test(cursor_spec): global highlight definitions

Fixes: https://github.com/neovim/neovim/issues/31612

runtime/colors/vim.lua

@@ -60,6 +60,7 @@ hi('PmenuMatch',     { link = 'Pmenu' })
 hi('PmenuMatchSel',  { link = 'PmenuSel' })
 hi('PmenuExtra',     { link = 'Pmenu' })
 hi('PmenuExtraSel',  { link = 'PmenuSel' })
+hi('ComplMatchIns',  { link = 'Normal' })
 hi('Substitute',     { link = 'Search' })
 hi('Whitespace',     { link = 'NonText' })
 hi('MsgSeparator',   { link = 'StatusLine' })

runtime/doc/fold.txt

@@ -101,7 +101,8 @@ The result of foldexpr then determines the fold level as follows:
   "<1", "<2", ..	a fold with this level ends at this line
   ">1", ">2", ..	a fold with this level starts at this line
 
-The result values "=", "s" and "a" are more expensive, please see |fold-expr-slow|.
+The result values "=", "s" and "a" are more expensive, please see
+|fold-expr-slow|.
 
 It is not required to mark the start (end) of a fold with ">1" ("<1"), a fold
 will also start (end) when the fold level is higher (lower) than the fold
@@ -117,7 +118,7 @@ For debugging the 'debug' option can be set to "msg", the error messages will
 be visible then.
 
 If the 'foldexpr' expression starts with s: or |<SID>|, then it is replaced
-with the script ID (|local-function|). Examples: >
+with the script ID (|local-function|).  Examples: >
 		set foldexpr=s:MyFoldExpr()
 		set foldexpr=<SID>SomeFoldExpr()
 <
@@ -141,7 +142,7 @@ end in that line.
 It may happen that folds are not updated properly.  You can use |zx| or |zX|
 to force updating folds.
 
-Minimizing Computational Cost			             *fold-expr-slow*
+MINIMIZING COMPUTATIONAL COST				*fold-expr-slow*
 
 Due to its computational cost, this fold method can make Vim unresponsive,
 especially when the fold level of all lines have to be initially computed.
@@ -149,13 +150,15 @@ Afterwards, after each change, Vim restricts the computation of foldlevels
 to those lines whose fold level was affected by it (and reuses the known
 foldlevels of all the others).
 
-The fold expression should therefore strive to minimize the number of dependent
-lines needed for the computation of a given line: For example, try to avoid the
-"=", "a" and "s" return values, because these will require the evaluation of the
-fold levels on previous lines until an independent fold level is found.
+The fold expression should therefore strive to minimize the number of
+dependent lines needed for the computation of a given line: For example, try
+to avoid the "=", "a" and "s" return values, because these will require the
+evaluation of the fold levels on previous lines until an independent fold
+level is found.
 
-If this proves difficult, the next best thing could be to cache all fold levels
-in a buffer-local variable (b:foldlevels) that is only updated on |b:changedtick|:
+If this proves difficult, the next best thing could be to cache all fold
+levels in a buffer-local variable (b:foldlevels) that is only updated on
+|b:changedtick|:
 >vim
   func MyFoldFunc()
     if b:lasttick == b:changedtick
@@ -406,8 +409,8 @@ zX		Undo manually opened and closed folds: re-apply 'foldlevel'.
 		Also forces recomputing folds, like |zx|.
 
 							*zm*
-zm		Fold more: Subtract |v:count1| from 'foldlevel'.  If 'foldlevel' was
-		already zero nothing happens.
+zm		Fold more: Subtract |v:count1| from 'foldlevel'.  If
+		'foldlevel' was already zero nothing happens.
 		'foldenable' will be set.
 
 							*zM*
@@ -471,7 +474,7 @@ zk		Move upwards to the end of the previous fold.  A closed fold
 
 EXECUTING COMMANDS ON FOLDS ~
 
-:[range]foldd[oopen] {cmd}			*:foldd* *:folddo* *:folddoopen*
+:[range]foldd[oopen] {cmd}		*:foldd* *:folddo* *:folddoopen*
 		Execute {cmd} on all lines that are not in a closed fold.
 		When [range] is given, only these lines are used.
 		Each time {cmd} is executed the cursor is positioned on the
@@ -559,7 +562,7 @@ When there is room after the text, it is filled with the character specified
 by 'fillchars'.
 
 If the 'foldtext' expression starts with s: or |<SID>|, then it is replaced
-with the script ID (|local-function|). Examples: >
+with the script ID (|local-function|).  Examples: >
 		set foldtext=s:MyFoldText()
 		set foldtext=<SID>SomeFoldText()
 <

runtime/doc/lsp.txt

@@ -1126,6 +1126,9 @@ Lua module: vim.lsp.client                                        *lsp-client*
       • {server_capabilities}   (`lsp.ServerCapabilities?`) Response from the
                                 server sent on `initialize` describing the
                                 server's capabilities.
+      • {server_info}           (`lsp.ServerInfo?`) Response from the server
+                                sent on `initialize` describing information
+                                about the server.
       • {progress}              (`vim.lsp.Client.Progress`) A ring buffer
                                 (|vim.ringbuf()|) containing progress messages
                                 sent by the server. See

runtime/doc/motion.txt

@@ -118,8 +118,8 @@ Note that when using ":" any motion becomes charwise exclusive.
 					*inclusive-motion-selection-exclusive*
 When 'selection' is "exclusive", |Visual| mode is active and an inclusive
 motion has been used, the cursor position will be adjusted by another
-character to the right, so that visual selction includes the expected text and
-can be acted upon.
+character to the right, so that the Visual selection includes the expected
+text and can be acted upon.
 
 								*forced-motion*
 FORCING A MOTION TO BE LINEWISE, CHARWISE OR BLOCKWISE

runtime/doc/news.txt

@@ -115,6 +115,7 @@ LSP
 • |vim.lsp.util.make_position_params()|, |vim.lsp.util.make_range_params()|
   and |vim.lsp.util.make_given_range_params()| now require the `position_encoding`
   parameter.
+• `:checkhealth vim.lsp` displays the server version (if available).
 
 LUA
 
@@ -216,6 +217,7 @@ EDITOR
 • On Windows, filename arguments on the command-line prefixed with "~\" or
   "~/" are now expanded to the user's profile directory, not a relative path
   to a literal "~" directory.
+• |hl-ComplMatchIns| shows matched text of the currently inserted completion.
 • |hl-PmenuMatch| and |hl-PmenuMatchSel| show matched text in completion popup.
 
 EVENTS

runtime/doc/syntax.txt

@@ -5243,6 +5243,8 @@ PmenuMatch	Popup menu: Matched text in normal item. Combined with
 							*hl-PmenuMatchSel*
 PmenuMatchSel	Popup menu: Matched text in selected item. Combined with
 		|hl-PmenuMatch| and |hl-PmenuSel|.
+							*hl-ComplMatchIns*
+ComplMatchIns	Matched text of the currently inserted completion.
 							*hl-Question*
 Question	|hit-enter| prompt and yes/no questions.
 							*hl-QuickFixLine*

runtime/lua/vim/lsp.lua

@@ -211,7 +211,7 @@ local function reuse_client_default(client, config)
 
   for _, config_folder in ipairs(config_folders) do
     local found = false
-    for _, client_folder in ipairs(client.workspace_folders) do
+    for _, client_folder in ipairs(client.workspace_folders or {}) do
       if config_folder.uri == client_folder.uri then
         found = true
         break

runtime/lua/vim/lsp/client.lua

@@ -174,6 +174,10 @@ local validate = vim.validate
 --- capabilities.
 --- @field server_capabilities lsp.ServerCapabilities?
 ---
+--- Response from the server sent on `initialize` describing information about
+--- the server.
+--- @field server_info lsp.ServerInfo?
+---
 --- A ring buffer (|vim.ringbuf()|) containing progress messages
 --- sent by the server.
 --- @field progress vim.lsp.Client.Progress
@@ -556,6 +560,8 @@ function Client:initialize()
       self.offset_encoding = self.server_capabilities.positionEncoding
     end
 
+    self.server_info = result.serverInfo
+
     if next(self.settings) then
       self:notify(ms.workspace_didChangeConfiguration, { settings = self.settings })
     end

runtime/lua/vim/lsp/health.lua

@@ -40,6 +40,8 @@ local function check_active_clients()
   local clients = vim.lsp.get_clients()
   if next(clients) then
     for _, client in pairs(clients) do
+      local server_version = vim.tbl_get(client, 'server_info', 'version')
+        or '? (no serverInfo.version response)'
       local cmd ---@type string
       local ccmd = client.config.cmd
       if type(ccmd) == 'table' then
@@ -62,6 +64,7 @@ local function check_active_clients()
       end
       report_info(table.concat({
         string.format('%s (id: %d)', client.name, client.id),
+        string.format('- Version: %s', server_version),
         dirs_info,
         string.format('- Command: %s', cmd),
         string.format('- Settings: %s', vim.inspect(client.settings, { newline = '\n  ' })),

runtime/plugin/man.lua

@@ -8,9 +8,9 @@ vim.api.nvim_create_user_command('Man', function(params)
   if params.bang then
     man.init_pager()
   else
-    local ok, err = pcall(man.open_page, params.count, params.smods, params.fargs)
-    if not ok then
-      vim.notify(man.errormsg or err, vim.log.levels.ERROR)
+    local err = man.open_page(params.count, params.smods, params.fargs)
+    if err then
+      vim.notify('man.lua: ' .. err, vim.log.levels.ERROR)
     end
   end
 end, {
@@ -31,6 +31,9 @@ vim.api.nvim_create_autocmd('BufReadCmd', {
   pattern = 'man://*',
   nested = true,
   callback = function(params)
-    require('man').read_page(vim.fn.matchstr(params.match, 'man://\\zs.*'))
+    local err = require('man').read_page(assert(params.match:match('man://(.*)')))
+    if err then
+      vim.notify('man.lua: ' .. err, vim.log.levels.ERROR)
+    end
   end,
 })

src/nvim/api/vimscript.c

@@ -229,10 +229,9 @@ static Object _call_function(String fn, Array args, dict_T *self, Arena *arena,
   funcexe.fe_selfdict = self;
 
   TRY_WRAP(err, {
-    // call_func() retval is deceptive, ignore it.  Instead we set `msg_list`
-    // (see above) to capture abort-causing non-exception errors.
-    call_func(fn.data, (int)fn.size, &rettv, (int)args.size,
-              vim_args, &funcexe);
+    // call_func() retval is deceptive, ignore it.  Instead TRY_WRAP sets `msg_list` to capture
+    // abort-causing non-exception errors.
+    (void)call_func(fn.data, (int)fn.size, &rettv, (int)args.size, vim_args, &funcexe);
   });
 
   if (!ERROR_SET(err)) {
@@ -280,18 +279,23 @@ Object nvim_call_dict_function(Object dict, String fn, Array args, Arena *arena,
   typval_T rettv;
   bool mustfree = false;
   switch (dict.type) {
-  case kObjectTypeString:
+  case kObjectTypeString: {
+    int eval_ret;
     TRY_WRAP(err, {
-      eval0(dict.data.string.data, &rettv, NULL, &EVALARG_EVALUATE);
-      clear_evalarg(&EVALARG_EVALUATE, NULL);
-    });
+        eval_ret = eval0(dict.data.string.data, &rettv, NULL, &EVALARG_EVALUATE);
+        clear_evalarg(&EVALARG_EVALUATE, NULL);
+      });
     if (ERROR_SET(err)) {
       return rv;
     }
+    if (eval_ret != OK) {
+      abort();  // Should not happen.
+    }
     // Evaluation of the string arg created a new dict or increased the
     // refcount of a dict. Not necessary for a RPC dict.
     mustfree = true;
     break;
+  }
   case kObjectTypeDict:
     object_to_vim(dict, &rettv, err);
     break;

src/nvim/drawline.c

@@ -31,6 +31,7 @@
 #include "nvim/highlight_defs.h"
 #include "nvim/highlight_group.h"
 #include "nvim/indent.h"
+#include "nvim/insexpand.h"
 #include "nvim/mark_defs.h"
 #include "nvim/marktree_defs.h"
 #include "nvim/match.h"
@@ -934,6 +935,7 @@ int win_line(win_T *wp, linenr_T lnum, int startrow, int endrow, int col_rows, s
   colnr_T vcol_prev = -1;             // "wlv.vcol" of previous character
   ScreenGrid *grid = &wp->w_grid;     // grid specific to the window
 
+  const bool in_curline = wp == curwin && lnum == curwin->w_cursor.lnum;
   const bool has_fold = foldinfo.fi_level != 0 && foldinfo.fi_lines > 0;
   const bool has_foldtext = has_fold && *wp->w_p_fdt != NUL;
 
@@ -1117,7 +1119,7 @@ int win_line(win_T *wp, linenr_T lnum, int startrow, int endrow, int col_rows, s
       }
 
       // Check if the char under the cursor should be inverted (highlighted).
-      if (!highlight_match && lnum == curwin->w_cursor.lnum && wp == curwin
+      if (!highlight_match && in_curline
           && cursor_is_block_during_visual(*p_sel == 'e')) {
         noinvcur = true;
       }
@@ -1629,8 +1631,7 @@ int win_line(win_T *wp, linenr_T lnum, int startrow, int endrow, int col_rows, s
     }
 
     // When still displaying '$' of change command, stop at cursor.
-    if (dollar_vcol >= 0 && wp == curwin
-        && lnum == wp->w_cursor.lnum && wlv.vcol >= wp->w_virtcol) {
+    if (dollar_vcol >= 0 && in_curline && wlv.vcol >= wp->w_virtcol) {
       draw_virt_text(wp, buf, win_col_offset, &wlv.col, wlv.row);
       // don't clear anything after wlv.col
       wlv_put_linebuf(wp, &wlv, wlv.col, false, bg_attr, 0);
@@ -1786,6 +1787,16 @@ int win_line(win_T *wp, linenr_T lnum, int startrow, int endrow, int col_rows, s
       wlv.char_attr = hl_combine_attr(char_attr_base, char_attr_pri);
     }
 
+    // Apply ComplMatchIns highlight if needed.
+    if (wlv.filler_todo <= 0
+        && (State & MODE_INSERT) && in_curline && ins_compl_active()) {
+      int ins_match_attr = ins_compl_col_range_attr((int)(ptr - line));
+      if (ins_match_attr > 0) {
+        char_attr_pri = hl_combine_attr(char_attr_pri, ins_match_attr);
+        wlv.char_attr = hl_combine_attr(char_attr_base, char_attr_pri);
+      }
+    }
+
     if (draw_folded && has_foldtext && wlv.n_extra == 0 && wlv.col == win_col_offset) {
       const int v = (int)(ptr - line);
       linenr_T lnume = lnum + foldinfo.fi_lines - 1;
@@ -2446,8 +2457,7 @@ int win_line(win_T *wp, linenr_T lnum, int startrow, int endrow, int col_rows, s
     // With 'virtualedit' we may never reach cursor position, but we still
     // need to correct the cursor column, so do that at end of line.
     if (!did_wcol && wlv.filler_todo <= 0
-        && wp == curwin && lnum == wp->w_cursor.lnum
-        && conceal_cursor_line(wp)
+        && in_curline && conceal_cursor_line(wp)
         && (wlv.vcol + wlv.skip_cells >= wp->w_virtcol || mb_schar == NUL)) {
       wp->w_wcol = wlv.col - wlv.boguscols;
       if (wlv.vcol + wlv.skip_cells < wp->w_virtcol) {
@@ -2640,7 +2650,7 @@ int win_line(win_T *wp, linenr_T lnum, int startrow, int endrow, int col_rows, s
 
       // Update w_cline_height and w_cline_folded if the cursor line was
       // updated (saves a call to plines_win() later).
-      if (wp == curwin && lnum == curwin->w_cursor.lnum) {
+      if (in_curline) {
         curwin->w_cline_row = startrow;
         curwin->w_cline_height = wlv.row - startrow;
         curwin->w_cline_folded = has_fold;

src/nvim/highlight_group.c

@@ -173,6 +173,7 @@ static const char *highlight_init_both[] = {
   "default link PmenuKind        Pmenu",
   "default link PmenuKindSel     PmenuSel",
   "default link PmenuSbar        Pmenu",
+  "default link ComplMatchIns    Normal",
   "default link Substitute       Search",
   "default link StatusLineTerm   StatusLine",
   "default link StatusLineTermNC StatusLineNC",

src/nvim/insexpand.c

@@ -256,6 +256,7 @@ static pos_T compl_startpos;
 static int compl_length = 0;
 static colnr_T compl_col = 0;           ///< column where the text starts
                                         ///< that is being completed
+static colnr_T compl_ins_end_col = 0;
 static char *compl_orig_text = NULL;    ///< text as it was before
                                         ///< completion started
 /// Undo information to restore extmarks for original text.
@@ -282,6 +283,11 @@ static size_t spell_bad_len = 0;   // length of located bad word
 
 static int compl_selected_item = -1;
 
+// "compl_match_array" points the currently displayed list of entries in the
+// popup menu.  It is NULL when there is no popup menu.
+static pumitem_T *compl_match_array = NULL;
+static int compl_match_arraysize;
+
 /// CTRL-X pressed in Insert mode.
 void ins_ctrl_x(void)
 {
@@ -943,6 +949,30 @@ static bool ins_compl_equal(compl_T *match, char *str, size_t len)
   return strncmp(match->cp_str, str, len) == 0;
 }
 
+/// when len is -1 mean use whole length of p otherwise part of p
+static void ins_compl_insert_bytes(char *p, int len)
+  FUNC_ATTR_NONNULL_ALL
+{
+  if (len == -1) {
+    len = (int)strlen(p);
+  }
+  assert(len >= 0);
+  ins_bytes_len(p, (size_t)len);
+  compl_ins_end_col = curwin->w_cursor.col - 1;
+}
+
+/// Checks if the column is within the currently inserted completion text
+/// column range. If it is, it returns a special highlight attribute.
+/// -1 mean normal item.
+int ins_compl_col_range_attr(int col)
+{
+  if (col >= compl_col && col < compl_ins_end_col) {
+    return syn_name2attr("ComplMatchIns");
+  }
+
+  return -1;
+}
+
 /// Reduce the longest common string for match "match".
 static void ins_compl_longest_match(compl_T *match)
 {
@@ -952,7 +982,7 @@ static void ins_compl_longest_match(compl_T *match)
 
     bool had_match = (curwin->w_cursor.col > compl_col);
     ins_compl_delete(false);
-    ins_bytes(compl_leader + get_compl_len());
+    ins_compl_insert_bytes(compl_leader + get_compl_len(), -1);
     ins_redraw(false);
 
     // When the match isn't there (to avoid matching itself) remove it
@@ -986,7 +1016,7 @@ static void ins_compl_longest_match(compl_T *match)
     *p = NUL;
     bool had_match = (curwin->w_cursor.col > compl_col);
     ins_compl_delete(false);
-    ins_bytes(compl_leader + get_compl_len());
+    ins_compl_insert_bytes(compl_leader + get_compl_len(), -1);
     ins_redraw(false);
 
     // When the match isn't there (to avoid matching itself) remove it
@@ -1058,11 +1088,6 @@ unsigned get_cot_flags(void)
   return curbuf->b_cot_flags != 0 ? curbuf->b_cot_flags : cot_flags;
 }
 
-/// "compl_match_array" points the currently displayed list of entries in the
-/// popup menu.  It is NULL when there is no popup menu.
-static pumitem_T *compl_match_array = NULL;
-static int compl_match_arraysize;
-
 /// Remove any popup menu.
 static void ins_compl_del_pum(void)
 {
@@ -1678,6 +1703,7 @@ void ins_compl_clear(void)
   compl_cont_status = 0;
   compl_started = false;
   compl_matches = 0;
+  compl_ins_end_col = 0;
   XFREE_CLEAR(compl_pattern);
   compl_patternlen = 0;
   XFREE_CLEAR(compl_leader);
@@ -1802,7 +1828,7 @@ static void ins_compl_new_leader(void)
 {
   ins_compl_del_pum();
   ins_compl_delete(true);
-  ins_bytes(compl_leader + get_compl_len());
+  ins_compl_insert_bytes(compl_leader + get_compl_len(), -1);
   compl_used_match = false;
 
   if (compl_started) {
@@ -2137,7 +2163,7 @@ static bool ins_compl_stop(const int c, const int prev_mode, bool retval)
       const int compl_len = get_compl_len();
       const int len = (int)strlen(p);
       if (len > compl_len) {
-        ins_bytes_len(p + compl_len, (size_t)(len - compl_len));
+        ins_compl_insert_bytes(p + compl_len, len - compl_len);
       }
     }
     restore_orig_extmarks();
@@ -3639,7 +3665,7 @@ void ins_compl_insert(bool in_compl_func)
   // Make sure we don't go over the end of the string, this can happen with
   // illegal bytes.
   if (compl_len < (int)strlen(compl_shown_match->cp_str)) {
-    ins_bytes(compl_shown_match->cp_str + compl_len);
+    ins_compl_insert_bytes(compl_shown_match->cp_str + compl_len, -1);
   }
   compl_used_match = !match_at_original_text(compl_shown_match);
 
@@ -3888,14 +3914,15 @@ static int ins_compl_next(bool allow_get_expansion, int count, bool insert_match
 
   // Insert the text of the new completion, or the compl_leader.
   if (compl_no_insert && !started) {
-    ins_bytes(compl_orig_text + get_compl_len());
+    ins_compl_insert_bytes(compl_orig_text + get_compl_len(), -1);
     compl_used_match = false;
     restore_orig_extmarks();
   } else if (insert_match) {
     if (!compl_get_longest || compl_used_match) {
       ins_compl_insert(in_compl_func);
     } else {
-      ins_bytes(compl_leader + get_compl_len());
+      assert(compl_leader != NULL);
+      ins_compl_insert_bytes(compl_leader + get_compl_len(), -1);
     }
     if (!strcmp(compl_curr_match->cp_str, compl_orig_text)) {
       restore_orig_extmarks();

src/nvim/terminal.c

@@ -641,9 +641,6 @@ bool terminal_enter(void)
   curwin->w_p_so = 0;
   curwin->w_p_siso = 0;
 
-  // Save the existing cursor entry since it may be modified by the application
-  cursorentry_T save_cursorentry = shape_table[SHAPE_IDX_TERM];
-
   // Update the cursor shape table and flush changes to the UI
   s->term->pending.cursor = true;
   refresh_cursor(s->term);
@@ -674,8 +671,8 @@ bool terminal_enter(void)
   RedrawingDisabled = s->save_rd;
   apply_autocmds(EVENT_TERMLEAVE, NULL, NULL, false, curbuf);
 
-  shape_table[SHAPE_IDX_TERM] = save_cursorentry;
-  ui_mode_info_set();
+  // Restore the terminal cursor to what is set in 'guicursor'
+  (void)parse_shape_opt(SHAPE_CURSOR);
 
   if (save_curwin == curwin->handle) {  // Else: window was closed.
     curwin->w_p_cul = save_w_p_cul;

src/nvim/textformat.c

@@ -35,6 +35,7 @@
 #include "nvim/strings.h"
 #include "nvim/textformat.h"
 #include "nvim/textobject.h"
+#include "nvim/ui.h"
 #include "nvim/undo.h"
 #include "nvim/vim_defs.h"
 #include "nvim/window.h"
@@ -1049,12 +1050,18 @@ void format_lines(linenr_T line_count, bool avoid_fex)
         State = MODE_INSERT;         // for open_line()
         smd_save = p_smd;
         p_smd = false;
+
         insertchar(NUL, INSCHAR_FORMAT
                    + (do_comments ? INSCHAR_DO_COM : 0)
                    + (do_comments && do_comments_list ? INSCHAR_COM_LIST : 0)
                    + (avoid_fex ? INSCHAR_NO_FEX : 0), second_indent);
+
         State = old_State;
         p_smd = smd_save;
+        // Cursor shape may have been updated (e.g. by :normal) in insertchar(),
+        // so it needs to be updated here.
+        ui_cursor_shape();
+
         second_indent = -1;
         // at end of par.: need to set indent of next par.
         need_set_indent = is_end_par;

test/functional/plugin/lsp_spec.lua

@@ -1854,6 +1854,20 @@ describe('LSP', function()
         end,
       }
     end)
+
+    it('vim.lsp.start when existing client has no workspace_folders', function()
+      exec_lua(create_server_definition)
+      eq(
+        { 2, 'foo', 'foo' },
+        exec_lua(function()
+          local server = _G._create_server()
+          vim.lsp.start { cmd = server.cmd, name = 'foo' }
+          vim.lsp.start { cmd = server.cmd, name = 'foo', root_dir = 'bar' }
+          local foos = vim.lsp.get_clients()
+          return { #foos, foos[1].name, foos[2].name }
+        end)
+      )
+    end)
   end)
 
   describe('parsing tests', function()

test/functional/plugin/man_spec.lua

@@ -21,13 +21,12 @@ local function get_search_history(name)
     local man = require('man')
     local res = {}
     --- @diagnostic disable-next-line:duplicate-set-field
-    man.find_path = function(sect, name0)
+    man._find_path = function(name0, sect)
       table.insert(res, { sect, name0 })
       return nil
     end
-    local ok, rv = pcall(man.open_page, -1, { tab = 0 }, args)
-    assert(not ok)
-    assert(rv and rv:match('no manual entry'))
+    local err = man.open_page(-1, { tab = 0 }, args)
+    assert(err and err:match('no manual entry'))
     return res
   end)
 end
@@ -225,7 +224,7 @@ describe(':Man', function()
     matches('^/.+', actual_file)
     local args = { nvim_prog, '--headless', '+:Man ' .. actual_file, '+q' }
     matches(
-      ('Error detected while processing command line:\r\n' .. 'man.lua: "no manual entry for %s"'):format(
+      ('Error detected while processing command line:\r\n' .. 'man.lua: no manual entry for %s'):format(
         pesc(actual_file)
       ),
       fn.system(args, { '' })
@@ -235,8 +234,8 @@ describe(':Man', function()
 
   it('tries variants with spaces, underscores #22503', function()
     eq({
-      { '', 'NAME WITH SPACES' },
-      { '', 'NAME_WITH_SPACES' },
+      { vim.NIL, 'NAME WITH SPACES' },
+      { vim.NIL, 'NAME_WITH_SPACES' },
     }, get_search_history('NAME WITH SPACES'))
     eq({
       { '3', 'some other man' },
@@ -255,8 +254,8 @@ describe(':Man', function()
       { 'n', 'some_other_man' },
     }, get_search_history('n some other man'))
     eq({
-      { '', '123some other man' },
-      { '', '123some_other_man' },
+      { vim.NIL, '123some other man' },
+      { vim.NIL, '123some_other_man' },
     }, get_search_history('123some other man'))
     eq({
       { '1', 'other_man' },
@@ -265,11 +264,10 @@ describe(':Man', function()
   end)
 
   it('can complete', function()
-    t.skip(t.is_os('mac') and t.is_arch('x86_64'), 'not supported on intel mac')
     eq(
       true,
       exec_lua(function()
-        return #require('man').man_complete('f', 'Man g') > 0
+        return #require('man').man_complete('f', 'Man f') > 0
       end)
     )
   end)

test/functional/terminal/cursor_spec.lua

@@ -15,9 +15,20 @@ local skip = t.skip
 describe(':terminal cursor', function()
   local screen
 
+  local terminal_mode_idx ---@type number
+
   before_each(function()
     clear()
     screen = tt.setup_screen()
+
+    if terminal_mode_idx == nil then
+      for i, v in ipairs(screen._mode_info) do
+        if v.name == 'terminal' then
+          terminal_mode_idx = i
+        end
+      end
+      assert(terminal_mode_idx)
+    end
   end)
 
   it('moves the screen cursor when focused', function()
@@ -143,13 +154,6 @@ describe(':terminal cursor', function()
 
   it('can be modified by application #3681', function()
     skip(is_os('win'), '#31587')
-    local idx ---@type number
-    for i, v in ipairs(screen._mode_info) do
-      if v.name == 'terminal' then
-        idx = i
-      end
-    end
-    assert(idx)
 
     local states = {
       [1] = { blink = true, shape = 'block' },
@@ -171,13 +175,13 @@ describe(':terminal cursor', function()
       ]],
         condition = function()
           if v.blink then
-            eq(500, screen._mode_info[idx].blinkon)
-            eq(500, screen._mode_info[idx].blinkoff)
+            eq(500, screen._mode_info[terminal_mode_idx].blinkon)
+            eq(500, screen._mode_info[terminal_mode_idx].blinkoff)
           else
-            eq(0, screen._mode_info[idx].blinkon)
-            eq(0, screen._mode_info[idx].blinkoff)
+            eq(0, screen._mode_info[terminal_mode_idx].blinkon)
+            eq(0, screen._mode_info[terminal_mode_idx].blinkoff)
           end
-          eq(v.shape, screen._mode_info[idx].cursor_shape)
+          eq(v.shape, screen._mode_info[terminal_mode_idx].cursor_shape)
         end,
       })
     end
@@ -191,20 +195,13 @@ describe(':terminal cursor', function()
     ]])
 
     -- Cursor returns to default on TermLeave
-    eq(500, screen._mode_info[idx].blinkon)
-    eq(500, screen._mode_info[idx].blinkoff)
-    eq('block', screen._mode_info[idx].cursor_shape)
+    eq(500, screen._mode_info[terminal_mode_idx].blinkon)
+    eq(500, screen._mode_info[terminal_mode_idx].blinkoff)
+    eq('block', screen._mode_info[terminal_mode_idx].cursor_shape)
   end)
 
   it('can be modified per terminal', function()
     skip(is_os('win'), '#31587')
-    local idx ---@type number
-    for i, v in ipairs(screen._mode_info) do
-      if v.name == 'terminal' then
-        idx = i
-      end
-    end
-    assert(idx)
 
     -- Set cursor to vertical bar with blink
     tt.feed_csi('5 q')
@@ -216,9 +213,9 @@ describe(':terminal cursor', function()
       {3:-- TERMINAL --}                                    |
     ]],
       condition = function()
-        eq(500, screen._mode_info[idx].blinkon)
-        eq(500, screen._mode_info[idx].blinkoff)
-        eq('vertical', screen._mode_info[idx].cursor_shape)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkon)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkoff)
+        eq('vertical', screen._mode_info[terminal_mode_idx].cursor_shape)
       end,
     })
 
@@ -231,9 +228,9 @@ describe(':terminal cursor', function()
       {3:-- TERMINAL --}                                    |
     ]],
       condition = function()
-        eq(500, screen._mode_info[idx].blinkon)
-        eq(500, screen._mode_info[idx].blinkoff)
-        eq('vertical', screen._mode_info[idx].cursor_shape)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkon)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkoff)
+        eq('vertical', screen._mode_info[terminal_mode_idx].cursor_shape)
       end,
     })
 
@@ -256,9 +253,9 @@ describe(':terminal cursor', function()
     ]],
       condition = function()
         -- New terminal, cursor resets to defaults
-        eq(500, screen._mode_info[idx].blinkon)
-        eq(500, screen._mode_info[idx].blinkoff)
-        eq('block', screen._mode_info[idx].cursor_shape)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkon)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkoff)
+        eq('block', screen._mode_info[terminal_mode_idx].cursor_shape)
       end,
     })
 
@@ -275,9 +272,9 @@ describe(':terminal cursor', function()
       {3:-- TERMINAL --}                                    |
     ]],
       condition = function()
-        eq(0, screen._mode_info[idx].blinkon)
-        eq(0, screen._mode_info[idx].blinkoff)
-        eq('horizontal', screen._mode_info[idx].cursor_shape)
+        eq(0, screen._mode_info[terminal_mode_idx].blinkon)
+        eq(0, screen._mode_info[terminal_mode_idx].blinkoff)
+        eq('horizontal', screen._mode_info[terminal_mode_idx].cursor_shape)
       end,
     })
 
@@ -294,9 +291,9 @@ describe(':terminal cursor', function()
       {3:-- TERMINAL --}                                    |
     ]],
       condition = function()
-        eq(500, screen._mode_info[idx].blinkon)
-        eq(500, screen._mode_info[idx].blinkoff)
-        eq('vertical', screen._mode_info[idx].cursor_shape)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkon)
+        eq(500, screen._mode_info[terminal_mode_idx].blinkoff)
+        eq('vertical', screen._mode_info[terminal_mode_idx].cursor_shape)
       end,
     })
   end)
@@ -326,6 +323,32 @@ describe(':terminal cursor', function()
       {3:-- TERMINAL --}                                    |
     ]])
   end)
+
+  it('preserves guicursor value on TermLeave #31612', function()
+    eq(3, screen._mode_info[terminal_mode_idx].hl_id)
+
+    -- Change 'guicursor' while terminal mode is active
+    command('set guicursor+=t:Error')
+
+    local error_hl_id = call('hlID', 'Error')
+
+    screen:expect({
+      condition = function()
+        eq(error_hl_id, screen._mode_info[terminal_mode_idx].hl_id)
+      end,
+    })
+
+    -- Exit terminal mode
+    feed([[<C-\><C-N>]])
+
+    screen:expect([[
+      tty ready                                         |
+      ^                                                  |
+                                                        |*5
+    ]])
+
+    eq(error_hl_id, screen._mode_info[terminal_mode_idx].hl_id)
+  end)
 end)
 
 describe('buffer cursor position is correct in terminal without number column', function()

test/functional/ui/mode_spec.lua

@@ -94,6 +94,46 @@ describe('ui mode_change event', function()
     }
   end)
 
+  -- oldtest: Test_indent_norm_with_gq()
+  it('is restored to Normal mode after "gq" indents using :normal #12309', function()
+    screen:try_resize(60, 6)
+    n.exec([[
+      func Indent()
+        exe "normal! \<Ignore>"
+        return 0
+      endfunc
+
+      setlocal indentexpr=Indent()
+      call setline(1, [repeat('a', 80), repeat('b', 80)])
+    ]])
+
+    feed('ggVG')
+    screen:expect {
+      grid = [[
+      {17:aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa}|
+      {17:aaaaaaaaaaaaaaaaaaaa}                                        |
+      ^b{17:bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb}|
+      {17:bbbbbbbbbbbbbbbbbbbb}                                        |
+      {1:~                                                           }|
+      {5:-- VISUAL LINE --}                                           |
+    ]],
+      mode = 'visual',
+    }
+
+    feed('gq')
+    screen:expect {
+      grid = [[
+      aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa|
+      aaaaaaaaaaaaaaaaaaaa                                        |
+      ^bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb|
+      bbbbbbbbbbbbbbbbbbbb                                        |
+      {1:~                                                           }|
+                                                                  |
+    ]],
+      mode = 'normal',
+    }
+  end)
+
   it('works in insert mode', function()
     feed('i')
     screen:expect {

test/functional/ui/popupmenu_spec.lua

@@ -5561,6 +5561,71 @@ describe('builtin popupmenu', function()
         ]])
         feed('<C-E><ESC>')
       end)
+
+      -- oldtest: Test_pum_matchins_highlight()
+      it('with ComplMatchIns highlight', function()
+        exec([[
+          func Omni_test(findstart, base)
+            if a:findstart
+              return col(".")
+            endif
+            return [#{word: "foo"}, #{word: "bar"}, #{word: "你好"}]
+          endfunc
+          set omnifunc=Omni_test
+          hi ComplMatchIns guifg=red
+        ]])
+
+        feed('Sαβγ <C-X><C-O>')
+        screen:expect([[
+          αβγ {8:foo}^                         |
+          {1:~  }{s: foo            }{1:             }|
+          {1:~  }{n: bar            }{1:             }|
+          {1:~  }{n: 你好           }{1:             }|
+          {1:~                               }|*15
+          {2:-- }{5:match 1 of 3}                 |
+        ]])
+        feed('<C-E><Esc>')
+
+        feed('Sαβγ <C-X><C-O><C-N>')
+        screen:expect([[
+          αβγ {8:bar}^                         |
+          {1:~  }{n: foo            }{1:             }|
+          {1:~  }{s: bar            }{1:             }|
+          {1:~  }{n: 你好           }{1:             }|
+          {1:~                               }|*15
+          {2:-- }{5:match 2 of 3}                 |
+        ]])
+        feed('<C-E><Esc>')
+
+        feed('Sαβγ <C-X><C-O><C-N><C-N>')
+        screen:expect([[
+          αβγ {8:你好}^                        |
+          {1:~  }{n: foo            }{1:             }|
+          {1:~  }{n: bar            }{1:             }|
+          {1:~  }{s: 你好           }{1:             }|
+          {1:~                               }|*15
+          {2:-- }{5:match 3 of 3}                 |
+        ]])
+        feed('<C-E><Esc>')
+
+        -- restore after accept
+        feed('Sαβγ <C-X><C-O><C-Y>')
+        screen:expect([[
+          αβγ foo^                         |
+          {1:~                               }|*18
+          {2:-- INSERT --}                    |
+        ]])
+        feed('<Esc>')
+
+        -- restore after cancel completion
+        feed('Sαβγ <C-X><C-O><Space>')
+        screen:expect([[
+          αβγ foo ^                        |
+          {1:~                               }|*18
+          {2:-- INSERT --}                    |
+        ]])
+        feed('<Esc>')
+      end)
     end
   end
 

test/old/testdir/test_indent.vim

@@ -1,5 +1,8 @@
 " Test for various indent options
 
+source shared.vim
+source check.vim
+
 func Test_preserveindent()
   new
   " Test for autoindent copying indent from the previous line
@@ -303,4 +306,50 @@ func Test_indent_overflow_count2()
   close!
 endfunc
 
+" Test that mouse shape is restored to Normal mode after using "gq" when
+" 'indentexpr' executes :normal.
+func Test_indent_norm_with_gq()
+  CheckFeature mouseshape
+  CheckCanRunGui
+
+  let lines =<< trim END
+    func Indent()
+      exe "normal! \<Ignore>"
+      return 0
+    endfunc
+
+    setlocal indentexpr=Indent()
+  END
+  call writefile(lines, 'Xindentexpr.vim', 'D')
+
+  let lines =<< trim END
+    vim9script
+    var mouse_shapes = []
+
+    setline(1, [repeat('a', 80), repeat('b', 80)])
+
+    feedkeys('ggVG')
+    timer_start(50, (_) => {
+      mouse_shapes += [getmouseshape()]
+      timer_start(50, (_) => {
+        feedkeys('gq')
+        timer_start(50, (_) => {
+          mouse_shapes += [getmouseshape()]
+          timer_start(50, (_) => {
+            writefile(mouse_shapes, 'Xmouseshapes')
+            quit!
+          })
+        })
+      })
+    })
+  END
+  call writefile(lines, 'Xmouseshape.vim', 'D')
+
+  call RunVim([], [], "-g -S Xindentexpr.vim -S Xmouseshape.vim")
+  call WaitForAssert({-> assert_equal(['rightup-arrow', 'arrow'],
+        \ readfile('Xmouseshapes'))}, 300)
+
+  call delete('Xmouseshapes')
+endfunc
+
 " vim: shiftwidth=2 sts=2 expandtab

test/old/testdir/test_popup.vim

@@ -1713,4 +1713,49 @@ func Test_pum_keep_select()
   call StopVimInTerminal(buf)
 endfunc
 
+func Test_pum_matchins_highlight()
+  CheckScreendump
+  let lines =<< trim END
+    func Omni_test(findstart, base)
+      if a:findstart
+        return col(".")
+      endif
+      return [#{word: "foo"}, #{word: "bar"}, #{word: "你好"}]
+    endfunc
+    set omnifunc=Omni_test
+    hi ComplMatchIns ctermfg=red
+  END
+  call writefile(lines, 'Xscript', 'D')
+  let buf = RunVimInTerminal('-S Xscript', {})
+
+  call TermWait(buf)
+  call term_sendkeys(buf, "Sαβγ \<C-X>\<C-O>")
+  call VerifyScreenDump(buf, 'Test_pum_matchins_01', {})
+  call term_sendkeys(buf, "\<C-E>\<Esc>")
+
+  call TermWait(buf)
+  call term_sendkeys(buf, "Sαβγ \<C-X>\<C-O>\<C-N>")
+  call VerifyScreenDump(buf, 'Test_pum_matchins_02', {})
+  call term_sendkeys(buf, "\<C-E>\<Esc>")
+
+  call TermWait(buf)
+  call term_sendkeys(buf, "Sαβγ \<C-X>\<C-O>\<C-N>\<C-N>")
+  call VerifyScreenDump(buf, 'Test_pum_matchins_03', {})
+  call term_sendkeys(buf, "\<C-E>\<Esc>")
+
+  " restore after accept
+  call TermWait(buf)
+  call term_sendkeys(buf, "Sαβγ \<C-X>\<C-O>\<C-Y>")
+  call VerifyScreenDump(buf, 'Test_pum_matchins_04', {})
+  call term_sendkeys(buf, "\<C-E>\<Esc>")
+
+  " restore after cancel completion
+  call TermWait(buf)
+  call term_sendkeys(buf, "Sαβγ \<C-X>\<C-O>\<Space>")
+  call VerifyScreenDump(buf, 'Test_pum_matchins_05', {})
+  call term_sendkeys(buf, "\<C-E>\<Esc>")
+
+  call StopVimInTerminal(buf)
+endfunc
+
 " vim: shiftwidth=2 sts=2 expandtab

test/old/testdir/test_preview.vim

@@ -59,7 +59,8 @@ func Test_window_preview_terminal()
   CheckFeature quickfix
   " CheckFeature terminal
 
-  term " ++curwin
+  " term ++curwin
+  term
   const buf_num = bufnr('$')
   call assert_equal(1, winnr('$'))
   exe 'pbuffer' . buf_num