adc218676e
157 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dave Vasilevsky
|
31daa34315 |
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes:
|
||
|
Linus Torvalds
|
3630400697 |
LoongArch changes for v6.12
1, Fix objtool about do_syscall() and Clang; 2, Enable generic CPU vulnerabilites support; 3, Enable ACPI BGRT handling; 4, Rework CPU feature probe from CPUCFG/IOCSR; 5, Add ARCH_HAS_SET_MEMORY support; 6, Add ARCH_HAS_SET_DIRECT_MAP support; 7, Improve hardware page table walker; 8, Simplify _percpu_read() and _percpu_write(); 9, Add advanced extended IRQ model documentions; 10, Some bug fixes and other small changes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmbybXsWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeomkEAChdhm2LxxBoUX8qn5EoUmSG041 EfJ2uJYulfbjlaCTyMJZBddWDNm2Le2Mq+LtJT5e4S7zPaLAV0FZOw5x6/fnj4GW a6sxjD35hrKXMeV9rNi1jrTG5zTUEMFA3tsQTs9+f/BGdIhQ3dvUrscRXgJgkFex v1W/18vCsSNfg58F3PG+wupKlxA69x0p/sIXtU1lqWN8RZiHFIhtW6FjVFDbiP3c NRdg1/oRI0FeEtnA+S6KJppDbXq1J5ZsEoSNTugAcpeYXBCI52N4j5CholmZ/JRw WwewCPeedS6ZQn8HlYygZlHrJEIevT9tVOoeJJhDj2Zz8LeReLZqai/Rf01hFH1T ZNx9Pwt9E4YQ6iHhYchxgDd7MNjJS8HbLHuZUC0zsA085CwPj1yimflU7r0CI1qA 8vq0hodkpvrseZw3E0JpT9Jip5sO74UK4/Zr5xjzlWy1C4oJajP+FOEcjuzen1Tn w1UIRG5prD6nL4+SoNSY8jkKjjLqLgStaovh8bkgIh8mM5DAzSgYk+6kehTVXxAB 7TPu4FNHzoP9Py3paot1I9q9pMZWS6f7B6EpmmIUF/l1HSwgSys5ivxiTbGWJrkM 6Iq3UkgNVLa8MFDHlHZ9OlQkBID3VrCEHZYvbFrJWkRFNZ/anEPTyCjtr/OehI1G HjSJKIXAr0t/tVZkqg== =JyR/ -----END PGP SIGNATURE----- Merge tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Fix objtool about do_syscall() and Clang - Enable generic CPU vulnerabilites support - Enable ACPI BGRT handling - Rework CPU feature probe from CPUCFG/IOCSR - Add ARCH_HAS_SET_MEMORY support - Add ARCH_HAS_SET_DIRECT_MAP support - Improve hardware page table walker - Simplify _percpu_read() and _percpu_write() - Add advanced extended IRQ model documentions - Some bug fixes and other small changes * tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: Docs/LoongArch: Add advanced extended IRQ model description LoongArch: Remove posix_types.h include from sigcontext.h LoongArch: Fix memleak in pci_acpi_scan_root() LoongArch: Simplify _percpu_read() and _percpu_write() LoongArch: Improve hardware page table walker LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support LoongArch: Add ARCH_HAS_SET_MEMORY support LoongArch: Rework CPU feature probe from CPUCFG/IOCSR LoongArch: Enable ACPI BGRT handling LoongArch: Enable generic CPU vulnerabilites support LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall) LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM LoongArch: Enable objtool for Clang objtool: Handle frame pointer related instructions |
||
|
Huacai Chen
|
f04de6d8f2 |
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See
|
||
|
Huacai Chen
|
e86935f705 |
LoongArch: Add ARCH_HAS_SET_MEMORY support
Add set_memory_ro/rw/x/nx architecture hooks to change the page attribution. Use own set_memory.h rather than generic set_memory.h (i.e. include/asm-generic/set_memory.h), because we want to add other function prototypes here. Note: We can only set attributes for KVRANGE/XKVRANGE kernel addresses. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
e8dd556c74 |
LoongArch: Enable generic CPU vulnerabilites support
Currently, many architectures support generic CPU vulnerabilites, such as x86, arm64 and riscv: commit |
||
|
Linus Torvalds
|
4a39ac5b7d |
Random number generator updates for Linux 6.12-rc1.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmboHyUACgkQSfxwEqXe
A66wGQ/8DRIjBllwf1YuTWi4T6OcfoYxK6C9bXO6QPP5gzdTyFE9pvDuuPyad6+F
FR086ydTHeodemz1dFiQCL9etcUaxo4+6FRKyXKF9/1ezGbTA5nJd0/fKJGlqbI2
EoA4LNYHOsvCZk1BTpxRNWKeKphU9zQgQdSigy6Rx8p269UkGmIZjD1PtUc+vqfR
Ox0dK/Cswyo236fRi5HzaoMntWI4vXgLfxty0e1R7tfbstkCxSKWAON1lo3uHgkA
0HpJXWgWXAPt9gp++Fs/jGNpOqbt6IaKeV5f7CjYfvWhlFjNMhQxF+PbxknaZn/k
K0gQsItOIoFTfbQdLDIdfnj9awMdLW8FB2A1WXHpNr9pVC4ickPb1bMTF/XRd0tm
wBNu4BL0gklx6017KZg5uINMIduzMLGkBLRFiBW0en/sZMLTJTMg58BJn0CL1Pmh
1ll/Q3ToSMHalvxU2OnJagTwh4fzzCEpK/hW9WiDO4jSCsMXyX0clinrCjNo1JfA
tqgTWEy3uGtg+dg0Du9VD5JASbNQSJ0ZRnas5+qz10IRWWfTolrsk61dliXLQ4Sv
tSryDtsE2znwJF1Krh4aHNSSVhD5/l/8QaXkf9aZc/kkaHxwsx83FuWnqw6nMz8c
l4B2MbH0jUgsEqEyx+0iwk+FXE9kZKWumTVLjFZ6bRnq3q+uq0U=
=mWCw
-----END PGP SIGNATURE-----
Merge tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
||
|
Tiezhu Yang
|
a7e0837724 |
LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM
When building kernel with "make CC=clang defconfig", LLVM Assembler is
used due to LLVM_IAS=0 is not specified, then AS_HAS_THIN_ADD_SUB is not
set, thus objtool can not be built after enable it for Clang.
config AS_HAS_THIN_ADD_SUB is to check whether -mthin-add-sub option is
available to know R_LARCH_{32,64}_PCREL are supported for GNU Assembler,
there is no such an option for LLVM Assembler. The minimal version of
Clang is 18 for building LoongArch kernel, and Clang >= 17 has already
supported R_LARCH_{32,64}_PCREL, that is to say, there is no need to
depend on AS_HAS_THIN_ADD_SUB for Clang, so just set AS_HAS_THIN_ADD_SUB
as y if AS_IS_LLVM.
Fixes:
|
||
|
Tiezhu Yang
|
b8468bd92a |
LoongArch: Enable objtool for Clang
For now, it can enable objtool for Clang, just remove !CC_IS_CLANG for HAVE_OBJTOOL in arch/loongarch/Kconfig. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Xi Ruoyao
|
18efd0b10e |
LoongArch: vDSO: Wire up getrandom() vDSO implementation
Hook up the generic vDSO implementation to the LoongArch vDSO data page by providing the required __arch_chacha20_blocks_nostack, __arch_get_k_vdso_rng_data, and getrandom_syscall implementations. Also wire up the selftests. Signed-off-by: Xi Ruoyao <xry111@xry111.site> Acked-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Tianyang Zhang
|
ae16f05c92 |
irqchip/loongarch-avec: Add AVEC irqchip support
Introduce the advanced extended interrupt controllers (AVECINTC). This
feature will allow each core to have 256 independent interrupt vectors
and MSI interrupts can be independently routed to any vector on any CPU.
The whole topology of irqchips in LoongArch machines looks like this if
AVECINTC is supported:
+-----+ +-----------------------+ +-------+
| IPI | --> | CPUINTC | <-- | Timer |
+-----+ +-----------------------+ +-------+
^ ^ ^
| | |
+---------+ +----------+ +---------+ +-------+
| EIOINTC | | AVECINTC | | LIOINTC | <-- | UARTs |
+---------+ +----------+ +---------+ +-------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+---------+ +---------+ +---------+
| Devices | | PCH-LPC | | Devices |
+---------+ +---------+ +---------+
^
|
+---------+
| Devices |
+---------+
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823104337.25577-2-zhangtianyang@loongson.cn
|
||
|
Linus Torvalds
|
c9f33436d8 |
RISC-V Patches for the 6.11 Merge Window, Part 2
* Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. * The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. * Support for HAVE_ARCH_STACKLEAK. * The sv39 linear map has been extended to support 128GiB mappings. * The frequency of the mtime CSR is now visible via hwprobe. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmaj2EYTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiVG3D/9kNHTI09iPDJd6fTChE3cpMxy7xXXE URX3Avu+gYsJmIbYyg4RnQ8FGFN7icKBCrQqs7JmLliU0NU+YMcCcjsJA2QaivbD VAlaex1qNcvNGteHrpbqhr3Zs4zw8GlBkB3KFTLyPAp61bybGo0a/A5ONJ7ScQIW RWHewAPgb86cQ0Q34JpO87TqvMM0KMvhQP5dip+olaFjLRBzhXmGFZfHqA80kTWl 0ytYclVCHZMtO/5mnQpuIOVs1IKw9L4wa0sivOQF0iLTqfKDFALa6yZsThHA/w3e JVuBAdQhcPZ3fgO2fUfJPlW16GmRC2/tdiFg5NFw8k4vo7DYBwX55ztPKXqDrJDM 8ah85IeLiPar/A/uHdn6bPjK+aGMuzklKF50r62XXAc2fL8mza1sdvKCVOy2EOLn JyGI9c/10KpvN/DW8g7hPefhvbx4+tCKkFcPqf++VQha6W8cQdCKi+Li0Pm8TTnp XPQjIvSlDDG1Pl4ofgBSFoyB8pkBXNzvv8NZp+YYtnqSOLAKaZuP+KwA8TwHdvGM pdCXcL3KHiLy4/pJWEoNTutD0mbJ7PUIb2P/KkjqYDgp4F1n0Hg+/aeSIp+7a4Pv yTBctIGxrlriQMIdtWCR8tyhcPP4pDpGYkW0K15EE16G0NK0fjD89LEXYqT6ae2R C0QgiwnVe/eopg== =zeUn -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. - The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. - Support for HAVE_ARCH_STACKLEAK. - The sv39 linear map has been extended to support 128GiB mappings. - The frequency of the mtime CSR is now visible via hwprobe. * tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) RISC-V: Provide the frequency of time CSR via hwprobe riscv: Extend sv39 linear mapping max size to 128G riscv: enable HAVE_ARCH_STACKLEAK riscv: signal: Remove unlikely() from WARN_ON() condition riscv: Improve exception and system call latency RISC-V: Select ACPI PPTT drivers riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init() RISC-V: ACPI: Enable SPCR table for console output on RISC-V riscv: boot: remove duplicated targets line trace: riscv: Remove deprecated kprobe on ftrace support riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions RISC-V: run savedefconfig for defconfig RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: Add handler for SRAT RINTC affinity structure ... |
||
|
Linus Torvalds
|
a362ade892 |
LoongArch changes for v6.11
1, Define __ARCH_WANT_NEW_STAT in unistd.h; 2, Always enumerate MADT and setup logical-physical CPU mapping; 3, Add irq_work support via self IPIs; 4, Add RANDOMIZE_KSTACK_OFFSET support; 5, Add ARCH_HAS_PTE_DEVMAP support; 6, Add ARCH_HAS_DEBUG_VM_PGTABLE support; 7, Add writecombine support for DMW-based ioremap(); 8, Add architectural preparation for CPUFreq; 9, Add ACPI standard hardware register based S3 support; 10, Add support for relocating the kernel with RELR relocation; 11, Some bug fixes and other small changes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmabzOsWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeqssD/9AG3WGb25R4IvgnZYuRCxpXsLk Qrj4YSPazaTLrQBWk1g+KqcBLe+jZV4zmnz0H93qoOpyMDwsmExugDug7QCKiBl1 olVZ0CeQ6dyMHAnFjTgy29KcyJRFith4jXFGq6kpNa80pezsXz7b869GkLZflZfy W9hALfcaxB4kx+z4HXblbOIsfzVwh2eBD/nkWukBG28CPMQ7pV4TtejIqSd9kDC5 LQjVQhjyrDgR3EPJEzr+48/hgFB6cZ8fmfv5JVTu+rQMngUldxDijj8xfoIUgIjN 2khFc2Orx5RVyIuBxtLKWf70HD9xXC0fqUVjFEn0Yn5i1JVLoMdqjownSWvPy3t7 z3V0E0VaYUdLgA3GeA5Fw1uZbORlocAZbA5B8bXY2foNfwPwLlGpNiyNiqx5kQmQ O+9jQJqdrZZ18wXEW8sR8AnT5+lzIQdv1GlkYt2f5a1rjMZwHtPZI4aPRDojPo/3 Fv0Q1+2XVnbPngzJJz9tlYCzt5iuY9z7DwsnbEBSiLZRapJ9ZECmJjSGnnR/fLLS ifdyooua8bviMwzmUEmfSgPRHyTZs+BjkD7AQ4xyRDAv0T2d9sDwkAWYBcViTslF awe6+x+zn6yXekhiloN8L+3HJ67bYojXmLciNqvFcVtSNgJQpXBjLDO9orCbNqmw ISxNA0GbR+eWGMdvCA== =bla1 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Define __ARCH_WANT_NEW_STAT in unistd.h - Always enumerate MADT and setup logical-physical CPU mapping - Add irq_work support via self IPIs - Add RANDOMIZE_KSTACK_OFFSET support - Add ARCH_HAS_PTE_DEVMAP support - Add ARCH_HAS_DEBUG_VM_PGTABLE support - Add writecombine support for DMW-based ioremap() - Add architectural preparation for CPUFreq - Add ACPI standard hardware register based S3 support - Add support for relocating the kernel with RELR relocation - Some bug fixes and other small changes * tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Make the users of larch_insn_gen_break() constant LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint LoongArch: Use rustc option -Zdirect-access-external-data LoongArch: Add support for relocating the kernel with RELR relocation LoongArch: Remove a redundant checking in relocator LoongArch: Use correct API to map cmdline in relocate_kernel() LoongArch: Automatically disable KASLR for hibernation LoongArch: Add ACPI standard hardware register based S3 support LoongArch: Add architectural preparation for CPUFreq LoongArch: Add writecombine support for DMW-based ioremap() LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support LoongArch: Add ARCH_HAS_PTE_DEVMAP support LoongArch: Add RANDOMIZE_KSTACK_OFFSET support LoongArch: Add irq_work support via self IPIs LoongArch: Always enumerate MADT and setup logical-physical CPU mapping LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h |
||
|
Palmer Dabbelt
|
6a4aa4c94b
|
Merge patch series "Add ACPI NUMA support for RISC-V"
Haibo Xu <haibo1.xu@intel.com> says:
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].
Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.
Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
|
||
|
Haibo Xu
|
adc3e82d25
|
ACPI: NUMA: change the ACPI_NUMA to a hidden option
x86/arm64/loongarch would select ACPI_NUMA by default and riscv would do the same thing, so change it to a hidden option and the select statements except for the X86_64_ACPI_NUMA can also go away. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/f1f96377b8ecd6e3183f28abf5c9ac21cb9855ea.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Xi Ruoyao
|
e05d4cd9b8 |
LoongArch: Add support for relocating the kernel with RELR relocation
RELR as a relocation packing format for relative relocations for reducing the size of relative relocation records. In a position independent executable there are often many relative relocation records, and our vmlinux is a PIE. The LLD linker (since 17.0.0) and the BFD linker (since 2.43) supports packing the relocations in the RELR format for LoongArch, with the flag -z pack-relative-relocs. Commits |
||
|
Huacai Chen
|
f60d251b27 |
LoongArch: Add architectural preparation for CPUFreq
Add architectural preparation for CPUFreq driver, including: Kconfig, register definition and platform device registration. Some of LoongArch processors support DVFS, their IOCSR.FEATURES has IOCSRF_FREQSCALE set. And they has a micro-core in the package called SMC (System Management Controller) to scale frequency, voltage, etc. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
614d7e9975 |
LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
Add ARCH_HAS_DEBUG_VM_PGTABLE selection in Kconfig, in order to make corresponding vm debug features usable on LoongArch. Also update the corresponding arch-support.txt document. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
b7a2750ef2 |
LoongArch: Add ARCH_HAS_PTE_DEVMAP support
In order for things like get_user_pages() to work on ZONE_DEVICE memory, we need a software PTE bit to identify device-backed PFNs. Hook this up along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Jinjie Ruan
|
a0f7085f6a |
LoongArch: Add RANDOMIZE_KSTACK_OFFSET support
Add support of kernel stack offset randomization while handling syscall, the offset is defaultly limited by KSTACK_OFFSET_MAX(). In order to avoid triggering stack canaries (due to __builtin_alloca()) and slowing down the entry path, use __no_stack_protector attribute to disable stack protector for do_syscall() at function level. With this patch, the REPORT_STACK test show that: `loongarch64 bits of stack entropy: 7` Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
03779999ac |
LoongArch: KVM: Add PV steal time support in guest side
Per-cpu struct kvm_steal_time is added here, its size is 64 bytes and also defined as 64 bytes, so that the whole structure is in one physical page. When a VCPU is online, function pv_enable_steal_time() is called. This function will pass guest physical address of struct kvm_steal_time and tells hypervisor to enable steal time. When a vcpu is offline, physical address is set as 0 and tells hypervisor to disable steal time. Here is an output of vmstat on guest when there is workload on both host and guest. It shows steal time stat information. procs -----------memory---------- -----io---- -system-- ------cpu----- r b swpd free inact active bi bo in cs us sy id wa st 15 1 0 7583616 184112 72208 20 0 162 52 31 6 43 0 20 17 0 0 7583616 184704 72192 0 0 6318 6885 5 60 8 5 22 16 0 0 7583616 185392 72144 0 0 1766 1081 0 49 0 1 50 16 0 0 7583616 184816 72304 0 0 6300 6166 4 62 12 2 20 18 0 0 7583632 184480 72240 0 0 2814 1754 2 58 4 1 35 Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Xi Ruoyao
|
120dd4118e |
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
GAS <= 2.41 does not support generating R_LARCH_{32,64}_PCREL for
"label - ." and it generates R_LARCH_{ADD,SUB}{32,64} pairs instead.
Objtool cannot handle R_LARCH_{ADD,SUB}{32,64} pair in __jump_table
(static key implementation) and etc. so it will produce some warnings.
This is causing the kernel CI systems to complain everywhere.
For GAS we can check if -mthin-add-sub option is available to know if
R_LARCH_{32,64}_PCREL are supported.
For Clang, we require Clang >= 18 and Clang >= 17 already supports
R_LARCH_{32,64}_PCREL. But unfortunately Clang has some other issues,
so we disable objtool for Clang at present.
Note that __jump_table here is not generated by the compiler, so
-fno-jump-table is completely irrelevant for this issue.
Fixes:
|
||
|
Linus Torvalds
|
c760b3725e |
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer AMD
GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6OSAAKCRDdBJ7gKXxA
jpTGAP9hQaZ+g7CO38hKQAtEI8rwcZJtvUAP84pZEGMjYMGLxQD/S8z1o7UHx61j
DUbnunbOkU/UcPx3Fs/gp4KcJARMEgs=
=EPi9
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
|
||
|
Linus Torvalds
|
4f05e82003 |
LoongArch changes for v6.10
1, Select some options in Kconfig; 2, Give a chance to build with !CONFIG_SMP; 3, Switch to use built-in rustc target; 4, Add new supported device nodes to dts; 5, Some bug fixes and other small changes; 6, Update the default config file. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmZKCycWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeoXWD/9pFhbbJj49T1xiwc2j/XgQL8HI s88/h4z5AXEbHFO8XIG1Cpw/Z3a1DsCiWBsOkCogagILzYuN0r7UqcrI02ZoeY6N fbuDatB3i+hJWCBzcl1HPkFy/9av4j4EktZs0+X/wVgKkd0aIh78qs8+1RwKhshf FoOv+cMu7zFS8Jrt+w16diNCY1JsDv7TCkCVhvJxAodrtGg4oo2NPfrGOrKAP8Dq LClvFEqDcXq1kKcipw3Q7BwDlBpJEvLZ0iAl19BnLAmBzI3Wfze9ouoYv8WiUyaY br0GPShGf16I3DKtTdHsHH/zmayQ7JSmFzZ9JEHzcBrE4AprfWLuwsUjd2WXDD6U wK+p4tWd0AUFf+/h4u1yQB9/rlt+JZ2ny/A2u4YR/BPtthiYqp8SDSH62vpCSFOE dByDeTbfjTdJsWr+bsI2gOO0sVwDYpph9SJfAyBn4miKw7v8w+2rI1oqo/ZQkP59 0SczM9C9jzpgXSGDc4yQbnqoA4KA9U6zljd12mYL5HV/AjhD19va3FmENgByZUuE Z7A0RZsiU5T401xEZiOUhwzy9m/USc1O2ivCmeowx9kP/gWic0KeAsmlMiro0jeR y9jthci8iOgjjLmCEVC06GWGUojP2roXI/38We6enVevy2GXbEEDRa1QGbQ5ndoJ MEPm4NvW1wsBgWIYmg== =WR15 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Select some options in Kconfig - Give a chance to build with !CONFIG_SMP - Switch to use built-in rustc target - Add new supported device nodes to dts - Some bug fixes and other small changes - Update the default config file * tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Update Loongson-3 default config file LoongArch: dts: Add new supported device nodes to Loongson-2K2000 LoongArch: dts: Add new supported device nodes to Loongson-2K0500 LoongArch: dts: Remove "disabled" state of clock controller node LoongArch: rust: Switch to use built-in rustc target LoongArch: Fix callchain parse error with kernel tracepoint events again LoongArch: Give a chance to build with !CONFIG_SMP LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 LoongArch: Select ARCH_HAS_FAST_MULTIPLIER |
||
|
Samuel Holland
|
372f662345 |
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch already provides kernel_fpu_begin() and kernel_fpu_end() in asm/fpu.h, so it only needs to add kernel_fpu_available() and export the CFLAGS adjustments. Link: https://lkml.kernel.org/r/20240329072441.591471-8-samuel.holland@sifive.com Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Tiezhu Yang
|
5685d7fcb5 |
LoongArch: Give a chance to build with !CONFIG_SMP
In the current code, SMP is selected in Kconfig for LoongArch, the users
can not unset it, this is reasonable for a multi-processor machine. But
as the help info of config SMP said, if you have a system with only one
CPU, say N. On a uni-processor machine, the kernel will run faster if you
say N here.
Loongson-2K0500 is a single-core CPU for applications like industrial
control, printing terminals, and BMC (Baseboard Management Controller),
there are many development boards, products and solutions on the market,
so it is better and necessary to give a chance to build with !CONFIG_SMP
for a uni-processor machine.
First of all, do not select SMP for config LOONGARCH in Kconfig to make
it possible to unset CONFIG_SMP. Then, do some changes to fix warnings
and errors if CONFIG_SMP is not set.
(1) Define get_ipi_irq() only if CONFIG_SMP is set to fix the warning:
arch/loongarch/kernel/irq.c:90:19: warning: 'get_ipi_irq' defined but not used [-Wunused-function]
(2) Add "#ifdef CONFIG_SMP" in asm/smp.h to fix the warning:
./arch/loongarch/include/asm/smp.h:49:9: warning: "raw_smp_processor_id" redefined
49 | #define raw_smp_processor_id raw_smp_processor_id
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/smp.h:198:9: note: this is the location of the previous definition
198 | #define raw_smp_processor_id() 0
(3) Define machine_shutdown() as empty under !CONFIG_SMP to fix the error:
arch/loongarch/kernel/machine_kexec.c: In function 'machine_shutdown':
arch/loongarch/kernel/machine_kexec.c:233:25: error: implicit declaration of function 'cpu_device_up'; did you mean 'put_device'? [-Wimplicit-function-declaration]
(4) Make config SCHED_SMT depends on SMP to fix many errors such as:
kernel/sched/core.c: In function 'sched_core_find':
kernel/sched/core.c:310:43: error: 'struct rq' has no member named 'cpu'
(5) Define cpu_logical_map(cpu) as 0 under !CONFIG_SMP in asm/smp.h,
then include asm/smp.h in asm/acpi.h (because acpi.h is included in
linux/irq.h indirectly) to fix many build errors under drivers/irqchip
such as:
drivers/irqchip/irq-loongson-eiointc.c: In function 'cpu_to_eio_node':
drivers/irqchip/irq-loongson-eiointc.c:59:16: error: implicit declaration of function 'cpu_logical_map' [-Wimplicit-function-declaration]
(6) Do not write per_cpu_offset(0) to PERCPU_BASE_KS when resume because
the per_cpu_offset(x) macro is defined as (__per_cpu_offset[x]) only
under CONFIG_SMP in include/asm-generic/percpu.h. Just save the value of
PERCPU_BASE_KS when suspend and restore it when resume to fix the error:
arch/loongarch/power/suspend.c: In function 'loongarch_common_resume':
arch/loongarch/power/suspend.c:47:21: error: implicit declaration of function 'per_cpu_offset' [-Wimplicit-function-declaration]
(7) Fix huge page handling under !CONFIG_SMP in tlbex.S.
When running the UnixBench tests with "-c 1" single-streamed pass, the
improvement of performance is about 9 percent with this patch.
By the way, it is helpful to debug and analysis the kernel issues of
multi-processor system under !CONFIG_SMP.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Huacai Chen
|
ff4a2443ef |
LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
THP_SWAP has been proven to improve the swap throughput significantly on x86_64 system according to commit |
||
|
Huacai Chen
|
d0b35b0247 |
LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
BPF JIT has better performance and more secure than BPF interpreter, so enable it by default, as most other architectures done. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Xi Ruoyao
|
5125d033c8 |
LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
This allows compiling a full 128-bit product of two 64-bit integers as a
mul/mulh pair, instead of a nasty long sequence of 20+ instructions.
However, after selecting ARCH_SUPPORTS_INT128, when optimizing for size
the compiler generates calls to __ashlti3, __ashrti3, and __lshrti3 for
shifting __int128 values, causing a link failure:
loongarch64-unknown-linux-gnu-ld: kernel/sched/fair.o: in
function `mul_u64_u32_shr':
<PATH>/include/linux/math64.h:161:(.text+0x5e4): undefined
reference to `__lshrti3'
So provide the implementation of these functions if ARCH_SUPPORTS_INT128.
Closes: https://lore.kernel.org/loongarch/CAAhV-H5EZ=7OF7CSiYyZ8_+wWuenpo=K2WT8-6mAT4CvzUC_4g@mail.gmail.com/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Xi Ruoyao
|
2cce905959 |
LoongArch: Select ARCH_HAS_FAST_MULTIPLIER
LA464 and LA664 can do 32-bit/64-bit integer multiplication with a latency of 4 cycles and a throughput of 2 ops per cycle. It is comparable to the mainstream x86 and arm64 cores, so we can select ARCH_HAS_FAST_MULTIPLIER like them. It speeds up __sw_hweight32() in lib/hweight.c for about 14% on LA464 and 11% on LA664, while __sw_hweight64() for about 30% on LA464 and 33% on LA664. Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
74c16b2e2b |
LoongArch: KVM: Add PV IPI support on guest side
PARAVIRT config option and PV IPI is added for the guest side, function pv_ipi_init() is used to add IPI sending and IPI receiving hooks. This function firstly checks whether system runs in VM mode, and if kernel runs in VM mode, it will call function kvm_para_available() to detect the current hypervirsor type (now only KVM type detection is supported). The paravirt functions can work only if current hypervisor type is KVM, since there is only KVM supported on LoongArch now. PV IPI uses virtual IPI sender and virtual IPI receiver functions. With virtual IPI sender, IPI message is stored in memory rather than emulated HW. IPI multicast is also supported, and 128 vcpus can received IPIs at the same time like X86 KVM method. Hypercall method is used for IPI sending. With virtual IPI receiver, HW SWI0 is used rather than real IPI HW. Since VCPU has separate HW SWI0 like HW timer, there is no trap in IPI interrupt acknowledge. Since IPI message is stored in memory, there is no trap in getting IPI message. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
David Hildenbrand
|
25176ad09c |
mm/treewide: rename CONFIG_HAVE_FAST_GUP to CONFIG_HAVE_GUP_FAST
Nowadays, we call it "GUP-fast", the external interface includes functions like "get_user_pages_fast()", and we renamed all internal functions to reflect that as well. Let's make the config option reflect that. Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baoquan He
|
697f334247 |
LoongArch: Fix Kconfig item and left code related to CRASH_CORE
In commit |
||
|
Linus Torvalds
|
1e3cd03c54 |
LoongArch changes for v6.9
1, Add objtool support for LoongArch;
2, Add ORC stack unwinder support for LoongArch;
3, Add kernel livepatching support for LoongArch;
4, Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig;
5, Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig;
6, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=lSkY
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
|
||
|
Huacai Chen
|
f48ad26e5e |
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
This allocates the VM flag needed to support the userfaultfd minor fault
functionality. See commit
|
||
|
Huacai Chen
|
8b5db5e533 |
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch has implemented the current_stack_pointer macro, so select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig. This will let it be used in non-arch places (like HARDENED_USERCOPY). Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
4f712ee0cb |
S390:
* Changes to FPU handling came in via the main s390 pull request
* Only deliver to the guest the SCLP events that userspace has
requested.
* More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same).
* Fix selftests undefined behavior.
x86:
* Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can be
programmed *using the architectural encoding*. The enumeration does
NOT say anything about the encoding when the CPU doesn't report support
the event *in general*. It might support it, and it might support it
using the same encoding that made it into the architectural PMU spec.
* Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly emulates
RDMPC, counter availability, and a variety of other PMC-related
behaviors that depend on guest CPUID and therefore are easier to
validate with selftests than with custom guests (aka kvm-unit-tests).
* Zero out PMU state on AMD if the virtual PMU is disabled, it does not
cause any bug but it wastes time in various cases where KVM would check
if a PMC event needs to be synthesized.
* Optimize triggering of emulated events, with a nice ~10% performance
improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
guest.
* Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
* Fix a bug where KVM would report stale/bogus exit qualification information
when exiting to userspace with an internal error exit code.
* Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
* Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
* Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM
doesn't support yielding in the middle of processing a zap, and 1GiB
granularity resulted in multi-millisecond lags that are quite impolite
for CONFIG_PREEMPT kernels.
* Allocate write-tracking metadata on-demand to avoid the memory overhead when
a kernel is built with i915 virtualization support but the workloads use
neither shadow paging nor i915 virtualization.
* Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives.
* Fix the debugregs ABI for 32-bit KVM.
* Rework the "force immediate exit" code so that vendor code ultimately decides
how and when to force the exit, which allowed some optimization for both
Intel and AMD.
* Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, causing extra unnecessary work.
* Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
* Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere in the
kernel) are detected earlier and are less likely to hang the kernel.
x86 Xen emulation:
* Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the
gpa but the underlying host virtual address remains the same.
* When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
* Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
* Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
RISC-V:
* Support exception and interrupt handling in selftests
* New self test for RISC-V architectural timer (Sstc extension)
* New extension support (Ztso, Zacas)
* Support userspace emulation of random number seed CSRs.
ARM:
* Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
* Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
* Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
* Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
* Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
* Misc cleanups and fixes as usual.
Generic:
* cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
true on all architectures except MIPS (where Kconfig determines the
available depending on CPU capabilities). It is replaced either by
an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
everywhere else.
* Factor common "select" statements in common code instead of requiring
each architecture to specify it
* Remove thoroughly obsolete APIs from the uapi headers.
* Move architecture-dependent stuff to uapi/asm/kvm.h
* Always flush the async page fault workqueue when a work item is being
removed, especially during vCPU destruction, to ensure that there are no
workers running in KVM code when all references to KVM-the-module are gone,
i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
* Grab a reference to the VM's mm_struct in the async #PF worker itself instead
of gifting the worker a reference, so that there's no need to remember
to *conditionally* clean up after the worker.
Selftests:
* Reduce boilerplate especially when utilize selftest TAP infrastructure.
* Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
* Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
=mqOV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
|
Jinyang He
|
199cc14cb4 |
LoongArch: Add kernel livepatching support
The arch-specified function ftrace_regs_set_instruction_pointer() has been implemented in arch/loongarch/include/asm/ftrace.h, so here only implement arch_stack_walk_reliable() function. Here are the test logs: [root@linux fedora]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-6.8.0-rc2 root=/dev/sda3 [root@linux fedora]# modprobe livepatch-sample [root@linux fedora]# cat /proc/cmdline this has been live patched [root@linux fedora]# echo 0 > /sys/kernel/livepatch/livepatch_sample/enabled [root@linux fedora]# rmmod livepatch_sample [root@linux fedora]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-6.8.0-rc2 root=/dev/sda3 [root@linux fedora]# dmesg -t | tail -5 livepatch: enabling patch 'livepatch_sample' livepatch: 'livepatch_sample': starting patching transition livepatch: 'livepatch_sample': patching complete livepatch: 'livepatch_sample': starting unpatching transition livepatch: 'livepatch_sample': unpatching complete Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
cb8a2ef084 |
LoongArch: Add ORC stack unwinder support
The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is similar in concept to a DWARF unwinder. The difference is that the format of the ORC data is much simpler than DWARF, which in turn allows the ORC unwinder to be much simpler and faster. The ORC data consists of unwind tables which are generated by objtool. After analyzing all the code paths of a .o file, it determines information about the stack state at each instruction address in the file and outputs that information to the .orc_unwind and .orc_unwind_ip sections. The per-object ORC sections are combined at link time and are sorted and post-processed at boot time. The unwinder uses the resulting data to correlate instruction addresses with their stack states at run time. Most of the logic are similar with x86, in order to get ra info before ra is saved into stack, add ra_reg and ra_offset into orc_entry. At the same time, modify some arch-specific code to silence the objtool warnings. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Arnd Bergmann
|
ba89f9c8cc |
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
These four architectures define the same Kconfig symbols for configuring the page size. Move the logic into a common place where it can be shared with all other architectures. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Paolo Bonzini
|
f48212ee8e |
treewide: remove CONFIG_HAVE_KVM
It has no users anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Masahiro Yamada
|
6b79ecd084 |
LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu
LoongArch missed the refactoring made by commit
|
||
|
Masahiro Yamada
|
b3ff2d9c3a |
LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it
ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
24fdd51899 |
LoongArch changes for v6.8
1, Raise minimum clang version to 18.0.0; 2, Enable initial Rust support for LoongArch; 3, Add built-in dtb support for LoongArch; 4, Use generic interface to support crashkernel=X,[high,low]; 5, Some bug fixes and other small changes; 6, Update the default config file. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmWnW9cWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImel3CD/0Wnd2VOhoPubJkCXd+v7SdPDFB +BlkevAdmKQXkxNVXHRwfirsEBnUdQTfSN/5hMd69ZWUTayYq3WFxOcaPs27AAyn cXmGAzxfCjanSj+zxK8Gcmef5kppx3PRSbFdnWgc42Povu0xTOH3M31HXx5WXGtv hZK439DspNGHlF1Bsbs3J8xbS76jc/HDZAqnIjLuefQUaWM8nhsYxJIwVeGKUX1T IyEgBwhHhsY9ho/86yk8VXgordAN4dnMVmAHbR63HqjLo/8sck4IiPNxWKFCHex8 vgxp0zGxfBBts284EfSofDQHrSrrWl4+e2fW2QJ81BBDSS0wPCs4TAnzH+x9X7Wb MJuh8WIJqhfXdPFxs5fdnUeykEm1V/oWFfkWORk4jbQkpY9aZbk/iv6uxsmRhmhv 2WPWvjF+7B2zSXtMcjgm71ymb/nU95W2FZO02GlwTnbGJRKA2xLkjn9rCXoHWjd3 IlxgIgZJ1vkPvFPS/sbekaTUEG+6/qTPGGa2Ol3Q5ZTTLk9serfDa8ay1xCZeOny +fRBgLsuQAOGO2pvxfXjs+uvboZNUHeKrAi7XeR61GcbNpQDkjuwNJXQMiMQ+f66 jWM6H+hV+6sQ/W43KVrGCyBqTX4J9PSN/gX/Cq0PL74Yheop6neYXZTl5uDNYDe9 WYxiS9j/FoYgj8lxYQ== =GzFR -----END PGP SIGNATURE----- Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Raise minimum clang version to 18.0.0 - Enable initial Rust support for LoongArch - Add built-in dtb support for LoongArch - Use generic interface to support crashkernel=X,[high,low] - Some bug fixes and other small changes - Update the default config file. * tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) MAINTAINERS: Add BPF JIT for LOONGARCH entry LoongArch: Update Loongson-3 default config file LoongArch: BPF: Prevent out-of-bounds memory access LoongArch: BPF: Support 64-bit pointers to kfuncs LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch: Fix and simplify fcsr initialization on execve() LoongArch: Let cores_io_master cover the largest NR_CPUS LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch: Add a missing call to efi_esrt_init() LoongArch: Parsing CPU-related information from DTS LoongArch: dts: DeviceTree for Loongson-2K2000 LoongArch: dts: DeviceTree for Loongson-2K1000 LoongArch: dts: DeviceTree for Loongson-2K0500 LoongArch: Allow device trees be built into the kernel dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names dt-bindings: loongarch: Add Loongson SoC boards compatibles dt-bindings: loongarch: Add CPU bindings for LoongArch LoongArch: Enable initial Rust support ... |
||
|
Youling Tang
|
78de91b458 |
LoongArch: Use generic interface to support crashkernel=X,[high,low]
LoongArch already supports two crashkernel regions in kexec-tools, so we
can directly use the common interface to support crashkernel=X,[high,low]
after commit
|
||
|
Binbin Zhou
|
5f346a6e59 |
LoongArch: Allow device trees be built into the kernel
During the upstream progress of those DT-based drivers, DT properties are changed a lot so very different from those in existing bootloaders. It is inevitably that some existing systems do not provide a standard, canonical device tree to the kernel at boot time. So let's provide a device tree table in the kernel, keyed by the dts filename, containing the relevant DTBs. We can use the built-in dts files as references. Each SoC has only one built-in dts file which describes all possible device information of that SoC, so the dts files are good examples during development. And as a reference, our built-in dts file only enables the most basic bootable combinations (so it is generic enough), acts as an alternative in case the dts in the bootloader is unexpected. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Rui
|
90868ff9ca |
LoongArch: Enable initial Rust support
Enable initial Rust support for LoongArch. Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
James Morse
|
db3ba29a83 |
LoongArch: Switch over to GENERIC_CPU_DEVICES
Now that GENERIC_CPU_DEVICES calls arch_register_cpu(), which can be overridden by the arch code, switch over to this to allow common code to choose when the register_cpu() call is made. This allows topology_init() to be removed. This is an intermediate step to the logic being moved to drivers/acpi, where GENERIC_CPU_DEVICES will do the work when booting with acpi=off. This is a subtle change. Originally: - on boot, topology_init() would have marked present CPUs that io_master() is true for as hotplug-incapable. - if a CPU is hotplugged that is an io_master(), it can later be hot-unplugged. The new behaviour is that any CPU that io_master() is true for will now always be marked as hotplug-incapable, thus even if it was hotplugged, it can no longer be hot-unplugged. This patch also has the effect of moving the registration of CPUs from subsys to driver core initialisation, prior to any initcalls running. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R41-00Ct04-Bg@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
James Morse
|
a02f66bb3c |
ACPI: Move ACPI_HOTPLUG_CPU to be disabled on arm64 and riscv
Neither arm64 nor riscv support physical hotadd of CPUs that were not present at boot. For arm64 much of the platform description is in static tables which do not have update methods. arm64 does support HOTPLUG_CPU, which is backed by a firmware interface to turn CPUs on and off. acpi_processor_hotadd_init() and acpi_processor_remove() are for adding and removing CPUs that were not present at boot. arm64 systems that do this are not supported as there is currently insufficient information in the platform description. (e.g. did the GICR get removed too?) arm64 currently relies on the MADT enabled flag check in map_gicc_mpidr() to prevent CPUs that were not described as present at boot from being added to the system. Similarly, riscv relies on the same check in map_rintc_hartid(). Both architectures also rely on the weak 'always fails' definitions of acpi_map_cpu() and arch_register_cpu(). Subsequent changes will redefine ACPI_HOTPLUG_CPU as making possible CPUs present. Neither arm64 nor riscv support this. Disable ACPI_HOTPLUG_CPU for arm64 and riscv by removing 'default y' and selecting it on the other three ACPI architectures. This allows the weak definitions of some symbols to be removed. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R31-00Csyt-Jq@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
4eeee6636a |
LoongArch changes for v6.7
1, Support PREEMPT_DYNAMIC with static keys; 2, Relax memory ordering for atomic operations; 3, Support BPF CPU v4 instructions for LoongArch; 4, Some build and runtime warning fixes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmVQWXgWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImepDTEACS808EsgSNIM1+JwldhdqKOErt XDWlLuIddVpenInx8F+9GnZJzKBU+wl+Ow5ejcVarjcecIJDv5UhoVrbhpeOHkfv RszRXQR4p/ZNSFvdraYDjjJ9UX6bp5rq7vMUC2d9bLazMauAfwf7T/HJ5qj9OYZi RLlcwaKo2UQHYsT7nJicjh0qpH1YpZQBYTaUUCwzilzB6vAIOTf6X12vFmhtM/i+ 5RIPnesMA1IQSm2ywUODpDHCs7Pirvy8aJvx0CsYdi3xl1yg3pUS6u69Ms61uWlw 29yYhNbWmVnDikTVLTNISDb/jwto5SAVB2KQKBhF1trF4ZBNE6r7sP4m2tfllYo9 KXK9tm0U8McS5o46Qd5er6eEnxL7mEeAsc12tNKUYOMe3SIkmHJmj/rZQOtpsiBg zqQsYkGUfO2VAwMWiGke8dxPZElOYwZ3UCOpbEpXEXy3NW71VJTIuQFGmsYKJhdy 3xaAtQxdffE5yUTt2j3Y8Mex2b2oSUBSF263imsZjzWOOxd480iaoejtamf1V779 bElevzZjMDmbiQ7kiVSf96TWc7iYcSv33jhP4DorKIqnPseYPfrXEeD1xY7JV+IU kkvSlO0hAJzVMmQgu5n0PPT1wrVpuvwtbsfcRobIkr1vktZyLaKHRq7rh4R5HTRL ZUUm6c0kUDywGT+J4A== =bmFe -----END PGP SIGNATURE----- Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys |