Merge 551cb8712f into 38f554e9c4

Co-authored-by: Axel <axelhjq@gmail.com>
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Co-authored-by: Juan Giordana <juangiordana@gmail.com>
Co-authored-by: Yochem van Rosmalen <git@yochem.nl>
Co-authored-by: ifish <fishioon@live.com>

BUILD.md

@@ -131,7 +131,8 @@ https://github.com/cascent/neovim-cygwin was built on Cygwin 2.9.0. Newer `libuv
 1. From the MSYS2 shell, install these packages:
    ```
    pacman -S \
-       mingw-w64-ucrt-x86_64-{gcc,cmake,make,ninja,diffutils}
+       mingw-w64-ucrt-x86_64-gcc \
+       mingw-w64-x86_64-{cmake,make,ninja,diffutils}
    ```
 2. From the Windows Command Prompt (`cmd.exe`), set up the `PATH` and build.
 
@@ -292,13 +293,13 @@ Platform-specific requirements are listed below.
 ### Ubuntu / Debian
 
 ```sh
-sudo apt-get install ninja-build gettext cmake unzip curl build-essential
+sudo apt-get install ninja-build gettext cmake curl build-essential
 ```
 
 ### RHEL / Fedora
 
 ```
-sudo dnf -y install ninja-build cmake gcc make unzip gettext curl glibc-gconv-extra
+sudo dnf -y install ninja-build cmake gcc make gettext curl glibc-gconv-extra
 ```
 
 ### openSUSE
@@ -310,13 +311,13 @@ sudo zypper install ninja cmake gcc-c++ gettext-tools curl
 ### Arch Linux
 
 ```
-sudo pacman -S base-devel cmake unzip ninja curl
+sudo pacman -S base-devel cmake ninja curl
 ```
 
 ### Alpine Linux
 
 ```
-apk add build-base cmake coreutils curl unzip gettext-tiny-dev
+apk add build-base cmake coreutils curl gettext-tiny-dev
 ```
 
 ### Void Linux
@@ -380,7 +381,7 @@ or a specific SHA1 like `--override-input neovim-src github:neovim/neovim/89dc8f
 ### FreeBSD
 
 ```
-sudo pkg install cmake gmake sha unzip wget gettext curl
+sudo pkg install cmake gmake sha wget gettext curl
 ```
 
 If you get an error regarding a `sha256sum` mismatch, where the actual SHA-256 hash is `e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855`, then this is your issue (that's the `sha256sum` of an empty file).
@@ -388,7 +389,7 @@ If you get an error regarding a `sha256sum` mismatch, where the actual SHA-256 h
 ### OpenBSD
 
 ```sh
-doas pkg_add gmake cmake unzip curl gettext-tools
+doas pkg_add gmake cmake curl gettext-tools
 ```
 
 Build can sometimes fail when using the top level `Makefile`, apparently due to some third-party component (see [#2445-comment](https://github.com/neovim/neovim/issues/2445#issuecomment-108124236)). The following instructions use CMake:

Makefile

@@ -133,6 +133,9 @@ generated-sources benchmark $(FORMAT) $(LINT) $(TEST) doc: | build/.ran-cmake
 
 test: $(TEST)
 
+# iwyu-fix-includes can be downloaded from
+# https://github.com/include-what-you-use/include-what-you-use/blob/master/fix_includes.py.
+# Create a iwyu-fix-includes shell script in your $PATH that invokes the python script.
 iwyu: build/.ran-cmake
 	$(CMAKE) --preset iwyu
 	$(CMAKE) --build build > build/iwyu.log

runtime/doc/lsp.txt

@@ -32,7 +32,7 @@ Follow these steps to get LSP features:
     Example: >lua
       vim.lsp.config['luals'] = {
         -- Command and arguments to start the server.
-        cmd = { 'lua-language-server' }
+        cmd = { 'lua-language-server' },
 
         -- Filetypes to automatically attach to.
         filetypes = { 'lua' },
@@ -97,7 +97,7 @@ Given: >lua
           multilineTokenSupport = true,
         }
       }
-    }
+    },
     root_markers = { '.git' },
   })
 
@@ -885,7 +885,7 @@ foldexpr({lnum})                                          *vim.lsp.foldexpr()*
 
     To use, check for the "textDocument/foldingRange" capability in an
     |LspAttach| autocommand. Example: >lua
-        vim.api.nvim_create_autocommand('LspAttach', {
+        vim.api.nvim_create_autocmd('LspAttach', {
           callback = function(args)
             local client = vim.lsp.get_client_by_id(args.data.client_id)
             if client:supports_method('textDocument/foldingRange') then

runtime/doc/options.txt

@@ -1560,8 +1560,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 		    "menu" or "menuone". No effect if "longest" is present.
 
 	   noselect Same as "noinsert", except that no menu item is
-		    pre-selected. If both "noinsert" and "noselect" are present,
+		    pre-selected. If both "noinsert" and "noselect" are
-		    "noselect" has precedence.
+		    present, "noselect" has precedence.
 
 	   fuzzy    Enable |fuzzy-matching| for completion candidates. This
 		    allows for more flexible and intuitive matching, where

runtime/doc/treesitter.txt

@@ -70,7 +70,7 @@ adds arbitrary metadata and conditional data to a match.
 
 Queries are written in a lisp-like language documented in
 https://tree-sitter.github.io/tree-sitter/using-parsers#query-syntax
-Note: The predicates listed there page differ from those Nvim supports. See
+Note: The predicates listed there differ from those Nvim supports. See
 |treesitter-predicates| for a complete list of predicates supported by Nvim.
 
 Nvim looks for queries as `*.scm` files in a `queries` directory under

runtime/lua/vim/_meta/options.lua

@@ -1087,8 +1087,8 @@ vim.go.cia = vim.go.completeitemalign
 --- 	    "menu" or "menuone". No effect if "longest" is present.
 ---
 ---    noselect Same as "noinsert", except that no menu item is
---- 	    pre-selected. If both "noinsert" and "noselect" are present,
+--- 	    pre-selected. If both "noinsert" and "noselect" are
---- 	    "noselect" has precedence.
+--- 	    present, "noselect" has precedence.
 ---
 ---    fuzzy    Enable `fuzzy-matching` for completion candidates. This
 --- 	    allows for more flexible and intuitive matching, where

runtime/lua/vim/lsp.lua

@@ -1379,7 +1379,7 @@ end
 --- |LspAttach| autocommand. Example:
 ---
 --- ```lua
---- vim.api.nvim_create_autocommand('LspAttach', {
+--- vim.api.nvim_create_autocmd('LspAttach', {
 ---   callback = function(args)
 ---     local client = vim.lsp.get_client_by_id(args.data.client_id)
 ---     if client:supports_method('textDocument/foldingRange') then

runtime/lua/vim/lsp/diagnostic.lua

@@ -208,7 +208,7 @@ end
 
 --- @param uri string
 --- @param client_id? integer
---- @param diagnostics vim.Diagnostic[]
+--- @param diagnostics lsp.Diagnostic[]
 --- @param is_pull boolean
 local function handle_diagnostics(uri, client_id, diagnostics, is_pull)
   local fname = vim.uri_to_fname(uri)

src/nvim/options.lua

@@ -1531,8 +1531,8 @@ return {
         	    "menu" or "menuone". No effect if "longest" is present.
 
            noselect Same as "noinsert", except that no menu item is
-        	    pre-selected. If both "noinsert" and "noselect" are present,
+        	    pre-selected. If both "noinsert" and "noselect" are
-        	    "noselect" has precedence.
+        	    present, "noselect" has precedence.
 
            fuzzy    Enable |fuzzy-matching| for completion candidates. This
         	    allows for more flexible and intuitive matching, where

src/nvim/window.c

@@ -6378,7 +6378,7 @@ void win_drag_vsep_line(win_T *dragwin, int offset)
     fr = curfr;  // put fr at window that grows
   }
 
-  // If not enough room thn move as far as we can
+  // If not enough room then move as far as we can
   offset = MIN(offset, room);
 
   // No room at all, quit.

test/unit/mbyte_spec.lua

@@ -58,11 +58,11 @@ describe('mbyte', function()
       lib.schar_get(buf, lib.utfc_ptr2schar(to_string(seq), firstc))
       local str = ffi.string(buf)
       if 1 > 2 then -- for debugging
-        local tabel = {}
+        local tbl = {}
         for i = 1, #str do
-          table.insert(tabel, string.format('0x%02x', string.byte(str, i)))
+          table.insert(tbl, string.format('0x%02x', string.byte(str, i)))
         end
-        print('{ ' .. table.concat(tabel, ', ') .. ' }')
+        print('{ ' .. table.concat(tbl, ', ') .. ' }')
         io.stdout:flush()
       end
       return { str, firstc[0] }

test/unit/vterm_spec.lua

@@ -1094,7 +1094,7 @@ describe('vterm', function()
     push('\x1b[0F', vt)
     cursor(0, 0, state)
 
-    -- Cursor Horizonal Absolute
+    -- Cursor Horizontal Absolute
     push('\n', vt)
     cursor(1, 0, state)
     push('\x1b[20G', vt)
@@ -3067,7 +3067,7 @@ describe('vterm', function()
       screen
     )
 
-    -- Outputing CJK doublewidth in 80th column should wraparound to next line and not crash"
+    -- Outputting CJK doublewidth in 80th column should wraparound to next line and not crash"
     reset(nil, screen)
     push('\x1b[80G\xEF\xBC\x90', vt)
     screen_cell(0, 79, '{} width=1 attrs={} fg=rgb(240,240,240) bg=rgb(0,0,0)', screen)