This code was added as part of a bigger feature which was never
upstreamed, so remove this code.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Notifies the user which device was removed. It is important in
a server with multiple devices.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
flags in struct wait_interrupt_data is not used anywhere so remove it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Traces the DMA [un]map_sgtable using the new traces we added.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
asic_dma_{un}map_single() asic-specific functions are no longer called
from the common code, so delete these functions.
In addition, delete the gaudi2 implementation as they are also not
called.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
There are cases such when FW runs MBIST, that preboot is expected to take
longer than the usual. In such cases the firmware reports status
SECURITY_READY/IN_PREBOOT and we extend the timeout waiting for it.
This is currently implemented for Gaudi2 only.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add debug prints to dump the content of the SG table which is prepared
when the dma-buf map op is called.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
On devices with virtual device memory (Gaudi2 onwards), user can provide
an offset within an allocated device memory from which he wants to
export a dma-buf object.
The offset value is verified by driver, but it is not taken into
consideration when the importer driver maps the dma-buf and the SG table
it prepared.
Add the missing offset handling.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The device_address member of 'struct hl_dmabuf_priv' is used only when
virtual device memory is not supported and dma-buf is exported from
address.
Set the value of this field only when it is relevant, and add "phys" to
its name so it would be clearer that it can't be a device virtual
address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In some cases the calculated number of required entries for the dma-buf
SG table is wrong. For example, if the page size is larger than both the
dma max segment size of the importer device and from the exported side,
or if the exported size is part of a phys_pg_pack that is composed of
several pages.
In these cases, redundant entries will be added to the SG table.
Modify the method that the number of entries is calculated, and the way
they are prepared.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently driver maintain one list for both pending user interrupts
which seeks to wait till CQ reaches it's target value and also the ones
that seeks to get timestamp records when the CQ reaches it's target
value.
This causes delay in handling the waiters which gets higher priority
than the timestamp records.
In order to solve this, let's split the list into two,
one for each case and each one is protected by it's own spinlock.
Waiters will be handled within the interrupt context first,
then the timestamp records will be set.
Freeing the timestamp related memory will be handled in a workqueue.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently we use dynamic allocation inside the irq handler
in order to allocate free node to be used for the free jobs.
This operation is expensive, especially when we deal with large
burst of events records that get released at the same time.
The alternative is to have pre allocated pool of free nodes
and just fetch nodes from this pool at irq handling time instead
of allocating them.
In case the pool becomes full, then the driver will fallback to
dynamic allocations.
As part of the optimization also update the unregister flow
upon re-using a timestamp record, by making the operation much
simpler and quicker. We already have the record in the registration
flow and now we just seek to re-use with different interrupt.
Therefore, no need to look for buffer according to the user handle.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a potential race between user thread seeking to re-use
a timestamp record with new interrupt id, while this record is still
in the middle of interrupt handling and it is about to be freed.
Imagine the driver set the record in_use to 0 and only then fill the
free_node information. This might lead to unpleasant scenario where
the new registration thread detects the record as free to use, and
change the cq buff address. That will cause the free_node to get
the wrong buffer address to put refcount to.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
alloc_sgt_from_device_pages() includes relatively many parameters, and
in a subsequent change another offset parameter is going to be added.
Using structure fields directly when calling this function, and in
hl_map_dmabuf() it is done twice, makes it a little bit difficult to
understand the meaning of the parameters.
To make it clearer, assign the required values into local variables with
explicit names, and use the variables when calling the function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is currently allowed for a user to export dma-buf with size and
offset that are not multiples of PAGE_SIZE.
The exported memory is mapped for the importer device, and there it will
be rounded to PAGE_SIZE, leading to actually exporting more than the
user intended to.
To make the user be aware of it, accept only size and offset which are
multiple of PAGE_SIZE.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The 'exported_size' member in 'struct hl_vm_phys_pg_pack' is used to
keep the exported dma-buf size, to be later used when the buffer is
mapped.
However it is possible that the same phys_pg_pack will be exported more
than once, and independently of when the mapping takes place.
Remove this member from the phys_pg_pack structure, and simply use the
size in the dma-buf object as the exported size when mapping.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For Gaudi1 the exported dma-buf is always composed of a single page, and
therefore the exported size is equal to this page's size.
When calling alloc_sgt_from_device_pages(), we pass 0 as the exported
size and internally calculate it as "number of pages * page size".
This makes alloc_sgt_from_device_pages() less clear, because the
exported size parameter is not understood as a restriction on the pages'
size.
Modify to always pass the exported size explicitly.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After the heartbeat mechanism is now expanded to be used also
for EQ health check, we shouldn't send heartbeat messages
to FW before driver allow events to be received from FW.
Because if the driver will send two heartbeats before it enables
events to be received from FW, then the EQ health check
will fail and reset the device.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is the second patch for applying the eq health check mechanism
which will add support for the interrupt flow for gaudi2 asic.
More info about the interrupt mechanism:
set a dedicated msix for the eq error interrupt, and add
interrupt handler for it.
when FW detects some issue with EQ like EQ_FULL, it'll
raise that interrupt and driver should reset the device.
Driver will inform the FW which msix index to use through
the already existing handshake mechanism which will
send msix info message to fw.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add mechanism for fw eq health check. this will be done using two flows:
using the heartbeat mechanism and raising a dedicated interrupt to
indicate an eq failure like EQ full.
This patch will add implementation for the eq heartbeat for gaudi2 asic.
More info about the heartbeat mechanism:
Expand the heartbeat mechanism to monitor a new event that
will be sent from FW upon receiving heartbeat message.
that way driver can know that the eq is working or not.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add tsc clock to clock sync info, to enable using this clock for
sampling and sync it with device time.
Signed-off-by: Hen Alon <halon@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because it is not used and also, for graceful reset to work
those ioctls should run on the compute device.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The CPUCP interface is moved to a shared folder outside of accel as
a pre-requisite to upstream the NIC drivers that will also include
this file.
Signed-off-by: David Meriin <dmeriin@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During ECC event handling, Memory wrapper id was mistakenly
printed as block id. Fix the print and in addition fetch the actual
block-id from firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
coresight ETF blocks have different size. As a result, sync packets
need to be aligned based on fifo size.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
There is likely no bug happening in this case since HL_STR_MAX is
strictly larger than all source strings. Nonetheless, prefer a safer and
more robust interface.
It should also be noted that `strscpy` will not pad like `strncpy`. If
this NUL-padding behavior is _required_ we should use `strscpy_pad`
instead of `strscpy`.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.
In order to avoid too large values for 'str_size' (and potential negative
values for "PSOC_RAZWI_ENG_STR_SIZE - str_size") use scnprintf()
instead of snprintf().
Fixes: c0e6df9160 ("accel/habanalabs: fix address decode RAZWI handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We see that `prop->cpucp_info.card_name` is supposed to be
NUL-terminated based on its usage within `__hwmon_device_register()`
(wherein it's called "name"):
| if (name && (!strlen(name) || strpbrk(name, "-* \t\n")))
| dev_warn(dev,
| "hwmon: '%s' is not a valid name attribute, please fix\n",
| name);
A suitable replacement is `strscpy_pad` [2] due to the fact that it
guarantees both NUL-termination and NUL-padding on its destination
buffer.
NUL-padding on `prop->cpucp_info.card_name` is not strictly necessary as
`hdev->prop` is explicitly zero-initialized but should be used
regardless as it gets copied out to userspace directly -- as per Kees'
suggestion.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When config_etr or config_etf are called we need to validate the
parameters that are passed into them to make sure the requested
operation is valid.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because firmware is blocking PSOC_ARC_DBG, we need to disable access
to this block.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The soft reset has transitioned to CPUCP packet instead of plain
register write and is about to be removed from the struct cpu_dyn_regs.
As a preparation for removing the cpu_rst_status field from
struct cpu_dyn_regs, switch to use the plain macro - this keeps the
backward compatibility.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To use drm_ioctl(), move the ioctls to the device specific ioctls
range at [DRM_COMMAND_BASE, DRM_COMMAND_END).
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Register the compute device as an accel device, and remove the creation
of the habanalabs compute char device.
The IOCTLs in this patch are still handled by the current driver
handler. Moving to DRM IOCTL handling requires moving the IOCTLs
numbers to a specific range, so it will be handled in subsequent
patches.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User gets notification for every engine error report, but he still
lacks the exact engine information. Hence, we allow user to query
for the exact engine reported an error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After being notified about certain errors, user is expected to finish
his post-errors actions and to release the device within some timeout,
after which is deice is being reset.
The default timeout value is 5 sec, which in some case is not enough for
a user application to collect debug data.
Increase the default value to 30 sec.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is possible for FW to request reserved space in dram.
If the device supports this option, it will retrieve the size from the
f/w and will reserve it.
Currently we add the common code infrastructure to support it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If we are initializing the kernel context when we have a Gaudi2 device,
we don't need to do any late initializing of that context with
specific Gaudi2 code.
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The soft reset has transitioned to CPUCP packet instead of plain
register write and is about to be removed from the struct cpu_dyn_regs.
As a preparation for removing the gic_host_soft_rst_irq field from
struct cpu_dyn_regs, switch to use the plain macro - this keeps the
backward compatibility.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As TPC kernels now must use those registers we unsecure them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The F/W dynamically allocates one of the PSOC scratchpad registers for
the engine cores, so they can raise events towards the F/W.
To allow the engine cores to access this register, this register must be
non-secured.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Now that the driver core allows for struct class to be in read-only
memory, move the accel_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add dump of an error reported from f/w during boot time.
This error indicates a failure with setting temperature threshold.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If scrubbing memory after user released device has failed it means
the device is in a bad state and should be reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Our simulator supports idle check so no need anymore to check if pdev
exists.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
When the driver needs to abort waiters for interrupts, for cases
such as critical events that occur and driver need to do hard reset,
in such scenario the driver will complete the fence to wake up the
waiting thread, and will set the fence error indication.
The return value of the completion API will be greater than 0
since it will return the timeout, but as this indicates successful
completion, the driver should mark it as aborted.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Protect against concurrency of user requesting to register a timestamp
offset (where the driver fills the timestamp when the command submission
has finished executing) to a specific user interrupt ID. The
protection is basically to allow only one timestamp registration
request to be handled at a time.
This is needed because the user can decide to re-use a timestamp
offset (register an already registered offset, to a different
interrupt ID). This means the request will cause the timestamp node to
move from one interrupt list to another interrupt list. In such
scenario, without proper protection, we could end up adding the same
node twice to the interrupts wait lists.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Every time an FD is returned to the user, the driver adds
a corresponding private structure to the list.
Yet, it's still a list of private structures rather than of FDs.
Remove, as well, an unnecessary comment.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because we might still be using related resources, decrementing PID's
reference count should be done at later stages of the device release.
A good place is right after the representing private structure is
removed from LKD's list.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As part of driver teardown, we attempt to kill all user processes.
It shouldn't fail, but if it does we want to print the error code that
the kapi returned to us.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The preboot used to statically allocate memory for the comms descriptor
on the device memory when driver requested the descriptor information.
Now preboot moved to dynamic memory allocation where it wants to check
the size the driver expects vs. what the f/w expects.
Note there are no backward compatibility issues as older f/w versions
simply ignore this value.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because in this case we have only a single possible cause, we can
safely stop fetching the cause from firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_device_status() returns the status of an acquired device.
If a device is going down (following an rmmod cmd),
it should be marked as an unusable/malfunctioning device, and
hence should not be acquired.
However, since this was not the case so far (i.e., a device going
down would inaccurately return 'in reset' status allowing the user
to acquire the device) it introduced a bug where as part of a reset
flow, the driver could not kill processes that have not run yet, and
since those processes aren't blocked from reacquiring a device,
we get eventually a new flow of a driver attempting to kill all
processes in a list that can't be ever really empty.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is useful for debug to know which user process have acquired the
device.
Add this info to the relevant debug print, in addition to the already
printed user context's ASID.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When an ioctl fails, it is useful to know what is the task command name
and the full ioctl request code, in addition to the task pid and the
ioctl number.
Add the additional information to the relevant debug error prints.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order for user to be aware of undefined opcode events, we must
store all relevant information and notify user about the failure.
The user will fetch the stored info via info ioctl.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If hl_device_cond_reset() is called while a reset is already pending but
hasn't started, the reset request will be dropped.
If the flags of the new request are more severe, e.g. a hard reset while
the pending reset is a compute reset, the eventual reset won't be
suitable for the device status.
To prevent such cases, update the pending reset flags with the new
requests flags before the requests are dropped.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When a H/W event is received while a user is registered to events, no
immediate hard reset will happen, and instead the user will be notified
and will have some time to handle it and eventually release the
device, after which the reset will be done.
If a user, as part of the handling and as part of the cleanup steps
towards releasing the device, unregisters from receiving those events,
and at that time an adjacent H/W event is received, it will be assumed
that the user is not registered to events and thus an immediate hard
reset is required.
To prevent such an unwanted immediate reset, modify the driver to
perform it if the user is not registered to events AND we don't already
have a pending reset for a previous H/W event.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ivpu_job.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: llvm@lists.linux.dev
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://lore.kernel.org/r/20230922175416.work.272-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
drm-misc-next for v6.7-rc1:
UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
opened by the display server for a client, the correct owner is
displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
recycling.
Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.
Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.
Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
especially related to how the modeset sequence works and
the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
Create buffers with cache coherency on the CPU side (write-back) while
disabling snooping on the VPU side. These buffers require an explicit
cache flush after each CPU-side modification.
Configuring pages as write-combined may introduce significant delays,
potentially taking hundreds of milliseconds for 64 MB buffers.
Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the
VPU side. Allocate FW runtime memory buffer (64 MB) as cached with
snooping-disabled.
This fixes random long FW loading times and boot params memory
corruption on warmboot (due to missed wmb).
Fixes: 02d5b0aacd ("accel/ivpu: Implement firmware parsing and booting")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926120943.GD846747@linux.intel.com
Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.
Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.
Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com
Do not enable frequency change interrupt on 40xx as it might
lead to an interrupt storm in current design.
FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause
KMD to check VPU interrupt sources by reading VPUIP registers.
Access to those registers will toggle necessary clocks and trigger
another FREQ_CHANGE interrupt possibly ending in an infinite loop.
FREQ_CHANGE interrupt has only debug purposes and can be permanently
disabled.
Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set
after configuring the workpoint. This step ensures that the VPU
microcontroller clock is actively toggling and ready for operation.
Previously, we relied solely on the READY bit in the VPU_STATUS
register, which indicated the completion of the workpoint download.
However, this approach was insufficient, as the READY bit could be set
while the device was still running on a sideband clock until the PLL
locked. To guarantee that the PLL is locked and the device is running on
the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before
proceeding with the remainder of the power-up sequence.
Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute
the dmesg.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-3-stanislaw.gruszka@linux.intel.com
If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:
[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0
To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com
Once a BO is attached with slicing configuration that BO can only be used
for that particular setting. With this new feature user can detach slicing
configuration off an already sliced BO and attach new slicing configuration
using QAIC_ATTACH_SLICE_BO.
This will support BO recycling.
detach_slice_bo() detaches slicing configuration from a BO. This new
helper function can also be used in release_dbc() as we are doing the
exact same thing.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
[jhugo: add documentation for new ioctl]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-8-quic_jhugo@quicinc.com
This makes sure that we have a single place to initialize and
re-initialize BO.
Use this new API to cleanup release_dbc()
We will need this for next patch to detach slicing to a BO.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-7-quic_jhugo@quicinc.com
Variables that are set while adding the corresponding BO in transfer list
should be cleaned when flushing them out of transfer list prematurely.
After this patch we do not need some of the cleanup done in release_dbc()
This patch would also pave the way to have a central location to clean BO,
during an undesired situation.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-6-quic_jhugo@quicinc.com
qaic_attach_slicing_bo() updates slicing config on BO. Use the existing
function qaic_free_slices_bo() to remove slicing config done in
qaic_attach_slicing_bo().
Use qaic_free_slices_bo() to cleanup release_dbc()
This would be helpful when we introduce a new IOCTL to detach slicing
configuration onto a BO.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-5-quic_jhugo@quicinc.com
Once the BO is declared 'sliced' by setting bo->sliced to true we can
perform DMA (QAIC_EXECUTE_BO) operation on that BO. Hence we should
declare a BO sliced after completing all the operations.
Adding BO to its respective DBC list in qaic_attach_slicing_bo() seems
out of place as qaic_attach_slicing_bo() should just update BO with
slicing configuration.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-4-quic_jhugo@quicinc.com
Update/Clean up BO metadata in a central location, this will help maintain
the code and looks cleaner.
Use qaic_unprepare_bo() to cleanup release_dbc()
Next few patches will be implementing detach IOCTL which will leverage
this patch.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-3-quic_jhugo@quicinc.com
->size field in struct qaic_bo stores user requested buffer size for
allocate path or size of the dmabuf(PRIME). Now for allocate path driver
allocates a BO of size which is PAGE_SIZE aligned, this size is already
stored in base BO structure (struct drm_gem_object).
So difference is ->size of struct qaic_bo stores the raw value coming from
user and ->size in struct drm_gem_object stores the PAGE_SZIE aligned size.
Do not use ->size from struct qaic_bo for any validation or operation
instead use ->size from struct drm_gem_object since we already have
allocated that much memory then why not use it. Only validate if user
is trying to use more then the BO size. This make the driver more flexible.
After this change ->size field of struct qaic_bo becomes redundant. Remove
it.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-2-quic_jhugo@quicinc.com
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
Buttress spec requires that the interrupt status is cleared at
the source first (before clearing MTL_BUTTRESS_INTERRUPT_STAT),
that implies that we have to mask out the global interrupt while
handling buttress interrupts.
Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822095238.3722815-1-stanislaw.gruszka@linux.intel.com
Since drm_dev_alloc() is deprecated it is recommended to use
devm_drm_dev_alloc() instead. Update the driver to start using
devm_drm_dev_alloc().
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901161236.8371-1-quic_jhugo@quicinc.com
As qaic drivers base device is connected to host via PCI framework, it
makes sense to register in PCI framework at the beginning of module
init.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901161037.6124-1-quic_jhugo@quicinc.com
MMU registers are not platform specific so they should be defined
separate to platform regs.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-12-stanislaw.gruszka@linux.intel.com
Context with SSID = 1 is reserved and accesses on that context happen
only when context is uninitialized on the VPU side. Such access triggers
MMU fault (0xa) "Invalid CD Fetch", which doesn't contain any useful
information besides context ID.
This commit will change that state, now (0x10) "Translation fault" will
be triggered and accessed address will shown in the log.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-7-stanislaw.gruszka@linux.intel.com
Identify the mmu context that failed to initialize in the error messages.
This allows the error to be correlated with a specific user during debug.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-5-stanislaw.gruszka@linux.intel.com
Reduce the number of error messages per single failure in
ivpu_dev_init() and ivpu_probe().
Most error messages are already printed by functions called
from ivpu_dev_init(). Add missed error prints in ivpu_ipc_init()
and ivpu_mmu_context_init().
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-3-stanislaw.gruszka@linux.intel.com
Configure autosuspend values per HW generation and per platform.
For non silicon platforms disable autosuspend for now, for silicon
reduce it to 10 ms.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-2-stanislaw.gruszka@linux.intel.com
Use managed memory allocation for this. That allows us to not keep
track of all the files any more.
v2: keep drm_debugfs_cleanup(), but rename to drm_debugfs_unregister(),
we still need to cleanup the symlink
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-6-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Instead of the per minor directories only create a single debugfs
directory for the whole device directly when the device is initialized.
For DRM devices each minor gets a symlink to the per device directory
for now until we can be sure that this isn't useful any more in any way.
Accel devices create only the per device directory and also drops the mid
layer callback to create driver specific files.
v2: cleanup accel component as well
v3: fix typo when debugfs is disabled
v4: call drm_debugfs_dev_fini() during release as well,
some kerneldoc typos fixed
v5: rebased and one more kerneldoc fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-4-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
We want to remove per minor debugfs directories. Start by stopping
drivers from adding anything inside of those in the mid layer callback.
v2: drop it for the accel node as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-2-christian.koenig@amd.com
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
Also remove extraneous if-statement as it can never be entered. The
return value from `strncpy` is it's first argument. In this case,
`...dyndbg_cmd` is an array:
| char dyndbg_cmd[VPU_DYNDBG_CMD_MAX_LEN];
^^^^^^^^^^
This can never be NULL which means `strncpy`'s return value cannot be
NULL here. Just use `strscpy` which is more robust and results in
simpler and less ambiguous code.
Moreover, remove needless `... - 1` as `strscpy`'s implementation
ensures NUL-termination and we do not need to carefully dance around
ending boundaries with a "- 1" anymore.
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230824-strncpy-drivers-accel-ivpu-ivpu_jsm_msg-c-v1-1-12d9b52d2dff@google.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmTiDvweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7doH/2Poj73npPKPVfT3
RF8AsgvAj2pLby67rdvwTdFX+exS63SsuwtGGRfAHfGabiwmNN+oT2dLb0aY15bp
nskHnFpcqQ/pfZ2i2rUCenzBX8S9QULvPidLKRaf1FcSdOzqd97Bw5oDPMtzqy/R
Pm+Dzs//7fYvtm69nt6hKW4d6wXxNcg7Fk/QgoJ5Ax9vGvDuZmWXH0ZgBf/5kH04
TTPQNtVX57lf+FHugkhFEn4JbYXvN168b+LuX2PHwOeG/8AIS69Hc0vgvhHNAycT
mmpUI1gWA2jfrJ2RCyyezF/6wy9Ocsp+CbPjfwjuRUxOk0XIm1+cp9Mlz/cRbMsZ
f0tOTpk=
=xrJp
-----END PGP SIGNATURE-----
BackMerge tag 'v6.5-rc7' into drm-next
Linux 6.5-rc7
This is needed for the CI stuff and the msm pull has fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZN4izwAKCRDj7w1vZxhR
xRxGAP4h+R+qhB1X4SVmCB8DEY109lcHJofNK/z7aW8EG8X4sQEAlb1cOZRtmRjS
9/Wdmc7377soNHNlMNhxEg8kEeqxGwE=
=c6Zn
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3olqt33em5uhxzjbqghwcwnvmw73h7bxkbdxookmnkecymd4vc@7ogm6gewpprq
The encode_dma() function has some validation on in_trans->size but it
would be more clear to move those checks to find_and_map_user_pages().
The encode_dma() had two checks:
if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size)
return -EINVAL;
The in_trans->addr variable is the starting address. The in_trans->size
variable is the total size of the transfer. The transfer can occur in
parts and the resources->xferred_dma_size tracks how many bytes we have
already transferred.
This patch introduces a new variable "remaining" which represents the
amount we want to transfer (in_trans->size) minus the amount we have
already transferred (resources->xferred_dma_size).
I have modified the check for if in_trans->size is zero to instead check
if in_trans->size is less than resources->xferred_dma_size. If we have
already transferred more bytes than in_trans->size then there are negative
bytes remaining which doesn't make sense. If there are zero bytes
remaining to be copied, just return success.
The check in encode_dma() checked that "addr + size" could not overflow
and barring a driver bug that should work, but it's easier to check if
we do this in parts. First check that "in_trans->addr +
resources->xferred_dma_size" is safe. Then check that "xfer_start_addr +
remaining" is safe.
My final concern was that we are dealing with u64 values but on 32bit
systems the kmalloc() function will truncate the sizes to 32 bits. So
I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);"
and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit
systems.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24d3348b-25ac-4c1b-b171-9dae7c43e4e0@moroto.mountain
The temporary buffer storing slicing configuration data from user is only
freed on error. This is a memory leak. Free the buffer unconditionally.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802145937.14827-1-quic_jhugo@quicinc.com
to reduce the log level of rockchip, a power state fix for the it6505
bridge, a timing fix for the lt9611 bridge, a cache maintenance fix for
ivpu and one to reset vma->vm_ops on mmap for shmem-helper.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZNSJGAAKCRDj7w1vZxhR
xRFgAQDA3tLyItU/xoh1RcwBXS4YjqA6357uh1/atYg65juGogEArrrUWQtDArZj
3AgmsDfwyUC/LOmPpnQ8+ePRw5WUjwE=
=Yoaj
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-08-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes for nouveau around memory safety and DisplayPort, one fix
to reduce the log level of rockchip, a power state fix for the it6505
bridge, a timing fix for the lt9611 bridge, a cache maintenance fix for
ivpu and one to reset vma->vm_ops on mmap for shmem-helper.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fwed6gzdtkse5ocrgd37elhyw7qirfptsvfp5mqqverdzifhxj@4da3vesxcqp2
Add support VPU 4 - new generation of VPU IP with various
hardware design improvements. From driver point of view, it differs
in register set, initialization process and MMU memory ranges.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-7-stanislaw.gruszka@linux.intel.com
Add new dma range and change naming convention for virtual address
memory ranges managed by KMD.
New available ranges are named as follows:
* global range - global context accessible by FW
* aliased range - user context accessible by FW
* dma range - user context accessible by DMA
* shave range - user context accessible by shaves
* global shave range - global context accessible by shave nn
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-6-stanislaw.gruszka@linux.intel.com
Add DRM_IVPU_PARAM_CAPABILITIES parameters to get_param ioctl to query
driver capabilities. For now use it for identify metric streamer and
new dma memory range features. Currently upstream version of intel_vpu
does not have those, they will be added it the future.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-5-stanislaw.gruszka@linux.intel.com
Use VPU IP generation for naming FW instead of the platform name.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-4-stanislaw.gruszka@linux.intel.com
Given that VPU generation can be used by multiple platforms, driver should
use VPU IP generation names instead of a platform.
Change naming for functions and registries.
Use 37XX format, where:
3 - major VPU IP generation version
7 - minor VPU IP generation version
XX - postfix indicating this is an architecture and not marketing name
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-3-stanislaw.gruszka@linux.intel.com
Given that VPU generation can be used by multiple platforms, driver should
use VPU IP generation in names instead of a platform.
Change naming for sources files.
Use 37XX format, where:
3 - major VPU IP generation version
7 - minor VPU IP generation version
XX - postfix indicating this is an architecture and not marketing name
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-2-stanislaw.gruszka@linux.intel.com
Buffers mapped with pgprot_writecombined() are not correctly
flushed. This triggers issues on VPU access using random
memory content such as MMU translation faults, invalid context
descriptors being fetched and can lead to VPU FW crashes.
Fixes: 647371a660 ("accel/ivpu: Add GEM buffer object management")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802063735.3005291-1-stanislaw.gruszka@linux.intel.com
Pointer pexec is being assigned a value however it is never read. The
assignment is redundant and can be removed. Replace sizeof(*pexec)
with sizeof the type and remove the declaration of pointer pexec.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726140626.264952-1-colin.i.king@gmail.com
accel/qaic, another leak fix in dma-buf and three nouveau fixes around
hotplugging.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZLjo/gAKCRDj7w1vZxhR
xTWbAP99XcDE5j72H1R85umRYU45LRKn/0NOFA4V4wRlBGRSbwD+N2aiRpyP45cu
J5LjdHgSK1DCDjcFxeYqfsU/7jHY8w8=
=jtaK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-07-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Memory leak fixes in drm/client, memory access/leak fixes for
accel/qaic, another leak fix in dma-buf and three nouveau fixes around
hotplugging.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fmj5nok7zggux2lcpdtls2iknweba54wfc6o4zxq6i6s3dgi2r@7z3eawwhyhen
Two functions got added with normal prototypes for debugfs, but not
alternative when building without it:
drivers/accel/habanalabs/common/device.c: In function 'hl_device_init':
drivers/accel/habanalabs/common/device.c:2177:14: error: implicit declaration of function 'hl_debugfs_device_init'; did you mean 'hl_debugfs_init'? [-Werror=implicit-function-declaration]
drivers/accel/habanalabs/common/device.c:2305:9: error: implicit declaration of function 'hl_debugfs_device_fini'; did you mean 'hl_debugfs_remove_file'? [-Werror=implicit-function-declaration]
Add stubs for these as well.
Fixes: 3b9abb4fa6 ("accel/habanalabs: expose debugfs files later")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609120636.3969045-1-arnd@kernel.org
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmSvvRAACgkQaA3BHVML
eiNpGQgAs8jq1XjN9t8jZsdgXnoCbkZyVUI2NO0HwoVwpRCLgbXp5AX5qq2oRciE
TBhe4Fceh/ZsYqHTZQahnguxgRKM5JgXwbI4Z0iiOVcqasNbycaKAqipxJJ7kdo1
qPhGCbgQFVX7oIq2xjfXehh6O0SYX+R9r88X8dMJxMYv/pcLwOHG74kS040WOcQq
uATgcnobOf/D8ZmlqvfKGAeTUoFo/RSR2Uhlauka58qgeUbicrTELZT2barY9d+k
as6U5vv4wx2zMklTkjrlkMpAT1ZpbB9d3jGHwL27VEnjlfd3wV2bdH7Dzn9qZRf/
gn0ALg/b3u5yBWk/k7YBvijXyNcH6Q==
=bBuG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
If get_user_pages_fast() allocates some pages but not as many as we
wanted, then the current code leaks those pages. Call put_page() on
the pages before returning.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q+ZuONTsBG+1T@moroto
The encode_dma() function has integer overflow checks. The
encode_passthrough(), encode_activate() and encode_status() functions
did not. I added integer overflow checking everywhere. I also
updated the integer overflow checking in encode_dma() to use size_add()
so everything is consistent.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
[jhugo: tweak if in encode_dma() to match existing style]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q7IsPkj6WSCcL@moroto
Copy the bounds checking from encode_message() to decode_message().
This patch addresses the following concerns. Ensure that there is
enough space for at least one header so that we don't have a negative
size later.
if (msg_hdr_len < sizeof(*trans_hdr))
Ensure that we have enough space to read the next header from the
msg->data.
if (msg_len > msg_hdr_len - sizeof(*trans_hdr))
return -EINVAL;
Check that the trans_hdr->len is not below the minimum size:
if (hdr_len < sizeof(*trans_hdr))
This minimum check ensures that we don't corrupt memory in
decode_passthrough() when we do.
memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr));
And finally, use size_add() to prevent an integer overflow:
if (size_add(msg_len, hdr_len) > msg_hdr_len)
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q5nbLyDO7kJa+@moroto
There are several issues in this code. The check at the start of the
loop:
if (user_len >= user_msg->len) {
This check does not ensure that we have enough space for the trans_hdr
(8 bytes). Instead the check needs to be:
if (user_len > user_msg->len - sizeof(*trans_hdr)) {
That subtraction is done as an unsigned long we want to avoid
negatives. Add a lower bound to the start of the function.
if (user_msg->len < sizeof(*trans_hdr))
There is a second integer underflow which can happen if
trans_hdr->len is zero inside the encode_passthrough() function.
memcpy(out_trans->data, in_trans->data, in_trans->hdr.len - sizeof(in_trans->hdr));
Instead of adding a check to encode_passthrough() it's better to check
in this central place. Add that check:
if (trans_hdr->len < sizeof(trans_hdr)
The final concern is that the "user_len + trans_hdr->len" might have an
integer overflow bug. Use size_add() to prevent that.
- if (user_len + trans_hdr->len > user_msg->len) {
+ if (size_add(user_len, trans_hdr->len) > user_msg->len) {
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9a0cb0c1-a974-4f10-bc8d-94437983639a@moroto.mountain
Add information about currently used firmware, makes test
automation of different firmware images easier.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524074847.866711-6-stanislaw.gruszka@linux.intel.com
Firmware file name and version are very important for debugging
customer issues - print them as INFO level message instead
of DEBUG message that is turned off by default.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524074847.866711-5-stanislaw.gruszka@linux.intel.com
MTL C0 stepping fixed issue related to butrress interrupt status clearing,
to clear an interrupt status it is required to write 1 to specific
status bit field. This allows to execute read, modify and write routine.
Writing 0 will not clear the interrupt and will cause interrupt storm.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230703080725.2065635-2-stanislaw.gruszka@linux.intel.com
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----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=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.
v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de
smatch warning:
drivers/accel/qaic/qaic_data.c:620 qaic_free_object() error:
dereferencing freed memory 'obj->import_attach'
obj->import_attach is detached and freed using dma_buf_detach().
But used after free to decrease the dmabuf ref count using
dma_buf_put().
drm_prime_gem_destroy() handles this issue and performs the proper clean
up instead of open coding it in the driver.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Reported-by: Sukrut Bellary <sukrut.bellary@linux.com>
Closes: https://lore.kernel.org/all/20230610021200.377452-1-sukrut.bellary@linux.com/
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230614161528.11710-1-quic_jhugo@quicinc.com
Backmerging into drm-misc-next to get commit 2c1c7ba457
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702 ("drm: Remove struct drm_driver.gem_prime_mmap").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
All drivers initialize this field with drm_gem_prime_mmap(). Call
the function directly and remove the field. Simplifies the code and
resolves a long-standing TODO item.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-3-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSPcdMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWrQH/3KmuvZsWMC4PpJY
VcF9VfF9i+Zv7DoG8sjD5VpNh47e87RsR6WNOFnKol5SUrM6vsBAb5i2rfQahNIv
NSj0fPCE4/Nj9LMecKVC9WD8CitxYdbR+CF9Is21AQj1VihUl9eHXGcAWxuaMyhk
TjPUwmbOOsRVMXXdGJzjX78cvLsxqpSv8A/5OTh16IBimbh7p+YjKJFkbfj/PMWf
aF1quFkIEXgzJcHCpP6KDZHr2KbpY+jIN9hUENnGKJxHYNso5u+KrIW1kAm8meP1
x26ETSquM0T70OAzovOWg+BeVkLDac/3Rh30ztLAI4AtajrlSzycvFsU9UNEJCc2
BnM2IZI=
=ANT5
-----END PGP SIGNATURE-----
Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
If qaic_destroy_drm_device() is called before the device has fully
initialized it will cause a NULL pointer dereference as the drm device
has not yet been created. Fix this with a NULL check.
Fixes: c501ca23a6 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602210440.8411-3-quic_jhugo@quicinc.com
After user handle is allocated, if mutex is interrupted, we do not free
the user handle and return an error. Kref had been initialized, but not
added to users list, so device teardown would also not call free_usr.
Fixes: c501ca23a6 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602210440.8411-2-quic_jhugo@quicinc.com
Moved error info reset code to single function for future use from
other places in the driver.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to increase reliability of the event queue interface,
we apply to Gaudi2 the same mechanism we have in Gaudi1.
The extra validation is basically checking that the received
event index matches the expected index.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to utilize Engine Barrier padding, user must have access to
this register set.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We don't want to allow users to spam the kernel log and sending
ioctls with bad opcodes is a sure way to do it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
addr_dec info should always be fetched, regardless of cause value.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There were a few places where simulator only code got into the upstream.
Remove those places that can confuse other developers.
Fixes: 2a0a839b6a ("habanalabs: extend fatal messages to contain PCI info")
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When receiving page fault from hmmu, the captured address is scrambled
both by HW and by driver. The driver part is unscrambled but the HW
part isn't getting unscrambled.
To avoid declaring wrong address, the HW scrambled part will be
masked.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Any FW component we load must be followed by a corresponding state
update. However, it seems that so far we skipped doing so for the
bootfit case, so fix that.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
By default, the upper QMANs are not used, and instead engines ARCs
access the lower QMANs directly.
Errors for upper QMANs are therefore not expected, and the debug print
of the PQ entries is not needed.
Modify the QMAN debug data print on errors to include only information
for the lower QMAN.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The QMAN GLBL_ERR_STS_4 register has indications for errors also in the
lower CQ and the ARC CQ, and not just for errors in the lower CP.
Modify the relevant define/struct and the related print to use "lower
QM" instead of "lower CP".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When receiving sei interrupt from tpc or decoder, we need to check
the binning mask because if the engine is binned, the razwi info
won't be in the router of the binned engine, instead will be in the
router of the substitute engine.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As mmu disable mode is only used for bring-up stages, let's remove this
option and all code related to it.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Initially, the driver used to read the error cause data directly from
the ASIC. However, the FW now clears it before the driver could read
it. Therefore we should use the error cause data that is extracted by
the FW.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If a workload got stuck, we print an error to the kernel log about it.
Add to that print the configured max timeout value, as that value is
not fixed between ASICs and in addition it can be configured using
a kernel module parameter.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Update the firmware common interface files with the latest version.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
This commit fixes a memory leak caused when clearing the user_mappings
info when a new context is opened immediately after user_mapping is
captured and a hard reset is performed.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Get latest f/w gaudi2 interface file which marks unused
bist_need_iatu_config bit in cold_rst_data structure as reserved bit.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Make the argument names specify the registers array represent
registers that should be unsecured so the user can access them.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The gaudi2_get_tpc_idle_status() function returned the incorrect variable
so it always returned true.
Fixes: d85f0531b9 ("accel/habanalabs: break is_idle function into per-engine sub-routines")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Make the description of @regs_range_array and @regs_range_array_size
to @user_regs_range_array and @user_regs_range_array_size to silence
the warnings:
drivers/accel/habanalabs/common/security.c:506: warning: Function parameter or member 'user_regs_range_array' not described in 'hl_init_pb_ranges_single_dcore'
drivers/accel/habanalabs/common/security.c:506: warning: Function parameter or member 'user_regs_range_array_size' not described in 'hl_init_pb_ranges_single_dcore'
drivers/accel/habanalabs/common/security.c:506: warning: Excess function parameter 'regs_range_array' description in 'hl_init_pb_ranges_single_dcore'
drivers/accel/habanalabs/common/security.c:506: warning: Excess function parameter 'regs_range_array_size' description in 'hl_init_pb_ranges_single_dcore'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=4940
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to missing indication of address decode source (LBW/HBW bus),
we should always try and fetch extended information.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use a straight forward approach to get a conditional result.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently, we rely on COMMS protocol's ack to verify that WFE command
has been acknowledged by the FW. However, this does not guarantee that
the device status has been updated.
Although unlikely, this could trigger a race since the driver expects
the device to be halted at that stage, but it might not be.
Therefore, we increase WFE's robustness by polling on the status
register that will be updated once the device is actually halted.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the debugfs root folder and files for a device are created at
an early step, before the device initialization and before the char
device and sysfs files are exposed to user.
As there is no real reason not to do it together with the device
creation, postpone it to be done right afterwards.
The initialization of the debugfs entry structure is left in its
current position because it is used before creating the files.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently upon a heartbeat failure, we don't know if the failure
is due to firmware hang or due to a bad PCI link. Hence, we
are reading a PCI config space register with a known value (vendor ID)
so we will know which of the two possibilities caused the heartbeat
failure.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For some reason the last possible tpc interrupt cause in
gaudi2_tpc_interrupts_cause is missing from the code.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Aborting CS completions should be in command_submission.c but aborting
waiting for user interrupts should be in device.c.
This separation is also for adding more abort operations in the future.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Sync Stream Encapsulated Signal Handlers can be managed from different
contexts, and as such they are protected via a spin_lock.
However, spin_lock was unnecessarily protecting a larger code section
than really needed, covering a sleepable code section as well.
Since spin_lock disables preemption, it could lead to sleeping in
atomic context.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Wait for AON bit in HOST_SS_CPR_RST_CLR to return 0 before
starting VPUIP power up sequence, otherwise the VPU device
may sporadically fail to boot.
An error in power up sequence is propagated to the runtime
power management - the device will be in an error state
until the VPU driver is reloaded.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607094502.388489-1-stanislaw.gruszka@linux.intel.com
If we get signal when waiting for the mmu->lock we do not invalidate
current MMU configuration that might result in undefined behavior.
Additionally there is little or no benefit on break waiting for
ipc->lock. In current code base, we keep this lock for short periods.
Fixes: 263b2ba5fc ("accel/ivpu: Add Intel VPU MMU support")
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-2-stanislaw.gruszka@linux.intel.com
Turning off the PLL and entering D0i3 will reset the VPU so
an explicit IP reset is redundant.
But if the VPU is active, it may interfere with PLL disabling
and to avoid that, we have to issue an additional IP reset
to silence the VPU before turning off the PLL.
Fixes: a8fed6d1e0 ("accel/ivpu: Fix power down sequence")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-1-stanislaw.gruszka@linux.intel.com
Whenever KMD maps region larger than 64kB that is both aligned and
contiguous, set contiguous bit (52) in MMU PTE descriptor for each page
in that region.
This allows to treat 16 contiguous pages as one and reduce
number of MMU page walks required which results in lower latency.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518131605.650622-6-stanislaw.gruszka@linux.intel.com
Simplify and unify naming convention in MMU600 page tables
configuration.
All DMA addresses in page tables directly accessed by VPU are called
with _dma sufix and all CPU pointers to those page tables have _ptr
sufix.
Base pointers used to do a page walk on the CPU have corresponding
names:
pud_ptrs (pointers used to get access to PUD DMA)
pmd_ptrs (pointers used to get access to PMD DMA)
pte_ptrs (pointers used to get access to PTE DMA)
with the following convention:
u64 *pud_dma_ptr = pud_ptrs[pgd_idx];
*pud_dma_ptr = pud_dma;
u64 *pmd_dma_ptr = pmd_ptrs[pgd_idx][pud_idx];
*pmd_dma_ptr = pmd_dma;
u64 *pte_dma_ptr = pte_ptrs[pgd_idx][pud_idx][pmd_idx];
*pte_dma_ptr = pte_dma;
On the way change to coherent dma allocation, _wc is only valid on ARM
and was used by mistake.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518131605.650622-5-stanislaw.gruszka@linux.intel.com
Future devices will have different dma bit mask, make it hw specific.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518131605.650622-4-stanislaw.gruszka@linux.intel.com
Program additional fourth level required for mappings with VA above 38bits.
Co-developed-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518131605.650622-3-stanislaw.gruszka@linux.intel.com
MTL HW only uses StreamId0 and StreamId3 that map to TBU0 and TBU2.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518131605.650622-2-stanislaw.gruszka@linux.intel.com
Use DMA_RESV_USAGE_BOOKKEEP reservation for buffer objects, except for
command buffers for which we use DMA_RESV_USAGE_WRITE (since VPU can
write to command buffer context save area).
Fixes: 0ec8671837 ("accel/ivpu: Fix S3 system suspend when not idle")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413063810.3167511-1-stanislaw.gruszka@linux.intel.com
Drivers that use the gen_pool*() family of functions should
select GENERIC_ALLOCATOR to prevent build errors like these:
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_free':
include/linux/genalloc.h:172: undefined reference to `gen_pool_free_owner'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_alloc_algo':
include/linux/genalloc.h:138: undefined reference to `gen_pool_alloc_algo_owner'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_free':
include/linux/genalloc.h:172: undefined reference to `gen_pool_free_owner'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `ivpu_ipc_init':
drivers/accel/ivpu/ivpu_ipc.c:441: undefined reference to `devm_gen_pool_create'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_add_virt':
include/linux/genalloc.h:104: undefined reference to `gen_pool_add_owner'
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202305221206.1TaugDKP-lkp@intel.com/
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Cc: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526044519.13441-1-rdunlap@infradead.org
This commit modifies the call to retrieve HW or FW error events to
return success when no events are pending, as done in the calls to
other events.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User needs to be able to perform downcast / upcast of fp8_143 dtype.
Hence bias register needs to be accessed by the user.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is done depending on the FW version. The cpucp method is
preferable and saves scratchpads resource.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The fw inner version is less trustable, instead use the fw general
sw release version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is not always possible to know the FW's SW version from the inner FW
version. Therefore we should extract the general SW version in addition
to the FW version and use it in functions like
'hl_is_fw_ver_below_1_9' etc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We later want to add fields for Firmware SW version. The current
extracted FW version is the inner FW versioning so the new name
is better and also better differentiate from the FW's SW version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
the helper is extract_u32_until_given_char and can later be used to
also get the major/minor of the sw version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit fixes a bug in Gaudi2 when freeing the scratchpad memory
in case software init fails.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once it was decided that these security settings are to be done by FW
rather than by the driver, there's no reason to keep them in the code.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
EDMA transpose workload requires to signal for every activation.
User FW sends all the dummy signals to RD_LBW_RATE_LIM_CFG, to save
lbw bandwidth. We need the user to be able to access that register to
configure it.
Signed-off-by: Rakesh Ughreja <rughreja@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In Gaudi2 asic, PSOC RAZWI may cause in HBW or LBW. The address that
caused the error is read from HW register and printed by the Driver.
There are cases where the Driver receives an indication on PSOC
RAZWI error but the address value is zero. In that case, the indication
is a false positive.
The Driver should not "count" a PSOC RAZWI event error when the
caused the address is zeroed.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
gcc with W=1 reports
drivers/accel/habanalabs/gaudi/gaudi.c:117:19: error:
‘gaudi_irq_name’ defined but not used [-Werror=unused-const-variable=]
117 | static const char gaudi_irq_name[GAUDI_MSI_ENTRIES][GAUDI_MAX_STRING_LEN] = {
| ^~~~~~~~~~~~~~
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If msg_xfer() is unable to queue part of a NNC message because the MHI ring
is full, it will attempt to give the QSM some time to drain the queue.
However, if QSM fails to make any room, msg_xfer() will fail and tell the
caller to try again. This is problematic because part of the message may
have been committed to the ring and there is no mechanism to revoke that
content. This will cause QSM to receive a corrupt message.
The better way to do this is to check if the ring has enough space for the
entire message before committing any of the message. Since msg_xfer() is
under the cntl_mutex no one else can come in and consume the space.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-6-quic_jhugo@quicinc.com
During QAIC_ATTACH_SLICE_BO, we associate a BO to its DBC. We need to
grab the dbc->ch_lock to make sure that DBC does not goes away while
QAIC_ATTACH_SLICE_BO is still running.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-5-quic_jhugo@quicinc.com
Before calling synchronize_srcu() we clear the transfer list, this is to
allow all the QAIC_WAIT_BO callers to exit otherwise the system could
deadlock. There could be a corner case where more elements get added to
transfer list after we have flushed it. Re-flush the transfer list once
all the holders of dbc->ch_lock have completed execution i.e.
synchronize_srcu() is complete.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-4-quic_jhugo@quicinc.com
QAIC_ATTACH_SLICE_BO attaches slicing configuration to a BO. Validate if
given BO is already sliced. An already sliced BO cannot be sliced again.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-3-quic_jhugo@quicinc.com
Validating user data does not need to be protected by any lock and it is
safe to move it out of critical region.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-2-quic_jhugo@quicinc.com
clang static analysis reports
drivers/accel/qaic/qaic_data.c:610:2: warning: Undefined or garbage
value returned to caller [core.uninitialized.UndefReturn]
return ret;
^~~~~~~~~~
From a code analysis of the function, the ret variable is only set some
of the time but is always returned. This suggests ret can return
uninitialized garbage. However BO allocation will ensure ret is always
set in reality.
Initialize ret to 0 to silence the warning.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Tom Rix <trix@redhat.com>
[jhugo: Reword commit text]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517165605.16770-1-quic_jhugo@quicinc.com
Smatch complains that these are not initialized if get_cntl_version()
fails but we still print them in the debug message. Not the end of
the world, but true enough. Let's just initialize them to a dummy value
to make the checker happy.
Fixes: c501ca23a6 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
[jhugo: Add fixes and reorder varable declarations for style]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d11ee378-7b06-4b5e-b56f-d66174be1ab3@kili.mountain
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
ttm:
- Fix TTM build on archs where PMD_SHIFT is not constant.
qaic:
- Revert uAPI from accel/qaic.
panel:
- Improve error handling in nt35950.
- Fix double unregister in otm8009a when removing the driver.
-----BEGIN PGP SIGNATURE-----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=/auu
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A bit out of routine fixes pull for rc1.
There's a build breakage on some platforms due to ttm, this has that
fix + qaic uapi removal + minor panel fixes.
ttm:
- Fix TTM build on archs where PMD_SHIFT is not constant
qaic:
- Revert uAPI from accel/qaic
panel:
- Improve error handling in nt35950
- Fix double unregister in otm8009a when removing the driver"
* tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm:
drm/panel: novatek-nt35950: Only unregister DSI1 if it exists
drm/panel: otm8009a: Set backlight parent to panel device
drm/panel: novatek-nt35950: Improve error handling
drm/ttm: revert "Reduce the number of used allocation orders for TTM pages"
Revert "accel/qaic: Add mhi_qaic_cntl"
- New drivers
- Driver for Acbel FSB032 power supply
- Driver for StarFive JH71x0 temperature sensor
- Added support to existing drivers
- aquacomputer_d5next: Support for Aquacomputer Aquastream XT
- nct6775: Added various ASUS boards to list of boards supporting WMI
- asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator,
- Notable improvements
- Regulator event and sysfs notification support for PMBus drivers
- Notable cleanup:
- Constified pointers to hwmon_channel_info
- Various other minor bug fixes and improvements
-----BEGIN PGP SIGNATURE-----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=i+Fr
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers
- Driver for Acbel FSB032 power supply
- Driver for StarFive JH71x0 temperature sensor
Added support to existing drivers:
- aquacomputer_d5next: Support for Aquacomputer Aquastream XT
- nct6775: Added various ASUS boards to list of boards supporting WMI
- asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator,
Notable improvements:
- Regulator event and sysfs notification support for PMBus drivers
Notable cleanup:
- Constified pointers to hwmon_channel_info
.. and various other minor bug fixes and improvements"
* tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (131 commits)
hwmon: lochnagar: Remove the unneeded include <linux/i2c.h>
hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E
hwmon: (adt7475) Use device_property APIs when configuring polarity
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT
hwmon: (it87) Disable/enable SMBus access for IT8622E chipset
hwmon: (it87) Add calls to smbus_enable/smbus_disable as required
hwmon: (it87) Test for error in it87_update_device
hwmon: (it87) Disable SMBus access for environmental controller registers.
docs: hwmon: Add documentaion for acbel-fsg032 PSU
hwmon: (pmbus/acbel-fsg032) Add Acbel power supply
dt-bindings: trivial-devices: Add acbel,fsg032
dt-bindings: vendor-prefixes: Add prefix for acbel
hwmon: (sfctemp) Simplify error message
hwmon: (pmbus/ibm-cffps) Use default debugfs attributes and lock function
hwmon: (pmbus/core) Add lock and unlock functions
hwmon: (pmbus/core) Request threaded interrupt with IRQF_ONESHOT
hwmon: (nct6775) update ASUS WMI monitoring list A620/B760/W790
hwmon: ina2xx: add optional regulator support
dt-bindings: hwmon: ina2xx: add supply property
dt-bindings: hwmon: pwm-fan: Convert to DT schema
...
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----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=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
This reverts commit 566fc96198.
This exposes a userspace API that is still under debate. Revert the
change before the uAPI gets exposed to avoid making a mistake. QAIC is
otherwise still functional.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1681307864-3782-1-git-send-email-quic_jhugo@quicinc.com
hl_sysfs_fini() is called only if hl_sysfs_init() completes
successfully. Therefore if hl_sysfs_init() fails, need to remove any
sysfs group that was added until that point.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HW queues testing at driver load and after reset takes a substantial
amount of time.
This commit reduces the queues test time in Gaudi2 devices by running
all the tests in parallel instead of one after the other.
Time measurements on tests duration shows that the new method is almost
x100 faster than the serial approach.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is only single eq entry for arc farm sei event which aggregates
events from the four arc farms.
Fix the code to handle this event according to this behavior.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Multi MSI interrupts aren't working in Gaudi1 and because of that,
we are only using a single MSI interrupt. Therefore, let's remove this
dead code in order to avoid confusion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Removing redundant asic prop variable as we don't need to expose this
to common code. In addition, fix some typos.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state).
Once sent, FW's CPU isn't expected to continue communicating with LKD.
Therefore, the stage of waiting for COMMS_STS_OK should be skipped or
else waiting for COMMS_STS_OK will simply timeout, which will trigger
unexpected behavior.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in the Driver or FW. But It also can appear as a result
of events that have been sent from FW just before the hard reset.
In order to avoid receiving events from FW while the device is in reset
and is already in 'disabled' mode, sync the f/w events interrupt right
before setting the device to 'disabled'.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The decoder IRQ status register may have several set bits upon an
abnormal interrupt. Therefore, when setting the events mask, need to
check all bits and not using if-else.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Decoder abnormal interrupts are for errors and not for completion, so
rename the relevant work and work function to not include 'completion'.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are rare cases of failures when cards are initialized due to
wrong values in efuse mappings that are parsed by firmware.
To help debug those cases, print (in debug level) the raw binning masks
as fetched from the firmware during device initialization.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current mapping between HMMU event and HMMU block is wrong.
In addition the captured address in case of a page fault or
an access error is scrambled, Hence we must call the descramble
function.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
1. Rename the func to hl_get_preboot_major_minor because we also set
the extracted values in hdev fields.
2. Free the allocated string in the calling function which makes more
sense
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The register which needs to be cleared is the valid register instead
of the address.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix an issue in hard reset flow in which the driver didn't send a
disable pci message if there was an active compute context.
In hard reset, disable pci message should be sent no matter if
a compute context exists or not.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
The disable pci message is sent in reset device. It informs the FW not
to raise more EQs. The Driver may ignore received EQs, when the device
is in disabled mode.
The duplication happens when hard reset is scheduled during compute
reset and also performs 'escalate_reset_flow'.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
COMMS protocol is used for LKD <--> FW communication, and any
communication failure between the two might turn out to be
destructive, hence, it should be well emphasized.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
since the function might fail and we should propagate the failure.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
When the device is in disabled state, the driver isn't suppose to
receive any events from FW. Printing the event type, as part of the
message that was already printed, shall help to get more info if this
unexpected message is received.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Once a memory mapping is added to the page tables, it's followed by
a TLB invalidation request which could potentially fail (HW failure).
Removing the mapping is simply a part of this failure handling routine.
TLB invalidation failure prints were updated to be more accurate.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Now that we have all the components of a minimum QAIC which can boot and
run an AIC100 device, add the infrastructure that allows the QAIC driver
to be built.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-8-git-send-email-quic_jhugo@quicinc.com
Some of the MHI channels for an AIC100 device need to be routed to
userspace so that userspace can communicate directly with QSM. The MHI
bus does not support this, and while the WWAN subsystem does (for the same
reasons), AIC100 is not a WWAN device. Also, MHI is not something that
other accelerators are expected to share, thus an accel subsystem function
that meets this usecase is unlikely.
Create a QAIC specific MHI userspace shim that exposes these channels.
Start with QAIC_SAHARA which is required to boot AIC100 and is consumed by
the kickstart application as documented in aic100.rst
Each AIC100 instance (currently, up to 16) in a system will create a
chardev for QAIC_SAHARA. This chardev will be found as
/dev/<mhi instance>_QAIC_SAHARA
For example - /dev/mhi0_QAIC_SAHARA
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-7-git-send-email-quic_jhugo@quicinc.com
Add the datapath component that manages BOs and submits them to running
workloads on the qaic device via the dma_bridge hardware. This allows
QAIC clients to interact with their workloads (run inferences) via the
following ioctls along with mmap():
DRM_IOCTL_QAIC_CREATE_BO
DRM_IOCTL_QAIC_MMAP_BO
DRM_IOCTL_QAIC_ATTACH_SLICE_BO
DRM_IOCTL_QAIC_EXECUTE_BO
DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO
DRM_IOCTL_QAIC_WAIT_BO
DRM_IOCTL_QAIC_PERF_STATS_BO
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-6-git-send-email-quic_jhugo@quicinc.com
Add the control path component that talks to the management processor (QSM)
to load workloads onto the AIC100 device. This implements the KMD portion
of the NNC protocol over the QAIC_CONTROL MHI channel and the
DRM_IOCTL_QAIC_MANAGE IOCTL to userspace. With this functionality, QAIC
clients are able to load, run, and cleanup their workloads on the device
but not interact with the workloads (run inferences).
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-5-git-send-email-quic_jhugo@quicinc.com
An AIC100 device contains a MHI interface with a number of different
channels for controlling different aspects of the device. The MHI
controller works with the MHI bus to enable and drive that interface.
AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
expects the MHI bus to manage the process of loading and sending SBL to
the device.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-4-git-send-email-quic_jhugo@quicinc.com
Add the QAIC driver uapi file and core driver file that binds to the PCIe
device. The core driver file also creates the accel device and manages
all the interconnections between the different parts of the driver.
The driver can be built as a module. If so, it will be called "qaic.ko".
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-3-git-send-email-quic_jhugo@quicinc.com
Wait for VPU to be idle in ivpu_pm_suspend_cb() before powering off
the device, so jobs are not lost and TDRs are not triggered after
resume.
Fixes: 852be13f3b ("accel/ivpu: Add PM support")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-3-stanislaw.gruszka@linux.intel.com
Currently job->done_fence is added to every BO handle within a job. If job
handle (command buffer) is shared between multiple submits, KMD will add
the fence in each of them. Then bo_wait_ioctl() executed on command buffer
will exit only when all jobs containing that handle are done.
This creates deadlock scenario for user mode driver in case when job handle
is added as dependency of another job, because bo_wait_ioctl() of first job
will wait until second job finishes, and second job can not finish before
first one.
Having fences added only to job buffer handle allows user space to execute
bo_wait_ioctl() on the job even if it's handle is submitted with other job.
Fixes: cd7272215c ("accel/ivpu: Add command buffer submission logic")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-2-stanislaw.gruszka@linux.intel.com
VPU on MTL has hardware optimizations and does not require 10ms
D0 - D3hot transition delay imposed by PCI specification (PCIe
r6.0, sec 5.9.) .
The delay removal is traditionally done by adding PCI ID to
quirk_remove_d3hot_delay() in drivers/pci/quirks.c . But since
we do not need that optimization before driver probe and we
can better specify in the ivpu driver on what (future) hardware
use the optimization, we do not use quirk_remove_d3hot_delay()
for that.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403121545.2995279-1-stanislaw.gruszka@linux.intel.com
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPC messages transmitted to the device must be marked as
allocated - status field must be set to 1. The VPU driver
has IVPU_IPC_HDR_ALLOCATED incorrectly defined. Future VPU
firmware versions will reject all IPC messages with invalid
status and will not work with a VPU driver that is missing
this fix.
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-9-stanislaw.gruszka@linux.intel.com
The driver calculates the wrong frequency because it ignores
the workpoint config and this cause undesired power/performance
characteristics. Fix this by using the workpoint config in
the freq calculations.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-8-stanislaw.gruszka@linux.intel.com
The support for single tile SKUs was dropped from MTL.
Note that we can still boot the VPU with 1-tile work point
config - this is independent from number of tiles present
in the VPU.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-7-stanislaw.gruszka@linux.intel.com
Use pci_set_power_state() to disable buttress when device is removed.
This is workaround of hardware bug that hangs the system.
Additionally not disabling buttress prevents CPU enter deeper Pkg-C
states when the driver is unloaded or fail to probe.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-6-stanislaw.gruszka@linux.intel.com
Remove FPGA workaround on power_down to skip checking for noc
quiescent state.
Put VPU in reset before powering it down and skip manipulating
registers that are reset by the VPU reset.
This fixes power down errors where VPU is powered down just after VPU
is booted.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-5-stanislaw.gruszka@linux.intel.com
The SSID=1 is used by the firmware as default value in
case SSID mapping is not initialized. This allows
detecting use of miss-configured memory contexts.
The future FW versions may not allow using SSID=1.
SSID=65 is valid value, number of contexts are limited
by number of available command queues, but SSID can be
any u16 value.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-4-stanislaw.gruszka@linux.intel.com
We should not access hardware after we unbind from the bus.
Use drm_dev_enter() / drm_dev_exit() to mark code sections where
hardware is accessed (and not already protected by other locks)
and drm_dev_unplug() to mark device is gone.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-2-stanislaw.gruszka@linux.intel.com
- uAPI changes:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2. This is to allow the user to perform power
testing/measurements when training different topologies.
- Expose in the INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- Expose in the INFO ioctl a bit-mask of the available rotator engines
in Gaudi2. This is to align with other engines that are already exposed.
- Expose in the INFO ioctl the register's address of the f/w that should
be used to trigger interrupts from within the user's code running in the
compute engines.
- Add a critical-event bit in the eventfd bitmask so the user will know the
event that was received was critical, and a reset will now occur
- Expose in the INFO ioctl two new opcodes to fetch information on h/w and
f/w events. The events recorded are the events that were reported in the
eventfd.
- New features and improvements:
- Add a dedicated interrupt ID in MSI-X in the device to the notification of
an unexpected user-related event in Gaudi2. Handle it in the driver by
reporting this event.
- Allow the user to fetch the device memory current usage even when the
device is undergoing compute-reset (a reset type that only clears the
compute engines).
- Enable graceful reset mechanism for compute-reset. This will give the
user a few seconds before the device is reset. For example, the user can,
during that time, perform certain device operations (dump data for debug)
or close the device in an orderly fashion.
- Align the decoder with the rest of the engines in regard to notification
to the user about interrupts and in regard to performing graceful reset
when needed (instead of immediate reset).
- Add support for assert interrupt from the TPC engine.
- Get the reset type that is necessary to perform per event from the
auto-generated irq_map array.
- Print the specific reason why a device is still in use when notifying to
the user about it (after the user closed the device's FD).
- Move to threaded IRQ when handling interrupts of workload completions.
- Firmware related fixes:
- Fix RAZWI event handler to match newest f/w version.
- Read error cause register in dma core events because the f/w doesn't
do that.
- Increase maximum time to wait for completion of Gaudi2 reset due to f/w
bug.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
i.e increment the device file refcount for any dma-buf that was exported
for that device. This will make sure the compute device release function
won't be called until the user closes all the FDs of the relevant
dma-bufs. Without this change, closing the device's FD before/without
closing the dma-buf's FD would always lead to hard-reset of the device.
- Fix a link in the drm documentation to correctly point to the accel section.
- Compilation warnings cleanups
- Misc bug fixes and code cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmQYfcAACgkQZR1NuKta
54DB4Af/SuiHZkVXwr+yHPv9El726rz9ZQD7mQtzNmehWGonwAvz15yqocNMUSbF
JbqE/vrZjvbXrP1Uv5UrlRVdnFHSPV18VnHU4BMS/WOm19SsR6vZ0QOXOoa6/AUb
w+kF3D//DbFI4/mTGfpH5/pzwu51ti8aVktosPFlHIa8iI8CB4/4IV+ivQ8UW4oK
HyDRkIvHdRmER7vGOfhwhsr4zdqSlJBYrv3C3Z1dkSYBPW/5ICbiM1UlKycwdYKI
cajQBSdUQwUCWnI+i8RmSy3kjNO6OE4XRUvTv89F2bQeyK/1rJLG2m2xZR/Ml/o5
7Cgvbn0hWZyeqe7OObYiBlSOBSehCA==
=wclm
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.4:
- uAPI changes:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2. This is to allow the user to perform power
testing/measurements when training different topologies.
- Expose in the INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- Expose in the INFO ioctl a bit-mask of the available rotator engines
in Gaudi2. This is to align with other engines that are already exposed.
- Expose in the INFO ioctl the register's address of the f/w that should
be used to trigger interrupts from within the user's code running in the
compute engines.
- Add a critical-event bit in the eventfd bitmask so the user will know the
event that was received was critical, and a reset will now occur
- Expose in the INFO ioctl two new opcodes to fetch information on h/w and
f/w events. The events recorded are the events that were reported in the
eventfd.
- New features and improvements:
- Add a dedicated interrupt ID in MSI-X in the device to the notification of
an unexpected user-related event in Gaudi2. Handle it in the driver by
reporting this event.
- Allow the user to fetch the device memory current usage even when the
device is undergoing compute-reset (a reset type that only clears the
compute engines).
- Enable graceful reset mechanism for compute-reset. This will give the
user a few seconds before the device is reset. For example, the user can,
during that time, perform certain device operations (dump data for debug)
or close the device in an orderly fashion.
- Align the decoder with the rest of the engines in regard to notification
to the user about interrupts and in regard to performing graceful reset
when needed (instead of immediate reset).
- Add support for assert interrupt from the TPC engine.
- Get the reset type that is necessary to perform per event from the
auto-generated irq_map array.
- Print the specific reason why a device is still in use when notifying to
the user about it (after the user closed the device's FD).
- Move to threaded IRQ when handling interrupts of workload completions.
- Firmware related fixes:
- Fix RAZWI event handler to match newest f/w version.
- Read error cause register in dma core events because the f/w doesn't
do that.
- Increase maximum time to wait for completion of Gaudi2 reset due to f/w
bug.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
i.e increment the device file refcount for any dma-buf that was exported
for that device. This will make sure the compute device release function
won't be called until the user closes all the FDs of the relevant
dma-bufs. Without this change, closing the device's FD before/without
closing the dma-buf's FD would always lead to hard-reset of the device.
- Fix a link in the drm documentation to correctly point to the accel section.
- Compilation warnings cleanups
- Misc bug fixes and code cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmQYfcAACgkQZR1NuKta
# 54DB4Af/SuiHZkVXwr+yHPv9El726rz9ZQD7mQtzNmehWGonwAvz15yqocNMUSbF
# JbqE/vrZjvbXrP1Uv5UrlRVdnFHSPV18VnHU4BMS/WOm19SsR6vZ0QOXOoa6/AUb
# w+kF3D//DbFI4/mTGfpH5/pzwu51ti8aVktosPFlHIa8iI8CB4/4IV+ivQ8UW4oK
# HyDRkIvHdRmER7vGOfhwhsr4zdqSlJBYrv3C3Z1dkSYBPW/5ICbiM1UlKycwdYKI
# cajQBSdUQwUCWnI+i8RmSy3kjNO6OE4XRUvTv89F2bQeyK/1rJLG2m2xZR/Ml/o5
# 7Cgvbn0hWZyeqe7OObYiBlSOBSehCA==
# =wclm
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Mar 2023 01:37:36 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320154026.GA766126@ogabbay-vm-u20.habana-labs.com
As mmu refactor and nic resume are not relevant anymore, remove
their TODO comments.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
FW had one data route for tpc0 and tpc1 when running in secured mode
and a different one when running without secured mode. After fw fixed
this issue, both mode have the same data path.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order for the user to be aware of unexpected events in Gaudi2 that
aren't assigned to a specific engine, we are adding the handling of
this dedicated interrupt.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Replace initialization of "struct cpucp_packet" from "{0} to "{}" to
avoid a "missing braces around initializer" compilation warning.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After getting page fault in gaudi2, we need to clear the valid bit
instead of the address.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
All engine masks are exposed to user, make sure user gets the
correct rotator enabled mask in gaudi2.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some names of events has been modified/added.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We expose this in order for user applications to know how much dram
is reserved for internal use.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Remove all '\n' from strings which are passed as arguments to
gaudi2_print_event(), because the newline character is added internally
in this function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Now that CQ-completion based jobs do not trigger a reset upon failure,
failure of such jobs (e.g., MMU cache invalidation) should be handled
by the caller itself depending on the error code returned to it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Since the err_cause register is unprivileged, we should read it from
the driver instead of using the param that came from the FW.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
- remove reset_sleep_ms arg from functions that don't use it.
- move the call msleep(reset_sleep_ms) from btm poll to gaudi2_hw_fini
as it is called from there already for other flow.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In hw_fini callback, we use either the cpucp packet method or polling a
register. Currently we return error only in the case of cpucp packet
failure. In this patch we also return error if polling timed out.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to a firmware bug we need to increase reset poll timeout
or else we will timeout in secured environments.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Engines idle state can't always be verified between changes of
engine modes (e.g., stall/halt).
For example, if a CS is inflight when altering engine's mode,
idle state will return NOT idle, always.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since
commit f26e58bf6f ("PCI/AER: Enable error reporting when AER is native"),
the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The memory manager IDR is currently destroyed when user releases the
file descriptor.
However, at this point the user context might be still held, and memory
buffers might be still in use.
Later on, calls to release those buffers will fail due to not finding
their handles in the IDR, leading to a memory leak.
To avoid this leak, split the IDR destruction from the memory manager
fini, and postpone it to hpriv_release() when there is no user context
and no buffers are used.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We plan to do soft-reset either by mmio or by using cpucp packet
depending on the FW version. We don't want to check FW version in two
different places for that (execute soft-reset and wait to soft-reset)
so move the waiting to gaudi2_execute_soft_reset. This also makes sense
because the cpucp also does the waiting.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The user might want to stall/resume engines to perform power testing
for various scenarios. Because our current
HL_CS_FLAGS_ENGINE_CORE_COMMAND command only handles the engines' cores,
we need to add another opcode for handling entire engine and not just
its core.
The user supplies an array, where each entry holds the engine's ID and
the command to send to the engine. The size of the array is limited
by the number of engines in the ASIC (only Gaudi2 is currently
supported).
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
compose_device_in_use_info() was added to handle the snprintf() return
value in a single place.
However, the buffer size in print_device_in_use_info() is set such that
it would be enough for the max possible print, so
compose_device_in_use_info() is not really needed.
Moreover, scnprintf() can be used instead of snprintf(), to save the
check if the return value larger than the given size.
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
There are two reasons why mutex is better here:
1. There's a critical section relatively long, where in
certain scenarios (e.g., multiple VM allocations) taking a spinlock
might cause noticeable performance degradation.
2. It will remove the incorrect usage of mutex under
spin_lock (where preemption is disabled).
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We can allow userspace to query the dram usage during soft-reset.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The PDMA/EDMA is_idle routines didn't check the correct CORE register
in order to get the accurate idle state.
Moreover, it's better to make the is_idle routine more robust by adding
additional checks (IS_HALTED) before announcing that the core is idle.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Is appears that the flag -
DCORE0_TPC0_CFG_STATUS_VECTOR_PIPE_EMPTY_MASK, has no actual use when
it comes to querying TPC idleness, since this flag's corresponding bit
turns-off after stalling the engine, and turns back on after resuming
it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case the KDMA fails scrubbing the DCCMs (following a soft-reset
upon device release), the driver will only print failure until reset
flow ends, rather than escalating it into a hard-reset.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add notifications to user in case of decoder abnormal interrupts, and
use the graceful reset mechanism if reset is required.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Since hw_fini return error code for failure indication, we should
check its return value. Currently it might only fail upon soft-reset
from hl_device_reset. Later patch will add hw_fini failure in case of
polling timeout in hard-reset.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
is_idle() was too long, so break it up for readability.
In addition, we can now use the new sub-routines from other places.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Compute driver threads names will start with hlX-*, when X is the
device id.
This will help distinguish them from the NIC thread names.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add a helper function to search the vm hash for a node with a given
virtual address.
As opposed to the current code, this function explicitly returns NULL
when no node is found, instead of basing on the loop cursor object's
value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
'irq_handler' in gaudi2_enable_msix(), is just assigned with a function
name and then used when calling request_threaded_irq().
Remove the variable and use the function name directly as an argument.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
We later use cpucp packet for soft reset which might fail
so we should be able propagate the failure case.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Remove leading zeroes when printing the idle mask to make it clearer.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Make the comments align with the order of the fields in the structure
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
smatch reports
drivers/accel/habanalabs/common/device.c:2619:6: warning:
symbol 'hl_capture_hw_err' was not declared. Should it be static?
drivers/accel/habanalabs/common/device.c:2641:6: warning:
symbol 'hl_capture_fw_err' was not declared. Should it be static?
both are only used in device.c, so they should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Building with clang W=2 has several similar warnings
drivers/accel/habanalabs/common/decoder.c:46:51: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void
dec_error_intr_work(struct hl_device *hdev, u32 base_addr, u32 core_id)
^
drivers/accel/habanalabs/common/security.h:13:26: note: previous declaration is here
extern struct hl_device *hdev;
^
There is no global definition of hdev, so the extern is not needed.
Searched with
grep -r '^struct' . | grep hl_dev
Change to an forward decl to resolve these issues
drivers/accel/habanalabs/common/mmu/../security.h:133:40: error: ‘struct hl_device’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
133 | bool (*skip_block_hook)(struct hl_device *hdev,
| ^~~~~~~~~
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The cpu accessible dma allocations use the gen_pool api which actually
does not allocate new memory from the system but manages memory already
allocated before. When tracing this together with real dma
allocation/free it cause confusing logs like a '0' dma address and
a cpu address appearing twice etc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
in the out_err flow, combine the two cases of soft-reset since
they have mostly common code. In addition unlock reset_info.lock
after touching reset count.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Because this field is only used for debug print,
we can do more precise debug directly instead.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
To match their description above the function
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Align assignment of reset_upon_device_release to the convention used
in this function.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
hl_irq_handler_default() is not used and can be removed.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
"eq_base[eq->ci].hdr.ctl" is used directly in a print without a
le32_to_cpu() conversion.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In addition, we implement the corresponding interrupt
handler that will notify the user upon such an event.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
In order for interrupt timestamp to be more accurate we should
capture it during the interrupt handling rather than in threaded
irq context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
We prefer not to handle the user interrupt job inside the interrupt
context. Instead, use threaded IRQ to handle the user interrupts.
This will allow to avoid disabling interrupts when the user process
registers for a new event and to avoid long handling inside an
interrupt.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
The policy file of the events reset has been modified.
This change is reflected in the autogenerated file.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
When getting an event, add the ability to deduce the reset type from
the IRQ map table instead of using hard reset regardless.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
The graceful reset mechanism is currently enabled only for reset
requests that will end up with hard-reset.
In future, reset requests due to errors in some device engines, are
going to be modified to request compute-reset, as the much longer
hard-reset is not really needed there.
To allow it, enable graceful reset also for compute-reset, and reset
after user releases the device won't be escalated to hard-reset in those
cases.
If watchdog expires and user didn't release the device, hard-reset will
be initiated in any case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
In case a compute reset has failed or a request for a hard reset has
just arrived, then we escalate current reset procedure from compute
to hard-reset.
In such a case, the FW should be aware of the updated error cause,
and if LKD is the one who performs the reset (rather than the FW),
then we ask the FW to disable PCI access.
We would also like to have relevant debug info and therefore
we print the currently escalating reset type.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>