1
linux/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c
Mauro Carvalho Chehab 6686fa6917 V4L/DVB: Break Remote Controller keymaps into modules
The original Remote Controller approach were very messy: a big file,
that were part of ir-common kernel module, containing 64 different
RC keymap tables, used by the V4L/DVB drivers.

Better to break each RC keymap table into a separate module,
registering them into rc core on a process similar to the fs/nls tables.

As an userspace program is now in charge of loading those tables,
adds an option to allow the complete removal of those tables from
kernelspace.

Yet, on embedded devices like Set Top Boxes and TV sets, maybe the
only available input device is the IR. So, we should keep allowing
the usage of in-kernel tables, but a latter patch should change
the default to 'n', after giving some time for distros to add
the v4l-utils with the ir-keytable program, to allow the table
load via userspace.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:49 -03:00

124 lines
3.5 KiB
C

/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller
*
* keymap imported from ir-keymaps.c
*
* Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <media/rc-map.h>
/*
Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
is marked "KS003". The controller is I2C at address 0x30, but does not seem
to respond to probes until a read is performed from a valid device.
I don't know why...
Note: This remote may be of similar or identical design to the
Pixelview remote (?). The raw codes and duplicate button codes
appear to be the same.
Henry Wong <henry@stuffedcow.net>
Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
*/
static struct ir_scancode msi_tvanywhere_plus[] = {
/* ---- Remote Button Layout ----
POWER SOURCE SCAN MUTE
TV/FM 1 2 3
|> 4 5 6
<| 7 8 9
^^UP 0 + RECALL
vvDN RECORD STOP PLAY
MINIMIZE ZOOM
CH+
VOL- VOL+
CH-
SNAPSHOT MTS
<< FUNC >> RESET
*/
{ 0x01, KEY_1 }, /* 1 */
{ 0x0b, KEY_2 }, /* 2 */
{ 0x1b, KEY_3 }, /* 3 */
{ 0x05, KEY_4 }, /* 4 */
{ 0x09, KEY_5 }, /* 5 */
{ 0x15, KEY_6 }, /* 6 */
{ 0x06, KEY_7 }, /* 7 */
{ 0x0a, KEY_8 }, /* 8 */
{ 0x12, KEY_9 }, /* 9 */
{ 0x02, KEY_0 }, /* 0 */
{ 0x10, KEY_KPPLUS }, /* + */
{ 0x13, KEY_AGAIN }, /* Recall */
{ 0x1e, KEY_POWER }, /* Power */
{ 0x07, KEY_TUNER }, /* Source */
{ 0x1c, KEY_SEARCH }, /* Scan */
{ 0x18, KEY_MUTE }, /* Mute */
{ 0x03, KEY_RADIO }, /* TV/FM */
/* The next four keys are duplicates that appear to send the
same IR code as Ch+, Ch-, >>, and << . The raw code assigned
to them is the actual code + 0x20 - they will never be
detected as such unless some way is discovered to distinguish
these buttons from those that have the same code. */
{ 0x3f, KEY_RIGHT }, /* |> and Ch+ */
{ 0x37, KEY_LEFT }, /* <| and Ch- */
{ 0x2c, KEY_UP }, /* ^^Up and >> */
{ 0x24, KEY_DOWN }, /* vvDn and << */
{ 0x00, KEY_RECORD }, /* Record */
{ 0x08, KEY_STOP }, /* Stop */
{ 0x11, KEY_PLAY }, /* Play */
{ 0x0f, KEY_CLOSE }, /* Minimize */
{ 0x19, KEY_ZOOM }, /* Zoom */
{ 0x1a, KEY_CAMERA }, /* Snapshot */
{ 0x0d, KEY_LANGUAGE }, /* MTS */
{ 0x14, KEY_VOLUMEDOWN }, /* Vol- */
{ 0x16, KEY_VOLUMEUP }, /* Vol+ */
{ 0x17, KEY_CHANNELDOWN }, /* Ch- */
{ 0x1f, KEY_CHANNELUP }, /* Ch+ */
{ 0x04, KEY_REWIND }, /* << */
{ 0x0e, KEY_MENU }, /* Function */
{ 0x0c, KEY_FASTFORWARD }, /* >> */
{ 0x1d, KEY_RESTART }, /* Reset */
};
static struct rc_keymap msi_tvanywhere_plus_map = {
.map = {
.scan = msi_tvanywhere_plus,
.size = ARRAY_SIZE(msi_tvanywhere_plus),
.ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
.name = RC_MAP_MSI_TVANYWHERE_PLUS,
}
};
static int __init init_rc_map_msi_tvanywhere_plus(void)
{
return ir_register_map(&msi_tvanywhere_plus_map);
}
static void __exit exit_rc_map_msi_tvanywhere_plus(void)
{
ir_unregister_map(&msi_tvanywhere_plus_map);
}
module_init(init_rc_map_msi_tvanywhere_plus)
module_exit(exit_rc_map_msi_tvanywhere_plus)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");