This patch adds support for the AD5601/AD5611/AD5621 single channel,
8-/10-/12-bit, buffered voltage output DACs.
Changes since v1:
Sort Kconfig description my number
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pinfo->name is a 32 char buffer. In the original code, the last char
wasn't fully utilized.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These two allocations are only called from the probe() path and there
aren't any locks held for probe().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. The comment is hinting that we should sanity check the
header to verify that if it claims its from a 5Ghz channel, that the
chip actually supports 5 Ghz. This is redundant (2.4G only chips do
not report 5G channels) and thus the comment was removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The previous patch flushed the AMPDU packets associated to a certain STA/AP
in the driver queues, but left the AMPDU packets in the DMA queue untouched.
This patch invalidates AMPDU packets in the DMA queue, so they can be
processed accordingly when hardware releases the packets to the driver.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver now flushes AMPDU packets for a specified station on Mac80211 calling
wl_ops_ampdu_action(IEEE80211_AMPDU_TX_STOP). Not all AMPDU packets are flushed
yet: there can still be AMPDU packets pending in hardware (DMA). That is the
subject of the next patch in this series.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mac80211 can transmit packets where the control.sta field is NULL.
The driver dereferenced this. Bugfix was to only dereference a non NULL
ieee80211_sta pointer.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver uses a struct called 'scb', this struct is primarily used for AMPDU
functionality and is embedded in struct ieee80211_sta. To increase driver
robustness, the case in which this scb pointer is NULL is now handled graceful.
This paves the way for the next patch in this series.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We mark this as unused as well, given that I find no users,
at a later time we can determine to nuke this or not...
Cc: Naveen Singh <naveen.singh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for i in $(find ./drivers/staging/ath6kl/ -name \*.[ch]) ; do \
sed -r -i -e "s/A_MEMCMP/memcmp/g" $i; done
Cc: Naveen Singh <naveen.singh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for i in $(find ./drivers/staging/ath6kl/ -name \*.[ch]) ; do \
sed -r -i -e "s/A_MEMCPY/memcpy/g" $i; done
Cc: Naveen Singh <naveen.singh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The min() macro does strict type-checking so use min_t() instead
to silence a compile warning.
Cc: Naveen Singh <naveen.singh@atheros.com>
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the USB_STORAGE_ENE_UB6250 entry so that it stays under the
USB_STORAGE menu.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix ene_ub6250 build: it uses usb_storage driver interfaces, so it
should depend on USB_STORAGE.
ene_ub6250.c:(.text+0x14ff19): undefined reference to `usb_stor_reset_resume'
ene_ub6250.c:(.text+0x14ffb1): undefined reference to `usb_stor_bulk_transfer_buf'
ene_ub6250.c:(.text+0x14ffdd): undefined reference to `usb_stor_bulk_srb'
ene_ub6250.c:(.text+0x14fff1): undefined reference to `usb_stor_bulk_transfer_sg'
ene_ub6250.c:(.text+0x1503dd): undefined reference to `usb_stor_set_xfer_buf'
ene_ub6250.c:(.text+0x15048e): undefined reference to `usb_stor_access_xfer_buf'
ene_ub6250.c:(.text+0x150723): undefined reference to `usb_stor_probe1'
ene_ub6250.c:(.text+0x150795): undefined reference to `usb_stor_probe2'
ene_ub6250.c:(.text+0x1507af): undefined reference to `usb_stor_disconnect'
drivers/built-in.o:(.data+0x10224): undefined reference to `usb_stor_suspend'
drivers/built-in.o:(.data+0x10230): undefined reference to `usb_stor_pre_reset'
drivers/built-in.o:(.data+0x10234): undefined reference to `usb_stor_post_reset'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
"buf" gets allocated twice in a row. It's the second allocation which
is correct. The first one should be removed.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: huajun li <huajun.li.lee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
