Fixes a compiler warning. the bpf_jit_binary_pack_finalize function
was taking an extra bpf_prog parameter that went unused.
This removves it and updates the callers accordingly.
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Link: https://lore.kernel.org/r/20240615022641.210320-2-rafael@rcpassos.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Leon Hwang says:
====================
bpf, verifier: Correct tail_call_reachable for bpf prog
It's confusing to inspect 'prog->aux->tail_call_reachable' with drgn[0],
when bpf prog has tail call but 'tail_call_reachable' is false.
This patch corrects 'tail_call_reachable' when bpf prog has tail call.
Therefore, it's unnecessary to detect tail call in x86 jit. Let's remove
it.
Changes:
v1 -> v2:
* Address comment from Yonghong:
* Remove unnecessary tail call detection in x86 jit.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
---
Links:
[0] https://github.com/osandov/drgn
====================
Link: https://lore.kernel.org/r/20240610124224.34673-1-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As 'prog->aux->tail_call_reachable' is correct for tail call present,
it's unnecessary to detect tail call in x86 jit.
Therefore, let's remove it.
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240610124224.34673-3-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's confusing to inspect 'prog->aux->tail_call_reachable' with drgn[0],
when bpf prog has tail call but 'tail_call_reachable' is false.
This patch corrects 'tail_call_reachable' when bpf prog has tail call.
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240610124224.34673-2-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alan Maguire says:
====================
bpf: support resilient split BTF
Split BPF Type Format (BTF) provides huge advantages in that kernel
modules only have to provide type information for types that they do not
share with the core kernel; for core kernel types, split BTF refers to
core kernel BTF type ids. So for a STRUCT sk_buff, a module that
uses that structure (or a pointer to it) simply needs to refer to the
core kernel type id, saving the need to define the structure and its many
dependents. This cuts down on duplication and makes BTF as compact
as possible.
However, there is a downside. This scheme requires the references from
split BTF to base BTF to be valid not just at encoding time, but at use
time (when the module is loaded). Even a small change in kernel types
can perturb the type ids in core kernel BTF, and - if the new reproducible
BTF option is not used - pahole's parallel processing of compilation units
can lead to different type ids for the same kernel if the BTF is
regenerated.
So we have a robustness problem for split BTF for cases where a module is
not always compiled at the same time as the kernel. This problem is
particularly acute for distros which generally want module builders to be
able to compile a module for the lifetime of a Linux stable-based release,
and have it continue to be valid over the lifetime of that release, even
as changes in data structures (and hence BTF types) accrue. Today it's not
possible to generate BTF for modules that works beyond the initial
kernel it is compiled against - kernel bugfixes etc invalidate the split
BTF references to vmlinux BTF, and BTF is no longer usable for the
module.
The goal of this series is to provide options to provide additional
context for cases like this. That context comes in the form of
distilled base BTF; it stands in for the base BTF, and contains
information about the types referenced from split BTF, but not their
full descriptions. The modified split BTF will refer to type ids in
this .BTF.base section, and when the kernel loads such modules it
will use that .BTF.base to map references from split BTF to the
equivalent current vmlinux base BTF types. Once this relocation
process has succeeded, the module BTF available in /sys/kernel/btf
will look exactly as if it was built with the current vmlinux;
references to base types will be fixed up etc.
A module builder - using this series along with the pahole changes -
can then build a module with distilled base BTF via an out-of-tree
module build, i.e.
make -C . M=path/2/module
The module will have a .BTF section (the split BTF) and a
.BTF.base section. The latter is small in size - distilled base
BTF does not need full struct/union/enum information for named
types for example. For 2667 modules built with distilled base BTF,
the average size observed was 1556 bytes (stddev 1563). The overall
size added to this 2667 modules was 5.3Mb.
Note that for the in-tree modules, this approach is not needed as
split and base BTF in the case of in-tree modules are always built
and re-built together.
The series first focuses on generating split BTF with distilled base
BTF; then relocation support is added to allow split BTF with
an associated distlled base to be relocated with a new base BTF.
Next Eduard's patch allows BTF ELF parsing to work with both
.BTF and .BTF.base sections; this ensures that bpftool will be
able to dump BTF for a module with a .BTF.base section for example,
or indeed dump relocated BTF where a module and a "-B vmlinux"
is supplied.
Then we add support to resolve_btfids to ignore base BTF - i.e.
to avoid relocation - if a .BTF.base section is found. This ensures
the .BTF.ids section is populated with ids relative to the distilled
base (these will be relocated as part of module load).
Finally the series supports storage of .BTF.base data/size in modules
and supports sharing of relocation code with the kernel to allow
relocation of module BTF. For the kernel, this relocation
process happens at module load time, and we relocate split BTF
references to point at types in the current vmlinux BTF. As part of
this, .BTF.ids references need to be mapped also.
So concretely, what happens is
- we generate split BTF in the .BTF section of a module that refers to
types in the .BTF.base section as base types; the latter are not full
type descriptions but provide information about the base type. So
a STRUCT sk_buff would be represented as a FWD struct sk_buff in
distilled base BTF for example.
- when the module is loaded, the split BTF is relocated with vmlinux
BTF; in the case of the FWD struct sk_buff, we find the STRUCT sk_buff
in vmlinux BTF and map all split BTF references to the distilled base
FWD sk_buff, replacing them with references to the vmlinux BTF
STRUCT sk_buff.
A previous approach to this problem [1] utilized standalone BTF for such
cases - where the BTF is not defined relative to base BTF so there is no
relocation required. The problem with that approach is that from
the verifier perspective, some types are special, and having a custom
representation of a core kernel type that did not necessarily match the
current representation is not tenable. So the approach taken here was
to preserve the split BTF model while minimizing the representation of
the context needed to relocate split and current vmlinux BTF.
To generate distilled .BTF.base sections the associated dwarves
patch (to be applied on the "next" branch there) is needed [3]
Without it, things will still work but modules will not be built
with a .BTF.base section.
Changes since v5[4]:
- Update search of distilled types to return the first occurrence
of a string (or a string+size pair); this allows us to iterate
over all matches in distilled base BTF (Andrii, patch 3)
- Update to use BTF field iterators (Andrii, patches 1, 3 and 8)
- Update tests to cover multiple match and associated error cases
(Eduard, patch 4)
- Rename elf_sections_info to btf_elf_secs, remove use of
libbpf_get_error(), reset btf->owns_base when relocation
succeeds (Andrii, patch 5)
Changes since v4[5]:
- Moved embeddedness, duplicate name checks to relocation time
and record struct/union size for all distilled struct/unions
instead of using forwards. This allows us to carry out
type compatibility checks based on the base BTF we want to
relocate with (Eduard, patches 1, 3)
- Moved to using qsort() instead of qsort_r() as support for
qsort_r() appears to be missing in Android libc (Andrii, patch 3)
- Sorting/searching now incorporates size matching depending
on BTF kind and embeddedness of struct/union (Eduard, Andrii,
patch 3)
- Improved naming of various types during relocation to avoid
confusion (Andrii, patch 3)
- Incorporated Eduard's patch (patch 5) which handles .BTF.base
sections internally in btf_parse_elf(). This makes ELF parsing
work with split BTF, split BTF with a distilled base, split
BTF with a distilled base _and_ base BTF (by relocating) etc.
Having this avoids the need for bpftool changes; it will work
as-is with .BTF.base sections (Eduard, patch 4)
- Updated resolve_btfids to _not_ relocate BTF for modules
where a .BTF.base section is present; in that one case we
do not want to relocate BTF as the .BTF.ids section should
reflect ids in .BTF.base which will later be relocated on
module load (Eduard, Andrii, patch 5)
Changes since v3[6]:
- distill now checks for duplicate-named struct/unions and records
them as a sized struct/union to help identify which of the
multiple base BTF structs/unions it refers to (Eduard, patch 1)
- added test support for multiple name handling (Eduard, patch 2)
- simplified the string mapping when updating split BTF to use
base BTF instead of distilled base. Since the only string
references split BTF can make to base BTF are the names of
the base types, create a string map from distilled string
offset -> base BTF string offset and update string offsets
by visiting all strings in split BTF; this saves having to
do costly searches of base BTF (Eduard, patch 7,10)
- fixed bpftool manpage and indentation issues (Quentin, patch 11)
Also explored Eduard's suggestion of doing an implicit fallback
to checking for .BTF.base section in btf__parse() when it is
called to get base BTF. However while it is doable, it turned
out to be difficult operationally. Since fallback is implicit
we do not know the source of the BTF - was it from .BTF or
.BTF.base? In bpftool, we want to try first standalone BTF,
then split, then split with distilled base. Having a way
to explicitly request .BTF.base via btf__parse_opts() fits
that model better.
Changes since v2[7]:
- submitted patch to use --btf_features in Makefile.btf for pahole
v1.26 and later separately (Andrii). That has landed in bpf-next
now.
- distilled base now encodes ENUM64 as fwd ENUM (size 8), eliminating
the need for support for ENUM64 in btf__add_fwd (patch 1, Andrii)
- moved to distilling only named types, augmenting split BTF with
associated reference types; this simplifies greatly the distilled
base BTF and the mapping operation between distilled and base
BTF when relocating (most of the series changes, Andrii)
- relocation now iterates over base BTF, looking for matches based
on name in distilled BTF. Distilled BTF is pre-sorted by name
(Andrii, patch 8)
- removed most redundant compabitiliby checks aside from struct
size for base types/embedded structs and kind compatibility
(since we only match on name) (Andrii, patch 8)
- btf__parse_opts() now replaces btf_parse() internally in libbpf
(Eduard, patch 3)
Changes since RFC [8]:
- updated terminology; we replace clunky "base reference" BTF with
distilling base BTF into a .BTF.base section. Similarly BTF
reconcilation becomes BTF relocation (Andrii, most patches)
- add distilled base BTF by default for out-of-tree modules
(Alexei, patch 8)
- distill algorithm updated to record size of embedded struct/union
by recording it as a 0-vlen STRUCT/UNION with size preserved
(Andrii, patch 2)
- verify size match on relocation for such STRUCT/UNIONs (Andrii,
patch 9)
- with embedded STRUCT/UNION recording size, we can have bpftool
dump a header representation using .BTF.base + .BTF sections
rather than special-casing and refusing to use "format c" for
that case (patch 5)
- match enum with enum64 and vice versa (Andrii, patch 9)
- ensure that resolve_btfids works with BTF without .BTF.base
section (patch 7)
- update tests to cover embedded types, arrays and function
prototypes (patches 3, 12)
[1] https://lore.kernel.org/bpf/20231112124834.388735-14-alan.maguire@oracle.com/
[2] https://lore.kernel.org/bpf/20240501175035.2476830-1-alan.maguire@oracle.com/
[3] https://lore.kernel.org/bpf/20240517102714.4072080-1-alan.maguire@oracle.com/
[4] https://lore.kernel.org/bpf/20240528122408.3154936-1-alan.maguire@oracle.com/
[5] https://lore.kernel.org/bpf/20240517102246.4070184-1-alan.maguire@oracle.com/
[6] https://lore.kernel.org/bpf/20240510103052.850012-1-alan.maguire@oracle.com/
[7] https://lore.kernel.org/bpf/20240424154806.3417662-1-alan.maguire@oracle.com/
[8] https://lore.kernel.org/bpf/20240322102455.98558-1-alan.maguire@oracle.com/
====================
Link: https://lore.kernel.org/r/20240613095014.357981-1-alan.maguire@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Now that btf_parse_elf() handles .BTF.base section presence,
we need to ensure that resolve_btfids uses .BTF.base when present
rather than the vmlinux base BTF passed in via the -B option.
Detect .BTF.base section presence and unset the base BTF path
to ensure that BTF ELF parsing will do the right thing.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-7-alan.maguire@oracle.com
Update btf_parse_elf() to check if .BTF.base section is present.
The logic is as follows:
if .BTF.base section exists:
distilled_base := btf_new(.BTF.base)
if distilled_base:
btf := btf_new(.BTF, .base_btf=distilled_base)
if base_btf:
btf_relocate(btf, base_btf)
else:
btf := btf_new(.BTF)
return btf
In other words:
- if .BTF.base section exists, load BTF from it and use it as a base
for .BTF load;
- if base_btf is specified and .BTF.base section exist, relocate newly
loaded .BTF against base_btf.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240613095014.357981-6-alan.maguire@oracle.com
Ensure relocated BTF looks as expected; in this case identical to
original split BTF, with a few duplicate anonymous types added to
split BTF by the relocation process. Also add relocation tests
for edge cases like missing type in base BTF and multiple types
of the same name.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-5-alan.maguire@oracle.com
Map distilled base BTF type ids referenced in split BTF and their
references to the base BTF passed in, and if the mapping succeeds,
reparent the split BTF to the base BTF.
Relocation is done by first verifying that distilled base BTF
only consists of named INT, FLOAT, ENUM, FWD, STRUCT and
UNION kinds; then we sort these to speed lookups. Once sorted,
the base BTF is iterated, and for each relevant kind we check
for an equivalent in distilled base BTF. When found, the
mapping from distilled -> base BTF id and string offset is recorded.
In establishing mappings, we need to ensure we check STRUCT/UNION
size when the STRUCT/UNION is embedded in a split BTF STRUCT/UNION,
and when duplicate names exist for the same STRUCT/UNION. Otherwise
size is ignored in matching STRUCT/UNIONs.
Once all mappings are established, we can update type ids
and string offsets in split BTF and reparent it to the new base.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-4-alan.maguire@oracle.com
Test generation of split+distilled base BTF, ensuring that
- named base BTF STRUCTs and UNIONs are represented as 0-vlen sized
STRUCT/UNIONs
- named ENUM[64]s are represented as 0-vlen named ENUM[64]s
- anonymous struct/unions are represented in full in split BTF
- anonymous enums are represented in full in split BTF
- types unreferenced from split BTF are not present in distilled
base BTF
Also test that with vmlinux BTF and split BTF based upon it,
we only represent needed base types referenced from split BTF
in distilled base.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-3-alan.maguire@oracle.com
To support more robust split BTF, adding supplemental context for the
base BTF type ids that split BTF refers to is required. Without such
references, a simple shuffling of base BTF type ids (without any other
significant change) invalidates the split BTF. Here the attempt is made
to store additional context to make split BTF more robust.
This context comes in the form of distilled base BTF providing minimal
information (name and - in some cases - size) for base INTs, FLOATs,
STRUCTs, UNIONs, ENUMs and ENUM64s along with modified split BTF that
points at that base and contains any additional types needed (such as
TYPEDEF, PTR and anonymous STRUCT/UNION declarations). This
information constitutes the minimal BTF representation needed to
disambiguate or remove split BTF references to base BTF. The rules
are as follows:
- INT, FLOAT, FWD are recorded in full.
- if a named base BTF STRUCT or UNION is referred to from split BTF, it
will be encoded as a zero-member sized STRUCT/UNION (preserving
size for later relocation checks). Only base BTF STRUCT/UNIONs
that are either embedded in split BTF STRUCT/UNIONs or that have
multiple STRUCT/UNION instances of the same name will _need_ size
checks at relocation time, but as it is possible a different set of
types will be duplicates in the later to-be-resolved base BTF,
we preserve size information for all named STRUCT/UNIONs.
- if an ENUM[64] is named, a ENUM forward representation (an ENUM
with no values) of the same size is used.
- in all other cases, the type is added to the new split BTF.
Avoiding struct/union/enum/enum64 expansion is important to keep the
distilled base BTF representation to a minimum size.
When successful, new representations of the distilled base BTF and new
split BTF that refers to it are returned. Both need to be freed by the
caller.
So to take a simple example, with split BTF with a type referring
to "struct sk_buff", we will generate distilled base BTF with a
0-member STRUCT sk_buff of the appropriate size, and the split BTF
will refer to it instead.
Tools like pahole can utilize such split BTF to populate the .BTF
section (split BTF) and an additional .BTF.base section. Then
when the split BTF is loaded, the distilled base BTF can be used
to relocate split BTF to reference the current (and possibly changed)
base BTF.
So for example if "struct sk_buff" was id 502 when the split BTF was
originally generated, we can use the distilled base BTF to see that
id 502 refers to a "struct sk_buff" and replace instances of id 502
with the current (relocated) base BTF sk_buff type id.
Distilled base BTF is small; when building a kernel with all modules
using distilled base BTF as a test, overall module size grew by only
5.3Mb total across ~2700 modules.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-2-alan.maguire@oracle.com
Improve arena based tests and add several C and asm tests
with specific pattern.
These tests would have failed without add_const verifier support.
Also add several loop_inside_iter*() tests that are not related to add_const,
but nice to have.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240613013815.953-5-alexei.starovoitov@gmail.com
Compilers can generate the code
r1 = r2
r1 += 0x1
if r2 < 1000 goto ...
use knowledge of r2 range in subsequent r1 operations
So remember constant delta between r2 and r1 and update r1 after 'if' condition.
Unfortunately LLVM still uses this pattern for loops with 'can_loop' construct:
for (i = 0; i < 1000 && can_loop; i++)
The "undo" pass was introduced in LLVM
https://reviews.llvm.org/D121937
to prevent this optimization, but it cannot cover all cases.
Instead of fighting middle end optimizer in BPF backend teach the verifier
about this pattern.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613013815.953-3-alexei.starovoitov@gmail.com
__bpf_skc_lookup() safely handles incorrect values of tuple len,
hence we can allow zero to be passed as tuple len.
This patch alone doesn't make an observable verifier difference.
It's a trivial improvement that might simplify bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613013815.953-2-alexei.starovoitov@gmail.com
Vadim Fedorenko says:
====================
bpf: make trusted args nullable
Current verifier checks for the arg to be nullable after checking for
certain pointer types. It prevents programs to pass NULL to kfunc args
even if they are marked as nullable. This patchset adjusts verifier and
changes bpf crypto kfuncs to allow null for IV parameter which is
optional for some ciphers. Benchmark shows ~4% improvements when there
is no need to initialise 0-sized dynptr.
v3:
- add special selftest for nullable parameters
v2:
- adjust kdoc accordingly
====================
Link: https://lore.kernel.org/r/20240613211817.1551967-1-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add special test to be sure that only __nullable BTF params can be
replaced by NULL. This patch adds fake kfuncs in bpf_testmod to
properly test different params.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-6-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust selftests to use nullable option for state and IV arg.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-4-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some ciphers do not require state and IV buffer, but with current
implementation 0-sized dynptr is always needed. With adjustment to
verifier we can provide NULL instead of 0-sized dynptr. Make crypto
kfuncs ready for this.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-3-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some arguments to kfuncs might be NULL in some cases. But currently it's
not possible to pass NULL to any BTF structures because the check for
the suffix is located after all type checks. Move it to earlier place
to allow nullable args.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-2-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Xu says:
====================
Fixes for kfunc prototype generation
This patchset fixes new warnings and errors that kfunc prototype
generation caused.
====================
Link: https://lore.kernel.org/r/cover.1718295425.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When selftests are built with a new enough clang, the arena selftests
opt-in to use LLVM address_space attribute annotations for arena
pointers.
These annotations are not emitted by kfunc prototype generation. This
causes compilation errors when clang sees conflicting prototypes.
Fix by opting arena selftests out of using generated kfunc prototypes.
Fixes: 770abbb5a2 ("bpftool: Support dumping kfunc prototypes from BTF")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202406131810.c1B8hTm8-lkp@intel.com/
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/fc59a617439ceea9ad8dfbb4786843c2169496ae.1718295425.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add special flag to validate that TC BPF program properly updates
checksum information in skb.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240606145851.229116-1-vadfed@meta.com
Daniel Xu says:
====================
bpf: Support dumping kfunc prototypes from BTF
This patchset enables both detecting as well as dumping compilable
prototypes for kfuncs.
The first commit instructs pahole to DECL_TAG kfuncs when available.
This requires v1.27 which was released on 6/11/24. With it, users will
be able to look at BTF inside vmlinux (or modules) and check if the
kfunc they want is available.
The final commit teaches bpftool how to dump kfunc prototypes. This
is done for developer convenience.
The rest of the commits are fixups to enable selftests to use the
newly dumped kfunc prototypes. With these, selftests will regularly
exercise the newly added codepaths.
Tested with and without the required pahole changes:
* https://github.com/kernel-patches/bpf/pull/7186
* https://github.com/kernel-patches/bpf/pull/7187
=== Changelog ===
From v4:
* Change bpf_session_cookie() return type
* Only fixup used fentry test kfunc prototypes
* Extract out projection detection into shared btf_is_projection_of()
* Fix kernel test robot build warnings about doc comments
From v3:
* Teach selftests to use dumped prototypes
From v2:
* Update Makefile.btf with pahole flag
* More error checking
* Output formatting changes
* Drop already-merged commit
From v1:
* Add __weak annotation
* Use btf_dump for kfunc prototypes
* Update kernel bpf_rdonly_cast() signature
====================
Link: https://lore.kernel.org/r/cover.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch enables dumping kfunc prototypes from bpftool. This is useful
b/c with this patch, end users will no longer have to manually define
kfunc prototypes. For the kernel tree, this also means we can optionally
drop kfunc prototypes from:
tools/testing/selftests/bpf/bpf_kfuncs.h
tools/testing/selftests/bpf/bpf_experimental.h
Example usage:
$ make PAHOLE=/home/dxu/dev/pahole/build/pahole -j30 vmlinux
$ ./tools/bpf/bpftool/bpftool btf dump file ./vmlinux format c | rg "__ksym;" | head -3
extern void cgroup_rstat_updated(struct cgroup *cgrp, int cpu) __weak __ksym;
extern void cgroup_rstat_flush(struct cgroup *cgrp) __weak __ksym;
extern struct bpf_key *bpf_lookup_user_key(u32 serial, u64 flags) __weak __ksym;
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/bf6c08f9263c4bd9d10a717de95199d766a13f61.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The xfrm_info selftest locally defines an aliased type such that folks
with CONFIG_XFRM_INTERFACE=m/n configs can still build the selftests.
See commit aa67961f32 ("selftests/bpf: Allow building bpf tests with CONFIG_XFRM_INTERFACE=[m|n]").
Thus, it is simpler if this selftest opts out of using enerated kfunc
prototypes. The preprocessor macro this commit uses will be introduced
in the final commit.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/afe0bb1c50487f52542cdd5230c4aef9e36ce250.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf-nf selftests play various games with aliased types such that
folks with CONFIG_NF_CONNTRACK=m/n configs can still build the
selftests. See commits:
1058b6a78d ("selftests/bpf: Do not fail build if CONFIG_NF_CONNTRACK=m/n")
92afc5329a ("selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m")
Thus, it is simpler if these selftests opt out of using generated kfunc
prototypes. The preprocessor macro this commit uses will be introduced
in the final commit.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/044a5b10cb3abd0d71cb1c818ee0bfc4a2239332.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, kfunc declarations in bpf_kfuncs.h (and others) used "user
facing" types for kfuncs prototypes while the actual kfunc definitions
used "kernel facing" types. More specifically: bpf_dynptr vs
bpf_dynptr_kern, __sk_buff vs sk_buff, and xdp_md vs xdp_buff.
It wasn't an issue before, as the verifier allows aliased types.
However, since we are now generating kfunc prototypes in vmlinux.h (in
addition to keeping bpf_kfuncs.h around), this conflict creates
compilation errors.
Fix this conflict by using "user facing" types in kfunc definitions.
This results in more casts, but otherwise has no additional runtime
cost.
Note, similar to 5b268d1ebc ("bpf: Have bpf_rdonly_cast() take a const
pointer"), we also make kfuncs take const arguments where appropriate in
order to make the kfunc more permissive.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/b58346a63a0e66bc9b7504da751b526b0b189a67.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, if a kfunc accepts a projection type as an argument (eg
struct __sk_buff *), the caller must exactly provide exactly the same
type with provable provenance.
However in practice, kfuncs that accept projection types _must_ cast to
the underlying type before use b/c projection type layouts are
completely made up. Thus, it is ok to relax the verifier rules around
implicit conversions.
We will use this functionality in the next commit when we align kfuncs
to user-facing types.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/e2c025cb09ccfd4af1ec9e18284dc3cecff7514d.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We will soon be generating kfunc prototypes from BTF. As part of that,
we need to align the manual signatures in bpf_kfuncs.h with the actual
kfunc definitions. There is currently a conflicting signature for
bpf_session_cookie() w.r.t. return type.
The original intent was to return long * and not __u64 *. You can see
evidence of that intent in a3a5113393 ("selftests/bpf: Add kprobe
session cookie test").
Fix conflict by changing kfunc definition.
Fixes: 5c919acef8 ("bpf: Add support for kprobe session cookie")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/7043e1c251ab33151d6e3830f8ea1902ed2604ac.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The prototype in progs/map_percpu_stats.c is not in line with how the
actual kfuncs are defined in kernel/bpf/map_iter.c. This causes
compilation errors when kfunc prototypes are generated from BTF.
Fix by aligning with actual kfunc definitions.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/0497e11a71472dcb71ada7c90ad691523ae87c3b.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The prototype in progs/nested_trust_common.h is not in line with how the
actual kfuncs are defined in kernel/bpf/cpumask.c. This causes compilation
errors when kfunc prototypes are generated from BTF.
Fix by aligning with actual kfunc definitions.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/437936a4e554b02e04566dd6e3f0a5d08370cc8c.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some prototypes in progs/get_func_ip_test.c were not in line with how the
actual kfuncs are defined in net/bpf/test_run.c. This causes compilation
errors when kfunc prototypes are generated from BTF.
Fix by aligning with actual kfunc definitions.
Also remove two unused prototypes.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/1e68870e7626b7b9c6420e65076b307fc404a2f0.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When CONFIG_NETKIT=y,
bpftool-cgroup shows error even if the cgroup's path is correct:
$ bpftool cgroup tree /sys/fs/cgroup
CgroupPath
ID AttachType AttachFlags Name
Error: can't query bpf programs attached to /sys/fs/cgroup: No such device or address
>From strace and kernel tracing, I found netkit returned ENXIO and this command failed.
I think this AttachType(BPF_NETKIT_PRIMARY) is not relevant to cgroup.
bpftool-cgroup should query just only cgroup-related attach types.
v2->v3:
- removed an unnecessary check
v1->v2:
- used an array of cgroup attach types
Signed-off-by: Kenta Tada <tadakentaso@gmail.com>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20240607111704.6716-1-tadakentaso@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that.
On the contrary, when the driver applies affinities by itself, it breaks
the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. ice reconfigures VSIs at runtime due to a MIB change
(ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the
affinity in ice_vsi_req_irq_msix().
3. ice has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
I am not sure if updating the affinity hints is at all useful, because
irqbalance ignores them since 2016 ([1]), but at least it's harmless.
This ice change is similar to i40e commit d34c54d173 ("i40e: Use
irq_update_affinity_hint()").
[1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfdd
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-3-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ice_ptp_cfg_clkout(), the ice driver needs to calculate the nearest next
second of a current time value specified in nanoseconds. It implements this
using div64_u64, because the time value is a u64. It could use div_u64
since NSEC_PER_SEC is smaller than 32-bits.
Ideally this would be implemented directly with roundup(), but that can't
work on all platforms due to a division which requires using the specific
macros and functions due to platform restrictions, and to ensure that the
most appropriate and fast instructions are used.
The kernel doesn't currently provide any 64-bit equivalents for doing
roundup. Attempting to use roundup() on a 32-bit platform will result in a
link failure due to not having a direct 64-bit division.
The closest equivalent for this is DIV64_U64_ROUND_UP, which does a
division always rounding up. However, this only computes the division, and
forces use of the div64_u64 in cases where the divisor is a 32bit value and
could make use of div_u64.
Introduce DIV_U64_ROUND_UP based on div_u64, and then use it to implement
roundup_u64 which takes a u64 input value and a u32 rounding value.
The name roundup_u64 matches the naming scheme of div_u64, and future
patches could implement roundup64_u64 if they need to round by a multiple
that is greater than 32-bits.
Replace the logic in ice_ptp.c which does this equivalent with the newly
added roundup_u64.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-2-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcpci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcmulti.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcsusb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/avmfritz.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/speedfax.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNinfineon.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/w6692.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/netjet.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNipac.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNisar.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_dsp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/l1oip.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-isdn-v1-1-81fb7001bc3a@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmIsRAAKCRDbK58LschI
g4SSAP0bkl6rPMn7zp1h+/l7hlvpp2aVOmasBTe8hIhAGUbluwD/TGq4sNsGgXFI
i4tUtFRhw8pOjy2guy6526qyJvBs8wY=
=WMhY
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-06-06
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).
The main changes are:
1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.
2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.
3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.
4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.
5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.
6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.
7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.
8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.
9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.
10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.
11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.
12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================
Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have two
conflicts this time:
CONFLICT (content): Merge conflict in net/mac80211/cfg.c
CONFLICT (content): Merge conflict in drivers/net/wireless/microchip/wilc1000/netdev.c
Here are Stephen's resolutions for them:
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au/https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* Enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZi07URHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu3/QgAo7jyKgvpwMaNIVRLyfYCo0r3Q9wb7QPd
QeRNsftYxlWpPTJ4+Y95aZupy91Ay+RaEQXbbtl7PMIiyQrs7wb4V4Iqzedkws3t
DZsR5BitH+1BIGY0Omo0fiSB5HlWEwZGUj6inqlgKHpBtdIVTANSMjuwkdoMAV5y
ZU57axIGToySvDbRlhJQW833Nnh4KnaseA+TtyfXSaBVerzbshkjBr0d9pMBMiH9
irMQW5CW+7fbxp3OCNsKxX4eG6MFGmm/uP1hFmeYQi2qzUE4SddHMeV4I6oNKOrH
vFB+ZVmYvOjJUYsNhlCUe6Vy+EKwvmfiDWwE1egelEkgozCixJXAAQ==
=QT4C
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing DSA user interface conduit while the user interface is up,
DSA exhibits different behavior in comparison to when the interface is
down. This different behavior concerns the primary unicast MAC address
stored in the port standalone FDB and in the conduit device UC database.
If we put a switch port down while changing the conduit with
ip link set sw0p0 down
ip link set sw0p0 type dsa conduit conduit1
ip link set sw0p0 up
we delete the address in dsa_user_close() and install the (possibly
different) address in dsa_user_open().
But when changing the conduit on the fly, the old address is not
deleted and the new one is not installed.
Since we explicitly want to support live-changing the conduit, uninstall
the old address before calling dsa_port_assign_conduit() and install the
(possibly different) new address after the call.
Because conduit change might also trigger address change (the user
interface is supposed to inherit the conduit interface MAC address if no
address is defined in hardware (dp->mac is a zero address)), move the
eth_hw_addr_inherit() call from dsa_user_change_conduit() to
dsa_port_change_conduit(), just before installing the new address.
Although this is in theory a flaw in DSA core, it needs not be
backported, since there is currently no DSA driver that can be affected
by this. The only DSA driver that supports changing conduit is felix,
and, as explained by Vladimir Oltean [1]:
There are 2 reasons why with felix the bug does not manifest itself.
First is because both the 'ocelot' and the alternate 'ocelot-8021q'
tagging protocols have the 'promisc_on_conduit = true' flag. So the
unicast address doesn't have to be in the conduit's RX filter -
neither the old or the new conduit.
Second, dsa_user_host_uc_install() theoretically leaves behind host
FDB entries installed towards the wrong (old) CPU port. But in
felix_fdb_add(), we treat any FDB entry requested towards any CPU port
as if it was a multicast FDB entry programmed towards _all_ CPU ports.
For that reason, it is installed towards the port mask of the PGID_CPU
port group ID:
if (dsa_port_is_cpu(dp))
port = PGID_CPU;
Therefore no Fixes tag for this change.
[1] https://lore.kernel.org/netdev/20240507201827.47suw4fwcjrbungy@skbuf/
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sequence
if (dsa_switch_supports_uc_filtering(ds))
dsa_port_standalone_host_fdb_add(dp, addr, 0);
if (!ether_addr_equal(addr, conduit->dev_addr))
dev_uc_add(conduit, addr);
is executed both in dsa_user_open() and dsa_user_set_mac_addr().
Its reverse is executed both in dsa_user_close() and
dsa_user_set_mac_addr().
Refactor these sequences into new functions dsa_user_host_uc_install()
and dsa_user_host_uc_uninstall().
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
