(table)
|
2024-01-02 18:09:18 -07:00
|
|
|
local rettab = copy_def(table)
|
|
|
|
if not rettab[4] then
|
|
|
|
rettab[4] = {}
|
|
|
|
end
|
|
|
|
rettab[4].undo_position = true
|
|
|
|
rettab[4].redo_position = true
|
|
|
|
return rettab
|
|
|
|
end, normal_command_defs)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
|
|
|
|
-- Selection direction doesn't matter
|
|
|
|
run_test_variations(
|
|
|
|
create_test_defs(
|
|
|
|
undo_redo_no,
|
|
|
|
'<C-v>kllp',
|
|
|
|
create_p_action,
|
|
|
|
test_base,
|
|
|
|
expect_block_creator
|
|
|
|
),
|
2024-01-02 18:09:18 -07:00
|
|
|
function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 2, 1, 0, 1 })
|
2024-01-02 18:09:18 -07:00
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
)
|
|
|
|
|
|
|
|
describe('blockwise cursor after undo', function()
|
|
|
|
-- A bit of a hack of the reset above.
|
|
|
|
-- In the tests that selection direction doesn't matter, we
|
|
|
|
-- don't check the undo/redo position because it doesn't fit
|
|
|
|
-- the same pattern as everything else.
|
|
|
|
-- Here we fix this by directly checking the undo/redo position
|
|
|
|
-- in the test_assertions of our test definitions.
|
2024-01-02 18:09:18 -07:00
|
|
|
local function assertion_creator(_, _)
|
|
|
|
return function(_, _)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
feed('u')
|
|
|
|
-- Have to use feed('u') here to set curswant, because
|
|
|
|
-- ex_undo() doesn't do that.
|
2024-01-12 10:59:57 -07:00
|
|
|
eq({ 0, 1, 1, 0, 1 }, fn.getcurpos())
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
feed('<C-r>')
|
2024-01-12 10:59:57 -07:00
|
|
|
eq({ 0, 1, 1, 0, 1 }, fn.getcurpos())
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
end
|
|
|
|
|
|
|
|
run_test_variations(
|
2024-01-02 18:09:18 -07:00
|
|
|
create_test_defs(undo_redo_no, '<C-v>kllp', create_p_action, test_base, assertion_creator),
|
|
|
|
function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 2, 1, 0, 1 })
|
2024-01-02 18:09:18 -07:00
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
)
|
|
|
|
end)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe("with 'virtualedit'", function()
|
|
|
|
describe('splitting a tab character', function()
|
|
|
|
local base_expect_string = [[
|
|
|
|
Line of words 1
|
|
|
|
test_stringx" Line of words 2]]
|
2024-01-02 18:09:18 -07:00
|
|
|
run_normal_mode_tests(base_expect_string, 'vp', function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setline('$', ' Line of words 2')
|
2024-01-02 18:09:18 -07:00
|
|
|
command('setlocal virtualedit=all')
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 2, 1, 2, 3 })
|
2024-01-02 18:09:18 -07:00
|
|
|
end, nil, ' ')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
describe('after end of line', function()
|
|
|
|
local base_expect_string = [[
|
|
|
|
Line of words 1 test_stringx"
|
|
|
|
Line of words 2]]
|
2024-01-02 18:09:18 -07:00
|
|
|
run_normal_mode_tests(base_expect_string, 'vp', function()
|
|
|
|
command('setlocal virtualedit=all')
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 1, 16, 2, 18 })
|
2024-01-02 18:09:18 -07:00
|
|
|
end, true, ' ')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
end)
|
|
|
|
end)
|
|
|
|
|
|
|
|
describe('. register special tests', function()
|
2019-06-29 13:25:00 -07:00
|
|
|
-- luacheck: ignore 621
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
before_each(reset)
|
|
|
|
it('applies control character actions', function()
|
|
|
|
feed('i<C-t><esc>u')
|
|
|
|
expect([[
|
|
|
|
Line of words 1
|
|
|
|
Line of words 2]])
|
|
|
|
feed('".p')
|
|
|
|
expect([[
|
|
|
|
Line of words 1
|
|
|
|
Line of words 2]])
|
|
|
|
feed('u1go<C-v>j".p')
|
2024-01-02 18:09:18 -07:00
|
|
|
eq(
|
|
|
|
[[
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
ine of words 1
|
2024-01-02 18:09:18 -07:00
|
|
|
ine of words 2]],
|
|
|
|
curbuf_contents()
|
|
|
|
)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
|
2022-06-25 09:51:55 -07:00
|
|
|
local screen
|
|
|
|
setup(function()
|
|
|
|
screen = Screen.new()
|
|
|
|
end)
|
|
|
|
|
|
|
|
local function bell_test(actions, should_ring)
|
2017-06-26 05:49:15 -07:00
|
|
|
if should_ring then
|
|
|
|
-- check bell is not set by nvim before the action
|
|
|
|
screen:sleep(50)
|
|
|
|
end
|
2024-04-08 02:03:20 -07:00
|
|
|
t.ok(not screen.bell and not screen.visualbell)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
actions()
|
2024-01-02 18:09:18 -07:00
|
|
|
screen:expect {
|
|
|
|
condition = function()
|
|
|
|
if should_ring then
|
|
|
|
if not screen.bell and not screen.visualbell then
|
|
|
|
error('Bell was not rung after action')
|
|
|
|
end
|
|
|
|
else
|
|
|
|
if screen.bell or screen.visualbell then
|
|
|
|
error('Bell was rung after action')
|
|
|
|
end
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
2024-01-02 18:09:18 -07:00
|
|
|
end,
|
|
|
|
unchanged = not should_ring,
|
|
|
|
}
|
2023-04-27 00:51:44 -07:00
|
|
|
screen.bell = false
|
|
|
|
screen.visualbell = false
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end
|
|
|
|
|
|
|
|
it('should not ring the bell with gp at end of line', function()
|
2024-01-02 18:09:18 -07:00
|
|
|
bell_test(function()
|
|
|
|
feed('$".gp')
|
|
|
|
end)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
|
|
|
|
-- Even if the last character is a multibyte character.
|
|
|
|
reset()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setline(1, 'helloม')
|
2024-01-02 18:09:18 -07:00
|
|
|
bell_test(function()
|
|
|
|
feed('$".gp')
|
|
|
|
end)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
|
|
|
|
it('should not ring the bell with gp and end of file', function()
|
2024-01-12 10:59:57 -07:00
|
|
|
fn.setpos('.', { 0, 2, 1, 0 })
|
2024-01-02 18:09:18 -07:00
|
|
|
bell_test(function()
|
|
|
|
feed('$vl".gp')
|
|
|
|
end)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
|
|
|
|
it('should ring the bell when deleting if not appropriate', function()
|
2023-04-06 18:29:12 -07:00
|
|
|
command('goto 2')
|
|
|
|
feed('i<bs><esc>')
|
|
|
|
expect([[
|
|
|
|
ine of words 1
|
|
|
|
Line of words 2]])
|
2024-01-02 18:09:18 -07:00
|
|
|
bell_test(function()
|
|
|
|
feed('".P')
|
|
|
|
end, true)
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
|
|
|
|
it('should restore cursor position after undo of ".p', function()
|
2024-01-12 10:59:57 -07:00
|
|
|
local origpos = fn.getcurpos()
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
feed('".pu')
|
2024-01-12 10:59:57 -07:00
|
|
|
eq(origpos, fn.getcurpos())
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
end)
|
|
|
|
|
|
|
|
it("should be unaffected by 'autoindent' with V\".2p", function()
|
2023-04-06 18:29:12 -07:00
|
|
|
command('set autoindent')
|
put fixup, esp. ". register close #5709 #5781
Note some bugs were judged to have too ugly a fix to solve, tests to
demonstrate these problems, and the explanation behind not fixing them
are below.
describe('register . problems', function()
before_each(reset)
-- The difficulty here is: The basic requirement is that the text
-- inserted is treated as if it were typed in insert mode. This is why
-- the paste method is to enter insert mode and enter the ". register
-- into readbuf1.
-- We can't add a count into the readbuf here because the insert mode
-- count is implemented with readbuf2 which is checked for characters
-- after readbuf1.
-- Hence, the ".gp command (which adds extra characters into readbuf1
-- to emulate leaving the cursor after the text by moving the cursor
-- after inserting the text) would insert the motion characters into
-- the buffer instead of using them to move after the insert has been
-- done.
-- I could probably get this working properly with a special flag put
-- into start_redo_ins() and set in do_put(), but I think this adds
-- much more complexity than fixing this bug justifies.
pending('should not change the ". register with ".2p', function()
local orig_register = funcs.getreg('.')
feed('2".p')
eq(orig_register, funcs.getreg('.'))
end)
describe("cursor positioning after undo and redo with '.'", function()
before_each(reset)
local function make_cursor_test(macro_string)
return function()
feed(macro_string)
local afterpos = funcs.getcurpos()
local orig_string = curbuf_contents()
feed('u.')
eq(afterpos, funcs.getcurpos())
expect(orig_string)
end
end
-- The difficulty here is: setting the cursor after the end of the
-- pasted text is done by adding a motion command to the
-- stuffbuffer after the insert.
-- Modifying 'redobuff' is done in the code that handles inserting
-- text and moving around.
-- I could add a special case in ins_esc() that checks for a flag
-- set in do_put() to add the motion character to the redo buffer,
-- but I think that is starting to get way too convoluted for the
-- benefit.
pending('should be the same after ".gp and ".gpu.',
make_cursor_test('".gp'))
-- The difficulty here is: putting forwards is implemented by using
-- 'a' instead of 'i' to start insert.
-- Undoing with 'u' an insert that began with 'a' leaves the cursor
-- where the first character was inserted, not where the cursor was
-- when the 'a' was pressed.
-- We account for this the first time by saving the cursor position
-- in do_put(), but this isn't stored in redobuff for a second time
-- around.
-- We can't change how such a fundamental action as undo after
-- inserting with 'a' behaves, we could add in a special case
-- whereby we set a flag in do_put() and read it when entering
-- insert mode but this seems like way too much to fix such a minor
-- bug.
pending('should be the same after ".pu. and ".pu.u.',
make_cursor_test('".pu.'))
end)
end)
2016-12-12 07:04:44 -07:00
|
|
|
feed('i test_string.<esc>u')
|
|
|
|
feed('V".2p')
|
|
|
|
expect([[
|
|
|
|
test_string.
|
|
|
|
test_string.
|
|
|
|
Line of words 2]])
|
|
|
|
end)
|
|
|
|
end)
|
|
|
|
end)
|