This patch removes typedef for _packet_info,
changes the name of the struct from
_packet_info to bcm_packet_info.
In addition, any calls to the following typedefs
"PacketInfo, _packet_info" are changed to call the
struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes typedef for _PER_TARANG_DATA,
changes the name of the struct from
_PER_TARANG_DATA to bcm_per_tarang_data.
In addition, any calls to the following typedefs
"PER_TARANG_DATA, *PPER_TARANG_DATA" are
changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the conditional check on
macro REL_4_1, and the corresponding controlled
text because it is not used.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes typedef for _STTARGETDSXBUFFER,
changes the name of the struct from
_STTARGETDSXBUFFER to bcm_targetdsx_buffer.
In addition, any calls to the following typedefs
"STTARGETDSXBUFFER, *PSTTARGETDSXBUFFER" are
changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes typedef for _ETH_HEADER_STRUC,
changes the name of the struct from
_ETH_HEADER_STRUC to bcm_eth_header.
In addition, any calls to the following typedefs
"ETH_HEADER_STRUC, *PETH_HEADER_STRUC" are
changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes typedef for FirmwareInfo,
changes the name from Firmwareinfo to
bcm_firmware_info. In addition, any calls to
the following typedefs "PFIRMWARE_INFO,
FIRMWARE_INFO" are changed to call the struct
directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes typedef for _cntl_pkt because
it is not used.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the typedef for _DDR_SETTING,
changes the name of the struct from _DDR_SETTING,
to bcm_ddr_setting. In addition, any calls to the
following typedefs "DDR_SET_NODE and *PDDR_SET_NODE"
are changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the typedef from
eInterface_setting, and renames the enum
to bcm_einterface_setting.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename a macro to make it explicit it's for debugging.
Use %s: __func__ instead of embedding function names.
Coalesce formats, align arguments.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move these functions and remove their forward declarations:
pci230_ai_stop(), pci230_handle_ai(). Also move pci230_ai_cancel() for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move these functions and remove their forward declarations:
pci230_ao_stop(), pci230_handle_ao_nofifo(), pci230_handle_ao_fifo().
Also move pci230_ao_cancel() for aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove some forward function declarations: pci230_ct_setup_ns_mode(),
pci230_ns_to_single_timer(), pci230_cancel_ct(). Also need to move:
divide_ns().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the redundant forward function declarations.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the attach_pci() hook as function pci230_attach_pci(). This
is called by comedi_pci_auto_config() in preference to the old attach()
hook (implemented by pci230_attach() and still required for "manual"
configuration of comedi devices). The advantage of the attach_pci()
hook is that it avoids searching for the PCI device.
Refactor pci230_attach() and factor out code common to pci230_attach()
and pci230_attach_pci() into new functions pci230_match_pci_board(),
pci230_find_pci_board(), pci230_find_pci(), pci230_alloc_private() and
pci230_attach_common().
Finally, move pci230_attach() and pci230_detach() along with all the new
functions towards the bottom of the file as it makes the patch much
cleaner (though longer) and I plan to move things around soon to get
rid of the remaining forward references.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'thisboard' and 'devpriv' macros rely on a local variable having a
specific name and yield pointers derived from that local variable.
Replace the macros with local variables wherever they occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the printk calls with dev_info, dev_err, etc.
A load of DPRINTK() macro calls which may result in printk() calls
have been left alone to be tackled en masse at a later date.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'thisboard' and 'devpriv' macros rely on a local variable having a
specific name and yield pointers derived from that local variable.
Replace the macros with local variables wherever they occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci224_find_pci() finds a supported PCI device, returning 0 on success
or -EIO on failure and returning the pointer to the PCI device via a
struct pci_dev ** parameter. Change it to return the struct pci_dev *
on success or NULL on failure.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the printk calls with dev_info, dev_err, etc. There were some
consecutive printk calls without newlines which now scnprintf into a
temporary buffer and this bit of code has been factored out into new
function pci224_report_attach().
A couple of DPRINTK() macro calls which may result in printk() calls
have been left alone to be tackled en masse at a later date.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci224_attach_pci() is only called during PCI probe, indirectly via
comedi_pci_auto_config(), so it can be marked __devinit.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the attach_pci() hook as function dio200_attach_pci(). This
is called by comedi_pci_auto_config() in preference to the old attach()
hook (implemented by dio200_attach()) and avoids searching for the
probed PCI device.
Factor out code common to dio200_find_pci() and dio200_attach_pci() into
new function dio200_find_pci_board(). Factor out most code common to
dio200_attach() and dio200_attach_pci() into new functions
dio200_pci_common_attach() and dio200_common_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'thisboard', 'thislayout' and 'devpriv' macros rely on a local
variable having a specific name and yield pointers derived from that
local variable. Replace the macros with local variables wherever they
occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dio200_find_pci() finds a supported PCI device, returning 0 on success
or -EIO on failure and returning the pointer to the PCI device via a
struct pci_dev ** parameter. Change it to return the struct pci_dev *
on success or NULL on failure.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the printk calls with dev_info, dev_err, etc. There were some
consecutive printk calls without newlines which now scnprintf into a
temporary buffer and this bit of code has been factored out into new
function dio200_report_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved some functions and variables to avoid forward declarations. Moved
PCI table closer to the struct pci_driver that refers to it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If PCI boards are supported, use the module_comedi_pci_driver() macro to
register the module as a comedi driver and a PCI driver. Otherwise,
only ISA boards are supported so use the module_comedi_driver() macro to
register the module as a comedi driver.
Renamed 'driver_amplc_dio200' to 'amplc_dio200_driver' and removed
'driver_' prefix from PCI related functions and variables, purely for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change conditional compilation on kernel options to use the IS_ENABLED()
macro. Remove most of the #ifdef lines and add extra if
(IS_ENABLED(xxx)) tests so the compiler can remove unreachable code.
The pci_driver stuff and device table and some of the static const data
is still conditionally compiled.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the attach_pci() hook as function pc263_attach_pci(). This is
called bu comedi_pci_auto_config() in preference to the old attach()
hook (implemented by pc263_attach()) and avoids searching for the probed
PCI device.
Factor out code common to pc263_find_pci() and pc263_attach_pci() into
new function pc263_find_pci_board(). Factor out most code common to
pc263_attach() and pc263_attach_pci() into new functions
pc263_pci_common_attach() and pc263_common_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'thisboard' and 'devpriv' macros rely on a local variable having a
specific name and yield pointers derived from that local variable.
Replace the macros with local variables wherever they occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pc263_find_pci() finds a supported PCI device, returning 0 on success
or -EIO on failure and returning the pointer to the PCI device via a
struct pci_dev ** parameter. Change it to return the struct pci_dev *
on success or NULL on failure.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove fancy_name member from struct pc263_board. It is initialized in
pc263_boards[] but not used anywhere else.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the printk calls with dev_info, dev_err, etc. There were some
consecutive printk calls without newlines which now snprintf into a
temporary buffer and this bit of code has been factored out into new
function pc263_report_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved some functions and variables to avoid forward declarations. Moved
PCI table closer to the struct pci_driver that refers to it.
Also removed some useless comments from pc263_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If PCI boards are supported, use the module_comedi_pci_driver() macro to
register the module as a comedi driver and a PCI driver. Otherwise,
only ISA boards are supported so use the module_comedi_driver() macro to
register the module as a comedi driver.
Renamed 'driver_amplc_pc263' to 'amplc_pc263_driver' and removed
'driver_' prefix from PCI related functions and variables, purely for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change conditional compilation on kernel options to use the IS_ENABLED()
macro. Remove most of the #ifdef lines and add extra if
(IS_ENABLED(xxx)) tests so the compiler can remove unreachable code.
The pci_driver stuff and device table is still conditionally compiled.
In pc263_attach() move the call to alloc_private() as it is only used
for PCI devices. (In pc263_detach(), for ISA devices a non-zero
dev->iobase means the I/O region needs releasing.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a missing case label in the switch statement that prints out
details of the attached device in pc263_attach(). Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a relay output card with no inputs. It's single subdevice is
currently a digital input/output subdevice (COMEDI_SUBD_DIO). It should
really be a digital output subdevice (COMEDI_SUBD_DO). Change the
subdevice type and remove the insn_config() hook as it doesn't do
anything useful.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial state of the relays is being read incorrectly. It's reading
a single 8-bit port twice, but should be reading two consecutive 8-bit
ports. Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove most of the #if IS_ENABLED(xxx) lines, but add extra if
(IS_ENABLED(xxx)) tests so the compiler can remove unreachable code.
The pci_driver stuff and device table is still conditionally compiled.
Also made pc236_find_pci() static as it was accidentally made non-static
by an earlier patch, so the compiler wouldn't remove it when it was
unreachable.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the attach_pci() hook as function pc236_attach_pci(). This is
called bu comedi_pci_auto_config() in preference to the old attach()
hook (implemented by pc236_attach()) and avoids searching for the probed
PCI device.
Factor out code common to pc236_find_pci() and pc236_attach_pci() into
new function pc236_find_pci_board(). Factor out most code common to
pc236_attach() and pc236_attach_pci() into new functions
pc236_pci_common_attach() and pc236_common_attach().
Also #if out member 'devid' from struct pc236_board unless PCI boards
are supported as it is not used for ISA boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'thisboard' and 'devpriv' macros rely on a local variable having a
specific name and yield pointers derived from that local variable.
Replace the macros with local variables wherever they occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pc236_find_pci() finds a supported PCI device, returning 0 on success
or -EIO on failure and returning the pointer to the PCI device via a
struct pci_dev ** parameter. Change it to return the struct pci_dev *
on success or NULL on failure.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove fancy_name member from struct pc236_board. It is initialized in
pc235_boards[] but not used anywhere else.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the printk calls with dev_info, dev_err, etc. There were some
consecutive printk calls without newlines which now scnprintf into a
temporary buffer and this bit of code has been factored out into new
function pc236_report_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved some functions and variables to avoid forward declarations. Moved
PCI table closer to the struct pci_driver that refers to it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If PCI boards are supported, use the module_comedi_pci_driver() macro to
register the module as a comedi driver and a PCI driver. Otherwise,
only ISA boards are supported so use the module_comedi_driver() macro to
register the module as a comedi driver.
Renamed 'driver_amplc_pc236' to 'amplc_pc236_driver' and removed
'driver_' prefix from PCI related functions and variables, purely for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change conditional compilation on kernel config options to use the
IS_ENABLED() macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the inline functions uvirt_to_kva and kvirt_to_kva, they
are not referenced by any of the drivers.c code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
