1
Commit Graph

10174 Commits

Author SHA1 Message Date
Stephen Rothwell
ecc81e0f71 ppc64: use lockc.c from powerpc/lib
since it is effectively the same as locks.c from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:48 +10:00
Stephen Rothwell
43f35ec35c ppc64: use copyuser_64.S from powerpc/lib
since it is identical to copyuser.S from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:37 +10:00
Stephen Rothwell
34faa82841 ppc64: use copypage_64.S from powerpc/lib
since it is identical to copypage.S from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:27 +10:00
Stephen Rothwell
454fb016b3 ppc64: use e2a.c from powerpc/lib
since it is identical to e2a.c from ppc64/lib

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:13 +10:00
Stephen Rothwell
1a3c061efd ppc64: use checksum_64.S from powerpc
as it is identical to checksum.S from ppc64.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:52:58 +10:00
Stephen Rothwell
640768eef2 ppc64: use the merged syscall table
This allows us to also use entry_64.S from the merged tree and reverts
the setup_64.c part of fda262b897.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:51:45 +10:00
Paul Mackerras
9675c7ebcf ppc64: Include arch/powerpc/kernel/setup-common.o
... which is needed now that ARCH=ppc64 is using the merged
setup_64.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 08:30:25 +10:00
Paul Mackerras
09eee63471 powerpc: Move U3 IOMMU driver to arch/powerpc/sysdev
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 08:29:36 +10:00
Paul Mackerras
bfab1019b7 powerpc: Fix new-world powermac detection
My G5 was being reported as an OldWorld in /proc/cpuinfo, which is
obviously not right... :)

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 22:45:33 +10:00
Paul Mackerras
6316222ea0 powerpc: Introduce toreal/fromreal assembly macros
On 32-bit platforms, these convert from kernel virtual addresses
to real (physical addresses), like tophys/tovirt but they use
the same register for the source and destination.  On 64-bit
platforms, they do nothing because the hardware ignores the top
two bits of the address in real mode.

These new macros are used in fpu.S now.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 22:44:39 +10:00
Paul Mackerras
80579e1f4a powerpc: 32-bit CHRP SMP fixes
Untested, but "should" work...  at least this way it compiles.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 22:42:04 +10:00
Paul Mackerras
eef69e3cfb powerpc: remove duplicate screen_info from setup_32.c
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 22:21:37 +10:00
Kumar Gala
4b24b01c6c [PATCH] powerpc: Moved dcr support to arch/powerpc
Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:51:22 +10:00
Kumar Gala
cffb09ce6b [PATCH] powerpc: Fix warning related to do_dabr
do_dabr() is not relevant on 40x or Book-E processors so dont build it

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:51:19 +10:00
David Gibson
328985b2c6 [PATCH] powerpc: Don't use kmalloc() for kernel stacks
In readiness for 64k pages, when THREAD_SIZE will be less than
PAGE_SIZE, ppc64 uses kmalloc() rather than __get_free_pages() to
allocate kernel stacks, and since thread_info.h was merged, so does
ppc32.  However that adds some overhead which we don't really want
when PAGE_SIZE <= THREAD_SIZE (including all ppc32 machines), so this
patch avoids it.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:51:13 +10:00
David Gibson
2765ca2540 [PATCH] powerpc: Merge parport.h
Save for the header #define, ppc32 and ppc64 versions of parport.h are
identical.  This patch merges them.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:50:54 +10:00
David Gibson
e37bc5df8e [PATCH] powerpc: Purge bootinfo.h
With ARCH=powerpc we assume the presence of a device tree, so we don't
require any support for the old bi_recs method of passing boot
parameters.  Likewise, we've never needed it for ppc64, but we still
had an include/asm-ppc64/bootinfo.h from which nothing was used.  This
patch removes that file, and all references to it in arch/ppc64 and
arch/powerpc.  A related, unused variable 'boot_mem_size' is also
removed from setup_32.c.  The bootinfo stuff remains in ARCH=ppc for
the time being.

Built and booted on Power5 (ARCH=ppc64 and ARCH=powerpc), built for
32-bit powermac (ARCH=powerpc and ARCH=ppc).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:50:46 +10:00
David Gibson
25c8a78b1e [PATCH] powerpc: Fix handling of fpscr on 64-bit
The recent merge of fpu.S broken the handling of fpscr for
ARCH=powerpc and CONFIG_PPC64=y.  FP registers could be corrupted,
leading to strange random application crashes.

The confusion arises, because the thread_struct has (and requires) a
64-bit area to save the fpscr, because we use load/store double
instructions to get it in to/out of the FPU.  However, only the low
32-bits are actually used, so we want to treat it as a 32-bit quantity
when manipulating its bits to avoid extra load/stores on 32-bit.  This
patch replaces the current definition with a structure of two 32-bit
quantities (pad and val), to clarify things as much as is possible.
The 'val' field is used when manipulating bits, the structure itself
is used when obtaining the address for loading/unloading the value
from the FPU.

While we're at it, consolidate the 4 (!) almost identical versions of
cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S,
arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S,
arch/powerpc/kernel/misc_64.S) into a single version in fpu.S.  The
new version takes a pointer to thread_struct and applies the correct
offset itself, rather than a pointer to the fpscr field itself, again
to avoid confusion as to which is the correct field to use.

Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S
code, which it previously did not.

Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc
and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y).
Booted on G5 (ARCH=powerpc) and things which previously fell over no
longer do.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:48:50 +10:00
Paul Mackerras
fda262b897 [PATCH] ppc64: remove arch/ppc64/kernel/setup.c
and use setup_64.c from the merged tree instead.  The only difference
between them was the code to set up the syscall maps.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:20:42 +10:00
Stephen Rothwell
89edce0b4e [PATCH] powerpc: merge scatterlist.h
This depends on the 64bit dma_addr_t patch.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 16:45:52 +10:00
Stephen Rothwell
8168f902fa [PATCH] ppc64: make dma_addr_t 64 bits
There has been a need expressed for dma_addr_t to be 64 bits on PPC64.
This patch does that.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 16:45:50 +10:00
Paul Mackerras
bf20a00003 powerpc: undeprecate the old OF device tree accessors for now
The recent addition of __deprecated to the declarations for
find_devices etc. produces a whole pile of warnings from the
ppc32 code.  Since those functions still work perfectly well on
ppc32, which doesn't have hotplug support for anything in the
OF device tree, and we don't have time to fix that code now,
remove the __deprecated markings for now.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 16:45:29 +10:00
Paul Mackerras
cb4ab974ae powerpc: Remove common stuff from setup_64.c
This should have been in commit 03501dab03
but got missed by accident.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 11:08:31 +10:00
Paul Mackerras
b6a4ce526a powerpc: 32-bit powermac needs the mpc106 code
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 22:54:17 +10:00
Paul Mackerras
bd561c79dc powerpc: Fix incorrect timer register addresses in mpic.c
We were computing the wrong address for the MPIC timer registers,
so when we went to initialize them we would have been hitting some
unrelated ioremap... oops.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:55:33 +10:00
Paul Mackerras
fa39dc437a powerpc32: Limit memory to lowmem if !CONFIG_HIGHMEM.
This trims off the extra unusable memory from the lmb structure,
so we don't try to use it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:54:21 +10:00
Paul Mackerras
b41fc4f82f power: Update the multiple inclusion protection symbol on machdep.h
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:53:19 +10:00
Paul Mackerras
c49888203d powerpc: Fixes to get the Longtrail CHRP a bit further
Talk about buggy firmware...  the OF on the Longtrail returns 0
from the claim client service rather than -1 when the claim fails.
It also has no device_type on the /memory node and blows up if
the output buffer for package-to-path is too big.

This also fixes a bug with calling alloc_up with align == 0, where
we did _ALIGN_UP(alloc_bottom, 0) which will end up as 0.

Lastly, we now check the return value (in r3) from calling the
prom, and return -1 from call_prom if we get a negative value back.
That is supposed to indicate that the requested client service
doesn't exist.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:52:53 +10:00
Paul Mackerras
bbd0abda9c powerpc: Merge 32-bit CHRP support.
SMP still needs more work but UP gets as far as starting userspace
at least.  This uses the 64-bit-style code for spinning up the cpus.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:45:56 +10:00
Paul Mackerras
303d72a000 powerpc: Don't limit pmac_get_rtc_time to return only positive values
If the machine's clock is set to a bogus value, this check resulted
in userland waiting effectively forever for the RTC value to change,
so remove the check.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:22:33 +10:00
Paul Mackerras
6d0124fc06 powerpc: Fix interrupt-tree parsing
The interrupt-tree parsing code wasn't offsetting interrupt numbers
by 16 on 32-bit platforms with an i8259 interrupt controller, and
it was confused about the encoding of interrupt sense and level
(which is different for i8259 and openpic interrupt controllers,
just to make things interesting).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:19:06 +10:00
Paul Mackerras
830825d6c3 powerpc: Pull out MPC106 (grackle) initialization code into its own file
This is so that the 32-bit CHRP code can use it.  The MPC106
initialization code is now in arch/powerpc/sysdev/grackle.c and
is controlled by CONFIG_PPC_MPC106.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:16:38 +10:00
Paul Mackerras
03501dab03 powerpc: Pull common bits of setup_{32,64}.c into setup-common.c
This creates a new arch/powerpc/kernel/setup-common.c with various
bits that setup_32.c and setup_64.c had in common - functions like
machine_shutdown/restart/power_off, show_cpuinfo, set_preferred_console
etc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:11:18 +10:00
Paul Mackerras
033ef338b6 powerpc: Merge rtas.c into arch/powerpc/kernel
This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c,
which contains generic RTAS functions useful on any CHRP platform,
and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain
some pSeries-specific firmware flashing bits.  The parts of rtas.c
that are to do with pSeries-specific error logging are protected
by a new CONFIG_RTAS_ERROR_LOGGING symbol.  The inclusion of rtas.o
is controlled by the CONFIG_PPC_RTAS symbol, and the relevant
platforms select that.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:05:24 +10:00
Paul Mackerras
f9bd170a87 powerpc: Merge i8259.c into arch/powerpc/sysdev
This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:47:42 +10:00
Paul Mackerras
25635c71e4 ppc: Use the indirect_pci.c from arch/powerpc/sysdev
This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:36:55 +10:00
Michael Ellerman
d9953105ce [PATCH] powerpc: Move ras.c into arch/powerpc/platforms/pseries
ras.o is only built for CONFIG_PPC_PSERIES, so move it into
arch/powerpc/platforms/pseries. Update Makefiles to suit.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:29 +10:00
Michael Ellerman
21f35f2822 [PATCH] powerpc: Move firmware.h into include/asm-powerpc
Move firmware.h into include/asm-powerpc.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:26 +10:00
Michael Ellerman
8c71632f7a [PATCH] powerpc: Remove trailing \n" in HMT macros
GCC 3.3.3 barfs on the trailing \n" in the HMT macros.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:19 +10:00
Michael Ellerman
a6f3546ecd [PATCH] powerpc: Remove duplicate definition of set_tb()
Somewhere along the line we got two definitions of set_tb(). They look to
be identical although they're not textually identical. So remove the #ifdef
CONFIG_PPC64 version, leaving the common version in time.h.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:09 +10:00
Kumar Gala
6d7f58b04d [PATCH] powerpc: Some minor cleanups to setup_32.c
* Removed of_show_percpuinfo and just report CPU frequency in generic
  show_cpuinfo code.
* Killed OCP and PPC_SYS related code which doesn't belong in the
  merge tree

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:55:53 +10:00
Kumar Gala
0fd6f71794 [PATCH] powerpc: Add support for Book-E timer config to generic_calibrate_decr
We need to initialize some control SPRS for timers on Book-E before
we start taking decrementer interrupts.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:55:46 +10:00
Becky Bruce
ab590ccb42 [PATCH] ppc: Fix m82xx_pci build
A recent patch updated the name of pci_assign_all_busses to
pci_assign_all_buses.  This instance of its use wasn't corrected
by the original patch to use the new name.

Builds cleanly on ads8272.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:55:06 +10:00
Becky Bruce
bfbac49736 [PATCH] powerpc: Fix types.h
Powerpc: Fix types.h

I noticed that Paul had already pulled the version of types.h that
is missing the config.h include into the merge tree - this patch adds
it back in.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:54:42 +10:00
Kumar Gala
d95bbcb3a3 [PATCH] powerpc: merge include/asm-ppc*/checksum.h into include/asm-powerpc/checksum.h
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:54:31 +10:00
Kumar Gala
60dda2565b [PATCH] powerpc: some prom.c cleanups
On !CONFIG_PPC_MULTIPLATFORM _machine is defined as 0.  This is ok, but
we can't assign a value to _machine then.

We may not have CONFIG_PCI available, so only build in support for
find_parent_pci_resource(), request_OF_resource(), release_OF_resource()
if PCI is enabled.  This is probably not the long term fix but works out
for now.

Make reg_property64 contain 64-bit elements on a 32-bit machine.

Mark the deprecated prom.c functions as __deprecated.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:52:56 +10:00
Kumar Gala
d2e6151257 [PATCH] powerpc: Make sure we have an RTC before trying to adjust it
Its valid for ppc_md.set_rtc_time to be NULL.  We need to check
that its non-NULL before trying to update the RTC.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:52:37 +10:00
Stephen Rothwell
340601043d powerpc: Add a shutdown member to vio_driver
Add a shutdown member to struct vio_driver. We also need vio_bus_shutdown()
which converts from struct device to struct vio_dev and knows how to extract
the struct vio_driver.

Original patch adjusted for different location of vio.c.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 17:40:23 +10:00
Stephen Rothwell
915124d811 powerpc: set the driver.owner field for all vio drivers
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 16:59:13 +10:00
Stephen Rothwell
7c7eb28481 powerpc: iseries: Fix a bogus comment
A comment in lpevents.c refers to code that's actually in HvCallEvent.h.
The code in HvCallEvent.h is pretty obvious, so just remove the comment
altogether.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 15:42:24 +10:00