1
linux/mm/slob.c

650 lines
16 KiB
C
Raw Normal View History

[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
/*
* SLOB Allocator: Simple List Of Blocks
*
* Matt Mackall <mpm@selenic.com> 12/30/03
*
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
* NUMA support by Paul Mundt, 2007.
*
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
* How SLOB works:
*
* The core of SLOB is a traditional K&R style heap allocator, with
* support for returning aligned objects. The granularity of this
* allocator is as little as 2 bytes, however typically most architectures
* will require 4 bytes on 32-bit and 8 bytes on 64-bit.
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
*
* The slob heap is a set of linked list of pages from alloc_pages(),
* and within each page, there is a singly-linked list of free blocks
* (slob_t). The heap is grown on demand. To reduce fragmentation,
* heap pages are segregated into three lists, with objects less than
* 256 bytes, objects less than 1024 bytes, and all other objects.
*
* Allocation from heap involves first searching for a page with
* sufficient free blocks (using a next-fit-like approach) followed by
* a first-fit scan of the page. Deallocation inserts objects back
* into the free list in address order, so this is effectively an
* address-ordered first fit.
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
*
* Above this is an implementation of kmalloc/kfree. Blocks returned
* from kmalloc are prepended with a 4-byte header with the kmalloc size.
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
* If kmalloc is asked for objects of PAGE_SIZE or larger, it calls
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
* alloc_pages() directly, allocating compound pages so the page order
* does not have to be separately tracked, and also stores the exact
* allocation size in page->private so that it can be used to accurately
* provide ksize(). These objects are detected in kfree() because slob_page()
* is false for them.
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
*
* SLAB is emulated on top of SLOB by simply calling constructors and
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
* destructors for every SLAB allocation. Objects are returned with the
* 4-byte alignment unless the SLAB_HWCACHE_ALIGN flag is set, in which
* case the low-level allocator will fragment blocks to create the proper
* alignment. Again, objects of page-size or greater are allocated by
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
* calling alloc_pages(). As SLAB objects know their size, no separate
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
* size bookkeeping is necessary and there is essentially no allocation
* space overhead, and compound pages aren't needed for multi-page
* allocations.
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
*
* NUMA support in SLOB is fairly simplistic, pushing most of the real
* logic down to the page allocator, and simply doing the node accounting
* on the upper levels. In the event that a node id is explicitly
* provided, alloc_pages_node() with the specified node id is used
* instead. The common case (or when the node id isn't explicitly provided)
* will default to the current node, as per numa_node_id().
*
* Node aware pages are still inserted in to the global freelist, and
* these are scanned for by matching against the node id encoded in the
* page flags. As a result, block allocations that can be satisfied from
* the freelist will only be done so on pages residing on the same node,
* in order to prevent random node placement.
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
*/
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
#include <linux/kernel.h>
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/rcupdate.h>
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
#include <linux/list.h>
#include <asm/atomic.h>
/*
* slob_block has a field 'units', which indicates size of block if +ve,
* or offset of next block if -ve (in SLOB_UNITs).
*
* Free blocks of size 1 unit simply contain the offset of the next block.
* Those with larger size contain their size in the first SLOB_UNIT of
* memory, and the offset of the next free block in the second SLOB_UNIT.
*/
#if PAGE_SIZE <= (32767 * 2)
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
typedef s16 slobidx_t;
#else
typedef s32 slobidx_t;
#endif
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
struct slob_block {
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
slobidx_t units;
};
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
typedef struct slob_block slob_t;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* We use struct page fields to manage some slob allocation aspects,
* however to avoid the horrible mess in include/linux/mm_types.h, we'll
* just define our own struct page type variant here.
*/
struct slob_page {
union {
struct {
unsigned long flags; /* mandatory */
atomic_t _count; /* mandatory */
slobidx_t units; /* free units left in page */
unsigned long pad[2];
slob_t *free; /* first free slob_t in page */
struct list_head list; /* linked list of free pages */
};
struct page page;
};
};
static inline void struct_slob_page_wrong_size(void)
{ BUILD_BUG_ON(sizeof(struct slob_page) != sizeof(struct page)); }
/*
* free_slob_page: call before a slob_page is returned to the page allocator.
*/
static inline void free_slob_page(struct slob_page *sp)
{
reset_page_mapcount(&sp->page);
sp->page.mapping = NULL;
}
/*
* All partially free slob pages go on these lists.
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
*/
#define SLOB_BREAK1 256
#define SLOB_BREAK2 1024
static LIST_HEAD(free_slob_small);
static LIST_HEAD(free_slob_medium);
static LIST_HEAD(free_slob_large);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* slob_page: True for all slob pages (false for bigblock pages)
*/
static inline int slob_page(struct slob_page *sp)
{
return PageSlobPage((struct page *)sp);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
}
static inline void set_slob_page(struct slob_page *sp)
{
__SetPageSlobPage((struct page *)sp);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
}
static inline void clear_slob_page(struct slob_page *sp)
{
__ClearPageSlobPage((struct page *)sp);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
}
/*
* slob_page_free: true for pages on free_slob_pages list.
*/
static inline int slob_page_free(struct slob_page *sp)
{
return PageSlobFree((struct page *)sp);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
}
static void set_slob_page_free(struct slob_page *sp, struct list_head *list)
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
{
list_add(&sp->list, list);
__SetPageSlobFree((struct page *)sp);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
}
static inline void clear_slob_page_free(struct slob_page *sp)
{
list_del(&sp->list);
__ClearPageSlobFree((struct page *)sp);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
}
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
#define SLOB_UNIT sizeof(slob_t)
#define SLOB_UNITS(size) (((size) + SLOB_UNIT - 1)/SLOB_UNIT)
#define SLOB_ALIGN L1_CACHE_BYTES
/*
* struct slob_rcu is inserted at the tail of allocated slob blocks, which
* were created with a SLAB_DESTROY_BY_RCU slab. slob_rcu is used to free
* the block using call_rcu.
*/
struct slob_rcu {
struct rcu_head head;
int size;
};
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* slob_lock protects all slob allocator structures.
*/
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
static DEFINE_SPINLOCK(slob_lock);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* Encode the given size and next info into a free slob block s.
*/
static void set_slob(slob_t *s, slobidx_t size, slob_t *next)
{
slob_t *base = (slob_t *)((unsigned long)s & PAGE_MASK);
slobidx_t offset = next - base;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (size > 1) {
s[0].units = size;
s[1].units = offset;
} else
s[0].units = -offset;
}
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* Return the size of a slob block.
*/
static slobidx_t slob_units(slob_t *s)
{
if (s->units > 0)
return s->units;
return 1;
}
/*
* Return the next free slob block pointer after this one.
*/
static slob_t *slob_next(slob_t *s)
{
slob_t *base = (slob_t *)((unsigned long)s & PAGE_MASK);
slobidx_t next;
if (s[0].units < 0)
next = -s[0].units;
else
next = s[1].units;
return base+next;
}
/*
* Returns true if s is the last free block in its page.
*/
static int slob_last(slob_t *s)
{
return !((unsigned long)slob_next(s) & ~PAGE_MASK);
}
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
static void *slob_new_page(gfp_t gfp, int order, int node)
{
void *page;
#ifdef CONFIG_NUMA
if (node != -1)
page = alloc_pages_node(node, gfp, order);
else
#endif
page = alloc_pages(gfp, order);
if (!page)
return NULL;
return page_address(page);
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* Allocate a slob block within a given slob_page sp.
*/
static void *slob_page_alloc(struct slob_page *sp, size_t size, int align)
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
{
slob_t *prev, *cur, *aligned = 0;
int delta = 0, units = SLOB_UNITS(size);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
for (prev = NULL, cur = sp->free; ; prev = cur, cur = slob_next(cur)) {
slobidx_t avail = slob_units(cur);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
if (align) {
aligned = (slob_t *)ALIGN((unsigned long)cur, align);
delta = aligned - cur;
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (avail >= units + delta) { /* room enough? */
slob_t *next;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
if (delta) { /* need to fragment head to align? */
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
next = slob_next(cur);
set_slob(aligned, avail - delta, next);
set_slob(cur, delta, aligned);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
prev = cur;
cur = aligned;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
avail = slob_units(cur);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
next = slob_next(cur);
if (avail == units) { /* exact fit? unlink. */
if (prev)
set_slob(prev, slob_units(prev), next);
else
sp->free = next;
} else { /* fragment */
if (prev)
set_slob(prev, slob_units(prev), cur + units);
else
sp->free = cur + units;
set_slob(cur + units, avail - units, next);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
sp->units -= units;
if (!sp->units)
clear_slob_page_free(sp);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
return cur;
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (slob_last(cur))
return NULL;
}
}
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* slob_alloc: entry point into the slob allocator.
*/
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
static void *slob_alloc(size_t size, gfp_t gfp, int align, int node)
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
{
struct slob_page *sp;
struct list_head *prev;
struct list_head *slob_list;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
slob_t *b = NULL;
unsigned long flags;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
if (size < SLOB_BREAK1)
slob_list = &free_slob_small;
else if (size < SLOB_BREAK2)
slob_list = &free_slob_medium;
else
slob_list = &free_slob_large;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
spin_lock_irqsave(&slob_lock, flags);
/* Iterate through each partially free page, try to find room */
list_for_each_entry(sp, slob_list, list) {
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
#ifdef CONFIG_NUMA
/*
* If there's a node specification, search for a partial
* page with a matching node id in the freelist.
*/
if (node != -1 && page_to_nid(&sp->page) != node)
continue;
#endif
/* Enough room on this page? */
if (sp->units < SLOB_UNITS(size))
continue;
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
/* Attempt to alloc */
prev = sp->list.prev;
b = slob_page_alloc(sp, size, align);
if (!b)
continue;
/* Improve fragment distribution and reduce our average
* search time by starting our next search here. (see
* Knuth vol 1, sec 2.5, pg 449) */
if (prev != slob_list->prev &&
slob_list->next != prev->next)
list_move_tail(slob_list, prev->next);
break;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
spin_unlock_irqrestore(&slob_lock, flags);
/* Not enough space: must allocate a new page */
if (!b) {
b = slob_new_page(gfp & ~__GFP_ZERO, 0, node);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (!b)
return 0;
sp = (struct slob_page *)virt_to_page(b);
set_slob_page(sp);
spin_lock_irqsave(&slob_lock, flags);
sp->units = SLOB_UNITS(PAGE_SIZE);
sp->free = b;
INIT_LIST_HEAD(&sp->list);
set_slob(b, SLOB_UNITS(PAGE_SIZE), b + SLOB_UNITS(PAGE_SIZE));
set_slob_page_free(sp, slob_list);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
b = slob_page_alloc(sp, size, align);
BUG_ON(!b);
spin_unlock_irqrestore(&slob_lock, flags);
}
if (unlikely((gfp & __GFP_ZERO) && b))
memset(b, 0, size);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
return b;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* slob_free: entry point into the slob allocator.
*/
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
static void slob_free(void *block, int size)
{
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
struct slob_page *sp;
slob_t *prev, *next, *b = (slob_t *)block;
slobidx_t units;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
unsigned long flags;
if (unlikely(ZERO_OR_NULL_PTR(block)))
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
return;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
BUG_ON(!size);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
sp = (struct slob_page *)virt_to_page(block);
units = SLOB_UNITS(size);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
spin_lock_irqsave(&slob_lock, flags);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (sp->units + units == SLOB_UNITS(PAGE_SIZE)) {
/* Go directly to page allocator. Do not pass slob allocator */
if (slob_page_free(sp))
clear_slob_page_free(sp);
clear_slob_page(sp);
free_slob_page(sp);
free_page((unsigned long)b);
goto out;
}
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (!slob_page_free(sp)) {
/* This slob page is about to become partially free. Easy! */
sp->units = units;
sp->free = b;
set_slob(b, units,
(void *)((unsigned long)(b +
SLOB_UNITS(PAGE_SIZE)) & PAGE_MASK));
set_slob_page_free(sp, &free_slob_small);
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
goto out;
}
/*
* Otherwise the page is already partially free, so find reinsertion
* point.
*/
sp->units += units;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (b < sp->free) {
if (b + units == sp->free) {
units += slob_units(sp->free);
sp->free = slob_next(sp->free);
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
set_slob(b, units, sp->free);
sp->free = b;
} else {
prev = sp->free;
next = slob_next(prev);
while (b > next) {
prev = next;
next = slob_next(prev);
}
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
if (!slob_last(prev) && b + units == next) {
units += slob_units(next);
set_slob(b, units, slob_next(next));
} else
set_slob(b, units, next);
if (prev + slob_units(prev) == b) {
units = slob_units(b) + slob_units(prev);
set_slob(prev, units, slob_next(b));
} else
set_slob(prev, slob_units(prev), b);
}
out:
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
spin_unlock_irqrestore(&slob_lock, flags);
}
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
/*
* End of slob allocator proper. Begin kmem_cache_alloc and kmalloc frontend.
*/
#ifndef ARCH_KMALLOC_MINALIGN
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long)
#endif
#ifndef ARCH_SLAB_MINALIGN
#define ARCH_SLAB_MINALIGN __alignof__(unsigned long)
#endif
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
void *__kmalloc_node(size_t size, gfp_t gfp, int node)
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
{
unsigned int *m;
int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
lockdep: annotate reclaim context (__GFP_NOFS) Here is another version, with the incremental patch rolled up, and added reclaim context annotation to kswapd, and allocation tracing to slab allocators (which may only ever reach the page allocator in rare cases, so it is good to put annotations here too). Haven't tested this version as such, but it should be getting closer to merge worthy ;) -- After noticing some code in mm/filemap.c accidentally perform a __GFP_FS allocation when it should not have been, I thought it might be a good idea to try to catch this kind of thing with lockdep. I coded up a little idea that seems to work. Unfortunately the system has to actually be in __GFP_FS page reclaim, then take the lock, before it will mark it. But at least that might still be some orders of magnitude more common (and more debuggable) than an actual deadlock condition, so we have some improvement I hope (the concept is no less complete than discovery of a lock's interrupt contexts). I guess we could even do the same thing with __GFP_IO (normal reclaim), and even GFP_NOIO locks too... but filesystems will have the most locks and fiddly code paths, so let's start there and see how it goes. It *seems* to work. I did a quick test. ================================= [ INFO: inconsistent lock state ] 2.6.28-rc6-00007-ged31348-dirty #26 --------------------------------- inconsistent {in-reclaim-W} -> {ov-reclaim-W} usage. modprobe/8526 [HC0[0]:SC0[0]:HE1:SE1] takes: (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd] {in-reclaim-W} state was registered at: [<ffffffff80267bdb>] __lock_acquire+0x75b/0x1a60 [<ffffffff80268f71>] lock_acquire+0x91/0xc0 [<ffffffff8070f0e1>] mutex_lock_nested+0xb1/0x310 [<ffffffffa002002b>] brd_init+0x2b/0x216 [brd] [<ffffffff8020903b>] _stext+0x3b/0x170 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 3929 hardirqs last enabled at (3929): [<ffffffff8070f2b5>] mutex_lock_nested+0x285/0x310 hardirqs last disabled at (3928): [<ffffffff8070f089>] mutex_lock_nested+0x59/0x310 softirqs last enabled at (3732): [<ffffffff8061f623>] sk_filter+0x83/0xe0 softirqs last disabled at (3730): [<ffffffff8061f5b6>] sk_filter+0x16/0xe0 other info that might help us debug this: 1 lock held by modprobe/8526: #0: (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd] stack backtrace: Pid: 8526, comm: modprobe Not tainted 2.6.28-rc6-00007-ged31348-dirty #26 Call Trace: [<ffffffff80265483>] print_usage_bug+0x193/0x1d0 [<ffffffff80266530>] mark_lock+0xaf0/0xca0 [<ffffffff80266735>] mark_held_locks+0x55/0xc0 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffff802667ca>] trace_reclaim_fs+0x2a/0x60 [<ffffffff80285005>] __alloc_pages_internal+0x475/0x580 [<ffffffff8070f29e>] ? mutex_lock_nested+0x26e/0x310 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffffa002006a>] brd_init+0x6a/0x216 [brd] [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffff8020903b>] _stext+0x3b/0x170 [<ffffffff8070f8b9>] ? mutex_unlock+0x9/0x10 [<ffffffff8070f83d>] ? __mutex_unlock_slowpath+0x10d/0x180 [<ffffffff802669ec>] ? trace_hardirqs_on_caller+0x12c/0x190 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 00:12:39 -07:00
lockdep_trace_alloc(flags);
if (size < PAGE_SIZE - align) {
if (!size)
return ZERO_SIZE_PTR;
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
m = slob_alloc(size + align, gfp, align, node);
if (!m)
return NULL;
*m = size;
return (void *)m + align;
} else {
void *ret;
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
ret = slob_new_page(gfp | __GFP_COMP, get_order(size), node);
if (ret) {
struct page *page;
page = virt_to_page(ret);
page->private = size;
}
return ret;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
}
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
EXPORT_SYMBOL(__kmalloc_node);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
void kfree(const void *block)
{
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
struct slob_page *sp;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
if (unlikely(ZERO_OR_NULL_PTR(block)))
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
return;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
sp = (struct slob_page *)virt_to_page(block);
if (slob_page(sp)) {
int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
unsigned int *m = (unsigned int *)(block - align);
slob_free(m, *m + align);
} else
put_page(&sp->page);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
EXPORT_SYMBOL(kfree);
/* can't use ksize for kmem_cache_alloc memory, only kmalloc */
size_t ksize(const void *block)
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
{
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
struct slob_page *sp;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
BUG_ON(!block);
if (unlikely(block == ZERO_SIZE_PTR))
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
return 0;
slob: rework freelist handling Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:07 -07:00
sp = (struct slob_page *)virt_to_page(block);
if (slob_page(sp)) {
int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
unsigned int *m = (unsigned int *)(block - align);
return SLOB_UNITS(*m) * SLOB_UNIT;
} else
return sp->page.private;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
struct kmem_cache {
unsigned int size, align;
unsigned long flags;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
const char *name;
void (*ctor)(void *);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
};
struct kmem_cache *kmem_cache_create(const char *name, size_t size,
size_t align, unsigned long flags, void (*ctor)(void *))
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
{
struct kmem_cache *c;
c = slob_alloc(sizeof(struct kmem_cache),
GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
if (c) {
c->name = name;
c->size = size;
if (flags & SLAB_DESTROY_BY_RCU) {
/* leave room for rcu footer at the end of object */
c->size += sizeof(struct slob_rcu);
}
c->flags = flags;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
c->ctor = ctor;
/* ignore alignment unless it's forced */
c->align = (flags & SLAB_HWCACHE_ALIGN) ? SLOB_ALIGN : 0;
if (c->align < ARCH_SLAB_MINALIGN)
c->align = ARCH_SLAB_MINALIGN;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
if (c->align < align)
c->align = align;
} else if (flags & SLAB_PANIC)
panic("Cannot create slab cache %s\n", name);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
return c;
}
EXPORT_SYMBOL(kmem_cache_create);
void kmem_cache_destroy(struct kmem_cache *c)
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
{
slob_free(c, sizeof(struct kmem_cache));
}
EXPORT_SYMBOL(kmem_cache_destroy);
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
void *kmem_cache_alloc_node(struct kmem_cache *c, gfp_t flags, int node)
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
{
void *b;
if (c->size < PAGE_SIZE)
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
b = slob_alloc(c->size, flags, c->align, node);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
else
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
b = slob_new_page(flags, get_order(c->size), node);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
if (c->ctor)
c->ctor(b);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
return b;
}
slob: initial NUMA support This adds preliminary NUMA support to SLOB, primarily aimed at systems with small nodes (tested all the way down to a 128kB SRAM block), whether asymmetric or otherwise. We follow the same conventions as SLAB/SLUB, preferring current node placement for new pages, or with explicit placement, if a node has been specified. Presently on UP NUMA this has the side-effect of preferring node#0 allocations (since numa_node_id() == 0, though this could be reworked if we could hand off a pfn to determine node placement), so single-CPU NUMA systems will want to place smaller nodes further out in terms of node id. Once a page has been bound to a node (via explicit node id typing), we only do block allocations from partial free pages that have a matching node id in the page flags. The current implementation does have some scalability problems, in that all partial free pages are tracked in the global freelist (with contention due to the single spinlock). However, these are things that are being reworked for SMP scalability first, while things like per-node freelists can easily be built on top of this sort of functionality once it's been added. More background can be found in: http://marc.info/?l=linux-mm&m=118117916022379&w=2 http://marc.info/?l=linux-mm&m=118170446306199&w=2 http://marc.info/?l=linux-mm&m=118187859420048&w=2 and subsequent threads. Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 23:38:22 -07:00
EXPORT_SYMBOL(kmem_cache_alloc_node);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
static void __kmem_cache_free(void *b, int size)
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
{
if (size < PAGE_SIZE)
slob_free(b, size);
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
else
free_pages((unsigned long)b, get_order(size));
}
static void kmem_rcu_free(struct rcu_head *head)
{
struct slob_rcu *slob_rcu = (struct slob_rcu *)head;
void *b = (void *)slob_rcu - (slob_rcu->size - sizeof(struct slob_rcu));
__kmem_cache_free(b, slob_rcu->size);
}
void kmem_cache_free(struct kmem_cache *c, void *b)
{
if (unlikely(c->flags & SLAB_DESTROY_BY_RCU)) {
struct slob_rcu *slob_rcu;
slob_rcu = b + (c->size - sizeof(struct slob_rcu));
INIT_RCU_HEAD(&slob_rcu->head);
slob_rcu->size = c->size;
call_rcu(&slob_rcu->head, kmem_rcu_free);
} else {
__kmem_cache_free(b, c->size);
}
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}
EXPORT_SYMBOL(kmem_cache_free);
unsigned int kmem_cache_size(struct kmem_cache *c)
{
return c->size;
}
EXPORT_SYMBOL(kmem_cache_size);
const char *kmem_cache_name(struct kmem_cache *c)
{
return c->name;
}
EXPORT_SYMBOL(kmem_cache_name);
int kmem_cache_shrink(struct kmem_cache *d)
{
return 0;
}
EXPORT_SYMBOL(kmem_cache_shrink);
int kmem_ptr_validate(struct kmem_cache *a, const void *b)
{
return 0;
}
static unsigned int slob_ready __read_mostly;
int slab_is_available(void)
{
return slob_ready;
}
void __init kmem_cache_init(void)
{
slob_ready = 1;
[PATCH] slob: introduce the SLOB allocator configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:01:45 -07:00
}