__alloc_contig_migrate_range calls migrate_pages with wrong argument
for migrate_mode. Fix it.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
This patch adds support for CMA to dma-mapping subsystem for ARM
architecture. By default a global CMA area is used, but specific devices
are allowed to have their private memory areas if required (they can be
created with dma_declare_contiguous() function during board
initialisation).
Contiguous memory areas reserved for DMA are remapped with 2-level page
tables on boot. Once a buffer is requested, a low memory kernel mapping
is updated to to match requested memory access type.
GFP_ATOMIC allocations are performed from special pool which is created
early during boot. This way remapping page attributes is not needed on
allocation time.
CMA has been enabled unconditionally for ARMv6+ systems.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This patch adds support for CMA to dma-mapping subsystem for x86
architecture that uses common pci-dma/pci-nommu implementation. This
allows to test CMA on KVM/QEMU and a lot of common x86 boxes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The Contiguous Memory Allocator is a set of helper functions for DMA
mapping framework that improves allocations of contiguous memory chunks.
CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type
and gives back to the system. Kernel is allowed to allocate only movable
pages within CMA's managed memory so that it can be used for example for
page cache when DMA mapping do not use it. On
dma_alloc_from_contiguous() request such pages are migrated out of CMA
area to free required contiguous block and fulfill the request. This
allows to allocate large contiguous chunks of memory at any time
assuming that there is enough free memory available in the system.
This code is heavily based on earlier works by Michal Nazarewicz.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
alloc_contig_range() performs memory allocation so it also should keep
track on keeping the correct level of memory watermarks. This commit adds
a call to *_slowpath style reclaim to grab enough pages to make sure that
the final collection of contiguous pages from freelists will not starve
the system.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Michal Nazarewicz <mina86@mina86.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This patch extracts common reclaim code from __alloc_pages_direct_reclaim()
function to separate function: __perform_reclaim() which can be later used
by alloc_contig_range().
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
There is a race between the min_free_kbytes sysctl, memory hotplug
and transparent hugepage support enablement. Memory hotplug uses a
zonelists_mutex to avoid a race when building zonelists. Reuse it to
serialise watermark updates.
[a.p.zijlstra@chello.nl: Older patch fixed the race with spinlock]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This commit changes various functions that change pages and
pageblocks migrate type between MIGRATE_ISOLATE and
MIGRATE_MOVABLE in such a way as to allow to work with
MIGRATE_CMA migrate type.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
The MIGRATE_CMA migration type has two main characteristics:
(i) only movable pages can be allocated from MIGRATE_CMA
pageblocks and (ii) page allocator will never change migration
type of MIGRATE_CMA pageblocks.
This guarantees (to some degree) that page in a MIGRATE_CMA page
block can always be migrated somewhere else (unless there's no
memory left in the system).
It is designed to be used for allocating big chunks (eg. 10MiB)
of physically contiguous memory. Once driver requests
contiguous memory, pages from MIGRATE_CMA pageblocks may be
migrated away to create a contiguous block.
To minimise number of migrations, MIGRATE_CMA migration type
is the last type tried when page allocator falls back to other
migration types when requested.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This commit adds a row for MIGRATE_ISOLATE type to the fallbacks array
which was missing from it. It also, changes the array traversal logic
a little making MIGRATE_RESERVE an end marker. The letter change,
removes the implicit MIGRATE_UNMOVABLE from the end of each row which
was read by __rmqueue_fallback() function.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This commit adds the alloc_contig_range() function which tries
to allocate given range of pages. It tries to migrate all
already allocated pages that fall in the range thus freeing them.
Once all pages in the range are freed they are removed from the
buddy system thus allocated for the caller to use.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This commit exports some of the functions from compaction.c file
outside of it adding their declaration into internal.h header
file so that other mm related code can use them.
This forced compaction.c to always be compiled (as opposed to being
compiled only if CONFIG_COMPACTION is defined) but as to avoid
introducing code that user did not ask for, part of the compaction.c
is now wrapped in on #ifdef.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This commit introduces isolate_freepages_range() function which
generalises isolate_freepages_block() so that it can be used on
arbitrary PFN ranges.
isolate_freepages_block() is left with only minor changes.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This commit creates a map_pages() function which map pages freed
using split_free_pages(). This merely moves some code from
isolate_freepages() so that it can be reused in other places.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
This commit introduces isolate_migratepages_range() function which
extracts functionality from isolate_migratepages() so that it can be
used on arbitrary PFN ranges.
isolate_migratepages() function is implemented as a simple wrapper
around isolate_migratepages_range().
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJPt7wpAAoJEDeqqVYsXL0MgZUIAL6SMaBmgCZxZEb1pCymrn3c
DLESwPGoA5lPs62ojZ1C8jhZhmEA7nfv+iDDCA/YYMPbyctD3ZH7moHgEJCHyvqJ
9SByxT3uuYU4fxfQ1xxUQOe96gpuS9zBhvUYrfP6+/hdZakBAPqCWxVTqz1eET90
2V09EBGiiTXwtFt9KZ640Tg1p+MBM8tI/lVaq8DCU4Sj99YNV9ZC26j6UszyI/NC
K6doZjQ7nfCG/Ul88MwCH/akqCqupscwty1iXvuFTExVF5jfuCmMN2aaIShDlBPE
ygAkc3j611FDcZXMnNbwUsD/jduR4V7FGQ2yg6U0D/IYZ+07aYC/51qksOu+amY=
=KV0L
-----END PGP SIGNATURE-----
Merge tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Pull PA-RISC fixes from James Bottomley:
"This is a set of three bug fixes that gets parisc running again on
systems with PA1.1 processors.
Two fix regressions introduced in 2.6.39 and one fixes a prefetch bug
that only affects PA7300LC processors. We also have another pending
fix to do with the sectional arrangement of vmlinux.lds, but there's a
query on it during testing on one particular system type, so I'll hold
off sending it in for now."
* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
[PARISC] fix panic on prefetch(NULL) on PA7300LC
[PARISC] fix crash in flush_icache_page_asm on PA1.1
[PARISC] fix PA1.1 oops on boot
Pull x86 linker bug workarounds from Peter Anvin.
GNU ld-2.22.52.0.[12] (*) has an unfortunate bug where it incorrectly
turns certain relocation entries absolute. Section-relative symbols
that are part of otherwise empty sections are silently changed them to
absolute. We rely on section-relative symbols staying section-relative,
and actually have several sections in the linker script solely for this
purpose.
See for example
http://sourceware.org/bugzilla/show_bug.cgi?id=14052
We could just black-list the buggy linker, but it appears that it got
shipped in at least F17, and possibly other distros too, so it's sadly
not some rare unusual case.
This backports the workaround from the x86/trampoline branch, and as
Peter says: "This is not a minimal fix, not at all, but it is a tested
code base."
* 'x86/ld-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, relocs: When printing an error, say relative or absolute
x86, relocs: Workaround for binutils 2.22.52.0.1 section bug
x86, realmode: 16-bit real-mode code support for relocs tool
(*) That's a manly release numbering system. Stupid, sure. But manly.
Pull block layer fixes from Jens Axboe:
"A few small, but important fixes. Most of them are marked for stable
as well
- Fix failure to release a semaphore on error path in mtip32xx.
- Fix crashable condition in bio_get_nr_vecs().
- Don't mark end-of-disk buffers as mapped, limit it to i_size.
- Fix for build problem with CONFIG_BLOCK=n on arm at least.
- Fix for a buffer overlow on UUID partition printing.
- Trivial removal of unused variables in dac960."
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix buffer overflow when printing partition UUIDs
Fix blkdev.h build errors when BLOCK=n
bio allocation failure due to bio_get_nr_vecs()
block: don't mark buffers beyond end of disk as mapped
mtip32xx: release the semaphore on an error path
dac960: Remove unused variables from DAC960_CreateProcEntries()
Pull one more networking bug-fix from David Miller:
"One last straggler.
Eric Dumazet's pktgen unload oops fix was not entirely complete, but
all the cases should be handled properly now.... fingers crossed."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
pktgen: fix module unload for good
Occasionally, testing memcg's move_charge_at_immigrate on rc7 shows
a flurry of hundreds of warnings at kernel/res_counter.c:96, where
res_counter_uncharge_locked() does WARN_ON(counter->usage < val).
The first trace of each flurry implicates __mem_cgroup_cancel_charge()
of mc.precharge, and an audit of mc.precharge handling points to
mem_cgroup_move_charge_pte_range()'s THP handling in commit 12724850e8
("memcg: avoid THP split in task migration").
Checking !mc.precharge is good everywhere else, when a single page is to
be charged; but here the "mc.precharge -= HPAGE_PMD_NR" likely to
follow, is liable to result in underflow (a lot can change since the
precharge was estimated).
Simply check against HPAGE_PMD_NR: there's probably a better
alternative, trying precharge for more, splitting if unsuccessful; but
this one-liner is safer for now - no kernel/res_counter.c:96 warnings
seen in 26 hours.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the relocs tool throws an error, let the error message say if it
is an absolute or relative symbol. This should make it a lot more
clear what action the programmer needs to take and should help us find
the reason if additional symbol bugs show up.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
GNU ld 2.22.52.0.1 has a bug that it blindly changes symbols from
section-relative to absolute if they are in a section of zero length.
This turns the symbols __init_begin and __init_end into absolute
symbols. Let the relocs program know that those should be treated as
relative symbols.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
A new option is added to the relocs tool called '--realmode'.
This option causes the generation of 16-bit segment relocations
and 32-bit linear relocations for the real-mode code. When
the real-mode code is moved to the low-memory during kernel
initialization, these relocation entries can be used to
relocate the code properly.
In the assembly code 16-bit segment relocations must be relative
to the 'real_mode_seg' absolute symbol. Linear relocations must be
relative to a symbol prefixed with 'pa_'.
16-bit segment relocation is used to load cs:ip in 16-bit code.
Linear relocations are used in the 32-bit code for relocatable
data references. They are declared in the linker script of the
real-mode code.
The relocs tool is moved to arch/x86/tools/relocs.c, and added new
target archscripts that can be used to build scripts needed building
an architecture. be compiled before building the arch/x86 tree.
[ hpa: accelerating this because it detects invalid absolute
relocations, a serious bug in binutils 2.22.52.0.x which currently
produces bad kernels. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
When the thin pool target clears the discard_passdown parameter
internally, it incorrectly changes the table line reported to userspace.
This breaks dumb string comparisons on these table lines in generic
userspace device-mapper library code and leads to tables being reloaded
repeatedly when nothing is actually meant to be changing.
This patch corrects this by no longer changing the table line when
discard passdown was disabled.
We can still tell when discard passdown is overridden by looking for the
message "Discard unsupported by data device (sdX): Disabling discard passdown."
This automatic detection is also moved from the 'load' to the 'resume'
so that it is re-evaluated should the properties of underlying devices
change.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Without this patch, recovery will crash
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=s7vy
-----END PGP SIGNATURE-----
Merge tag 'md-3.4-fixes' of git://neil.brown.name/md
Pull one more md bugfix from NeilBrown:
"Fix bug in recent fix to RAID10.
Without this patch, recovery will crash"
* tag 'md-3.4-fixes' of git://neil.brown.name/md:
md/raid10: fix transcription error in calc_sectors conversion.
Pull tile tree bugfix from Chris Metcalf:
"This fixes a security vulnerability (and correctness bug) in tilegx"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tilegx: enable SYSCALL_WRAPPERS support
The old code was
sector_div(stride, fc);
the new code was
sector_dir(size, conf->near_copies);
'size' is right (the stride various wasn't really needed), but
'fc' means 'far_copies', and that is an important difference.
Signed-off-by: NeilBrown <neilb@suse.de>
Merge misc fixes from Andrew Morton.
* emailed from Andrew Morton <akpm@linux-foundation.org>: (4 patches)
frv: delete incorrect task prototypes causing compile fail
slub: missing test for partial pages flush work in flush_all()
fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entries
drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01
Instead of doing the i_mode calculations at proc_fd_instantiate() time,
move them into tid_fd_revalidate(), which is where the other inode state
(notably uid/gid information) is updated too.
Otherwise we'll end up with stale i_mode information if an fd is re-used
while the dentry still hangs around. Not that anything really *cares*
(symlink permissions don't really matter), but Tetsuo Handa noticed that
the owner read/write bits don't always match the state of the
readability of the file descriptor, and we _used_ to get this right a
long time ago in a galaxy far, far away.
Besides, aside from fixing an ugly detail (that has apparently been this
way since commit 61a2878402: "proc: Remove the hard coded inode
numbers" in 2006), this removes more lines of code than it adds. And it
just makes sense to update i_mode in the same place we update i_uid/gid.
Al Viro correctly points out that we could just do the inode fill in the
inode iops ->getattr() function instead. However, that does require
somewhat slightly more invasive changes, and adds yet *another* lookup
of the file descriptor. We need to do the revalidate() for other
reasons anyway, and have the file descriptor handy, so we might as well
fill in the information at this point.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit c57b546840 (pktgen: fix crash at module unload) did a very poor
job with list primitives.
1) list_splice() arguments were in the wrong order
2) list_splice(list, head) has undefined behavior if head is not
initialized.
3) We should use the list_splice_init() variant to clear pktgen_threads
list.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some discussion with the glibc mailing lists revealed that this was
necessary for 64-bit platforms with MIPS-like sign-extension rules
for 32-bit values. The original symptom was that passing (uid_t)-1 to
setreuid() was failing in programs linked -pthread because of the "setxid"
mechanism for passing setxid-type function arguments to the syscall code.
SYSCALL_WRAPPERS handles ensuring that all syscall arguments end up with
proper sign-extension and is thus the appropriate fix for this problem.
On other platforms (s390, powerpc, sparc64, and mips) this was fixed
in 2.6.28.6. The general issue is tracked as CVE-2009-0029.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=tk2M
-----END PGP SIGNATURE-----
Merge tag 'linus-mce-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull a machine check recovery fix from Tony Luck.
I really don't like how the MCE code does some of the things it does,
but this does seem to be an improvement.
* tag 'linus-mce-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
x86/mce: Only restart instruction after machine check recovery if it is safe
Commit 41101809a8 ("fork: Provide weak arch_release_[task_struct|
thread_info] functions") in -tip highlights a problem in the frv arch,
where it has needles prototypes for alloc_task_struct_node and
free_task_struct. This now shows up as:
kernel/fork.c:120:66: error: static declaration of 'alloc_task_struct_node' follows non-static declaration
kernel/fork.c:127:51: error: static declaration of 'free_task_struct' follows non-static declaration
since that commit turned them into real functions. Since arch/frv does
does not define define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR (i.e. it just
uses the generic ones) it shouldn't list these at all.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I found some kernel messages such as:
SLUB raid5-md127: kmem_cache_destroy called for cache that still has objects.
Pid: 6143, comm: mdadm Tainted: G O 3.4.0-rc6+ #75
Call Trace:
kmem_cache_destroy+0x328/0x400
free_conf+0x2d/0xf0 [raid456]
stop+0x41/0x60 [raid456]
md_stop+0x1a/0x60 [md_mod]
do_md_stop+0x74/0x470 [md_mod]
md_ioctl+0xff/0x11f0 [md_mod]
blkdev_ioctl+0xd8/0x7a0
block_ioctl+0x3b/0x40
do_vfs_ioctl+0x96/0x560
sys_ioctl+0x91/0xa0
system_call_fastpath+0x16/0x1b
Then using kmemleak I found these messages:
unreferenced object 0xffff8800b6db7380 (size 112):
comm "mdadm", pid 5783, jiffies 4294810749 (age 90.589s)
hex dump (first 32 bytes):
01 01 db b6 ad 4e ad de ff ff ff ff ff ff ff ff .....N..........
ff ff ff ff ff ff ff ff 98 40 4a 82 ff ff ff ff .........@J.....
backtrace:
kmemleak_alloc+0x21/0x50
kmem_cache_alloc+0xeb/0x1b0
kmem_cache_open+0x2f1/0x430
kmem_cache_create+0x158/0x320
setup_conf+0x649/0x770 [raid456]
run+0x68b/0x840 [raid456]
md_run+0x529/0x940 [md_mod]
do_md_run+0x18/0xc0 [md_mod]
md_ioctl+0xba8/0x11f0 [md_mod]
blkdev_ioctl+0xd8/0x7a0
block_ioctl+0x3b/0x40
do_vfs_ioctl+0x96/0x560
sys_ioctl+0x91/0xa0
system_call_fastpath+0x16/0x1b
This bug was introduced by commit a8364d5555 ("slub: only IPI CPUs that
have per cpu obj to flush"), which did not include checks for per cpu
partial pages being present on a cpu.
Signed-off-by: majianpeng <majianpeng@gmail.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
map_files/ entries are never supposed to be executed, still curious
minds might try to run them, which leads to the following deadlock
======================================================
[ INFO: possible circular locking dependency detected ]
3.4.0-rc4-24406-g841e6a6 #121 Not tainted
-------------------------------------------------------
bash/1556 is trying to acquire lock:
(&sb->s_type->i_mutex_key#8){+.+.+.}, at: do_lookup+0x267/0x2b1
but task is already holding lock:
(&sig->cred_guard_mutex){+.+.+.}, at: prepare_bprm_creds+0x2d/0x69
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sig->cred_guard_mutex){+.+.+.}:
validate_chain+0x444/0x4f4
__lock_acquire+0x387/0x3f8
lock_acquire+0x12b/0x158
__mutex_lock_common+0x56/0x3a9
mutex_lock_killable_nested+0x40/0x45
lock_trace+0x24/0x59
proc_map_files_lookup+0x5a/0x165
__lookup_hash+0x52/0x73
do_lookup+0x276/0x2b1
walk_component+0x3d/0x114
do_last+0xfc/0x540
path_openat+0xd3/0x306
do_filp_open+0x3d/0x89
do_sys_open+0x74/0x106
sys_open+0x21/0x23
tracesys+0xdd/0xe2
-> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}:
check_prev_add+0x6a/0x1ef
validate_chain+0x444/0x4f4
__lock_acquire+0x387/0x3f8
lock_acquire+0x12b/0x158
__mutex_lock_common+0x56/0x3a9
mutex_lock_nested+0x40/0x45
do_lookup+0x267/0x2b1
walk_component+0x3d/0x114
link_path_walk+0x1f9/0x48f
path_openat+0xb6/0x306
do_filp_open+0x3d/0x89
open_exec+0x25/0xa0
do_execve_common+0xea/0x2f9
do_execve+0x43/0x45
sys_execve+0x43/0x5a
stub_execve+0x6c/0xc0
This is because prepare_bprm_creds grabs task->signal->cred_guard_mutex
and when do_lookup happens we try to grab task->signal->cred_guard_mutex
again in lock_trace.
Fix it using plain ptrace_may_access() helper in proc_map_files_lookup()
and in proc_map_files_readdir() instead of lock_trace(), the caller must
be CAP_SYS_ADMIN granted anyway.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The reset date of the ST Micro version of PL031 is 2000-01-01. The
correct weekday for 2000-01-01 is saturday, but pl031 is initialized to
sunday. This may lead to alarm malfunction, so configure the correct
wday if RTC_DR indicates reset.
Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM fixes from Russell King:
"Small set of fixes again."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path
ARM: 7418/1: LPAE: fix access flag setup in mem_type_table
ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS
ARM: 7417/1: vfp: ensure preemption is disabled when enabling VFP access
Pull two networking fixes from David S. Miller:
1) Thanks to Willy Tarreau and Eric Dumazet, we've unlocked a bug that's
been present in do_tcp_sendpages() since that function was written in
2002.
When we block to wait for memory we have to unconditionally try and
push out pending TCP data, otherwise we can block for an unreasonably
long amount of time.
2) Fix deadlock in e1000, fixes kernel bugzilla 43132
From Tushar Dave.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
e1000: Prevent reset task killing itself.
tcp: do_tcp_sendpages() must try to push data out on oom conditions
Commit 1cc0c998fd ("ACPI: Fix D3hot v D3cold confusion") introduced a
bug in __acpi_bus_set_power() and changed the behavior of
acpi_pci_set_power_state() in such a way that it generally doesn't work
as expected if PCI_D3hot is passed to it as the second argument.
First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to
__acpi_bus_set_power() and the explicit_set flag is set for the D3cold
state, the function will try to execute AML method called "_PS4", which
doesn't exist.
Fix this by adding a check to ensure that the name of the AML method
to execute for transitions to ACPI_STATE_D3_COLD is correct in
__acpi_bus_set_power(). Also make sure that the explicit_set flag
for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify
acpi_power_transition() to avoid accessing power resources for
ACPI_STATE_D3_COLD, because they don't exist.
Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the
target state, the function will request a transition to
ACPI_STATE_D3_HOT instead of ACPI_STATE_D3. However,
ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML
method is defined for the given device, which is rare. This causes
problems to happen on systems where devices were successfully put
into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work
now. In particular, some unused graphics adapters are not turned
off as a result.
To fix this issue restore the old behavior of
acpi_pci_set_power_state(), which is to request a transition to
ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or
PCI_D3cold is passed to it as the argument.
This approach is not ideal, because generally power should not
be removed from devices if PCI_D3hot is the target power state,
but since this behavior is relied on, we have no choice but to
restore it at the moment and spend more time on designing a
better solution in the future.
References: https://bugzilla.kernel.org/show_bug.cgi?id=43228
Reported-by: rocko <rockorequin@hotmail.com>
Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Reported-and-tested-by: Peter <lekensteyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Killing reset task while adapter is resetting causes deadlock.
Only kill reset task if adapter is not resetting.
Ref bug #43132 on bugzilla.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since recent changes on TCP splicing (starting with commits 2f533844
"tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp:
tcp_sendpages() should call tcp_push() once"), I started seeing
massive stalls when forwarding traffic between two sockets using
splice() when pipe buffers were larger than socket buffers.
Latest changes (net: netdev_alloc_skb() use build_skb()) made the
problem even more apparent.
The reason seems to be that if do_tcp_sendpages() fails on out of memory
condition without being able to send at least one byte, tcp_push() is not
called and the buffers cannot be flushed.
After applying the attached patch, I cannot reproduce the stalls at all
and the data rate it perfectly stable and steady under any condition
which previously caused the problem to be permanent.
The issue seems to have been there since before the kernel migrated to
git, which makes me think that the stalls I occasionally experienced
with tux during stress-tests years ago were probably related to the
same issue.
This issue was first encountered on 3.0.31 and 3.2.17, so please backport
to -stable.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org>
Pull two more target-core updates from Nicholas Bellinger:
"The first patch addresses a SPC-2 reservations RELEASE bug in a
special (iscsi specific) multi-ISID setup case that was allowing the
same initiator to be able to incorrect release it's own reservation on
a different SCSI path with enforce_pr_isid=1 operation. This bug was
caught by Bernhard Kohl.
The second patch is to address a bug with FILEIO backends where the
incorrect number of blocks for READ_CAPACITY was being reported after
an underlying device-mapper block_device size change. This patch uses
now i_size_read() in fd_get_blocks() for FILEIO backends with an
underlying block_device, instead of trying to determine this value at
setup time during fd_create_virtdevice(). (hch CC'ed)
Both are CC'ed to stable."
* '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix bug in handling of FILEIO + block_device resize ops
target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups
This patch fixes a bug in the handling of FILEIO w/ underlying block_device
resize operations where the original fd_dev->fd_dev_size was incorrectly being
used in fd_get_blocks() for READ_CAPACITY response payloads.
This patch avoids using fd_dev->fd_dev_size for FILEIO devices with
an underlying block_device, and instead changes fd_get_blocks() to
get the sector count directly from i_size_read() as recommended by hch.
Reported-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Here are a couple of last minute virtio fixes for 3.4.
Hope it's not too late yes - I might have tried too hard
to make sure the fix is well tested.
Fixes are by Amit and myself. One fixes module removal
and one suspend of a VM, the last one the handling of out
of memory condition.
They are thus very low risk as most people never hit these paths, but do fix
very annoying problems for people that do use the feature.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJPtMReAAoJECgfDbjSjVRp/7sIAIj1C/FaDWpKYydSti2wGO5C
oT4JIFbiPUbs+9dkfDQve744ox3f9zW/K1e+xr0QkSpIDT76NFihUr++9PTGpLlw
LPxbHXljQ+370gMu9eoF0iewRpY8rca3ZwL+5kb5GA+J+RGcXWbrj/wvu1IFW5Yy
cGI8y/dkpEW42rVp1SJ+/yIYidkP2Ko017j/BmfTq0YIU2g8e+cH00uqQhhPaXlH
h8PYxpzWBJbh1jmA6Zb0hsVfDpSrZoylCLEOeN0Vs1xF9MXwagAkVcIITdQCsIIh
O7xsU+QB9pQd0RcUGXHJh8UNo7O5y55+wiZt/YDt3q8su4tPdPjjybmlBx6CJDE=
=/XBC
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull last minute virtio fixes from Michael S. Tsirkin:
"Here are a couple of last minute virtio fixes for 3.4. Hope it's not
too late yes - I might have tried too hard to make sure the fix is
well tested.
Fixes are by Amit and myself. One fixes module removal and one
suspend of a VM, the last one the handling of out of memory condition.
They are thus very low risk as most people never hit these paths, but
do fix very annoying problems for people that do use the feature.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_net: invoke softirqs after __napi_schedule
virtio: balloon: let host know of updated balloon size before module removal
virtio: console: tell host of open ports after resume from s3/s4
I will stop trying to predict when we're done with fixes for a release.
Here's another small batch of three patches for arm-soc:
- A fix for a boot time WARN_ON() due to irq domain conversion on PRIMA2
- Fix for a regression in Tegra SMP spinup code due to swapped register offsets
- Fixed config dependency for mv_cesa crypto driver to avoid build breakage
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=jft8
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM: SoC fixes from Olof Johansson:
"I will stop trying to predict when we're done with fixes for a
release.
Here's another small batch of three patches for arm-soc:
- A fix for a boot time WARN_ON() due to irq domain conversion on
PRIMA2
- Fix for a regression in Tegra SMP spinup code due to swapped
register offsets
- Fixed config dependency for mv_cesa crypto driver to avoid build
breakage"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller
crypto: mv_cesa requires on CRYPTO_HASH to build
ARM: tegra: Fix flow controller accesses
one fixes a bug in the new raid10 resize code so is relevant
to 3.4 only
Other fixes a bug in the use of md by dm-raid, so is relevant
to any kernel with dm-raid support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=9zxe
-----END PGP SIGNATURE-----
Merge tag 'md-3.4-fixes' of git://neil.brown.name/md
Pull two md fixes from NeilBrown:
"One fixes a bug in the new raid10 resize code so is relevant to 3.4
only.
The other fixes a bug in the use of md by dm-raid, so is relevant to
any kernel with dm-raid support"
* tag 'md-3.4-fixes' of git://neil.brown.name/md:
MD: Add del_timer_sync to mddev_suspend (fix nasty panic)
md/raid10: set dev_sectors properly when resizing devices in array.
