kevin/neovim
1
Fork 0
mirror of https://github.com/neovim/neovim.git synced 2024-12-20 11:15:14 -07:00
Code Issues Packages Projects Releases Wiki Activity
c45d1e32a9
neovim/runtime/doc/lsp.txt
LW 9fa9b3cad9
docs: support @since for api level #25574 
close #25416
2023-11-27 08:23:04 -08:00

2191 lines
93 KiB
Plaintext
Raw Blame History

*lsp.txt* LSP
NVIM REFERENCE MANUAL
LSP client/framework *lsp* *LSP*
Nvim supports the Language Server Protocol (LSP), which means it acts as
a client to LSP servers and includes a Lua framework `vim.lsp` for building
enhanced LSP tools.
https://microsoft.github.io/language-server-protocol/
LSP facilitates features like go-to-definition, find-references, hover,
completion, rename, format, refactor, etc., using semantic whole-project
analysis (unlike |ctags|).
Type |gO| to see the table of contents.
==============================================================================
QUICKSTART *lsp-quickstart*
Nvim provides an LSP client, but the servers are provided by third parties.
Follow these steps to get LSP features:
1. Install language servers using your package manager or by following the
upstream installation instruction. You can find language servers here:
https://microsoft.github.io/language-server-protocol/implementors/servers/
2. Configure the LSP client per language server. See |vim.lsp.start()| or use
this minimal example as a guide: >lua
vim.lsp.start({
name = 'my-server-name',
cmd = {'name-of-language-server-executable'},
root_dir = vim.fs.dirname(vim.fs.find({'setup.py', 'pyproject.toml'}, { upward = true })[1]),
})
<
3. Check that the server attached to the buffer: >
:lua =vim.lsp.get_clients()
4. Configure keymaps and autocmds to use LSP features. See |lsp-config|.
*lsp-config*
*lsp-defaults*
When the LSP client starts it enables diagnostics |vim.diagnostic| (see
|vim.diagnostic.config()| to customize). It also sets various default options,
listed below, if (1) the language server supports the functionality and (2)
the options are empty or were set by the builtin runtime (ftplugin) files. The
options are not restored when the LSP client is stopped or detached.
- 'omnifunc' is set to |vim.lsp.omnifunc()|, use |i_CTRL-X_CTRL-O| to trigger
completion.
- 'tagfunc' is set to |vim.lsp.tagfunc()|. This enables features like
go-to-definition, |:tjump|, and keymaps like |CTRL-]|, |CTRL-W_]|,
|CTRL-W_}| to utilize the language server.
- 'formatexpr' is set to |vim.lsp.formatexpr()|, so you can format lines via
|gq| if the language server supports it.
- To opt out of this use |gw| instead of gq, or set 'formatexpr' on LspAttach.
- |K| is mapped to |vim.lsp.buf.hover()| unless |'keywordprg'| is customized or
a custom keymap for `K` exists.
*lsp-defaults-disable*
To override the above defaults, set or unset the options on |LspAttach|: >lua
vim.api.nvim_create_autocmd('LspAttach', {
callback = function(ev)
vim.bo[ev.buf].formatexpr = nil
vim.bo[ev.buf].omnifunc = nil
vim.keymap.del("n", "K", { buffer = ev.buf })
end,
})
To use other LSP features like hover, rename, etc. you can set other keymaps
on |LspAttach|. Example: >lua
vim.api.nvim_create_autocmd('LspAttach', {
callback = function(args)
vim.keymap.set('n', 'K', vim.lsp.buf.hover, { buffer = args.buf })
end,
})
The most common functions are:
- |vim.lsp.buf.hover()|
- |vim.lsp.buf.format()|
- |vim.lsp.buf.references()|
- |vim.lsp.buf.implementation()|
- |vim.lsp.buf.code_action()|
Not all language servers provide the same capabilities. To ensure you only set
keymaps if the language server supports a feature, you can guard the keymap
calls behind capability checks:
>lua
vim.api.nvim_create_autocmd('LspAttach', {
callback = function(args)
local client = vim.lsp.get_client_by_id(args.data.client_id)
if client.server_capabilities.hoverProvider then
vim.keymap.set('n', 'K', vim.lsp.buf.hover, { buffer = args.buf })
end
end,
})
<
To learn what capabilities are available you can run the following command in
a buffer with a started LSP client: >vim
:lua =vim.lsp.get_clients()[1].server_capabilities
Full list of features provided by default can be found in |lsp-buf|.
================================================================================
FAQ *lsp-faq*
- Q: How to force-reload LSP?
- A: Stop all clients, then reload the buffer. >vim
:lua vim.lsp.stop_client(vim.lsp.get_clients())
:edit
- Q: Why isn't completion working?
- A: In the buffer where you want to use LSP, check that 'omnifunc' is set to
"v:lua.vim.lsp.omnifunc": `:verbose set omnifunc?`
- Some other plugin may be overriding the option. To avoid that you could
set the option in an |after-directory| ftplugin, e.g.
"after/ftplugin/python.vim".
- Q: How do I run a request synchronously (e.g. for formatting on file save)?
- A: Check if the function has an `async` parameter and set the value to
false. E.g. code formatting: >vim
" Auto-format *.rs (rust) files prior to saving them
" (async = false is the default for format)
autocmd BufWritePre *.rs lua vim.lsp.buf.format({ async = false })
<
*lsp-vs-treesitter*
- Q: How do LSP and Treesitter compare?
- A: LSP requires a client and language server. The language server uses
semantic analysis to understand code at a project level. This provides
language servers with the ability to rename across files, find
definitions in external libraries and more.
Treesitter is a language parsing library that provides excellent tools
for incrementally parsing text and handling errors. This makes it a great
fit for editors to understand the contents of the current file for things
like syntax highlighting, simple goto-definitions, scope analysis and
more.
LSP and Treesitter are both great tools for editing and inspecting code.
================================================================================
LSP API *lsp-api*
LSP core API is described at |lsp-core|. Those are the core functions for
creating and managing clients.
The `vim.lsp.buf_…` functions perform operations for all LSP clients attached
to the given buffer. |lsp-buf|
LSP request/response handlers are implemented as Lua functions (see
|lsp-handler|).
*lsp-method*
Requests and notifications defined by the LSP specification are referred to as
"LSP methods". The Nvim LSP client provides default handlers in the global
|vim.lsp.handlers| table, you can list them with this command: >vim
:lua vim.print(vim.tbl_keys(vim.lsp.handlers))
<
They are also listed below. Note that handlers depend on server support: they
won't run if your server doesn't support them.
- callHierarchy/incomingCalls
- callHierarchy/outgoingCalls
- textDocument/codeAction
- textDocument/completion
- textDocument/declaration*
- textDocument/definition
- textDocument/diagnostic
- textDocument/documentHighlight
- textDocument/documentSymbol
- textDocument/formatting
- textDocument/hover
- textDocument/implementation*
- textDocument/inlayHint
- textDocument/publishDiagnostics
- textDocument/rangeFormatting
- textDocument/references
- textDocument/rename
- textDocument/semanticTokens/full
- textDocument/semanticTokens/full/delta
- textDocument/signatureHelp
- textDocument/typeDefinition*
- window/logMessage
- window/showMessage
- window/showDocument
- window/showMessageRequest
- workspace/applyEdit
- workspace/configuration
- workspace/executeCommand
- workspace/inlayHint/refresh
- workspace/symbol
- workspace/workspaceFolders
*lsp-handler*
LSP handlers are functions that handle |lsp-response|s to requests made by Nvim
to the server. (Notifications, as opposed to requests, are fire-and-forget:
there is no response, so they can't be handled. |lsp-notification|)
Each response handler has this signature: >
function(err, result, ctx, config)
<
Parameters: ~
- {err} (table|nil) Error info dict, or `nil` if the request
completed.
- {result} (Result | Params | nil) `result` key of the |lsp-response| or
`nil` if the request failed.
- {ctx} (table) Table of calling state associated with the
handler, with these keys:
- {method} (string) |lsp-method| name.
- {client_id} (number) |vim.lsp.client| identifier.
- {bufnr} (Buffer) Buffer handle.
- {params} (table|nil) Request parameters table.
- {version} (number) Document version at time of
request. Handlers can compare this to the
current document version to check if the
response is "stale". See also |b:changedtick|.
- {config} (table) Handler-defined configuration table, which allows
users to customize handler behavior.
For an example, see:
|vim.lsp.diagnostic.on_publish_diagnostics()|
To configure a particular |lsp-handler|, see:
|lsp-handler-configuration|
Returns: ~
Two values `result, err` where `err` is shaped like an RPC error: >
{ code, message, data? }
< You can use |vim.lsp.rpc.rpc_response_error()| to create this object.
*lsp-handler-configuration*
To configure the behavior of a builtin |lsp-handler|, the convenient method
|vim.lsp.with()| is provided for users.
To configure the behavior of |vim.lsp.diagnostic.on_publish_diagnostics()|,
consider the following example, where a new |lsp-handler| is created using
|vim.lsp.with()| that no longer generates signs for the diagnostics: >lua
vim.lsp.handlers["textDocument/publishDiagnostics"] = vim.lsp.with(
vim.lsp.diagnostic.on_publish_diagnostics, {
-- Disable signs
signs = false,
}
)
<
To enable signs, use |vim.lsp.with()| again to create and assign a new
|lsp-handler| to |vim.lsp.handlers| for the associated method: >lua
vim.lsp.handlers["textDocument/publishDiagnostics"] = vim.lsp.with(
vim.lsp.diagnostic.on_publish_diagnostics, {
-- Enable signs
signs = true,
}
)
<
To configure a handler on a per-server basis, you can use the {handlers} key
for |vim.lsp.start_client()| >lua
vim.lsp.start_client {
..., -- Other configuration omitted.
handlers = {
["textDocument/publishDiagnostics"] = vim.lsp.with(
vim.lsp.diagnostic.on_publish_diagnostics, {
-- Disable virtual_text
virtual_text = false,
}
),
},
}
<
or if using "nvim-lspconfig", you can use the {handlers} key of `setup()`:
>lua
require('lspconfig').rust_analyzer.setup {
handlers = {
["textDocument/publishDiagnostics"] = vim.lsp.with(
vim.lsp.diagnostic.on_publish_diagnostics, {
-- Disable virtual_text
virtual_text = false
}
),
}
}
<
Some handlers do not have an explicitly named handler function (such as
||vim.lsp.diagnostic.on_publish_diagnostics()|). To override these, first
create a reference to the existing handler: >lua
local on_references = vim.lsp.handlers["textDocument/references"]
vim.lsp.handlers["textDocument/references"] = vim.lsp.with(
on_references, {
-- Use location list instead of quickfix list
loclist = true,
}
)
<
*lsp-handler-resolution*
Handlers can be set by:
- Setting a field in vim.lsp.handlers. *vim.lsp.handlers*
vim.lsp.handlers is a global table that contains the default mapping of
|lsp-method| names to |lsp-handlers|. To override the handler for the
`"textDocument/definition"` method: >lua
vim.lsp.handlers["textDocument/definition"] = my_custom_default_definition
<
- The {handlers} parameter of |vim.lsp.start()|. This sets the default
|lsp-handler| for the server being started. Example: >lua
vim.lsp.start {
..., -- Other configuration omitted.
handlers = {
["textDocument/definition"] = my_custom_server_definition
},
}
- The {handler} parameter of |vim.lsp.buf_request_all()|. This sets
the |lsp-handler| ONLY for the given request(s). Example: >lua
vim.lsp.buf_request_all(
0,
"textDocument/definition",
my_request_params,
my_handler
)
<
In summary, the |lsp-handler| will be chosen based on the current |lsp-method|
in the following order:
1. Handler passed to |vim.lsp.buf_request_all()|, if any.
2. Handler defined in |vim.lsp.start()|, if any.
3. Handler defined in |vim.lsp.handlers|, if any.
*vim.lsp.log_levels*
Log levels are defined in |vim.log.levels|
VIM.LSP.PROTOCOL *vim.lsp.protocol*
Module `vim.lsp.protocol` defines constants dictated by the LSP specification,
and helper functions for creating protocol-related objects.
https://github.com/microsoft/language-server-protocol/raw/gh-pages/_specifications/specification-3-14.md
For example `vim.lsp.protocol.ErrorCodes` allows reverse lookup by number or
name: >lua
vim.lsp.protocol.TextDocumentSyncKind.Full == 1
vim.lsp.protocol.TextDocumentSyncKind[1] == "Full"
<
*lsp-response*
LSP response shape:
https://microsoft.github.io/language-server-protocol/specifications/specification-current/#responseMessage
*lsp-notification*
LSP notification shape:
https://microsoft.github.io/language-server-protocol/specifications/specification-current/#notificationMessage
*lsp-on-list-handler*
`on_list` receives a table with:
- `items` table[], structured like |setqflist-what|
- `title` string, title for the list.
- `context` table|nil. `ctx` from |lsp-handler|
This table can be used with vim.fn.setqflist or vim.fn.setloclist. E.g.:
>lua
local function on_list(options)
vim.fn.setqflist({}, ' ', options)
vim.api.nvim_command('cfirst')
end
vim.lsp.buf.definition{on_list=on_list}
vim.lsp.buf.references(nil, {on_list=on_list})
<
If you prefer loclist do something like this:
>lua
local function on_list(options)
vim.fn.setloclist(0, {}, ' ', options)
vim.api.nvim_command('lopen')
end
<
================================================================================
LSP HIGHLIGHT *lsp-highlight*
Reference Highlights:
Highlight groups that are meant to be used by |vim.lsp.buf.document_highlight()|.
You can see more about the differences in types here:
https://microsoft.github.io/language-server-protocol/specification#textDocument_documentHighlight
*hl-LspReferenceText*
LspReferenceText used for highlighting "text" references
*hl-LspReferenceRead*
LspReferenceRead used for highlighting "read" references
*hl-LspReferenceWrite*
LspReferenceWrite used for highlighting "write" references
*hl-LspInlayHint*
LspInlayHint used for highlighting inlay hints
*lsp-highlight-codelens*
Highlight groups related to |lsp-codelens| functionality.
*hl-LspCodeLens*
LspCodeLens
Used to color the virtual text of the codelens. See
|nvim_buf_set_extmark()|.
LspCodeLensSeparator *hl-LspCodeLensSeparator*
Used to color the separator between two or more code lenses.
*lsp-highlight-signature*
Highlight groups related to |vim.lsp.handlers.signature_help()|.
*hl-LspSignatureActiveParameter*
LspSignatureActiveParameter
Used to highlight the active parameter in the signature help. See
|vim.lsp.handlers.signature_help()|.
------------------------------------------------------------------------------
LSP SEMANTIC HIGHLIGHTS *lsp-semantic-highlight*
When available, the LSP client highlights code using |lsp-semantic_tokens|,
which are another way that LSP servers can provide information about source
code. Note that this is in addition to treesitter syntax highlighting;
semantic highlighting does not replace syntax highlighting.
The server will typically provide one token per identifier in the source code.
The token will have a `type` such as "function" or "variable", and 0 or more
`modifier`s such as "readonly" or "deprecated." The standard types and
modifiers are described here:
https://microsoft.github.io/language-server-protocol/specification/#textDocument_semanticTokens
LSP servers may also use off-spec types and modifiers.
The LSP client adds one or more highlights for each token. The highlight
groups are derived from the token's type and modifiers:
• `@lsp.type.<type>.<ft>` for the type
• `@lsp.mod.<mod>.<ft>` for each modifier
• `@lsp.typemod.<type>.<mod>.<ft>` for each modifier
Use |:Inspect| to view the highlights for a specific token. Use |:hi| or
|nvim_set_hl()| to change the appearance of semantic highlights: >vim
hi @lsp.type.function guifg=Yellow " function names are yellow
hi @lsp.type.variable.lua guifg=Green " variables in lua are green
hi @lsp.mod.deprecated gui=strikethrough " deprecated is crossed out
hi @lsp.typemod.function.async guifg=Blue " async functions are blue
<
The value |vim.highlight.priorities|`.semantic_tokens` is the priority of the
`@lsp.type.*` highlights. The `@lsp.mod.*` and `@lsp.typemod.*` highlights
have priorities one and two higher, respectively.
You can disable semantic highlights by clearing the highlight groups: >lua
-- Hide semantic highlights for functions
vim.api.nvim_set_hl(0, '@lsp.type.function', {})
-- Hide all semantic highlights
for _, group in ipairs(vim.fn.getcompletion("@lsp", "highlight")) do
vim.api.nvim_set_hl(0, group, {})
end
<
You probably want these inside a |ColorScheme| autocommand.
Use |LspTokenUpdate| and |vim.lsp.semantic_tokens.highlight_token()| for more
complex highlighting.
The following groups are linked by default to standard |group-name|s:
>
@lsp.type.class Structure
@lsp.type.decorator Function
@lsp.type.enum Structure
@lsp.type.enumMember Constant
@lsp.type.function Function
@lsp.type.interface Structure
@lsp.type.macro Macro
@lsp.type.method Function
@lsp.type.namespace Structure
@lsp.type.parameter Identifier
@lsp.type.property Identifier
@lsp.type.struct Structure
@lsp.type.type Type
@lsp.type.typeParameter TypeDef
@lsp.type.variable Identifier
<
==============================================================================
EVENTS *lsp-events*
LspAttach *LspAttach*
After an LSP client attaches to a buffer. The |autocmd-pattern| is the
name of the buffer. When used from Lua, the client ID is passed to the
callback in the "data" table. Example: >lua
vim.api.nvim_create_autocmd("LspAttach", {
callback = function(args)
local bufnr = args.buf
local client = vim.lsp.get_client_by_id(args.data.client_id)
if client.server_capabilities.completionProvider then
vim.bo[bufnr].omnifunc = "v:lua.vim.lsp.omnifunc"
end
if client.server_capabilities.definitionProvider then
vim.bo[bufnr].tagfunc = "v:lua.vim.lsp.tagfunc"
end
end,
})
<
LspDetach *LspDetach*
Just before an LSP client detaches from a buffer. The |autocmd-pattern|
is the name of the buffer. When used from Lua, the client ID is passed
to the callback in the "data" table. Example: >lua
vim.api.nvim_create_autocmd("LspDetach", {
callback = function(args)
local client = vim.lsp.get_client_by_id(args.data.client_id)
-- Do something with the client
vim.cmd("setlocal tagfunc< omnifunc<")
end,
})
<
LspNotify *LspNotify*
This event is triggered after each successful notification sent to an
LSP server.
When used from Lua, the client_id, LSP method, and parameters are sent
in the "data" table. Example: >lua
vim.api.nvim_create_autocmd('LspNotify', {
callback = function(args)
local bufnr = args.buf
local client_id = args.data.client_id
local method = args.data.method
local params = args.data.params
-- do something with the notification
if method == 'textDocument/...' then
update_buffer(bufnr)
end
end,
})
<
LspProgress *LspProgress*
Upon receipt of a progress notification from the server. Notifications can
be polled from a `progress` ring buffer of a |vim.lsp.client| or use
|vim.lsp.status()| to get an aggregate message
If the server sends a "work done progress", the `pattern` is set to `kind`
(one of `begin`, `report` or `end`).
When used from Lua, the event contains a `data` table with `client_id` and
`result` properties. `result` will contain the request params sent by the
server.
Example: >vim
autocmd LspProgress * redrawstatus
<
LspRequest *LspRequest*
For each request sent to an LSP server, this event is triggered for
every change to the request's status. The status can be one of
`pending`, `complete`, or `cancel` and is sent as the {type} on the
"data" table passed to the callback function.
It triggers when the initial request is sent ({type} == `pending`) and
when the LSP server responds ({type} == `complete`). If a cancellation
is requested using `client.cancel_request(request_id)`, then this event
will trigger with {type} == `cancel`.
When used from Lua, the client ID, request ID, and request are sent in
the "data" table. See {requests} in |vim.lsp.client| for details on the
{request} value. If the request type is `complete`, the request will be
deleted from the client's pending requests table immediately after
calling the event's callbacks. Example: >lua
vim.api.nvim_create_autocmd('LspRequest', {
callback = function(args)
local bufnr = args.buf
local client_id = args.data.client_id
local request_id = args.data.request_id
local request = args.data.request
if request.type == 'pending' then
-- do something with pending requests
track_pending(client_id, bufnr, request_id, request)
elseif request.type == 'cancel' then
-- do something with pending cancel requests
track_canceling(client_id, bufnr, request_id, request)
elseif request.type == 'complete' then
-- do something with finished requests. this pending
-- request entry is about to be removed since it is complete
track_finish(client_id, bufnr, request_id, request)
end
end,
})
<
LspTokenUpdate *LspTokenUpdate*
When a visible semantic token is sent or updated by the LSP server, or
when an existing token becomes visible for the first time. The
|autocmd-pattern| is the name of the buffer. When used from Lua, the
token and client ID are passed to the callback in the "data" table. The
token fields are documented in |vim.lsp.semantic_tokens.get_at_pos()|.
Example:
>lua
vim.api.nvim_create_autocmd('LspTokenUpdate', {
callback = function(args)
local token = args.data.token
if token.type == 'variable' and not token.modifiers.readonly then
vim.lsp.semantic_tokens.highlight_token(
token, args.buf, args.data.client_id, 'MyMutableVariableHighlight'
)
end
end,
})
<
Note: doing anything other than calling
|vim.lsp.semantic_tokens.highlight_token()| is considered experimental.
==============================================================================
Lua module: vim.lsp *lsp-core*
buf_attach_client({bufnr}, {client_id}) *vim.lsp.buf_attach_client()*
Implements the `textDocument/did…` notifications required to track a
buffer for any language server.
Without calling this, the server won't be notified of changes to a buffer.
Parameters: ~
• {bufnr} (integer) Buffer handle, or 0 for current
• {client_id} (integer) Client id
Return: ~
(boolean) success `true` if client was attached successfully; `false`
otherwise
buf_detach_client({bufnr}, {client_id}) *vim.lsp.buf_detach_client()*
Detaches client from the specified buffer. Note: While the server is
notified that the text document (buffer) was closed, it is still able to
send notifications should it ignore this notification.
Parameters: ~
• {bufnr} (integer) Buffer handle, or 0 for current
• {client_id} (integer) Client id
buf_is_attached({bufnr}, {client_id}) *vim.lsp.buf_is_attached()*
Checks if a buffer is attached for a particular client.
Parameters: ~
• {bufnr} (integer) Buffer handle, or 0 for current
• {client_id} (integer) the client id
buf_notify({bufnr}, {method}, {params}) *vim.lsp.buf_notify()*
Send a notification to a server
Parameters: ~
• {bufnr} (integer|nil) The number of the buffer
• {method} (string) Name of the request method
• {params} (any) Arguments to send to the server
Return: ~
(boolean) success true if any client returns true; false otherwise
*vim.lsp.buf_request_all()*
buf_request_all({bufnr}, {method}, {params}, {handler})
Sends an async request for all active clients attached to the buffer and
executes the `handler` callback with the combined result.
Parameters: ~
• {bufnr} (integer) Buffer handle, or 0 for current.
• {method} (string) LSP method name
• {params} (table|nil) Parameters to send to the server
• {handler} (function) Handler called after all requests are completed.
Server results are passed as a `client_id:result` map.
Return: ~
(function) cancel Function that cancels all requests.
*vim.lsp.buf_request_sync()*
buf_request_sync({bufnr}, {method}, {params}, {timeout_ms})
Sends a request to all server and waits for the response of all of them.
Calls |vim.lsp.buf_request_all()| but blocks Nvim while awaiting the
result. Parameters are the same as |vim.lsp.buf_request_all()| but the
result is different. Waits a maximum of {timeout_ms} (default 1000) ms.
Parameters: ~
• {bufnr} (integer) Buffer handle, or 0 for current.
• {method} (string) LSP method name
• {params} (table|nil) Parameters to send to the server
• {timeout_ms} (integer|nil) Maximum time in milliseconds to wait for a
result. Defaults to 1000
Return (multiple): ~
(table) result Map of client_id:request_result.
(string|nil) err On timeout, cancel, or error, `err` is a string
describing the failure reason, and `result` is nil.
client() *vim.lsp.client*
LSP client object. You can get an active client object via
|vim.lsp.get_client_by_id()| or |vim.lsp.get_clients()|.
• Methods:
• request(method, params, [handler], bufnr) Sends a request to the
server. This is a thin wrapper around {client.rpc.request} with some
additional checking. If {handler} is not specified, If one is not
found there, then an error will occur. Returns: {status},
{[client_id]}. {status} is a boolean indicating if the notification
was successful. If it is `false`, then it will always be `false` (the
client has shutdown). If {status} is `true`, the function returns
{request_id} as the second result. You can use this with
`client.cancel_request(request_id)` to cancel the request.
• request_sync(method, params, timeout_ms, bufnr) Sends a request to the
server and synchronously waits for the response. This is a wrapper
around {client.request} Returns: { err=err, result=result }, a
dictionary, where `err` and `result` come from the |lsp-handler|. On
timeout, cancel or error, returns `(nil, err)` where `err` is a string
describing the failure reason. If the request was unsuccessful returns
`nil`.
• notify(method, params) Sends a notification to an LSP server. Returns:
a boolean to indicate if the notification was successful. If it is
false, then it will always be false (the client has shutdown).
• cancel_request(id) Cancels a request with a given request id. Returns:
same as `notify()`.
• stop([force]) Stops a client, optionally with force. By default, it
will just ask the server to shutdown without force. If you request to
stop a client which has previously been requested to shutdown, it will
automatically escalate and force shutdown.
• is_stopped() Checks whether a client is stopped. Returns: true if the
client is fully stopped.
• on_attach(client, bufnr) Runs the on_attach function from the client's
config if it was defined. Useful for buffer-local setup.
• Members
• {id} (number): The id allocated to the client.
• {name} (string): If a name is specified on creation, that will be
used. Otherwise it is just the client id. This is used for logs and
messages.
• {rpc} (table): RPC client object, for low level interaction with the
client. See |vim.lsp.rpc.start()|.
• {offset_encoding} (string): The encoding used for communicating with
the server. You can modify this in the `config`'s `on_init` method
before text is sent to the server.
• {handlers} (table): The handlers used by the client as described in
|lsp-handler|.
• {requests} (table): The current pending requests in flight to the
server. Entries are key-value pairs with the key being the request ID
while the value is a table with `type`, `bufnr`, and `method`
key-value pairs. `type` is either "pending" for an active request, or
"cancel" for a cancel request. It will be "complete" ephemerally while
executing |LspRequest| autocmds when replies are received from the
server.
• {config} (table): copy of the table that was passed by the user to
|vim.lsp.start_client()|.
• {server_capabilities} (table): Response from the server sent on
`initialize` describing the server's capabilities.
• {progress} A ring buffer (|vim.ringbuf()|) containing progress
messages sent by the server.
client_is_stopped({client_id}) *vim.lsp.client_is_stopped()*
Checks whether a client is stopped.
Parameters: ~
• {client_id} (integer)
Return: ~
(boolean) stopped true if client is stopped, false otherwise.
commands *vim.lsp.commands*
Registry for client side commands. This is an extension point for plugins
to handle custom commands which are not part of the core language server
protocol specification.
The registry is a table where the key is a unique command name, and the
value is a function which is called if any LSP action (code action, code
lenses, ...) triggers the command.
If a LSP response contains a command for which no matching entry is
available in this registry, the command will be executed via the LSP
server using `workspace/executeCommand`.
The first argument to the function will be the `Command`: Command title:
String command: String arguments?: any[]
The second argument is the `ctx` of |lsp-handler|
formatexpr({opts}) *vim.lsp.formatexpr()*
Provides an interface between the built-in client and a `formatexpr`
function.
Currently only supports a single client. This can be set via `setlocal
formatexpr=v:lua.vim.lsp.formatexpr()` but will typically or in
`on_attach` via `vim.bo[bufnr].formatexpr =
'v:lua.vim.lsp.formatexpr(#{timeout_ms:250})'`.
Parameters: ~
• {opts} (table) options for customizing the formatting expression
which takes the following optional keys:
• timeout_ms (default 500ms). The timeout period for the
formatting request.
*vim.lsp.get_buffers_by_client_id()*
get_buffers_by_client_id({client_id})
Returns list of buffers attached to client_id.
Parameters: ~
• {client_id} (integer) client id
Return: ~
integer[] buffers list of buffer ids
get_client_by_id({client_id}) *vim.lsp.get_client_by_id()*
Gets a client by id, or nil if the id is invalid. The returned client may
not yet be fully initialized.
Parameters: ~
• {client_id} (integer) client id
Return: ~
(nil|lsp.Client) client rpc object
get_clients({filter}) *vim.lsp.get_clients()*
Get active clients.
Parameters: ~
• {filter} (table|nil) A table with key-value pairs used to filter the
returned clients. The available keys are:
• id (number): Only return clients with the given id
• bufnr (number): Only return clients attached to this
buffer
• name (string): Only return clients with the given name
• method (string): Only return clients supporting the given
method
Return: ~
lsp.Client []: List of |vim.lsp.client| objects
get_log_path() *vim.lsp.get_log_path()*
Gets the path of the logfile used by the LSP client.
Return: ~
(string) path to log file
omnifunc({findstart}, {base}) *vim.lsp.omnifunc()*
Implements 'omnifunc' compatible LSP completion.
Parameters: ~
• {findstart} (integer) 0 or 1, decides behavior
• {base} (integer) findstart=0, text to match against
Return: ~
integer|table Decided by {findstart}:
• findstart=0: column where the completion starts, or -2 or -3
• findstart=1: list of matches (actually just calls |complete()|)
See also: ~
• |complete-functions|
• |complete-items|
• |CompleteDone|
set_log_level({level}) *vim.lsp.set_log_level()*
Sets the global log level for LSP logging.
Levels by name: "TRACE", "DEBUG", "INFO", "WARN", "ERROR", "OFF"
Level numbers begin with "TRACE" at 0
Use `lsp.log_levels` for reverse lookup.
Parameters: ~
• {level} (integer|string) the case insensitive level name or number
See also: ~
• |vim.lsp.log_levels|
start({config}, {opts}) *vim.lsp.start()*
Create a new LSP client and start a language server or reuses an already
running client if one is found matching `name` and `root_dir`. Attaches
the current buffer to the client.
Example: >lua
vim.lsp.start({
name = 'my-server-name',
cmd = {'name-of-language-server-executable'},
root_dir = vim.fs.dirname(vim.fs.find({'pyproject.toml', 'setup.py'}, { upward = true })[1]),
})
<
See |vim.lsp.start_client()| for all available options. The most important
are:
• `name` arbitrary name for the LSP client. Should be unique per language
server.
• `cmd` command (in list form) used to start the language server. Must be
absolute, or found on `$PATH`. Shell constructs like `~` are not
expanded.
• `root_dir` path to the project root. By default this is used to decide
if an existing client should be re-used. The example above uses
|vim.fs.find()| and |vim.fs.dirname()| to detect the root by traversing
the file system upwards starting from the current directory until either
a `pyproject.toml` or `setup.py` file is found.
• `workspace_folders` list of `{ uri:string, name: string }` tables
specifying the project root folders used by the language server. If
`nil` the property is derived from `root_dir` for convenience.
Language servers use this information to discover metadata like the
dependencies of your project and they tend to index the contents within
the project folder.
To ensure a language server is only started for languages it can handle,
make sure to call |vim.lsp.start()| within a |FileType| autocmd. Either
use |:au|, |nvim_create_autocmd()| or put the call in a
`ftplugin/<filetype_name>.lua` (See |ftplugin-name|)
Parameters: ~
• {config} (table) Same configuration as documented in
|vim.lsp.start_client()|
• {opts} (nil|lsp.StartOpts) Optional keyword arguments:
• reuse_client (fun(client: client, config: table): boolean)
Predicate used to decide if a client should be re-used.
Used on all running clients. The default implementation
re-uses a client if name and root_dir matches.
• bufnr (number) Buffer handle to attach to if starting or
re-using a client (0 for current).
Return: ~
(integer|nil) client_id
start_client({config}) *vim.lsp.start_client()*
Starts and initializes a client with the given configuration.
Field `cmd` in {config} is required.
Parameters: ~
• {config} ( lsp.ClientConfig ) Configuration for the server:
• cmd: (string[]|fun(dispatchers: table):table) command a
list of strings treated like |jobstart()|. The command
must launch the language server process. `cmd` can also be
a function that creates an RPC client. The function
receives a dispatchers table and must return a table with
the functions `request`, `notify`, `is_closing` and
`terminate` See |vim.lsp.rpc.request()| and
|vim.lsp.rpc.notify()| For TCP there is a built-in rpc
client factory: |vim.lsp.rpc.connect()|
• cmd_cwd: (string, default=|getcwd()|) Directory to launch
the `cmd` process. Not related to `root_dir`.
• cmd_env: (table) Environment flags to pass to the LSP on
spawn. Must be specified using a table. Non-string values
are coerced to string. Example: >
{ PORT = 8080; HOST = "0.0.0.0"; }
<
• detached: (boolean, default true) Daemonize the server
process so that it runs in a separate process group from
Nvim. Nvim will shutdown the process on exit, but if Nvim
fails to exit cleanly this could leave behind orphaned
server processes.
• workspace_folders: (table) List of workspace folders
passed to the language server. For backwards compatibility
rootUri and rootPath will be derived from the first
workspace folder in this list. See `workspaceFolders` in
the LSP spec.
• capabilities: Map overriding the default capabilities
defined by |vim.lsp.protocol.make_client_capabilities()|,
passed to the language server on initialization. Hint: use
make_client_capabilities() and modify its result.
• Note: To send an empty dictionary use
|vim.empty_dict()|, else it will be encoded as an array.
• handlers: Map of language server method names to
|lsp-handler|
• settings: Map with language server specific settings.
These are returned to the language server if requested via
`workspace/configuration`. Keys are case-sensitive.
• commands: table Table that maps string of clientside
commands to user-defined functions. Commands passed to
start_client take precedence over the global command
registry. Each key must be a unique command name, and the
value is a function which is called if any LSP action
(code action, code lenses, ...) triggers the command.
• init_options Values to pass in the initialization request
as `initializationOptions`. See `initialize` in the LSP
spec.
• name: (string, default=client-id) Name in log messages.
• get_language_id: function(bufnr, filetype) -> language ID
as string. Defaults to the filetype.
• offset_encoding: (default="utf-16") One of "utf-8",
"utf-16", or "utf-32" which is the encoding that the LSP
server expects. Client does not verify this is correct.
• on_error: Callback with parameters (code, ...), invoked
when the client operation throws an error. `code` is a
number describing the error. Other arguments may be passed
depending on the error kind. See
`vim.lsp.rpc.client_errors` for possible errors. Use
`vim.lsp.rpc.client_errors[code]` to get human-friendly
name.
• before_init: Callback with parameters (initialize_params,
config) invoked before the LSP "initialize" phase, where
`params` contains the parameters being sent to the server
and `config` is the config that was passed to
|vim.lsp.start_client()|. You can use this to modify
parameters before they are sent.
• on_init: Callback (client, initialize_result) invoked
after LSP "initialize", where `result` is a table of
`capabilities` and anything else the server may send. For
example, clangd sends `initialize_result.offsetEncoding`
if `capabilities.offsetEncoding` was sent to it. You can
only modify the `client.offset_encoding` here before any
notifications are sent. Most language servers expect to be
sent client specified settings after initialization. Nvim
does not make this assumption. A
`workspace/didChangeConfiguration` notification should be
sent to the server during on_init.
• on_exit Callback (code, signal, client_id) invoked on
client exit.
• code: exit code of the process
• signal: number describing the signal used to terminate
(if any)
• client_id: client handle
• on_attach: Callback (client, bufnr) invoked when client
attaches to a buffer.
• trace: ("off" | "messages" | "verbose" | nil) passed
directly to the language server in the initialize request.
Invalid/empty values will default to "off"
• flags: A table with flags for the client. The current
(experimental) flags are:
• allow_incremental_sync (bool, default true): Allow using
incremental sync for buffer edits
• debounce_text_changes (number, default 150): Debounce
didChange notifications to the server by the given
number in milliseconds. No debounce occurs if nil
• exit_timeout (number|boolean, default false):
Milliseconds to wait for server to exit cleanly after
sending the "shutdown" request before sending kill -15.
If set to false, nvim exits immediately after sending
the "shutdown" request to the server.
• root_dir: (string) Directory where the LSP server will
base its workspaceFolders, rootUri, and rootPath on
initialization.
Return: ~
(integer|nil) client_id. |vim.lsp.get_client_by_id()| Note: client may
not be fully initialized. Use `on_init` to do any actions once the
client has been initialized.
status() *vim.lsp.status()*
Consumes the latest progress messages from all clients and formats them as
a string. Empty if there are no clients or if no new messages
Return: ~
(string)
stop_client({client_id}, {force}) *vim.lsp.stop_client()*
Stops a client(s).
You can also use the `stop()` function on a |vim.lsp.client| object. To
stop all clients: >lua
vim.lsp.stop_client(vim.lsp.get_clients())
<
By default asks the server to shutdown, unless stop was requested already
for this client, then force-shutdown is attempted.
Parameters: ~
• {client_id} integer|table id or |vim.lsp.client| object, or list
thereof
• {force} (boolean|nil) shutdown forcefully
tagfunc({pattern}, {flags}) *vim.lsp.tagfunc()*
Provides an interface between the built-in client and 'tagfunc'.
When used with normal mode commands (e.g. |CTRL-]|) this will invoke the
"textDocument/definition" LSP method to find the tag under the cursor.
Otherwise, uses "workspace/symbol". If no results are returned from any
LSP servers, falls back to using built-in tags.
Parameters: ~
• {pattern} (string) Pattern used to find a workspace symbol
• {flags} (string) See |tag-function|
Return: ~
table[] tags A list of matching tags
with({handler}, {override_config}) *vim.lsp.with()*
Function to manage overriding defaults for LSP handlers.
Parameters: ~
• {handler} (function) See |lsp-handler|
• {override_config} (table) Table containing the keys to override
behavior of the {handler}
==============================================================================
Lua module: vim.lsp.buf *lsp-buf*
*vim.lsp.buf.add_workspace_folder()*
add_workspace_folder({workspace_folder})
Add the folder at path to the workspace folders. If {path} is not
provided, the user will be prompted for a path using |input()|.
clear_references() *vim.lsp.buf.clear_references()*
Removes document highlights from current buffer.
code_action({options}) *vim.lsp.buf.code_action()*
Selects a code action available at the current cursor position.
Parameters: ~
• {options} (table|nil) Optional table which holds the following
optional fields:
• context: (table|nil) Corresponds to `CodeActionContext` of the LSP specification:
• diagnostics (table|nil): LSP `Diagnostic[]`. Inferred
from the current position if not provided.
• only (table|nil): List of LSP `CodeActionKind`s used to
filter the code actions. Most language servers support
values like `refactor` or `quickfix`.
• triggerKind (number|nil): The reason why code actions
were requested.
• filter: (function|nil) Predicate taking an `CodeAction`
and returning a boolean.
• apply: (boolean|nil) When set to `true`, and there is
just one remaining action (after filtering), the action
is applied without user query.
• range: (table|nil) Range for which code actions should be
requested. If in visual mode this defaults to the active
selection. Table must contain `start` and `end` keys with
{row,col} tuples using mark-like indexing. See
|api-indexing|
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocument_codeAction
• vim.lsp.protocol.CodeActionTriggerKind
completion({context}) *vim.lsp.buf.completion()*
Retrieves the completion items at the current cursor position. Can only be
called in Insert mode.
Parameters: ~
• {context} (table) (context support not yet implemented) Additional
information about the context in which a completion was
triggered (how it was triggered, and by which trigger
character, if applicable)
See also: ~
• vim.lsp.protocol.CompletionTriggerKind
declaration({options}) *vim.lsp.buf.declaration()*
Jumps to the declaration of the symbol under the cursor.
Note: ~
• Many servers do not implement this method. Generally, see
|vim.lsp.buf.definition()| instead.
Parameters: ~
• {options} (table|nil) additional options
• reuse_win: (boolean) Jump to existing window if buffer is
already open.
• on_list: (function) |lsp-on-list-handler| replacing the
default handler. Called for any non-empty result.
definition({options}) *vim.lsp.buf.definition()*
Jumps to the definition of the symbol under the cursor.
Parameters: ~
• {options} (table|nil) additional options
• reuse_win: (boolean) Jump to existing window if buffer is
already open.
• on_list: (function) |lsp-on-list-handler| replacing the
default handler. Called for any non-empty result.
document_highlight() *vim.lsp.buf.document_highlight()*
Send request to the server to resolve document highlights for the current
text document position. This request can be triggered by a key mapping or
by events such as `CursorHold`, e.g.: >vim
autocmd CursorHold <buffer> lua vim.lsp.buf.document_highlight()
autocmd CursorHoldI <buffer> lua vim.lsp.buf.document_highlight()
autocmd CursorMoved <buffer> lua vim.lsp.buf.clear_references()
<
Note: Usage of |vim.lsp.buf.document_highlight()| requires the following
highlight groups to be defined or you won't be able to see the actual
highlights. |hl-LspReferenceText| |hl-LspReferenceRead|
|hl-LspReferenceWrite|
document_symbol({options}) *vim.lsp.buf.document_symbol()*
Lists all symbols in the current buffer in the quickfix window.
Parameters: ~
• {options} (table|nil) additional options
• on_list: (function) handler for list results. See
|lsp-on-list-handler|
execute_command({command_params}) *vim.lsp.buf.execute_command()*
Executes an LSP server command.
Parameters: ~
• {command_params} (table) A valid `ExecuteCommandParams` object
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#workspace_executeCommand
format({options}) *vim.lsp.buf.format()*
Formats a buffer using the attached (and optionally filtered) language
server clients.
Parameters: ~
• {options} (table|nil) Optional table which holds the following
optional fields:
• formatting_options (table|nil): Can be used to specify
FormattingOptions. Some unspecified options will be
automatically derived from the current Nvim options. See https://microsoft.github.io/language-server-protocol/specification/#formattingOptions
• timeout_ms (integer|nil, default 1000): Time in
milliseconds to block for formatting requests. No effect
if async=true
• bufnr (number|nil): Restrict formatting to the clients
attached to the given buffer, defaults to the current
buffer (0).
• filter (function|nil): Predicate used to filter clients.
Receives a client as argument and must return a boolean.
Clients matching the predicate are included. Example: >lua
-- Never request typescript-language-server for formatting
vim.lsp.buf.format {
filter = function(client) return client.name ~= "tsserver" end
}
<
• async boolean|nil If true the method won't block.
Defaults to false. Editing the buffer while formatting
asynchronous can lead to unexpected changes.
• id (number|nil): Restrict formatting to the client with
ID (client.id) matching this field.
• name (string|nil): Restrict formatting to the client with
name (client.name) matching this field.
• range (table|nil) Range to format. Table must contain
`start` and `end` keys with {row,col} tuples using (1,0)
indexing. Defaults to current selection in visual mode
Defaults to `nil` in other modes, formatting the full
buffer
hover() *vim.lsp.buf.hover()*
Displays hover information about the symbol under the cursor in a floating
window. Calling the function twice will jump into the floating window.
implementation({options}) *vim.lsp.buf.implementation()*
Lists all the implementations for the symbol under the cursor in the
quickfix window.
Parameters: ~
• {options} (table|nil) additional options
• on_list: (function) |lsp-on-list-handler| replacing the
default handler. Called for any non-empty result.
incoming_calls() *vim.lsp.buf.incoming_calls()*
Lists all the call sites of the symbol under the cursor in the |quickfix|
window. If the symbol can resolve to multiple items, the user can pick one
in the |inputlist()|.
list_workspace_folders() *vim.lsp.buf.list_workspace_folders()*
List workspace folders.
outgoing_calls() *vim.lsp.buf.outgoing_calls()*
Lists all the items that are called by the symbol under the cursor in the
|quickfix| window. If the symbol can resolve to multiple items, the user
can pick one in the |inputlist()|.
references({context}, {options}) *vim.lsp.buf.references()*
Lists all the references to the symbol under the cursor in the quickfix
window.
Parameters: ~
• {context} (table|nil) Context for the request
• {options} (table|nil) additional options
• on_list: (function) handler for list results. See
|lsp-on-list-handler|
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocument_references
*vim.lsp.buf.remove_workspace_folder()*
remove_workspace_folder({workspace_folder})
Remove the folder at path from the workspace folders. If {path} is not
provided, the user will be prompted for a path using |input()|.
rename({new_name}, {options}) *vim.lsp.buf.rename()*
Renames all references to the symbol under the cursor.
Parameters: ~
• {new_name} (string|nil) If not provided, the user will be prompted
for a new name using |vim.ui.input()|.
• {options} (table|nil) additional options
• filter (function|nil): Predicate used to filter clients.
Receives a client as argument and must return a boolean.
Clients matching the predicate are included.
• name (string|nil): Restrict clients used for rename to
ones where client.name matches this field.
signature_help() *vim.lsp.buf.signature_help()*
Displays signature information about the symbol under the cursor in a
floating window.
type_definition({options}) *vim.lsp.buf.type_definition()*
Jumps to the definition of the type of the symbol under the cursor.
Parameters: ~
• {options} (table|nil) additional options
• reuse_win: (boolean) Jump to existing window if buffer is
already open.
• on_list: (function) |lsp-on-list-handler| replacing the
default handler. Called for any non-empty result.
workspace_symbol({query}, {options}) *vim.lsp.buf.workspace_symbol()*
Lists all symbols in the current workspace in the quickfix window.
The list is filtered against {query}; if the argument is omitted from the
call, the user is prompted to enter a string on the command line. An empty
string means no filtering is done.
Parameters: ~
• {query} (string|nil) optional
• {options} (table|nil) additional options
• on_list: (function) handler for list results. See
|lsp-on-list-handler|
==============================================================================
Lua module: vim.lsp.diagnostic *lsp-diagnostic*
*vim.lsp.diagnostic.get_namespace()*
get_namespace({client_id}, {is_pull})
Get the diagnostic namespace associated with an LSP client
|vim.diagnostic| for diagnostics
Parameters: ~
• {client_id} (integer) The id of the LSP client
• {is_pull} boolean? Whether the namespace is for a pull or push
client. Defaults to push
*vim.lsp.diagnostic.on_diagnostic()*
on_diagnostic({_}, {result}, {ctx}, {config})
|lsp-handler| for the method "textDocument/diagnostic"
See |vim.diagnostic.config()| for configuration options. Handler-specific
configuration can be set using |vim.lsp.with()|: >lua
vim.lsp.handlers["textDocument/diagnostic"] = vim.lsp.with(
vim.lsp.diagnostic.on_diagnostic, {
-- Enable underline, use default values
underline = true,
-- Enable virtual text, override spacing to 4
virtual_text = {
spacing = 4,
},
-- Use a function to dynamically turn signs off
-- and on, using buffer local variables
signs = function(namespace, bufnr)
return vim.b[bufnr].show_signs == true
end,
-- Disable a feature
update_in_insert = false,
}
)
<
Parameters: ~
• {config} (table) Configuration table (see |vim.diagnostic.config()|).
*vim.lsp.diagnostic.on_publish_diagnostics()*
on_publish_diagnostics({_}, {result}, {ctx}, {config})
|lsp-handler| for the method "textDocument/publishDiagnostics"
See |vim.diagnostic.config()| for configuration options. Handler-specific
configuration can be set using |vim.lsp.with()|: >lua
vim.lsp.handlers["textDocument/publishDiagnostics"] = vim.lsp.with(
vim.lsp.diagnostic.on_publish_diagnostics, {
-- Enable underline, use default values
underline = true,
-- Enable virtual text, override spacing to 4
virtual_text = {
spacing = 4,
},
-- Use a function to dynamically turn signs off
-- and on, using buffer local variables
signs = function(namespace, bufnr)
return vim.b[bufnr].show_signs == true
end,
-- Disable a feature
update_in_insert = false,
}
)
<
Parameters: ~
• {config} (table) Configuration table (see |vim.diagnostic.config()|).
==============================================================================
Lua module: vim.lsp.codelens *lsp-codelens*
clear({client_id}, {bufnr}) *vim.lsp.codelens.clear()*
Clear the lenses
Parameters: ~
• {client_id} (integer|nil) filter by client_id. All clients if nil
• {bufnr} (integer|nil) filter by buffer. All buffers if nil
display({lenses}, {bufnr}, {client_id}) *vim.lsp.codelens.display()*
Display the lenses using virtual text
Parameters: ~
• {lenses} lsp.CodeLens[]|nil lenses to display
• {bufnr} (integer)
• {client_id} (integer)
get({bufnr}) *vim.lsp.codelens.get()*
Return all lenses for the given buffer
Parameters: ~
• {bufnr} (integer) Buffer number. 0 can be used for the current
buffer.
Return: ~
lsp.CodeLens[]
*vim.lsp.codelens.on_codelens()*
on_codelens({err}, {result}, {ctx}, {_})
|lsp-handler| for the method `textDocument/codeLens`
refresh() *vim.lsp.codelens.refresh()*
Refresh the codelens for the current buffer
It is recommended to trigger this using an autocmd or via keymap.
Example: >vim
autocmd BufEnter,CursorHold,InsertLeave <buffer> lua vim.lsp.codelens.refresh()
<
run() *vim.lsp.codelens.run()*
Run the code lens in the current line
save({lenses}, {bufnr}, {client_id}) *vim.lsp.codelens.save()*
Store lenses for a specific buffer and client
Parameters: ~
• {lenses} lsp.CodeLens[]|nil lenses to store
• {bufnr} (integer)
• {client_id} (integer)
==============================================================================
Lua module: vim.lsp.inlay_hint *lsp-inlay_hint*
enable({bufnr}, {enable}) *vim.lsp.inlay_hint.enable()*
Enable/disable/toggle inlay hints for a buffer
Note: ~
This API is pre-release (unstable).
Parameters: ~
• {bufnr} (integer|nil) Buffer handle, or 0 or nil for current
• {enable} (boolean|nil) true/nil to enable, false to disable
get({filter}) *vim.lsp.inlay_hint.get()*
Get the list of inlay hints, (optionally) restricted by buffer or range.
Example usage: >lua
local hint = vim.lsp.inlay_hint.get({ bufnr = 0 })[1] -- 0 for current buffer
local client = vim.lsp.get_client_by_id(hint.client_id)
resolved_hint = client.request_sync('inlayHint/resolve', hint.inlay_hint, 100, 0).result
vim.lsp.util.apply_text_edits(resolved_hint.textEdits, 0, client.encoding)
location = resolved_hint.label[1].location
client.request('textDocument/hover', {
textDocument = { uri = location.uri },
position = location.range.start,
})
<
Note: ~
This API is pre-release (unstable).
Parameters: ~
• {filter} vim.lsp.inlay_hint.get.filter ? Optional filters |kwargs|:
• bufnr (integer?): 0 for current buffer
• range (lsp.Range?)
Return: ~
vim.lsp.inlay_hint.get.ret [] Each list item is a table with the following fields:
• bufnr (integer)
• client_id (integer)
• inlay_hint (lsp.InlayHint)
is_enabled({bufnr}) *vim.lsp.inlay_hint.is_enabled()*
Note: ~
This API is pre-release (unstable).
Parameters: ~
• {bufnr} (integer|nil) Buffer handle, or 0 or nil for current
Return: ~
(boolean)
==============================================================================
Lua module: vim.lsp.semantic_tokens *lsp-semantic_tokens*
force_refresh({bufnr}) *vim.lsp.semantic_tokens.force_refresh()*
Force a refresh of all semantic tokens
Only has an effect if the buffer is currently active for semantic token
highlighting (|vim.lsp.semantic_tokens.start()| has been called for it)
Parameters: ~
• {bufnr} (integer|nil) filter by buffer. All buffers if nil, current
buffer if 0
*vim.lsp.semantic_tokens.get_at_pos()*
get_at_pos({bufnr}, {row}, {col})
Return the semantic token(s) at the given position. If called without
arguments, returns the token under the cursor.
Parameters: ~
• {bufnr} (integer|nil) Buffer number (0 for current buffer, default)
• {row} (integer|nil) Position row (default cursor position)
• {col} (integer|nil) Position column (default cursor position)
Return: ~
(table|nil) List of tokens at position. Each token has the following
fields:
• line (integer) line number, 0-based
• start_col (integer) start column, 0-based
• end_col (integer) end column, 0-based
• type (string) token type as string, e.g. "variable"
• modifiers (table) token modifiers as a set. E.g., { static = true,
readonly = true }
*vim.lsp.semantic_tokens.highlight_token()*
highlight_token({token}, {bufnr}, {client_id}, {hl_group}, {opts})
Highlight a semantic token.
Apply an extmark with a given highlight group for a semantic token. The
mark will be deleted by the semantic token engine when appropriate; for
example, when the LSP sends updated tokens. This function is intended for
use inside |LspTokenUpdate| callbacks.
Parameters: ~
• {token} (table) a semantic token, found as `args.data.token` in
|LspTokenUpdate|.
• {bufnr} (integer) the buffer to highlight
• {client_id} (integer) The ID of the |vim.lsp.client|
• {hl_group} (string) Highlight group name
• {opts} (table|nil) Optional parameters.
• priority: (integer|nil) Priority for the applied
extmark. Defaults to
`vim.highlight.priorities.semantic_tokens + 3`
start({bufnr}, {client_id}, {opts}) *vim.lsp.semantic_tokens.start()*
Start the semantic token highlighting engine for the given buffer with the
given client. The client must already be attached to the buffer.
NOTE: This is currently called automatically by
|vim.lsp.buf_attach_client()|. To opt-out of semantic highlighting with a
server that supports it, you can delete the semanticTokensProvider table
from the {server_capabilities} of your client in your |LspAttach| callback
or your configuration's `on_attach` callback: >lua
client.server_capabilities.semanticTokensProvider = nil
<
Parameters: ~
• {bufnr} (integer)
• {client_id} (integer)
• {opts} (nil|table) Optional keyword arguments
• debounce (integer, default: 200): Debounce token
requests to the server by the given number in
milliseconds
stop({bufnr}, {client_id}) *vim.lsp.semantic_tokens.stop()*
Stop the semantic token highlighting engine for the given buffer with the
given client.
NOTE: This is automatically called by a |LspDetach| autocmd that is set up
as part of `start()`, so you should only need this function to manually
disengage the semantic token engine without fully detaching the LSP client
from the buffer.
Parameters: ~
• {bufnr} (integer)
• {client_id} (integer)
==============================================================================
Lua module: vim.lsp.handlers *lsp-handlers*
hover({_}, {result}, {ctx}, {config}) *vim.lsp.handlers.hover()*
|lsp-handler| for the method "textDocument/hover" >lua
vim.lsp.handlers["textDocument/hover"] = vim.lsp.with(
vim.lsp.handlers.hover, {
-- Use a sharp border with `FloatBorder` highlights
border = "single",
-- add the title in hover float window
title = "hover"
}
)
<
Parameters: ~
• {config} (table) Configuration table.
• border: (default=nil)
• Add borders to the floating window
• See |vim.lsp.util.open_floating_preview()| for more
options.
*vim.lsp.handlers.signature_help()*
signature_help({_}, {result}, {ctx}, {config})
|lsp-handler| for the method "textDocument/signatureHelp".
The active parameter is highlighted with |hl-LspSignatureActiveParameter|. >lua
vim.lsp.handlers["textDocument/signatureHelp"] = vim.lsp.with(
vim.lsp.handlers.signature_help, {
-- Use a sharp border with `FloatBorder` highlights
border = "single"
}
)
<
Parameters: ~
• {result} (table) Response from the language server
• {ctx} (table) Client context
• {config} (table) Configuration table.
• border: (default=nil)
• Add borders to the floating window
• See |vim.lsp.util.open_floating_preview()| for more
options
==============================================================================
Lua module: vim.lsp.util *lsp-util*
*vim.lsp.util.apply_text_document_edit()*
apply_text_document_edit({text_document_edit}, {index}, {offset_encoding})
Applies a `TextDocumentEdit`, which is a list of changes to a single
document.
Parameters: ~
• {text_document_edit} (table) a `TextDocumentEdit` object
• {index} (integer) Optional index of the edit, if from a
list of edits (or nil, if not from a list)
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocumentEdit
*vim.lsp.util.apply_text_edits()*
apply_text_edits({text_edits}, {bufnr}, {offset_encoding})
Applies a list of text edits to a buffer.
Parameters: ~
• {text_edits} (table) list of `TextEdit` objects
• {bufnr} (integer) Buffer id
• {offset_encoding} (string) utf-8|utf-16|utf-32
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textEdit
*vim.lsp.util.apply_workspace_edit()*
apply_workspace_edit({workspace_edit}, {offset_encoding})
Applies a `WorkspaceEdit`.
Parameters: ~
• {workspace_edit} (table) `WorkspaceEdit`
• {offset_encoding} (string) utf-8|utf-16|utf-32 (required)
buf_clear_references({bufnr}) *vim.lsp.util.buf_clear_references()*
Removes document highlights from a buffer.
Parameters: ~
• {bufnr} (integer|nil) Buffer id
*vim.lsp.util.buf_highlight_references()*
buf_highlight_references({bufnr}, {references}, {offset_encoding})
Shows a list of document highlights for a certain buffer.
Parameters: ~
• {bufnr} (integer) Buffer id
• {references} (table) List of `DocumentHighlight` objects to
highlight
• {offset_encoding} (string) One of "utf-8", "utf-16", "utf-32".
See also: ~
• https://microsoft.github.io/language-server-protocol/specification/#textDocumentContentChangeEvent
*vim.lsp.util.character_offset()*
character_offset({buf}, {row}, {col}, {offset_encoding})
Returns the UTF-32 and UTF-16 offsets for a position in a certain buffer.
Parameters: ~
• {buf} (integer) buffer number (0 for current)
• {row} 0-indexed line
• {col} 0-indexed byte offset in line
• {offset_encoding} (string) utf-8|utf-16|utf-32 defaults to
`offset_encoding` of first client of `buf`
Return: ~
(integer) `offset_encoding` index of the character in line {row}
column {col} in buffer {buf}
*vim.lsp.util.convert_input_to_markdown_lines()*
convert_input_to_markdown_lines({input}, {contents})
Converts any of `MarkedString` | `MarkedString[]` | `MarkupContent` into a
list of lines containing valid markdown. Useful to populate the hover
window for `textDocument/hover`, for parsing the result of
`textDocument/signatureHelp`, and potentially others.
Note that if the input is of type `MarkupContent` and its kind is
`plaintext`, then the corresponding value is returned without further
modifications.
Parameters: ~
• {input} (`MarkedString` | `MarkedString[]` | `MarkupContent`)
• {contents} (table|nil) List of strings to extend with converted
lines. Defaults to {}.
Return: ~
string[] extended with lines of converted markdown.
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocument_hover
*vim.lsp.util.convert_signature_help_to_markdown_lines()*
convert_signature_help_to_markdown_lines({signature_help}, {ft}, {triggers})
Converts `textDocument/signatureHelp` response to markdown lines.
Parameters: ~
• {signature_help} (table) Response of `textDocument/SignatureHelp`
• {ft} (string|nil) filetype that will be use as the `lang`
for the label markdown code block
• {triggers} (table|nil) list of trigger characters from the lsp
server. used to better determine parameter offsets
Return (multiple): ~
(table|nil) table list of lines of converted markdown.
(table|nil) table of active hl
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocument_signatureHelp
get_effective_tabstop({bufnr}) *vim.lsp.util.get_effective_tabstop()*
Returns indentation size.
Parameters: ~
• {bufnr} (integer|nil) Buffer handle, defaults to current
Return: ~
(integer) indentation size
See also: ~
• 'shiftwidth'
*vim.lsp.util.jump_to_location()*
jump_to_location({location}, {offset_encoding}, {reuse_win})
Jumps to a location.
Parameters: ~
• {location} (table) (`Location`|`LocationLink`)
• {offset_encoding} (string|nil) utf-8|utf-16|utf-32
• {reuse_win} (boolean|nil) Jump to existing window if buffer is
already open.
Return: ~
(boolean) `true` if the jump succeeded
*vim.lsp.util.locations_to_items()*
locations_to_items({locations}, {offset_encoding})
Returns the items with the byte position calculated correctly and in
sorted order, for display in quickfix and location lists.
The `user_data` field of each resulting item will contain the original
`Location` or `LocationLink` it was computed from.
The result can be passed to the {list} argument of |setqflist()| or
|setloclist()|.
Parameters: ~
• {locations} (table) list of `Location`s or `LocationLink`s
• {offset_encoding} (string) offset_encoding for locations
utf-8|utf-16|utf-32 default to first client of
buffer
Return: ~
(table) list of items
lookup_section({settings}, {section}) *vim.lsp.util.lookup_section()*
Helper function to return nested values in language server settings
Parameters: ~
• {settings} (table) language server settings
• {section} string indicating the field of the settings table
Return: ~
table|string The value of settings accessed via section
*vim.lsp.util.make_floating_popup_options()*
make_floating_popup_options({width}, {height}, {opts})
Creates a table with sensible default options for a floating window. The
table can be passed to |nvim_open_win()|.
Parameters: ~
• {width} (integer) window width (in character cells)
• {height} (integer) window height (in character cells)
• {opts} (table) optional
• offset_x (integer) offset to add to `col`
• offset_y (integer) offset to add to `row`
• border (string or table) override `border`
• focusable (string or table) override `focusable`
• zindex (string or table) override `zindex`, defaults to 50
• relative ("mouse"|"cursor") defaults to "cursor"
• anchor_bias ("auto"|"above"|"below") defaults to "auto"
• "auto": place window based on which side of the cursor
has more lines
• "above": place the window above the cursor unless there
are not enough lines to display the full window height.
• "below": place the window below the cursor unless there
are not enough lines to display the full window height.
Return: ~
(table) Options
*vim.lsp.util.make_formatting_params()*
make_formatting_params({options})
Creates a `DocumentFormattingParams` object for the current buffer and
cursor position.
Parameters: ~
• {options} (table|nil) with valid `FormattingOptions` entries
Return: ~
`DocumentFormattingParams` object
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocument_formatting
*vim.lsp.util.make_given_range_params()*
make_given_range_params({start_pos}, {end_pos}, {bufnr}, {offset_encoding})
Using the given range in the current buffer, creates an object that is
similar to |vim.lsp.util.make_range_params()|.
Parameters: ~
• {start_pos} integer[]|nil {row,col} mark-indexed position.
Defaults to the start of the last visual selection.
• {end_pos} integer[]|nil {row,col} mark-indexed position.
Defaults to the end of the last visual selection.
• {bufnr} (integer|nil) buffer handle or 0 for current,
defaults to current
• {offset_encoding} "utf-8"|"utf-16"|"utf-32"|nil defaults to
`offset_encoding` of first client of `bufnr`
Return: ~
(table) { textDocument = { uri = `current_file_uri` }, range = { start
= `start_position`, end = `end_position` } }
*vim.lsp.util.make_position_params()*
make_position_params({window}, {offset_encoding})
Creates a `TextDocumentPositionParams` object for the current buffer and
cursor position.
Parameters: ~
• {window} (integer|nil) window handle or 0 for current,
defaults to current
• {offset_encoding} (string|nil) utf-8|utf-16|utf-32|nil defaults to
`offset_encoding` of first client of buffer of
`window`
Return: ~
(table) `TextDocumentPositionParams` object
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocumentPositionParams
*vim.lsp.util.make_range_params()*
make_range_params({window}, {offset_encoding})
Using the current position in the current buffer, creates an object that
can be used as a building block for several LSP requests, such as
`textDocument/codeAction`, `textDocument/colorPresentation`,
`textDocument/rangeFormatting`.
Parameters: ~
• {window} (integer|nil) window handle or 0 for current,
defaults to current
• {offset_encoding} "utf-8"|"utf-16"|"utf-32"|nil defaults to
`offset_encoding` of first client of buffer of
`window`
Return: ~
(table) { textDocument = { uri = `current_file_uri` }, range = { start
= `current_position`, end = `current_position` } }
*vim.lsp.util.make_text_document_params()*
make_text_document_params({bufnr})
Creates a `TextDocumentIdentifier` object for the current buffer.
Parameters: ~
• {bufnr} (integer|nil) Buffer handle, defaults to current
Return: ~
(table) `TextDocumentIdentifier`
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#textDocumentIdentifier
*vim.lsp.util.make_workspace_params()*
make_workspace_params({added}, {removed})
Create the workspace params
Parameters: ~
• {added} (table)
• {removed} (table)
*vim.lsp.util.open_floating_preview()*
open_floating_preview({contents}, {syntax}, {opts})
Shows contents in a floating window.
Parameters: ~
• {contents} (table) of lines to show in window
• {syntax} (string) of syntax to set for opened buffer
• {opts} (table) with optional fields (additional keys are filtered
with |vim.lsp.util.make_floating_popup_options()| before
they are passed on to |nvim_open_win()|)
• height: (integer) height of floating window
• width: (integer) width of floating window
• wrap: (boolean, default true) wrap long lines
• wrap_at: (integer) character to wrap at for computing
height when wrap is enabled
• max_width: (integer) maximal width of floating window
• max_height: (integer) maximal height of floating window
• focus_id: (string) if a popup with this id is opened,
then focus it
• close_events: (table) list of events that closes the
floating window
• focusable: (boolean, default true) Make float focusable
• focus: (boolean, default true) If `true`, and if
{focusable} is also `true`, focus an existing floating
window with the same {focus_id}
Return (multiple): ~
(integer) bufnr of newly created float window
(integer) winid of newly created float window preview window
preview_location({location}, {opts}) *vim.lsp.util.preview_location()*
Previews a location in a floating window
behavior depends on type of location:
• for Location, range is shown (e.g., function definition)
• for LocationLink, targetRange is shown (e.g., body of function
definition)
Parameters: ~
• {location} (table) a single `Location` or `LocationLink`
Return (multiple): ~
(integer|nil) buffer id of float window
(integer|nil) window id of float window
rename({old_fname}, {new_fname}, {opts}) *vim.lsp.util.rename()*
Rename old_fname to new_fname
Parameters: ~
• {opts} (table)
*vim.lsp.util.show_document()*
show_document({location}, {offset_encoding}, {opts})
Shows document and optionally jumps to the location.
Parameters: ~
• {location} (table) (`Location`|`LocationLink`)
• {offset_encoding} (string|nil) utf-8|utf-16|utf-32
• {opts} (table|nil) options
• reuse_win (boolean) Jump to existing window if
buffer is already open.
• focus (boolean) Whether to focus/jump to location
if possible. Defaults to true.
Return: ~
(boolean) `true` if succeeded
*vim.lsp.util.stylize_markdown()*
stylize_markdown({bufnr}, {contents}, {opts})
Converts markdown into syntax highlighted regions by stripping the code
blocks and converting them into highlighted code. This will by default
insert a blank line separator after those code block regions to improve
readability.
This method configures the given buffer and returns the lines to set.
If you want to open a popup with fancy markdown, use
`open_floating_preview` instead
Parameters: ~
• {contents} (table) of lines to show in window
• {opts} (table) with optional fields
• height of floating window
• width of floating window
• wrap_at character to wrap at for computing height
• max_width maximal width of floating window
• max_height maximal height of floating window
• separator insert separator after code block
Return: ~
(table) stripped content
symbols_to_items({symbols}, {bufnr}) *vim.lsp.util.symbols_to_items()*
Converts symbols to quickfix list items.
Parameters: ~
• {symbols} (table) DocumentSymbol[] or SymbolInformation[]
==============================================================================
Lua module: vim.lsp.log *lsp-log*
get_filename() *vim.lsp.log.get_filename()*
Returns the log filename.
Return: ~
(string) log filename
get_level() *vim.lsp.log.get_level()*
Gets the current log level.
Return: ~
(integer) current log level
set_format_func({handle}) *vim.lsp.log.set_format_func()*
Sets formatting function used to format logs
Parameters: ~
• {handle} (function) function to apply to logging arguments, pass
vim.inspect for multi-line formatting
set_level({level}) *vim.lsp.log.set_level()*
Sets the current log level.
Parameters: ~
• {level} (string|integer) One of `vim.lsp.log.levels`
should_log({level}) *vim.lsp.log.should_log()*
Checks whether the level is sufficient for logging.
Parameters: ~
• {level} (integer) log level
Return: ~
(bool) true if would log, false if not
==============================================================================
Lua module: vim.lsp.rpc *lsp-rpc*
connect({host}, {port}) *vim.lsp.rpc.connect()*
Create a LSP RPC client factory that connects via TCP to the given host
and port
Parameters: ~
• {host} (string)
• {port} (integer)
Return: ~
(function)
format_rpc_error({err}) *vim.lsp.rpc.format_rpc_error()*
Constructs an error message from an LSP error object.
Parameters: ~
• {err} (table) The error object
Return: ~
(string) The formatted error message
notify({method}, {params}) *vim.lsp.rpc.notify()*
Sends a notification to the LSP server.
Parameters: ~
• {method} (string) The invoked LSP method
• {params} (table|nil) Parameters for the invoked LSP method
Return: ~
(boolean) `true` if notification could be sent, `false` if not
*vim.lsp.rpc.request()*
request({method}, {params}, {callback}, {notify_reply_callback})
Sends a request to the LSP server and runs {callback} upon response.
Parameters: ~
• {method} (string) The invoked LSP method
• {params} (table|nil) Parameters for the invoked LSP
method
• {callback} fun(err: lsp.ResponseError | nil, result:
any) Callback to invoke
• {notify_reply_callback} (function|nil) Callback to invoke as soon as
a request is no longer pending
Return: ~
(boolean) success, integer|nil request_id true, message_id if request
could be sent, `false` if not
*vim.lsp.rpc.rpc_response_error()*
rpc_response_error({code}, {message}, {data})
Creates an RPC response object/table.
Parameters: ~
• {code} (integer) RPC error code defined in
`vim.lsp.protocol.ErrorCodes`
• {message} (string|nil) arbitrary message to send to server
• {data} any|nil arbitrary data to send to server
*vim.lsp.rpc.start()*
start({cmd}, {cmd_args}, {dispatchers}, {extra_spawn_params})
Starts an LSP server process and create an LSP RPC client object to
interact with it. Communication with the spawned process happens via
stdio. For communication via TCP, spawn a process manually and use
|vim.lsp.rpc.connect()|
Parameters: ~
• {cmd} (string) Command to start the LSP server.
• {cmd_args} (table) List of additional string arguments to
pass to {cmd}.
• {dispatchers} (table|nil) Dispatchers for LSP message types.
Valid dispatcher names are:
• `"notification"`
• `"server_request"`
• `"on_error"`
• `"on_exit"`
• {extra_spawn_params} (table|nil) Additional context for the LSP
server process. May contain:
• {cwd} (string) Working directory for the LSP
server process
• {env} (table) Additional environment variables
for LSP server process
Return: ~
(table|nil) Client RPC object, with these methods:
• `notify()` |vim.lsp.rpc.notify()|
• `request()` |vim.lsp.rpc.request()|
• `is_closing()` returns a boolean indicating if the RPC is closing.
• `terminate()` terminates the RPC client.
==============================================================================
Lua module: vim.lsp.protocol *lsp-protocol*
*vim.lsp.protocol.make_client_capabilities()*
make_client_capabilities()
Gets a new ClientCapabilities object describing the LSP client
capabilities.
Return: ~
lsp.ClientCapabilities
Methods *vim.lsp.protocol.Methods*
LSP method names.
See also: ~
• https://microsoft.github.io/language-server-protocol/specifications/specification-current/#metaModel
*vim.lsp.protocol.resolve_capabilities()*
resolve_capabilities({server_capabilities})
Creates a normalized object describing LSP server capabilities.
Parameters: ~
• {server_capabilities} (table) Table of capabilities supported by the
server
Return: ~
(table|nil) Normalized table of capabilities
vim:tw=78:ts=8:sw=4:sts=4:et:ft=help:norl:
Reference in New Issue View Git Blame Copy Permalink