1
Commit Graph

276616 Commits

Author SHA1 Message Date
David S. Miller
d984e6197e dccp: Fix compile warning in probe code.
Commit 1386be55e3 ("dccp: fix
auto-loading of dccp(_probe)") fixed a bug but created a new
compiler warning:

net/dccp/probe.c: In function ‘dccpprobe_init’:
net/dccp/probe.c:166:2: warning: the omitted middle operand in ?: will always be ‘true’, suggest explicit middle operand [-Wparentheses]

try_then_request_module() is built for situations where the
"existence" test is some lookup function that returns a non-NULL
object on success, and with a reference count of some kind held.

Here we're looking for a success return of zero from the jprobe
registry.

Instead of fighting the way try_then_request_module() works, simply
open code what we want to happen in a local helper function.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 14:45:49 -05:00
David S. Miller
65698610f5 net: Make ndo_neigh_destroy return void.
The return value isn't used.

Suggested by Ben Hucthings.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 14:16:04 -05:00
Eric Dumazet
84f9307c5d ipv4: use a 64bit load/store in output path
gcc compiler is smart enough to use a single load/store if we
memcpy(dptr, sptr, 8) on x86_64, regardless of
CONFIG_CC_OPTIMIZE_FOR_SIZE

In IP header, daddr immediately follows saddr, this wont change in the
future. We only need to make sure our flowi4 (saddr,daddr) fields wont
break the rule.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 13:28:54 -05:00
David S. Miller
898f73585b dccp: Evaluate ip_hdr() only once in dccp_v4_route_skb().
This also works around a bogus gcc warning generated by an
upcoming patch from Eric Dumazet that rearranges the layout
of struct flowi4.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 13:28:34 -05:00
Wolfgang Grandegger
fa17a019c8 powerpc: tqm8548/tqm8xx: add and update CAN device nodes
This patch enables or updates support for the CC770 and AN82527
CAN controller on the TQM8548 and TQM8xx boards.

CC: devicetree-discuss@lists.ozlabs.org
CC: linuxppc-dev@ozlabs.org
CC: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 13:09:32 -05:00
Wolfgang Grandegger
e285e44d91 can: cc770: add platform bus driver for the CC770 and AN82527
This driver works with both, static platform data and device tree
bindings. It has been tested on a TQM855L board with two AN82527
CAN controllers on the local bus.

CC: Devicetree-discuss@lists.ozlabs.org
CC: linuxppc-dev@ozlabs.org
CC: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 13:09:31 -05:00
Wolfgang Grandegger
edd2c26ffb can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:

  insmod cc770_isa.ko port=0x310,0x380 irq=7,11

for ISA devices using I/O ports or:

  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11

for memory mapped ISA devices.

Indirect access via address and data port is supported as well:

  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11

Furthermore, the following mode parameter can be defined:

  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)

Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:

  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000

is equivalent to

  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 13:09:31 -05:00
Wolfgang Grandegger
2a367c3a82 can: cc770: add driver core for the Bosch CC770 and Intel AN82527
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 13:09:31 -05:00
Patrick Kelle
d7d75960ea icplus: mdio_write(), remove unnecessary for loop
At this point the variable j is always set to 7 and the code within
the loop has to run only once anyway.

As suggested by David Miller:
"You can simply this even further since p[7] is what is used here,
and this means len is one, the inner loop therefore executes only
once, and the p[7].field value is not used (it's zero in the table)
and the write to it is completely thrown away."

Signed-off-by: Patrick Kelle <patrick.kelle81@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 12:54:46 -05:00
Eric Dumazet
b536db9332 net: net_device flags is an unsigned int
commit b00055aacd ([NET] core: add RFC2863 operstate) changed
net_device flags from unsigned short to unsigned int.

Some core functions still assume its an unsigned short.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 11:41:48 -05:00
Axel Lin
ea1f51beff dsa: Include linux/if_ether.h to fix build error
Include linux/if_ether.h to fix below build errors:

  CC      arch/arm/mach-kirkwood/common.o
In file included from arch/arm/mach-kirkwood/common.c:19:
include/net/dsa.h: In function 'dsa_uses_dsa_tags':
include/net/dsa.h:192: error: 'ETH_P_DSA' undeclared (first use in this function)
include/net/dsa.h:192: error: (Each undeclared identifier is reported only once
include/net/dsa.h:192: error: for each function it appears in.)
include/net/dsa.h: In function 'dsa_uses_trailer_tags':
include/net/dsa.h:197: error: 'ETH_P_TRAILER' undeclared (first use in this function)
make[1]: *** [arch/arm/mach-kirkwood/common.o] Error 1
make: *** [arch/arm/mach-kirkwood] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 11:41:06 -05:00
Eric Dumazet
fc33cc7242 netem: fix build error on 32bit arches
ERROR: "__udivdi3" [net/sched/sch_netem.ko] undefined!

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 11:40:19 -05:00
sjur.brandeland@stericsson.com
8aa953d03e caif: Remove unused attributes from struct cflayer
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 23:30:48 -05:00
sjur.brandeland@stericsson.com
e977b4cf63 caif: Remove unused enum and parameter in cfserl
Remove unused enum cfcnfg_phy_type and the parameter to cfserl_create.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 23:30:48 -05:00
sjur.brandeland@stericsson.com
7c18d2205e caif: Restructure how link caif link layer enroll
Enrolling CAIF link layers are refactored.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 23:30:48 -05:00
sjur.brandeland@stericsson.com
200c5a3b38 caif: Allow cfpkt_extr_head to process empty message
Allow NULL pointer in cfpkt_extr_head in order to
skip past header data.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 23:30:47 -05:00
Hagen Paul Pfeifer
7bc0f28c7a netem: rate extension
Currently netem is not in the ability to emulate channel bandwidth. Only static
delay (and optional random jitter) can be configured.

To emulate the channel rate the token bucket filter (sch_tbf) can be used.  But
TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot
be 0. Also the idea behind TBF is that the credit (token in buckets) fills if
no packet is transmitted. So that there is always a "positive" credit for new
packets. In real life this behavior contradicts the law of nature where
nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s
link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0
seconds.

Netem is an excellent place to implement a rate limiting feature: static
delay is already implemented, tfifo already has time information and the
user can skip TBF configuration completely.

This patch implement rate feature which can be configured via tc. e.g:

	tc qdisc add dev eth0 root netem rate 10kbit

To emulate a link of 5000byte/s and add an additional static delay of 10ms:

	tc qdisc add dev eth0 root netem delay 10ms rate 5KBps

Note: similar to TBF the rate extension is bounded to the kernel timing
system. Depending on the architecture timer granularity, higher rates (e.g.
10mbit/s and higher) tend to transmission bursts. Also note: further queues
living in network adaptors; see ethtool(8).

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 23:18:35 -05:00
Jun Zhao
99d2f47aa9 ipv6 : mcast : Delete useless parameter in ip6_mc_add1_src()
Need not to used 'delta' flag when add single-source to interface
filter source list.

Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 23:10:02 -05:00
Jun Zhao
5eb81e8916 ipv4 : igmp : Delete useless parameter in ip_mc_add1_src()
Need not to used 'delta' flag when add single-source to interface
filter source list.

Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 23:10:01 -05:00
David Miller
32092ecf06 atm: clip: Use device neigh support on top of "arp_tbl".
Instead of instantiating an entire new neigh_table instance
just for ATM handling, use the neigh device private facility.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 18:51:03 -05:00
David Miller
da6a8fa027 neigh: Add device constructor/destructor capability.
If the neigh entry has device private state, it will need
constructor/destructor ops.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 18:48:03 -05:00
David Miller
869759b9e4 atm: clip: Convert over to neighbour_priv()
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 18:46:44 -05:00
David Miller
76cc714ed5 neigh: Do not set tbl->entry_size in ipv4/ipv6 neigh tables.
Let the core self-size the neigh entry based upon the key length.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 18:46:43 -05:00
David Miller
596b9b68ef neigh: Add infrastructure for allocating device neigh privates.
netdev->neigh_priv_len records the private area length.

This will trigger for neigh_table objects which set tbl->entry_size
to zero, and the first instances of this will be forthcoming.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 18:46:43 -05:00
David Miller
5b8b0060cb neigh: Get rid of neigh_table->kmem_cachep
We are going to alloc for device specific private areas for
neighbour entries, and in order to do that we have to move
away from the fixed allocation size enforced by using
neigh_table->kmem_cachep

As a nice side effect we can now use kfree_rcu().

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 18:46:43 -05:00
David Miller
1026fec873 neigh: Create mechanism for generic neigh private areas.
The implementation private sits right after the primary_key memory.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 18:46:43 -05:00
Eric Dumazet
449fa023bc sfc: fix race in efx_enqueue_skb_tso()
As soon as skb is pushed to hardware, it can be completed and freed, so
we should not dereference skb anymore.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 17:12:27 -05:00
Eric Dumazet
e983190988 bnx2: Support for byte queue limits
Changes to bnx2 to use byte queue limits.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 17:10:22 -05:00
Eric Dumazet
d8a6e65f8b tcp: inherit listener congestion control for passive cnx
Rick Jones reported that TCP_CONGESTION sockopt performed on a listener
was ignored for its children sockets : right after accept() the
congestion control for new socket is the system default one.

This seems an oversight of the initial design (quoted from Stephen)

Based on prior investigation and patch from Rick.

Reported-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Yuchung Cheng <ycheng@google.com>
Tested-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 16:55:26 -05:00
David S. Miller
de56566404 can: Revert outdated cc770 driver patches.
Newer versions have been floating about, and I applied
to older variant unfortunately.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 16:01:46 -05:00
stephen hemminger
ec2a5466b3 sky2: add bql support
This adds support for byte queue limits and aggregates statistics
update (suggestion from Eric).

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-29 20:49:21 -05:00
Dmitry Kravkov
614c76df1d bnx2x: handle iSCSI SD mode
in iSCSI SD mode to bnx2x device assigned single mac address
which is supposted to be iscsi mac. If this mode is recognized
bnx2x will disable LRO, decrease number of queues to 1 and rx ring
size to the minumum allowed by FW, this in order minimize memory use.
It will tranfer mac for iscsi usage and zero primary mac of the netdev.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 19:02:57 -05:00
Wolfgang Grandegger
7e02e5433e can: cc770: legacy CC770 ISA bus driver
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:

  insmod cc770_isa.ko port=0x310,0x380 irq=7,11

for ISA devices using I/O ports or:

  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11

for memory mapped ISA devices.

Indirect access via address and data port is supported as well:

  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11

Furthermore, the following mode parameter can be defined:

  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [CPU_DSC])
  ocr, Bus configuration register (default=0x00)
  cor, Clockout register (default=0x00)

Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:

  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000

is equivalent to

  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 18:38:48 -05:00
Wolfgang Grandegger
b440752d5d can: cc770: add driver core for the Bosch CC770 and Intel AN82527
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 18:38:47 -05:00
Robert Marklund
c7e963f688 net/smsc911x: Add regulator support
Add some basic regulator support for the power pins, as needed
by the ST-Ericsson Snowball platform that powers up the SMSC911
chip using an external regulator.

Platforms that use regulators and the smsc911x and have no defined
regulator for the smsc911x and claim complete regulator
constraints with no dummy regulators will need to provide it, for
example using a fixed voltage regulator. It appears that this may
affect (apart from Ux500 Snowball) possibly these archs/machines
that from some grep:s appear to define both CONFIG_SMSC911X and
CONFIG_REGULATOR:

- ARM Freescale mx3 and OMAP 2 plus, Raumfeld machines
- Blackfin
- Super-H

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 18:36:56 -05:00
Wolfgang Grandegger
1839a6c6f1 can: sja1000_isa: convert to platform driver to support x86_64 systems
This driver is currently not supported on x86_64 systems because the
"isa_driver" interface is used (CONFIG_ISA=y). To overcome this
limitation, the driver is converted to a platform driver, similar to
the serial 8250 driver.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 18:35:51 -05:00
RongQing.Li
e92036a651 ipv4: remove useless codes in ipmr_device_event()
Commit 7dc00c82 added a 'notify' parameter for vif_delete() to
distinguish whether to unregister the device.

When notify=1 means we does not need to unregister the device,
so calling unregister_netdevice_many is useless.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 18:32:33 -05:00
Wolfgang Grandegger
115d2a3de2 can: sja1000_isa: fix "limited range" compiler warnings
This patch fixes the compiler warnings: "comparison is always
false due to limited range of data type" by using "0xff" instead
of "-1" for unsigned values.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 18:28:55 -05:00
Igor Maravic
6977a79d36 net: Fix skb_update_prio RCU usage.
Change function rcu_dereference to rcu_dereference_bh to avoid warning

[ INFO: suspicious RCU usage. ]
-------------------------------
net/core/dev.c:2459 suspicious rcu_dereference_check() usage!

because we are locking with

rcu_read_lock_bh();

in function dev_queue_xmit(struct sk_buff *skb)

Signed-off-by: Igor Maravic <igorm@etf.rs>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 18:25:17 -05:00
Eric Dumazet
2bcc34bb98 sch_choke: use skb_flow_dissect()
Instead of using a custom flow dissector, use skb_flow_dissect() and
benefit from tunnelling support.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 13:17:03 -05:00
Eric Dumazet
11fca931d3 sch_sfq: use skb_flow_dissect()
Instead of using a custom flow dissector, use skb_flow_dissect() and
benefit from tunnelling support.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 13:17:03 -05:00
Eric Dumazet
f07d960df3 tcp: avoid frag allocation for small frames
tcp_sendmsg() uses select_size() helper to choose skb head size when a
new skb must be allocated.

If GSO is enabled for the socket, current strategy is to force all
payload data to be outside of headroom, in PAGE fragments.

This strategy is not welcome for small packets, wasting memory.

Experiments show that best results are obtained when using 2048 bytes
for skb head (This includes the skb overhead and various headers)

This patch provides better len/truesize ratios for packets sent to
loopback device, and reduce memory needs for in-flight loopback packets,
particularly on arches with big pages.

If a sender sends many 1-byte packets to an unresponsive application,
receiver rmem_alloc will grow faster and will stop queuing these packets
sooner, or will collapse its receive queue to free excess memory.

netperf -t TCP_RR results are improved by ~4 %, and many workloads are
improved as well (tbench, mysql...)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 13:17:03 -05:00
Eric Dumazet
4d77d2b567 flow_dissector: use a 64bit load/store
Le lundi 28 novembre 2011 à 19:06 -0500, David Miller a écrit :
> From: Dimitris Michailidis <dm@chelsio.com>
> Date: Mon, 28 Nov 2011 08:25:39 -0800
>
> >> +bool skb_flow_dissect(const struct sk_buff *skb, struct flow_keys
> >> *flow)
> >> +{
> >> +	int poff, nhoff = skb_network_offset(skb);
> >> +	u8 ip_proto;
> >> +	u16 proto = skb->protocol;
> >
> > __be16 instead of u16 for proto?
>
> I'll take care of this when I apply these patches.

( CC trimmed )

Thanks David !

Here is a small patch to use one 64bit load/store on x86_64 instead of
two 32bit load/stores.

[PATCH net-next] flow_dissector: use a 64bit load/store

gcc compiler is smart enough to use a single load/store if we
memcpy(dptr, sptr, 8) on x86_64, regardless of
CONFIG_CC_OPTIMIZE_FOR_SIZE

In IP header, daddr immediately follows saddr, this wont change in the
future. We only need to make sure our flow_keys (src,dst) fields wont
break the rule.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 13:17:03 -05:00
Tom Herbert
c3940999b2 sfc: Support for byte queue limits
Changes to sfc to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:20 -05:00
Tom Herbert
2df1a70aaf bnx2x: Support for byte queue limits
Changes to bnx2x to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:20 -05:00
Tom Herbert
298376d3e8 tg3: Support for byte queue limits
Changes to tg3 to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:20 -05:00
Tom Herbert
b8bfca9439 forcedeth: Support for byte queue limits
Changes to forcedeth to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:20 -05:00
Tom Herbert
3f0cfa3bc1 e1000e: Support for byte queue limits
Changes to e1000e to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:19 -05:00
Tom Herbert
114cf58021 bql: Byte queue limits
Networking stack support for byte queue limits, uses dynamic queue
limits library.  Byte queue limits are maintained per transmit queue,
and a dql structure has been added to netdev_queue structure for this
purpose.

Configuration of bql is in the tx-<n> sysfs directory for the queue
under the byte_queue_limits directory.  Configuration includes:
limit_min, bql minimum limit
limit_max, bql maximum limit
hold_time, bql slack hold time

Also under the directory are:
limit, current byte limit
inflight, current number of bytes on the queue

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:19 -05:00
Tom Herbert
927fbec13e xps: Add xps_queue_release function
This patch moves the xps specific parts in netdev_queue_release into
its own function which netdev_queue_release can call.  This allows
netdev_queue_release to be more generic (for adding new attributes
to tx queues).

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:19 -05:00