1
linux/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c

124 lines
3.5 KiB
C
Raw Normal View History

/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller
*
* keymap imported from ir-keymaps.c
*
* Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <media/rc-map.h>
/*
Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
is marked "KS003". The controller is I2C at address 0x30, but does not seem
to respond to probes until a read is performed from a valid device.
I don't know why...
Note: This remote may be of similar or identical design to the
Pixelview remote (?). The raw codes and duplicate button codes
appear to be the same.
Henry Wong <henry@stuffedcow.net>
Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
*/
static struct ir_scancode msi_tvanywhere_plus[] = {
/* ---- Remote Button Layout ----
POWER SOURCE SCAN MUTE
TV/FM 1 2 3
|> 4 5 6
<| 7 8 9
^^UP 0 + RECALL
vvDN RECORD STOP PLAY
MINIMIZE ZOOM
CH+
VOL- VOL+
CH-
SNAPSHOT MTS
<< FUNC >> RESET
*/
{ 0x01, KEY_1 }, /* 1 */
{ 0x0b, KEY_2 }, /* 2 */
{ 0x1b, KEY_3 }, /* 3 */
{ 0x05, KEY_4 }, /* 4 */
{ 0x09, KEY_5 }, /* 5 */
{ 0x15, KEY_6 }, /* 6 */
{ 0x06, KEY_7 }, /* 7 */
{ 0x0a, KEY_8 }, /* 8 */
{ 0x12, KEY_9 }, /* 9 */
{ 0x02, KEY_0 }, /* 0 */
{ 0x10, KEY_KPPLUS }, /* + */
{ 0x13, KEY_AGAIN }, /* Recall */
{ 0x1e, KEY_POWER }, /* Power */
{ 0x07, KEY_TUNER }, /* Source */
{ 0x1c, KEY_SEARCH }, /* Scan */
{ 0x18, KEY_MUTE }, /* Mute */
{ 0x03, KEY_RADIO }, /* TV/FM */
/* The next four keys are duplicates that appear to send the
same IR code as Ch+, Ch-, >>, and << . The raw code assigned
to them is the actual code + 0x20 - they will never be
detected as such unless some way is discovered to distinguish
these buttons from those that have the same code. */
{ 0x3f, KEY_RIGHT }, /* |> and Ch+ */
{ 0x37, KEY_LEFT }, /* <| and Ch- */
{ 0x2c, KEY_UP }, /* ^^Up and >> */
{ 0x24, KEY_DOWN }, /* vvDn and << */
{ 0x00, KEY_RECORD }, /* Record */
{ 0x08, KEY_STOP }, /* Stop */
{ 0x11, KEY_PLAY }, /* Play */
{ 0x0f, KEY_CLOSE }, /* Minimize */
{ 0x19, KEY_ZOOM }, /* Zoom */
{ 0x1a, KEY_CAMERA }, /* Snapshot */
{ 0x0d, KEY_LANGUAGE }, /* MTS */
{ 0x14, KEY_VOLUMEDOWN }, /* Vol- */
{ 0x16, KEY_VOLUMEUP }, /* Vol+ */
{ 0x17, KEY_CHANNELDOWN }, /* Ch- */
{ 0x1f, KEY_CHANNELUP }, /* Ch+ */
{ 0x04, KEY_REWIND }, /* << */
{ 0x0e, KEY_MENU }, /* Function */
{ 0x0c, KEY_FASTFORWARD }, /* >> */
{ 0x1d, KEY_RESTART }, /* Reset */
};
static struct rc_keymap msi_tvanywhere_plus_map = {
.map = {
.scan = msi_tvanywhere_plus,
.size = ARRAY_SIZE(msi_tvanywhere_plus),
.ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
.name = RC_MAP_MSI_TVANYWHERE_PLUS,
}
};
static int __init init_rc_map_msi_tvanywhere_plus(void)
{
return ir_register_map(&msi_tvanywhere_plus_map);
}
static void __exit exit_rc_map_msi_tvanywhere_plus(void)
{
ir_unregister_map(&msi_tvanywhere_plus_map);
}
module_init(init_rc_map_msi_tvanywhere_plus)
module_exit(exit_rc_map_msi_tvanywhere_plus)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");