kevin/linux
1
Fork 0
Code
167e3d8af9
linux/drivers/regulator/Makefile

44 lines
1.8 KiB
Makefile
Raw Normal View History

regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 09:13:42 -07:00
#
# Makefile for regulator drivers.
#
regulator: Add option for machine drivers to enable the dummy regulator Allow machine drivers to explicitly enable the use of the dummy regulator, enabling simpler support for systems with only a few specific supplies visible to software. It is strongly recommended that this is not used on systems with substantial software control over their PMICs, for maximum functionality constrints should be as fully specified as possible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-05 19:18:32 -07:00
obj-$(CONFIG_REGULATOR) += core.o dummy.o
regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 09:13:42 -07:00
obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
regulator: add userspace-consumer driver The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-26 06:49:39 -07:00
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 09:13:42 -07:00
regulator: new drivers for AD5398 and AD5821 The AD5398 and AD5821 are single 10-bit DAC with 120 mA output current sink capability. They feature an internal reference and operates from a single 2.7 V to 5.5 V supply. This driver supports both the AD5398 and the AD5821. It adapts into the voltage and current framework. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-03 20:46:04 -07:00
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
regulator: TI bq24022 Li-Ion Charger driver This adds a regulator driver for the TI bq24022 Single-Chip Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-07-11 08:28:06 -07:00
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
LP3971 PMIC regulator driver (updated and combined version) This patch adds regulator drivers for National Semiconductors LP3971 PMIC. This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-05-18 22:33:55 -07:00
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
Regulator: LP3972 PMIC regulator driver This patch adds regulator drivers for National Semiconductors LP3972 PMIC. This LP3972 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3972 PMIC controller uses I2C interface. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-16 01:48:49 -07:00
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
Maxim 1586 regulator driver The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-23 11:10:43 -07:00
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
mfd: Rename twl4030* driver files to enable re-use The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 12:05:51 -07:00
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
regulator: enable max8649 regulator driver Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-01-25 08:24:09 -07:00
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
regulator: add driver for MAX8660/8661 Tested with a MX25-based custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-25 00:39:26 -07:00
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
regulator: Add max8925 support MAX8925 contains 3 Buck and 20 LDO regulator. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-11 05:10:08 -07:00
obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
MAX8952 PMIC Driver Initial Release MAX8952 PMIC is used to provide voltage output between 770mV - 1400mV with DVS support. In this initial release, users can set voltages for four DVS modes, RAMP delay values, and SYNC frequency. Controlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID is not supported in this release. If GPIO of EN is not valid in platform data, the driver assumes that it is always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down VID0 and VID1 to fix DVS mode as 0 and disables DVS support. We assume that V_OUT is capable to provide every voltage from 770mV to 1.40V in 10mV steps although the data sheet has some ambiguity on it. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- v2: - Style correction - Can accept platform_data with invalid GPIOs - Removed unnecessary features - Improved error handling Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-19 22:43:56 -07:00
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
drivers: regulator: add Maxim 8998 driver Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> This patch adds voltage regulator driver for Maxim 8998 chip. This chip is used on Samsung Aquila and GONI boards and provides following functionalities: - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power controllers - battery charger This patch adds basic driver for voltage regulators and MAX 8998 MFD core. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-16 00:04:16 -07:00
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
regulator: Add WM831x DC-DC buck convertor support The WM831x series of devices all have 3 DC-DC buck convertors. This driver implements software control for these regulators via the regulator API. Use with split hardware/software control of individual regulators is not supported, though regulators not controlled by software may be controlled via the hardware control interfaces. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-28 07:21:49 -07:00
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
regulator: Add WM831x ISINK support The WM831x series of PMICs provide two constant current sinks designed to drive strings of serially connected LEDs for applications such as backlights. This driver adds support for those regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-28 07:23:46 -07:00
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
regulator: Add WM831x LDO support The WM831x series of devices provide three types of LDO: - General purpose LDOs supporting voltages from 0.9-3.3V - High performance analogue LDOs supporting voltages from 1-3.5V - Very low power consumption LDOs intended to support always on functionality. This patch adds support for all three kinds of LDO. Each regulator is probed as an individual platform device with resources used to provide the register map location of the regulator. Mixed hardware and software control of regulators is not current supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-28 07:22:02 -07:00
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
regulator: Add WM8350 regulator support The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 07:58:15 -07:00
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
regulator: Add WM8400 regulator support The WM8400 provides two programmable DCDC step-down (buck) convertors and four low-dropout (LDO) regulators. This driver provides support for runtime managment of these in the standard regulator API. Support for configuration of the suspend and hibernate mode behaviour of the regulators is not yet included. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-09-11 03:12:01 -07:00
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
regulator: Add WM8994 regulator support The WM8994 contains two LDOs with mixed hardware/software control to minimise the number of external supplies required while delivering optimal voltages to minimise power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-01-25 12:41:57 -07:00
obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
regulator: add TPS6586X regulator driver Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-27 04:03:01 -07:00
obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
da903x: add regulator support for DA9030/DA9034 Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@kernel.org>
2008-08-26 13:16:08 -07:00
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
regulator: PCF50633 pmic driver Changes from V1: - Removed support for suspend_enable & suspend_disable functions. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-08 17:51:01 -07:00
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
regulator: add pcap driver Add (partial) support for the voltage regulators on the PCAP2 PMIC. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-26 20:18:02 -07:00
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
regulator/mc13783: rename source file to match other drivers One annoying thing about the old name was that the module was just called mc13783 which caused wrong expectations (at least for me). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensoruce.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-11-10 01:18:06 -07:00
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
make mc13783 regulator code generic move some common functions and micros of mc13783 regulaor driver to a seperate file, which makes it possible for mc13892 to share code. Signed-off-by: Yong Shen <yong.shen@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13 23:00:54 -07:00
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
regulator: AB3100 support This adds support for the regulators found in the AB3100 Mixed-Signal IC. It further also defines platform data for the ST-Ericsson U300 platform and extends the AB3100 MFD driver so that platform/board data with regulation constraints and an init function can be passed down all the way from the board to the regulators. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-09 02:31:00 -07:00
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
regulator: TI bq24022 Li-Ion Charger driver This adds a regulator driver for the TI bq24022 Single-Chip Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-07-11 08:28:06 -07:00
Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Adding TPS65023 and TPS6507x regulator driver support in drivers/regulator/Makefile and drivers/regulator/Kconfig Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-08-20 12:09:44 -07:00
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
regulator: add driver for tps6524x regulator TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using SPI. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-07 10:04:11 -07:00
obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
regulator: add 88PM8607 PMIC driver Hi Liam, Since Samuel merged a new version of mfd 88pm8607 driver, I format a new patch on regulator 88pm8607. I paste the new patch in mail. Please help to review again. And I also attach the mfd driver in mail. From: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Thu, 8 Oct 2009 09:36:53 -0400 Subject: [PATCH] regulator: Add 88PM8607 PMIC driver This patch adds regulator drivers for Marvell 88PM8607 PMIC. This controller contains 3 DVC and 14 LDO regulators. This controller uses I2C interface. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-10-07 23:03:57 -07:00
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
ISL6271A voltage regulator support. This device is very simple, it supports one buck and two LDOs. The LDOs are fixed-voltage. Only the buck is programable over the I2C bus to 16 possible voltages. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-13 08:25:51 -07:00
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
regulator: add support for regulators on the ab8500 MFD Hi Mark, > I think that's everything. Please find the updated patch set as below. >From f4bf7eec4d210db5075c0bce4521d9be6bc76c8c Mon Sep 17 00:00:00 2001 From: Sundar R Iyer <sundar.iyer@stericsson.com> Date: Sun, 6 Jun 2010 19:12:12 +0530 Subject: [PATCH v3 1/2] regulator: add support for regulators on the ab8500 MFD Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-13 09:18:56 -07:00
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Adding TPS65023 and TPS6507x regulator driver support in drivers/regulator/Makefile and drivers/regulator/Kconfig Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-08-20 12:09:44 -07:00
regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 09:13:42 -07:00
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
Copy Permalink