neovim/test/functional/ex_cmds/swapfile_preserve_recover_spec.lua

local Screen = require('test.functional.ui.screen')
local t = require('test.functional.testutil')()
local uv = vim.uv
local eq, eval, expect, exec = t.eq, t.eval, t.expect, t.exec
local assert_alive = t.assert_alive
local clear = t.clear
local command = t.command
local feed = t.feed
local fn = t.fn
local nvim_prog = t.nvim_prog
local ok = t.ok
local rmdir = t.rmdir
local new_argv = t.new_argv
local new_pipename = t.new_pipename
local pesc = vim.pesc
local os_kill = t.os_kill
local set_session = t.set_session
local spawn = t.spawn
local async_meths = t.async_meths
local expect_msg_seq = t.expect_msg_seq
local pcall_err = t.pcall_err
local mkdir = t.mkdir
local poke_eventloop = t.poke_eventloop
local api = t.api
local retry = t.retry
local write_file = t.write_file

describe(':recover', function()
  before_each(clear)

  it('fails if given a non-existent swapfile', function()
    local swapname = 'bogus_swapfile'
    local swapname2 = 'bogus_swapfile.swp'
    eq(
      'Vim(recover):E305: No swap file found for ' .. swapname,
      pcall_err(command, 'recover ' .. swapname)
    ) -- Should not segfault. #2117
    -- Also check filename ending with ".swp". #9504
    eq('Vim(recover):E306: Cannot open ' .. swapname2, pcall_err(command, 'recover ' .. swapname2)) -- Should not segfault. #2117
    assert_alive()
  end)
end)

describe("preserve and (R)ecover with custom 'directory'", function()
  local swapdir = uv.cwd() .. '/Xtest_recover_dir'
  local testfile = 'Xtest_recover_file1'
  -- Put swapdir at the start of the 'directory' list. #1836
  -- Note: `set swapfile` *must* go after `set directory`: otherwise it may
  -- attempt to create a swapfile in different directory.
  local init = [[
    set directory^=]] .. swapdir:gsub([[\]], [[\\]]) .. [[//
    set swapfile fileformat=unix undolevels=-1
  ]]

  local nvim0
  before_each(function()
    nvim0 = spawn(new_argv())
    set_session(nvim0)
    rmdir(swapdir)
    mkdir(swapdir)
  end)
  after_each(function()
    command('%bwipeout!')
    rmdir(swapdir)
  end)

  local function setup_swapname()
    exec(init)
    command('edit! ' .. testfile)
    feed('isometext<esc>')
    exec('redir => g:swapname | silent swapname | redir END')
    return eval('g:swapname')
  end

  local function test_recover(swappath1)
    -- Start another Nvim instance.
    local nvim2 = spawn({ nvim_prog, '-u', 'NONE', '-i', 'NONE', '--embed' }, true)
    set_session(nvim2)

    exec(init)

    -- Use the "SwapExists" event to choose the (R)ecover choice at the dialog.
    command('autocmd SwapExists * let v:swapchoice = "r"')
    command('silent edit! ' .. testfile)
    exec('redir => g:swapname | silent swapname | redir END')

    local swappath2 = eval('g:swapname')

    expect('sometext')
    -- swapfile from session 1 should end in .swp
    eq(testfile .. '.swp', string.match(swappath1, '[^%%]+$'))
    -- swapfile from session 2 should end in .swo
    eq(testfile .. '.swo', string.match(swappath2, '[^%%]+$'))
    -- Verify that :swapname was not truncated (:help 'shortmess').
    ok(nil == string.find(swappath1, '%.%.%.'))
    ok(nil == string.find(swappath2, '%.%.%.'))
  end

  it('with :preserve and SIGKILL', function()
    local swappath1 = setup_swapname()
    command('preserve')
    os_kill(eval('getpid()'))
    test_recover(swappath1)
  end)

  it('closing stdio channel without :preserve #22096', function()
    local swappath1 = setup_swapname()
    nvim0:close()
    test_recover(swappath1)
  end)

  it('killing TUI process without :preserve #22096', function()
    t.skip(t.is_os('win'))
    local screen0 = Screen.new()
    screen0:attach()
    local child_server = new_pipename()
    fn.termopen({ nvim_prog, '-u', 'NONE', '-i', 'NONE', '--listen', child_server }, {
      env = { VIMRUNTIME = os.getenv('VIMRUNTIME') },
    })
    screen0:expect({ any = pesc('[No Name]') }) -- Wait for the child process to start.
    local child_session = t.connect(child_server)
    set_session(child_session)
    local swappath1 = setup_swapname()
    set_session(nvim0)
    command('call chanclose(&channel)') -- Kill the child process.
    screen0:expect({ any = pesc('[Process exited 1]') }) -- Wait for the child process to stop.
    test_recover(swappath1)
  end)
end)

describe('swapfile detection', function()
  local swapdir = uv.cwd() .. '/Xtest_swapdialog_dir'
  local nvim0
  -- Put swapdir at the start of the 'directory' list. #1836
  -- Note: `set swapfile` *must* go after `set directory`: otherwise it may
  -- attempt to create a swapfile in different directory.
  local init = [[
    set directory^=]] .. swapdir:gsub([[\]], [[\\]]) .. [[//
    set swapfile fileformat=unix nomodified undolevels=-1 nohidden
  ]]
  before_each(function()
    nvim0 = spawn(new_argv())
    set_session(nvim0)
    rmdir(swapdir)
    mkdir(swapdir)
  end)
  after_each(function()
    set_session(nvim0)
    command('%bwipeout!')
    rmdir(swapdir)
  end)

  it('always show swapfile dialog #8840 #9027', function()
    local testfile = 'Xtest_swapdialog_file1'

    local expected_no_dialog = '^' .. (' '):rep(256) .. '|\n'
    for _ = 1, 37 do
      expected_no_dialog = expected_no_dialog .. '~' .. (' '):rep(255) .. '|\n'
    end
    expected_no_dialog = expected_no_dialog .. testfile .. (' '):rep(216) .. '0,0-1          All|\n'
    expected_no_dialog = expected_no_dialog .. (' '):rep(256) .. '|\n'

    exec(init)
    command('edit! ' .. testfile)
    feed('isometext<esc>')
    command('preserve')

    -- Start another Nvim instance.
    local nvim2 = spawn({ nvim_prog, '-u', 'NONE', '-i', 'NONE', '--embed' }, true, nil, true)
    set_session(nvim2)
    local screen2 = Screen.new(256, 40)
    screen2:attach()
    screen2._default_attr_ids = nil
    exec(init)
    command('autocmd! nvim_swapfile') -- Delete the default handler (which skips the dialog).

    -- With shortmess+=F
    command('set shortmess+=F')
    feed(':edit ' .. testfile .. '<CR>')
    screen2:expect {
      any = [[E325: ATTENTION.*]]
        .. '\n'
        .. [[Found a swap file by the name ".*]]
        .. [[Xtest_swapdialog_dir[/\].*]]
        .. testfile
        .. [[%.swp"]],
    }
    feed('e') -- Chose "Edit" at the swap dialog.
    screen2:expect(expected_no_dialog)

    -- With :silent and shortmess+=F
    feed(':silent edit %<CR>')
    screen2:expect {
      any = [[Found a swap file by the name ".*]]
        .. [[Xtest_swapdialog_dir[/\].*]]
        .. testfile
        .. [[%.swp"]],
    }
    feed('e') -- Chose "Edit" at the swap dialog.
    screen2:expect(expected_no_dialog)

    -- With :silent! and shortmess+=F
    feed(':silent! edit %<CR>')
    screen2:expect {
      any = [[Found a swap file by the name ".*]]
        .. [[Xtest_swapdialog_dir[/\].*]]
        .. testfile
        .. [[%.swp"]],
    }
    feed('e') -- Chose "Edit" at the swap dialog.
    screen2:expect(expected_no_dialog)

    -- With API (via eval/Vimscript) call and shortmess+=F
    feed(':call nvim_command("edit %")<CR>')
    screen2:expect {
      any = [[Found a swap file by the name ".*]]
        .. [[Xtest_swapdialog_dir[/\].*]]
        .. testfile
        .. [[%.swp"]],
    }
    feed('e') -- Chose "Edit" at the swap dialog.
    feed('<c-c>')
    screen2:expect(expected_no_dialog)

    -- With API call and shortmess+=F
    async_meths.nvim_command('edit %')
    screen2:expect {
      any = [[Found a swap file by the name ".*]]
        .. [[Xtest_swapdialog_dir[/\].*]]
        .. testfile
        .. [[%.swp"]],
    }
    feed('e') -- Chose "Edit" at the swap dialog.
    expect_msg_seq({
      ignore = { 'redraw' },
      seqs = {
        { { 'notification', 'nvim_error_event', { 0, 'Vim(edit):E325: ATTENTION' } } },
      },
    })
    feed('<cr>')

    nvim2:close()
  end)

  it('default SwapExists handler selects "(E)dit" and skips prompt', function()
    exec(init)
    command('edit Xfile1')
    command("put ='some text...'")
    command('preserve') -- Make sure the swap file exists.
    local nvimpid = fn.getpid()

    local nvim1 = spawn(new_argv(), true, nil, true)
    set_session(nvim1)
    local screen = Screen.new(75, 18)
    screen:attach()
    exec(init)
    feed(':edit Xfile1\n')

    screen:expect({ any = ('W325: Ignoring swapfile from Nvim process %d'):format(nvimpid) })
    nvim1:close()
  end)

  -- oldtest: Test_swap_prompt_splitwin()
  it('selecting "q" in the attention prompt', function()
    exec(init)
    command('edit Xfile1')
    command('preserve') -- Make sure the swap file exists.

    local screen = Screen.new(75, 18)
    screen:set_default_attr_ids({
      [0] = { bold = true, foreground = Screen.colors.Blue }, -- NonText
      [1] = { bold = true, foreground = Screen.colors.SeaGreen }, -- MoreMsg
    })

    local nvim1 = spawn(new_argv(), true, nil, true)
    set_session(nvim1)
    screen:attach()
    exec(init)
    command('autocmd! nvim_swapfile') -- Delete the default handler (which skips the dialog).
    feed(':split Xfile1\n')
    -- The default SwapExists handler does _not_ skip this prompt.
    screen:expect({
      any = pesc('{1:[O]pen Read-Only, (E)dit anyway, (R)ecover, (Q)uit, (A)bort: }^'),
    })
    feed('q')
    feed(':<CR>')
    screen:expect([[
      ^                                                                           |
      {0:~                                                                          }|*16
      :                                                                          |
    ]])
    nvim1:close()

    local nvim2 = spawn(new_argv(), true, nil, true)
    set_session(nvim2)
    screen:attach()
    exec(init)
    command('autocmd! nvim_swapfile') -- Delete the default handler (which skips the dialog).
    command('set more')
    command('au bufadd * let foo_w = wincol()')
    feed(':e Xfile1<CR>')
    screen:expect({ any = pesc('{1:-- More --}^') })
    feed('<Space>')
    screen:expect({
      any = pesc('{1:[O]pen Read-Only, (E)dit anyway, (R)ecover, (Q)uit, (A)bort: }^'),
    })
    feed('q')
    command([[echo 'hello']])
    screen:expect([[
      ^                                                                           |
      {0:~                                                                          }|*16
      hello                                                                      |
    ]])
    nvim2:close()
  end)

  --- @param swapexists boolean Enable the default SwapExists handler.
  --- @param on_swapfile_running fun(screen: any) Called after swapfile ("STILL RUNNING") prompt.
  local function test_swapfile_after_reboot(swapexists, on_swapfile_running)
    local screen = Screen.new(75, 30)
    screen:set_default_attr_ids({
      [0] = { bold = true, foreground = Screen.colors.Blue }, -- NonText
      [1] = { bold = true, foreground = Screen.colors.SeaGreen }, -- MoreMsg
      [2] = { background = Screen.colors.Red, foreground = Screen.colors.White }, -- ErrorMsg
    })
    screen:attach()

    exec(init)
    if not swapexists then
      command('autocmd! nvim_swapfile') -- Delete the default handler (which skips the dialog).
    end
    command('set nohidden')

    exec([=[
      " Make a copy of the current swap file to "Xswap".
      " Return the name of the swap file.
      func CopySwapfile()
        preserve
        " get the name of the swap file
        let swname = split(execute("swapname"))[0]
        let swname = substitute(swname, '[[:blank:][:cntrl:]]*\(.\{-}\)[[:blank:][:cntrl:]]*$', '\1', '')
        " make a copy of the swap file in Xswap
        set binary
        exe 'sp ' . fnameescape(swname)
        w! Xswap
        set nobinary
        return swname
      endfunc
    ]=])

    -- Edit a file and grab its swapfile.
    exec([[
      edit Xswaptest
      call setline(1, ['a', 'b', 'c'])
    ]])
    local swname = fn.CopySwapfile()

    -- Forget we edited this file
    exec([[
      new
      only!
      bwipe! Xswaptest
    ]])

    os.rename('Xswap', swname)

    feed(':edit Xswaptest<CR>')
    on_swapfile_running(screen)

    feed('e')

    -- Forget we edited this file
    exec([[
      new
      only!
      bwipe! Xswaptest
    ]])

    -- pretend that the swapfile was created before boot
    local atime = os.time() - uv.uptime() - 10
    uv.fs_utime(swname, atime, atime)

    feed(':edit Xswaptest<CR>')
    screen:expect({
      any = table.concat({
        pesc('{2:E325: ATTENTION}'),
        pesc('{1:[O]pen Read-Only, (E)dit anyway, (R)ecover, (D)elete it, (Q)uit, (A)bort: }^'),
      }, '.*'),
    })

    feed('e')
  end

  -- oldtest: Test_nocatch_process_still_running()
  it('swapfile created before boot vim-patch:8.2.2586', function()
    test_swapfile_after_reboot(false, function(screen)
      screen:expect({
        any = table.concat({
          pesc('{2:E325: ATTENTION}'),
          'file name: .*Xswaptest',
          'process ID: %d* %(STILL RUNNING%)',
          pesc('{1:[O]pen Read-Only, (E)dit anyway, (R)ecover, (Q)uit, (A)bort: }^'),
        }, '.*'),
      })
    end)
  end)

  it('swapfile created before boot + default SwapExists handler', function()
    test_swapfile_after_reboot(true, function(screen)
      screen:expect({ any = 'W325: Ignoring swapfile from Nvim process' })
    end)
  end)
end)

describe('quitting swapfile dialog on startup stops TUI properly', function()
  local swapdir = uv.cwd() .. '/Xtest_swapquit_dir'
  local testfile = 'Xtest_swapquit_file1'
  local otherfile = 'Xtest_swapquit_file2'
  -- Put swapdir at the start of the 'directory' list. #1836
  -- Note: `set swapfile` *must* go after `set directory`: otherwise it may
  -- attempt to create a swapfile in different directory.
  local init_dir = [[set directory^=]] .. swapdir:gsub([[\]], [[\\]]) .. [[//]]
  local init_set = [[set swapfile fileformat=unix nomodified undolevels=-1 nohidden]]

  before_each(function()
    clear({ args = { '--cmd', init_dir, '--cmd', init_set } })
    rmdir(swapdir)
    mkdir(swapdir)
    write_file(
      testfile,
      [[
      first
      second
      third

    ]]
    )
    command('edit! ' .. testfile)
    feed('Gisometext<esc>')
    poke_eventloop()
    clear() -- Leaves a swap file behind
    api.nvim_ui_attach(80, 30, {})
  end)
  after_each(function()
    rmdir(swapdir)
    os.remove(testfile)
    os.remove(otherfile)
  end)

  it('(Q)uit at first file argument', function()
    local chan = fn.termopen(
      { nvim_prog, '-u', 'NONE', '-i', 'NONE', '--cmd', init_dir, '--cmd', init_set, testfile },
      {
        env = { VIMRUNTIME = os.getenv('VIMRUNTIME') },
      }
    )
    retry(nil, nil, function()
      eq(
        '[O]pen Read-Only, (E)dit anyway, (R)ecover, (D)elete it, (Q)uit, (A)bort:',
        eval("getline('$')->trim(' ', 2)")
      )
    end)
    api.nvim_chan_send(chan, 'q')
    retry(nil, nil, function()
      eq(
        { '', '[Process exited 1]', '' },
        eval("[1, 2, '$']->map({_, lnum -> getline(lnum)->trim(' ', 2)})")
      )
    end)
  end)

  it('(A)bort at second file argument with -p', function()
    local chan = fn.termopen({
      nvim_prog,
      '-u',
      'NONE',
      '-i',
      'NONE',
      '--cmd',
      init_dir,
      '--cmd',
      init_set,
      '-p',
      otherfile,
      testfile,
    }, {
      env = { VIMRUNTIME = os.getenv('VIMRUNTIME') },
    })
    retry(nil, nil, function()
      eq(
        '[O]pen Read-Only, (E)dit anyway, (R)ecover, (D)elete it, (Q)uit, (A)bort:',
        eval("getline('$')->trim(' ', 2)")
      )
    end)
    api.nvim_chan_send(chan, 'a')
    retry(nil, nil, function()
      eq(
        { '', '[Process exited 1]', '' },
        eval("[1, 2, '$']->map({_, lnum -> getline(lnum)->trim(' ', 2)})")
      )
    end)
  end)

  it('(Q)uit at file opened by -t', function()
    write_file(
      otherfile,
      ([[
      !_TAG_FILE_ENCODING	utf-8	//
      first	%s	/^  \zsfirst$/
      second	%s	/^  \zssecond$/
      third	%s	/^  \zsthird$/]]):format(testfile, testfile, testfile)
    )
    local chan = fn.termopen({
      nvim_prog,
      '-u',
      'NONE',
      '-i',
      'NONE',
      '--cmd',
      init_dir,
      '--cmd',
      init_set,
      '--cmd',
      'set tags=' .. otherfile,
      '-tsecond',
    }, {
      env = { VIMRUNTIME = os.getenv('VIMRUNTIME') },
    })
    retry(nil, nil, function()
      eq(
        '[O]pen Read-Only, (E)dit anyway, (R)ecover, (D)elete it, (Q)uit, (A)bort:',
        eval("getline('$')->trim(' ', 2)")
      )
    end)
    api.nvim_chan_send(chan, 'q')
    retry(nil, nil, function()
      eq('Press ENTER or type command to continue', eval("getline('$')->trim(' ', 2)"))
    end)
    api.nvim_chan_send(chan, '\r')
    retry(nil, nil, function()
      eq(
        { '', '[Process exited 1]', '' },
        eval("[1, 2, '$']->map({_, lnum -> getline(lnum)->trim(' ', 2)})")
      )
    end)
  end)
end)