pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.
In particular, pSeries_lpar_hpte_insert() goes from 185 instructions
to 77 instructions as a result of this patch. Luckily that code
isn't called very often ...
With CONFIG_DYNAMIC_DEBUG=y:
size before:
text data bss dec hex filename
7284 1552 296 9132 23ac platforms/pseries/lpar.o
size after:
text data bss dec hex filename
5806 1096 296 7198 1c1e platforms/pseries/lpar.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix usage of bios intcall()
x86: Remove unused function lapic_watchdog_ok()
x86: Remove unused variable disable_x2apic
x86, kvm: Fix section mismatches in kvm.c
x86: Add missing annotation to arch/x86/lib/copy_user_64.S::copy_to_user
x86: Fix fixmap page order for FIX_TEXT_POKE0,1
amd-iommu: set evt_buf_size correctly
amd-iommu: handle alias entries correctly in init code
x86: Fix printk call in print_local_apic()
x86: Declare check_efer() before it gets used
x86: Mark device_nb as static and fix NULL noise
x86: Remove double declaration of MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1
xen: Use kcalloc() in xen_init_IRQ()
x86: Fix fixmap ordering
x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (39 commits)
Revert "p54: Use SKB list handling helpers instead of by-hand code."
sctp: fix warning at inet_sock_destruct() while release sctp socket
tun/tap: Fix crashes if open() /dev/net/tun and then poll() it.
dsa: fix 88e6xxx statistics counter snapshotting
forcedeth: Fix NAPI race.
drivers/net/smsc911x.c: Fix resource size off by 1 error
pcnet_cs: add new id
bnx2x: Fix the maximal values of coalescing timeouts.
bnx2x: Disable HC coalescing when setting timeout to zero.
tun: Fix device unregister race
be2net: fix spurious interrupt handling in intx mode
e1000e: disable K1 at 1000Mbps for 82577/82578
e1000e: delay second read of PHY_STATUS register on failure of first read
e1000e: prevent NVM corruption on sectors larger than 4K
e1000e: do not write SmartSpeed register bits on parts without support
e1000e: delay after LCD reset and proper checks for PHY configuration done
e1000e: PHY loopback broken on 82578
ixgbe: Not allow 8259x unsupported wol options change from ethtool
ixgbe: fix inconsistent SFP/SFP+ failure results.
ixgbe: fix regression on some 82598 adapters
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: Fix IRQ swizzling for ARI-enabled devices
ia64/PCI: adjust section annotation for pcibios_setup()
x86/PCI: get root CRS before scanning children
x86/PCI: fix boundary checking when using root CRS
PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume
PCI MSI: Unmask MSI if setup failed
PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names
PCI: make pci_name() take const argument
PCI: More PATA quirks for not entering D3
PCI: fix kernel-doc warnings
PCI: check if bus has a proper bridge device before triggering SBR
PCI: remove pci_dac_dma_... APIs on mn10300
PCI ECRC: Remove unnecessary semicolons
PCI MSI: Return if alloc_msi_entry for MSI-X failed
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix cast warning for init.c
microblaze: Wire up new syscalls
microblaze: use generic syscalls.h
microblaze: clean up signal handling
microblaze: convert all simple headers to use asm-generic
microblaze: use the generic lib/checksum.c
microblaze: fall back on generic header files for the ABI
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
SLAB: Fix lockdep annotations
fix RCU-callback-after-kmem_cache_destroy problem in sl[aou]b
* git://git.infradead.org/iommu-2.6:
intel-iommu: Don't use identity mapping for PCI devices behind bridges
intel-iommu: Use iommu_should_identity_map() at startup time too.
intel-iommu: No mapping for non-PCI devices
intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers
intel-iommu: Add iommu_should_identity_map() function
intel-iommu: Fix reattaching of devices to identity mapping domain
intel-iommu: Don't set identity mapping for bypassed graphics devices
intel-iommu: Fix dma vs. mm page confusion with aligned_nrpages()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
firewire: core: do not DMA-map stack addresses
This way they'll be properly initialized early enough for users that may
touch them before the framebuffer has been registered.
Drivers that allocate their fb_info structure some other way (like
matrocfb's broken static allocation) need to be fixed up appropriately.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_execve() and ptrace_attach() return -EINTR if
mutex_lock_interruptible(->cred_guard_mutex) fails.
This is not right, change the code to return ERESTARTNOINTR.
Perhaps we should also change proc_pid_attr_write().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In include/linux/sysrq.h the constant EINVAL is being used but is undefined
if include/linux/errno.h is not included before.
Fix this by adding #include <linux/errno.h> at the beginning.
Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These warnings were observed on MIPS32 using 2.6.31-rc1 and gcc-4.2.0:
mm/page_alloc.c: In function 'alloc_pages_exact':
mm/page_alloc.c:1986: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast
drivers/usb/mon/mon_bin.c: In function 'mon_alloc_buff':
drivers/usb/mon/mon_bin.c:1264: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast
[akpm@linux-foundation.org: fix kernel/perf_counter.c too]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In testing a backport of the write_begin/write_end AOPs, a 10% re-read
regression was noticed when running iozone. This regression was
introduced because the old AOPs would always do a mark_page_accessed(page)
after the commit_write, but when the new AOPs where introduced, the only
place this was kept was in pagecache_write_end().
This patch does the same thing in the generic case as what is done in
pagecache_write_end(), which is just to mark the page accessed before we
do write_end().
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the multithread program core thread message error.
This issue affects arches with neither has CORE_DUMP_USE_REGSET nor
ELF_CORE_COPY_TASK_REGS, ARM is one of them.
The thread message of core file is generated in elf_dump_thread_status.
The register values is set by elf_core_copy_task_regs in this function.
If an arch doesn't define ELF_CORE_COPY_TASK_REGS,
elf_core_copy_task_regs() will do nothing. Then the core file will not
have the register message of thread.
So add elf_core_copy_regs to set regiser values if ELF_CORE_COPY_TASK_REGS
doesn't define.
The following is how to reproduce this issue:
cat 1.c
#include <stdio.h>
#include <pthread.h>
#include <assert.h>
void td1(void * i)
{
while (1)
{
printf ("1\n");
sleep (1);
}
return;
}
void td2(void * i)
{
while (1)
{
printf ("2\n");
sleep (1);
}
return;
}
int
main(int argc,char *argv[],char *envp[])
{
pthread_t t1,t2;
pthread_create(&t1, NULL, (void*)td1, NULL);
pthread_create(&t2, NULL, (void*)td2, NULL);
sleep (10);
assert(0);
return (0);
}
arm-xxx-gcc -g -lpthread 1.c -o 1
copy 1.c and 1 to a arm board.
Goto this board.
ulimit -c 1800000
./1
# ./1
1
2
1
...
...
1
1: 1.c:37: main: Assertion `0' failed.
Aborted (core dumped)
Then you can get a core file.
gdb 1 core.xxx
Without the patch:
(gdb) info threads
3 process 909 0x00000000 in ?? ()
2 process 908 0x00000000 in ?? ()
* 1 process 907 0x4a6e2238 in raise () from /lib/libc.so.6
You can found that the pc of 909 and 908 is 0x00000000.
With the patch:
(gdb) info threads
3 process 885 0x4a749974 in nanosleep () from /lib/libc.so.6
2 process 884 0x4a749974 in nanosleep () from /lib/libc.so.6
* 1 process 883 0x4a6e2238 in raise () from /lib/libc.so.6
The pc of 885 and 884 is right.
Signed-off-by: Hui Zhu <teawater@gmail.com>
Cc: Amerigo Wang <xiyou.wangcong@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I run many ffsb test cases on JBODs (typically 13/12 disks). Comparing
with kernel 2.6.30, 2.6.31-rc1 has about 16% regression with
ffsb_create_4k. The sub test case creates files continuously for 10
minitues and every file is 1MB.
Bisect located below patch.
5cee5815d1 is first bad commit
commit 5cee5815d1
Author: Jan Kara <jack@suse.cz>
Date: Mon Apr 27 16:43:51 2009 +0200
vfs: Make sys_sync() use fsync_super() (version 4)
It is unnecessarily fragile to have two places (fsync_super() and do_sync())
doing data integrity sync of the filesystem. Alter __fsync_super() to
accommodate needs of both callers and use it. So after this patch
__fsync_super() is the only place where we gather all the calls needed to
properly send all data on a filesystem to disk.
As a matter of fact, ffsb calls sys_sync in the end to make sure all data
is flushed to disks and the flushing is counted into the result. vmstat
shows ffsb is blocked when syncing for a long time. With 2.6.30, ffsb is
blocked for a short time.
I checked the patch and did experiments to recover the original methods.
Eventually, the root cause is the patch deletes the calling to
wakeup_pdflush when syncing, so only ffsb is blocked on disk I/O.
wakeup_pdflush could ask pdflush to write back pages with ffsb at the
same time.
[akpm@linux-foundation.org: restore comment too]
Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When i2c_smbus_read_byte_data fails in ds1374_work, we forgot to unlock
the held lock. Fix that.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a typo in the VLYNQ bus driver Kconfig which prevented to turn on
VLYNQ bus debugging.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a typo in the vlynq bus driver which was missing the CONFIG_ prefix to
turn on debugging code.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove redundant call to the sisfb_get_fix() before sis frambuffer is
registered.
This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The prototypes in syscalls.h all make sense for
microblaze, but for some of them, the actual implementation
in sys_microblaze.c needs to be adapted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
When legacy signal handling is disabled, the
arch/microblaze/kernel/signal.c implementation can
be much simpler, as most of it is handled generically
from kernel/signal.c.
This is also a prerequisite for using the generic
asm/unistd.h, which does not provide __NR_sigreturn,
because this macro is referenced by the current signal.c
implementation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
All the simple microblaze header files were adapted to use their
asm-generic implementations. These files are more simple and were quite
straightforward to change.
fb.h, vga.h and parport.h previously did not exist, using
the generic version makes it possible to build more drivers
successfully in allyesonfig.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The microblaze checksum code is mostly identical to
the asm-generic+lib version, so use that instead.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Almost all of the ABI relevant header files now have generic
versions, so use those now in order to reduce the amount
of architecture specific code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The bit that tells us whether a statistics counter snapshot operation
has completed is located in the GLOBAL register block, not in the
GLOBAL2 register block, so fix up mv88e6xxx_stats_wait() to poll the
right register address.
Signed-off-by: Stephane Contri <Stephane.Contri@grassvalley.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet a écrit :
> Ingo Molnar a écrit :
>>> The following changes since commit 5298976562:
>>> Linus Torvalds (1):
>>> Merge git://git.kernel.org/.../davem/net-2.6
>>>
>>> are available in the git repository at:
>>>
>>> master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git master
>> Hm, something in this lot quickly wrecked networking here - see the
>> tx timeout dump below. It starts with:
>>
>> [ 351.004596] WARNING: at net/sched/sch_generic.c:246 dev_watchdog+0x10b/0x19c()
>> [ 351.011815] Hardware name: System Product Name
>> [ 351.016220] NETDEV WATCHDOG: eth0 (forcedeth): transmit queue 0 timed out
>>
>> Config attached. Unfortunately i've got no time to do bisection
>> today.
>
>
>
> forcedeth might have a problem, in its netif_wake_queue() logic, but
> I could not see why a recent patch could make this problem visible now.
>
> CPU0/1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
> is not a new cpu either :)
>
> forcedeth uses an internal tx_stop without appropriate barrier.
>
> Could you try following patch ?
>
> (random guess as I dont have much time right now)
We might have a race in napi_schedule(), leaving interrupts disabled forever.
I cannot test this patch, I dont have the hardware...
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call resource_size(res) returns res->end - res->start + 1 and thus the
second change is semantics-preserving. res_size is then used as the second
argument of a call to request_mem_region, and the memory allocated by this
call appears to be the same as what is released in the two calls to
release_mem_region. So the size argument for those calls should be
resource_size(size) as well. Alternatively, in the second call to
release_mem_region, the second argument could be res_size, as that variable
has already been initialized at the point of this call.
The problem was found using the following semantic patch:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
struct resource *res;
@@
- (res->end - res->start) + 1
+ resource_size(res)
@@
struct resource *res;
@@
- res->end - res->start
+ BAD(resource_size(res))
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
add new id (RIOS System PC CARD3 ETHERNET).
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch properly defines the maximum values for rx/tx coalescing timeouts.
Signed-off-by: Vlad Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Problem reported by Flavio Leitner <fleitner@redhat.com>:
When setting rx/tx coalescing timeout to the values less than 12 traffic was
stopped.
The FW supports coalescing in 12us granularity, and so value of less then 12
should be interpreted as disabling coalescing
Signed-off-by: Vlad Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is currently possible for an asynchronous device unregister
to cause the same tun device to be unregistered twice. This
is because the unregister in tun_chr_close only checks whether
__tun_get(tfile) != NULL. This however has nothing to do with
whether the device has already been unregistered. All it tells
you is whether __tun_detach has been called.
This patch fixes this by using the most obvious thing to test
whether the device has been unregistered.
It also moves __tun_detach outside of rtnl_unlock since nothing
that it does requires that lock.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The extraction routine for the MPC718 "firmware" had 2 bugs in it, where one
bug masked the effect of the other. The loop iteration should have set
$prevlen = $currlen at the end of the loop, and the if() check should have used
&& instead of || for deciding if the firmware length is reasonable.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is one path with omitted unlock in si470x_fops_release. Fix that.
Cc: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is one omitted unlock in em28xx_usb_probe. Fix that.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Discovered the bug that were limiting the output format to just RGB565.
Now, it is possible to output image at Bayer format (the original one,
as generated by Silvercrest sensor, and two others), and also on YUY.
Adds Bayer formats also to the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
