--- @meta _ -- THIS FILE IS GENERATED -- DO NOT EDIT error('Cannot require a meta file') ---@class vim.bo ---@field [integer] vim.bo vim.bo = vim.bo ---@class vim.wo ---@field [integer] vim.wo vim.wo = vim.wo --- Allow CTRL-_ in Insert mode. This is default off, to avoid that users --- that accidentally type CTRL-_ instead of SHIFT-_ get into reverse --- Insert mode, and don't know how to get out. See 'revins'. --- --- @type boolean vim.o.allowrevins = false vim.o.ari = vim.o.allowrevins vim.go.allowrevins = vim.o.allowrevins vim.go.ari = vim.go.allowrevins --- Tells Vim what to do with characters with East Asian Width Class --- Ambiguous (such as Euro, Registered Sign, Copyright Sign, Greek --- letters, Cyrillic letters). --- --- There are currently two possible values: --- "single": Use the same width as characters in US-ASCII. This is --- expected by most users. --- "double": Use twice the width of ASCII characters. --- *E834* *E835* --- The value "double" cannot be used if 'listchars' or 'fillchars' --- contains a character that would be double width. These errors may --- also be given when calling setcellwidths(). --- --- The values are overruled for characters specified with --- `setcellwidths()`. --- --- There are a number of CJK fonts for which the width of glyphs for --- those characters are solely based on how many octets they take in --- legacy/traditional CJK encodings. In those encodings, Euro, --- Registered sign, Greek/Cyrillic letters are represented by two octets, --- therefore those fonts have "wide" glyphs for them. This is also --- true of some line drawing characters used to make tables in text --- file. Therefore, when a CJK font is used for GUI Vim or --- Vim is running inside a terminal (emulators) that uses a CJK font --- (or Vim is run inside an xterm invoked with "-cjkwidth" option.), --- this option should be set to "double" to match the width perceived --- by Vim with the width of glyphs in the font. Perhaps it also has --- to be set to "double" under CJK MS-Windows when the system locale is --- set to one of CJK locales. See Unicode Standard Annex #11 --- (https://www.unicode.org/reports/tr11). --- --- @type string vim.o.ambiwidth = "single" vim.o.ambw = vim.o.ambiwidth vim.go.ambiwidth = vim.o.ambiwidth vim.go.ambw = vim.go.ambiwidth --- This option can be set to start editing Arabic text. --- Setting this option will: --- - Set the 'rightleft' option, unless 'termbidi' is set. --- - Set the 'arabicshape' option, unless 'termbidi' is set. --- - Set the 'keymap' option to "arabic"; in Insert mode CTRL-^ toggles --- between typing English and Arabic key mapping. --- - Set the 'delcombine' option --- --- Resetting this option will: --- - Reset the 'rightleft' option. --- - Disable the use of 'keymap' (without changing its value). --- Note that 'arabicshape' and 'delcombine' are not reset (it is a global --- option). --- Also see `arabic.txt`. --- --- @type boolean vim.o.arabic = false vim.o.arab = vim.o.arabic vim.wo.arabic = vim.o.arabic vim.wo.arab = vim.wo.arabic --- When on and 'termbidi' is off, the required visual character --- corrections that need to take place for displaying the Arabic language --- take effect. Shaping, in essence, gets enabled; the term is a broad --- one which encompasses: --- a) the changing/morphing of characters based on their location --- within a word (initial, medial, final and stand-alone). --- b) the enabling of the ability to compose characters --- c) the enabling of the required combining of some characters --- When disabled the display shows each character's true stand-alone --- form. --- Arabic is a complex language which requires other settings, for --- further details see `arabic.txt`. --- --- @type boolean vim.o.arabicshape = true vim.o.arshape = vim.o.arabicshape vim.go.arabicshape = vim.o.arabicshape vim.go.arshape = vim.go.arabicshape --- When on, Vim will change the current working directory whenever you --- open a file, switch buffers, delete a buffer or open/close a window. --- It will change to the directory containing the file which was opened --- or selected. When a buffer has no name it also has no directory, thus --- the current directory won't change when navigating to it. --- Note: When this option is on some plugins may not work. --- --- @type boolean vim.o.autochdir = false vim.o.acd = vim.o.autochdir vim.go.autochdir = vim.o.autochdir vim.go.acd = vim.go.autochdir --- Copy indent from current line when starting a new line (typing --- in Insert mode or when using the "o" or "O" command). If you do not --- type anything on the new line except or CTRL-D and then type --- , CTRL-O or , the indent is deleted again. Moving the cursor --- to another line has the same effect, unless the 'I' flag is included --- in 'cpoptions'. --- When autoindent is on, formatting (with the "gq" command or when you --- reach 'textwidth' in Insert mode) uses the indentation of the first --- line. --- When 'smartindent' or 'cindent' is on the indent is changed in --- a different way. --- --- @type boolean vim.o.autoindent = true vim.o.ai = vim.o.autoindent vim.bo.autoindent = vim.o.autoindent vim.bo.ai = vim.bo.autoindent --- When a file has been detected to have been changed outside of Vim and --- it has not been changed inside of Vim, automatically read it again. --- When the file has been deleted this is not done, so you have the text --- from before it was deleted. When it appears again then it is read. --- `timestamp` --- If this option has a local value, use this command to switch back to --- using the global value: --- --- ```vim --- set autoread< --- ``` --- --- --- @type boolean vim.o.autoread = true vim.o.ar = vim.o.autoread vim.bo.autoread = vim.o.autoread vim.bo.ar = vim.bo.autoread vim.go.autoread = vim.o.autoread vim.go.ar = vim.go.autoread --- Write the contents of the file, if it has been modified, on each --- `:next`, `:rewind`, `:last`, `:first`, `:previous`, `:stop`, --- `:suspend`, `:tag`, `:!`, `:make`, CTRL-] and CTRL-^ command; and when --- a `:buffer`, CTRL-O, CTRL-I, '{A-Z0-9}, or `{A-Z0-9} command takes one --- to another file. --- A buffer is not written if it becomes hidden, e.g. when 'bufhidden' is --- set to "hide" and `:next` is used. --- Note that for some commands the 'autowrite' option is not used, see --- 'autowriteall' for that. --- Some buffers will not be written, specifically when 'buftype' is --- "nowrite", "nofile", "terminal" or "prompt". --- USE WITH CARE: If you make temporary changes to a buffer that you --- don't want to be saved this option may cause it to be saved anyway. --- Renaming the buffer with ":file {name}" may help avoid this. --- --- @type boolean vim.o.autowrite = false vim.o.aw = vim.o.autowrite vim.go.autowrite = vim.o.autowrite vim.go.aw = vim.go.autowrite --- Like 'autowrite', but also used for commands ":edit", ":enew", ":quit", --- ":qall", ":exit", ":xit", ":recover" and closing the Vim window. --- Setting this option also implies that Vim behaves like 'autowrite' has --- been set. --- --- @type boolean vim.o.autowriteall = false vim.o.awa = vim.o.autowriteall vim.go.autowriteall = vim.o.autowriteall vim.go.awa = vim.go.autowriteall --- When set to "dark" or "light", adjusts the default color groups for --- that background type. The `TUI` or other UI sets this on startup --- (triggering `OptionSet`) if it can detect the background color. --- --- This option does NOT change the background color, it tells Nvim what --- the "inherited" (terminal/GUI) background looks like. --- See `:hi-normal` if you want to set the background color explicitly. --- *g:colors_name* --- When a color scheme is loaded (the "g:colors_name" variable is set) --- changing 'background' will cause the color scheme to be reloaded. If --- the color scheme adjusts to the value of 'background' this will work. --- However, if the color scheme sets 'background' itself the effect may --- be undone. First delete the "g:colors_name" variable when needed. --- --- Normally this option would be set in the vimrc file. Possibly --- depending on the terminal name. Example: --- --- ```vim --- if $TERM ==# "xterm" --- set background=dark --- endif --- ``` --- When this option is changed, the default settings for the highlight groups --- will change. To use other settings, place ":highlight" commands AFTER --- the setting of the 'background' option. --- --- @type string vim.o.background = "dark" vim.o.bg = vim.o.background vim.go.background = vim.o.background vim.go.bg = vim.go.background --- Influences the working of , , CTRL-W and CTRL-U in Insert --- mode. This is a list of items, separated by commas. Each item allows --- a way to backspace over something: --- value effect ~ --- indent allow backspacing over autoindent --- eol allow backspacing over line breaks (join lines) --- start allow backspacing over the start of insert; CTRL-W and CTRL-U --- stop once at the start of insert. --- nostop like start, except CTRL-W and CTRL-U do not stop at the start of --- insert. --- --- When the value is empty, Vi compatible backspacing is used, none of --- the ways mentioned for the items above are possible. --- --- @type string vim.o.backspace = "indent,eol,start" vim.o.bs = vim.o.backspace vim.go.backspace = vim.o.backspace vim.go.bs = vim.go.backspace --- Make a backup before overwriting a file. Leave it around after the --- file has been successfully written. If you do not want to keep the --- backup file, but you do want a backup while the file is being --- written, reset this option and set the 'writebackup' option (this is --- the default). If you do not want a backup file at all reset both --- options (use this if your file system is almost full). See the --- `backup-table` for more explanations. --- When the 'backupskip' pattern matches, a backup is not made anyway. --- When 'patchmode' is set, the backup may be renamed to become the --- oldest version of a file. --- --- @type boolean vim.o.backup = false vim.o.bk = vim.o.backup vim.go.backup = vim.o.backup vim.go.bk = vim.go.backup --- When writing a file and a backup is made, this option tells how it's --- done. This is a comma-separated list of words. --- --- The main values are: --- "yes" make a copy of the file and overwrite the original one --- "no" rename the file and write a new one --- "auto" one of the previous, what works best --- --- Extra values that can be combined with the ones above are: --- "breaksymlink" always break symlinks when writing --- "breakhardlink" always break hardlinks when writing --- --- Making a copy and overwriting the original file: --- - Takes extra time to copy the file. --- + When the file has special attributes, is a (hard/symbolic) link or --- has a resource fork, all this is preserved. --- - When the file is a link the backup will have the name of the link, --- not of the real file. --- --- Renaming the file and writing a new one: --- + It's fast. --- - Sometimes not all attributes of the file can be copied to the new --- file. --- - When the file is a link the new file will not be a link. --- --- The "auto" value is the middle way: When Vim sees that renaming the --- file is possible without side effects (the attributes can be passed on --- and the file is not a link) that is used. When problems are expected, --- a copy will be made. --- --- The "breaksymlink" and "breakhardlink" values can be used in --- combination with any of "yes", "no" and "auto". When included, they --- force Vim to always break either symbolic or hard links by doing --- exactly what the "no" option does, renaming the original file to --- become the backup and writing a new file in its place. This can be --- useful for example in source trees where all the files are symbolic or --- hard links and any changes should stay in the local source tree, not --- be propagated back to the original source. --- *crontab* --- One situation where "no" and "auto" will cause problems: A program --- that opens a file, invokes Vim to edit that file, and then tests if --- the open file was changed (through the file descriptor) will check the --- backup file instead of the newly created file. "crontab -e" is an --- example, as are several `file-watcher` daemons like inotify. In that --- case you probably want to switch this option. --- --- When a copy is made, the original file is truncated and then filled --- with the new text. This means that protection bits, owner and --- symbolic links of the original file are unmodified. The backup file, --- however, is a new file, owned by the user who edited the file. The --- group of the backup is set to the group of the original file. If this --- fails, the protection bits for the group are made the same as for --- others. --- --- When the file is renamed, this is the other way around: The backup has --- the same attributes of the original file, and the newly written file --- is owned by the current user. When the file was a (hard/symbolic) --- link, the new file will not! That's why the "auto" value doesn't --- rename when the file is a link. The owner and group of the newly --- written file will be set to the same ones as the original file, but --- the system may refuse to do this. In that case the "auto" value will --- again not rename the file. --- --- @type string vim.o.backupcopy = "auto" vim.o.bkc = vim.o.backupcopy vim.bo.backupcopy = vim.o.backupcopy vim.bo.bkc = vim.bo.backupcopy vim.go.backupcopy = vim.o.backupcopy vim.go.bkc = vim.go.backupcopy --- List of directories for the backup file, separated with commas. --- - The backup file will be created in the first directory in the list --- where this is possible. If none of the directories exist Nvim will --- attempt to create the last directory in the list. --- - Empty means that no backup file will be created ('patchmode' is --- impossible!). Writing may fail because of this. --- - A directory "." means to put the backup file in the same directory --- as the edited file. --- - A directory starting with "./" (or ".\" for MS-Windows) means to put --- the backup file relative to where the edited file is. The leading --- "." is replaced with the path name of the edited file. --- ("." inside a directory name has no special meaning). --- - Spaces after the comma are ignored, other spaces are considered part --- of the directory name. To have a space at the start of a directory --- name, precede it with a backslash. --- - To include a comma in a directory name precede it with a backslash. --- - A directory name may end in an '/'. --- - For Unix and Win32, if a directory ends in two path separators "//", --- the swap file name will be built from the complete path to the file --- with all path separators changed to percent '%' signs. This will --- ensure file name uniqueness in the backup directory. --- On Win32, it is also possible to end with "\\". However, When a --- separating comma is following, you must use "//", since "\\" will --- include the comma in the file name. Therefore it is recommended to --- use '//', instead of '\\'. --- - Environment variables are expanded `:set_env`. --- - Careful with '\' characters, type one before a space, type two to --- get one in the option (see `option-backslash`), for example: --- --- ```vim --- set bdir=c:\\tmp,\ dir\\,with\\,commas,\\\ dir\ with\ spaces --- ``` --- --- See also 'backup' and 'writebackup' options. --- If you want to hide your backup files on Unix, consider this value: --- --- ```vim --- set backupdir=./.backup,~/.backup,.,/tmp --- ``` --- You must create a ".backup" directory in each directory and in your --- home directory for this to work properly. --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- directories from the list. This avoids problems when a future version --- uses another default. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.backupdir = ".,$XDG_STATE_HOME/nvim/backup//" vim.o.bdir = vim.o.backupdir vim.go.backupdir = vim.o.backupdir vim.go.bdir = vim.go.backupdir --- String which is appended to a file name to make the name of the --- backup file. The default is quite unusual, because this avoids --- accidentally overwriting existing files with a backup file. You might --- prefer using ".bak", but make sure that you don't have files with --- ".bak" that you want to keep. --- Only normal file name characters can be used; `/\*?[|<>` are illegal. --- --- If you like to keep a lot of backups, you could use a BufWritePre --- autocommand to change 'backupext' just before writing the file to --- include a timestamp. --- --- ```vim --- au BufWritePre * let &bex = '-' .. strftime("%Y%b%d%X") .. '~' --- ``` --- Use 'backupdir' to put the backup in a different directory. --- --- @type string vim.o.backupext = "~" vim.o.bex = vim.o.backupext vim.go.backupext = vim.o.backupext vim.go.bex = vim.go.backupext --- A list of file patterns. When one of the patterns matches with the --- name of the file which is written, no backup file is created. Both --- the specified file name and the full path name of the file are used. --- The pattern is used like with `:autocmd`, see `autocmd-pattern`. --- Watch out for special characters, see `option-backslash`. --- When $TMPDIR, $TMP or $TEMP is not defined, it is not used for the --- default value. "/tmp/*" is only used for Unix. --- --- WARNING: Not having a backup file means that when Vim fails to write --- your buffer correctly and then, for whatever reason, Vim exits, you --- lose both the original file and what you were writing. Only disable --- backups if you don't care about losing the file. --- --- Note that environment variables are not expanded. If you want to use --- $HOME you must expand it explicitly, e.g.: --- --- ```vim --- let &backupskip = escape(expand('$HOME'), '\') .. '/tmp/*' --- ``` --- Note that the default also makes sure that "crontab -e" works (when a --- backup would be made by renaming the original file crontab won't see --- the newly created file). Also see 'backupcopy' and `crontab`. --- --- @type string vim.o.backupskip = "/tmp/*" vim.o.bsk = vim.o.backupskip vim.go.backupskip = vim.o.backupskip vim.go.bsk = vim.go.backupskip --- Specifies for which events the bell will not be rung. It is a comma- --- separated list of items. For each item that is present, the bell --- will be silenced. This is most useful to specify specific events in --- insert mode to be silenced. --- You can also make it flash by using 'visualbell'. --- --- item meaning when present ~ --- all All events. --- backspace When hitting or and deleting results in an --- error. --- cursor Fail to move around using the cursor keys or --- / in `Insert-mode`. --- complete Error occurred when using `i_CTRL-X_CTRL-K` or --- `i_CTRL-X_CTRL-T`. --- copy Cannot copy char from insert mode using `i_CTRL-Y` or --- `i_CTRL-E`. --- ctrlg Unknown Char after in Insert mode. --- error Other Error occurred (e.g. try to join last line) --- (mostly used in `Normal-mode` or `Cmdline-mode`). --- esc hitting in `Normal-mode`. --- hangul Ignored. --- lang Calling the beep module for Lua/Mzscheme/TCL. --- mess No output available for `g<`. --- showmatch Error occurred for 'showmatch' function. --- operator Empty region error `cpo-E`. --- register Unknown register after in `Insert-mode`. --- shell Bell from shell output `:!`. --- spell Error happened on spell suggest. --- term Bell from `:terminal` output. --- wildmode More matches in `cmdline-completion` available --- (depends on the 'wildmode' setting). --- --- This is most useful to fine tune when in Insert mode the bell should --- be rung. For Normal mode and Ex commands, the bell is often rung to --- indicate that an error occurred. It can be silenced by adding the --- "error" keyword. --- --- @type string vim.o.belloff = "all" vim.o.bo = vim.o.belloff vim.go.belloff = vim.o.belloff vim.go.bo = vim.go.belloff --- This option should be set before editing a binary file. You can also --- use the `-b` Vim argument. When this option is switched on a few --- options will be changed (also when it already was on): --- 'textwidth' will be set to 0 --- 'wrapmargin' will be set to 0 --- 'modeline' will be off --- 'expandtab' will be off --- Also, 'fileformat' and 'fileformats' options will not be used, the --- file is read and written like 'fileformat' was "unix" (a single --- separates lines). --- The 'fileencoding' and 'fileencodings' options will not be used, the --- file is read without conversion. --- NOTE: When you start editing a(nother) file while the 'bin' option is --- on, settings from autocommands may change the settings again (e.g., --- 'textwidth'), causing trouble when editing. You might want to set --- 'bin' again when the file has been loaded. --- The previous values of these options are remembered and restored when --- 'bin' is switched from on to off. Each buffer has its own set of --- saved option values. --- To edit a file with 'binary' set you can use the `++bin` argument. --- This avoids you have to do ":set bin", which would have effect for all --- files you edit. --- When writing a file the for the last line is only written if --- there was one in the original file (normally Vim appends an to --- the last line if there is none; this would make the file longer). See --- the 'endofline' option. --- --- @type boolean vim.o.binary = false vim.o.bin = vim.o.binary vim.bo.binary = vim.o.binary vim.bo.bin = vim.bo.binary --- When writing a file and the following conditions are met, a BOM (Byte --- Order Mark) is prepended to the file: --- - this option is on --- - the 'binary' option is off --- - 'fileencoding' is "utf-8", "ucs-2", "ucs-4" or one of the little/big --- endian variants. --- Some applications use the BOM to recognize the encoding of the file. --- Often used for UCS-2 files on MS-Windows. For other applications it --- causes trouble, for example: "cat file1 file2" makes the BOM of file2 --- appear halfway through the resulting file. Gcc doesn't accept a BOM. --- When Vim reads a file and 'fileencodings' starts with "ucs-bom", a --- check for the presence of the BOM is done and 'bomb' set accordingly. --- Unless 'binary' is set, it is removed from the first line, so that you --- don't see it when editing. When you don't change the options, the BOM --- will be restored when writing the file. --- --- @type boolean vim.o.bomb = false vim.bo.bomb = vim.o.bomb --- This option lets you choose which characters might cause a line --- break if 'linebreak' is on. Only works for ASCII characters. --- --- @type string vim.o.breakat = " \t!@*-+;:,./?" vim.o.brk = vim.o.breakat vim.go.breakat = vim.o.breakat vim.go.brk = vim.go.breakat --- Every wrapped line will continue visually indented (same amount of --- space as the beginning of that line), thus preserving horizontal blocks --- of text. --- --- @type boolean vim.o.breakindent = false vim.o.bri = vim.o.breakindent vim.wo.breakindent = vim.o.breakindent vim.wo.bri = vim.wo.breakindent --- Settings for 'breakindent'. It can consist of the following optional --- items and must be separated by a comma: --- min:{n} Minimum text width that will be kept after --- applying 'breakindent', even if the resulting --- text should normally be narrower. This prevents --- text indented almost to the right window border --- occupying lots of vertical space when broken. --- (default: 20) --- shift:{n} After applying 'breakindent', the wrapped line's --- beginning will be shifted by the given number of --- characters. It permits dynamic French paragraph --- indentation (negative) or emphasizing the line --- continuation (positive). --- (default: 0) --- sbr Display the 'showbreak' value before applying the --- additional indent. --- (default: off) --- list:{n} Adds an additional indent for lines that match a --- numbered or bulleted list (using the --- 'formatlistpat' setting). --- (default: 0) --- list:-1 Uses the width of a match with 'formatlistpat' for --- indentation. --- column:{n} Indent at column {n}. Will overrule the other --- sub-options. Note: an additional indent may be --- added for the 'showbreak' setting. --- (default: off) --- --- @type string vim.o.breakindentopt = "" vim.o.briopt = vim.o.breakindentopt vim.wo.breakindentopt = vim.o.breakindentopt vim.wo.briopt = vim.wo.breakindentopt --- This option specifies what happens when a buffer is no longer --- displayed in a window: --- follow the global 'hidden' option --- hide hide the buffer (don't unload it), even if 'hidden' is --- not set --- unload unload the buffer, even if 'hidden' is set; the --- `:hide` command will also unload the buffer --- delete delete the buffer from the buffer list, even if --- 'hidden' is set; the `:hide` command will also delete --- the buffer, making it behave like `:bdelete` --- wipe wipe the buffer from the buffer list, even if --- 'hidden' is set; the `:hide` command will also wipe --- out the buffer, making it behave like `:bwipeout` --- --- CAREFUL: when "unload", "delete" or "wipe" is used changes in a buffer --- are lost without a warning. Also, these values may break autocommands --- that switch between buffers temporarily. --- This option is used together with 'buftype' and 'swapfile' to specify --- special kinds of buffers. See `special-buffers`. --- --- @type string vim.o.bufhidden = "" vim.o.bh = vim.o.bufhidden vim.bo.bufhidden = vim.o.bufhidden vim.bo.bh = vim.bo.bufhidden --- When this option is set, the buffer shows up in the buffer list. If --- it is reset it is not used for ":bnext", "ls", the Buffers menu, etc. --- This option is reset by Vim for buffers that are only used to remember --- a file name or marks. Vim sets it when starting to edit a buffer. --- But not when moving to a buffer with ":buffer". --- --- @type boolean vim.o.buflisted = true vim.o.bl = vim.o.buflisted vim.bo.buflisted = vim.o.buflisted vim.bo.bl = vim.bo.buflisted --- The value of this option specifies the type of a buffer: --- normal buffer --- acwrite buffer will always be written with `BufWriteCmd`s --- help help buffer (do not set this manually) --- nofile buffer is not related to a file, will not be written --- nowrite buffer will not be written --- quickfix list of errors `:cwindow` or locations `:lwindow` --- terminal `terminal-emulator` buffer --- prompt buffer where only the last line can be edited, meant --- to be used by a plugin, see `prompt-buffer` --- --- This option is used together with 'bufhidden' and 'swapfile' to --- specify special kinds of buffers. See `special-buffers`. --- Also see `win_gettype()`, which returns the type of the window. --- --- Be careful with changing this option, it can have many side effects! --- One such effect is that Vim will not check the timestamp of the file, --- if the file is changed by another program this will not be noticed. --- --- A "quickfix" buffer is only used for the error list and the location --- list. This value is set by the `:cwindow` and `:lwindow` commands and --- you are not supposed to change it. --- --- "nofile" and "nowrite" buffers are similar: --- both: The buffer is not to be written to disk, ":w" doesn't --- work (":w filename" does work though). --- both: The buffer is never considered to be `'modified'`. --- There is no warning when the changes will be lost, for --- example when you quit Vim. --- both: A swap file is only created when using too much memory --- (when 'swapfile' has been reset there is never a swap --- file). --- nofile only: The buffer name is fixed, it is not handled like a --- file name. It is not modified in response to a `:cd` --- command. --- both: When using ":e bufname" and already editing "bufname" --- the buffer is made empty and autocommands are --- triggered as usual for `:edit`. --- *E676* --- "acwrite" implies that the buffer name is not related to a file, like --- "nofile", but it will be written. Thus, in contrast to "nofile" and --- "nowrite", ":w" does work and a modified buffer can't be abandoned --- without saving. For writing there must be matching `BufWriteCmd|, --- |FileWriteCmd` or `FileAppendCmd` autocommands. --- --- @type string vim.o.buftype = "" vim.o.bt = vim.o.buftype vim.bo.buftype = vim.o.buftype vim.bo.bt = vim.bo.buftype --- Specifies details about changing the case of letters. It may contain --- these words, separated by a comma: --- internal Use internal case mapping functions, the current --- locale does not change the case mapping. When --- "internal" is omitted, the towupper() and towlower() --- system library functions are used when available. --- keepascii For the ASCII characters (0x00 to 0x7f) use the US --- case mapping, the current locale is not effective. --- This probably only matters for Turkish. --- --- @type string vim.o.casemap = "internal,keepascii" vim.o.cmp = vim.o.casemap vim.go.casemap = vim.o.casemap vim.go.cmp = vim.go.casemap --- When on, `:cd`, `:tcd` and `:lcd` without an argument changes the --- current working directory to the `$HOME` directory like in Unix. --- When off, those commands just print the current directory name. --- On Unix this option has no effect. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type boolean vim.o.cdhome = false vim.o.cdh = vim.o.cdhome vim.go.cdhome = vim.o.cdhome vim.go.cdh = vim.go.cdhome --- This is a list of directories which will be searched when using the --- `:cd`, `:tcd` and `:lcd` commands, provided that the directory being --- searched for has a relative path, not an absolute part starting with --- "/", "./" or "../", the 'cdpath' option is not used then. --- The 'cdpath' option's value has the same form and semantics as --- `'path'`. Also see `file-searching`. --- The default value is taken from $CDPATH, with a "," prepended to look --- in the current directory first. --- If the default value taken from $CDPATH is not what you want, include --- a modified version of the following command in your vimrc file to --- override it: --- --- ```vim --- let &cdpath = ',' .. substitute(substitute($CDPATH, '[, ]', '\\\0', 'g'), ':', ',', 'g') --- ``` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- (parts of 'cdpath' can be passed to the shell to expand file names). --- --- @type string vim.o.cdpath = ",," vim.o.cd = vim.o.cdpath vim.go.cdpath = vim.o.cdpath vim.go.cd = vim.go.cdpath --- The key used in Command-line Mode to open the command-line window. --- Only non-printable keys are allowed. --- The key can be specified as a single character, but it is difficult to --- type. The preferred way is to use `key-notation` (e.g. , ) or --- a letter preceded with a caret (e.g. `^F` is CTRL-F). Examples: --- --- ```vim --- set cedit=^Y --- set cedit= --- ``` --- `Nvi` also has this option, but it only uses the first character. --- See `cmdwin`. --- --- @type string vim.o.cedit = "\6" vim.go.cedit = vim.o.cedit --- `channel` connected to the buffer, or 0 if no channel is connected. --- In a `:terminal` buffer this is the terminal channel. --- Read-only. --- --- @type integer vim.o.channel = 0 vim.bo.channel = vim.o.channel --- An expression that is used for character encoding conversion. It is --- evaluated when a file that is to be read or has been written has a --- different encoding from what is desired. --- 'charconvert' is not used when the internal iconv() function is --- supported and is able to do the conversion. Using iconv() is --- preferred, because it is much faster. --- 'charconvert' is not used when reading stdin `--`, because there is no --- file to convert from. You will have to save the text in a file first. --- The expression must return zero, false or an empty string for success, --- non-zero or true for failure. --- See `encoding-names` for possible encoding names. --- Additionally, names given in 'fileencodings' and 'fileencoding' are --- used. --- Conversion between "latin1", "unicode", "ucs-2", "ucs-4" and "utf-8" --- is done internally by Vim, 'charconvert' is not used for this. --- Also used for Unicode conversion. --- Example: --- --- ```vim --- set charconvert=CharConvert() --- fun CharConvert() --- system("recode " --- \ .. v:charconvert_from .. ".." .. v:charconvert_to --- \ .. " <" .. v:fname_in .. " >" .. v:fname_out) --- return v:shell_error --- endfun --- ``` --- The related Vim variables are: --- v:charconvert_from name of the current encoding --- v:charconvert_to name of the desired encoding --- v:fname_in name of the input file --- v:fname_out name of the output file --- Note that v:fname_in and v:fname_out will never be the same. --- --- The advantage of using a function call without arguments is that it is --- faster, see `expr-option-function`. --- --- If the 'charconvert' expression starts with s: or ``, then it is --- replaced with the script ID (`local-function`). Example: --- --- ```vim --- set charconvert=s:MyConvert() --- set charconvert=SomeConvert() --- ``` --- Otherwise the expression is evaluated in the context of the script --- where the option was set, thus script-local items are available. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.charconvert = "" vim.o.ccv = vim.o.charconvert vim.go.charconvert = vim.o.charconvert vim.go.ccv = vim.go.charconvert --- Enables automatic C program indenting. See 'cinkeys' to set the keys --- that trigger reindenting in insert mode and 'cinoptions' to set your --- preferred indent style. --- If 'indentexpr' is not empty, it overrules 'cindent'. --- If 'lisp' is not on and both 'indentexpr' and 'equalprg' are empty, --- the "=" operator indents using this algorithm rather than calling an --- external program. --- See `C-indenting`. --- When you don't like the way 'cindent' works, try the 'smartindent' --- option or 'indentexpr'. --- --- @type boolean vim.o.cindent = false vim.o.cin = vim.o.cindent vim.bo.cindent = vim.o.cindent vim.bo.cin = vim.bo.cindent --- A list of keys that, when typed in Insert mode, cause reindenting of --- the current line. Only used if 'cindent' is on and 'indentexpr' is --- empty. --- For the format of this option see `cinkeys-format`. --- See `C-indenting`. --- --- @type string vim.o.cinkeys = "0{,0},0),0],:,0#,!^F,o,O,e" vim.o.cink = vim.o.cinkeys vim.bo.cinkeys = vim.o.cinkeys vim.bo.cink = vim.bo.cinkeys --- The 'cinoptions' affect the way 'cindent' reindents lines in a C --- program. See `cinoptions-values` for the values of this option, and --- `C-indenting` for info on C indenting in general. --- --- @type string vim.o.cinoptions = "" vim.o.cino = vim.o.cinoptions vim.bo.cinoptions = vim.o.cinoptions vim.bo.cino = vim.bo.cinoptions --- Keywords that are interpreted as a C++ scope declaration by `cino-g`. --- Useful e.g. for working with the Qt framework that defines additional --- scope declarations "signals", "public slots" and "private slots": --- --- ```vim --- set cinscopedecls+=signals,public\ slots,private\ slots --- ``` --- --- --- @type string vim.o.cinscopedecls = "public,protected,private" vim.o.cinsd = vim.o.cinscopedecls vim.bo.cinscopedecls = vim.o.cinscopedecls vim.bo.cinsd = vim.bo.cinscopedecls --- These keywords start an extra indent in the next line when --- 'smartindent' or 'cindent' is set. For 'cindent' this is only done at --- an appropriate place (inside {}). --- Note that 'ignorecase' isn't used for 'cinwords'. If case doesn't --- matter, include the keyword both the uppercase and lowercase: --- "if,If,IF". --- --- @type string vim.o.cinwords = "if,else,while,do,for,switch" vim.o.cinw = vim.o.cinwords vim.bo.cinwords = vim.o.cinwords vim.bo.cinw = vim.bo.cinwords --- This option is a list of comma-separated names. --- These names are recognized: --- --- *clipboard-unnamed* --- unnamed When included, Vim will use the clipboard register "*" --- for all yank, delete, change and put operations which --- would normally go to the unnamed register. When a --- register is explicitly specified, it will always be --- used regardless of whether "unnamed" is in 'clipboard' --- or not. The clipboard register can always be --- explicitly accessed using the "* notation. Also see --- `clipboard`. --- --- *clipboard-unnamedplus* --- unnamedplus A variant of the "unnamed" flag which uses the --- clipboard register "+" (`quoteplus`) instead of --- register "*" for all yank, delete, change and put --- operations which would normally go to the unnamed --- register. When "unnamed" is also included to the --- option, yank and delete operations (but not put) --- will additionally copy the text into register --- "*". See `clipboard`. --- --- @type string vim.o.clipboard = "" vim.o.cb = vim.o.clipboard vim.go.clipboard = vim.o.clipboard vim.go.cb = vim.go.clipboard --- Number of screen lines to use for the command-line. Helps avoiding --- `hit-enter` prompts. --- The value of this option is stored with the tab page, so that each tab --- page can have a different value. --- --- When 'cmdheight' is zero, there is no command-line unless it is being --- used. The command-line will cover the last line of the screen when --- shown. --- --- WARNING: `cmdheight=0` is EXPERIMENTAL. Expect some unwanted behaviour. --- Some 'shortmess' flags and similar mechanism might fail to take effect, --- causing unwanted hit-enter prompts. Some informative messages, both --- from Nvim itself and plugins, will not be displayed. --- --- @type integer vim.o.cmdheight = 1 vim.o.ch = vim.o.cmdheight vim.go.cmdheight = vim.o.cmdheight vim.go.ch = vim.go.cmdheight --- Number of screen lines to use for the command-line window. `cmdwin` --- --- @type integer vim.o.cmdwinheight = 7 vim.o.cwh = vim.o.cmdwinheight vim.go.cmdwinheight = vim.o.cmdwinheight vim.go.cwh = vim.go.cmdwinheight --- 'colorcolumn' is a comma-separated list of screen columns that are --- highlighted with ColorColumn `hl-ColorColumn`. Useful to align --- text. Will make screen redrawing slower. --- The screen column can be an absolute number, or a number preceded with --- '+' or '-', which is added to or subtracted from 'textwidth'. --- --- ```vim --- --- set cc=+1 " highlight column after 'textwidth' --- set cc=+1,+2,+3 " highlight three columns after 'textwidth' --- hi ColorColumn ctermbg=lightgrey guibg=lightgrey --- ``` --- --- When 'textwidth' is zero then the items with '-' and '+' are not used. --- A maximum of 256 columns are highlighted. --- --- @type string vim.o.colorcolumn = "" vim.o.cc = vim.o.colorcolumn vim.wo.colorcolumn = vim.o.colorcolumn vim.wo.cc = vim.wo.colorcolumn --- Number of columns of the screen. Normally this is set by the terminal --- initialization and does not have to be set by hand. --- When Vim is running in the GUI or in a resizable window, setting this --- option will cause the window size to be changed. When you only want --- to use the size for the GUI, put the command in your `ginit.vim` file. --- When you set this option and Vim is unable to change the physical --- number of columns of the display, the display may be messed up. For --- the GUI it is always possible and Vim limits the number of columns to --- what fits on the screen. You can use this command to get the widest --- window possible: --- --- ```vim --- set columns=9999 --- ``` --- Minimum value is 12, maximum value is 10000. --- --- @type integer vim.o.columns = 80 vim.o.co = vim.o.columns vim.go.columns = vim.o.columns vim.go.co = vim.go.columns --- A comma-separated list of strings that can start a comment line. See --- `format-comments`. See `option-backslash` about using backslashes to --- insert a space. --- --- @type string vim.o.comments = "s1:/*,mb:*,ex:*/,://,b:#,:%,:XCOMM,n:>,fb:-,fb:•" vim.o.com = vim.o.comments vim.bo.comments = vim.o.comments vim.bo.com = vim.bo.comments --- A template for a comment. The "%s" in the value is replaced with the --- comment text, and should be padded with a space when possible. --- Used for `commenting` and to add markers for folding, see `fold-marker`. --- --- @type string vim.o.commentstring = "" vim.o.cms = vim.o.commentstring vim.bo.commentstring = vim.o.commentstring vim.bo.cms = vim.bo.commentstring --- This option specifies how keyword completion `ins-completion` works --- when CTRL-P or CTRL-N are used. It is also used for whole-line --- completion `i_CTRL-X_CTRL-L`. It indicates the type of completion --- and the places to scan. It is a comma-separated list of flags: --- . scan the current buffer ('wrapscan' is ignored) --- w scan buffers from other windows --- b scan other loaded buffers that are in the buffer list --- u scan the unloaded buffers that are in the buffer list --- U scan the buffers that are not in the buffer list --- k scan the files given with the 'dictionary' option --- kspell use the currently active spell checking `spell` --- k{dict} scan the file {dict}. Several "k" flags can be given, --- patterns are valid too. For example: --- --- ```vim --- set cpt=k/usr/dict/*,k~/spanish --- ``` --- s scan the files given with the 'thesaurus' option --- s{tsr} scan the file {tsr}. Several "s" flags can be given, patterns --- are valid too. --- i scan current and included files --- d scan current and included files for defined name or macro --- `i_CTRL-X_CTRL-D` --- ] tag completion --- t same as "]" --- f scan the buffer names (as opposed to buffer contents) --- --- Unloaded buffers are not loaded, thus their autocmds `:autocmd` are --- not executed, this may lead to unexpected completions from some files --- (gzipped files for example). Unloaded buffers are not scanned for --- whole-line completion. --- --- As you can see, CTRL-N and CTRL-P can be used to do any 'iskeyword'- --- based expansion (e.g., dictionary `i_CTRL-X_CTRL-K`, included patterns --- `i_CTRL-X_CTRL-I`, tags `i_CTRL-X_CTRL-]` and normal expansions). --- --- @type string vim.o.complete = ".,w,b,u,t" vim.o.cpt = vim.o.complete vim.bo.complete = vim.o.complete vim.bo.cpt = vim.bo.complete --- This option specifies a function to be used for Insert mode completion --- with CTRL-X CTRL-U. `i_CTRL-X_CTRL-U` --- See `complete-functions` for an explanation of how the function is --- invoked and what it should return. The value can be the name of a --- function, a `lambda` or a `Funcref`. See `option-value-function` for --- more information. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.completefunc = "" vim.o.cfu = vim.o.completefunc vim.bo.completefunc = vim.o.completefunc vim.bo.cfu = vim.bo.completefunc --- A comma-separated list of `complete-items` that controls the alignment --- and display order of items in the popup menu during Insert mode --- completion. The supported values are abbr, kind, and menu. These --- options allow to customize how the completion items are shown in the --- popup menu. Note: must always contain those three values in any --- order. --- --- @type string vim.o.completeitemalign = "abbr,kind,menu" vim.o.cia = vim.o.completeitemalign vim.go.completeitemalign = vim.o.completeitemalign vim.go.cia = vim.go.completeitemalign --- A comma-separated list of options for Insert mode completion --- `ins-completion`. The supported values are: --- --- menu Use a popup menu to show the possible completions. The --- menu is only shown when there is more than one match and --- sufficient colors are available. `ins-completion-menu` --- --- menuone Use the popup menu also when there is only one match. --- Useful when there is additional information about the --- match, e.g., what file it comes from. --- --- longest Only insert the longest common text of the matches. If --- the menu is displayed you can use CTRL-L to add more --- characters. Whether case is ignored depends on the kind --- of completion. For buffer text the 'ignorecase' option is --- used. --- --- preview Show extra information about the currently selected --- completion in the preview window. Only works in --- combination with "menu" or "menuone". --- --- popup Show extra information about the currently selected --- completion in a popup window. Only works in combination --- with "menu" or "menuone". Overrides "preview". --- --- noinsert Do not insert any text for a match until the user selects --- a match from the menu. Only works in combination with --- "menu" or "menuone". No effect if "longest" is present. --- --- noselect Do not select a match in the menu, force the user to --- select one from the menu. Only works in combination with --- "menu" or "menuone". --- --- fuzzy Enable `fuzzy-matching` for completion candidates. This --- allows for more flexible and intuitive matching, where --- characters can be skipped and matches can be found even --- if the exact sequence is not typed. Only makes a --- difference how completion candidates are reduced from the --- list of alternatives, but not how the candidates are --- collected (using different completion types). --- --- @type string vim.o.completeopt = "menu,preview" vim.o.cot = vim.o.completeopt vim.bo.completeopt = vim.o.completeopt vim.bo.cot = vim.bo.completeopt vim.go.completeopt = vim.o.completeopt vim.go.cot = vim.go.completeopt --- only modifiable in MS-Windows --- When this option is set it overrules 'shellslash' for completion: --- - When this option is set to "slash", a forward slash is used for path --- completion in insert mode. This is useful when editing HTML tag, or --- Makefile with 'noshellslash' on MS-Windows. --- - When this option is set to "backslash", backslash is used. This is --- useful when editing a batch file with 'shellslash' set on MS-Windows. --- - When this option is empty, same character is used as for --- 'shellslash'. --- For Insert mode completion the buffer-local value is used. For --- command line completion the global value is used. --- --- @type string vim.o.completeslash = "" vim.o.csl = vim.o.completeslash vim.bo.completeslash = vim.o.completeslash vim.bo.csl = vim.bo.completeslash --- Sets the modes in which text in the cursor line can also be concealed. --- When the current mode is listed then concealing happens just like in --- other lines. --- n Normal mode --- v Visual mode --- i Insert mode --- c Command line editing, for 'incsearch' --- --- 'v' applies to all lines in the Visual area, not only the cursor. --- A useful value is "nc". This is used in help files. So long as you --- are moving around text is concealed, but when starting to insert text --- or selecting a Visual area the concealed text is displayed, so that --- you can see what you are doing. --- Keep in mind that the cursor position is not always where it's --- displayed. E.g., when moving vertically it may change column. --- --- @type string vim.o.concealcursor = "" vim.o.cocu = vim.o.concealcursor vim.wo.concealcursor = vim.o.concealcursor vim.wo.cocu = vim.wo.concealcursor --- Determine how text with the "conceal" syntax attribute `:syn-conceal` --- is shown: --- --- Value Effect ~ --- 0 Text is shown normally --- 1 Each block of concealed text is replaced with one --- character. If the syntax item does not have a custom --- replacement character defined (see `:syn-cchar`) the --- character defined in 'listchars' is used. --- It is highlighted with the "Conceal" highlight group. --- 2 Concealed text is completely hidden unless it has a --- custom replacement character defined (see --- `:syn-cchar`). --- 3 Concealed text is completely hidden. --- --- Note: in the cursor line concealed text is not hidden, so that you can --- edit and copy the text. This can be changed with the 'concealcursor' --- option. --- --- @type integer vim.o.conceallevel = 0 vim.o.cole = vim.o.conceallevel vim.wo.conceallevel = vim.o.conceallevel vim.wo.cole = vim.wo.conceallevel --- When 'confirm' is on, certain operations that would normally --- fail because of unsaved changes to a buffer, e.g. ":q" and ":e", --- instead raise a dialog asking if you wish to save the current --- file(s). You can still use a ! to unconditionally `abandon` a buffer. --- If 'confirm' is off you can still activate confirmation for one --- command only (this is most useful in mappings) with the `:confirm` --- command. --- Also see the `confirm()` function and the 'v' flag in 'guioptions'. --- --- @type boolean vim.o.confirm = false vim.o.cf = vim.o.confirm vim.go.confirm = vim.o.confirm vim.go.cf = vim.go.confirm --- Copy the structure of the existing lines indent when autoindenting a --- new line. Normally the new indent is reconstructed by a series of --- tabs followed by spaces as required (unless `'expandtab'` is enabled, --- in which case only spaces are used). Enabling this option makes the --- new line copy whatever characters were used for indenting on the --- existing line. 'expandtab' has no effect on these characters, a Tab --- remains a Tab. If the new indent is greater than on the existing --- line, the remaining space is filled in the normal manner. --- See 'preserveindent'. --- --- @type boolean vim.o.copyindent = false vim.o.ci = vim.o.copyindent vim.bo.copyindent = vim.o.copyindent vim.bo.ci = vim.bo.copyindent --- A sequence of single character flags. When a character is present --- this indicates Vi-compatible behavior. This is used for things where --- not being Vi-compatible is mostly or sometimes preferred. --- 'cpoptions' stands for "compatible-options". --- Commas can be added for readability. --- To avoid problems with flags that are added in the future, use the --- "+=" and "-=" feature of ":set" `add-option-flags`. --- --- contains behavior ~ --- *cpo-a* --- a When included, a ":read" command with a file name --- argument will set the alternate file name for the --- current window. --- *cpo-A* --- A When included, a ":write" command with a file name --- argument will set the alternate file name for the --- current window. --- *cpo-b* --- b "\|" in a ":map" command is recognized as the end of --- the map command. The '\' is included in the mapping, --- the text after the '|' is interpreted as the next --- command. Use a CTRL-V instead of a backslash to --- include the '|' in the mapping. Applies to all --- mapping, abbreviation, menu and autocmd commands. --- See also `map_bar`. --- *cpo-B* --- B A backslash has no special meaning in mappings, --- abbreviations, user commands and the "to" part of the --- menu commands. Remove this flag to be able to use a --- backslash like a CTRL-V. For example, the command --- ":map X \\" results in X being mapped to: --- 'B' included: "\^[" (^[ is a real ) --- 'B' excluded: "" (5 characters) --- *cpo-c* --- c Searching continues at the end of any match at the --- cursor position, but not further than the start of the --- next line. When not present searching continues --- one character from the cursor position. With 'c' --- "abababababab" only gets three matches when repeating --- "/abab", without 'c' there are five matches. --- *cpo-C* --- C Do not concatenate sourced lines that start with a --- backslash. See `line-continuation`. --- *cpo-d* --- d Using "./" in the 'tags' option doesn't mean to use --- the tags file relative to the current file, but the --- tags file in the current directory. --- *cpo-D* --- D Can't use CTRL-K to enter a digraph after Normal mode --- commands with a character argument, like `r`, `f` and --- `t`. --- *cpo-e* --- e When executing a register with ":@r", always add a --- to the last line, also when the register is not --- linewise. If this flag is not present, the register --- is not linewise and the last line does not end in a --- , then the last line is put on the command-line --- and can be edited before hitting . --- *cpo-E* --- E It is an error when using "y", "d", "c", "g~", "gu" or --- "gU" on an Empty region. The operators only work when --- at least one character is to be operated on. Example: --- This makes "y0" fail in the first column. --- *cpo-f* --- f When included, a ":read" command with a file name --- argument will set the file name for the current buffer, --- if the current buffer doesn't have a file name yet. --- *cpo-F* --- F When included, a ":write" command with a file name --- argument will set the file name for the current --- buffer, if the current buffer doesn't have a file name --- yet. Also see `cpo-P`. --- *cpo-i* --- i When included, interrupting the reading of a file will --- leave it modified. --- *cpo-I* --- I When moving the cursor up or down just after inserting --- indent for 'autoindent', do not delete the indent. --- *cpo-J* --- J A `sentence` has to be followed by two spaces after --- the '.', '!' or '?'. A is not recognized as --- white space. --- *cpo-K* --- K Don't wait for a key code to complete when it is --- halfway through a mapping. This breaks mapping --- when only part of the second has been --- read. It enables cancelling the mapping by typing --- . --- *cpo-l* --- l Backslash in a [] range in a search pattern is taken --- literally, only "\]", "\^", "\-" and "\\" are special. --- See `/[]` --- 'l' included: "/[ \t]" finds , '\' and 't' --- 'l' excluded: "/[ \t]" finds and --- *cpo-L* --- L When the 'list' option is set, 'wrapmargin', --- 'textwidth', 'softtabstop' and Virtual Replace mode --- (see `gR`) count a as two characters, instead of --- the normal behavior of a . --- *cpo-m* --- m When included, a showmatch will always wait half a --- second. When not included, a showmatch will wait half --- a second or until a character is typed. `'showmatch'` --- *cpo-M* --- M When excluded, "%" matching will take backslashes into --- account. Thus in "( \( )" and "\( ( \)" the outer --- parenthesis match. When included "%" ignores --- backslashes, which is Vi compatible. --- *cpo-n* --- n When included, the column used for 'number' and --- 'relativenumber' will also be used for text of wrapped --- lines. --- *cpo-o* --- o Line offset to search command is not remembered for --- next search. --- *cpo-O* --- O Don't complain if a file is being overwritten, even --- when it didn't exist when editing it. This is a --- protection against a file unexpectedly created by --- someone else. Vi didn't complain about this. --- *cpo-P* --- P When included, a ":write" command that appends to a --- file will set the file name for the current buffer, if --- the current buffer doesn't have a file name yet and --- the 'F' flag is also included `cpo-F`. --- *cpo-q* --- q When joining multiple lines leave the cursor at the --- position where it would be when joining two lines. --- *cpo-r* --- r Redo ("." command) uses "/" to repeat a search --- command, instead of the actually used search string. --- *cpo-R* --- R Remove marks from filtered lines. Without this flag --- marks are kept like `:keepmarks` was used. --- *cpo-s* --- s Set buffer options when entering the buffer for the --- first time. This is like it is in Vim version 3.0. --- And it is the default. If not present the options are --- set when the buffer is created. --- *cpo-S* --- S Set buffer options always when entering a buffer --- (except 'readonly', 'fileformat', 'filetype' and --- 'syntax'). This is the (most) Vi compatible setting. --- The options are set to the values in the current --- buffer. When you change an option and go to another --- buffer, the value is copied. Effectively makes the --- buffer options global to all buffers. --- --- 's' 'S' copy buffer options --- no no when buffer created --- yes no when buffer first entered (default) --- X yes each time when buffer entered (vi comp.) --- *cpo-t* --- t Search pattern for the tag command is remembered for --- "n" command. Otherwise Vim only puts the pattern in --- the history for search pattern, but doesn't change the --- last used search pattern. --- *cpo-u* --- u Undo is Vi compatible. See `undo-two-ways`. --- *cpo-v* --- v Backspaced characters remain visible on the screen in --- Insert mode. Without this flag the characters are --- erased from the screen right away. With this flag the --- screen newly typed text overwrites backspaced --- characters. --- *cpo-W* --- W Don't overwrite a readonly file. When omitted, ":w!" --- overwrites a readonly file, if possible. --- *cpo-x* --- x on the command-line executes the command-line. --- The default in Vim is to abandon the command-line, --- because normally aborts a command. `c_` --- *cpo-X* --- X When using a count with "R" the replaced text is --- deleted only once. Also when repeating "R" with "." --- and a count. --- *cpo-y* --- y A yank command can be redone with ".". Think twice if --- you really want to use this, it may break some --- plugins, since most people expect "." to only repeat a --- change. --- *cpo-Z* --- Z When using "w!" while the 'readonly' option is set, --- don't reset 'readonly'. --- *cpo-!* --- ! When redoing a filter command, use the last used --- external command, whatever it was. Otherwise the last --- used -filter- command is used. --- *cpo-$* --- $ When making a change to one line, don't redisplay the --- line, but put a '$' at the end of the changed text. --- The changed text will be overwritten when you type the --- new text. The line is redisplayed if you type any --- command that moves the cursor from the insertion --- point. --- *cpo-%* --- % Vi-compatible matching is done for the "%" command. --- Does not recognize "#if", "#endif", etc. --- Does not recognize "/*" and "*/". --- Parens inside single and double quotes are also --- counted, causing a string that contains a paren to --- disturb the matching. For example, in a line like --- "if (strcmp("foo(", s))" the first paren does not --- match the last one. When this flag is not included, --- parens inside single and double quotes are treated --- specially. When matching a paren outside of quotes, --- everything inside quotes is ignored. When matching a --- paren inside quotes, it will find the matching one (if --- there is one). This works very well for C programs. --- This flag is also used for other features, such as --- C-indenting. --- *cpo-+* --- + When included, a ":write file" command will reset the --- 'modified' flag of the buffer, even though the buffer --- itself may still be different from its file. --- *cpo->* --- > When appending to a register, put a line break before --- the appended text. --- *cpo-;* --- ; When using `,` or `;` to repeat the last `t` search --- and the cursor is right in front of the searched --- character, the cursor won't move. When not included, --- the cursor would skip over it and jump to the --- following occurrence. --- *cpo-_* --- _ When using `cw` on a word, do not include the --- whitespace following the word in the motion. --- --- @type string vim.o.cpoptions = "aABceFs_" vim.o.cpo = vim.o.cpoptions vim.go.cpoptions = vim.o.cpoptions vim.go.cpo = vim.go.cpoptions --- When this option is set, as the cursor in the current --- window moves other cursorbound windows (windows that also have --- this option set) move their cursors to the corresponding line and --- column. This option is useful for viewing the --- differences between two versions of a file (see 'diff'); in diff mode, --- inserted and deleted lines (though not characters within a line) are --- taken into account. --- --- @type boolean vim.o.cursorbind = false vim.o.crb = vim.o.cursorbind vim.wo.cursorbind = vim.o.cursorbind vim.wo.crb = vim.wo.cursorbind --- Highlight the screen column of the cursor with CursorColumn --- `hl-CursorColumn`. Useful to align text. Will make screen redrawing --- slower. --- If you only want the highlighting in the current window you can use --- these autocommands: --- --- ```vim --- au WinLeave * set nocursorline nocursorcolumn --- au WinEnter * set cursorline cursorcolumn --- ``` --- --- --- @type boolean vim.o.cursorcolumn = false vim.o.cuc = vim.o.cursorcolumn vim.wo.cursorcolumn = vim.o.cursorcolumn vim.wo.cuc = vim.wo.cursorcolumn --- Highlight the text line of the cursor with CursorLine `hl-CursorLine`. --- Useful to easily spot the cursor. Will make screen redrawing slower. --- When Visual mode is active the highlighting isn't used to make it --- easier to see the selected text. --- --- @type boolean vim.o.cursorline = false vim.o.cul = vim.o.cursorline vim.wo.cursorline = vim.o.cursorline vim.wo.cul = vim.wo.cursorline --- Comma-separated list of settings for how 'cursorline' is displayed. --- Valid values: --- "line" Highlight the text line of the cursor with --- CursorLine `hl-CursorLine`. --- "screenline" Highlight only the screen line of the cursor with --- CursorLine `hl-CursorLine`. --- "number" Highlight the line number of the cursor with --- CursorLineNr `hl-CursorLineNr`. --- --- Special value: --- "both" Alias for the values "line,number". --- --- "line" and "screenline" cannot be used together. --- --- @type string vim.o.cursorlineopt = "both" vim.o.culopt = vim.o.cursorlineopt vim.wo.cursorlineopt = vim.o.cursorlineopt vim.wo.culopt = vim.wo.cursorlineopt --- These values can be used: --- msg Error messages that would otherwise be omitted will be given --- anyway. --- throw Error messages that would otherwise be omitted will be given --- anyway and also throw an exception and set `v:errmsg`. --- beep A message will be given when otherwise only a beep would be --- produced. --- The values can be combined, separated by a comma. --- "msg" and "throw" are useful for debugging 'foldexpr', 'formatexpr' or --- 'indentexpr'. --- --- @type string vim.o.debug = "" vim.go.debug = vim.o.debug --- Pattern to be used to find a macro definition. It is a search --- pattern, just like for the "/" command. This option is used for the --- commands like "[i" and "[d" `include-search`. The 'isident' option is --- used to recognize the defined name after the match: --- ``` --- {match with 'define'}{non-ID chars}{defined name}{non-ID char} --- ``` --- See `option-backslash` about inserting backslashes to include a space --- or backslash. --- For C++ this value would be useful, to include const type declarations: --- ``` --- ^\(#\s*define\|[a-z]*\s*const\s*[a-z]*\) --- ``` --- You can also use "\ze" just before the name and continue the pattern --- to check what is following. E.g. for Javascript, if a function is --- defined with `func_name = function(args)`: --- ``` --- ^\s*\ze\i\+\s*=\s*function( --- ``` --- If the function is defined with `func_name : function() {...`: --- ``` --- ^\s*\ze\i\+\s*[:]\s*(*function\s*( --- ``` --- When using the ":set" command, you need to double the backslashes! --- To avoid that use `:let` with a single quote string: --- --- ```vim --- let &l:define = '^\s*\ze\k\+\s*=\s*function(' --- ``` --- --- --- @type string vim.o.define = "" vim.o.def = vim.o.define vim.bo.define = vim.o.define vim.bo.def = vim.bo.define vim.go.define = vim.o.define vim.go.def = vim.go.define --- If editing Unicode and this option is set, backspace and Normal mode --- "x" delete each combining character on its own. When it is off (the --- default) the character along with its combining characters are --- deleted. --- Note: When 'delcombine' is set "xx" may work differently from "2x"! --- --- This is useful for Arabic, Hebrew and many other languages where one --- may have combining characters overtop of base characters, and want --- to remove only the combining ones. --- --- @type boolean vim.o.delcombine = false vim.o.deco = vim.o.delcombine vim.go.delcombine = vim.o.delcombine vim.go.deco = vim.go.delcombine --- List of file names, separated by commas, that are used to lookup words --- for keyword completion commands `i_CTRL-X_CTRL-K`. Each file should --- contain a list of words. This can be one word per line, or several --- words per line, separated by non-keyword characters (white space is --- preferred). Maximum line length is 510 bytes. --- --- When this option is empty or an entry "spell" is present, and spell --- checking is enabled, words in the word lists for the currently active --- 'spelllang' are used. See `spell`. --- --- To include a comma in a file name precede it with a backslash. Spaces --- after a comma are ignored, otherwise spaces are included in the file --- name. See `option-backslash` about using backslashes. --- This has nothing to do with the `Dictionary` variable type. --- Where to find a list of words? --- - BSD/macOS include the "/usr/share/dict/words" file. --- - Try "apt install spell" to get the "/usr/share/dict/words" file on --- apt-managed systems (Debian/Ubuntu). --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- directories from the list. This avoids problems when a future version --- uses another default. --- Backticks cannot be used in this option for security reasons. --- --- @type string vim.o.dictionary = "" vim.o.dict = vim.o.dictionary vim.bo.dictionary = vim.o.dictionary vim.bo.dict = vim.bo.dictionary vim.go.dictionary = vim.o.dictionary vim.go.dict = vim.go.dictionary --- Join the current window in the group of windows that shows differences --- between files. See `diff-mode`. --- --- @type boolean vim.o.diff = false vim.wo.diff = vim.o.diff --- Expression which is evaluated to obtain a diff file (either ed-style --- or unified-style) from two versions of a file. See `diff-diffexpr`. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.diffexpr = "" vim.o.dex = vim.o.diffexpr vim.go.diffexpr = vim.o.diffexpr vim.go.dex = vim.go.diffexpr --- Option settings for diff mode. It can consist of the following items. --- All are optional. Items must be separated by a comma. --- --- filler Show filler lines, to keep the text --- synchronized with a window that has inserted --- lines at the same position. Mostly useful --- when windows are side-by-side and 'scrollbind' --- is set. --- --- context:{n} Use a context of {n} lines between a change --- and a fold that contains unchanged lines. --- When omitted a context of six lines is used. --- When using zero the context is actually one, --- since folds require a line in between, also --- for a deleted line. Set it to a very large --- value (999999) to disable folding completely. --- See `fold-diff`. --- --- iblank Ignore changes where lines are all blank. Adds --- the "-B" flag to the "diff" command if --- 'diffexpr' is empty. Check the documentation --- of the "diff" command for what this does --- exactly. --- NOTE: the diff windows will get out of sync, --- because no differences between blank lines are --- taken into account. --- --- icase Ignore changes in case of text. "a" and "A" --- are considered the same. Adds the "-i" flag --- to the "diff" command if 'diffexpr' is empty. --- --- iwhite Ignore changes in amount of white space. Adds --- the "-b" flag to the "diff" command if --- 'diffexpr' is empty. Check the documentation --- of the "diff" command for what this does --- exactly. It should ignore adding trailing --- white space, but not leading white space. --- --- iwhiteall Ignore all white space changes. Adds --- the "-w" flag to the "diff" command if --- 'diffexpr' is empty. Check the documentation --- of the "diff" command for what this does --- exactly. --- --- iwhiteeol Ignore white space changes at end of line. --- Adds the "-Z" flag to the "diff" command if --- 'diffexpr' is empty. Check the documentation --- of the "diff" command for what this does --- exactly. --- --- horizontal Start diff mode with horizontal splits (unless --- explicitly specified otherwise). --- --- vertical Start diff mode with vertical splits (unless --- explicitly specified otherwise). --- --- closeoff When a window is closed where 'diff' is set --- and there is only one window remaining in the --- same tab page with 'diff' set, execute --- `:diffoff` in that window. This undoes a --- `:diffsplit` command. --- --- hiddenoff Do not use diff mode for a buffer when it --- becomes hidden. --- --- foldcolumn:{n} Set the 'foldcolumn' option to {n} when --- starting diff mode. Without this 2 is used. --- --- followwrap Follow the 'wrap' option and leave as it is. --- --- internal Use the internal diff library. This is --- ignored when 'diffexpr' is set. *E960* --- When running out of memory when writing a --- buffer this item will be ignored for diffs --- involving that buffer. Set the 'verbose' --- option to see when this happens. --- --- indent-heuristic --- Use the indent heuristic for the internal --- diff library. --- --- linematch:{n} Enable a second stage diff on each generated --- hunk in order to align lines. When the total --- number of lines in a hunk exceeds {n}, the --- second stage diff will not be performed as --- very large hunks can cause noticeable lag. A --- recommended setting is "linematch:60", as this --- will enable alignment for a 2 buffer diff with --- hunks of up to 30 lines each, or a 3 buffer --- diff with hunks of up to 20 lines each. --- --- algorithm:{text} Use the specified diff algorithm with the --- internal diff engine. Currently supported --- algorithms are: --- myers the default algorithm --- minimal spend extra time to generate the --- smallest possible diff --- patience patience diff algorithm --- histogram histogram diff algorithm --- --- Examples: --- --- ```vim --- set diffopt=internal,filler,context:4 --- set diffopt= --- set diffopt=internal,filler,foldcolumn:3 --- set diffopt-=internal " do NOT use the internal diff parser --- ``` --- --- --- @type string vim.o.diffopt = "internal,filler,closeoff" vim.o.dip = vim.o.diffopt vim.go.diffopt = vim.o.diffopt vim.go.dip = vim.go.diffopt --- Enable the entering of digraphs in Insert mode with {char1} --- {char2}. See `digraphs`. --- --- @type boolean vim.o.digraph = false vim.o.dg = vim.o.digraph vim.go.digraph = vim.o.digraph vim.go.dg = vim.go.digraph --- List of directory names for the swap file, separated with commas. --- --- Possible items: --- - The swap file will be created in the first directory where this is --- possible. If it is not possible in any directory, but last --- directory listed in the option does not exist, it is created. --- - Empty means that no swap file will be used (recovery is --- impossible!) and no `E303` error will be given. --- - A directory "." means to put the swap file in the same directory as --- the edited file. On Unix, a dot is prepended to the file name, so --- it doesn't show in a directory listing. On MS-Windows the "hidden" --- attribute is set and a dot prepended if possible. --- - A directory starting with "./" (or ".\" for MS-Windows) means to put --- the swap file relative to where the edited file is. The leading "." --- is replaced with the path name of the edited file. --- - For Unix and Win32, if a directory ends in two path separators "//", --- the swap file name will be built from the complete path to the file --- with all path separators replaced by percent '%' signs (including --- the colon following the drive letter on Win32). This will ensure --- file name uniqueness in the preserve directory. --- On Win32, it is also possible to end with "\\". However, When a --- separating comma is following, you must use "//", since "\\" will --- include the comma in the file name. Therefore it is recommended to --- use '//', instead of '\\'. --- - Spaces after the comma are ignored, other spaces are considered part --- of the directory name. To have a space at the start of a directory --- name, precede it with a backslash. --- - To include a comma in a directory name precede it with a backslash. --- - A directory name may end in an ':' or '/'. --- - Environment variables are expanded `:set_env`. --- - Careful with '\' characters, type one before a space, type two to --- get one in the option (see `option-backslash`), for example: --- --- ```vim --- set dir=c:\\tmp,\ dir\\,with\\,commas,\\\ dir\ with\ spaces --- ``` --- --- Editing the same file twice will result in a warning. Using "/tmp" on --- is discouraged: if the system crashes you lose the swap file. And --- others on the computer may be able to see the files. --- Use `:set+=` and `:set-=` when adding or removing directories from the --- list, this avoids problems if the Nvim default is changed. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.directory = "$XDG_STATE_HOME/nvim/swap//" vim.o.dir = vim.o.directory vim.go.directory = vim.o.directory vim.go.dir = vim.go.directory --- Change the way text is displayed. This is a comma-separated list of --- flags: --- lastline When included, as much as possible of the last line --- in a window will be displayed. "@@@" is put in the --- last columns of the last screen line to indicate the --- rest of the line is not displayed. --- truncate Like "lastline", but "@@@" is displayed in the first --- column of the last screen line. Overrules "lastline". --- uhex Show unprintable characters hexadecimal as --- instead of using ^C and ~C. --- msgsep Obsolete flag. Allowed but takes no effect. `msgsep` --- --- When neither "lastline" nor "truncate" is included, a last line that --- doesn't fit is replaced with "@" lines. --- --- The "@" character can be changed by setting the "lastline" item in --- 'fillchars'. The character is highlighted with `hl-NonText`. --- --- @type string vim.o.display = "lastline" vim.o.dy = vim.o.display vim.go.display = vim.o.display vim.go.dy = vim.go.display --- Tells when the 'equalalways' option applies: --- ver vertically, width of windows is not affected --- hor horizontally, height of windows is not affected --- both width and height of windows is affected --- --- @type string vim.o.eadirection = "both" vim.o.ead = vim.o.eadirection vim.go.eadirection = vim.o.eadirection vim.go.ead = vim.go.eadirection --- When on all Unicode emoji characters are considered to be full width. --- This excludes "text emoji" characters, which are normally displayed as --- single width. However, such "text emoji" are treated as full-width --- emoji if they are followed by the U+FE0F variant selector. --- --- Unfortunately there is no good specification for this and it has been --- determined on trial-and-error basis. Use the `setcellwidths()` --- function to change the behavior. --- --- @type boolean vim.o.emoji = true vim.o.emo = vim.o.emoji vim.go.emoji = vim.o.emoji vim.go.emo = vim.go.emoji --- String-encoding used internally and for `RPC` communication. --- Always UTF-8. --- --- See 'fileencoding' to control file-content encoding. --- --- @type string vim.o.encoding = "utf-8" vim.o.enc = vim.o.encoding vim.go.encoding = vim.o.encoding vim.go.enc = vim.go.encoding --- Indicates that a CTRL-Z character was found at the end of the file --- when reading it. Normally only happens when 'fileformat' is "dos". --- When writing a file and this option is off and the 'binary' option --- is on, or 'fixeol' option is off, no CTRL-Z will be written at the --- end of the file. --- See `eol-and-eof` for example settings. --- --- @type boolean vim.o.endoffile = false vim.o.eof = vim.o.endoffile vim.bo.endoffile = vim.o.endoffile vim.bo.eof = vim.bo.endoffile --- When writing a file and this option is off and the 'binary' option --- is on, or 'fixeol' option is off, no will be written for the --- last line in the file. This option is automatically set or reset when --- starting to edit a new file, depending on whether file has an --- for the last line in the file. Normally you don't have to set or --- reset this option. --- When 'binary' is off and 'fixeol' is on the value is not used when --- writing the file. When 'binary' is on or 'fixeol' is off it is used --- to remember the presence of a for the last line in the file, so --- that when you write the file the situation from the original file can --- be kept. But you can change it if you want to. --- See `eol-and-eof` for example settings. --- --- @type boolean vim.o.endofline = true vim.o.eol = vim.o.endofline vim.bo.endofline = vim.o.endofline vim.bo.eol = vim.bo.endofline --- When on, all the windows are automatically made the same size after --- splitting or closing a window. This also happens the moment the --- option is switched on. When off, splitting a window will reduce the --- size of the current window and leave the other windows the same. When --- closing a window the extra lines are given to the window next to it --- (depending on 'splitbelow' and 'splitright'). --- When mixing vertically and horizontally split windows, a minimal size --- is computed and some windows may be larger if there is room. The --- 'eadirection' option tells in which direction the size is affected. --- Changing the height and width of a window can be avoided by setting --- 'winfixheight' and 'winfixwidth', respectively. --- If a window size is specified when creating a new window sizes are --- currently not equalized (it's complicated, but may be implemented in --- the future). --- --- @type boolean vim.o.equalalways = true vim.o.ea = vim.o.equalalways vim.go.equalalways = vim.o.equalalways vim.go.ea = vim.go.equalalways --- External program to use for "=" command. When this option is empty --- the internal formatting functions are used; either 'lisp', 'cindent' --- or 'indentexpr'. --- Environment variables are expanded `:set_env`. See `option-backslash` --- about including spaces and backslashes. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.equalprg = "" vim.o.ep = vim.o.equalprg vim.bo.equalprg = vim.o.equalprg vim.bo.ep = vim.bo.equalprg vim.go.equalprg = vim.o.equalprg vim.go.ep = vim.go.equalprg --- Ring the bell (beep or screen flash) for error messages. This only --- makes a difference for error messages, the bell will be used always --- for a lot of errors without a message (e.g., hitting in Normal --- mode). See 'visualbell' to make the bell behave like a screen flash --- or do nothing. See 'belloff' to finetune when to ring the bell. --- --- @type boolean vim.o.errorbells = false vim.o.eb = vim.o.errorbells vim.go.errorbells = vim.o.errorbells vim.go.eb = vim.go.errorbells --- Name of the errorfile for the QuickFix mode (see `:cf`). --- When the "-q" command-line argument is used, 'errorfile' is set to the --- following argument. See `-q`. --- NOT used for the ":make" command. See 'makeef' for that. --- Environment variables are expanded `:set_env`. --- See `option-backslash` about including spaces and backslashes. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.errorfile = "errors.err" vim.o.ef = vim.o.errorfile vim.go.errorfile = vim.o.errorfile vim.go.ef = vim.go.errorfile --- Scanf-like description of the format for the lines in the error file --- (see `errorformat`). --- --- @type string vim.o.errorformat = "%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%-Gg%\\?make[%*\\d]: *** [%f:%l:%m,%-Gg%\\?make: *** [%f:%l:%m,%-G%f:%l: (Each undeclared identifier is reported only once,%-G%f:%l: for each function it appears in.),%-GIn file included from %f:%l:%c:,%-GIn file included from %f:%l:%c\\,,%-GIn file included from %f:%l:%c,%-GIn file included from %f:%l,%-G%*[ ]from %f:%l:%c,%-G%*[ ]from %f:%l:,%-G%*[ ]from %f:%l\\,,%-G%*[ ]from %f:%l,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory %*[`']%f',%X%*\\a[%*\\d]: Leaving directory %*[`']%f',%D%*\\a: Entering directory %*[`']%f',%X%*\\a: Leaving directory %*[`']%f',%DMaking %*\\a in %f,%f|%l| %m" vim.o.efm = vim.o.errorformat vim.bo.errorformat = vim.o.errorformat vim.bo.efm = vim.bo.errorformat vim.go.errorformat = vim.o.errorformat vim.go.efm = vim.go.errorformat --- A list of autocommand event names, which are to be ignored. --- When set to "all" or when "all" is one of the items, all autocommand --- events are ignored, autocommands will not be executed. --- Otherwise this is a comma-separated list of event names. Example: --- --- ```vim --- set ei=WinEnter,WinLeave --- ``` --- --- --- @type string vim.o.eventignore = "" vim.o.ei = vim.o.eventignore vim.go.eventignore = vim.o.eventignore vim.go.ei = vim.go.eventignore --- In Insert mode: Use the appropriate number of spaces to insert a --- . Spaces are used in indents with the '>' and '<' commands and --- when 'autoindent' is on. To insert a real tab when 'expandtab' is --- on, use CTRL-V. See also `:retab` and `ins-expandtab`. --- --- @type boolean vim.o.expandtab = false vim.o.et = vim.o.expandtab vim.bo.expandtab = vim.o.expandtab vim.bo.et = vim.bo.expandtab --- Automatically execute .nvim.lua, .nvimrc, and .exrc files in the --- current directory, if the file is in the `trust` list. Use `:trust` to --- manage trusted files. See also `vim.secure.read()`. --- --- Compare 'exrc' to `editorconfig`: --- - 'exrc' can execute any code; editorconfig only specifies settings. --- - 'exrc' is Nvim-specific; editorconfig works in other editors. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type boolean vim.o.exrc = false vim.o.ex = vim.o.exrc vim.go.exrc = vim.o.exrc vim.go.ex = vim.go.exrc --- File-content encoding for the current buffer. Conversion is done with --- iconv() or as specified with 'charconvert'. --- --- When 'fileencoding' is not UTF-8, conversion will be done when --- writing the file. For reading see below. --- When 'fileencoding' is empty, the file will be saved with UTF-8 --- encoding (no conversion when reading or writing a file). --- --- WARNING: Conversion to a non-Unicode encoding can cause loss of --- information! --- --- See `encoding-names` for the possible values. Additionally, values may be --- specified that can be handled by the converter, see --- `mbyte-conversion`. --- --- When reading a file 'fileencoding' will be set from 'fileencodings'. --- To read a file in a certain encoding it won't work by setting --- 'fileencoding', use the `++enc` argument. One exception: when --- 'fileencodings' is empty the value of 'fileencoding' is used. --- For a new file the global value of 'fileencoding' is used. --- --- Prepending "8bit-" and "2byte-" has no meaning here, they are ignored. --- When the option is set, the value is converted to lowercase. Thus --- you can set it with uppercase values too. '_' characters are --- replaced with '-'. If a name is recognized from the list at --- `encoding-names`, it is replaced by the standard name. For example --- "ISO8859-2" becomes "iso-8859-2". --- --- When this option is set, after starting to edit a file, the 'modified' --- option is set, because the file would be different when written. --- --- Keep in mind that changing 'fenc' from a modeline happens --- AFTER the text has been read, thus it applies to when the file will be --- written. If you do set 'fenc' in a modeline, you might want to set --- 'nomodified' to avoid not being able to ":q". --- --- This option cannot be changed when 'modifiable' is off. --- --- @type string vim.o.fileencoding = "" vim.o.fenc = vim.o.fileencoding vim.bo.fileencoding = vim.o.fileencoding vim.bo.fenc = vim.bo.fileencoding --- This is a list of character encodings considered when starting to edit --- an existing file. When a file is read, Vim tries to use the first --- mentioned character encoding. If an error is detected, the next one --- in the list is tried. When an encoding is found that works, --- 'fileencoding' is set to it. If all fail, 'fileencoding' is set to --- an empty string, which means that UTF-8 is used. --- WARNING: Conversion can cause loss of information! You can use --- the `++bad` argument to specify what is done with characters --- that can't be converted. --- For an empty file or a file with only ASCII characters most encodings --- will work and the first entry of 'fileencodings' will be used (except --- "ucs-bom", which requires the BOM to be present). If you prefer --- another encoding use an BufReadPost autocommand event to test if your --- preferred encoding is to be used. Example: --- --- ```vim --- au BufReadPost * if search('\S', 'w') == 0 | --- \ set fenc=iso-2022-jp | endif --- ``` --- This sets 'fileencoding' to "iso-2022-jp" if the file does not contain --- non-blank characters. --- When the `++enc` argument is used then the value of 'fileencodings' is --- not used. --- Note that 'fileencodings' is not used for a new file, the global value --- of 'fileencoding' is used instead. You can set it with: --- --- ```vim --- setglobal fenc=iso-8859-2 --- ``` --- This means that a non-existing file may get a different encoding than --- an empty file. --- The special value "ucs-bom" can be used to check for a Unicode BOM --- (Byte Order Mark) at the start of the file. It must not be preceded --- by "utf-8" or another Unicode encoding for this to work properly. --- An entry for an 8-bit encoding (e.g., "latin1") should be the last, --- because Vim cannot detect an error, thus the encoding is always --- accepted. --- The special value "default" can be used for the encoding from the --- environment. It is useful when your environment uses a non-latin1 --- encoding, such as Russian. --- When a file contains an illegal UTF-8 byte sequence it won't be --- recognized as "utf-8". You can use the `8g8` command to find the --- illegal byte sequence. --- WRONG VALUES: WHAT'S WRONG: --- latin1,utf-8 "latin1" will always be used --- utf-8,ucs-bom,latin1 BOM won't be recognized in an utf-8 --- file --- cp1250,latin1 "cp1250" will always be used --- If 'fileencodings' is empty, 'fileencoding' is not modified. --- See 'fileencoding' for the possible values. --- Setting this option does not have an effect until the next time a file --- is read. --- --- @type string vim.o.fileencodings = "ucs-bom,utf-8,default,latin1" vim.o.fencs = vim.o.fileencodings vim.go.fileencodings = vim.o.fileencodings vim.go.fencs = vim.go.fileencodings --- This gives the of the current buffer, which is used for --- reading/writing the buffer from/to a file: --- dos --- unix --- mac --- When "dos" is used, CTRL-Z at the end of a file is ignored. --- See `file-formats` and `file-read`. --- For the character encoding of the file see 'fileencoding'. --- When 'binary' is set, the value of 'fileformat' is ignored, file I/O --- works like it was set to "unix". --- This option is set automatically when starting to edit a file and --- 'fileformats' is not empty and 'binary' is off. --- When this option is set, after starting to edit a file, the 'modified' --- option is set, because the file would be different when written. --- This option cannot be changed when 'modifiable' is off. --- --- @type string vim.o.fileformat = "unix" vim.o.ff = vim.o.fileformat vim.bo.fileformat = vim.o.fileformat vim.bo.ff = vim.bo.fileformat --- This gives the end-of-line () formats that will be tried when --- starting to edit a new buffer and when reading a file into an existing --- buffer: --- - When empty, the format defined with 'fileformat' will be used --- always. It is not set automatically. --- - When set to one name, that format will be used whenever a new buffer --- is opened. 'fileformat' is set accordingly for that buffer. The --- 'fileformats' name will be used when a file is read into an existing --- buffer, no matter what 'fileformat' for that buffer is set to. --- - When more than one name is present, separated by commas, automatic --- detection will be done when reading a file. When starting to --- edit a file, a check is done for the : --- 1. If all lines end in , and 'fileformats' includes "dos", --- 'fileformat' is set to "dos". --- 2. If a is found and 'fileformats' includes "unix", 'fileformat' --- is set to "unix". Note that when a is found without a --- preceding , "unix" is preferred over "dos". --- 3. If 'fileformat' has not yet been set, and if a is found, and --- if 'fileformats' includes "mac", 'fileformat' is set to "mac". --- This means that "mac" is only chosen when: --- "unix" is not present or no is found in the file, and --- "dos" is not present or no is found in the file. --- Except: if "unix" was chosen, but there is a before --- the first , and there appear to be more s than s in --- the first few lines, "mac" is used. --- 4. If 'fileformat' is still not set, the first name from --- 'fileformats' is used. --- When reading a file into an existing buffer, the same is done, but --- this happens like 'fileformat' has been set appropriately for that --- file only, the option is not changed. --- When 'binary' is set, the value of 'fileformats' is not used. --- --- When Vim starts up with an empty buffer the first item is used. You --- can overrule this by setting 'fileformat' in your .vimrc. --- --- For systems with a Dos-like (), when reading files that --- are ":source"ed and for vimrc files, automatic detection may be --- done: --- - When 'fileformats' is empty, there is no automatic detection. Dos --- format will be used. --- - When 'fileformats' is set to one or more names, automatic detection --- is done. This is based on the first in the file: If there is a --- in front of it, Dos format is used, otherwise Unix format is --- used. --- Also see `file-formats`. --- --- @type string vim.o.fileformats = "unix,dos" vim.o.ffs = vim.o.fileformats vim.go.fileformats = vim.o.fileformats vim.go.ffs = vim.go.fileformats --- When set case is ignored when using file names and directories. --- See 'wildignorecase' for only ignoring case when doing completion. --- --- @type boolean vim.o.fileignorecase = false vim.o.fic = vim.o.fileignorecase vim.go.fileignorecase = vim.o.fileignorecase vim.go.fic = vim.go.fileignorecase --- When this option is set, the FileType autocommand event is triggered. --- All autocommands that match with the value of this option will be --- executed. Thus the value of 'filetype' is used in place of the file --- name. --- Otherwise this option does not always reflect the current file type. --- This option is normally set when the file type is detected. To enable --- this use the ":filetype on" command. `:filetype` --- Setting this option to a different value is most useful in a modeline, --- for a file for which the file type is not automatically recognized. --- Example, for in an IDL file: >c --- /* vim: set filetype=idl : */ --- ``` --- `FileType` `filetypes` --- When a dot appears in the value then this separates two filetype --- names, it should therefore not be used for a filetype. Example: >c --- /* vim: set filetype=c.doxygen : */ --- ``` --- This will use the "c" filetype first, then the "doxygen" filetype. --- This works both for filetype plugins and for syntax files. More than --- one dot may appear. --- This option is not copied to another buffer, independent of the 's' or --- 'S' flag in 'cpoptions'. --- Only alphanumeric characters, '-' and '_' can be used. --- --- @type string vim.o.filetype = "" vim.o.ft = vim.o.filetype vim.bo.filetype = vim.o.filetype vim.bo.ft = vim.bo.filetype --- Characters to fill the statuslines, vertical separators and special --- lines in the window. --- It is a comma-separated list of items. Each item has a name, a colon --- and the value of that item: `E1511` --- --- item default Used for ~ --- stl ' ' statusline of the current window --- stlnc ' ' statusline of the non-current windows --- wbr ' ' window bar --- horiz '─' or '-' horizontal separators `:split` --- horizup '┴' or '-' upwards facing horizontal separator --- horizdown '┬' or '-' downwards facing horizontal separator --- vert '│' or '|' vertical separators `:vsplit` --- vertleft '┤' or '|' left facing vertical separator --- vertright '├' or '|' right facing vertical separator --- verthoriz '┼' or '+' overlapping vertical and horizontal --- separator --- fold '·' or '-' filling 'foldtext' --- foldopen '-' mark the beginning of a fold --- foldclose '+' show a closed fold --- foldsep '│' or '|' open fold middle marker --- diff '-' deleted lines of the 'diff' option --- msgsep ' ' message separator 'display' --- eob '~' empty lines at the end of a buffer --- lastline '@' 'display' contains lastline/truncate --- --- Any one that is omitted will fall back to the default. --- --- Note that "horiz", "horizup", "horizdown", "vertleft", "vertright" and --- "verthoriz" are only used when 'laststatus' is 3, since only vertical --- window separators are used otherwise. --- --- If 'ambiwidth' is "double" then "horiz", "horizup", "horizdown", --- "vert", "vertleft", "vertright", "verthoriz", "foldsep" and "fold" --- default to single-byte alternatives. --- --- Example: --- --- ```vim --- set fillchars=stl:\ ,stlnc:\ ,vert:│,fold:·,diff:- --- ``` --- --- For the "stl", "stlnc", "foldopen", "foldclose" and "foldsep" items --- single-byte and multibyte characters are supported. But double-width --- characters are not supported. `E1512` --- --- The highlighting used for these items: --- item highlight group ~ --- stl StatusLine `hl-StatusLine` --- stlnc StatusLineNC `hl-StatusLineNC` --- wbr WinBar `hl-WinBar` or `hl-WinBarNC` --- horiz WinSeparator `hl-WinSeparator` --- horizup WinSeparator `hl-WinSeparator` --- horizdown WinSeparator `hl-WinSeparator` --- vert WinSeparator `hl-WinSeparator` --- vertleft WinSeparator `hl-WinSeparator` --- vertright WinSeparator `hl-WinSeparator` --- verthoriz WinSeparator `hl-WinSeparator` --- fold Folded `hl-Folded` --- diff DiffDelete `hl-DiffDelete` --- eob EndOfBuffer `hl-EndOfBuffer` --- lastline NonText `hl-NonText` --- --- @type string vim.o.fillchars = "" vim.o.fcs = vim.o.fillchars vim.wo.fillchars = vim.o.fillchars vim.wo.fcs = vim.wo.fillchars vim.go.fillchars = vim.o.fillchars vim.go.fcs = vim.go.fillchars --- Function that is called to obtain the filename(s) for the `:find` --- command. When this option is empty, the internal `file-searching` --- mechanism is used. --- --- The value can be the name of a function, a `lambda` or a `Funcref`. --- See `option-value-function` for more information. --- --- The function is called with two arguments. The first argument is a --- `String` and is the `:find` command argument. The second argument is --- a `Boolean` and is set to `v:true` when the function is called to get --- a List of command-line completion matches for the `:find` command. --- The function should return a List of strings. --- --- The function is called only once per `:find` command invocation. --- The function can process all the directories specified in 'path'. --- --- If a match is found, the function should return a `List` containing --- one or more file names. If a match is not found, the function --- should return an empty List. --- --- If any errors are encountered during the function invocation, an --- empty List is used as the return value. --- --- It is not allowed to change text or jump to another window while --- executing the 'findfunc' `textlock`. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- Examples: --- --- ```vim --- " Use glob() --- func FindFuncGlob(cmdarg, cmdcomplete) --- let pat = a:cmdcomplete ? $'{a:cmdarg}*' : a:cmdarg --- return glob(pat, v:false, v:true) --- endfunc --- set findfunc=FindFuncGlob --- --- " Use the 'git ls-files' output --- func FindGitFiles(cmdarg, cmdcomplete) --- let fnames = systemlist('git ls-files') --- return fnames->filter('v:val =~? a:cmdarg') --- endfunc --- set findfunc=FindGitFiles --- ``` --- --- --- @type string vim.o.findfunc = "" vim.o.ffu = vim.o.findfunc vim.bo.findfunc = vim.o.findfunc vim.bo.ffu = vim.bo.findfunc vim.go.findfunc = vim.o.findfunc vim.go.ffu = vim.go.findfunc --- When writing a file and this option is on, at the end of file --- will be restored if missing. Turn this option off if you want to --- preserve the situation from the original file. --- When the 'binary' option is set the value of this option doesn't --- matter. --- See the 'endofline' option. --- See `eol-and-eof` for example settings. --- --- @type boolean vim.o.fixendofline = true vim.o.fixeol = vim.o.fixendofline vim.bo.fixendofline = vim.o.fixendofline vim.bo.fixeol = vim.bo.fixendofline --- When set to "all", a fold is closed when the cursor isn't in it and --- its level is higher than 'foldlevel'. Useful if you want folds to --- automatically close when moving out of them. --- --- @type string vim.o.foldclose = "" vim.o.fcl = vim.o.foldclose vim.go.foldclose = vim.o.foldclose vim.go.fcl = vim.go.foldclose --- When and how to draw the foldcolumn. Valid values are: --- "auto": resize to the minimum amount of folds to display. --- "auto:[1-9]": resize to accommodate multiple folds up to the --- selected level --- "0": to disable foldcolumn --- "[1-9]": to display a fixed number of columns --- See `folding`. --- --- @type string vim.o.foldcolumn = "0" vim.o.fdc = vim.o.foldcolumn vim.wo.foldcolumn = vim.o.foldcolumn vim.wo.fdc = vim.wo.foldcolumn --- When off, all folds are open. This option can be used to quickly --- switch between showing all text unfolded and viewing the text with --- folds (including manually opened or closed folds). It can be toggled --- with the `zi` command. The 'foldcolumn' will remain blank when --- 'foldenable' is off. --- This option is set by commands that create a new fold or close a fold. --- See `folding`. --- --- @type boolean vim.o.foldenable = true vim.o.fen = vim.o.foldenable vim.wo.foldenable = vim.o.foldenable vim.wo.fen = vim.wo.foldenable --- The expression used for when 'foldmethod' is "expr". It is evaluated --- for each line to obtain its fold level. The context is set to the --- script where 'foldexpr' was set, script-local items can be accessed. --- See `fold-expr` for the usage. --- --- The expression will be evaluated in the `sandbox` if set from a --- modeline, see `sandbox-option`. --- This option can't be set from a `modeline` when the 'diff' option is --- on or the 'modelineexpr' option is off. --- --- It is not allowed to change text or jump to another window while --- evaluating 'foldexpr' `textlock`. --- --- @type string vim.o.foldexpr = "0" vim.o.fde = vim.o.foldexpr vim.wo.foldexpr = vim.o.foldexpr vim.wo.fde = vim.wo.foldexpr --- Used only when 'foldmethod' is "indent". Lines starting with --- characters in 'foldignore' will get their fold level from surrounding --- lines. White space is skipped before checking for this character. --- The default "#" works well for C programs. See `fold-indent`. --- --- @type string vim.o.foldignore = "#" vim.o.fdi = vim.o.foldignore vim.wo.foldignore = vim.o.foldignore vim.wo.fdi = vim.wo.foldignore --- Sets the fold level: Folds with a higher level will be closed. --- Setting this option to zero will close all folds. Higher numbers will --- close fewer folds. --- This option is set by commands like `zm`, `zM` and `zR`. --- See `fold-foldlevel`. --- --- @type integer vim.o.foldlevel = 0 vim.o.fdl = vim.o.foldlevel vim.wo.foldlevel = vim.o.foldlevel vim.wo.fdl = vim.wo.foldlevel --- Sets 'foldlevel' when starting to edit another buffer in a window. --- Useful to always start editing with all folds closed (value zero), --- some folds closed (one) or no folds closed (99). --- This is done before reading any modeline, thus a setting in a modeline --- overrules this option. Starting to edit a file for `diff-mode` also --- ignores this option and closes all folds. --- It is also done before BufReadPre autocommands, to allow an autocmd to --- overrule the 'foldlevel' value for specific files. --- When the value is negative, it is not used. --- --- @type integer vim.o.foldlevelstart = -1 vim.o.fdls = vim.o.foldlevelstart vim.go.foldlevelstart = vim.o.foldlevelstart vim.go.fdls = vim.go.foldlevelstart --- The start and end marker used when 'foldmethod' is "marker". There --- must be one comma, which separates the start and end marker. The --- marker is a literal string (a regular expression would be too slow). --- See `fold-marker`. --- --- @type string vim.o.foldmarker = "{{{,}}}" vim.o.fmr = vim.o.foldmarker vim.wo.foldmarker = vim.o.foldmarker vim.wo.fmr = vim.wo.foldmarker --- The kind of folding used for the current window. Possible values: --- `fold-manual` manual Folds are created manually. --- `fold-indent` indent Lines with equal indent form a fold. --- `fold-expr` expr 'foldexpr' gives the fold level of a line. --- `fold-marker` marker Markers are used to specify folds. --- `fold-syntax` syntax Syntax highlighting items specify folds. --- `fold-diff` diff Fold text that is not changed. --- --- @type string vim.o.foldmethod = "manual" vim.o.fdm = vim.o.foldmethod vim.wo.foldmethod = vim.o.foldmethod vim.wo.fdm = vim.wo.foldmethod --- Sets the number of screen lines above which a fold can be displayed --- closed. Also for manually closed folds. With the default value of --- one a fold can only be closed if it takes up two or more screen lines. --- Set to zero to be able to close folds of just one screen line. --- Note that this only has an effect on what is displayed. After using --- "zc" to close a fold, which is displayed open because it's smaller --- than 'foldminlines', a following "zc" may close a containing fold. --- --- @type integer vim.o.foldminlines = 1 vim.o.fml = vim.o.foldminlines vim.wo.foldminlines = vim.o.foldminlines vim.wo.fml = vim.wo.foldminlines --- Sets the maximum nesting of folds for the "indent" and "syntax" --- methods. This avoids that too many folds will be created. Using more --- than 20 doesn't work, because the internal limit is 20. --- --- @type integer vim.o.foldnestmax = 20 vim.o.fdn = vim.o.foldnestmax vim.wo.foldnestmax = vim.o.foldnestmax vim.wo.fdn = vim.wo.foldnestmax --- Specifies for which type of commands folds will be opened, if the --- command moves the cursor into a closed fold. It is a comma-separated --- list of items. --- NOTE: When the command is part of a mapping this option is not used. --- Add the `zv` command to the mapping to get the same effect. --- (rationale: the mapping may want to control opening folds itself) --- --- item commands ~ --- all any --- block (, {, [[, [{, etc. --- hor horizontal movements: "l", "w", "fx", etc. --- insert any command in Insert mode --- jump far jumps: "G", "gg", etc. --- mark jumping to a mark: "'m", CTRL-O, etc. --- percent "%" --- quickfix ":cn", ":crew", ":make", etc. --- search search for a pattern: "/", "n", "*", "gd", etc. --- (not for a search pattern in a ":" command) --- Also for `[s` and `]s`. --- tag jumping to a tag: ":ta", CTRL-T, etc. --- undo undo or redo: "u" and CTRL-R --- When a movement command is used for an operator (e.g., "dl" or "y%") --- this option is not used. This means the operator will include the --- whole closed fold. --- Note that vertical movements are not here, because it would make it --- very difficult to move onto a closed fold. --- In insert mode the folds containing the cursor will always be open --- when text is inserted. --- To close folds you can re-apply 'foldlevel' with the `zx` command or --- set the 'foldclose' option to "all". --- --- @type string vim.o.foldopen = "block,hor,mark,percent,quickfix,search,tag,undo" vim.o.fdo = vim.o.foldopen vim.go.foldopen = vim.o.foldopen vim.go.fdo = vim.go.foldopen --- An expression which is used to specify the text displayed for a closed --- fold. The context is set to the script where 'foldexpr' was set, --- script-local items can be accessed. See `fold-foldtext` for the --- usage. --- --- The expression will be evaluated in the `sandbox` if set from a --- modeline, see `sandbox-option`. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- It is not allowed to change text or jump to another window while --- evaluating 'foldtext' `textlock`. --- --- When set to an empty string, foldtext is disabled, and the line --- is displayed normally with highlighting and no line wrapping. --- --- @type string vim.o.foldtext = "foldtext()" vim.o.fdt = vim.o.foldtext vim.wo.foldtext = vim.o.foldtext vim.wo.fdt = vim.wo.foldtext --- Expression which is evaluated to format a range of lines for the `gq` --- operator or automatic formatting (see 'formatoptions'). When this --- option is empty 'formatprg' is used. --- --- The `v:lnum` variable holds the first line to be formatted. --- The `v:count` variable holds the number of lines to be formatted. --- The `v:char` variable holds the character that is going to be --- inserted if the expression is being evaluated due to --- automatic formatting. This can be empty. Don't insert --- it yet! --- --- Example: --- --- ```vim --- set formatexpr=mylang#Format() --- ``` --- This will invoke the mylang#Format() function in the --- autoload/mylang.vim file in 'runtimepath'. `autoload` --- --- The advantage of using a function call without arguments is that it is --- faster, see `expr-option-function`. --- --- The expression is also evaluated when 'textwidth' is set and adding --- text beyond that limit. This happens under the same conditions as --- when internal formatting is used. Make sure the cursor is kept in the --- same spot relative to the text then! The `mode()` function will --- return "i" or "R" in this situation. --- --- When the expression evaluates to non-zero Vim will fall back to using --- the internal format mechanism. --- --- If the expression starts with s: or ``, then it is replaced with --- the script ID (`local-function`). Example: --- --- ```vim --- set formatexpr=s:MyFormatExpr() --- set formatexpr=SomeFormatExpr() --- ``` --- Otherwise, the expression is evaluated in the context of the script --- where the option was set, thus script-local items are available. --- --- The expression will be evaluated in the `sandbox` when set from a --- modeline, see `sandbox-option`. That stops the option from working, --- since changing the buffer text is not allowed. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- NOTE: This option is set to "" when 'compatible' is set. --- --- @type string vim.o.formatexpr = "" vim.o.fex = vim.o.formatexpr vim.bo.formatexpr = vim.o.formatexpr vim.bo.fex = vim.bo.formatexpr --- A pattern that is used to recognize a list header. This is used for --- the "n" flag in 'formatoptions'. --- The pattern must match exactly the text that will be the indent for --- the line below it. You can use `/\ze` to mark the end of the match --- while still checking more characters. There must be a character --- following the pattern, when it matches the whole line it is handled --- like there is no match. --- The default recognizes a number, followed by an optional punctuation --- character and white space. --- --- @type string vim.o.formatlistpat = "^\\s*\\d\\+[\\]:.)}\\t ]\\s*" vim.o.flp = vim.o.formatlistpat vim.bo.formatlistpat = vim.o.formatlistpat vim.bo.flp = vim.bo.formatlistpat --- This is a sequence of letters which describes how automatic --- formatting is to be done. --- See `fo-table` for possible values and `gq` for how to format text. --- Commas can be inserted for readability. --- To avoid problems with flags that are added in the future, use the --- "+=" and "-=" feature of ":set" `add-option-flags`. --- --- @type string vim.o.formatoptions = "tcqj" vim.o.fo = vim.o.formatoptions vim.bo.formatoptions = vim.o.formatoptions vim.bo.fo = vim.bo.formatoptions --- The name of an external program that will be used to format the lines --- selected with the `gq` operator. The program must take the input on --- stdin and produce the output on stdout. The Unix program "fmt" is --- such a program. --- If the 'formatexpr' option is not empty it will be used instead. --- Otherwise, if 'formatprg' option is an empty string, the internal --- format function will be used `C-indenting`. --- Environment variables are expanded `:set_env`. See `option-backslash` --- about including spaces and backslashes. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.formatprg = "" vim.o.fp = vim.o.formatprg vim.bo.formatprg = vim.o.formatprg vim.bo.fp = vim.bo.formatprg vim.go.formatprg = vim.o.formatprg vim.go.fp = vim.go.formatprg --- When on, the OS function fsync() will be called after saving a file --- (`:write`, `writefile()`, …), `swap-file`, `undo-persistence` and `shada-file`. --- This flushes the file to disk, ensuring that it is safely written. --- Slow on some systems: writing buffers, quitting Nvim, and other --- operations may sometimes take a few seconds. --- --- Files are ALWAYS flushed ('fsync' is ignored) when: --- - `CursorHold` event is triggered --- - `:preserve` is called --- - system signals low battery life --- - Nvim exits abnormally --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type boolean vim.o.fsync = true vim.o.fs = vim.o.fsync vim.go.fsync = vim.o.fsync vim.go.fs = vim.go.fsync --- When on, the ":substitute" flag 'g' is default on. This means that --- all matches in a line are substituted instead of one. When a 'g' flag --- is given to a ":substitute" command, this will toggle the substitution --- of all or one match. See `complex-change`. --- --- command 'gdefault' on 'gdefault' off ~ --- :s/// subst. all subst. one --- :s///g subst. one subst. all --- :s///gg subst. all subst. one --- --- NOTE: Setting this option may break plugins that rely on the default --- behavior of the 'g' flag. This will also make the 'g' flag have the --- opposite effect of that documented in `:s_g`. --- --- @type boolean vim.o.gdefault = false vim.o.gd = vim.o.gdefault vim.go.gdefault = vim.o.gdefault vim.go.gd = vim.go.gdefault --- Format to recognize for the ":grep" command output. --- This is a scanf-like string that uses the same format as the --- 'errorformat' option: see `errorformat`. --- --- If ripgrep ('grepprg') is available, this option defaults to `%f:%l:%c:%m`. --- --- @type string vim.o.grepformat = "%f:%l:%m,%f:%l%m,%f %l%m" vim.o.gfm = vim.o.grepformat vim.go.grepformat = vim.o.grepformat vim.go.gfm = vim.go.grepformat --- Program to use for the `:grep` command. This option may contain '%' --- and '#' characters, which are expanded like when used in a command- --- line. The placeholder "$*" is allowed to specify where the arguments --- will be included. Environment variables are expanded `:set_env`. See --- `option-backslash` about including spaces and backslashes. --- Special value: When 'grepprg' is set to "internal" the `:grep` command --- works like `:vimgrep`, `:lgrep` like `:lvimgrep`, `:grepadd` like --- `:vimgrepadd` and `:lgrepadd` like `:lvimgrepadd`. --- See also the section `:make_makeprg`, since most of the comments there --- apply equally to 'grepprg'. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- This option defaults to: --- - `rg --vimgrep -uu ` if ripgrep is available (`:checkhealth`), --- - `grep -HIn $* /dev/null` on Unix, --- - `findstr /n $* nul` on Windows. --- Ripgrep can perform additional filtering such as using .gitignore rules --- and skipping hidden files. This is disabled by default (see the -u option) --- to more closely match the behaviour of standard grep. --- You can make ripgrep match Vim's case handling using the --- -i/--ignore-case and -S/--smart-case options. --- An `OptionSet` autocmd can be used to set it up to match automatically. --- --- @type string vim.o.grepprg = "grep -HIn $* /dev/null" vim.o.gp = vim.o.grepprg vim.bo.grepprg = vim.o.grepprg vim.bo.gp = vim.bo.grepprg vim.go.grepprg = vim.o.grepprg vim.go.gp = vim.go.grepprg --- Configures the cursor style for each mode. Works in the GUI and many --- terminals. See `tui-cursor-shape`. --- --- To disable cursor-styling, reset the option: --- --- ```vim --- set guicursor= --- ``` --- To enable mode shapes, "Cursor" highlight, and blinking: --- --- ```vim --- set guicursor=n-v-c:block,i-ci-ve:ver25,r-cr:hor20,o:hor50 --- \,a:blinkwait700-blinkoff400-blinkon250-Cursor/lCursor --- \,sm:block-blinkwait175-blinkoff150-blinkon175 --- ``` --- The option is a comma-separated list of parts. Each part consists of a --- mode-list and an argument-list: --- mode-list:argument-list,mode-list:argument-list,.. --- The mode-list is a dash separated list of these modes: --- n Normal mode --- v Visual mode --- ve Visual mode with 'selection' "exclusive" (same as 'v', --- if not specified) --- o Operator-pending mode --- i Insert mode --- r Replace mode --- c Command-line Normal (append) mode --- ci Command-line Insert mode --- cr Command-line Replace mode --- sm showmatch in Insert mode --- a all modes --- The argument-list is a dash separated list of these arguments: --- hor{N} horizontal bar, {N} percent of the character height --- ver{N} vertical bar, {N} percent of the character width --- block block cursor, fills the whole character --- - Only one of the above three should be present. --- - Default is "block" for each mode. --- blinkwait{N} *cursor-blinking* --- blinkon{N} --- blinkoff{N} --- blink times for cursor: blinkwait is the delay before --- the cursor starts blinking, blinkon is the time that --- the cursor is shown and blinkoff is the time that the --- cursor is not shown. Times are in msec. When one of --- the numbers is zero, there is no blinking. E.g.: --- --- ```vim --- set guicursor=n:blinkon0 --- ``` --- - Default is "blinkon0" for each mode. --- {group-name} --- Highlight group that decides the color and font of the --- cursor. --- In the `TUI`: --- - `inverse`/reverse and no group-name are interpreted --- as "host-terminal default cursor colors" which --- typically means "inverted bg and fg colors". --- - `ctermfg` and `guifg` are ignored. --- {group-name}/{group-name} --- Two highlight group names, the first is used when --- no language mappings are used, the other when they --- are. `language-mapping` --- --- Examples of parts: --- n-c-v:block-nCursor In Normal, Command-line and Visual mode, use a --- block cursor with colors from the "nCursor" --- highlight group --- n-v-c-sm:block,i-ci-ve:ver25-Cursor,r-cr-o:hor20 --- In Normal et al. modes, use a block cursor --- with the default colors defined by the host --- terminal. In Insert-like modes, use --- a vertical bar cursor with colors from --- "Cursor" highlight group. In Replace-like --- modes, use an underline cursor with --- default colors. --- i-ci:ver30-iCursor-blinkwait300-blinkon200-blinkoff150 --- In Insert and Command-line Insert mode, use a --- 30% vertical bar cursor with colors from the --- "iCursor" highlight group. Blink a bit --- faster. --- --- The 'a' mode is different. It will set the given argument-list for --- all modes. It does not reset anything to defaults. This can be used --- to do a common setting for all modes. For example, to switch off --- blinking: "a:blinkon0" --- --- Examples of cursor highlighting: --- --- ```vim --- highlight Cursor gui=reverse guifg=NONE guibg=NONE --- highlight Cursor gui=NONE guifg=bg guibg=fg --- ``` --- --- --- @type string vim.o.guicursor = "n-v-c-sm:block,i-ci-ve:ver25,r-cr-o:hor20" vim.o.gcr = vim.o.guicursor vim.go.guicursor = vim.o.guicursor vim.go.gcr = vim.go.guicursor --- This is a list of fonts which will be used for the GUI version of Vim. --- In its simplest form the value is just one font name. When --- the font cannot be found you will get an error message. To try other --- font names a list can be specified, font names separated with commas. --- The first valid font is used. --- --- Spaces after a comma are ignored. To include a comma in a font name --- precede it with a backslash. Setting an option requires an extra --- backslash before a space and a backslash. See also --- `option-backslash`. For example: --- --- ```vim --- set guifont=Screen15,\ 7x13,font\\,with\\,commas --- ``` --- will make Vim try to use the font "Screen15" first, and if it fails it --- will try to use "7x13" and then "font,with,commas" instead. --- --- If none of the fonts can be loaded, Vim will keep the current setting. --- If an empty font list is given, Vim will try using other resource --- settings (for X, it will use the Vim.font resource), and finally it --- will try some builtin default which should always be there ("7x13" in --- the case of X). The font names given should be "normal" fonts. Vim --- will try to find the related bold and italic fonts. --- --- For Win32 and Mac OS: --- --- ```vim --- set guifont=* --- ``` --- will bring up a font requester, where you can pick the font you want. --- --- The font name depends on the GUI used. --- --- For Mac OSX you can use something like this: --- --- ```vim --- set guifont=Monaco:h10 --- ``` --- *E236* --- Note that the fonts must be mono-spaced (all characters have the same --- width). --- --- To preview a font on X11, you might be able to use the "xfontsel" --- program. The "xlsfonts" program gives a list of all available fonts. --- --- For the Win32 GUI *E244* *E245* --- - takes these options in the font name: --- hXX - height is XX (points, can be floating-point) --- wXX - width is XX (points, can be floating-point) --- b - bold --- i - italic --- u - underline --- s - strikeout --- cXX - character set XX. Valid charsets are: ANSI, ARABIC, --- BALTIC, CHINESEBIG5, DEFAULT, EASTEUROPE, GB2312, GREEK, --- HANGEUL, HEBREW, JOHAB, MAC, OEM, RUSSIAN, SHIFTJIS, --- SYMBOL, THAI, TURKISH, VIETNAMESE ANSI and BALTIC. --- Normally you would use "cDEFAULT". --- --- Use a ':' to separate the options. --- - A '_' can be used in the place of a space, so you don't need to use --- backslashes to escape the spaces. --- - Examples: --- --- ```vim --- set guifont=courier_new:h12:w5:b:cRUSSIAN --- set guifont=Andale_Mono:h7.5:w4.5 --- ``` --- --- --- @type string vim.o.guifont = "" vim.o.gfn = vim.o.guifont vim.go.guifont = vim.o.guifont vim.go.gfn = vim.go.guifont --- Comma-separated list of fonts to be used for double-width characters. --- The first font that can be loaded is used. --- Note: The size of these fonts must be exactly twice as wide as the one --- specified with 'guifont' and the same height. --- --- When 'guifont' has a valid font and 'guifontwide' is empty Vim will --- attempt to set 'guifontwide' to a matching double-width font. --- --- @type string vim.o.guifontwide = "" vim.o.gfw = vim.o.guifontwide vim.go.guifontwide = vim.o.guifontwide vim.go.gfw = vim.go.guifontwide --- Name of the main help file. All distributed help files should be --- placed together in one directory. Additionally, all "doc" directories --- in 'runtimepath' will be used. --- Environment variables are expanded `:set_env`. For example: --- "$VIMRUNTIME/doc/help.txt". If $VIMRUNTIME is not set, $VIM is also --- tried. Also see `$VIMRUNTIME` and `option-backslash` about including --- spaces and backslashes. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.helpfile = "$VIMRUNTIME/doc/help.txt" vim.o.hf = vim.o.helpfile vim.go.helpfile = vim.o.helpfile vim.go.hf = vim.go.helpfile --- Minimal initial height of the help window when it is opened with the --- ":help" command. The initial height of the help window is half of the --- current window, or (when the 'ea' option is on) the same as other --- windows. When the height is less than 'helpheight', the height is --- set to 'helpheight'. Set to zero to disable. --- --- @type integer vim.o.helpheight = 20 vim.o.hh = vim.o.helpheight vim.go.helpheight = vim.o.helpheight vim.go.hh = vim.go.helpheight --- Comma-separated list of languages. Vim will use the first language --- for which the desired help can be found. The English help will always --- be used as a last resort. You can add "en" to prefer English over --- another language, but that will only find tags that exist in that --- language and not in the English help. --- Example: --- --- ```vim --- set helplang=de,it --- ``` --- This will first search German, then Italian and finally English help --- files. --- When using `CTRL-]` and ":help!" in a non-English help file Vim will --- try to find the tag in the current language before using this option. --- See `help-translated`. --- --- @type string vim.o.helplang = "" vim.o.hlg = vim.o.helplang vim.go.helplang = vim.o.helplang vim.go.hlg = vim.go.helplang --- When off a buffer is unloaded (including loss of undo information) --- when it is `abandon`ed. When on a buffer becomes hidden when it is --- `abandon`ed. A buffer displayed in another window does not become --- hidden, of course. --- --- Commands that move through the buffer list sometimes hide a buffer --- although the 'hidden' option is off when these three are true: --- - the buffer is modified --- - 'autowrite' is off or writing is not possible --- - the '!' flag was used --- Also see `windows`. --- --- To hide a specific buffer use the 'bufhidden' option. --- 'hidden' is set for one command with ":hide {command}" `:hide`. --- --- @type boolean vim.o.hidden = true vim.o.hid = vim.o.hidden vim.go.hidden = vim.o.hidden vim.go.hid = vim.go.hidden --- A history of ":" commands, and a history of previous search patterns --- is remembered. This option decides how many entries may be stored in --- each of these histories (see `cmdline-editing`). --- The maximum value is 10000. --- --- @type integer vim.o.history = 10000 vim.o.hi = vim.o.history vim.go.history = vim.o.history vim.go.hi = vim.go.history --- When there is a previous search pattern, highlight all its matches. --- The `hl-Search` highlight group determines the highlighting for all --- matches not under the cursor while the `hl-CurSearch` highlight group --- (if defined) determines the highlighting for the match under the --- cursor. If `hl-CurSearch` is not defined, then `hl-Search` is used for --- both. Note that only the matching text is highlighted, any offsets --- are not applied. --- See also: 'incsearch' and `:match`. --- When you get bored looking at the highlighted matches, you can turn it --- off with `:nohlsearch`. This does not change the option value, as --- soon as you use a search command, the highlighting comes back. --- 'redrawtime' specifies the maximum time spent on finding matches. --- When the search pattern can match an end-of-line, Vim will try to --- highlight all of the matched text. However, this depends on where the --- search starts. This will be the first line in the window or the first --- line below a closed fold. A match in a previous line which is not --- drawn may not continue in a newly drawn line. --- You can specify whether the highlight status is restored on startup --- with the 'h' flag in 'shada' `shada-h`. --- --- @type boolean vim.o.hlsearch = true vim.o.hls = vim.o.hlsearch vim.go.hlsearch = vim.o.hlsearch vim.go.hls = vim.go.hlsearch --- When on, the icon text of the window will be set to the value of --- 'iconstring' (if it is not empty), or to the name of the file --- currently being edited. Only the last part of the name is used. --- Overridden by the 'iconstring' option. --- Only works if the terminal supports setting window icons. --- --- @type boolean vim.o.icon = false vim.go.icon = vim.o.icon --- When this option is not empty, it will be used for the icon text of --- the window. This happens only when the 'icon' option is on. --- Only works if the terminal supports setting window icon text --- When this option contains printf-style '%' items, they will be --- expanded according to the rules used for 'statusline'. See --- 'titlestring' for example settings. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- @type string vim.o.iconstring = "" vim.go.iconstring = vim.o.iconstring --- Ignore case in search patterns, `cmdline-completion`, when --- searching in the tags file, and `expr-==`. --- Also see 'smartcase' and 'tagcase'. --- Can be overruled by using "\c" or "\C" in the pattern, see --- `/ignorecase`. --- --- @type boolean vim.o.ignorecase = false vim.o.ic = vim.o.ignorecase vim.go.ignorecase = vim.o.ignorecase vim.go.ic = vim.go.ignorecase --- Specifies whether :lmap or an Input Method (IM) is to be used in --- Insert mode. Valid values: --- 0 :lmap is off and IM is off --- 1 :lmap is ON and IM is off --- 2 :lmap is off and IM is ON --- To always reset the option to zero when leaving Insert mode with --- this can be used: --- --- ```vim --- inoremap :set iminsert=0 --- ``` --- This makes :lmap and IM turn off automatically when leaving Insert --- mode. --- Note that this option changes when using CTRL-^ in Insert mode --- `i_CTRL-^`. --- The value is set to 1 when setting 'keymap' to a valid keymap name. --- It is also used for the argument of commands like "r" and "f". --- --- @type integer vim.o.iminsert = 0 vim.o.imi = vim.o.iminsert vim.bo.iminsert = vim.o.iminsert vim.bo.imi = vim.bo.iminsert --- Specifies whether :lmap or an Input Method (IM) is to be used when --- entering a search pattern. Valid values: --- -1 the value of 'iminsert' is used, makes it look like --- 'iminsert' is also used when typing a search pattern --- 0 :lmap is off and IM is off --- 1 :lmap is ON and IM is off --- 2 :lmap is off and IM is ON --- Note that this option changes when using CTRL-^ in Command-line mode --- `c_CTRL-^`. --- The value is set to 1 when it is not -1 and setting the 'keymap' --- option to a valid keymap name. --- --- @type integer vim.o.imsearch = -1 vim.o.ims = vim.o.imsearch vim.bo.imsearch = vim.o.imsearch vim.bo.ims = vim.bo.imsearch --- When nonempty, shows the effects of `:substitute`, `:smagic|, --- |:snomagic` and user commands with the `:command-preview` flag as you --- type. --- --- Possible values: --- nosplit Shows the effects of a command incrementally in the --- buffer. --- split Like "nosplit", but also shows partial off-screen --- results in a preview window. --- --- If the preview for built-in commands is too slow (exceeds --- 'redrawtime') then 'inccommand' is automatically disabled until --- `Command-line-mode` is done. --- --- @type string vim.o.inccommand = "nosplit" vim.o.icm = vim.o.inccommand vim.go.inccommand = vim.o.inccommand vim.go.icm = vim.go.inccommand --- Pattern to be used to find an include command. It is a search --- pattern, just like for the "/" command (See `pattern`). This option --- is used for the commands "[i", "]I", "[d", etc. --- Normally the 'isfname' option is used to recognize the file name that --- comes after the matched pattern. But if "\zs" appears in the pattern --- then the text matched from "\zs" to the end, or until "\ze" if it --- appears, is used as the file name. Use this to include characters --- that are not in 'isfname', such as a space. You can then use --- 'includeexpr' to process the matched text. --- See `option-backslash` about including spaces and backslashes. --- --- @type string vim.o.include = "" vim.o.inc = vim.o.include vim.bo.include = vim.o.include vim.bo.inc = vim.bo.include vim.go.include = vim.o.include vim.go.inc = vim.go.include --- Expression to be used to transform the string found with the 'include' --- option to a file name. Mostly useful to change "." to "/" for Java: --- --- ```vim --- setlocal includeexpr=substitute(v:fname,'\\.','/','g') --- ``` --- The "v:fname" variable will be set to the file name that was detected. --- Note the double backslash: the `:set` command first halves them, then --- one remains in the value, where "\." matches a dot literally. For --- simple character replacements `tr()` avoids the need for escaping: --- --- ```vim --- setlocal includeexpr=tr(v:fname,'.','/') --- ``` --- --- Also used for the `gf` command if an unmodified file name can't be --- found. Allows doing "gf" on the name after an 'include' statement. --- Also used for ``. --- --- If the expression starts with s: or ``, then it is replaced with --- the script ID (`local-function`). Example: --- --- ```vim --- setlocal includeexpr=s:MyIncludeExpr() --- setlocal includeexpr=SomeIncludeExpr() --- ``` --- Otherwise, the expression is evaluated in the context of the script --- where the option was set, thus script-local items are available. --- --- It is more efficient if the value is just a function call without --- arguments, see `expr-option-function`. --- --- The expression will be evaluated in the `sandbox` when set from a --- modeline, see `sandbox-option`. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- It is not allowed to change text or jump to another window while --- evaluating 'includeexpr' `textlock`. --- --- @type string vim.o.includeexpr = "" vim.o.inex = vim.o.includeexpr vim.bo.includeexpr = vim.o.includeexpr vim.bo.inex = vim.bo.includeexpr --- While typing a search command, show where the pattern, as it was typed --- so far, matches. The matched string is highlighted. If the pattern --- is invalid or not found, nothing is shown. The screen will be updated --- often, this is only useful on fast terminals. --- Note that the match will be shown, but the cursor will return to its --- original position when no match is found and when pressing . You --- still need to finish the search command with to move the --- cursor to the match. --- You can use the CTRL-G and CTRL-T keys to move to the next and --- previous match. `c_CTRL-G` `c_CTRL-T` --- Vim only searches for about half a second. With a complicated --- pattern and/or a lot of text the match may not be found. This is to --- avoid that Vim hangs while you are typing the pattern. --- The `hl-IncSearch` highlight group determines the highlighting. --- When 'hlsearch' is on, all matched strings are highlighted too while --- typing a search command. See also: 'hlsearch'. --- If you don't want to turn 'hlsearch' on, but want to highlight all --- matches while searching, you can turn on and off 'hlsearch' with --- autocmd. Example: --- --- ```vim --- augroup vimrc-incsearch-highlight --- autocmd! --- autocmd CmdlineEnter /,\? :set hlsearch --- autocmd CmdlineLeave /,\? :set nohlsearch --- augroup END --- ``` --- --- CTRL-L can be used to add one character from after the current match --- to the command line. If 'ignorecase' and 'smartcase' are set and the --- command line has no uppercase characters, the added character is --- converted to lowercase. --- CTRL-R CTRL-W can be used to add the word at the end of the current --- match, excluding the characters that were already typed. --- --- @type boolean vim.o.incsearch = true vim.o.is = vim.o.incsearch vim.go.incsearch = vim.o.incsearch vim.go.is = vim.go.incsearch --- Expression which is evaluated to obtain the proper indent for a line. --- It is used when a new line is created, for the `=` operator and --- in Insert mode as specified with the 'indentkeys' option. --- When this option is not empty, it overrules the 'cindent' and --- 'smartindent' indenting. When 'lisp' is set, this option is --- only used when 'lispoptions' contains "expr:1". --- The expression is evaluated with `v:lnum` set to the line number for --- which the indent is to be computed. The cursor is also in this line --- when the expression is evaluated (but it may be moved around). --- --- If the expression starts with s: or ``, then it is replaced with --- the script ID (`local-function`). Example: --- --- ```vim --- set indentexpr=s:MyIndentExpr() --- set indentexpr=SomeIndentExpr() --- ``` --- Otherwise, the expression is evaluated in the context of the script --- where the option was set, thus script-local items are available. --- --- The advantage of using a function call without arguments is that it is --- faster, see `expr-option-function`. --- --- The expression must return the number of spaces worth of indent. It --- can return "-1" to keep the current indent (this means 'autoindent' is --- used for the indent). --- Functions useful for computing the indent are `indent()`, `cindent()` --- and `lispindent()`. --- The evaluation of the expression must not have side effects! It must --- not change the text, jump to another window, etc. Afterwards the --- cursor position is always restored, thus the cursor may be moved. --- Normally this option would be set to call a function: --- --- ```vim --- set indentexpr=GetMyIndent() --- ``` --- Error messages will be suppressed, unless the 'debug' option contains --- "msg". --- See `indent-expression`. --- --- The expression will be evaluated in the `sandbox` when set from a --- modeline, see `sandbox-option`. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- It is not allowed to change text or jump to another window while --- evaluating 'indentexpr' `textlock`. --- --- @type string vim.o.indentexpr = "" vim.o.inde = vim.o.indentexpr vim.bo.indentexpr = vim.o.indentexpr vim.bo.inde = vim.bo.indentexpr --- A list of keys that, when typed in Insert mode, cause reindenting of --- the current line. Only happens if 'indentexpr' isn't empty. --- The format is identical to 'cinkeys', see `indentkeys-format`. --- See `C-indenting` and `indent-expression`. --- --- @type string vim.o.indentkeys = "0{,0},0),0],:,0#,!^F,o,O,e" vim.o.indk = vim.o.indentkeys vim.bo.indentkeys = vim.o.indentkeys vim.bo.indk = vim.bo.indentkeys --- When doing keyword completion in insert mode `ins-completion`, and --- 'ignorecase' is also on, the case of the match is adjusted depending --- on the typed text. If the typed text contains a lowercase letter --- where the match has an upper case letter, the completed part is made --- lowercase. If the typed text has no lowercase letters and the match --- has a lowercase letter where the typed text has an uppercase letter, --- and there is a letter before it, the completed part is made uppercase. --- With 'noinfercase' the match is used as-is. --- --- @type boolean vim.o.infercase = false vim.o.inf = vim.o.infercase vim.bo.infercase = vim.o.infercase vim.bo.inf = vim.bo.infercase --- The characters specified by this option are included in file names and --- path names. Filenames are used for commands like "gf", "[i" and in --- the tags file. It is also used for "\f" in a `pattern`. --- Multi-byte characters 256 and above are always included, only the --- characters up to 255 are specified with this option. --- For UTF-8 the characters 0xa0 to 0xff are included as well. --- Think twice before adding white space to this option. Although a --- space may appear inside a file name, the effect will be that Vim --- doesn't know where a file name starts or ends when doing completion. --- It most likely works better without a space in 'isfname'. --- --- Note that on systems using a backslash as path separator, Vim tries to --- do its best to make it work as you would expect. That is a bit --- tricky, since Vi originally used the backslash to escape special --- characters. Vim will not remove a backslash in front of a normal file --- name character on these systems, but it will on Unix and alikes. The --- '&' and '^' are not included by default, because these are special for --- cmd.exe. --- --- The format of this option is a list of parts, separated with commas. --- Each part can be a single character number or a range. A range is two --- character numbers with '-' in between. A character number can be a --- decimal number between 0 and 255 or the ASCII character itself (does --- not work for digits). Example: --- "_,-,128-140,#-43" (include '_' and '-' and the range --- 128 to 140 and '#' to 43) --- If a part starts with '^', the following character number or range --- will be excluded from the option. The option is interpreted from left --- to right. Put the excluded character after the range where it is --- included. To include '^' itself use it as the last character of the --- option or the end of a range. Example: --- "^a-z,#,^" (exclude 'a' to 'z', include '#' and '^') --- If the character is '@', all characters where isalpha() returns TRUE --- are included. Normally these are the characters a to z and A to Z, --- plus accented characters. To include '@' itself use "@-@". Examples: --- "@,^a-z" All alphabetic characters, excluding lower --- case ASCII letters. --- "a-z,A-Z,@-@" All letters plus the '@' character. --- A comma can be included by using it where a character number is --- expected. Example: --- "48-57,,,_" Digits, comma and underscore. --- A comma can be excluded by prepending a '^'. Example: --- " -~,^,,9" All characters from space to '~', excluding --- comma, plus . --- See `option-backslash` about including spaces and backslashes. --- --- @type string vim.o.isfname = "@,48-57,/,.,-,_,+,,,#,$,%,~,=" vim.o.isf = vim.o.isfname vim.go.isfname = vim.o.isfname vim.go.isf = vim.go.isfname --- The characters given by this option are included in identifiers. --- Identifiers are used in recognizing environment variables and after a --- match of the 'define' option. It is also used for "\i" in a --- `pattern`. See 'isfname' for a description of the format of this --- option. For '@' only characters up to 255 are used. --- Careful: If you change this option, it might break expanding --- environment variables. E.g., when '/' is included and Vim tries to --- expand "$HOME/.local/state/nvim/shada/main.shada". Maybe you should --- change 'iskeyword' instead. --- --- @type string vim.o.isident = "@,48-57,_,192-255" vim.o.isi = vim.o.isident vim.go.isident = vim.o.isident vim.go.isi = vim.go.isident --- Keywords are used in searching and recognizing with many commands: --- "w", "*", "[i", etc. It is also used for "\k" in a `pattern`. See --- 'isfname' for a description of the format of this option. For '@' --- characters above 255 check the "word" character class (any character --- that is not white space or punctuation). --- For C programs you could use "a-z,A-Z,48-57,_,.,-,>". --- For a help file it is set to all non-blank printable characters except --- "*", '"' and '|' (so that CTRL-] on a command finds the help for that --- command). --- When the 'lisp' option is on the '-' character is always included. --- This option also influences syntax highlighting, unless the syntax --- uses `:syn-iskeyword`. --- --- @type string vim.o.iskeyword = "@,48-57,_,192-255" vim.o.isk = vim.o.iskeyword vim.bo.iskeyword = vim.o.iskeyword vim.bo.isk = vim.bo.iskeyword --- The characters given by this option are displayed directly on the --- screen. It is also used for "\p" in a `pattern`. The characters from --- space (ASCII 32) to '~' (ASCII 126) are always displayed directly, --- even when they are not included in 'isprint' or excluded. See --- 'isfname' for a description of the format of this option. --- --- Non-printable characters are displayed with two characters: --- 0 - 31 "^@" - "^_" --- 32 - 126 always single characters --- 127 "^?" --- 128 - 159 "~@" - "~_" --- 160 - 254 "| " - "|~" --- 255 "~?" --- Illegal bytes from 128 to 255 (invalid UTF-8) are --- displayed as , with the hexadecimal value of the byte. --- When 'display' contains "uhex" all unprintable characters are --- displayed as . --- The SpecialKey highlighting will be used for unprintable characters. --- `hl-SpecialKey` --- --- Multi-byte characters 256 and above are always included, only the --- characters up to 255 are specified with this option. When a character --- is printable but it is not available in the current font, a --- replacement character will be shown. --- Unprintable and zero-width Unicode characters are displayed as . --- There is no option to specify these characters. --- --- @type string vim.o.isprint = "@,161-255" vim.o.isp = vim.o.isprint vim.go.isprint = vim.o.isprint vim.go.isp = vim.go.isprint --- Insert two spaces after a '.', '?' and '!' with a join command. --- Otherwise only one space is inserted. --- --- @type boolean vim.o.joinspaces = false vim.o.js = vim.o.joinspaces vim.go.joinspaces = vim.o.joinspaces vim.go.js = vim.go.joinspaces --- List of words that change the behavior of the `jumplist`. --- stack Make the jumplist behave like the tagstack. --- Relative location of entries in the jumplist is --- preserved at the cost of discarding subsequent entries --- when navigating backwards in the jumplist and then --- jumping to a location. `jumplist-stack` --- --- view When moving through the jumplist, `changelist|, --- |alternate-file` or using `mark-motions` try to --- restore the `mark-view` in which the action occurred. --- --- clean Remove unloaded buffers from the jumplist. --- EXPERIMENTAL: this flag may change in the future. --- --- @type string vim.o.jumpoptions = "clean" vim.o.jop = vim.o.jumpoptions vim.go.jumpoptions = vim.o.jumpoptions vim.go.jop = vim.go.jumpoptions --- Name of a keyboard mapping. See `mbyte-keymap`. --- Setting this option to a valid keymap name has the side effect of --- setting 'iminsert' to one, so that the keymap becomes effective. --- 'imsearch' is also set to one, unless it was -1 --- Only alphanumeric characters, '.', '-' and '_' can be used. --- --- @type string vim.o.keymap = "" vim.o.kmp = vim.o.keymap vim.bo.keymap = vim.o.keymap vim.bo.kmp = vim.bo.keymap --- List of comma-separated words, which enable special things that keys --- can do. These values can be used: --- startsel Using a shifted special key starts selection (either --- Select mode or Visual mode, depending on "key" being --- present in 'selectmode'). --- stopsel Using a not-shifted special key stops selection. --- Special keys in this context are the cursor keys, , , --- and . --- --- @type string vim.o.keymodel = "" vim.o.km = vim.o.keymodel vim.go.keymodel = vim.o.keymodel vim.go.km = vim.go.keymodel --- Program to use for the `K` command. Environment variables are --- expanded `:set_env`. ":help" may be used to access the Vim internal --- help. (Note that previously setting the global option to the empty --- value did this, which is now deprecated.) --- When the first character is ":", the command is invoked as a Vim --- Ex command prefixed with [count]. --- When "man" or "man -s" is used, Vim will automatically translate --- a [count] for the "K" command to a section number. --- See `option-backslash` about including spaces and backslashes. --- Example: --- --- ```vim --- set keywordprg=man\ -s --- set keywordprg=:Man --- ``` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.keywordprg = ":Man" vim.o.kp = vim.o.keywordprg vim.bo.keywordprg = vim.o.keywordprg vim.bo.kp = vim.bo.keywordprg vim.go.keywordprg = vim.o.keywordprg vim.go.kp = vim.go.keywordprg --- This option allows switching your keyboard into a special language --- mode. When you are typing text in Insert mode the characters are --- inserted directly. When in Normal mode the 'langmap' option takes --- care of translating these special characters to the original meaning --- of the key. This means you don't have to change the keyboard mode to --- be able to execute Normal mode commands. --- This is the opposite of the 'keymap' option, where characters are --- mapped in Insert mode. --- Also consider setting 'langremap' to off, to prevent 'langmap' from --- applying to characters resulting from a mapping. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- Example (for Greek, in UTF-8): *greek* --- --- ```vim --- set langmap=ΑA,ΒB,ΨC,ΔD,ΕE,ΦF,ΓG,ΗH,ΙI,ΞJ,ΚK,ΛL,ΜM,ΝN,ΟO,ΠP,QQ,ΡR,ΣS,ΤT,ΘU,ΩV,WW,ΧX,ΥY,ΖZ,αa,βb,ψc,δd,εe,φf,γg,ηh,ιi,ξj,κk,λl,μm,νn,οo,πp,qq,ρr,σs,τt,θu,ωv,ςw,χx,υy,ζz --- ``` --- Example (exchanges meaning of z and y for commands): --- --- ```vim --- set langmap=zy,yz,ZY,YZ --- ``` --- --- The 'langmap' option is a list of parts, separated with commas. Each --- part can be in one of two forms: --- 1. A list of pairs. Each pair is a "from" character immediately --- followed by the "to" character. Examples: "aA", "aAbBcC". --- 2. A list of "from" characters, a semicolon and a list of "to" --- characters. Example: "abc;ABC" --- Example: "aA,fgh;FGH,cCdDeE" --- Special characters need to be preceded with a backslash. These are --- ";", ',', '"', '|' and backslash itself. --- --- This will allow you to activate vim actions without having to switch --- back and forth between the languages. Your language characters will --- be understood as normal vim English characters (according to the --- langmap mappings) in the following cases: --- o Normal/Visual mode (commands, buffer/register names, user mappings) --- o Insert/Replace Mode: Register names after CTRL-R --- o Insert/Replace Mode: Mappings --- Characters entered in Command-line mode will NOT be affected by --- this option. Note that this option can be changed at any time --- allowing to switch between mappings for different languages/encodings. --- Use a mapping to avoid having to type it each time! --- --- @type string vim.o.langmap = "" vim.o.lmap = vim.o.langmap vim.go.langmap = vim.o.langmap vim.go.lmap = vim.go.langmap --- Language to use for menu translation. Tells which file is loaded --- from the "lang" directory in 'runtimepath': --- --- ```vim --- "lang/menu_" .. &langmenu .. ".vim" --- ``` --- (without the spaces). For example, to always use the Dutch menus, no --- matter what $LANG is set to: --- --- ```vim --- set langmenu=nl_NL.ISO_8859-1 --- ``` --- When 'langmenu' is empty, `v:lang` is used. --- Only normal file name characters can be used, `/\*?[|<>` are illegal. --- If your $LANG is set to a non-English language but you do want to use --- the English menus: --- --- ```vim --- set langmenu=none --- ``` --- This option must be set before loading menus, switching on filetype --- detection or syntax highlighting. Once the menus are defined setting --- this option has no effect. But you could do this: --- --- ```vim --- source $VIMRUNTIME/delmenu.vim --- set langmenu=de_DE.ISO_8859-1 --- source $VIMRUNTIME/menu.vim --- ``` --- Warning: This deletes all menus that you defined yourself! --- --- @type string vim.o.langmenu = "" vim.o.lm = vim.o.langmenu vim.go.langmenu = vim.o.langmenu vim.go.lm = vim.go.langmenu --- When off, setting 'langmap' does not apply to characters resulting from --- a mapping. If setting 'langmap' disables some of your mappings, make --- sure this option is off. --- --- @type boolean vim.o.langremap = false vim.o.lrm = vim.o.langremap vim.go.langremap = vim.o.langremap vim.go.lrm = vim.go.langremap --- The value of this option influences when the last window will have a --- status line: --- 0: never --- 1: only if there are at least two windows --- 2: always --- 3: always and ONLY the last window --- The screen looks nicer with a status line if you have several --- windows, but it takes another screen line. `status-line` --- --- @type integer vim.o.laststatus = 2 vim.o.ls = vim.o.laststatus vim.go.laststatus = vim.o.laststatus vim.go.ls = vim.go.laststatus --- When this option is set, the screen will not be redrawn while --- executing macros, registers and other commands that have not been --- typed. Also, updating the window title is postponed. To force an --- update use `:redraw`. --- This may occasionally cause display errors. It is only meant to be set --- temporarily when performing an operation where redrawing may cause --- flickering or cause a slowdown. --- --- @type boolean vim.o.lazyredraw = false vim.o.lz = vim.o.lazyredraw vim.go.lazyredraw = vim.o.lazyredraw vim.go.lz = vim.go.lazyredraw --- If on, Vim will wrap long lines at a character in 'breakat' rather --- than at the last character that fits on the screen. Unlike --- 'wrapmargin' and 'textwidth', this does not insert s in the file, --- it only affects the way the file is displayed, not its contents. --- If 'breakindent' is set, line is visually indented. Then, the value --- of 'showbreak' is used to put in front of wrapped lines. This option --- is not used when the 'wrap' option is off. --- Note that characters after an are mostly not displayed --- with the right amount of white space. --- --- @type boolean vim.o.linebreak = false vim.o.lbr = vim.o.linebreak vim.wo.linebreak = vim.o.linebreak vim.wo.lbr = vim.wo.linebreak --- Number of lines of the Vim window. --- Normally you don't need to set this. It is done automatically by the --- terminal initialization code. --- When Vim is running in the GUI or in a resizable window, setting this --- option will cause the window size to be changed. When you only want --- to use the size for the GUI, put the command in your `gvimrc` file. --- Vim limits the number of lines to what fits on the screen. You can --- use this command to get the tallest window possible: --- --- ```vim --- set lines=999 --- ``` --- Minimum value is 2, maximum value is 1000. --- --- @type integer vim.o.lines = 24 vim.go.lines = vim.o.lines --- only in the GUI --- Number of pixel lines inserted between characters. Useful if the font --- uses the full character cell height, making lines touch each other. --- When non-zero there is room for underlining. --- With some fonts there can be too much room between lines (to have --- space for ascents and descents). Then it makes sense to set --- 'linespace' to a negative value. This may cause display problems --- though! --- --- @type integer vim.o.linespace = 0 vim.o.lsp = vim.o.linespace vim.go.linespace = vim.o.linespace vim.go.lsp = vim.go.linespace --- Lisp mode: When is typed in insert mode set the indent for --- the next line to Lisp standards (well, sort of). Also happens with --- "cc" or "S". 'autoindent' must also be on for this to work. The 'p' --- flag in 'cpoptions' changes the method of indenting: Vi compatible or --- better. Also see 'lispwords'. --- The '-' character is included in keyword characters. Redefines the --- "=" operator to use this same indentation algorithm rather than --- calling an external program if 'equalprg' is empty. --- --- @type boolean vim.o.lisp = false vim.bo.lisp = vim.o.lisp --- Comma-separated list of items that influence the Lisp indenting when --- enabled with the `'lisp'` option. Currently only one item is --- supported: --- expr:1 use 'indentexpr' for Lisp indenting when it is set --- expr:0 do not use 'indentexpr' for Lisp indenting (default) --- Note that when using 'indentexpr' the `=` operator indents all the --- lines, otherwise the first line is not indented (Vi-compatible). --- --- @type string vim.o.lispoptions = "" vim.o.lop = vim.o.lispoptions vim.bo.lispoptions = vim.o.lispoptions vim.bo.lop = vim.bo.lispoptions --- Comma-separated list of words that influence the Lisp indenting when --- enabled with the `'lisp'` option. --- --- @type string vim.o.lispwords = "defun,define,defmacro,set!,lambda,if,case,let,flet,let*,letrec,do,do*,define-syntax,let-syntax,letrec-syntax,destructuring-bind,defpackage,defparameter,defstruct,deftype,defvar,do-all-symbols,do-external-symbols,do-symbols,dolist,dotimes,ecase,etypecase,eval-when,labels,macrolet,multiple-value-bind,multiple-value-call,multiple-value-prog1,multiple-value-setq,prog1,progv,typecase,unless,unwind-protect,when,with-input-from-string,with-open-file,with-open-stream,with-output-to-string,with-package-iterator,define-condition,handler-bind,handler-case,restart-bind,restart-case,with-simple-restart,store-value,use-value,muffle-warning,abort,continue,with-slots,with-slots*,with-accessors,with-accessors*,defclass,defmethod,print-unreadable-object" vim.o.lw = vim.o.lispwords vim.bo.lispwords = vim.o.lispwords vim.bo.lw = vim.bo.lispwords vim.go.lispwords = vim.o.lispwords vim.go.lw = vim.go.lispwords --- List mode: By default, show tabs as ">", trailing spaces as "-", and --- non-breakable space characters as "+". Useful to see the difference --- between tabs and spaces and for trailing blanks. Further changed by --- the 'listchars' option. --- --- When 'listchars' does not contain "tab" field, tabs are shown as "^I" --- or "<09>", like how unprintable characters are displayed. --- --- The cursor is displayed at the start of the space a Tab character --- occupies, not at the end as usual in Normal mode. To get this cursor --- position while displaying Tabs with spaces, use: --- --- ```vim --- set list lcs=tab:\ \ --- ``` --- --- Note that list mode will also affect formatting (set with 'textwidth' --- or 'wrapmargin') when 'cpoptions' includes 'L'. See 'listchars' for --- changing the way tabs are displayed. --- --- @type boolean vim.o.list = false vim.wo.list = vim.o.list --- Strings to use in 'list' mode and for the `:list` command. It is a --- comma-separated list of string settings. *E1511* --- --- *lcs-eol* --- eol:c Character to show at the end of each line. When --- omitted, there is no extra character at the end of the --- line. --- *lcs-tab* --- tab:xy[z] Two or three characters to be used to show a tab. --- The third character is optional. --- --- tab:xy The 'x' is always used, then 'y' as many times as will --- fit. Thus "tab:>-" displays: --- ``` --- --- ``` --- >- --- >-- --- etc. --- ``` --- --- tab:xyz The 'z' is always used, then 'x' is prepended, and --- then 'y' is used as many times as will fit. Thus --- "tab:<->" displays: --- ``` --- --- ``` --- <> --- <-> --- <--> --- etc. --- ``` --- --- When "tab:" is omitted, a tab is shown as ^I. --- *lcs-space* --- space:c Character to show for a space. When omitted, spaces --- are left blank. --- *lcs-multispace* --- multispace:c... --- One or more characters to use cyclically to show for --- multiple consecutive spaces. Overrides the "space" --- setting, except for single spaces. When omitted, the --- "space" setting is used. For example, --- `:set listchars=multispace:---+` shows ten consecutive --- spaces as: --- ``` --- ---+---+-- --- ``` --- --- *lcs-lead* --- lead:c Character to show for leading spaces. When omitted, --- leading spaces are blank. Overrides the "space" and --- "multispace" settings for leading spaces. You can --- combine it with "tab:", for example: --- --- ```vim --- set listchars+=tab:>-,lead:. --- ``` --- --- *lcs-leadmultispace* --- leadmultispace:c... --- Like the `lcs-multispace` value, but for leading --- spaces only. Also overrides `lcs-lead` for leading --- multiple spaces. --- `:set listchars=leadmultispace:---+` shows ten --- consecutive leading spaces as: --- ``` --- ---+---+--XXX --- ``` --- --- Where "XXX" denotes the first non-blank characters in --- the line. --- *lcs-trail* --- trail:c Character to show for trailing spaces. When omitted, --- trailing spaces are blank. Overrides the "space" and --- "multispace" settings for trailing spaces. --- *lcs-extends* --- extends:c Character to show in the last column, when 'wrap' is --- off and the line continues beyond the right of the --- screen. --- *lcs-precedes* --- precedes:c Character to show in the first visible column of the --- physical line, when there is text preceding the --- character visible in the first column. --- *lcs-conceal* --- conceal:c Character to show in place of concealed text, when --- 'conceallevel' is set to 1. A space when omitted. --- *lcs-nbsp* --- nbsp:c Character to show for a non-breakable space character --- (0xA0 (160 decimal) and U+202F). Left blank when --- omitted. --- --- The characters ':' and ',' should not be used. UTF-8 characters can --- be used. All characters must be single width. *E1512* --- --- Each character can be specified as hex: --- --- ```vim --- set listchars=eol:\\x24 --- set listchars=eol:\\u21b5 --- set listchars=eol:\\U000021b5 --- ``` --- Note that a double backslash is used. The number of hex characters --- must be exactly 2 for \\x, 4 for \\u and 8 for \\U. --- --- Examples: --- --- ```vim --- set lcs=tab:>-,trail:- --- set lcs=tab:>-,eol:<,nbsp:% --- set lcs=extends:>,precedes:< --- ``` --- `hl-NonText` highlighting will be used for "eol", "extends" and --- "precedes". `hl-Whitespace` for "nbsp", "space", "tab", "multispace", --- "lead" and "trail". --- --- @type string vim.o.listchars = "tab:> ,trail:-,nbsp:+" vim.o.lcs = vim.o.listchars vim.wo.listchars = vim.o.listchars vim.wo.lcs = vim.wo.listchars vim.go.listchars = vim.o.listchars vim.go.lcs = vim.go.listchars --- When on the plugin scripts are loaded when starting up `load-plugins`. --- This option can be reset in your `vimrc` file to disable the loading --- of plugins. --- Note that using the "-u NONE" and "--noplugin" command line arguments --- reset this option. `-u` `--noplugin` --- --- @type boolean vim.o.loadplugins = true vim.o.lpl = vim.o.loadplugins vim.go.loadplugins = vim.o.loadplugins vim.go.lpl = vim.go.loadplugins --- Changes the special characters that can be used in search patterns. --- See `pattern`. --- WARNING: Switching this option off most likely breaks plugins! That --- is because many patterns assume it's on and will fail when it's off. --- Only switch it off when working with old Vi scripts. In any other --- situation write patterns that work when 'magic' is on. Include "\M" --- when you want to `/\M`. --- --- @type boolean vim.o.magic = true vim.go.magic = vim.o.magic --- Name of the errorfile for the `:make` command (see `:make_makeprg`) --- and the `:grep` command. --- When it is empty, an internally generated temp file will be used. --- When "##" is included, it is replaced by a number to make the name --- unique. This makes sure that the ":make" command doesn't overwrite an --- existing file. --- NOT used for the ":cf" command. See 'errorfile' for that. --- Environment variables are expanded `:set_env`. --- See `option-backslash` about including spaces and backslashes. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.makeef = "" vim.o.mef = vim.o.makeef vim.go.makeef = vim.o.makeef vim.go.mef = vim.go.makeef --- Encoding used for reading the output of external commands. When empty, --- encoding is not converted. --- This is used for `:make`, `:lmake`, `:grep`, `:lgrep`, `:grepadd`, --- `:lgrepadd`, `:cfile`, `:cgetfile`, `:caddfile`, `:lfile`, `:lgetfile`, --- and `:laddfile`. --- --- This would be mostly useful when you use MS-Windows. If iconv is --- enabled, setting 'makeencoding' to "char" has the same effect as --- setting to the system locale encoding. Example: --- --- ```vim --- set makeencoding=char " system locale is used --- ``` --- --- --- @type string vim.o.makeencoding = "" vim.o.menc = vim.o.makeencoding vim.bo.makeencoding = vim.o.makeencoding vim.bo.menc = vim.bo.makeencoding vim.go.makeencoding = vim.o.makeencoding vim.go.menc = vim.go.makeencoding --- Program to use for the ":make" command. See `:make_makeprg`. --- This option may contain '%' and '#' characters (see `:_%` and `:_#`), --- which are expanded to the current and alternate file name. Use `::S` --- to escape file names in case they contain special characters. --- Environment variables are expanded `:set_env`. See `option-backslash` --- about including spaces and backslashes. --- Note that a '|' must be escaped twice: once for ":set" and once for --- the interpretation of a command. When you use a filter called --- "myfilter" do it like this: --- --- ```vim --- set makeprg=gmake\ \\\|\ myfilter --- ``` --- The placeholder "$*" can be given (even multiple times) to specify --- where the arguments will be included, for example: --- --- ```vim --- set makeprg=latex\ \\\\nonstopmode\ \\\\input\\{$*} --- ``` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.makeprg = "make" vim.o.mp = vim.o.makeprg vim.bo.makeprg = vim.o.makeprg vim.bo.mp = vim.bo.makeprg vim.go.makeprg = vim.o.makeprg vim.go.mp = vim.go.makeprg --- Characters that form pairs. The `%` command jumps from one to the --- other. --- Only character pairs are allowed that are different, thus you cannot --- jump between two double quotes. --- The characters must be separated by a colon. --- The pairs must be separated by a comma. Example for including '<' and --- '>' (for HTML): --- --- ```vim --- set mps+=<:> --- ``` --- A more exotic example, to jump between the '=' and ';' in an --- assignment, useful for languages like C and Java: --- --- ```vim --- au FileType c,cpp,java set mps+==:; --- ``` --- For a more advanced way of using "%", see the matchit.vim plugin in --- the $VIMRUNTIME/plugin directory. `add-local-help` --- --- @type string vim.o.matchpairs = "(:),{:},[:]" vim.o.mps = vim.o.matchpairs vim.bo.matchpairs = vim.o.matchpairs vim.bo.mps = vim.bo.matchpairs --- Tenths of a second to show the matching paren, when 'showmatch' is --- set. Note that this is not in milliseconds, like other options that --- set a time. This is to be compatible with Nvi. --- --- @type integer vim.o.matchtime = 5 vim.o.mat = vim.o.matchtime vim.go.matchtime = vim.o.matchtime vim.go.mat = vim.go.matchtime --- Maximum depth of function calls for user functions. This normally --- catches endless recursion. When using a recursive function with --- more depth, set 'maxfuncdepth' to a bigger number. But this will use --- more memory, there is the danger of failing when memory is exhausted. --- Increasing this limit above 200 also changes the maximum for Ex --- command recursion, see `E169`. --- See also `:function`. --- Also used for maximum depth of callback functions. --- --- @type integer vim.o.maxfuncdepth = 100 vim.o.mfd = vim.o.maxfuncdepth vim.go.maxfuncdepth = vim.o.maxfuncdepth vim.go.mfd = vim.go.maxfuncdepth --- Maximum number of times a mapping is done without resulting in a --- character to be used. This normally catches endless mappings, like --- ":map x y" with ":map y x". It still does not catch ":map g wg", --- because the 'w' is used before the next mapping is done. See also --- `key-mapping`. --- --- @type integer vim.o.maxmapdepth = 1000 vim.o.mmd = vim.o.maxmapdepth vim.go.maxmapdepth = vim.o.maxmapdepth vim.go.mmd = vim.go.maxmapdepth --- Maximum amount of memory (in Kbyte) to use for pattern matching. --- The maximum value is about 2000000. Use this to work without a limit. --- *E363* --- When Vim runs into the limit it gives an error message and mostly --- behaves like CTRL-C was typed. --- Running into the limit often means that the pattern is very --- inefficient or too complex. This may already happen with the pattern --- "\(.\)*" on a very long line. ".*" works much better. --- Might also happen on redraw, when syntax rules try to match a complex --- text structure. --- Vim may run out of memory before hitting the 'maxmempattern' limit, in --- which case you get an "Out of memory" error instead. --- --- @type integer vim.o.maxmempattern = 1000 vim.o.mmp = vim.o.maxmempattern vim.go.maxmempattern = vim.o.maxmempattern vim.go.mmp = vim.go.maxmempattern --- Maximum number of items to use in a menu. Used for menus that are --- generated from a list of items, e.g., the Buffers menu. Changing this --- option has no direct effect, the menu must be refreshed first. --- --- @type integer vim.o.menuitems = 25 vim.o.mis = vim.o.menuitems vim.go.menuitems = vim.o.menuitems vim.go.mis = vim.go.menuitems --- Parameters for `:mkspell`. This tunes when to start compressing the --- word tree. Compression can be slow when there are many words, but --- it's needed to avoid running out of memory. The amount of memory used --- per word depends very much on how similar the words are, that's why --- this tuning is complicated. --- --- There are three numbers, separated by commas: --- ``` --- {start},{inc},{added} --- ``` --- --- For most languages the uncompressed word tree fits in memory. {start} --- gives the amount of memory in Kbyte that can be used before any --- compression is done. It should be a bit smaller than the amount of --- memory that is available to Vim. --- --- When going over the {start} limit the {inc} number specifies the --- amount of memory in Kbyte that can be allocated before another --- compression is done. A low number means compression is done after --- less words are added, which is slow. A high number means more memory --- will be allocated. --- --- After doing compression, {added} times 1024 words can be added before --- the {inc} limit is ignored and compression is done when any extra --- amount of memory is needed. A low number means there is a smaller --- chance of hitting the {inc} limit, less memory is used but it's --- slower. --- --- The languages for which these numbers are important are Italian and --- Hungarian. The default works for when you have about 512 Mbyte. If --- you have 1 Gbyte you could use: --- --- ```vim --- set mkspellmem=900000,3000,800 --- ``` --- If you have less than 512 Mbyte `:mkspell` may fail for some --- languages, no matter what you set 'mkspellmem' to. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.mkspellmem = "460000,2000,500" vim.o.msm = vim.o.mkspellmem vim.go.mkspellmem = vim.o.mkspellmem vim.go.msm = vim.go.mkspellmem --- If 'modeline' is on 'modelines' gives the number of lines that is --- checked for set commands. If 'modeline' is off or 'modelines' is zero --- no lines are checked. See `modeline`. --- --- @type boolean vim.o.modeline = true vim.o.ml = vim.o.modeline vim.bo.modeline = vim.o.modeline vim.bo.ml = vim.bo.modeline --- When on allow some options that are an expression to be set in the --- modeline. Check the option for whether it is affected by --- 'modelineexpr'. Also see `modeline`. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type boolean vim.o.modelineexpr = false vim.o.mle = vim.o.modelineexpr vim.go.modelineexpr = vim.o.modelineexpr vim.go.mle = vim.go.modelineexpr --- If 'modeline' is on 'modelines' gives the number of lines that is --- checked for set commands. If 'modeline' is off or 'modelines' is zero --- no lines are checked. See `modeline`. --- --- --- @type integer vim.o.modelines = 5 vim.o.mls = vim.o.modelines vim.go.modelines = vim.o.modelines vim.go.mls = vim.go.modelines --- When off the buffer contents cannot be changed. The 'fileformat' and --- 'fileencoding' options also can't be changed. --- Can be reset on startup with the `-M` command line argument. --- --- @type boolean vim.o.modifiable = true vim.o.ma = vim.o.modifiable vim.bo.modifiable = vim.o.modifiable vim.bo.ma = vim.bo.modifiable --- When on, the buffer is considered to be modified. This option is set --- when: --- 1. A change was made to the text since it was last written. Using the --- `undo` command to go back to the original text will reset the --- option. But undoing changes that were made before writing the --- buffer will set the option again, since the text is different from --- when it was written. --- 2. 'fileformat' or 'fileencoding' is different from its original --- value. The original value is set when the buffer is read or --- written. A ":set nomodified" command also resets the original --- values to the current values and the 'modified' option will be --- reset. --- Similarly for 'eol' and 'bomb'. --- This option is not set when a change is made to the buffer as the --- result of a BufNewFile, BufRead/BufReadPost, BufWritePost, --- FileAppendPost or VimLeave autocommand event. See `gzip-example` for --- an explanation. --- When 'buftype' is "nowrite" or "nofile" this option may be set, but --- will be ignored. --- Note that the text may actually be the same, e.g. 'modified' is set --- when using "rA" on an "A". --- --- @type boolean vim.o.modified = false vim.o.mod = vim.o.modified vim.bo.modified = vim.o.modified vim.bo.mod = vim.bo.modified --- When on, listings pause when the whole screen is filled. You will get --- the `more-prompt`. When this option is off there are no pauses, the --- listing continues until finished. --- --- @type boolean vim.o.more = true vim.go.more = vim.o.more --- Enables mouse support. For example, to enable the mouse in Normal mode --- and Visual mode: --- --- ```vim --- set mouse=nv --- ``` --- --- To temporarily disable mouse support, hold the shift key while using --- the mouse. --- --- Mouse support can be enabled for different modes: --- n Normal mode --- v Visual mode --- i Insert mode --- c Command-line mode --- h all previous modes when editing a help file --- a all previous modes --- r for `hit-enter` and `more-prompt` prompt --- --- Left-click anywhere in a text buffer to place the cursor there. This --- works with operators too, e.g. type `d` then left-click to delete text --- from the current cursor position to the position where you clicked. --- --- Drag the `status-line` or vertical separator of a window to resize it. --- --- If enabled for "v" (Visual mode) then double-click selects word-wise, --- triple-click makes it line-wise, and quadruple-click makes it --- rectangular block-wise. --- --- For scrolling with a mouse wheel see `scroll-mouse-wheel`. --- --- Note: When enabling the mouse in a terminal, copy/paste will use the --- "* register if possible. See also 'clipboard'. --- --- Related options: --- 'mousefocus' window focus follows mouse pointer --- 'mousemodel' what mouse button does which action --- 'mousehide' hide mouse pointer while typing text --- 'selectmode' whether to start Select mode or Visual mode --- --- @type string vim.o.mouse = "nvi" vim.go.mouse = vim.o.mouse --- The window that the mouse pointer is on is automatically activated. --- When changing the window layout or window focus in another way, the --- mouse pointer is moved to the window with keyboard focus. Off is the --- default because it makes using the pull down menus a little goofy, as --- a pointer transit may activate a window unintentionally. --- --- @type boolean vim.o.mousefocus = false vim.o.mousef = vim.o.mousefocus vim.go.mousefocus = vim.o.mousefocus vim.go.mousef = vim.go.mousefocus --- only in the GUI --- When on, the mouse pointer is hidden when characters are typed. --- The mouse pointer is restored when the mouse is moved. --- --- @type boolean vim.o.mousehide = true vim.o.mh = vim.o.mousehide vim.go.mousehide = vim.o.mousehide vim.go.mh = vim.go.mousehide --- Sets the model to use for the mouse. The name mostly specifies what --- the right mouse button is used for: --- extend Right mouse button extends a selection. This works --- like in an xterm. --- popup Right mouse button pops up a menu. The shifted left --- mouse button extends a selection. This works like --- with Microsoft Windows. --- popup_setpos Like "popup", but the cursor will be moved to the --- position where the mouse was clicked, and thus the --- selected operation will act upon the clicked object. --- If clicking inside a selection, that selection will --- be acted upon, i.e. no cursor move. This implies of --- course, that right clicking outside a selection will --- end Visual mode. --- Overview of what button does what for each model: --- mouse extend popup(_setpos) ~ --- left click place cursor place cursor --- left drag start selection start selection --- shift-left search word extend selection --- right click extend selection popup menu (place cursor) --- right drag extend selection - --- middle click paste paste --- --- In the "popup" model the right mouse button produces a pop-up menu. --- Nvim creates a default `popup-menu` but you can redefine it. --- --- Note that you can further refine the meaning of buttons with mappings. --- See `mouse-overview`. But mappings are NOT used for modeless selection. --- --- Example: --- --- ```vim --- map --- map --- map --- map <2-S-LeftMouse> <2-RightMouse> --- map <2-S-LeftDrag> <2-RightDrag> --- map <2-S-LeftRelease> <2-RightRelease> --- map <3-S-LeftMouse> <3-RightMouse> --- map <3-S-LeftDrag> <3-RightDrag> --- map <3-S-LeftRelease> <3-RightRelease> --- map <4-S-LeftMouse> <4-RightMouse> --- map <4-S-LeftDrag> <4-RightDrag> --- map <4-S-LeftRelease> <4-RightRelease> --- ``` --- --- Mouse commands requiring the CTRL modifier can be simulated by typing --- the "g" key before using the mouse: --- "g" is " (jump to tag under mouse click) --- "g" is " ("CTRL-T") --- --- @type string vim.o.mousemodel = "popup_setpos" vim.o.mousem = vim.o.mousemodel vim.go.mousemodel = vim.o.mousemodel vim.go.mousem = vim.go.mousemodel --- When on, mouse move events are delivered to the input queue and are --- available for mapping. The default, off, avoids the mouse movement --- overhead except when needed. --- Warning: Setting this option can make pending mappings to be aborted --- when the mouse is moved. --- --- @type boolean vim.o.mousemoveevent = false vim.o.mousemev = vim.o.mousemoveevent vim.go.mousemoveevent = vim.o.mousemoveevent vim.go.mousemev = vim.go.mousemoveevent --- This option controls the number of lines / columns to scroll by when --- scrolling with a mouse wheel (`scroll-mouse-wheel`). The option is --- a comma-separated list. Each part consists of a direction and a count --- as follows: --- direction:count,direction:count --- Direction is one of either "hor" or "ver". "hor" controls horizontal --- scrolling and "ver" controls vertical scrolling. Count sets the amount --- to scroll by for the given direction, it should be a non negative --- integer. Each direction should be set at most once. If a direction --- is omitted, a default value is used (6 for horizontal scrolling and 3 --- for vertical scrolling). You can disable mouse scrolling by using --- a count of 0. --- --- Example: --- --- ```vim --- set mousescroll=ver:5,hor:2 --- ``` --- Will make Nvim scroll 5 lines at a time when scrolling vertically, and --- scroll 2 columns at a time when scrolling horizontally. --- --- @type string vim.o.mousescroll = "ver:3,hor:6" vim.go.mousescroll = vim.o.mousescroll --- Defines the maximum time in msec between two mouse clicks for the --- second click to be recognized as a multi click. --- --- @type integer vim.o.mousetime = 500 vim.o.mouset = vim.o.mousetime vim.go.mousetime = vim.o.mousetime vim.go.mouset = vim.go.mousetime --- This defines what bases Vim will consider for numbers when using the --- CTRL-A and CTRL-X commands for adding to and subtracting from a number --- respectively; see `CTRL-A` for more info on these commands. --- alpha If included, single alphabetical characters will be --- incremented or decremented. This is useful for a list with a --- letter index a), b), etc. *octal-nrformats* --- octal If included, numbers that start with a zero will be considered --- to be octal. Example: Using CTRL-A on "007" results in "010". --- hex If included, numbers starting with "0x" or "0X" will be --- considered to be hexadecimal. Example: Using CTRL-X on --- "0x100" results in "0x0ff". --- bin If included, numbers starting with "0b" or "0B" will be --- considered to be binary. Example: Using CTRL-X on --- "0b1000" subtracts one, resulting in "0b0111". --- unsigned If included, numbers are recognized as unsigned. Thus a --- leading dash or negative sign won't be considered as part of --- the number. Examples: --- Using CTRL-X on "2020" in "9-2020" results in "9-2019" --- (without "unsigned" it would become "9-2021"). --- Using CTRL-A on "2020" in "9-2020" results in "9-2021" --- (without "unsigned" it would become "9-2019"). --- Using CTRL-X on "0" or CTRL-A on "18446744073709551615" --- (2^64 - 1) has no effect, overflow is prevented. --- blank If included, treat numbers as signed or unsigned based on --- preceding whitespace. If a number with a leading dash has its --- dash immediately preceded by a non-whitespace character (i.e., --- not a tab or a " "), the negative sign won't be considered as --- part of the number. For example: --- Using CTRL-A on "14" in "Carbon-14" results in "Carbon-15" --- (without "blank" it would become "Carbon-13"). --- Using CTRL-X on "8" in "Carbon -8" results in "Carbon -9" --- (because -8 is preceded by whitespace. If "unsigned" was --- set, it would result in "Carbon -7"). --- If this format is included, overflow is prevented as if --- "unsigned" were set. If both this format and "unsigned" are --- included, "unsigned" will take precedence. --- --- Numbers which simply begin with a digit in the range 1-9 are always --- considered decimal. This also happens for numbers that are not --- recognized as octal or hex. --- --- @type string vim.o.nrformats = "bin,hex" vim.o.nf = vim.o.nrformats vim.bo.nrformats = vim.o.nrformats vim.bo.nf = vim.bo.nrformats --- Print the line number in front of each line. When the 'n' option is --- excluded from 'cpoptions' a wrapped line will not use the column of --- line numbers. --- Use the 'numberwidth' option to adjust the room for the line number. --- When a long, wrapped line doesn't start with the first character, '-' --- characters are put before the number. --- For highlighting see `hl-LineNr`, `hl-CursorLineNr`, and the --- `:sign-define` "numhl" argument. --- *number_relativenumber* --- The 'relativenumber' option changes the displayed number to be --- relative to the cursor. Together with 'number' there are these --- four combinations (cursor in line 3): --- --- 'nonu' 'nu' 'nonu' 'nu' --- 'nornu' 'nornu' 'rnu' 'rnu' --- ``` --- |apple | 1 apple | 2 apple | 2 apple --- |pear | 2 pear | 1 pear | 1 pear --- |nobody | 3 nobody | 0 nobody |3 nobody --- |there | 4 there | 1 there | 1 there --- ``` --- --- --- @type boolean vim.o.number = false vim.o.nu = vim.o.number vim.wo.number = vim.o.number vim.wo.nu = vim.wo.number --- Minimal number of columns to use for the line number. Only relevant --- when the 'number' or 'relativenumber' option is set or printing lines --- with a line number. Since one space is always between the number and --- the text, there is one less character for the number itself. --- The value is the minimum width. A bigger width is used when needed to --- fit the highest line number in the buffer respectively the number of --- rows in the window, depending on whether 'number' or 'relativenumber' --- is set. Thus with the Vim default of 4 there is room for a line number --- up to 999. When the buffer has 1000 lines five columns will be used. --- The minimum value is 1, the maximum value is 20. --- --- @type integer vim.o.numberwidth = 4 vim.o.nuw = vim.o.numberwidth vim.wo.numberwidth = vim.o.numberwidth vim.wo.nuw = vim.wo.numberwidth --- This option specifies a function to be used for Insert mode omni --- completion with CTRL-X CTRL-O. `i_CTRL-X_CTRL-O` --- See `complete-functions` for an explanation of how the function is --- invoked and what it should return. The value can be the name of a --- function, a `lambda` or a `Funcref`. See `option-value-function` for --- more information. --- This option is usually set by a filetype plugin: --- `:filetype-plugin-on` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.omnifunc = "" vim.o.ofu = vim.o.omnifunc vim.bo.omnifunc = vim.o.omnifunc vim.bo.ofu = vim.bo.omnifunc --- This option specifies a function to be called by the `g@` operator. --- See `:map-operator` for more info and an example. The value can be --- the name of a function, a `lambda` or a `Funcref`. See --- `option-value-function` for more information. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.operatorfunc = "" vim.o.opfunc = vim.o.operatorfunc vim.go.operatorfunc = vim.o.operatorfunc vim.go.opfunc = vim.go.operatorfunc --- Directories used to find packages. --- See `packages` and `packages-runtimepath`. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.packpath = "..." vim.o.pp = vim.o.packpath vim.go.packpath = vim.o.packpath vim.go.pp = vim.go.packpath --- Specifies the nroff macros that separate paragraphs. These are pairs --- of two letters (see `object-motions`). --- --- @type string vim.o.paragraphs = "IPLPPPQPP TPHPLIPpLpItpplpipbp" vim.o.para = vim.o.paragraphs vim.go.paragraphs = vim.o.paragraphs vim.go.para = vim.go.paragraphs --- Expression which is evaluated to apply a patch to a file and generate --- the resulting new version of the file. See `diff-patchexpr`. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.patchexpr = "" vim.o.pex = vim.o.patchexpr vim.go.patchexpr = vim.o.patchexpr vim.go.pex = vim.go.patchexpr --- When non-empty the oldest version of a file is kept. This can be used --- to keep the original version of a file if you are changing files in a --- source distribution. Only the first time that a file is written a --- copy of the original file will be kept. The name of the copy is the --- name of the original file with the string in the 'patchmode' option --- appended. This option should start with a dot. Use a string like --- ".orig" or ".org". 'backupdir' must not be empty for this to work --- (Detail: The backup file is renamed to the patchmode file after the --- new file has been successfully written, that's why it must be possible --- to write a backup file). If there was no file to be backed up, an --- empty file is created. --- When the 'backupskip' pattern matches, a patchmode file is not made. --- Using 'patchmode' for compressed files appends the extension at the --- end (e.g., "file.gz.orig"), thus the resulting name isn't always --- recognized as a compressed file. --- Only normal file name characters can be used, `/\*?[|<>` are illegal. --- --- @type string vim.o.patchmode = "" vim.o.pm = vim.o.patchmode vim.go.patchmode = vim.o.patchmode vim.go.pm = vim.go.patchmode --- This is a list of directories which will be searched when using the --- `gf`, [f, ]f, ^Wf, `:find`, `:sfind`, `:tabfind` and other commands, --- provided that the file being searched for has a relative path (not --- starting with "/", "./" or "../"). The directories in the 'path' --- option may be relative or absolute. --- - Use commas to separate directory names: --- --- ```vim --- set path=.,/usr/local/include,/usr/include --- ``` --- - Spaces can also be used to separate directory names. To have a --- space in a directory name, precede it with an extra backslash, and --- escape the space: --- --- ```vim --- set path=.,/dir/with\\\ space --- ``` --- - To include a comma in a directory name precede it with an extra --- backslash: --- --- ```vim --- set path=.,/dir/with\\,comma --- ``` --- - To search relative to the directory of the current file, use: --- --- ```vim --- set path=. --- ``` --- - To search in the current directory use an empty string between two --- commas: --- --- ```vim --- set path=,, --- ``` --- - A directory name may end in a ':' or '/'. --- - Environment variables are expanded `:set_env`. --- - When using `netrw.vim` URLs can be used. For example, adding --- "https://www.vim.org" will make ":find index.html" work. --- - Search upwards and downwards in a directory tree using "*", "**" and --- ";". See `file-searching` for info and syntax. --- - Careful with '\' characters, type two to get one in the option: --- --- ```vim --- set path=.,c:\\include --- ``` --- Or just use '/' instead: --- --- ```vim --- set path=.,c:/include --- ``` --- Don't forget "." or files won't even be found in the same directory as --- the file! --- The maximum length is limited. How much depends on the system, mostly --- it is something like 256 or 1024 characters. --- You can check if all the include files are found, using the value of --- 'path', see `:checkpath`. --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- directories from the list. This avoids problems when a future version --- uses another default. To remove the current directory use: --- --- ```vim --- set path-= --- ``` --- To add the current directory use: --- --- ```vim --- set path+= --- ``` --- To use an environment variable, you probably need to replace the --- separator. Here is an example to append $INCL, in which directory --- names are separated with a semicolon: --- --- ```vim --- let &path = &path .. "," .. substitute($INCL, ';', ',', 'g') --- ``` --- Replace the ';' with a ':' or whatever separator is used. Note that --- this doesn't work when $INCL contains a comma or white space. --- --- @type string vim.o.path = ".,," vim.o.pa = vim.o.path vim.bo.path = vim.o.path vim.bo.pa = vim.bo.path vim.go.path = vim.o.path vim.go.pa = vim.go.path --- When changing the indent of the current line, preserve as much of the --- indent structure as possible. Normally the indent is replaced by a --- series of tabs followed by spaces as required (unless `'expandtab'` is --- enabled, in which case only spaces are used). Enabling this option --- means the indent will preserve as many existing characters as possible --- for indenting, and only add additional tabs or spaces as required. --- 'expandtab' does not apply to the preserved white space, a Tab remains --- a Tab. --- NOTE: When using ">>" multiple times the resulting indent is a mix of --- tabs and spaces. You might not like this. --- Also see 'copyindent'. --- Use `:retab` to clean up white space. --- --- @type boolean vim.o.preserveindent = false vim.o.pi = vim.o.preserveindent vim.bo.preserveindent = vim.o.preserveindent vim.bo.pi = vim.bo.preserveindent --- Default height for a preview window. Used for `:ptag` and associated --- commands. Used for `CTRL-W_}` when no count is given. --- --- @type integer vim.o.previewheight = 12 vim.o.pvh = vim.o.previewheight vim.go.previewheight = vim.o.previewheight vim.go.pvh = vim.go.previewheight --- Identifies the preview window. Only one window can have this option --- set. It's normally not set directly, but by using one of the commands --- `:ptag`, `:pedit`, etc. --- --- @type boolean vim.o.previewwindow = false vim.o.pvw = vim.o.previewwindow vim.wo.previewwindow = vim.o.previewwindow vim.wo.pvw = vim.wo.previewwindow --- Enables pseudo-transparency for the `popup-menu`. Valid values are in --- the range of 0 for fully opaque popupmenu (disabled) to 100 for fully --- transparent background. Values between 0-30 are typically most useful. --- --- It is possible to override the level for individual highlights within --- the popupmenu using `highlight-blend`. For instance, to enable --- transparency but force the current selected element to be fully opaque: --- --- ```vim --- --- set pumblend=15 --- hi PmenuSel blend=0 --- ``` --- --- UI-dependent. Works best with RGB colors. 'termguicolors' --- --- @type integer vim.o.pumblend = 0 vim.o.pb = vim.o.pumblend vim.go.pumblend = vim.o.pumblend vim.go.pb = vim.go.pumblend --- Maximum number of items to show in the popup menu --- (`ins-completion-menu`). Zero means "use available screen space". --- --- @type integer vim.o.pumheight = 0 vim.o.ph = vim.o.pumheight vim.go.pumheight = vim.o.pumheight vim.go.ph = vim.go.pumheight --- Minimum width for the popup menu (`ins-completion-menu`). If the --- cursor column + 'pumwidth' exceeds screen width, the popup menu is --- nudged to fit on the screen. --- --- @type integer vim.o.pumwidth = 15 vim.o.pw = vim.o.pumwidth vim.go.pumwidth = vim.o.pumwidth vim.go.pw = vim.go.pumwidth --- Specifies the python version used for pyx* functions and commands --- `python_x`. As only Python 3 is supported, this always has the value --- `3`. Setting any other value is an error. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type integer vim.o.pyxversion = 3 vim.o.pyx = vim.o.pyxversion vim.go.pyxversion = vim.o.pyxversion vim.go.pyx = vim.go.pyxversion --- This option specifies a function to be used to get the text to display --- in the quickfix and location list windows. This can be used to --- customize the information displayed in the quickfix or location window --- for each entry in the corresponding quickfix or location list. See --- `quickfix-window-function` for an explanation of how to write the --- function and an example. The value can be the name of a function, a --- `lambda` or a `Funcref`. See `option-value-function` for more --- information. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.quickfixtextfunc = "" vim.o.qftf = vim.o.quickfixtextfunc vim.go.quickfixtextfunc = vim.o.quickfixtextfunc vim.go.qftf = vim.go.quickfixtextfunc --- The characters that are used to escape quotes in a string. Used for --- objects like a', a" and a` `a'`. --- When one of the characters in this option is found inside a string, --- the following character will be skipped. The default value makes the --- text "foo\"bar\\" considered to be one string. --- --- @type string vim.o.quoteescape = "\\" vim.o.qe = vim.o.quoteescape vim.bo.quoteescape = vim.o.quoteescape vim.bo.qe = vim.bo.quoteescape --- If on, writes fail unless you use a '!'. Protects you from --- accidentally overwriting a file. Default on when Vim is started --- in read-only mode ("vim -R") or when the executable is called "view". --- When using ":w!" the 'readonly' option is reset for the current --- buffer, unless the 'Z' flag is in 'cpoptions'. --- When using the ":view" command the 'readonly' option is set for the --- newly edited buffer. --- See 'modifiable' for disallowing changes to the buffer. --- --- @type boolean vim.o.readonly = false vim.o.ro = vim.o.readonly vim.bo.readonly = vim.o.readonly vim.bo.ro = vim.bo.readonly --- Flags to change the way redrawing works, for debugging purposes. --- Most useful with 'writedelay' set to some reasonable value. --- Supports the following flags: --- compositor Indicate each redraw event handled by the compositor --- by briefly flashing the redrawn regions in colors --- indicating the redraw type. These are the highlight --- groups used (and their default colors): --- RedrawDebugNormal gui=reverse normal redraw passed through --- RedrawDebugClear guibg=Yellow clear event passed through --- RedrawDebugComposed guibg=Green redraw event modified by the --- compositor (due to --- overlapping grids, etc) --- RedrawDebugRecompose guibg=Red redraw generated by the --- compositor itself, due to a --- grid being moved or deleted. --- line introduce a delay after each line drawn on the screen. --- When using the TUI or another single-grid UI, "compositor" --- gives more information and should be preferred (every --- line is processed as a separate event by the compositor) --- flush introduce a delay after each "flush" event. --- nothrottle Turn off throttling of the message grid. This is an --- optimization that joins many small scrolls to one --- larger scroll when drawing the message area (with --- 'display' msgsep flag active). --- invalid Enable stricter checking (abort) of inconsistencies --- of the internal screen state. This is mostly --- useful when running nvim inside a debugger (and --- the test suite). --- nodelta Send all internally redrawn cells to the UI, even if --- they are unchanged from the already displayed state. --- --- @type string vim.o.redrawdebug = "" vim.o.rdb = vim.o.redrawdebug vim.go.redrawdebug = vim.o.redrawdebug vim.go.rdb = vim.go.redrawdebug --- Time in milliseconds for redrawing the display. Applies to --- 'hlsearch', 'inccommand', `:match` highlighting and syntax --- highlighting. --- When redrawing takes more than this many milliseconds no further --- matches will be highlighted. --- For syntax highlighting the time applies per window. When over the --- limit syntax highlighting is disabled until `CTRL-L` is used. --- This is used to avoid that Vim hangs when using a very complicated --- pattern. --- --- @type integer vim.o.redrawtime = 2000 vim.o.rdt = vim.o.redrawtime vim.go.redrawtime = vim.o.redrawtime vim.go.rdt = vim.go.redrawtime --- This selects the default regexp engine. `two-engines` --- The possible values are: --- 0 automatic selection --- 1 old engine --- 2 NFA engine --- Note that when using the NFA engine and the pattern contains something --- that is not supported the pattern will not match. This is only useful --- for debugging the regexp engine. --- Using automatic selection enables Vim to switch the engine, if the --- default engine becomes too costly. E.g., when the NFA engine uses too --- many states. This should prevent Vim from hanging on a combination of --- a complex pattern with long text. --- --- @type integer vim.o.regexpengine = 0 vim.o.re = vim.o.regexpengine vim.go.regexpengine = vim.o.regexpengine vim.go.re = vim.go.regexpengine --- Show the line number relative to the line with the cursor in front of --- each line. Relative line numbers help you use the `count` you can --- precede some vertical motion commands (e.g. j k + -) with, without --- having to calculate it yourself. Especially useful in combination with --- other commands (e.g. y d c < > gq gw =). --- When the 'n' option is excluded from 'cpoptions' a wrapped --- line will not use the column of line numbers. --- The 'numberwidth' option can be used to set the room used for the line --- number. --- When a long, wrapped line doesn't start with the first character, '-' --- characters are put before the number. --- See `hl-LineNr` and `hl-CursorLineNr` for the highlighting used for --- the number. --- --- The number in front of the cursor line also depends on the value of --- 'number', see `number_relativenumber` for all combinations of the two --- options. --- --- @type boolean vim.o.relativenumber = false vim.o.rnu = vim.o.relativenumber vim.wo.relativenumber = vim.o.relativenumber vim.wo.rnu = vim.wo.relativenumber --- Threshold for reporting number of lines changed. When the number of --- changed lines is more than 'report' a message will be given for most --- ":" commands. If you want it always, set 'report' to 0. --- For the ":substitute" command the number of substitutions is used --- instead of the number of lines. --- --- @type integer vim.o.report = 2 vim.go.report = vim.o.report --- Inserting characters in Insert mode will work backwards. See "typing --- backwards" `ins-reverse`. This option can be toggled with the CTRL-_ --- command in Insert mode, when 'allowrevins' is set. --- --- @type boolean vim.o.revins = false vim.o.ri = vim.o.revins vim.go.revins = vim.o.revins vim.go.ri = vim.go.revins --- When on, display orientation becomes right-to-left, i.e., characters --- that are stored in the file appear from the right to the left. --- Using this option, it is possible to edit files for languages that --- are written from the right to the left such as Hebrew and Arabic. --- This option is per window, so it is possible to edit mixed files --- simultaneously, or to view the same file in both ways (this is --- useful whenever you have a mixed text file with both right-to-left --- and left-to-right strings so that both sets are displayed properly --- in different windows). Also see `rileft.txt`. --- --- @type boolean vim.o.rightleft = false vim.o.rl = vim.o.rightleft vim.wo.rightleft = vim.o.rightleft vim.wo.rl = vim.wo.rightleft --- Each word in this option enables the command line editing to work in --- right-to-left mode for a group of commands: --- --- search "/" and "?" commands --- --- This is useful for languages such as Hebrew, Arabic and Farsi. --- The 'rightleft' option must be set for 'rightleftcmd' to take effect. --- --- @type string vim.o.rightleftcmd = "search" vim.o.rlc = vim.o.rightleftcmd vim.wo.rightleftcmd = vim.o.rightleftcmd vim.wo.rlc = vim.wo.rightleftcmd --- Show the line and column number of the cursor position, separated by a --- comma. When there is room, the relative position of the displayed --- text in the file is shown on the far right: --- Top first line is visible --- Bot last line is visible --- All first and last line are visible --- 45% relative position in the file --- If 'rulerformat' is set, it will determine the contents of the ruler. --- Each window has its own ruler. If a window has a status line, the --- ruler is shown there. If a window doesn't have a status line and --- 'cmdheight' is zero, the ruler is not shown. Otherwise it is shown in --- the last line of the screen. If the statusline is given by --- 'statusline' (i.e. not empty), this option takes precedence over --- 'ruler' and 'rulerformat'. --- If the number of characters displayed is different from the number of --- bytes in the text (e.g., for a TAB or a multibyte character), both --- the text column (byte number) and the screen column are shown, --- separated with a dash. --- For an empty line "0-1" is shown. --- For an empty buffer the line number will also be zero: "0,0-1". --- If you don't want to see the ruler all the time but want to know where --- you are, use "g CTRL-G" `g_CTRL-G`. --- --- @type boolean vim.o.ruler = true vim.o.ru = vim.o.ruler vim.go.ruler = vim.o.ruler vim.go.ru = vim.go.ruler --- When this option is not empty, it determines the content of the ruler --- string, as displayed for the 'ruler' option. --- The format of this option is like that of 'statusline'. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- The default ruler width is 17 characters. To make the ruler 15 --- characters wide, put "%15(" at the start and "%)" at the end. --- Example: --- --- ```vim --- set rulerformat=%15(%c%V\ %p%%%) --- ``` --- --- --- @type string vim.o.rulerformat = "" vim.o.ruf = vim.o.rulerformat vim.go.rulerformat = vim.o.rulerformat vim.go.ruf = vim.go.rulerformat --- List of directories to be searched for these runtime files: --- filetype.lua filetypes `new-filetype` --- autoload/ automatically loaded scripts `autoload-functions` --- colors/ color scheme files `:colorscheme` --- compiler/ compiler files `:compiler` --- doc/ documentation `write-local-help` --- ftplugin/ filetype plugins `write-filetype-plugin` --- indent/ indent scripts `indent-expression` --- keymap/ key mapping files `mbyte-keymap` --- lang/ menu translations `:menutrans` --- lua/ `Lua` plugins --- menu.vim GUI menus `menu.vim` --- pack/ packages `:packadd` --- parser/ `treesitter` syntax parsers --- plugin/ plugin scripts `write-plugin` --- queries/ `treesitter` queries --- rplugin/ `remote-plugin` scripts --- spell/ spell checking files `spell` --- syntax/ syntax files `mysyntaxfile` --- tutor/ tutorial files `:Tutor` --- --- And any other file searched for with the `:runtime` command. --- --- Defaults are setup to search these locations: --- 1. Your home directory, for personal preferences. --- Given by `stdpath("config")`. `$XDG_CONFIG_HOME` --- 2. Directories which must contain configuration files according to --- `xdg` ($XDG_CONFIG_DIRS, defaults to /etc/xdg). This also contains --- preferences from system administrator. --- 3. Data home directory, for plugins installed by user. --- Given by `stdpath("data")/site`. `$XDG_DATA_HOME` --- 4. nvim/site subdirectories for each directory in $XDG_DATA_DIRS. --- This is for plugins which were installed by system administrator, --- but are not part of the Nvim distribution. XDG_DATA_DIRS defaults --- to /usr/local/share/:/usr/share/, so system administrators are --- expected to install site plugins to /usr/share/nvim/site. --- 5. Session state directory, for state data such as swap, backupdir, --- viewdir, undodir, etc. --- Given by `stdpath("state")`. `$XDG_STATE_HOME` --- 6. $VIMRUNTIME, for files distributed with Nvim. --- *after-directory* --- 7, 8, 9, 10. In after/ subdirectories of 1, 2, 3 and 4, with reverse --- ordering. This is for preferences to overrule or add to the --- distributed defaults or system-wide settings (rarely needed). --- --- *packages-runtimepath* --- "start" packages will also be searched (`runtime-search-path`) for --- runtime files after these, though such packages are not explicitly --- reported in &runtimepath. But "opt" packages are explicitly added to --- &runtimepath by `:packadd`. --- --- Note that, unlike 'path', no wildcards like "**" are allowed. Normal --- wildcards are allowed, but can significantly slow down searching for --- runtime files. For speed, use as few items as possible and avoid --- wildcards. --- See `:runtime`. --- Example: --- --- ```vim --- set runtimepath=~/vimruntime,/mygroup/vim,$VIMRUNTIME --- ``` --- This will use the directory "~/vimruntime" first (containing your --- personal Nvim runtime files), then "/mygroup/vim", and finally --- "$VIMRUNTIME" (the default runtime files). --- You can put a directory before $VIMRUNTIME to find files which replace --- distributed runtime files. You can put a directory after $VIMRUNTIME --- to find files which add to distributed runtime files. --- --- With `--clean` the home directory entries are not included. --- --- @type string vim.o.runtimepath = "..." vim.o.rtp = vim.o.runtimepath vim.go.runtimepath = vim.o.runtimepath vim.go.rtp = vim.go.runtimepath --- Number of lines to scroll with CTRL-U and CTRL-D commands. Will be --- set to half the number of lines in the window when the window size --- changes. This may happen when enabling the `status-line` or --- 'tabline' option after setting the 'scroll' option. --- If you give a count to the CTRL-U or CTRL-D command it will --- be used as the new value for 'scroll'. Reset to half the window --- height with ":set scroll=0". --- --- @type integer vim.o.scroll = 0 vim.o.scr = vim.o.scroll vim.wo.scroll = vim.o.scroll vim.wo.scr = vim.wo.scroll --- Maximum number of lines kept beyond the visible screen. Lines at the --- top are deleted if new lines exceed this limit. --- Minimum is 1, maximum is 100000. --- Only in `terminal` buffers. --- --- Note: Lines that are not visible and kept in scrollback are not --- reflown when the terminal buffer is resized horizontally. --- --- @type integer vim.o.scrollback = -1 vim.o.scbk = vim.o.scrollback vim.bo.scrollback = vim.o.scrollback vim.bo.scbk = vim.bo.scrollback --- See also `scroll-binding`. When this option is set, scrolling the --- current window also scrolls other scrollbind windows (windows that --- also have this option set). This option is useful for viewing the --- differences between two versions of a file, see 'diff'. --- See `'scrollopt'` for options that determine how this option should be --- interpreted. --- This option is mostly reset when splitting a window to edit another --- file. This means that ":split | edit file" results in two windows --- with scroll-binding, but ":split file" does not. --- --- @type boolean vim.o.scrollbind = false vim.o.scb = vim.o.scrollbind vim.wo.scrollbind = vim.o.scrollbind vim.wo.scb = vim.wo.scrollbind --- Minimal number of lines to scroll when the cursor gets off the --- screen (e.g., with "j"). Not used for scroll commands (e.g., CTRL-E, --- CTRL-D). Useful if your terminal scrolls very slowly. --- When set to a negative number from -1 to -100 this is used as the --- percentage of the window height. Thus -50 scrolls half the window --- height. --- --- @type integer vim.o.scrolljump = 1 vim.o.sj = vim.o.scrolljump vim.go.scrolljump = vim.o.scrolljump vim.go.sj = vim.go.scrolljump --- Minimal number of screen lines to keep above and below the cursor. --- This will make some context visible around where you are working. If --- you set it to a very large value (999) the cursor line will always be --- in the middle of the window (except at the start or end of the file or --- when long lines wrap). --- After using the local value, go back the global value with one of --- these two: --- --- ```vim --- setlocal scrolloff< --- setlocal scrolloff=-1 --- ``` --- For scrolling horizontally see 'sidescrolloff'. --- --- @type integer vim.o.scrolloff = 0 vim.o.so = vim.o.scrolloff vim.wo.scrolloff = vim.o.scrolloff vim.wo.so = vim.wo.scrolloff vim.go.scrolloff = vim.o.scrolloff vim.go.so = vim.go.scrolloff --- This is a comma-separated list of words that specifies how --- 'scrollbind' windows should behave. 'sbo' stands for ScrollBind --- Options. --- The following words are available: --- ver Bind vertical scrolling for 'scrollbind' windows --- hor Bind horizontal scrolling for 'scrollbind' windows --- jump Applies to the offset between two windows for vertical --- scrolling. This offset is the difference in the first --- displayed line of the bound windows. When moving --- around in a window, another 'scrollbind' window may --- reach a position before the start or after the end of --- the buffer. The offset is not changed though, when --- moving back the 'scrollbind' window will try to scroll --- to the desired position when possible. --- When now making that window the current one, two --- things can be done with the relative offset: --- 1. When "jump" is not included, the relative offset is --- adjusted for the scroll position in the new current --- window. When going back to the other window, the --- new relative offset will be used. --- 2. When "jump" is included, the other windows are --- scrolled to keep the same relative offset. When --- going back to the other window, it still uses the --- same relative offset. --- Also see `scroll-binding`. --- When 'diff' mode is active there always is vertical scroll binding, --- even when "ver" isn't there. --- --- @type string vim.o.scrollopt = "ver,jump" vim.o.sbo = vim.o.scrollopt vim.go.scrollopt = vim.o.scrollopt vim.go.sbo = vim.go.scrollopt --- Specifies the nroff macros that separate sections. These are pairs of --- two letters (See `object-motions`). The default makes a section start --- at the nroff macros ".SH", ".NH", ".H", ".HU", ".nh" and ".sh". --- --- @type string vim.o.sections = "SHNHH HUnhsh" vim.o.sect = vim.o.sections vim.go.sections = vim.o.sections vim.go.sect = vim.go.sections --- This option defines the behavior of the selection. It is only used --- in Visual and Select mode. --- Possible values: --- value past line inclusive ~ --- old no yes --- inclusive yes yes --- exclusive yes no --- "past line" means that the cursor is allowed to be positioned one --- character past the line. --- "inclusive" means that the last character of the selection is included --- in an operation. For example, when "x" is used to delete the --- selection. --- When "old" is used and 'virtualedit' allows the cursor to move past --- the end of line the line break still isn't included. --- Note that when "exclusive" is used and selecting from the end --- backwards, you cannot include the last character of a line, when --- starting in Normal mode and 'virtualedit' empty. --- --- @type string vim.o.selection = "inclusive" vim.o.sel = vim.o.selection vim.go.selection = vim.o.selection vim.go.sel = vim.go.selection --- This is a comma-separated list of words, which specifies when to start --- Select mode instead of Visual mode, when a selection is started. --- Possible values: --- mouse when using the mouse --- key when using shifted special keys --- cmd when using "v", "V" or CTRL-V --- See `Select-mode`. --- --- @type string vim.o.selectmode = "" vim.o.slm = vim.o.selectmode vim.go.selectmode = vim.o.selectmode vim.go.slm = vim.go.selectmode --- Changes the effect of the `:mksession` command. It is a comma- --- separated list of words. Each word enables saving and restoring --- something: --- word save and restore ~ --- blank empty windows --- buffers hidden and unloaded buffers, not just those in windows --- curdir the current directory --- folds manually created folds, opened/closed folds and local --- fold options --- globals global variables that start with an uppercase letter --- and contain at least one lowercase letter. Only --- String and Number types are stored. --- help the help window --- localoptions options and mappings local to a window or buffer (not --- global values for local options) --- options all options and mappings (also global values for local --- options) --- skiprtp exclude 'runtimepath' and 'packpath' from the options --- resize size of the Vim window: 'lines' and 'columns' --- sesdir the directory in which the session file is located --- will become the current directory (useful with --- projects accessed over a network from different --- systems) --- tabpages all tab pages; without this only the current tab page --- is restored, so that you can make a session for each --- tab page separately --- terminal include terminal windows where the command can be --- restored --- winpos position of the whole Vim window --- winsize window sizes --- slash `deprecated` Always enabled. Uses "/" in filenames. --- unix `deprecated` Always enabled. Uses "\n" line endings. --- --- Don't include both "curdir" and "sesdir". When neither is included --- filenames are stored as absolute paths. --- If you leave out "options" many things won't work well after restoring --- the session. --- --- @type string vim.o.sessionoptions = "blank,buffers,curdir,folds,help,tabpages,winsize,terminal" vim.o.ssop = vim.o.sessionoptions vim.go.sessionoptions = vim.o.sessionoptions vim.go.ssop = vim.go.sessionoptions --- When non-empty, the shada file is read upon startup and written --- when exiting Vim (see `shada-file`). The string should be a comma- --- separated list of parameters, each consisting of a single character --- identifying the particular parameter, followed by a number or string --- which specifies the value of that parameter. If a particular --- character is left out, then the default value is used for that --- parameter. The following is a list of the identifying characters and --- the effect of their value. --- CHAR VALUE ~ --- *shada-!* --- ! When included, save and restore global variables that start --- with an uppercase letter, and don't contain a lowercase --- letter. Thus "KEEPTHIS and "K_L_M" are stored, but "KeepThis" --- and "_K_L_M" are not. Nested List and Dict items may not be --- read back correctly, you end up with an empty item. --- *shada-quote* --- " Maximum number of lines saved for each register. Old name of --- the '<' item, with the disadvantage that you need to put a --- backslash before the ", otherwise it will be recognized as the --- start of a comment! --- *shada-%* --- % When included, save and restore the buffer list. If Vim is --- started with a file name argument, the buffer list is not --- restored. If Vim is started without a file name argument, the --- buffer list is restored from the shada file. Quickfix --- ('buftype'), unlisted ('buflisted'), unnamed and buffers on --- removable media (`shada-r`) are not saved. --- When followed by a number, the number specifies the maximum --- number of buffers that are stored. Without a number all --- buffers are stored. --- *shada-'* --- ' Maximum number of previously edited files for which the marks --- are remembered. This parameter must always be included when --- 'shada' is non-empty. --- Including this item also means that the `jumplist` and the --- `changelist` are stored in the shada file. --- *shada-/* --- / Maximum number of items in the search pattern history to be --- saved. If non-zero, then the previous search and substitute --- patterns are also saved. When not included, the value of --- 'history' is used. --- *shada-:* --- : Maximum number of items in the command-line history to be --- saved. When not included, the value of 'history' is used. --- *shada-<* --- \< Maximum number of lines saved for each register. If zero then --- registers are not saved. When not included, all lines are --- saved. '"' is the old name for this item. --- Also see the 's' item below: limit specified in KiB. --- *shada-@* --- @ Maximum number of items in the input-line history to be --- saved. When not included, the value of 'history' is used. --- *shada-c* --- c Dummy option, kept for compatibility reasons. Has no actual --- effect: ShaDa always uses UTF-8 and 'encoding' value is fixed --- to UTF-8 as well. --- *shada-f* --- f Whether file marks need to be stored. If zero, file marks ('0 --- to '9, 'A to 'Z) are not stored. When not present or when --- non-zero, they are all stored. '0 is used for the current --- cursor position (when exiting or when doing `:wshada`). --- *shada-h* --- h Disable the effect of 'hlsearch' when loading the shada --- file. When not included, it depends on whether ":nohlsearch" --- has been used since the last search command. --- *shada-n* --- n Name of the shada file. The name must immediately follow --- the 'n'. Must be at the end of the option! If the --- 'shadafile' option is set, that file name overrides the one --- given here with 'shada'. Environment variables are --- expanded when opening the file, not when setting the option. --- *shada-r* --- r Removable media. The argument is a string (up to the next --- ','). This parameter can be given several times. Each --- specifies the start of a path for which no marks will be --- stored. This is to avoid removable media. For Windows you --- could use "ra:,rb:". You can also use it for temp files, --- e.g., for Unix: "r/tmp". Case is ignored. --- *shada-s* --- s Maximum size of an item contents in KiB. If zero then nothing --- is saved. Unlike Vim this applies to all items, except for --- the buffer list and header. Full item size is off by three --- unsigned integers: with `s10` maximum item size may be 1 byte --- (type: 7-bit integer) + 9 bytes (timestamp: up to 64-bit --- integer) + 3 bytes (item size: up to 16-bit integer because --- 2^8 < 10240 < 2^16) + 10240 bytes (requested maximum item --- contents size) = 10253 bytes. --- --- Example: --- --- ```vim --- set shada='50,<1000,s100,:0,n~/nvim/shada --- ``` --- --- '50 Marks will be remembered for the last 50 files you --- edited. --- <1000 Contents of registers (up to 1000 lines each) will be --- remembered. --- s100 Items with contents occupying more then 100 KiB are --- skipped. --- :0 Command-line history will not be saved. --- n~/nvim/shada The name of the file to use is "~/nvim/shada". --- no / Since '/' is not specified, the default will be used, --- that is, save all of the search history, and also the --- previous search and substitute patterns. --- no % The buffer list will not be saved nor read back. --- no h 'hlsearch' highlighting will be restored. --- --- When setting 'shada' from an empty value you can use `:rshada` to --- load the contents of the file, this is not done automatically. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shada = "!,'100,<50,s10,h" vim.o.sd = vim.o.shada vim.go.shada = vim.o.shada vim.go.sd = vim.go.shada --- When non-empty, overrides the file name used for `shada` (viminfo). --- When equal to "NONE" no shada file will be read or written. --- This option can be set with the `-i` command line flag. The `--clean` --- command line flag sets it to "NONE". --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shadafile = "" vim.o.sdf = vim.o.shadafile vim.go.shadafile = vim.o.shadafile vim.go.sdf = vim.go.shadafile --- Name of the shell to use for ! and :! commands. When changing the --- value also check these options: 'shellpipe', 'shellslash' --- 'shellredir', 'shellquote', 'shellxquote' and 'shellcmdflag'. --- It is allowed to give an argument to the command, e.g. "csh -f". --- See `option-backslash` about including spaces and backslashes. --- Environment variables are expanded `:set_env`. --- --- If the name of the shell contains a space, you need to enclose it in --- quotes. Example with quotes: --- --- ```vim --- set shell=\"c:\program\ files\unix\sh.exe\"\ -f --- ``` --- Note the backslash before each quote (to avoid starting a comment) and --- each space (to avoid ending the option value), so better use `:let-&` --- like this: --- --- ```vim --- let &shell='"C:\Program Files\unix\sh.exe" -f' --- ``` --- Also note that the "-f" is not inside the quotes, because it is not --- part of the command name. --- *shell-unquoting* --- Rules regarding quotes: --- 1. Option is split on space and tab characters that are not inside --- quotes: "abc def" runs shell named "abc" with additional argument --- "def", '"abc def"' runs shell named "abc def" with no additional --- arguments (here and below: additional means “additional to --- 'shellcmdflag'”). --- 2. Quotes in option may be present in any position and any number: --- '"abc"', '"a"bc', 'a"b"c', 'ab"c"' and '"a"b"c"' are all equivalent --- to just "abc". --- 3. Inside quotes backslash preceding backslash means one backslash. --- Backslash preceding quote means one quote. Backslash preceding --- anything else means backslash and next character literally: --- '"a\\b"' is the same as "a\b", '"a\\"b"' runs shell named literally --- 'a"b', '"a\b"' is the same as "a\b" again. --- 4. Outside of quotes backslash always means itself, it cannot be used --- to escape quote: 'a\"b"' is the same as "a\b". --- Note that such processing is done after `:set` did its own round of --- unescaping, so to keep yourself sane use `:let-&` like shown above. --- *shell-powershell* --- To use PowerShell: --- --- ```vim --- let &shell = executable('pwsh') ? 'pwsh' : 'powershell' --- let &shellcmdflag = '-NoLogo -NonInteractive -ExecutionPolicy RemoteSigned -Command [Console]::InputEncoding=[Console]::OutputEncoding=[System.Text.UTF8Encoding]::new();$PSDefaultParameterValues[''Out-File:Encoding'']=''utf8'';$PSStyle.OutputRendering=''plaintext'';Remove-Alias -Force -ErrorAction SilentlyContinue tee;' --- let &shellredir = '2>&1 | %%{ "$_" } | Out-File %s; exit $LastExitCode' --- let &shellpipe = '2>&1 | %%{ "$_" } | tee %s; exit $LastExitCode' --- set shellquote= shellxquote= --- ``` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shell = "sh" vim.o.sh = vim.o.shell vim.go.shell = vim.o.shell vim.go.sh = vim.go.shell --- Flag passed to the shell to execute "!" and ":!" commands; e.g., --- `bash.exe -c ls` or `cmd.exe /s /c "dir"`. For MS-Windows, the --- default is set according to the value of 'shell', to reduce the need --- to set this option by the user. --- On Unix it can have more than one flag. Each white space separated --- part is passed as an argument to the shell command. --- See `option-backslash` about including spaces and backslashes. --- See `shell-unquoting` which talks about separating this option into --- multiple arguments. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shellcmdflag = "-c" vim.o.shcf = vim.o.shellcmdflag vim.go.shellcmdflag = vim.o.shellcmdflag vim.go.shcf = vim.go.shellcmdflag --- String to be used to put the output of the ":make" command in the --- error file. See also `:make_makeprg`. See `option-backslash` about --- including spaces and backslashes. --- The name of the temporary file can be represented by "%s" if necessary --- (the file name is appended automatically if no %s appears in the value --- of this option). --- For MS-Windows the default is "2>&1| tee". The stdout and stderr are --- saved in a file and echoed to the screen. --- For Unix the default is "| tee". The stdout of the compiler is saved --- in a file and echoed to the screen. If the 'shell' option is "csh" or --- "tcsh" after initializations, the default becomes "|& tee". If the --- 'shell' option is "sh", "ksh", "mksh", "pdksh", "zsh", "zsh-beta", --- "bash", "fish", "ash" or "dash" the default becomes "2>&1| tee". This --- means that stderr is also included. Before using the 'shell' option a --- path is removed, thus "/bin/sh" uses "sh". --- The initialization of this option is done after reading the vimrc --- and the other initializations, so that when the 'shell' option is set --- there, the 'shellpipe' option changes automatically, unless it was --- explicitly set before. --- When 'shellpipe' is set to an empty string, no redirection of the --- ":make" output will be done. This is useful if you use a 'makeprg' --- that writes to 'makeef' by itself. If you want no piping, but do --- want to include the 'makeef', set 'shellpipe' to a single space. --- Don't forget to precede the space with a backslash: ":set sp=\ ". --- In the future pipes may be used for filtering and this option will --- become obsolete (at least for Unix). --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shellpipe = "| tee" vim.o.sp = vim.o.shellpipe vim.go.shellpipe = vim.o.shellpipe vim.go.sp = vim.go.shellpipe --- Quoting character(s), put around the command passed to the shell, for --- the "!" and ":!" commands. The redirection is kept outside of the --- quoting. See 'shellxquote' to include the redirection. It's --- probably not useful to set both options. --- This is an empty string by default. Only known to be useful for --- third-party shells on Windows systems, such as the MKS Korn Shell --- or bash, where it should be "\"". The default is adjusted according --- the value of 'shell', to reduce the need to set this option by the --- user. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shellquote = "" vim.o.shq = vim.o.shellquote vim.go.shellquote = vim.o.shellquote vim.go.shq = vim.go.shellquote --- String to be used to put the output of a filter command in a temporary --- file. See also `:!`. See `option-backslash` about including spaces --- and backslashes. --- The name of the temporary file can be represented by "%s" if necessary --- (the file name is appended automatically if no %s appears in the value --- of this option). --- The default is ">". For Unix, if the 'shell' option is "csh" or --- "tcsh" during initializations, the default becomes ">&". If the --- 'shell' option is "sh", "ksh", "mksh", "pdksh", "zsh", "zsh-beta", --- "bash" or "fish", the default becomes ">%s 2>&1". This means that --- stderr is also included. For Win32, the Unix checks are done and --- additionally "cmd" is checked for, which makes the default ">%s 2>&1". --- Also, the same names with ".exe" appended are checked for. --- The initialization of this option is done after reading the vimrc --- and the other initializations, so that when the 'shell' option is set --- there, the 'shellredir' option changes automatically unless it was --- explicitly set before. --- In the future pipes may be used for filtering and this option will --- become obsolete (at least for Unix). --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shellredir = ">" vim.o.srr = vim.o.shellredir vim.go.shellredir = vim.o.shellredir vim.go.srr = vim.go.shellredir --- only modifiable in MS-Windows --- When set, a forward slash is used when expanding file names. This is --- useful when a Unix-like shell is used instead of cmd.exe. Backward --- slashes can still be typed, but they are changed to forward slashes by --- Vim. --- Note that setting or resetting this option has no effect for some --- existing file names, thus this option needs to be set before opening --- any file for best results. This might change in the future. --- 'shellslash' only works when a backslash can be used as a path --- separator. To test if this is so use: --- --- ```vim --- if exists('+shellslash') --- ``` --- Also see 'completeslash'. --- --- @type boolean vim.o.shellslash = true vim.o.ssl = vim.o.shellslash vim.go.shellslash = vim.o.shellslash vim.go.ssl = vim.go.shellslash --- When on, use temp files for shell commands. When off use a pipe. --- When using a pipe is not possible temp files are used anyway. --- The advantage of using a pipe is that nobody can read the temp file --- and the 'shell' command does not need to support redirection. --- The advantage of using a temp file is that the file type and encoding --- can be detected. --- The `FilterReadPre`, `FilterReadPost` and `FilterWritePre|, --- |FilterWritePost` autocommands event are not triggered when --- 'shelltemp' is off. --- `system()` does not respect this option, it always uses pipes. --- --- @type boolean vim.o.shelltemp = true vim.o.stmp = vim.o.shelltemp vim.go.shelltemp = vim.o.shelltemp vim.go.stmp = vim.go.shelltemp --- When 'shellxquote' is set to "(" then the characters listed in this --- option will be escaped with a '^' character. This makes it possible --- to execute most external commands with cmd.exe. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shellxescape = "" vim.o.sxe = vim.o.shellxescape vim.go.shellxescape = vim.o.shellxescape vim.go.sxe = vim.go.shellxescape --- Quoting character(s), put around the command passed to the shell, for --- the "!" and ":!" commands. Includes the redirection. See --- 'shellquote' to exclude the redirection. It's probably not useful --- to set both options. --- When the value is '(' then ')' is appended. When the value is '"(' --- then ')"' is appended. --- When the value is '(' then also see 'shellxescape'. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.shellxquote = "" vim.o.sxq = vim.o.shellxquote vim.go.shellxquote = vim.o.shellxquote vim.go.sxq = vim.go.shellxquote --- Round indent to multiple of 'shiftwidth'. Applies to > and < --- commands. CTRL-T and CTRL-D in Insert mode always round the indent to --- a multiple of 'shiftwidth' (this is Vi compatible). --- --- @type boolean vim.o.shiftround = false vim.o.sr = vim.o.shiftround vim.go.shiftround = vim.o.shiftround vim.go.sr = vim.go.shiftround --- Number of spaces to use for each step of (auto)indent. Used for --- `'cindent'`, `>>`, `<<`, etc. --- When zero the 'tabstop' value will be used. Use the `shiftwidth()` --- function to get the effective shiftwidth value. --- --- @type integer vim.o.shiftwidth = 8 vim.o.sw = vim.o.shiftwidth vim.bo.shiftwidth = vim.o.shiftwidth vim.bo.sw = vim.bo.shiftwidth --- This option helps to avoid all the `hit-enter` prompts caused by file --- messages, for example with CTRL-G, and to avoid some other messages. --- It is a list of flags: --- flag meaning when present ~ --- l use "999L, 888B" instead of "999 lines, 888 bytes" *shm-l* --- m use "[+]" instead of "[Modified]" *shm-m* --- r use "[RO]" instead of "[readonly]" *shm-r* --- w use "[w]" instead of "written" for file write message *shm-w* --- and "[a]" instead of "appended" for ':w >> file' command --- a all of the above abbreviations *shm-a* --- --- o overwrite message for writing a file with subsequent *shm-o* --- message for reading a file (useful for ":wn" or when --- 'autowrite' on) --- O message for reading a file overwrites any previous *shm-O* --- message; also for quickfix message (e.g., ":cn") --- s don't give "search hit BOTTOM, continuing at TOP" or *shm-s* --- "search hit TOP, continuing at BOTTOM" messages; when using --- the search count do not show "W" before the count message --- (see `shm-S` below) --- t truncate file message at the start if it is too long *shm-t* --- to fit on the command-line, "<" will appear in the left most --- column; ignored in Ex mode --- T truncate other messages in the middle if they are too *shm-T* --- long to fit on the command line; "..." will appear in the --- middle; ignored in Ex mode --- W don't give "written" or "[w]" when writing a file *shm-W* --- A don't give the "ATTENTION" message when an existing *shm-A* --- swap file is found --- I don't give the intro message when starting Vim, *shm-I* --- see `:intro` --- c don't give `ins-completion-menu` messages; for *shm-c* --- example, "-- XXX completion (YYY)", "match 1 of 2", "The only --- match", "Pattern not found", "Back at original", etc. --- C don't give messages while scanning for ins-completion *shm-C* --- items, for instance "scanning tags" --- q do not show "recording @a" when recording a macro *shm-q* --- F don't give the file info when editing a file, like *shm-F* --- `:silent` was used for the command; note that this also --- affects messages from 'autoread' reloading --- S do not show search count message when searching, e.g. *shm-S* --- "[1/5]". When the "S" flag is not present (e.g. search count --- is shown), the "search hit BOTTOM, continuing at TOP" and --- "search hit TOP, continuing at BOTTOM" messages are only --- indicated by a "W" (Mnemonic: Wrapped) letter before the --- search count statistics. --- --- This gives you the opportunity to avoid that a change between buffers --- requires you to hit , but still gives as useful a message as --- possible for the space available. To get the whole message that you --- would have got with 'shm' empty, use ":file!" --- Useful values: --- shm= No abbreviation of message. --- shm=a Abbreviation, but no loss of information. --- shm=at Abbreviation, and truncate message when necessary. --- --- @type string vim.o.shortmess = "ltToOCF" vim.o.shm = vim.o.shortmess vim.go.shortmess = vim.o.shortmess vim.go.shm = vim.go.shortmess --- String to put at the start of lines that have been wrapped. Useful --- values are "> " or "+++ ": --- --- ```vim --- let &showbreak = "> " --- let &showbreak = '+++ ' --- ``` --- Only printable single-cell characters are allowed, excluding and --- comma (in a future version the comma might be used to separate the --- part that is shown at the end and at the start of a line). --- The `hl-NonText` highlight group determines the highlighting. --- Note that tabs after the showbreak will be displayed differently. --- If you want the 'showbreak' to appear in between line numbers, add the --- "n" flag to 'cpoptions'. --- A window-local value overrules a global value. If the global value is --- set and you want no value in the current window use NONE: --- --- ```vim --- setlocal showbreak=NONE --- ``` --- --- --- @type string vim.o.showbreak = "" vim.o.sbr = vim.o.showbreak vim.wo.showbreak = vim.o.showbreak vim.wo.sbr = vim.wo.showbreak vim.go.showbreak = vim.o.showbreak vim.go.sbr = vim.go.showbreak --- Show (partial) command in the last line of the screen. Set this --- option off if your terminal is slow. --- In Visual mode the size of the selected area is shown: --- - When selecting characters within a line, the number of characters. --- If the number of bytes is different it is also displayed: "2-6" --- means two characters and six bytes. --- - When selecting more than one line, the number of lines. --- - When selecting a block, the size in screen characters: --- {lines}x{columns}. --- This information can be displayed in an alternative location using the --- 'showcmdloc' option, useful when 'cmdheight' is 0. --- --- @type boolean vim.o.showcmd = true vim.o.sc = vim.o.showcmd vim.go.showcmd = vim.o.showcmd vim.go.sc = vim.go.showcmd --- This option can be used to display the (partially) entered command in --- another location. Possible values are: --- last Last line of the screen (default). --- statusline Status line of the current window. --- tabline First line of the screen if 'showtabline' is enabled. --- Setting this option to "statusline" or "tabline" means that these will --- be redrawn whenever the command changes, which can be on every key --- pressed. --- The %S 'statusline' item can be used in 'statusline' or 'tabline' to --- place the text. Without a custom 'statusline' or 'tabline' it will be --- displayed in a convenient location. --- --- @type string vim.o.showcmdloc = "last" vim.o.sloc = vim.o.showcmdloc vim.go.showcmdloc = vim.o.showcmdloc vim.go.sloc = vim.go.showcmdloc --- When completing a word in insert mode (see `ins-completion`) from the --- tags file, show both the tag name and a tidied-up form of the search --- pattern (if there is one) as possible matches. Thus, if you have --- matched a C function, you can see a template for what arguments are --- required (coding style permitting). --- Note that this doesn't work well together with having "longest" in --- 'completeopt', because the completion from the search pattern may not --- match the typed text. --- --- @type boolean vim.o.showfulltag = false vim.o.sft = vim.o.showfulltag vim.go.showfulltag = vim.o.showfulltag vim.go.sft = vim.go.showfulltag --- When a bracket is inserted, briefly jump to the matching one. The --- jump is only done if the match can be seen on the screen. The time to --- show the match can be set with 'matchtime'. --- A Beep is given if there is no match (no matter if the match can be --- seen or not). --- When the 'm' flag is not included in 'cpoptions', typing a character --- will immediately move the cursor back to where it belongs. --- See the "sm" field in 'guicursor' for setting the cursor shape and --- blinking when showing the match. --- The 'matchpairs' option can be used to specify the characters to show --- matches for. 'rightleft' and 'revins' are used to look for opposite --- matches. --- Also see the matchparen plugin for highlighting the match when moving --- around `pi_paren.txt`. --- Note: Use of the short form is rated PG. --- --- @type boolean vim.o.showmatch = false vim.o.sm = vim.o.showmatch vim.go.showmatch = vim.o.showmatch vim.go.sm = vim.go.showmatch --- If in Insert, Replace or Visual mode put a message on the last line. --- The `hl-ModeMsg` highlight group determines the highlighting. --- The option has no effect when 'cmdheight' is zero. --- --- @type boolean vim.o.showmode = true vim.o.smd = vim.o.showmode vim.go.showmode = vim.o.showmode vim.go.smd = vim.go.showmode --- The value of this option specifies when the line with tab page labels --- will be displayed: --- 0: never --- 1: only if there are at least two tab pages --- 2: always --- This is both for the GUI and non-GUI implementation of the tab pages --- line. --- See `tab-page` for more information about tab pages. --- --- @type integer vim.o.showtabline = 1 vim.o.stal = vim.o.showtabline vim.go.showtabline = vim.o.showtabline vim.go.stal = vim.go.showtabline --- The minimal number of columns to scroll horizontally. Used only when --- the 'wrap' option is off and the cursor is moved off of the screen. --- When it is zero the cursor will be put in the middle of the screen. --- When using a slow terminal set it to a large number or 0. Not used --- for "zh" and "zl" commands. --- --- @type integer vim.o.sidescroll = 1 vim.o.ss = vim.o.sidescroll vim.go.sidescroll = vim.o.sidescroll vim.go.ss = vim.go.sidescroll --- The minimal number of screen columns to keep to the left and to the --- right of the cursor if 'nowrap' is set. Setting this option to a --- value greater than 0 while having `'sidescroll'` also at a non-zero --- value makes some context visible in the line you are scrolling in --- horizontally (except at beginning of the line). Setting this option --- to a large value (like 999) has the effect of keeping the cursor --- horizontally centered in the window, as long as one does not come too --- close to the beginning of the line. --- After using the local value, go back the global value with one of --- these two: --- --- ```vim --- setlocal sidescrolloff< --- setlocal sidescrolloff=-1 --- ``` --- --- Example: Try this together with 'sidescroll' and 'listchars' as --- in the following example to never allow the cursor to move --- onto the "extends" character: --- --- ```vim --- --- set nowrap sidescroll=1 listchars=extends:>,precedes:< --- set sidescrolloff=1 --- ``` --- --- --- @type integer vim.o.sidescrolloff = 0 vim.o.siso = vim.o.sidescrolloff vim.wo.sidescrolloff = vim.o.sidescrolloff vim.wo.siso = vim.wo.sidescrolloff vim.go.sidescrolloff = vim.o.sidescrolloff vim.go.siso = vim.go.sidescrolloff --- When and how to draw the signcolumn. Valid values are: --- "auto" only when there is a sign to display --- "auto:[1-9]" resize to accommodate multiple signs up to the --- given number (maximum 9), e.g. "auto:4" --- "auto:[1-8]-[2-9]" --- resize to accommodate multiple signs up to the --- given maximum number (maximum 9) while keeping --- at least the given minimum (maximum 8) fixed --- space. The minimum number should always be less --- than the maximum number, e.g. "auto:2-5" --- "no" never --- "yes" always --- "yes:[1-9]" always, with fixed space for signs up to the given --- number (maximum 9), e.g. "yes:3" --- "number" display signs in the 'number' column. If the number --- column is not present, then behaves like "auto". --- --- @type string vim.o.signcolumn = "auto" vim.o.scl = vim.o.signcolumn vim.wo.signcolumn = vim.o.signcolumn vim.wo.scl = vim.wo.signcolumn --- Override the 'ignorecase' option if the search pattern contains upper --- case characters. Only used when the search pattern is typed and --- 'ignorecase' option is on. Used for the commands "/", "?", "n", "N", --- ":g" and ":s". Not used for "*", "#", "gd", tag search, etc. After --- "*" and "#" you can make 'smartcase' used by doing a "/" command, --- recalling the search pattern from history and hitting . --- --- @type boolean vim.o.smartcase = false vim.o.scs = vim.o.smartcase vim.go.smartcase = vim.o.smartcase vim.go.scs = vim.go.smartcase --- Do smart autoindenting when starting a new line. Works for C-like --- programs, but can also be used for other languages. 'cindent' does --- something like this, works better in most cases, but is more strict, --- see `C-indenting`. When 'cindent' is on or 'indentexpr' is set, --- setting 'si' has no effect. 'indentexpr' is a more advanced --- alternative. --- Normally 'autoindent' should also be on when using 'smartindent'. --- An indent is automatically inserted: --- - After a line ending in "{". --- - After a line starting with a keyword from 'cinwords'. --- - Before a line starting with "}" (only with the "O" command). --- When typing '}' as the first character in a new line, that line is --- given the same indent as the matching "{". --- When typing '#' as the first character in a new line, the indent for --- that line is removed, the '#' is put in the first column. The indent --- is restored for the next line. If you don't want this, use this --- mapping: ":inoremap # X^H#", where ^H is entered with CTRL-V CTRL-H. --- When using the ">>" command, lines starting with '#' are not shifted --- right. --- --- @type boolean vim.o.smartindent = false vim.o.si = vim.o.smartindent vim.bo.smartindent = vim.o.smartindent vim.bo.si = vim.bo.smartindent --- When on, a in front of a line inserts blanks according to --- 'shiftwidth'. 'tabstop' or 'softtabstop' is used in other places. A --- will delete a 'shiftwidth' worth of space at the start of the --- line. --- When off, a always inserts blanks according to 'tabstop' or --- 'softtabstop'. 'shiftwidth' is only used for shifting text left or --- right `shift-left-right`. --- What gets inserted (a or spaces) depends on the 'expandtab' --- option. Also see `ins-expandtab`. When 'expandtab' is not set, the --- number of spaces is minimized by using s. --- --- @type boolean vim.o.smarttab = true vim.o.sta = vim.o.smarttab vim.go.smarttab = vim.o.smarttab vim.go.sta = vim.go.smarttab --- Scrolling works with screen lines. When 'wrap' is set and the first --- line in the window wraps part of it may not be visible, as if it is --- above the window. "<<<" is displayed at the start of the first line, --- highlighted with `hl-NonText`. --- You may also want to add "lastline" to the 'display' option to show as --- much of the last line as possible. --- NOTE: partly implemented, doesn't work yet for `gj` and `gk`. --- --- @type boolean vim.o.smoothscroll = false vim.o.sms = vim.o.smoothscroll vim.wo.smoothscroll = vim.o.smoothscroll vim.wo.sms = vim.wo.smoothscroll --- Number of spaces that a counts for while performing editing --- operations, like inserting a or using . It "feels" like --- s are being inserted, while in fact a mix of spaces and s is --- used. This is useful to keep the 'ts' setting at its standard value --- of 8, while being able to edit like it is set to 'sts'. However, --- commands like "x" still work on the actual characters. --- When 'sts' is zero, this feature is off. --- When 'sts' is negative, the value of 'shiftwidth' is used. --- See also `ins-expandtab`. When 'expandtab' is not set, the number of --- spaces is minimized by using s. --- The 'L' flag in 'cpoptions' changes how tabs are used when 'list' is --- set. --- --- The value of 'softtabstop' will be ignored if `'varsofttabstop'` is set --- to anything other than an empty string. --- --- @type integer vim.o.softtabstop = 0 vim.o.sts = vim.o.softtabstop vim.bo.softtabstop = vim.o.softtabstop vim.bo.sts = vim.bo.softtabstop --- When on spell checking will be done. See `spell`. --- The languages are specified with 'spelllang'. --- --- @type boolean vim.o.spell = false vim.wo.spell = vim.o.spell --- Pattern to locate the end of a sentence. The following word will be --- checked to start with a capital letter. If not then it is highlighted --- with SpellCap `hl-SpellCap` (unless the word is also badly spelled). --- When this check is not wanted make this option empty. --- Only used when 'spell' is set. --- Be careful with special characters, see `option-backslash` about --- including spaces and backslashes. --- To set this option automatically depending on the language, see --- `set-spc-auto`. --- --- @type string vim.o.spellcapcheck = "[.?!]\\_[\\])'\"\\t ]\\+" vim.o.spc = vim.o.spellcapcheck vim.bo.spellcapcheck = vim.o.spellcapcheck vim.bo.spc = vim.bo.spellcapcheck --- Name of the word list file where words are added for the `zg` and `zw` --- commands. It must end in ".{encoding}.add". You need to include the --- path, otherwise the file is placed in the current directory. --- The path may include characters from 'isfname', ' ', ',', '@' and ':'. --- *E765* --- It may also be a comma-separated list of names. A count before the --- `zg` and `zw` commands can be used to access each. This allows using --- a personal word list file and a project word list file. --- When a word is added while this option is empty Vim will set it for --- you: Using the first directory in 'runtimepath' that is writable. If --- there is no "spell" directory yet it will be created. For the file --- name the first language name that appears in 'spelllang' is used, --- ignoring the region. --- The resulting ".spl" file will be used for spell checking, it does not --- have to appear in 'spelllang'. --- Normally one file is used for all regions, but you can add the region --- name if you want to. However, it will then only be used when --- 'spellfile' is set to it, for entries in 'spelllang' only files --- without region name will be found. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.spellfile = "" vim.o.spf = vim.o.spellfile vim.bo.spellfile = vim.o.spellfile vim.bo.spf = vim.bo.spellfile --- A comma-separated list of word list names. When the 'spell' option is --- on spellchecking will be done for these languages. Example: --- --- ```vim --- set spelllang=en_us,nl,medical --- ``` --- This means US English, Dutch and medical words are recognized. Words --- that are not recognized will be highlighted. --- The word list name must consist of alphanumeric characters, a dash or --- an underscore. It should not include a comma or dot. Using a dash is --- recommended to separate the two letter language name from a --- specification. Thus "en-rare" is used for rare English words. --- A region name must come last and have the form "_xx", where "xx" is --- the two-letter, lower case region name. You can use more than one --- region by listing them: "en_us,en_ca" supports both US and Canadian --- English, but not words specific for Australia, New Zealand or Great --- Britain. (Note: currently en_au and en_nz dictionaries are older than --- en_ca, en_gb and en_us). --- If the name "cjk" is included East Asian characters are excluded from --- spell checking. This is useful when editing text that also has Asian --- words. --- Note that the "medical" dictionary does not exist, it is just an --- example of a longer name. --- *E757* --- As a special case the name of a .spl file can be given as-is. The --- first "_xx" in the name is removed and used as the region name --- (_xx is an underscore, two letters and followed by a non-letter). --- This is mainly for testing purposes. You must make sure the correct --- encoding is used, Vim doesn't check it. --- How the related spell files are found is explained here: `spell-load`. --- --- If the `spellfile.vim` plugin is active and you use a language name --- for which Vim cannot find the .spl file in 'runtimepath' the plugin --- will ask you if you want to download the file. --- --- After this option has been set successfully, Vim will source the files --- "spell/LANG.vim" in 'runtimepath'. "LANG" is the value of 'spelllang' --- up to the first character that is not an ASCII letter or number and --- not a dash. Also see `set-spc-auto`. --- --- @type string vim.o.spelllang = "en" vim.o.spl = vim.o.spelllang vim.bo.spelllang = vim.o.spelllang vim.bo.spl = vim.bo.spelllang --- A comma-separated list of options for spell checking: --- camel When a word is CamelCased, assume "Cased" is a --- separate word: every upper-case character in a word --- that comes after a lower case character indicates the --- start of a new word. --- noplainbuffer Only spellcheck a buffer when 'syntax' is enabled, --- or when extmarks are set within the buffer. Only --- designated regions of the buffer are spellchecked in --- this case. --- --- @type string vim.o.spelloptions = "" vim.o.spo = vim.o.spelloptions vim.bo.spelloptions = vim.o.spelloptions vim.bo.spo = vim.bo.spelloptions --- Methods used for spelling suggestions. Both for the `z=` command and --- the `spellsuggest()` function. This is a comma-separated list of --- items: --- --- best Internal method that works best for English. Finds --- changes like "fast" and uses a bit of sound-a-like --- scoring to improve the ordering. --- --- double Internal method that uses two methods and mixes the --- results. The first method is "fast", the other method --- computes how much the suggestion sounds like the bad --- word. That only works when the language specifies --- sound folding. Can be slow and doesn't always give --- better results. --- --- fast Internal method that only checks for simple changes: --- character inserts/deletes/swaps. Works well for --- simple typing mistakes. --- --- {number} The maximum number of suggestions listed for `z=`. --- Not used for `spellsuggest()`. The number of --- suggestions is never more than the value of 'lines' --- minus two. --- --- timeout:{millisec} Limit the time searching for suggestions to --- {millisec} milliseconds. Applies to the following --- methods. When omitted the limit is 5000. When --- negative there is no limit. --- --- file:{filename} Read file {filename}, which must have two columns, --- separated by a slash. The first column contains the --- bad word, the second column the suggested good word. --- Example: --- theribal/terrible ~ --- Use this for common mistakes that do not appear at the --- top of the suggestion list with the internal methods. --- Lines without a slash are ignored, use this for --- comments. --- The word in the second column must be correct, --- otherwise it will not be used. Add the word to an --- ".add" file if it is currently flagged as a spelling --- mistake. --- The file is used for all languages. --- --- expr:{expr} Evaluate expression {expr}. Use a function to avoid --- trouble with spaces. Best is to call a function --- without arguments, see `expr-option-function|. --- |v:val` holds the badly spelled word. The expression --- must evaluate to a List of Lists, each with a --- suggestion and a score. --- Example: --- [['the', 33], ['that', 44]] ~ --- Set 'verbose' and use `z=` to see the scores that the --- internal methods use. A lower score is better. --- This may invoke `spellsuggest()` if you temporarily --- set 'spellsuggest' to exclude the "expr:" part. --- Errors are silently ignored, unless you set the --- 'verbose' option to a non-zero value. --- --- Only one of "best", "double" or "fast" may be used. The others may --- appear several times in any order. Example: --- --- ```vim --- set sps=file:~/.config/nvim/sugg,best,expr:MySuggest() --- ``` --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.spellsuggest = "best" vim.o.sps = vim.o.spellsuggest vim.go.spellsuggest = vim.o.spellsuggest vim.go.sps = vim.go.spellsuggest --- When on, splitting a window will put the new window below the current --- one. `:split` --- --- @type boolean vim.o.splitbelow = false vim.o.sb = vim.o.splitbelow vim.go.splitbelow = vim.o.splitbelow vim.go.sb = vim.go.splitbelow --- The value of this option determines the scroll behavior when opening, --- closing or resizing horizontal splits. --- --- Possible values are: --- cursor Keep the same relative cursor position. --- screen Keep the text on the same screen line. --- topline Keep the topline the same. --- --- For the "screen" and "topline" values, the cursor position will be --- changed when necessary. In this case, the jumplist will be populated --- with the previous cursor position. For "screen", the text cannot always --- be kept on the same screen line when 'wrap' is enabled. --- --- @type string vim.o.splitkeep = "cursor" vim.o.spk = vim.o.splitkeep vim.go.splitkeep = vim.o.splitkeep vim.go.spk = vim.go.splitkeep --- When on, splitting a window will put the new window right of the --- current one. `:vsplit` --- --- @type boolean vim.o.splitright = false vim.o.spr = vim.o.splitright vim.go.splitright = vim.o.splitright vim.go.spr = vim.go.splitright --- When "on" the commands listed below move the cursor to the first --- non-blank of the line. When off the cursor is kept in the same column --- (if possible). This applies to the commands: --- - CTRL-D, CTRL-U, CTRL-B, CTRL-F, "G", "H", "M", "L", "gg" --- - "d", "<<", "==" and ">>" with a linewise operator --- (`operator-resulting-pos`) --- - "%" with a count --- - buffer changing commands (CTRL-^, :bnext, :bNext, etc.) --- - Ex commands that only have a line number, e.g., ":25" or ":+". --- In case of buffer changing commands the cursor is placed at the column --- where it was the last time the buffer was edited. --- --- @type boolean vim.o.startofline = false vim.o.sol = vim.o.startofline vim.go.startofline = vim.o.startofline vim.go.sol = vim.go.startofline --- When non-empty, this option determines the content of the area to the --- side of a window, normally containing the fold, sign and number columns. --- The format of this option is like that of 'statusline'. --- --- Some of the items from the 'statusline' format are different for --- 'statuscolumn': --- --- %l line number column for currently drawn line --- %s sign column for currently drawn line --- %C fold column for currently drawn line --- --- The 'statuscolumn' width follows that of the default columns and --- adapts to the `'numberwidth'`, `'signcolumn'` and `'foldcolumn'` option --- values (regardless of whether the sign and fold items are present). --- Additionally, the 'statuscolumn' grows with the size of the evaluated --- format string, up to a point (following the maximum size of the default --- fold, sign and number columns). Shrinking only happens when the number --- of lines in a buffer changes, or the 'statuscolumn' option is set. --- --- The `v:lnum` variable holds the line number to be drawn. --- The `v:relnum` variable holds the relative line number to be drawn. --- The `v:virtnum` variable is negative when drawing virtual lines, zero --- when drawing the actual buffer line, and positive when --- drawing the wrapped part of a buffer line. --- --- When using `v:relnum`, keep in mind that cursor movement by itself will --- not cause the 'statuscolumn' to update unless `'relativenumber'` is set. --- --- NOTE: The %@ click execute function item is supported as well but the --- specified function will be the same for each row in the same column. --- It cannot be switched out through a dynamic 'statuscolumn' format, the --- handler should be written with this in mind. --- --- Examples: --- --- ```vim --- " Line number with bar separator and click handlers: --- set statuscolumn=%@SignCb@%s%=%T%@NumCb@%l│%T --- --- " Line numbers in hexadecimal for non wrapped part of lines: --- let &stc='%=%{v:virtnum>0?"":printf("%x",v:lnum)} ' --- --- " Human readable line numbers with thousands separator: --- let &stc='%{substitute(v:lnum,"\\d\\zs\\ze\\' --- . '%(\\d\\d\\d\\)\\+$",",","g")}' --- --- " Both relative and absolute line numbers with different --- " highlighting for odd and even relative numbers: --- let &stc='%#NonText#%{&nu?v:lnum:""}' . --- '%=%{&rnu&&(v:lnum%2)?"\ ".v:relnum:""}' . --- '%#LineNr#%{&rnu&&!(v:lnum%2)?"\ ".v:relnum:""}' --- ``` --- WARNING: this expression is evaluated for each screen line so defining --- an expensive expression can negatively affect render performance. --- --- @type string vim.o.statuscolumn = "" vim.o.stc = vim.o.statuscolumn vim.wo.statuscolumn = vim.o.statuscolumn vim.wo.stc = vim.wo.statuscolumn --- When non-empty, this option determines the content of the status line. --- Also see `status-line`. --- --- The option consists of printf style '%' items interspersed with --- normal text. Each status line item is of the form: --- %-0{minwid}.{maxwid}{item} --- All fields except the {item} are optional. A single percent sign can --- be given as "%%". --- --- When the option starts with "%!" then it is used as an expression, --- evaluated and the result is used as the option value. Example: --- --- ```vim --- set statusline=%!MyStatusLine() --- ``` --- The *g:statusline_winid* variable will be set to the `window-ID` of the --- window that the status line belongs to. --- The result can contain %{} items that will be evaluated too. --- Note that the "%!" expression is evaluated in the context of the --- current window and buffer, while %{} items are evaluated in the --- context of the window that the statusline belongs to. --- --- When there is error while evaluating the option then it will be made --- empty to avoid further errors. Otherwise screen updating would loop. --- When the result contains unprintable characters the result is --- unpredictable. --- --- Note that the only effect of 'ruler' when this option is set (and --- 'laststatus' is 2 or 3) is controlling the output of `CTRL-G`. --- --- field meaning ~ --- - Left justify the item. The default is right justified --- when minwid is larger than the length of the item. --- 0 Leading zeroes in numeric items. Overridden by "-". --- minwid Minimum width of the item, padding as set by "-" & "0". --- Value must be 50 or less. --- maxwid Maximum width of the item. Truncation occurs with a "<" --- on the left for text items. Numeric items will be --- shifted down to maxwid-2 digits followed by ">"number --- where number is the amount of missing digits, much like --- an exponential notation. --- item A one letter code as described below. --- --- Following is a description of the possible statusline items. The --- second character in "item" is the type: --- N for number --- S for string --- F for flags as described below --- - not applicable --- --- item meaning ~ --- f S Path to the file in the buffer, as typed or relative to current --- directory. --- F S Full path to the file in the buffer. --- t S File name (tail) of file in the buffer. --- m F Modified flag, text is "[+]"; "[-]" if 'modifiable' is off. --- M F Modified flag, text is ",+" or ",-". --- r F Readonly flag, text is "[RO]". --- R F Readonly flag, text is ",RO". --- h F Help buffer flag, text is "[help]". --- H F Help buffer flag, text is ",HLP". --- w F Preview window flag, text is "[Preview]". --- W F Preview window flag, text is ",PRV". --- y F Type of file in the buffer, e.g., "[vim]". See 'filetype'. --- Y F Type of file in the buffer, e.g., ",VIM". See 'filetype'. --- q S "[Quickfix List]", "[Location List]" or empty. --- k S Value of "b:keymap_name" or 'keymap' when `:lmap` mappings are --- being used: "" --- n N Buffer number. --- b N Value of character under cursor. --- B N As above, in hexadecimal. --- o N Byte number in file of byte under cursor, first byte is 1. --- Mnemonic: Offset from start of file (with one added) --- O N As above, in hexadecimal. --- l N Line number. --- L N Number of lines in buffer. --- c N Column number (byte index). --- v N Virtual column number (screen column). --- V N Virtual column number as -{num}. Not displayed if equal to 'c'. --- p N Percentage through file in lines as in `CTRL-G`. --- P S Percentage through file of displayed window. This is like the --- percentage described for 'ruler'. Always 3 in length, unless --- translated. --- S S 'showcmd' content, see 'showcmdloc'. --- a S Argument list status as in default title. ({current} of {max}) --- Empty if the argument file count is zero or one. --- { NF Evaluate expression between "%{" and "}" and substitute result. --- Note that there is no "%" before the closing "}". The --- expression cannot contain a "}" character, call a function to --- work around that. See `stl-%{` below. --- `{%` - This is almost same as "{" except the result of the expression is --- re-evaluated as a statusline format string. Thus if the --- return value of expr contains "%" items they will get expanded. --- The expression can contain the "}" character, the end of --- expression is denoted by "%}". --- For example: --- --- ```vim --- func! Stl_filename() abort --- return "%t" --- endfunc --- ``` --- `stl=%{Stl_filename()}` results in `"%t"` --- `stl=%{%Stl_filename()%}` results in `"Name of current file"` --- %} - End of "{%" expression --- ( - Start of item group. Can be used for setting the width and --- alignment of a section. Must be followed by %) somewhere. --- ) - End of item group. No width fields allowed. --- T N For 'tabline': start of tab page N label. Use %T or %X to end --- the label. Clicking this label with left mouse button switches --- to the specified tab page, while clicking it with middle mouse --- button closes the specified tab page. --- X N For 'tabline': start of close tab N label. Use %X or %T to end --- the label, e.g.: %3Xclose%X. Use %999X for a "close current --- tab" label. Clicking this label with left mouse button closes --- the specified tab page. --- @ N Start of execute function label. Use %X or %T to end the label, --- e.g.: %10@SwitchBuffer@foo.c%X. Clicking this label runs the --- specified function: in the example when clicking once using left --- mouse button on "foo.c", a `SwitchBuffer(10, 1, 'l', ' ')` --- expression will be run. The specified function receives the --- following arguments in order: --- 1. minwid field value or zero if no N was specified --- 2. number of mouse clicks to detect multiple clicks --- 3. mouse button used: "l", "r" or "m" for left, right or middle --- button respectively; one should not rely on third argument --- being only "l", "r" or "m": any other non-empty string value --- that contains only ASCII lower case letters may be expected --- for other mouse buttons --- 4. modifiers pressed: string which contains "s" if shift --- modifier was pressed, "c" for control, "a" for alt and "m" --- for meta; currently if modifier is not pressed string --- contains space instead, but one should not rely on presence --- of spaces or specific order of modifiers: use `stridx()` to --- test whether some modifier is present; string is guaranteed --- to contain only ASCII letters and spaces, one letter per --- modifier; "?" modifier may also be present, but its presence --- is a bug that denotes that new mouse button recognition was --- added without modifying code that reacts on mouse clicks on --- this label. --- Use `getmousepos()`.winid in the specified function to get the --- corresponding window id of the clicked item. --- \< - Where to truncate line if too long. Default is at the start. --- No width fields allowed. --- = - Separation point between alignment sections. Each section will --- be separated by an equal number of spaces. With one %= what --- comes after it will be right-aligned. With two %= there is a --- middle part, with white space left and right of it. --- No width fields allowed. --- # - Set highlight group. The name must follow and then a # again. --- Thus use %#HLname# for highlight group HLname. The same --- highlighting is used, also for the statusline of non-current --- windows. --- * - Set highlight group to User{N}, where {N} is taken from the --- minwid field, e.g. %1*. Restore normal highlight with %* or %0*. --- The difference between User{N} and StatusLine will be applied to --- StatusLineNC for the statusline of non-current windows. --- The number N must be between 1 and 9. See `hl-User1..9` --- --- When displaying a flag, Vim removes the leading comma, if any, when --- that flag comes right after plaintext. This will make a nice display --- when flags are used like in the examples below. --- --- When all items in a group becomes an empty string (i.e. flags that are --- not set) and a minwid is not set for the group, the whole group will --- become empty. This will make a group like the following disappear --- completely from the statusline when none of the flags are set. --- --- ```vim --- set statusline=...%(\ [%M%R%H]%)... --- ``` --- Beware that an expression is evaluated each and every time the status --- line is displayed. --- *stl-%{* *g:actual_curbuf* *g:actual_curwin* --- While evaluating %{} the current buffer and current window will be set --- temporarily to that of the window (and buffer) whose statusline is --- currently being drawn. The expression will evaluate in this context. --- The variable "g:actual_curbuf" is set to the `bufnr()` number of the --- real current buffer and "g:actual_curwin" to the `window-ID` of the --- real current window. These values are strings. --- --- The 'statusline' option will be evaluated in the `sandbox` if set from --- a modeline, see `sandbox-option`. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- It is not allowed to change text or jump to another window while --- evaluating 'statusline' `textlock`. --- --- If the statusline is not updated when you want it (e.g., after setting --- a variable that's used in an expression), you can force an update by --- using `:redrawstatus`. --- --- A result of all digits is regarded a number for display purposes. --- Otherwise the result is taken as flag text and applied to the rules --- described above. --- --- Watch out for errors in expressions. They may render Vim unusable! --- If you are stuck, hold down ':' or 'Q' to get a prompt, then quit and --- edit your vimrc or whatever with "vim --clean" to get it right. --- --- Examples: --- Emulate standard status line with 'ruler' set --- --- ```vim --- set statusline=%<%f\ %h%w%m%r%=%-14.(%l,%c%V%)\ %P --- ``` --- Similar, but add ASCII value of char under the cursor (like "ga") --- --- ```vim --- set statusline=%<%f%h%m%r%=%b\ 0x%B\ \ %l,%c%V\ %P --- ``` --- Display byte count and byte value, modified flag in red. --- --- ```vim --- set statusline=%<%f%=\ [%1*%M%*%n%R%H]\ %-19(%3l,%02c%03V%)%O'%02b' --- hi User1 term=inverse,bold cterm=inverse,bold ctermfg=red --- ``` --- Display a ,GZ flag if a compressed file is loaded --- --- ```vim --- set statusline=...%r%{VarExists('b:gzflag','\ [GZ]')}%h... --- ``` --- In the `:autocmd`'s: --- --- ```vim --- let b:gzflag = 1 --- ``` --- And: --- --- ```vim --- unlet b:gzflag --- ``` --- And define this function: --- --- ```vim --- function VarExists(var, val) --- if exists(a:var) | return a:val | else | return '' | endif --- endfunction --- ``` --- --- --- @type string vim.o.statusline = "" vim.o.stl = vim.o.statusline vim.wo.statusline = vim.o.statusline vim.wo.stl = vim.wo.statusline vim.go.statusline = vim.o.statusline vim.go.stl = vim.go.statusline --- Files with these suffixes get a lower priority when multiple files --- match a wildcard. See `suffixes`. Commas can be used to separate the --- suffixes. Spaces after the comma are ignored. A dot is also seen as --- the start of a suffix. To avoid a dot or comma being recognized as a --- separator, precede it with a backslash (see `option-backslash` about --- including spaces and backslashes). --- See 'wildignore' for completely ignoring files. --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- suffixes from the list. This avoids problems when a future version --- uses another default. --- --- @type string vim.o.suffixes = ".bak,~,.o,.h,.info,.swp,.obj" vim.o.su = vim.o.suffixes vim.go.suffixes = vim.o.suffixes vim.go.su = vim.go.suffixes --- Comma-separated list of suffixes, which are used when searching for a --- file for the "gf", "[I", etc. commands. Example: --- --- ```vim --- set suffixesadd=.java --- ``` --- --- --- @type string vim.o.suffixesadd = "" vim.o.sua = vim.o.suffixesadd vim.bo.suffixesadd = vim.o.suffixesadd vim.bo.sua = vim.bo.suffixesadd --- Use a swapfile for the buffer. This option can be reset when a --- swapfile is not wanted for a specific buffer. For example, with --- confidential information that even root must not be able to access. --- Careful: All text will be in memory: --- - Don't use this for big files. --- - Recovery will be impossible! --- A swapfile will only be present when `'updatecount'` is non-zero and --- 'swapfile' is set. --- When 'swapfile' is reset, the swap file for the current buffer is --- immediately deleted. When 'swapfile' is set, and 'updatecount' is --- non-zero, a swap file is immediately created. --- Also see `swap-file`. --- If you want to open a new buffer without creating a swap file for it, --- use the `:noswapfile` modifier. --- See 'directory' for where the swap file is created. --- --- This option is used together with 'bufhidden' and 'buftype' to --- specify special kinds of buffers. See `special-buffers`. --- --- @type boolean vim.o.swapfile = true vim.o.swf = vim.o.swapfile vim.bo.swapfile = vim.o.swapfile vim.bo.swf = vim.bo.swapfile --- This option controls the behavior when switching between buffers. --- This option is checked, when --- - jumping to errors with the `quickfix` commands (`:cc`, `:cn`, `:cp`, --- etc.). --- - jumping to a tag using the `:stag` command. --- - opening a file using the `CTRL-W_f` or `CTRL-W_F` command. --- - jumping to a buffer using a buffer split command (e.g. `:sbuffer`, --- `:sbnext`, or `:sbrewind`). --- Possible values (comma-separated list): --- useopen If included, jump to the first open window in the --- current tab page that contains the specified buffer --- (if there is one). Otherwise: Do not examine other --- windows. --- usetab Like "useopen", but also consider windows in other tab --- pages. --- split If included, split the current window before loading --- a buffer for a `quickfix` command that display errors. --- Otherwise: do not split, use current window (when used --- in the quickfix window: the previously used window or --- split if there is no other window). --- vsplit Just like "split" but split vertically. --- newtab Like "split", but open a new tab page. Overrules --- "split" when both are present. --- uselast If included, jump to the previously used window when --- jumping to errors with `quickfix` commands. --- If a window has 'winfixbuf' enabled, 'switchbuf' is currently not --- applied to the split window. --- --- @type string vim.o.switchbuf = "uselast" vim.o.swb = vim.o.switchbuf vim.go.switchbuf = vim.o.switchbuf vim.go.swb = vim.go.switchbuf --- Maximum column in which to search for syntax items. In long lines the --- text after this column is not highlighted and following lines may not --- be highlighted correctly, because the syntax state is cleared. --- This helps to avoid very slow redrawing for an XML file that is one --- long line. --- Set to zero to remove the limit. --- --- @type integer vim.o.synmaxcol = 3000 vim.o.smc = vim.o.synmaxcol vim.bo.synmaxcol = vim.o.synmaxcol vim.bo.smc = vim.bo.synmaxcol --- When this option is set, the syntax with this name is loaded, unless --- syntax highlighting has been switched off with ":syntax off". --- Otherwise this option does not always reflect the current syntax (the --- b:current_syntax variable does). --- This option is most useful in a modeline, for a file which syntax is --- not automatically recognized. Example, in an IDL file: >c --- /* vim: set syntax=idl : */ --- ``` --- When a dot appears in the value then this separates two filetype --- names. Example: >c --- /* vim: set syntax=c.doxygen : */ --- ``` --- This will use the "c" syntax first, then the "doxygen" syntax. --- Note that the second one must be prepared to be loaded as an addition, --- otherwise it will be skipped. More than one dot may appear. --- To switch off syntax highlighting for the current file, use: --- --- ```vim --- set syntax=OFF --- ``` --- To switch syntax highlighting on according to the current value of the --- 'filetype' option: --- --- ```vim --- set syntax=ON --- ``` --- What actually happens when setting the 'syntax' option is that the --- Syntax autocommand event is triggered with the value as argument. --- This option is not copied to another buffer, independent of the 's' or --- 'S' flag in 'cpoptions'. --- Only alphanumeric characters, '.', '-' and '_' can be used. --- --- @type string vim.o.syntax = "" vim.o.syn = vim.o.syntax vim.bo.syntax = vim.o.syntax vim.bo.syn = vim.bo.syntax --- This option controls the behavior when closing tab pages (e.g., using --- `:tabclose`). When empty Vim goes to the next (right) tab page. --- --- Possible values (comma-separated list): --- left If included, go to the previous tab page instead of --- the next one. --- uselast If included, go to the previously used tab page if --- possible. This option takes precedence over the --- others. --- --- @type string vim.o.tabclose = "" vim.o.tcl = vim.o.tabclose vim.go.tabclose = vim.o.tabclose vim.go.tcl = vim.go.tabclose --- When non-empty, this option determines the content of the tab pages --- line at the top of the Vim window. When empty Vim will use a default --- tab pages line. See `setting-tabline` for more info. --- --- The tab pages line only appears as specified with the 'showtabline' --- option and only when there is no GUI tab line. When 'e' is in --- 'guioptions' and the GUI supports a tab line 'guitablabel' is used --- instead. Note that the two tab pages lines are very different. --- --- The value is evaluated like with 'statusline'. You can use --- `tabpagenr()`, `tabpagewinnr()` and `tabpagebuflist()` to figure out --- the text to be displayed. Use "%1T" for the first label, "%2T" for --- the second one, etc. Use "%X" items for closing labels. --- --- When changing something that is used in 'tabline' that does not --- trigger it to be updated, use `:redrawtabline`. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- Keep in mind that only one of the tab pages is the current one, others --- are invisible and you can't jump to their windows. --- --- @type string vim.o.tabline = "" vim.o.tal = vim.o.tabline vim.go.tabline = vim.o.tabline vim.go.tal = vim.go.tabline --- Maximum number of tab pages to be opened by the `-p` command line --- argument or the ":tab all" command. `tabpage` --- --- @type integer vim.o.tabpagemax = 50 vim.o.tpm = vim.o.tabpagemax vim.go.tabpagemax = vim.o.tabpagemax vim.go.tpm = vim.go.tabpagemax --- Number of spaces that a in the file counts for. Also see --- the `:retab` command, and the 'softtabstop' option. --- --- Note: Setting 'tabstop' to any other value than 8 can make your file --- appear wrong in many places. --- The value must be more than 0 and less than 10000. --- --- There are five main ways to use tabs in Vim: --- 1. Always keep 'tabstop' at 8, set 'softtabstop' and 'shiftwidth' to 4 --- (or 3 or whatever you prefer) and use 'noexpandtab'. Then Vim --- will use a mix of tabs and spaces, but typing and will --- behave like a tab appears every 4 (or 3) characters. --- This is the recommended way, the file will look the same with other --- tools and when listing it in a terminal. --- 2. Set 'softtabstop' and 'shiftwidth' to whatever you prefer and use --- 'expandtab'. This way you will always insert spaces. The --- formatting will never be messed up when 'tabstop' is changed (leave --- it at 8 just in case). The file will be a bit larger. --- You do need to check if no Tabs exist in the file. You can get rid --- of them by first setting 'expandtab' and using `%retab!`, making --- sure the value of 'tabstop' is set correctly. --- 3. Set 'tabstop' and 'shiftwidth' to whatever you prefer and use --- 'expandtab'. This way you will always insert spaces. The --- formatting will never be messed up when 'tabstop' is changed. --- You do need to check if no Tabs exist in the file, just like in the --- item just above. --- 4. Set 'tabstop' and 'shiftwidth' to whatever you prefer and use a --- `modeline` to set these values when editing the file again. Only --- works when using Vim to edit the file, other tools assume a tabstop --- is worth 8 spaces. --- 5. Always set 'tabstop' and 'shiftwidth' to the same value, and --- 'noexpandtab'. This should then work (for initial indents only) --- for any tabstop setting that people use. It might be nice to have --- tabs after the first non-blank inserted as spaces if you do this --- though. Otherwise aligned comments will be wrong when 'tabstop' is --- changed. --- --- The value of 'tabstop' will be ignored if `'vartabstop'` is set to --- anything other than an empty string. --- --- @type integer vim.o.tabstop = 8 vim.o.ts = vim.o.tabstop vim.bo.tabstop = vim.o.tabstop vim.bo.ts = vim.bo.tabstop --- When searching for a tag (e.g., for the `:ta` command), Vim can either --- use a binary search or a linear search in a tags file. Binary --- searching makes searching for a tag a LOT faster, but a linear search --- will find more tags if the tags file wasn't properly sorted. --- Vim normally assumes that your tags files are sorted, or indicate that --- they are not sorted. Only when this is not the case does the --- 'tagbsearch' option need to be switched off. --- --- When 'tagbsearch' is on, binary searching is first used in the tags --- files. In certain situations, Vim will do a linear search instead for --- certain files, or retry all files with a linear search. When --- 'tagbsearch' is off, only a linear search is done. --- --- Linear searching is done anyway, for one file, when Vim finds a line --- at the start of the file indicating that it's not sorted: --- ``` --- !_TAG_FILE_SORTED 0 /some comment/ --- ``` --- [The whitespace before and after the '0' must be a single ] --- --- When a binary search was done and no match was found in any of the --- files listed in 'tags', and case is ignored or a pattern is used --- instead of a normal tag name, a retry is done with a linear search. --- Tags in unsorted tags files, and matches with different case will only --- be found in the retry. --- --- If a tag file indicates that it is case-fold sorted, the second, --- linear search can be avoided when case is ignored. Use a value of '2' --- in the "!_TAG_FILE_SORTED" line for this. A tag file can be case-fold --- sorted with the -f switch to "sort" in most unices, as in the command: --- "sort -f -o tags tags". For Universal ctags and Exuberant ctags --- version 5.x or higher (at least 5.5) the --sort=foldcase switch can be --- used for this as well. Note that case must be folded to uppercase for --- this to work. --- --- By default, tag searches are case-sensitive. Case is ignored when --- 'ignorecase' is set and 'tagcase' is "followic", or when 'tagcase' is --- "ignore". --- Also when 'tagcase' is "followscs" and 'smartcase' is set, or --- 'tagcase' is "smart", and the pattern contains only lowercase --- characters. --- --- When 'tagbsearch' is off, tags searching is slower when a full match --- exists, but faster when no full match exists. Tags in unsorted tags --- files may only be found with 'tagbsearch' off. --- When the tags file is not sorted, or sorted in a wrong way (not on --- ASCII byte value), 'tagbsearch' should be off, or the line given above --- must be included in the tags file. --- This option doesn't affect commands that find all matching tags (e.g., --- command-line completion and ":help"). --- --- @type boolean vim.o.tagbsearch = true vim.o.tbs = vim.o.tagbsearch vim.go.tagbsearch = vim.o.tagbsearch vim.go.tbs = vim.go.tagbsearch --- This option specifies how case is handled when searching the tags --- file: --- followic Follow the 'ignorecase' option --- followscs Follow the 'smartcase' and 'ignorecase' options --- ignore Ignore case --- match Match case --- smart Ignore case unless an upper case letter is used --- --- @type string vim.o.tagcase = "followic" vim.o.tc = vim.o.tagcase vim.bo.tagcase = vim.o.tagcase vim.bo.tc = vim.bo.tagcase vim.go.tagcase = vim.o.tagcase vim.go.tc = vim.go.tagcase --- This option specifies a function to be used to perform tag searches. --- The function gets the tag pattern and should return a List of matching --- tags. See `tag-function` for an explanation of how to write the --- function and an example. The value can be the name of a function, a --- `lambda` or a `Funcref`. See `option-value-function` for more --- information. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.tagfunc = "" vim.o.tfu = vim.o.tagfunc vim.bo.tagfunc = vim.o.tagfunc vim.bo.tfu = vim.bo.tagfunc --- If non-zero, tags are significant up to this number of characters. --- --- @type integer vim.o.taglength = 0 vim.o.tl = vim.o.taglength vim.go.taglength = vim.o.taglength vim.go.tl = vim.go.taglength --- If on and using a tags file in another directory, file names in that --- tags file are relative to the directory where the tags file is. --- --- @type boolean vim.o.tagrelative = true vim.o.tr = vim.o.tagrelative vim.go.tagrelative = vim.o.tagrelative vim.go.tr = vim.go.tagrelative --- Filenames for the tag command, separated by spaces or commas. To --- include a space or comma in a file name, precede it with backslashes --- (see `option-backslash` about including spaces/commas and backslashes). --- When a file name starts with "./", the '.' is replaced with the path --- of the current file. But only when the 'd' flag is not included in --- 'cpoptions'. Environment variables are expanded `:set_env`. Also see --- `tags-option`. --- "*", "**" and other wildcards can be used to search for tags files in --- a directory tree. See `file-searching`. E.g., "/lib/**/tags" will --- find all files named "tags" below "/lib". The filename itself cannot --- contain wildcards, it is used as-is. E.g., "/lib/**/tags?" will find --- files called "tags?". --- The `tagfiles()` function can be used to get a list of the file names --- actually used. --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- file names from the list. This avoids problems when a future version --- uses another default. --- --- @type string vim.o.tags = "./tags;,tags" vim.o.tag = vim.o.tags vim.bo.tags = vim.o.tags vim.bo.tag = vim.bo.tags vim.go.tags = vim.o.tags vim.go.tag = vim.go.tags --- When on, the `tagstack` is used normally. When off, a ":tag" or --- ":tselect" command with an argument will not push the tag onto the --- tagstack. A following ":tag" without an argument, a ":pop" command or --- any other command that uses the tagstack will use the unmodified --- tagstack, but does change the pointer to the active entry. --- Resetting this option is useful when using a ":tag" command in a --- mapping which should not change the tagstack. --- --- @type boolean vim.o.tagstack = true vim.o.tgst = vim.o.tagstack vim.go.tagstack = vim.o.tagstack vim.go.tgst = vim.go.tagstack --- The terminal is in charge of Bi-directionality of text (as specified --- by Unicode). The terminal is also expected to do the required shaping --- that some languages (such as Arabic) require. --- Setting this option implies that 'rightleft' will not be set when --- 'arabic' is set and the value of 'arabicshape' will be ignored. --- Note that setting 'termbidi' has the immediate effect that --- 'arabicshape' is ignored, but 'rightleft' isn't changed automatically. --- For further details see `arabic.txt`. --- --- @type boolean vim.o.termbidi = false vim.o.tbidi = vim.o.termbidi vim.go.termbidi = vim.o.termbidi vim.go.tbidi = vim.go.termbidi --- Enables 24-bit RGB color in the `TUI`. Uses "gui" `:highlight` --- attributes instead of "cterm" attributes. `guifg` --- Requires an ISO-8613-3 compatible terminal. --- --- Nvim will automatically attempt to determine if the host terminal --- supports 24-bit color and will enable this option if it does --- (unless explicitly disabled by the user). --- --- @type boolean vim.o.termguicolors = false vim.o.tgc = vim.o.termguicolors vim.go.termguicolors = vim.o.termguicolors vim.go.tgc = vim.go.termguicolors --- A comma-separated list of options for specifying control characters --- to be removed from the text pasted into the terminal window. The --- supported values are: --- --- BS Backspace --- --- HT TAB --- --- FF Form feed --- --- ESC Escape --- --- DEL DEL --- --- C0 Other control characters, excluding Line feed and --- Carriage return < ' ' --- --- C1 Control characters 0x80...0x9F --- --- @type string vim.o.termpastefilter = "BS,HT,ESC,DEL" vim.o.tpf = vim.o.termpastefilter vim.go.termpastefilter = vim.o.termpastefilter vim.go.tpf = vim.go.termpastefilter --- If the host terminal supports it, buffer all screen updates --- made during a redraw cycle so that each screen is displayed in --- the terminal all at once. This can prevent tearing or flickering --- when the terminal updates faster than Nvim can redraw. --- --- @type boolean vim.o.termsync = true vim.go.termsync = vim.o.termsync --- Maximum width of text that is being inserted. A longer line will be --- broken after white space to get this width. A zero value disables --- this. --- When 'textwidth' is zero, 'wrapmargin' may be used. See also --- 'formatoptions' and `ins-textwidth`. --- When 'formatexpr' is set it will be used to break the line. --- --- @type integer vim.o.textwidth = 0 vim.o.tw = vim.o.textwidth vim.bo.textwidth = vim.o.textwidth vim.bo.tw = vim.bo.textwidth --- List of file names, separated by commas, that are used to lookup words --- for thesaurus completion commands `i_CTRL-X_CTRL-T`. See --- `compl-thesaurus`. --- --- This option is not used if 'thesaurusfunc' is set, either for the --- buffer or globally. --- --- To include a comma in a file name precede it with a backslash. Spaces --- after a comma are ignored, otherwise spaces are included in the file --- name. See `option-backslash` about using backslashes. The use of --- `:set+=` and `:set-=` is preferred when adding or removing directories --- from the list. This avoids problems when a future version uses --- another default. Backticks cannot be used in this option for security --- reasons. --- --- @type string vim.o.thesaurus = "" vim.o.tsr = vim.o.thesaurus vim.bo.thesaurus = vim.o.thesaurus vim.bo.tsr = vim.bo.thesaurus vim.go.thesaurus = vim.o.thesaurus vim.go.tsr = vim.go.thesaurus --- This option specifies a function to be used for thesaurus completion --- with CTRL-X CTRL-T. `i_CTRL-X_CTRL-T` See `compl-thesaurusfunc`. --- The value can be the name of a function, a `lambda` or a `Funcref`. --- See `option-value-function` for more information. --- --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.thesaurusfunc = "" vim.o.tsrfu = vim.o.thesaurusfunc vim.bo.thesaurusfunc = vim.o.thesaurusfunc vim.bo.tsrfu = vim.bo.thesaurusfunc vim.go.thesaurusfunc = vim.o.thesaurusfunc vim.go.tsrfu = vim.go.thesaurusfunc --- When on: The tilde command "~" behaves like an operator. --- --- @type boolean vim.o.tildeop = false vim.o.top = vim.o.tildeop vim.go.tildeop = vim.o.tildeop vim.go.top = vim.go.tildeop --- This option and 'timeoutlen' determine the behavior when part of a --- mapped key sequence has been received. For example, if is --- pressed and 'timeout' is set, Nvim will wait 'timeoutlen' milliseconds --- for any key that can follow in a mapping. --- --- @type boolean vim.o.timeout = true vim.o.to = vim.o.timeout vim.go.timeout = vim.o.timeout vim.go.to = vim.go.timeout --- Time in milliseconds to wait for a mapped sequence to complete. --- --- @type integer vim.o.timeoutlen = 1000 vim.o.tm = vim.o.timeoutlen vim.go.timeoutlen = vim.o.timeoutlen vim.go.tm = vim.go.timeoutlen --- When on, the title of the window will be set to the value of --- 'titlestring' (if it is not empty), or to: --- filename [+=-] (path) - Nvim --- Where: --- filename the name of the file being edited --- - indicates the file cannot be modified, 'ma' off --- + indicates the file was modified --- = indicates the file is read-only --- =+ indicates the file is read-only and modified --- (path) is the path of the file being edited --- - Nvim the server name `v:servername` or "Nvim" --- --- @type boolean vim.o.title = false vim.go.title = vim.o.title --- Gives the percentage of 'columns' to use for the length of the window --- title. When the title is longer, only the end of the path name is --- shown. A '<' character before the path name is used to indicate this. --- Using a percentage makes this adapt to the width of the window. But --- it won't work perfectly, because the actual number of characters --- available also depends on the font used and other things in the title --- bar. When 'titlelen' is zero the full path is used. Otherwise, --- values from 1 to 30000 percent can be used. --- 'titlelen' is also used for the 'titlestring' option. --- --- @type integer vim.o.titlelen = 85 vim.go.titlelen = vim.o.titlelen --- If not empty, this option will be used to set the window title when --- exiting. Only if 'title' is enabled. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.titleold = "" vim.go.titleold = vim.o.titleold --- When this option is not empty, it will be used for the title of the --- window. This happens only when the 'title' option is on. --- --- When this option contains printf-style '%' items, they will be --- expanded according to the rules used for 'statusline'. If it contains --- an invalid '%' format, the value is used as-is and no error or warning --- will be given when the value is set. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- Example: --- --- ```vim --- auto BufEnter * let &titlestring = hostname() .. "/" .. expand("%:p") --- set title titlestring=%<%F%=%l/%L-%P titlelen=70 --- ``` --- The value of 'titlelen' is used to align items in the middle or right --- of the available space. --- Some people prefer to have the file name first: --- --- ```vim --- set titlestring=%t%(\ %M%)%(\ (%{expand(\"%:~:.:h\")})%)%(\ %a%) --- ``` --- Note the use of "%{ }" and an expression to get the path of the file, --- without the file name. The "%( %)" constructs are used to add a --- separating space only when needed. --- NOTE: Use of special characters in 'titlestring' may cause the display --- to be garbled (e.g., when it contains a CR or NL character). --- --- @type string vim.o.titlestring = "" vim.go.titlestring = vim.o.titlestring --- This option and 'ttimeoutlen' determine the behavior when part of a --- key code sequence has been received by the `TUI`. --- --- For example if (the \x1b byte) is received and 'ttimeout' is --- set, Nvim waits 'ttimeoutlen' milliseconds for the terminal to --- complete a key code sequence. If no input arrives before the timeout, --- a single is assumed. Many TUI cursor key codes start with . --- --- On very slow systems this may fail, causing cursor keys not to work --- sometimes. If you discover this problem you can ":set ttimeoutlen=9999". --- Nvim will wait for the next character to arrive after an . --- --- @type boolean vim.o.ttimeout = true vim.go.ttimeout = vim.o.ttimeout --- Time in milliseconds to wait for a key code sequence to complete. Also --- used for CTRL-\ CTRL-N and CTRL-\ CTRL-G when part of a command has --- been typed. --- --- @type integer vim.o.ttimeoutlen = 50 vim.o.ttm = vim.o.ttimeoutlen vim.go.ttimeoutlen = vim.o.ttimeoutlen vim.go.ttm = vim.go.ttimeoutlen --- List of directory names for undo files, separated with commas. --- See 'backupdir' for details of the format. --- "." means using the directory of the file. The undo file name for --- "file.txt" is ".file.txt.un~". --- For other directories the file name is the full path of the edited --- file, with path separators replaced with "%". --- When writing: The first directory that exists is used. "." always --- works, no directories after "." will be used for writing. If none of --- the directories exist Nvim will attempt to create the last directory in --- the list. --- When reading all entries are tried to find an undo file. The first --- undo file that exists is used. When it cannot be read an error is --- given, no further entry is used. --- See `undo-persistence`. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- Note that unlike 'directory' and 'backupdir', 'undodir' always acts as --- though the trailing slashes are present (see 'backupdir' for what this --- means). --- --- @type string vim.o.undodir = "$XDG_STATE_HOME/nvim/undo//" vim.o.udir = vim.o.undodir vim.go.undodir = vim.o.undodir vim.go.udir = vim.go.undodir --- When on, Vim automatically saves undo history to an undo file when --- writing a buffer to a file, and restores undo history from the same --- file on buffer read. --- The directory where the undo file is stored is specified by 'undodir'. --- For more information about this feature see `undo-persistence`. --- The undo file is not read when 'undoreload' causes the buffer from --- before a reload to be saved for undo. --- When 'undofile' is turned off the undo file is NOT deleted. --- --- @type boolean vim.o.undofile = false vim.o.udf = vim.o.undofile vim.bo.undofile = vim.o.undofile vim.bo.udf = vim.bo.undofile --- Maximum number of changes that can be undone. Since undo information --- is kept in memory, higher numbers will cause more memory to be used. --- Nevertheless, a single change can already use a large amount of memory. --- Set to 0 for Vi compatibility: One level of undo and "u" undoes --- itself: --- --- ```vim --- set ul=0 --- ``` --- But you can also get Vi compatibility by including the 'u' flag in --- 'cpoptions', and still be able to use CTRL-R to repeat undo. --- Also see `undo-two-ways`. --- Set to -1 for no undo at all. You might want to do this only for the --- current buffer: --- --- ```vim --- setlocal ul=-1 --- ``` --- This helps when you run out of memory for a single change. --- --- The local value is set to -123456 when the global value is to be used. --- --- Also see `clear-undo`. --- --- @type integer vim.o.undolevels = 1000 vim.o.ul = vim.o.undolevels vim.bo.undolevels = vim.o.undolevels vim.bo.ul = vim.bo.undolevels vim.go.undolevels = vim.o.undolevels vim.go.ul = vim.go.undolevels --- Save the whole buffer for undo when reloading it. This applies to the --- ":e!" command and reloading for when the buffer changed outside of --- Vim. `FileChangedShell` --- The save only happens when this option is negative or when the number --- of lines is smaller than the value of this option. --- Set this option to zero to disable undo for a reload. --- --- When saving undo for a reload, any undo file is not read. --- --- Note that this causes the whole buffer to be stored in memory. Set --- this option to a lower value if you run out of memory. --- --- @type integer vim.o.undoreload = 10000 vim.o.ur = vim.o.undoreload vim.go.undoreload = vim.o.undoreload vim.go.ur = vim.go.undoreload --- After typing this many characters the swap file will be written to --- disk. When zero, no swap file will be created at all (see chapter on --- recovery `crash-recovery`). 'updatecount' is set to zero by starting --- Vim with the "-n" option, see `startup`. When editing in readonly --- mode this option will be initialized to 10000. --- The swapfile can be disabled per buffer with `'swapfile'`. --- When 'updatecount' is set from zero to non-zero, swap files are --- created for all buffers that have 'swapfile' set. When 'updatecount' --- is set to zero, existing swap files are not deleted. --- This option has no meaning in buffers where `'buftype'` is "nofile" --- or "nowrite". --- --- @type integer vim.o.updatecount = 200 vim.o.uc = vim.o.updatecount vim.go.updatecount = vim.o.updatecount vim.go.uc = vim.go.updatecount --- If this many milliseconds nothing is typed the swap file will be --- written to disk (see `crash-recovery`). Also used for the --- `CursorHold` autocommand event. --- --- @type integer vim.o.updatetime = 4000 vim.o.ut = vim.o.updatetime vim.go.updatetime = vim.o.updatetime vim.go.ut = vim.go.updatetime --- A list of the number of spaces that a counts for while editing, --- such as inserting a or using . It "feels" like variable- --- width s are being inserted, while in fact a mixture of spaces --- and s is used. Tab widths are separated with commas, with the --- final value applying to all subsequent tabs. --- --- For example, when editing assembly language files where statements --- start in the 9th column and comments in the 41st, it may be useful --- to use the following: --- --- ```vim --- set varsofttabstop=8,32,8 --- ``` --- This will set soft tabstops with 8 and 8 + 32 spaces, and 8 more --- for every column thereafter. --- --- Note that the value of `'softtabstop'` will be ignored while --- 'varsofttabstop' is set. --- --- @type string vim.o.varsofttabstop = "" vim.o.vsts = vim.o.varsofttabstop vim.bo.varsofttabstop = vim.o.varsofttabstop vim.bo.vsts = vim.bo.varsofttabstop --- A list of the number of spaces that a in the file counts for, --- separated by commas. Each value corresponds to one tab, with the --- final value applying to all subsequent tabs. For example: --- --- ```vim --- set vartabstop=4,20,10,8 --- ``` --- This will make the first tab 4 spaces wide, the second 20 spaces, --- the third 10 spaces, and all following tabs 8 spaces. --- --- Note that the value of `'tabstop'` will be ignored while 'vartabstop' --- is set. --- --- @type string vim.o.vartabstop = "" vim.o.vts = vim.o.vartabstop vim.bo.vartabstop = vim.o.vartabstop vim.bo.vts = vim.bo.vartabstop --- Sets the verbosity level. Also set by `-V` and `:verbose`. --- --- Tracing of assignments to options, mappings, etc. in Lua scripts is --- enabled at level 1; Lua scripts are not traced when 'verbose' is 0, --- for performance. --- --- If greater than or equal to a given level, Nvim produces the following --- messages: --- --- Level Messages ~ --- ---------------------------------------------------------------------- --- 1 Enables Lua tracing (see above). Does not produce messages. --- 2 When a file is ":source"'ed, or `shada` file is read or written. --- 3 UI info, terminal capabilities. --- 4 Shell commands. --- 5 Every searched tags file and include file. --- 8 Files for which a group of autocommands is executed. --- 9 Executed autocommands. --- 11 Finding items in a path. --- 12 Vimscript function calls. --- 13 When an exception is thrown, caught, finished, or discarded. --- 14 Anything pending in a ":finally" clause. --- 15 Ex commands from a script (truncated at 200 characters). --- 16 Ex commands. --- --- If 'verbosefile' is set then the verbose messages are not displayed. --- --- @type integer vim.o.verbose = 0 vim.o.vbs = vim.o.verbose vim.go.verbose = vim.o.verbose vim.go.vbs = vim.go.verbose --- When not empty all messages are written in a file with this name. --- When the file exists messages are appended. --- Writing to the file ends when Vim exits or when 'verbosefile' is made --- empty. Writes are buffered, thus may not show up for some time. --- Setting 'verbosefile' to a new value is like making it empty first. --- The difference with `:redir` is that verbose messages are not --- displayed when 'verbosefile' is set. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.verbosefile = "" vim.o.vfile = vim.o.verbosefile vim.go.verbosefile = vim.o.verbosefile vim.go.vfile = vim.go.verbosefile --- Name of the directory where to store files for `:mkview`. --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. --- --- @type string vim.o.viewdir = "$XDG_STATE_HOME/nvim/view//" vim.o.vdir = vim.o.viewdir vim.go.viewdir = vim.o.viewdir vim.go.vdir = vim.go.viewdir --- Changes the effect of the `:mkview` command. It is a comma-separated --- list of words. Each word enables saving and restoring something: --- word save and restore ~ --- cursor cursor position in file and in window --- curdir local current directory, if set with `:lcd` --- folds manually created folds, opened/closed folds and local --- fold options --- options options and mappings local to a window or buffer (not --- global values for local options) --- localoptions same as "options" --- slash `deprecated` Always enabled. Uses "/" in filenames. --- unix `deprecated` Always enabled. Uses "\n" line endings. --- --- @type string vim.o.viewoptions = "folds,cursor,curdir" vim.o.vop = vim.o.viewoptions vim.go.viewoptions = vim.o.viewoptions vim.go.vop = vim.go.viewoptions --- A comma-separated list of these words: --- block Allow virtual editing in Visual block mode. --- insert Allow virtual editing in Insert mode. --- all Allow virtual editing in all modes. --- onemore Allow the cursor to move just past the end of the line --- none When used as the local value, do not allow virtual --- editing even when the global value is set. When used --- as the global value, "none" is the same as "". --- NONE Alternative spelling of "none". --- --- Virtual editing means that the cursor can be positioned where there is --- no actual character. This can be halfway into a tab or beyond the end --- of the line. Useful for selecting a rectangle in Visual mode and --- editing a table. --- "onemore" is not the same, it will only allow moving the cursor just --- after the last character of the line. This makes some commands more --- consistent. Previously the cursor was always past the end of the line --- if the line was empty. But it is far from Vi compatible. It may also --- break some plugins or Vim scripts. For example because `l` can move --- the cursor after the last character. Use with care! --- Using the `$` command will move to the last character in the line, not --- past it. This may actually move the cursor to the left! --- The `g$` command will move to the end of the screen line. --- It doesn't make sense to combine "all" with "onemore", but you will --- not get a warning for it. --- When combined with other words, "none" is ignored. --- --- @type string vim.o.virtualedit = "" vim.o.ve = vim.o.virtualedit vim.wo.virtualedit = vim.o.virtualedit vim.wo.ve = vim.wo.virtualedit vim.go.virtualedit = vim.o.virtualedit vim.go.ve = vim.go.virtualedit --- Use visual bell instead of beeping. Also see 'errorbells'. --- --- @type boolean vim.o.visualbell = false vim.o.vb = vim.o.visualbell vim.go.visualbell = vim.o.visualbell vim.go.vb = vim.go.visualbell --- Give a warning message when a shell command is used while the buffer --- has been changed. --- --- @type boolean vim.o.warn = true vim.go.warn = vim.o.warn --- Allow specified keys that move the cursor left/right to move to the --- previous/next line when the cursor is on the first/last character in --- the line. Concatenate characters to allow this for these keys: --- char key mode ~ --- b Normal and Visual --- s Normal and Visual --- h "h" Normal and Visual (not recommended) --- l "l" Normal and Visual (not recommended) --- < Normal and Visual --- > Normal and Visual --- ~ "~" Normal --- [ Insert and Replace --- ] Insert and Replace --- For example: --- --- ```vim --- set ww=<,>,[,] --- ``` --- allows wrap only when cursor keys are used. --- When the movement keys are used in combination with a delete or change --- operator, the also counts for a character. This makes "3h" --- different from "3dh" when the cursor crosses the end of a line. This --- is also true for "x" and "X", because they do the same as "dl" and --- "dh". If you use this, you may also want to use the mapping --- ":map X" to make backspace delete the character in front of the --- cursor. --- When 'l' is included and it is used after an operator at the end of a --- line (not an empty line) then it will not move to the next line. This --- makes "dl", "cl", "yl" etc. work normally. --- --- @type string vim.o.whichwrap = "b,s" vim.o.ww = vim.o.whichwrap vim.go.whichwrap = vim.o.whichwrap vim.go.ww = vim.go.whichwrap --- Character you have to type to start wildcard expansion in the --- command-line, as specified with 'wildmode'. --- More info here: `cmdline-completion`. --- The character is not recognized when used inside a macro. See --- 'wildcharm' for that. --- Some keys will not work, such as CTRL-C, and Enter. --- can be used, but hitting it twice in a row will still exit --- command-line as a failsafe measure. --- Although 'wc' is a number option, it can be specified as a number, a --- single character, a `key-notation` (e.g. , ) or a letter --- preceded with a caret (e.g. `^F` is CTRL-F): --- --- ```vim --- :set wc=27 --- :set wc=X --- :set wc=^I --- set wc= --- ``` --- --- --- @type integer vim.o.wildchar = 9 vim.o.wc = vim.o.wildchar vim.go.wildchar = vim.o.wildchar vim.go.wc = vim.go.wildchar --- 'wildcharm' works exactly like 'wildchar', except that it is --- recognized when used inside a macro. You can find "spare" command-line --- keys suitable for this option by looking at `ex-edit-index`. Normally --- you'll never actually type 'wildcharm', just use it in mappings that --- automatically invoke completion mode, e.g.: --- --- ```vim --- set wcm= --- cnoremap ss so $vim/sessions/*.vim --- ``` --- Then after typing :ss you can use CTRL-P & CTRL-N. --- --- @type integer vim.o.wildcharm = 0 vim.o.wcm = vim.o.wildcharm vim.go.wildcharm = vim.o.wildcharm vim.go.wcm = vim.go.wildcharm --- A list of file patterns. A file that matches with one of these --- patterns is ignored when expanding `wildcards`, completing file or --- directory names, and influences the result of `expand()`, `glob()` and --- `globpath()` unless a flag is passed to disable this. --- The pattern is used like with `:autocmd`, see `autocmd-pattern`. --- Also see 'suffixes'. --- Example: --- --- ```vim --- set wildignore=*.o,*.obj --- ``` --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- a pattern from the list. This avoids problems when a future version --- uses another default. --- --- @type string vim.o.wildignore = "" vim.o.wig = vim.o.wildignore vim.go.wildignore = vim.o.wildignore vim.go.wig = vim.go.wildignore --- When set case is ignored when completing file names and directories. --- Has no effect when 'fileignorecase' is set. --- Does not apply when the shell is used to expand wildcards, which --- happens when there are special characters. --- --- @type boolean vim.o.wildignorecase = false vim.o.wic = vim.o.wildignorecase vim.go.wildignorecase = vim.o.wildignorecase vim.go.wic = vim.go.wildignorecase --- When 'wildmenu' is on, command-line completion operates in an enhanced --- mode. On pressing 'wildchar' (usually ) to invoke completion, --- the possible matches are shown. --- When 'wildoptions' contains "pum", then the completion matches are --- shown in a popup menu. Otherwise they are displayed just above the --- command line, with the first match highlighted (overwriting the status --- line, if there is one). --- Keys that show the previous/next match, such as or --- CTRL-P/CTRL-N, cause the highlight to move to the appropriate match. --- 'wildmode' must specify "full": "longest" and "list" do not start --- 'wildmenu' mode. You can check the current mode with `wildmenumode()`. --- The menu is cancelled when a key is hit that is not used for selecting --- a completion. --- --- While the menu is active these keys have special meanings: --- CTRL-P - go to the previous entry --- CTRL-N - go to the next entry --- - select previous/next match (like CTRL-P/CTRL-N) --- - select a match several entries back --- - select a match several entries further --- - in filename/menu name completion: move up into --- parent directory or parent menu. --- - in filename/menu name completion: move into a --- subdirectory or submenu. --- - in menu completion, when the cursor is just after a --- dot: move into a submenu. --- CTRL-E - end completion, go back to what was there before --- selecting a match. --- CTRL-Y - accept the currently selected match and stop --- completion. --- --- If you want and to move the cursor instead of selecting --- a different match, use this: --- --- ```vim --- cnoremap --- cnoremap --- ``` --- --- `hl-WildMenu` highlights the current match. --- --- @type boolean vim.o.wildmenu = true vim.o.wmnu = vim.o.wildmenu vim.go.wildmenu = vim.o.wildmenu vim.go.wmnu = vim.go.wildmenu --- Completion mode that is used for the character specified with --- 'wildchar'. It is a comma-separated list of up to four parts. Each --- part specifies what to do for each consecutive use of 'wildchar'. The --- first part specifies the behavior for the first use of 'wildchar', --- The second part for the second use, etc. --- --- Each part consists of a colon separated list consisting of the --- following possible values: --- "" Complete only the first match. --- "full" Complete the next full match. After the last match, --- the original string is used and then the first match --- again. Will also start 'wildmenu' if it is enabled. --- "longest" Complete till longest common string. If this doesn't --- result in a longer string, use the next part. --- "list" When more than one match, list all matches. --- "lastused" When completing buffer names and more than one buffer --- matches, sort buffers by time last used (other than --- the current buffer). --- When there is only a single match, it is fully completed in all cases. --- --- Examples of useful colon-separated values: --- "longest:full" Like "longest", but also start 'wildmenu' if it is --- enabled. Will not complete to the next full match. --- "list:full" When more than one match, list all matches and --- complete first match. --- "list:longest" When more than one match, list all matches and --- complete till longest common string. --- "list:lastused" When more than one buffer matches, list all matches --- and sort buffers by time last used (other than the --- current buffer). --- --- Examples: --- --- ```vim --- set wildmode=full --- ``` --- Complete first full match, next match, etc. (the default) --- --- ```vim --- set wildmode=longest,full --- ``` --- Complete longest common string, then each full match --- --- ```vim --- set wildmode=list:full --- ``` --- List all matches and complete each full match --- --- ```vim --- set wildmode=list,full --- ``` --- List all matches without completing, then each full match --- --- ```vim --- set wildmode=longest,list --- ``` --- Complete longest common string, then list alternatives. --- More info here: `cmdline-completion`. --- --- @type string vim.o.wildmode = "full" vim.o.wim = vim.o.wildmode vim.go.wildmode = vim.o.wildmode vim.go.wim = vim.go.wildmode --- A list of words that change how `cmdline-completion` is done. --- The following values are supported: --- fuzzy Use `fuzzy-matching` to find completion matches. When --- this value is specified, wildcard expansion will not --- be used for completion. The matches will be sorted by --- the "best match" rather than alphabetically sorted. --- This will find more matches than the wildcard --- expansion. Currently fuzzy matching based completion --- is not supported for file and directory names and --- instead wildcard expansion is used. --- pum Display the completion matches using the popup menu --- in the same style as the `ins-completion-menu`. --- tagfile When using CTRL-D to list matching tags, the kind of --- tag and the file of the tag is listed. Only one match --- is displayed per line. Often used tag kinds are: --- d #define --- f function --- --- @type string vim.o.wildoptions = "pum,tagfile" vim.o.wop = vim.o.wildoptions vim.go.wildoptions = vim.o.wildoptions vim.go.wop = vim.go.wildoptions --- only used in Win32 --- Some GUI versions allow the access to menu entries by using the ALT --- key in combination with a character that appears underlined in the --- menu. This conflicts with the use of the ALT key for mappings and --- entering special characters. This option tells what to do: --- no Don't use ALT keys for menus. ALT key combinations can be --- mapped, but there is no automatic handling. --- yes ALT key handling is done by the windowing system. ALT key --- combinations cannot be mapped. --- menu Using ALT in combination with a character that is a menu --- shortcut key, will be handled by the windowing system. Other --- keys can be mapped. --- If the menu is disabled by excluding 'm' from 'guioptions', the ALT --- key is never used for the menu. --- This option is not used for ; on Win32. --- --- @type string vim.o.winaltkeys = "menu" vim.o.wak = vim.o.winaltkeys vim.go.winaltkeys = vim.o.winaltkeys vim.go.wak = vim.go.winaltkeys --- When non-empty, this option enables the window bar and determines its --- contents. The window bar is a bar that's shown at the top of every --- window with it enabled. The value of 'winbar' is evaluated like with --- 'statusline'. --- --- When changing something that is used in 'winbar' that does not trigger --- it to be updated, use `:redrawstatus`. --- --- Floating windows do not use the global value of 'winbar'. The --- window-local value of 'winbar' must be set for a floating window to --- have a window bar. --- --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- @type string vim.o.winbar = "" vim.o.wbr = vim.o.winbar vim.wo.winbar = vim.o.winbar vim.wo.wbr = vim.wo.winbar vim.go.winbar = vim.o.winbar vim.go.wbr = vim.go.winbar --- Enables pseudo-transparency for a floating window. Valid values are in --- the range of 0 for fully opaque window (disabled) to 100 for fully --- transparent background. Values between 0-30 are typically most useful. --- --- UI-dependent. Works best with RGB colors. 'termguicolors' --- --- @type integer vim.o.winblend = 0 vim.o.winbl = vim.o.winblend vim.wo.winblend = vim.o.winblend vim.wo.winbl = vim.wo.winblend --- Window height used for `CTRL-F` and `CTRL-B` when there is only one --- window and the value is smaller than 'lines' minus one. The screen --- will scroll 'window' minus two lines, with a minimum of one. --- When 'window' is equal to 'lines' minus one CTRL-F and CTRL-B scroll --- in a much smarter way, taking care of wrapping lines. --- When resizing the Vim window, and the value is smaller than 1 or more --- than or equal to 'lines' it will be set to 'lines' minus 1. --- Note: Do not confuse this with the height of the Vim window, use --- 'lines' for that. --- --- @type integer vim.o.window = 0 vim.o.wi = vim.o.window vim.go.window = vim.o.window vim.go.wi = vim.go.window --- If enabled, the window and the buffer it is displaying are paired. --- For example, attempting to change the buffer with `:edit` will fail. --- Other commands which change a window's buffer such as `:cnext` will --- also skip any window with 'winfixbuf' enabled. However if an Ex --- command has a "!" modifier, it can force switching buffers. --- --- @type boolean vim.o.winfixbuf = false vim.o.wfb = vim.o.winfixbuf vim.wo.winfixbuf = vim.o.winfixbuf vim.wo.wfb = vim.wo.winfixbuf --- Keep the window height when windows are opened or closed and --- 'equalalways' is set. Also for `CTRL-W_=`. Set by default for the --- `preview-window` and `quickfix-window`. --- The height may be changed anyway when running out of room. --- --- @type boolean vim.o.winfixheight = false vim.o.wfh = vim.o.winfixheight vim.wo.winfixheight = vim.o.winfixheight vim.wo.wfh = vim.wo.winfixheight --- Keep the window width when windows are opened or closed and --- 'equalalways' is set. Also for `CTRL-W_=`. --- The width may be changed anyway when running out of room. --- --- @type boolean vim.o.winfixwidth = false vim.o.wfw = vim.o.winfixwidth vim.wo.winfixwidth = vim.o.winfixwidth vim.wo.wfw = vim.wo.winfixwidth --- Minimal number of lines for the current window. This is not a hard --- minimum, Vim will use fewer lines if there is not enough room. If the --- focus goes to a window that is smaller, its size is increased, at the --- cost of the height of other windows. --- Set 'winheight' to a small number for normal editing. --- Set it to 999 to make the current window fill most of the screen. --- Other windows will be only 'winminheight' high. This has the drawback --- that ":all" will create only two windows. To avoid "vim -o 1 2 3 4" --- to create only two windows, set the option after startup is done, --- using the `VimEnter` event: --- --- ```vim --- au VimEnter * set winheight=999 --- ``` --- Minimum value is 1. --- The height is not adjusted after one of the commands that change the --- height of the current window. --- 'winheight' applies to the current window. Use 'winminheight' to set --- the minimal height for other windows. --- --- @type integer vim.o.winheight = 1 vim.o.wh = vim.o.winheight vim.go.winheight = vim.o.winheight vim.go.wh = vim.go.winheight --- Window-local highlights. Comma-delimited list of highlight --- `group-name` pairs "{hl-from}:{hl-to},..." where each {hl-from} is --- a `highlight-groups` item to be overridden by {hl-to} group in --- the window. --- --- Note: highlight namespaces take precedence over 'winhighlight'. --- See `nvim_win_set_hl_ns()` and `nvim_set_hl()`. --- --- Highlights of vertical separators are determined by the window to the --- left of the separator. The 'tabline' highlight of a tabpage is --- decided by the last-focused window of the tabpage. Highlights of --- the popupmenu are determined by the current window. Highlights in the --- message area cannot be overridden. --- --- Example: show a different color for non-current windows: --- --- ```vim --- set winhighlight=Normal:MyNormal,NormalNC:MyNormalNC --- ``` --- --- --- @type string vim.o.winhighlight = "" vim.o.winhl = vim.o.winhighlight vim.wo.winhighlight = vim.o.winhighlight vim.wo.winhl = vim.wo.winhighlight --- The minimal height of a window, when it's not the current window. --- This is a hard minimum, windows will never become smaller. --- When set to zero, windows may be "squashed" to zero lines (i.e. just a --- status bar) if necessary. They will return to at least one line when --- they become active (since the cursor has to have somewhere to go.) --- Use 'winheight' to set the minimal height of the current window. --- This option is only checked when making a window smaller. Don't use a --- large number, it will cause errors when opening more than a few --- windows. A value of 0 to 3 is reasonable. --- --- @type integer vim.o.winminheight = 1 vim.o.wmh = vim.o.winminheight vim.go.winminheight = vim.o.winminheight vim.go.wmh = vim.go.winminheight --- The minimal width of a window, when it's not the current window. --- This is a hard minimum, windows will never become smaller. --- When set to zero, windows may be "squashed" to zero columns (i.e. just --- a vertical separator) if necessary. They will return to at least one --- line when they become active (since the cursor has to have somewhere --- to go.) --- Use 'winwidth' to set the minimal width of the current window. --- This option is only checked when making a window smaller. Don't use a --- large number, it will cause errors when opening more than a few --- windows. A value of 0 to 12 is reasonable. --- --- @type integer vim.o.winminwidth = 1 vim.o.wmw = vim.o.winminwidth vim.go.winminwidth = vim.o.winminwidth vim.go.wmw = vim.go.winminwidth --- Minimal number of columns for the current window. This is not a hard --- minimum, Vim will use fewer columns if there is not enough room. If --- the current window is smaller, its size is increased, at the cost of --- the width of other windows. Set it to 999 to make the current window --- always fill the screen. Set it to a small number for normal editing. --- The width is not adjusted after one of the commands to change the --- width of the current window. --- 'winwidth' applies to the current window. Use 'winminwidth' to set --- the minimal width for other windows. --- --- @type integer vim.o.winwidth = 20 vim.o.wiw = vim.o.winwidth vim.go.winwidth = vim.o.winwidth vim.go.wiw = vim.go.winwidth --- This option changes how text is displayed. It doesn't change the text --- in the buffer, see 'textwidth' for that. --- When on, lines longer than the width of the window will wrap and --- displaying continues on the next line. When off lines will not wrap --- and only part of long lines will be displayed. When the cursor is --- moved to a part that is not shown, the screen will scroll --- horizontally. --- The line will be broken in the middle of a word if necessary. See --- 'linebreak' to get the break at a word boundary. --- To make scrolling horizontally a bit more useful, try this: --- --- ```vim --- set sidescroll=5 --- set listchars+=precedes:<,extends:> --- ``` --- See 'sidescroll', 'listchars' and `wrap-off`. --- This option can't be set from a `modeline` when the 'diff' option is --- on. --- --- @type boolean vim.o.wrap = true vim.wo.wrap = vim.o.wrap --- Number of characters from the right window border where wrapping --- starts. When typing text beyond this limit, an will be inserted --- and inserting continues on the next line. --- Options that add a margin, such as 'number' and 'foldcolumn', cause --- the text width to be further reduced. --- When 'textwidth' is non-zero, this option is not used. --- See also 'formatoptions' and `ins-textwidth`. --- --- @type integer vim.o.wrapmargin = 0 vim.o.wm = vim.o.wrapmargin vim.bo.wrapmargin = vim.o.wrapmargin vim.bo.wm = vim.bo.wrapmargin --- Searches wrap around the end of the file. Also applies to `]s` and --- `[s`, searching for spelling mistakes. --- --- @type boolean vim.o.wrapscan = true vim.o.ws = vim.o.wrapscan vim.go.wrapscan = vim.o.wrapscan vim.go.ws = vim.go.wrapscan --- Allows writing files. When not set, writing a file is not allowed. --- Can be used for a view-only mode, where modifications to the text are --- still allowed. Can be reset with the `-m` or `-M` command line --- argument. Filtering text is still possible, even though this requires --- writing a temporary file. --- --- @type boolean vim.o.write = true vim.go.write = vim.o.write --- Allows writing to any file with no need for "!" override. --- --- @type boolean vim.o.writeany = false vim.o.wa = vim.o.writeany vim.go.writeany = vim.o.writeany vim.go.wa = vim.go.writeany --- Make a backup before overwriting a file. The backup is removed after --- the file was successfully written, unless the 'backup' option is --- also on. --- WARNING: Switching this option off means that when Vim fails to write --- your buffer correctly and then, for whatever reason, Vim exits, you --- lose both the original file and what you were writing. Only reset --- this option if your file system is almost full and it makes the write --- fail (and make sure not to exit Vim until the write was successful). --- See `backup-table` for another explanation. --- When the 'backupskip' pattern matches, a backup is not made anyway. --- Depending on 'backupcopy' the backup is a new file or the original --- file renamed (and a new file is written). --- --- @type boolean vim.o.writebackup = true vim.o.wb = vim.o.writebackup vim.go.writebackup = vim.o.writebackup vim.go.wb = vim.go.writebackup --- Only takes effect together with 'redrawdebug'. --- The number of milliseconds to wait after each line or each flush --- --- @type integer vim.o.writedelay = 0 vim.o.wd = vim.o.writedelay vim.go.writedelay = vim.o.writedelay vim.go.wd = vim.go.writedelay