This patch changes the old map_size parameter of alloc_pte
to a page_size parameter which can be used more easily to
alloc a pte for intermediate page sizes.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch changes the implementation of of
kvm_iommu_map_pages to map the pages with the host page size
into the io virtual address space.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-By: Avi Kivity <avi@redhat.com>
This patch changes the iommu-api functions for mapping and
unmapping page ranges to use the new page-size based
interface. This allows to remove the range based functions
later.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds new callbacks for mapping and unmapping
pages to the iommu_ops structure. These callbacks are aware
of page sizes which makes them different to the
->{un}map_range callbacks.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
These two functions provide support for mapping and
unmapping physical addresses to io virtual addresses. The
difference to the iommu_(un)map_range() is that the new
functions take a gfp_order parameter instead of a size. This
allows the IOMMU backend implementations to detect easier if
a given range can be mapped by larger page sizes.
These new functions should replace the old ones in the long
term.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The new function pointer names match better with the
top-level functions of the iommu-api which are using them.
Main intention of this change is to make the ->{un}map
pointer names free for two new mapping functions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This marks the guest single-step API improvement of 94fe45da and
91586a3b with a capability flag to allow reliable detection by user
space.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: stable@kernel.org (2.6.33)
Signed-off-by: Avi Kivity <avi@redhat.com>
We intercept #BP while in guest debugging mode. As VM exits due to
intercepted exceptions do not necessarily come with valid
idt_vectoring, we have to update event_exit_inst_len explicitly in such
cases. At least in the absence of migration, this ensures that
re-injections of #BP will find and use the correct instruction length.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: stable@kernel.org (2.6.32, 2.6.33)
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes emulate_syscall(), emulate_sysenter() and
emulate_sysexit() to handle injected faults properly.
Even though original code injects faults in these functions,
we cannot handle these unless we use the different return
value from the UNHANDLEABLE case. So this patch use X86EMUL_*
codes instead of -1 and 0 and makes x86_emulate_insn() to
handle these propagated faults.
Be sure that, in x86_emulate_insn(), goto cannot_emulate and
goto done with rc equals X86EMUL_UNHANDLEABLE have same effect.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add proper error and permission checking. This patch also change task
switching code to load segment selectors before segment descriptors, like
SDM requires, otherwise permission checking during segment descriptor
loading will be incorrect.
Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch injects page fault when reading descriptor in
load_guest_segment_descriptor() fails with FAULT.
Effects of this injection: This function is used by
kvm_load_segment_descriptor() which is necessary for the
following instructions:
- mov seg,r/m16
- jmp far
- pop ?s
This patch makes it possible to emulate the page faults
generated by these instructions. But be sure that unless
we change the kvm_load_segment_descriptor()'s ret value
propagation this patch has no effect.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Inject #UD if guest attempts to do so. This is in accordance to Intel
SDM.
Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The i8254/i8259 locks need to be real spinlocks on preempt-rt. Convert
them to raw_spinlock. No change for !RT kernels.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
These features are unused by modern userspace and can go away. Paravirt
mmu needs to stay a little longer for live migration.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instructions which are not allowed to have LOCK prefix should
generate #UD if one is used.
[avi: fold opcode 82 fix from another patch]
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add CPL checking in case emulator is tricked into emulating
privilege instruction from userspace.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
POPF behaves differently depending on current CPU mode. Emulate correct
logic to prevent guest from changing flags that it can't change otherwise.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Make emulator check that vcpu is allowed to execute IN, INS, OUT,
OUTS, CLI, STI.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently when x86 emulator needs to access memory, page walk is done with
broadest permission possible, so if emulated instruction was executed
by userspace process it can still access kernel memory. Fix that by
providing correct memory access to page walker during emulation.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
For some instructions CPU behaves differently for real-mode and
virtual 8086. Let emulator know which mode cpu is in, so it will
not poke into vcpu state directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Use groups mechanism to decode 0F C7 instructions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Use groups mechanism to decode 0F BA instructions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
wqh is unused, so we do not need to store it in irqfd anymore
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Old method prematurely sets ESR and DEAR.
Move this part after we decide to inject interrupt,
which is more like hardware behave.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollis@penguinppc.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
If KVM_CREATE_IRQCHIP fail due to kvm_setup_default_irq_routing(),
ioapic device is not destroyed and kvm->arch.vioapic is not set to
NULL, this may cause KVM_GET_IRQCHIP and KVM_SET_IRQCHIP access to
unexcepted memory.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure
due to cannot register io dev.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If fail to create pit, we should unregister kvm irq notifier
which register in kvm_create_pit().
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Following the new SDM. Now the bit is named "Ignore PAT memory type".
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_emulate_pio() and complete_pio() both read out the
RAX register value and copy it to a place into which
the value read out from the port will be copied later.
This patch removes this redundancy.
/*** snippet from arch/x86/kvm/x86.c ***/
int complete_pio(struct kvm_vcpu *vcpu)
{
...
if (!io->string) {
if (io->in) {
val = kvm_register_read(vcpu, VCPU_REGS_RAX);
memcpy(&val, vcpu->arch.pio_data, io->size);
kvm_register_write(vcpu, VCPU_REGS_RAX, val);
}
...
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently KVM pretends that pages with EPT mappings never got
accessed. This has some side effects in the VM, like swapping
out actively used guest pages and needlessly breaking up actively
used hugepages.
We can avoid those very costly side effects by emulating the
accessed bit for EPT PTEs, which should only be slightly costly
because pages pass through page_referenced infrequently.
TLB flushing is taken care of by kvm_mmu_notifier_clear_flush_young().
This seems to help prevent KVM guests from being swapped out when
they should not on my system.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a generic function to find out the
host page size for a given gfn. This function is needed by
the kvm iommu code. This patch also simplifies the x86
host_mapping_level function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
msr was tested above, so the second test is not needed.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@
if (x == NULL || ...) {
... when forall
return ...; }
... when != goto l;
when != x = e
when != &x
*x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Avi Kivity <avi@redhat.com>
String constants that are continued on subsequent lines with \
are not good.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes kvm_fix_hypercall() to propagate X86EMUL_*
info generated by emulator_write_emulated() to its callers:
suggested by Marcelo.
The effect of this is x86_emulate_insn() will begin to handle
the page faults which occur in emulator_write_emulated():
this should be OK because emulator_write_emulated_onepage()
always injects page fault when emulator_write_emulated()
returns X86EMUL_PROPAGATE_FAULT.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch fixes load_guest_segment_descriptor() to return
X86EMUL_PROPAGATE_FAULT when it tries to access the descriptor
table beyond the limit of it: suggested by Marcelo.
I have checked current callers of this helper function,
- kvm_load_segment_descriptor()
- kvm_task_switch()
and confirmed that this patch will change nothing in the
upper layers if we do not change the handling of this
return value from load_guest_segment_descriptor().
Next step: Although fixing the kvm_task_switch() to handle the
propagated faults properly seems difficult, and maybe not worth
it because TSS is not used commonly these days, we can fix
kvm_load_segment_descriptor(). By doing so, the injected #GP
becomes possible to be handled by the guest. The only problem
for this is how to differentiate this fault from the page faults
generated by kvm_read_guest_virt(). We may have to split this
function to achive this goal.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
flexpriority_enabled implies cpu_has_vmx_virtualize_apic_accesses() returning
true, so we don't need this check here.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Record failed msrs reads and writes, and the fact that they failed as well.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
- data is 64 bits wide, not unsigned long
- rw is confusingly named
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On HW task switch newly loaded segments should me marked as accessed.
Reported-by: Lorenzo Martignoni <martignlo@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When cr0.mp is clear, the guest doesn't expect a #NM in response to
a WAIT instruction. Because we always keep cr0.mp set, it will get
a #NM, and potentially be confused.
Fix by keeping cr0.mp set only when the fpu is inactive, and passing
it through when inactive.
Reported-by: Lorenzo Martignoni <martignlo@gmail.com>
Analyzed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit 55fb1027c1cf9797dbdeab48180da530e81b1c39 doesn't update tlbcfg correctly.
Fix it.
And since guest OS likes 'fixed' hardware,
initialize tlbcfg everytime when guest access is useless.
So move this part to init code.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit 513579e3a3 change the way
we emulate PVR/PIR,
which left PVR/PIR uninitialized on E500, and make guest puzzled.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
