Problem: Contents of terminal buffer are not reflown when Nvim is
resized.
Solution: Enable reflow in libvterm by default. Now that libvterm is
vendored, also fix "TUI rapid resize" test failures there.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
According to :h win32-PATH, "the same directory as Vim" means the same
directory as the Vim executable, not Vim's current directory. In patch
8.2.4860 these two concepts were mixed up.
closes: vim/vim#154510cc5dce578
Problem: When preparing the parameters for a code actions LSP request,
the code set `context.diagnostics` when processing the first LSP client,
and then reused those `context.diagnostics` for subsequent LSP clients.
This meant that the second and next LSP clients got diagnostics that
did not originate from them, and they did not get the diagnostics that
they sent.
Solution: Avoid setting `context.diagnostics` (which is referenced by
all clients). Instead, set `params.context.diagnostics` directly, which
is specific to a single client.
Fixes#30001
Caused by #29501
Problem: some patterns are used as a replacement for several explicit
extension matches (like '%.[Ss][Yy][Ss]$', '%.php%d$', etc.).
They usually correspond to Vim's "ignore case" regexes (like
'*.sys\c') and "convenience" patterns to not define many of them (like
'*.php\d').
As matching extension directly is faster and more explicit, it should
be preferred.
Solution: move all such patterns to direct extension match.
Problem: some patterns are used as a replacement for one-two explicit
file matches (like '^[mM]akefile$'). As matching file name directly is
faster and more explicit, it should be preferred.
Solution: move those patterns to direct file name match.
NOTE: this is not strictly backwards compatible, because exact file
name matching is done *before* pattern matching. If user has
conflicting `vim.filetype.add()` call with high priority (like with
`pattern='file$'` and `priority=100`), after this change it will be
ignored (i.e. 'makefile' will match exactly).
Judging by converted cases, it seems reasonable to prefer exact
matches there.
Problem: filetype: goaccess config file not recognized
Solution: detect 'goaccess.conf' as goaccess filetype, also
include a basic syntax and ftplugin (Adam Monsen)
Add syntax highlighting for GoAccess configuration file.
GoAccess is a real-time web log analyzer and interactive viewer that
runs in a terminal in *nix systems or through your browser.
GoAccess home page: https://goaccess.iocloses: vim/vim#154140aa65b48fb
Co-authored-by: Adam Monsen <haircut@gmail.com>
`buf.code_action` always included diagnostics on a given line from all
clients. Servers should only receive diagnostics they published, and in
the exact same format they sent it.
Should fix https://github.com/neovim/neovim/issues/29500
inotifywait man page specifies:
The file must be specified with a relative or absolute path according to whether a relative or absolute path is given for watched directories.
So it would only work this way in case the path is relative (which at least for gopls it is not)
Problem:
Some language servers (e.g., rust-analyzer, texlab) are desynced when
the user deletes the entire contents of the buffer. This is due to the
discrepancy between how nvim computes diff and how nvim treats empty
buffer.
* diff: If the buffer became empty, then the diff includes the last
line's eol.
* empty buffer: Even if the buffer is empty, nvim regards it as having
a single empty line with eol.
Solution:
Add special case for diff computation when the buffer becomes empty so
that it does not include the eol of the last line.
Problem: CompletionItem in lsp spec mentioned the deprecated attribute
Solution: when item has deprecated attribute set hl_group to DiagnosticDeprecated
in complete function
**Problem:** With anonymous nodes toggled in the inspect tree, only
named nodes will be highlighted when moving the cursor in the source
code buffer.
**Solution:** Retrieve the anonymous node at the cursor (when toggled on
in the inspect tree) and highlight them when appropriate, for better
clarity/specificity.
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem: filetype: SuperHTML template files not recognized
Solution: Update the filetype detection code to detect '*.shtml' either
as HTML (Server Side Includes) or SuperHTML (template files)
(EliSauder)
related: vim/vim#15355
related: vim/vim#15367e57c9a19ed
Co-authored-by: EliSauder <24995216+EliSauder@users.noreply.github.com>
Reverts https://github.com/neovim/neovim/pull/29212 and adds a few
additional test cases
From the spec
> All text edits ranges refer to positions in the document they are
> computed on. They therefore move a document from state S1 to S2 without
> describing any intermediate state. Text edits ranges must never overlap,
> that means no part of the original document must be manipulated by more
> than one edit. However, it is possible that multiple edits have the same
> start position: multiple inserts, or any number of inserts followed by a
> single remove or replace edit. If multiple inserts have the same
> position, the order in the array defines the order in which the inserted
> strings appear in the resulting text.
The previous fix seems wrong. The important part:
> If multiple inserts have the same position, the order in the array
> defines the order in which the inserted strings appear in the
> resulting text.
Emphasis on _appear in the resulting text_
Which means that in:
local edits1 = {
make_edit(0, 3, 0, 3, { 'World' }),
make_edit(0, 3, 0, 3, { 'Hello' }),
}
`World` must appear before `Hello` in the final text. That means the old
logic was correct, and the fix was wrong.
Problem: filetype: Make syntax highlighting off for MS Makefiles
Solution: Try to detect MS Makefiles and adjust syntax rules to it.
(Ken Takata)
Highlighting of variable expansion in Microsoft Makefile can be broken.
E.g.:
2979cfc262/src/Make_mvc.mak (L1331)
Don't use backslash as escape characters if `make_microsoft` is set.
Also fix that `make_no_comments` was not considered if `make_microsoft`
was set.
Also add description for `make_microsoft` and `make_no_comments` to the
documentation and include a very simple filetype test
closes: vim/vim#15341eb4b903c9b
Co-authored-by: Ken Takata <kentkt@csc.jp>
Fix the following two issues:
- pyenv root detection issue
When `PYENV_ROOT` environment variable is not set, neovim will detect
pyenv's root via `pyenv root` command, but which will be always fail
because `vim.fn.system()` returns result with additional `\n`. Using
`vim.system` instead prevents this problem. to trim it before check
whether it is exists
- python executable path detection issue
Filter unrelated `python-config` in cases where multiple python versions
are installed, e.g. `python-config`, `python3.10-config`,
`python3.11-config` etc.
Problem: filetype: OpenGL Shading Language files are not detected
Solution: detect various file extensions as GLSL filetype, include
indent and syntax script, do no longer recognize '*.comp'
as Mason filetype (Gregory Anders)
closes: vim/vim#15317e4b991ed36
Problem: pattern detection for Dracula language uses "*lvs" and "*lpe".
as there is no dot, those are not treated as extensions which
they should (judging by 'runtime/syntax/dracula.vim' and
common sense).
Solution: use "*.lvs" and "*.lpe" patterns (Evgeni Chasnovski)
closes: vim/vim#153035fb801a74f
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: calling `vim.filetype.match()` has performance bottleneck in
that it has to match a lot of Lua patterns against several versions of
input file name. This might be the problem if users need to call it
synchronously a lot of times.
Solution: add "parent pattern pre-matching" which can be used to quickly
reject several potential pattern matches at (usually rare) cost of
adding time for one extra Lua pattern match.
"Parent pattern" is a manually added/tracked grouping of filetype
patterns which should have two properties:
- Match at least the same set of strings as its filetype patterns.
But not too much more.
- Be fast to match.
For them to be effective, group should consist from at least three
filetype patterns.
Example: for a filetpye pattern ".*/etc/a2ps/.*%.cfg", both "/etc/"
and "%.cfg" are good parent patterns (prefer the one which can group
more filetype patterns).
After this commit, `vim.filetype.match()` on most inputs runs ~3.4
times faster (while some inputs may see less impact if they match
many parent patterns).
Problem: filetype: Debian devscripts config files are not recognized
Solution: detect devscripts.conf and .devscripts files as sh filetype
(sourced by /bin/sh)
closes: vim/vim#1522776c19028ff
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem:
When there are multiple inlay hints present at the same position, they
should be rendered in the order they are received in the response from
LSP as per the LSP spec. Currently, this is not respected.
Solution:
Gather all hints for a given position, and then set it in a single
extmark call instead of multiple set_extmark calls. This leads to fewer
extmark calls and correct inlay hints being rendered.
**Problem:** A query file for something like `html_tags` will not be
given html node completion
**Solution:** Check for parser aliases before offering completions
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem: filetype: Mediawiki files are not recognized
Solution: detect "*.mw" and "*.wiki" as mediawiki filetype,
include basic syntax and filetype plugins.
(AvidSeeker)
closes: vim/vim#15266b5844104ab
Co-authored-by: AvidSeeker <avidseeker7@protonmail.com>
Problem: ocaml runtime files are outdated
Solution: sync those files with the upstream repo,
detect a few more ocaml files
(Yinzuo Jiang)
closes: vim/vim#15260700cf8cfa1
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: filetype: *.pdf_tex files are not recognized
Solution: Detect '*.pdf_tex' files as tex filetype
(Jonas Dujava)
Those files are generated by inkscape, when exporting, see e.g.
https://inkscape.org/doc/inkscape-man.htmlcloses: vim/vim#1525028145e005d
Co-authored-by: Jonas Dujava <jonas.dujava@gmail.com>
Problem: due to single list of sorted patterns, their matching inside
`vim.filetype.match()` was done very similarly but with extra checks
to stop processing negative priority patterns before extensions.
Solution: create separated sorted lists for patterns with non-negative
and negative priorities. This allows to process them in a single
extracted function making the main codeflow a bit nicer and more
easily expandable.
Problem: filetype: angular ft detection is still problematic
(after 9.1.0551)
Solution: detect htmlangular filetype only by inspecting the content,
do not try to determine it from a generic name like
'*.component.html'
For the reasons mentioned here:
https://github.com/vim/vim/pull/13594#issuecomment-1834465890
related: vim/vim#15190
related: vim/vim#13594
related: vim/vim#13604c03f631b7b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: htmlangular files are not properly detected
Solution: Use the new htmlangular filetype for angular files, because
since angular v17, those are no longer valid HTML files.
(Dennis van den Berg)
Since Angular 17, the new Control Flow Syntax is not valid HTML. This PR
adds a new filetype detection for the HTML templates of Angular.
It first checks the filename. The Angular convention is to use
*.component.html for the template. However, this is not mandatory.
If the filename does not match, it will check the contents of the file
if it contains:
- One of the Control-Flow blocks: @if, @for, @switch, @defer
- A structural directive: *ngIf, *ngFor, *ngSwitch, *ngTemplateOutlet
- Builtin Angular elements: ng-template or ng-content
- String interpolation: {{ something }}
This enables the Angular LSP to attach only to htmlangular filetypes, as
well as language parsers, such as tree-sitter.
closes: vim/vim#151901ad194c0df
Co-authored-by: Dennis van den Berg <dennis.vandenberg@nedap.com>
Problem: filetype: antlr4 files are not recognized
Solution: Detect '*.g4' as antlr4 filetype, include a simple antlr4
syntax and filetype plugin (Yinzuo Jiang)
closes: vim/vim#151914a7a4a3675
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: No way to get the arity of a Vim function
(Austin Ziegler)
Solution: Enhance get() Vim script function to return the function
argument info using get(func, "arity") (LemonBoy)
fixes: vim/vim#15097closes: vim/vim#1510948b7d05a4f
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: `vim.filetype.match()` tries to match on contents even if there
is no contents (empty buffer or `{''}` explicit contents).
This results in extra avoidable execution duration for cases.
It matters, for example, when trying to match filetype based solely
on file name (which still needs `contents` or `buf` to properly match
earlier in the code path).
Solution: skip matching based solely on contents if it is `{''}`. This
works because:
- Matching solely on content is done after any user-configured
`vim.filetype.add()` hooks.
- All default matching on content might depend on supplied path
*only* if there is non-empty content (like in
`require('vim.filetype.detect').match_from_hashbang()`).
Problem:
Exiting the insert mode with ctrl-c does not trigger InsertLeave
autocmd. This may lead to nil error in treesitter foldexpr.
Solution:
Check nil. Folds still can be stale after exiting the insert mode with
ctrl-c, but it will be eventually updated correctly.
An alternative solution would be to ensure that exiting the insert mode
always triggers do_foldupdate. This can be done either by "fixing"
ctrl-c or with on_key callback that checks ctrl-c (nvim-cmp does this).
Problem: Unused assignment in sign_define_cmd()
Solution: Remove the assignment. Also document the "priority" flag of
sign_define(). (zeertzjq)
closes: vim/vim#15169fc3f5dba52
Problem: not possible to assign priority when defining a sign
(Mathias Fußenegger)
Solution: Add the priority argument for the :sign-define ex command and
the sign_define() function (LemonBoy)
Use the specified value instead of the default one (SIGN_DEF_PRIO) when
no priority is explicitly specified in sign_place or :sign place.
fixes: vim/vim#8334closes: vim/vim#15124b975ddfdf9
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: filetype: zone files are not recognized
(rpdprd)
Solution: Detect '*.zone' files as bindzone filetype
fixes: vim/vim#14222f095539b39
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: signed number detection for CTRL-X/A can be improved
(Chris Patuzzo)
Solution: Add the new "blank" value for the 'nrformat' setting. This
will make Vim assume a signed number only if there is a blank
in front of the sign.
(distobs)
fixes: vim/vim#15033closes: vim/vim#1511025ac6d67d9
Co-authored-by: distobs <cuppotatocake@gmail.com>
This patch replaces fswatch with inotifywait from inotify-toools:
https://github.com/inotify-tools/inotify-tools
fswatch takes ~1min to set up recursively for the Samba source code
directory. inotifywait needs less than a second to do the same thing.
https://github.com/emcrisostomo/fswatch/issues/321
Also it fswatch seems to be unmaintained in the meantime.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Problem: the code and docs for vim.diagnostic.JumpOpts.float send mixed
signals about what the default should be. When the option is first set,
in the global_diagnostic_options table, the comment clearly says that
the default is false. Later in the code, in goto_diagnostic, there's
a line that sets the default to true if no default is present. Finally,
the docs say that the default is true.
Solution: Change the docs to reflect the new default of false and fix
the goto_diagnostic function.
Problem:
Error when calling vim.treesitter.start() and vim.treesitter.stop() in
init.lua.
Solution:
Ensure syntaxset augroup exists after loading synload.vim.
Although the built-in pum completion mechanism will filter anyway on the
next input it is odd if the initial popup shows entries which don't
match the current prefix.
Using fuzzy match on the label/prefix is compatible with
`completeopt+=fuzzy` and also doesn't seem to break postfix snippet
cases
Closes https://github.com/neovim/neovim/issues/29287
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
Problem: with a single `context.options` there is no way for user to
force which scope (local, global, both) is being temporarily set and
later restored.
Solution: replace single `options` context with `bo`, `go`, `wo`, and
`o`. Naming and implementation follows how options can be set directly
with `vim.*` (like `vim.bo`, etc.).
Options are set for possible target `win` or `buf` context.
Problem: `vim._with()` has many different use cases which are not
covered with tests.
Solution: cover with tests. Some (many) test cases are intentionally
marked as "pending" because they cover cases which don't work as
expected at the moment (and fixing them requires specific knowledge of
C codebase). Use them as a reference for future fixes.
Also some of "can be nested" tests currently might pass only because
the tested context doesn't work.
Instead of looping over all captured nodes, just take the end range from
the last node in the list. This uses the fact that nodes returned by
iter_matches are ordered by their range (earlier to later).
Problem: Treesitter highlighter clears the already populated highlight
state when performing spell checking while drawing a
smoothscrolled topline.
Solution: Save and restore the highlight state in the highlighter's
_on_spell_nav callback.
Problem: filetype: .envrc & .prettierignore not recognized
Solution: Detect '.envrc' as shell and '.prettierignore' as gitignore
filetype (Tyler Miller)
Support ft detection for `.envrc` files used by direnv, and
`.prettierignore` files used by prettier.
closes: vim/vim#15053resolves: neovim/neovim#2940549012cd8c2
Co-authored-by: Tyler Miller <tmillr@proton.me>
Problem:
`o`-ing on a folded line opens the fold, because the new line gets the
fold level from the above line (level '='), which extends the fold to
the new line. `O` has a similar problem when run on the line below a
fold.
Solution:
Use -1 for the added line to get the lower level from the above/below
line.
Problem:
If there are errors in the last line of a buffer, something like `Gdk` or
`G2k3J` will produce an error (at least with `lua_ls`):
Error executing vim.schedule lua callback:
.../neovim/share/nvim/runtime/lua/vim/diagnostic.lua:1446: Invalid 'line': out of range
Solution:
Only set extmarks if the target buffer line still exists
Problem: A custom 'statuscolumn' needs to check a bunch of options and
placed signs to replicate the default number column.
Solution: Rework %l item to include the necessary logic to mimic the
default number column. Remove now redundant %r item.
Problem: Vim-script files may not be recognised
Solution: Add shebang line detection (Doug Kearns)
closes: vim/vim#150120d4d23dac0
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
When 'ignorecase' is set, the default keymap Q and Q would exit visual
mode.
This issue was raised in #28287 and a fix was applied in #28289.
However, `==` operator is subject to user `ignorecase` setting.
Solution:
Switching to `==#` operator would guarantee case sensitive comparison
between visual mode and linewise visual mode.
Co-authored-by: Kuanju Chen <kuanju.chen@mksinst.com>
Co-authored-by: Ilia Choly <ilia.choly@gmail.com>
Co-authored-by: Jose Pedro Oliveira <jose.p.oliveira.oss@gmail.com>
Co-authored-by: Maria José Solano <majosolano99@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem:
For snippets lsp.completion prefers the label if it is shorter than the
insertText or textEdit to support postfix completion cases but clangd
adds decoration characters to labels. E.g.: `•INT16_C(c)`
Solution:
Use parse_snippet on insertText/textEdit before checking if it is
shorter than the label.
Fixes https://github.com/neovim/neovim/issues/29301
This reduces the number of nil checks around buf_versions usage
Test changes were lifted from 5c33815
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
this only changes the error message, so that it is clear that
the error is with the LSP server, rather than being a crash inside
nvim runtime scripts. We are already doing a lot of validation,
it's just that nil was being overlooked here.
This fixes issue #27395
Problem: the previous documentation falsely states that "v" always
refers to the start of a visual area. In fact, the reference of "v" and
"." complement each other. If the cursor is at the start of
a (characterwise) visual area, then "v" refers to the end of the area.
Solution: be more verbose and explicit about the connection between "."
and "v" and also refer to |v_o| which many vim users will be familiar
with for visual areas.
210b39c2d6
Co-authored-by: Peter Aronoff <peter@aronoff.org>
This change fixes an issue where glob patterns like `{a,ab}` would not
match `ab` because the first option `a` matches, then the end of the
string is expected but `b` is found, and LPeg does not backtrack to try
the next option `ab` which would match. The fix here is to also append
the rest of the pattern to the generated LPeg pattern for each option.
This changes a glob `{a,ab}` from being parsed as
("a" or "ab") "end of string"
to
("a" "end of string" or "ab" "end of string")
Here, matching against `ab` would try the first option, fail to match,
then proceed to the next option, and match.
The sacrifice this change makes is dropping support for nested `{}`
conditions, which VSCode doesn't seem to support or test AFAICT.
Fixes#28931
Co-authored-by: Sergey Slipchenko <faergeek@gmail.com>
It's a function to perform operations in their own sealed context,
similar to pythons `with`. This helps ease operations where you need to
perform an operation in a specific context, and then restore the
context.
Marked as private for now as it's not ready for public use. The current
plan is to start using this internally so we can discover and fix any
problems. Once this is ready to be exposed it will be renamed to
`vim.with`.
Usage:
```lua
local ret = vim._with({context = val}, function()
return "hello"
end)
```
, where `context` is any combination of:
- `buf`
- `emsg_silent`
- `hide`
- `horizontal`
- `keepalt`
- `keepjumps`
- `keepmarks`
- `keeppatterns`
- `lockmarks`
- `noautocmd`
- `options`
- `sandbox`
- `silent`
- `unsilent`
- `win`
(except for `win` and `buf` which can't be used at the same time). This
list will most likely be expanded in the future.
Work on https://github.com/neovim/neovim/issues/19832.
Co-authored-by: Lewis Russell <lewis6991@gmail.com>
Problem:
Text edits with the same position (both line and character) were being
reverse sorted prior to being applied which differs from the lsp spec
Solution:
Change the sort order for just the same position edits
* Revert "fix(lsp): account for changedtick version gap on modified reset (#29170)"
This reverts commit 2e6d295f79.
* Revert "refactor(lsp): replace util.buf_versions with changedtick (#28943)"
This reverts commit 5c33815448.
Problem: Cannot have buffer-local value for 'completeopt'
(Nick Jensen).
Solution: Make 'completeopt' global-local (zeertzjq).
Also for some reason test Test_ColonEight_MultiByte seems to be failing
sporadically now. Let's mark it as flaky.
fixes: vim/vim#5487closes: vim/vim#14922529b9ad62a
We currently check $COLORTERM in the TUI process to determine if the
terminal supports 24 bit color (truecolor). If $COLORTERM is "truecolor"
or "24bit" then we automatically assume that the terminal supports
truecolor, but if $COLORTERM is set to any other value we still query
the terminal.
The `rgb` flag of the UI struct is a boolean which only indicates
whether the UI supports truecolor, but does not have a 3rd state that we
can use to represent "we don't know if the UI supports truecolor". We
currently use `rgb=false` to represent this "we don't know" state, and
we use XTGETTCAP and DECRQSS queries to determine at runtime if the
terminal supports truecolor. However, if $COLORTERM is set to a value
besides "truecolor" or "24bit" (e.g. "256" or "16) that is a clear
indication that the terminal _does not_ support truecolor, so it is
incorrect to treat `rgb=false` as "we don't know" in that case.
Instead, in the TUI process we only check for the terminfo capabilities.
This must be done in the TUI process because we do not have access to
this information in the core Neovim process when `_defaults.lua` runs.
If the TUI cannot determine truecolor support from terminfo alone, we
set `rgb=false` to indicate "we don't know if the terminal supports
truecolor yet, keep checking". When we get to `_defaults.lua`, we can
then check $COLORTERM and only query the terminal if it is unset.
This means that users can explicitly opt out of truecolor determination
by setting `COLORTERM=256` (or similar) in their environment.
Problem: no fuzzy-matching support for insert-completion
Solution: enable insert-mode completion with fuzzy-matching
using :set completopt+=fuzzy (glepnir).
closes: vim/vim#14878a218cc6cda
Co-authored-by: glepnir <glephunter@gmail.com>
LspDetach is now triggered by the main on_detach callback that is added
when an LSP client is attached to a buffer. The semantic_tokens module
already includes a LspDetach handler that does the right thing. When the
LspDetach trigger was added to the main LSP on_detach, it created a race
condition in semantic tokens when a buffer was deleted that would
trigger both its own on_detach and the LspDetach handlers. If the former
came last, an error was thrown trying to delete a non-existent augroup
(destroy() was being called twice).
Problem: no whitespace padding in commentstring option in ftplugins
Solution: Change default to include whitespace padding, update
existing filetype plugins with the new default value
(Riley Bruins)
closes: vim/vim#148430a0830624a
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
Problem: Completion side effects not working randomly.
Solution: When creating the table of LSP responses, the table index
was used, but this is not the same as the actual client_id, so it was changed
to use the client_id directly.
Problem: filetype: rasi files are not recognized
Solution: regonize '*.rasi' files as rasi filetype,
include a filetype and syntax plugin
(Pierrick Guillaume)
ported from: https://github.com/Fymyte/rasi.vimcloses: vim/vim#14821280e5b13ca
Co-authored-by: Pierrick Guillaume <pierguill@gmail.com>
`lsp.util.buf_versions` was already derived from changedtick (`on_lines`
from `buf_attach` synced the version)
As far as I can tell there is no need to keep track of the state in a
separate table.
The `complete()` mechanism matches completion candidates against
the typed text, so strict pre-filtering isn't necessary.
This is a first step towards supporting postfix snippets (like
`items@insert` in luals)
Problem: When an lsp client is stopped, the client will
only clear the diagnostics for the attached buffers but
not the unattached buffers.
Solution: Reset the diagnostics for the whole namespace rather than
for only the attached buffers.
Problem: There is no easy way to configure the behavior of the default
diagnostic "jump" mappings. For example, some users way want to show the
floating window, and some may not (likewise, some way want to only move
between warnings/errors, or disable the "wrap" parameter).
Solution: Add a "jump" table to vim.diagnostic.config() that sets
default values for vim.diagnostic.jump().
Alternatives: Users can override the default mappings to use the exact
options to vim.diagnostic.jump() that they want, but this has a couple
issues:
- While the default mappings are not complicated, they are also not
trivial, so overriding them requires users to understand
implementation details (specifically things like setting "count"
properly).
- If plugins want to change the default mappings, or configure the
behavior in any way (e.g. floating window display), it becomes even
harder for users to tweak specific behavior.
vim.diagnostic.config() already works quite well as the "entry point"
for tuning knobs with diagnostic UI elements, so this fits in nicely and
composes well with existing mental models and idioms.
Deprecate vim.diagnostic.goto_prev() and vim.diagnostic.goto_next() in
favor of a unified vim.diagnostic.jump() interface.
We cannot name the function "goto()" because some of our tooling
(luacheck and stylua) fail to parse it, presumably because "goto" is a
keyword in newer versions of Lua.
vim.diagnostic.jump() also allows moving to a specific diagnostic and
moving by multiple diagnostics at a time (useful for creating mappings
that use v:count).
For many small/simple functions (like those found in shared.lua), the
runtime of vim.validate can far exceed the runtime of the function
itself. Add an "overload" to vim.validate that uses a simple assertion
pattern, rather than parsing a full "validation spec".
Problem:
1. When interacting with multiple :InspectTree and the source buffer
windows there is a high chance of errors due to the window ids not
being updated and validated.
2. Not all InspectTree windows were closed when the source buffer was
closed.
Solution:
1. Update InspectTree window id on `CursorMoved` event and validate
source buffer window id before trying to navigate to it.
2. Close all InspectTree windows
Problem: there is missing default title highlight when highlight not defined in title text chunk.
Solution: when attr is not set use default title highlight group.
This is mostly an aesthetic change, although there are a few new pieces
of information included. Originally I wanted to investigate including
server capabilities in the healthcheck, but until we have the ability to
fold/unfold text in health checks that would be too much information.
Problem: Can't use a blockwise selection with a width for getregion().
Solution: Add support for blockwise selection with width like the return
value of getregtype() or the "regtype" value of TextYankPost
(zeertzjq).
closes: vim/vim#14842afc2295c22
The new default SwapExists autocommand displays warning text (W325) but
does not use the WarningMsg highlight group as other warnings do. Use
the WARN log level when displaying this warning.
Problem: `CompleteDone` currently does not specify the reason for why completion was done, which is problematic for completion plugins as they cannot know whether the event was triggered due to the completion being canceled, accepted, or for some other reason.
Solution: Add a `reason` key to `v:event`, which is set by `CompleteDone` to indicate why completion ended.
Deprecation with vim.deprecate is currently too noisy. Show the
following warning instead:
[function] is deprecated. Run ":checkhealth vim.deprecated" for more information.
The important part is that the full message needs to be short enough to
fit in one line in order to not trigger the "Press ENTER or type command
to continue" prompt.
The full information and stack trace for the deprecated functions will
be shown in the new healthcheck `vim.deprecated`.
In other words, `gx` works regardless of where it was used in
`[...](https://...)`. This only works on markdown buffers.
Co-authored-by: ribru17 <ribru17@gmail.com>
Problem: getregionpos() can't properly indicate positions beyond eol.
Solution: Add an "eol" flag that enables handling positions beyond end
of line like getpos() does (zeertzjq).
Also fix the problem that a position still has the coladd beyond the end
of the line when its column has been clamped. In the last test case
with TABs at the end of the line the old behavior is obviously wrong.
I decided to gate this behind a flag because returning positions that
don't correspond to actual characters in the line may lead to mistakes
for callers that want to calculate the length of the selected text, so
the behavior is only enabled if the caller wants it.
closes: vim/vim#148382b09de9104
Problem: Currently comment detection, addition, and removal are done
by matching 'commentstring' exactly. This has the downside when users
want to add comment markers with space (like with `-- %s`
commentstring) but also be able to uncomment lines that do not contain
space (like `--aaa`).
Solution: Use the following approach:
- Line is commented if it matches 'commentstring' with trimmed parts.
- Adding comment is 100% relying on 'commentstring' parts (as is now).
- Removing comment is first trying exact 'commentstring' parts with
fallback on trying its trimmed parts.
Problem: getregionpos() doesn't handle one char selection.
Solution: Handle startspaces differently when is_oneChar is set.
Also add a test for an exclusive charwise selection with
multibyte chars (zeertzjq)
closes: vim/vim#1482552a6f34887
