1
Commit Graph

143431 Commits

Author SHA1 Message Date
Paul Mundt
84972ec0c2 sh: pci: Rename SH7751 platform ops files to fixups.
None of these contain pci_ops, only IRQ routing bits, rename them
accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:17:10 +09:00
Paul Mundt
757e3c16f8 sh: pci: Rewrite SH7751 PCI support to follow SH7780.
This follows the similar sort of scheme that the refactored SH7780 code
uses, using a 64MB CS3 mapping to handle the window0 case, and simply
discarding window1. This vastly simplifies the code, and allows most of
the board-specific setup to go die.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:11:07 +09:00
Paul Mundt
a5b0804712 sh: pci: Rename ops-cayman -> fixups-cayman.
Now that ops-cayman.c only contains IRQ routing fixups, rename it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 20:41:45 +09:00
Paul Mundt
48e4237d96 sh: pci: Convert the SH-5 code over to the new interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 20:40:48 +09:00
Paul Mundt
3444f5ec49 sh: pci: Tidy up the dreamcast PCI support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 20:22:05 +09:00
Paul Mundt
0db38cea69 sh: pci: Kill off legacy ide quirks.
These fixups seem to have bitrotted a bit since their introduction in the
2.4 days. As we never had much use for them in the first place, and
nothing is using them any more, kill them off the rest of the way.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:54:47 +09:00
Paul Mundt
0e75148108 sh: pci: Consolidate pcibios_setup() in pci-lib.
This wasn't really being used for anything useful, so just stub it in
pci-lib.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:48:48 +09:00
Paul Mundt
c563bf0965 sh: pci: Kill off dead references to is_pci_ioaddr and friends.
Some old boards are still using this in their I/O routines, kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:39:57 +09:00
Paul Mundt
d556fcc101 sh: pci: Flag the dreamcast BBA as IORESOURCE_PCI_FIXED.
This isn't a real BAR, so prevent any attempts to move it, as we don't
wish to encourage a bus luck by overzealous PCI initialization code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:31:20 +09:00
Paul Mundt
bb3396477b sh: pci: Kill off superfluous lboxre2 pci fixups.
This is a verbatim copy of the r2d one, use that instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:26:45 +09:00
Paul Mundt
5ba7205fc4 sh: pci: Kill off the now unused hose->io_base.
Nothing is using this any more, so kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:00:32 +09:00
Paul Mundt
3f8daeacd7 sh: pci: Consolidate the remaining common bits.
This moves the remaining common bits in to pci-lib. Thereby reducing
pci.c/pci-new.c to simple bus fixups and controller registration.

As more platforms are moved over, the old code will disappear completely
and the pci-new bits will be rolled in to pci-lib, eventually replacing
pci.c completely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:53:41 +09:00
Paul Mundt
5160d3f782 sh: pci: Consolidate bus<->resource mapping in pci-lib.
Now that the io and mem offsets are tracked accordingly, the pci-new
version of the bus<->resource mappers can be used generically. This
moves them in to pci-lib.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:47:21 +09:00
Paul Mundt
09cfeb133e sh: pci: Track io and mem_offset per-channel.
This implements a per-hose offset for I/O and mem resources.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:42:00 +09:00
Paul Mundt
e79066a659 sh: pci: New-style controller registration.
This moves off of the board_pci_channels[] approach for bus registration
and over to a cleaner register_pci_controller(), all derived from the
MIPS code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:29:22 +09:00
Paul Mundt
99f95f1178 sh: pci: Rework fixed region checks in ioremap().
Not all PCI channels have non-translatable memory windows, this is a
special property of the on-chip PCIC with its 0xfd00... mapping, handle
this explicitly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 18:24:57 +09:00
Paul Mundt
0bb34a6bf1 sh: pci: Consolidate pci_iomap() and use the generic I/O base.
This consolidates the pci_iomap() definitions and reworks how the I/O
port base is handled. PCI channels can register their own I/O map base,
or if none is provided, the system-wide generic I/O base is used instead.

Functionally nothing changes, while this allows us to kill off lots of
I/O address special casing and lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 16:38:00 +09:00
Paul Mundt
394b6d2fe6 sh: pci: Kill off unused pcibios_fixup().
This is left over cruft that hasn't been used by anything in a long time,
kill off bits that weren't purged previously.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 16:18:46 +09:00
Paul Mundt
a3c0e0d003 sh: pci: Consolidate pcibios_align_resource() definitions.
This introduces a saner pcibios_align_resource() that can be used
regardless of whether pci-auto or pci-new are being used, and
consolidates it in pci-lib.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 16:14:29 +09:00
Paul Mundt
9833385131 sh: pci: HAVE_PCI_MMAP support.
Derived from the MIPS version, now uses pgprot_noncached().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 15:51:45 +09:00
Paul Mundt
4c5107e445 sh: pci: Split out new-style PCI core.
This splits off a 'pci-new.c' which is aimed at gradually replacing the
pci-auto backend and the arch/sh/drivers/pci/pci.c core respectively.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 15:43:36 +09:00
Paul Mundt
9ade1217c9 sh: pci: Drop asm-generic/pci.h, so we can use our own fixups.
The new PCI code wants its own bus<->resource mappings instead of the
generic equivalents, so drop the asm-generic include in preparation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 15:38:25 +09:00
Paul Mundt
62c7ae87cb sh: pci: Start unifying the SH7780 PCIC initialization.
This starts moving out the common initialization bits from the various
fixup paths in to the shared init path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 20:37:16 +09:00
Paul Mundt
a6d377b696 sh: pci: Consolidate SH7780 PCIC IRQ routing.
Now that the platform code is a bit leaner, we can start consolidating
the various IRQ routing implementations. There are effectively only 2
variants, and the others can use those directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 20:11:44 +09:00
Paul Mundt
4c7a47de89 sh: pci: Kill off platform-specific multi-window mappings.
Commit 68b42d1b54 ("sh: sh7785lcr: Map
whole PCI address space.") changed around the semantics of how various
chip-selects are made accessible to PCI. Now that there is a single
large mapping covering from CS0-CS6, there is no longer any need to
do multi-window mapping. Subsequently, all of the differing
implementations can be consolidated in to pci-sh7780.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 17:21:36 +09:00
Paul Mundt
ab1363a892 sh: pci: Consolidate PCI I/O and mem window definitions for SH7780.
This consolidates all of the PCI I/O and memory window definitions across
the pci-sh7780 users in pci-sh7780 itself. No functional changes, in that
every platform had exactly the same implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 17:07:47 +09:00
Paul Mundt
f1dcab7566 sh: pci: Set the I/O port base to the SH7780 I/O window default.
Presently the I/O port base isn't being set anywhere, which allows things
like generic_inl() to blow up. Fix this up to point at the PCI IO window.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 17:00:27 +09:00
Paul Mundt
c66c1d79a9 sh: pci: Set pci_cache_line_size on SH7780 via the PCICLS register.
The SH7780 PCIC contains a read-only cache line size register that we can
derive pci_cache_line_size from. So, make sure that the software idea of
the cache line size actually matches the host controller's idea.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 16:38:00 +09:00
Paul Mundt
ab78cbcf68 sh: pci: Use the proper write size for class/sub-class code.
Don't use pci_write_reg() for these, as it defaults to 32-bit. Rather
than using the helper, use __raw_writeb() directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 15:08:01 +09:00
Paul Mundt
4e7b7fdb12 sh: pci: Rework SH7780 host controller detection.
This reworks how the host controller is probed, and makes it a bit more
verbose in the event a new type of controller is detected. Additionally,
we also log the revision information.

This now uses the proper access sizes for the vendor/device registers,
rather than relying on a larger access that encapsulated both of them.
Not all devices support 32-bit read cycles for these registers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 15:05:19 +09:00
Paul Mundt
0bbc9bc318 sh: pci: Set class/sub-class code correctly for SH7780 PCIC.
The SH7780 PCI host controller implements a configuration header that
requires a fair bit of hand-holding to initialize properly. By default
it appears as a pre-2.0 host controller given the zeroed out class code,
so fix this up properly.

Some boards that happened to be using the R7780RP version of the PCIC
fixups had set this correctly, but this belongs in the standard
initialization, and is by no means board specific.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 14:09:09 +09:00
Paul Mundt
7e4ba0d77c sh: pci: Prefer P1SEG over P1SEGADDR for CONFIG_CMD.
P1SEGADDR is obsolete and will be killed off completely in the future,
so transition off of it and reference P1SEG explicitly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 14:07:57 +09:00
Paul Mundt
b627b4ed3d sh: pci: Move se7780 INTC fixups out of pci-sh7780.c.
These fixups belong in the board INTC setup code, not in the middle of
pci-sh7780.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 13:00:18 +09:00
Paul Mundt
84971bb401 sh: pci: Kill off useless debugging printk() in pci-sh7780 init.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 12:44:25 +09:00
Paul Mundt
0232ba9ce0 sh: pci: Kill off unused SH4_PCIC_NO_RESET code.
Nothing ended up using this anymore, so just kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 18:01:31 +09:00
Paul Mundt
f1a9ba8f15 sh: pci: drop duplicate PCIC fixups for SE7780 and SH7785LCR.
SE7780 has the same PCIC fixup as SDK7780, and SH7785LCR the same
as R7780RP. Switch to using those, and drop the duplicate code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:15 +09:00
Paul Mundt
3aabce8d3d sh: sh7785lcr: Update for recent PCI changes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:15 +09:00
Paul Mundt
10591578c8 sh: drop duplicate symbol export on dreamcast and sh7785lcr.
With board_pci_channels now being exported in a single place, update the
boards that duplicated the export.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:15 +09:00
Magnus Damm
aa5d3ff99c sh: export board_pci_channels in one place
Instead of sometimes exporting board_pci_channels[] in the board specific
code just export it in one place.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:14 +09:00
Magnus Damm
8ce0143b11 sh: pci io port base address code
Adds a __get_pci_io_base() function which is used to match a port range
against struct pci_channel. This allows us to detect if a port range is
assigned to pci or happens to be legacy port io. While at it, remove unused
cpu-specific cruft.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:14 +09:00
Magnus Damm
ef339f241b sh: pci memory range checking code
This patch changes the code to use __is_pci_memory() instead of
is_pci_memaddr(). __is_pci_memory() loops through all the pci
channels on the system to match memory windows.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:14 +09:00
Magnus Damm
ef53fdeb7e sh: add io_base member to pci_channel
Store the io window base address in struct pci_channel and use that one
instead of SH77xx_PCI_IO_BASE.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:13 +09:00
Magnus Damm
e4c6a3604e sh: add reg_base member to pci_channel
Store the base address of the pci host controller registers in struct
pci_channel and use the address in pci_read_reg() and pci_write_reg().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:13 +09:00
Magnus Damm
b6706ef10f sh: hook in struct pci_channel in sysdata
Store a struct pci_channel pointer in bus->sysdata. This makes whatever
struct pci_channel assigned to a bus available for sh4_pci_read() and
sh4_pci_write(). We also modify PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM to
use bus->sysdata - this to gives us support for multiple pci channels.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:13 +09:00
Magnus Damm
710fa3c811 sh: avoid using PCIBIOS_MIN_xxx
Replaces PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM with direct struct
pci_channel access. This allows us to have more than one pci
channel.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:13 +09:00
Magnus Damm
d0e3db40e2 sh: add init member to pci_channel data
This patch adds an init callback to struct pci_channel and makes sure
it is initialized properly. Code is added to call this init function
from pcibios_init(). Return values are adjusted and a warning is is
printed if init fails.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:12 +09:00
Magnus Damm
b8b47bfbe4 sh: pass along struct pci_channel
These patches rework the pci code for the sh architecture.

Currently each board implements some kind of ioport to address mapping.
Some boards use generic_io_base others try passing addresses as io ports.
This is the first set of patches that try to unify the pci code as much
as possible to avoid duplicated code. This will in the end lead to fewer
lines board specific code and more generic code.

This patch makes sure a struct pci_channel pointer is passed along to
various pci functions such as pci_read_reg(), pci_write_reg(),
pci_fixup_pcic(), sh7751_pcic_init() and sh7780_pcic_init().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 16:00:12 +09:00
Linus Torvalds
3ee8da87ba Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix the cmd cache keys for amp verbs
  ALSA: add missing definitions(letters) to HD-Audio.txt
  ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883
  [ALSA] intel8x0: add one retry to the ac97_clock measurement routine
  [ALSA] intel8x0: fix wrong conditions in ac97_clock measure routine
  ALSA: hda - Avoid call of snd_jack_report at release
  ALSA: add private_data to struct snd_jack
  ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathes
  ALSA: snd-usb-caiaq: clean up header includes
  ALSA: sound/pci: use memdup_user()
  ALSA: sound/usb: use memdup_user()
  ALSA: sound/isa: use memdup_user()
  ALSA: sound/core: use memdup_user()
  [ALSA] intel8x0: do not use zero value from PICB register
  [ALSA] intel8x0: an attempt to make ac97_clock measurement more reliable
  [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies
  [ALSA] hda_intel: fix unexpected ring buffer positions
  ASoC: Disable S3C64xx support in Kconfig
  ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.h
2009-04-15 09:11:11 -07:00
Linus Torvalds
a2c252ebde Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Use DEFINE_SPINLOCK
  GFS2: cleanup file_operations mess
  GFS2: Move umount flush rwsem
  GFS2: Fix symlink creation race
  GFS2: Make quotad's waiting interruptible
2009-04-15 09:04:12 -07:00
Linus Torvalds
23da64b471 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (28 commits)
  cfq-iosched: add close cooperator code
  cfq-iosched: log responsible 'cfqq' in idle timer arm
  cfq-iosched: tweak kick logic a bit more
  cfq-iosched: no need to save interrupts in cfq_kick_queue()
  brd: fix cacheflushing
  brd: support barriers
  swap: Remove code handling bio_alloc failure with __GFP_WAIT
  gfs2: Remove code handling bio_alloc failure with __GFP_WAIT
  ext4: Remove code handling bio_alloc failure with __GFP_WAIT
  dio: Remove code handling bio_alloc failure with __GFP_WAIT
  block: Remove code handling bio_alloc failure with __GFP_WAIT
  bio: add documentation to bio_alloc()
  splice: add helpers for locking pipe inode
  splice: remove generic_file_splice_write_nolock()
  ocfs2: fix i_mutex locking in ocfs2_splice_to_file()
  splice: fix i_mutex locking in generic_splice_write()
  splice: remove i_mutex locking in splice_from_pipe()
  splice: split up __splice_from_pipe()
  block: fix SG_IO to return a proper error value
  cfq-iosched: don't delay queue kick for a merged request
  ...
2009-04-15 09:03:47 -07:00