Problem: vim.lsp.tagfunc() causes an infinite loop.
This is a bug happened while introducing deferred loading.
Solution: Rename the private module to `vim.lsp._tagfunc`.
The benefit of this is that users only pay for what they use. If e.g.
only `vim.lsp.buf_get_clients()` is called then they don't need to load
all modules under `vim.lsp` which could lead to significant startuptime
saving.
Also `vim.lsp.module` is a bit nicer to user compared to
`require("vim.lsp.module")`.
This isn't used for some nested modules such as `filetype` as it breaks
tests with error messages such as "attempt to index field 'detect'".
It's not entirely certain the reason for this, but it is likely it is
due to filetype being precompiled which would imply deferred loading
isn't needed for performance reasons.
Problem:
Processing non-fast events during SystemObj:wait() may cause two pieces
of code to interfere with each other, and is different from jobwait().
Solution:
Don't process non-fast events during SystemObj:wait().
The "priority" field of extmarks can be used to set priorities of
extmarks which dictates which highlight group a range will actually have
when there are multiple extmarks applied. However, when multiple
extmarks have the same priority, the only way to enforce an actual
priority is through the order in which the extmarks are set.
It is not always possible or desirable to set extmarks in a specific
order, however, so we add a new "subpriority" field that explicitly
enforces the ordering of extmarks that have the same priority.
For now this will be used only to enforce priority of treesitter
highlights. A single node in a treesitter tree may match multiple
captures, in which case that node will have multiple extmarks set. The
order in which captures are returned from the treesitter API is not
_necessarily_ in the same order they are defined in a query file, so we
use the new subpriority field to force that ordering.
For now subpriorites are not documented and are not meant to be used by
external code, and it only applies to ephemeral extmarks. We indicate
the "private" nature of subpriorities by prefixing the field name with
an "_".
Problem: E95 is possible if a buffer called "[Command Line]" already
exists when opening the cmdwin. This can also happen if the
cmdwin's buffer could not be deleted when closing.
Solution: Un-name the cmdwin buffer, and give it a special name instead,
similar to what's done for quickfix buffers and for unnamed
prompt and scratch buffers. As a result, BufFilePre/Post are
no longer fired when opening the cmdwin. Add a "command" key
to the dictionary returned by getbufinfo() to differentiate
the cmdwin buffer instead. (Sean Dewar)
Cherry-pick test_normal changes from v9.0.0954.
1fb4103206
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: vim/vim#1269892e90a1e10
Co-authored-by: Casey Tucker <dctucker@hotmail.com>
Extmarks can contain URLs which can then be drawn in any supporting UI.
In the TUI, for example, URLs are "drawn" by emitting the OSC 8 control
sequence to the TTY. On terminals which support the OSC 8 sequence this
will create clickable hyperlinks.
URLs are treated as inline highlights in the decoration subsystem, so
are included in the `DecorSignHighlight` structure. However, unlike
other inline highlights they use allocated memory which must be freed,
so they set the `ext` flag in `DecorInline` so that their lifetimes are
managed along with other allocated memory like virtual text.
The decoration subsystem then adds the URLs as a new highlight
attribute. The highlight subsystem maintains a set of unique URLs to
avoid duplicating allocations for the same string. To attach a URL to an
existing highlight attribute we call `hl_add_url` which finds the URL in
the set (allocating and adding it if it does not exist) and sets the
`url` highlight attribute to the index of the URL in the set (using an
index helps keep the size of the `HlAttrs` struct small).
This has the potential to lead to an increase in highlight attributes
if a URL is used over a range that contains many different highlight
attributes, because now each existing attribute must be combined with
the URL. In practice, however, URLs typically span a range containing a
single highlight (e.g. link text in Markdown), so this is likely just a
pathological edge case.
When a new highlight attribute is defined with a URL it is copied to all
attached UIs with the `hl_attr_define` UI event. The TUI manages its own
set of URLs (just like the highlight subsystem) to minimize allocations.
The TUI keeps track of which URL is "active" for the cell it is
printing. If no URL is active and a cell containing a URL is printed,
the opening OSC 8 sequence is emitted and that URL becomes the actively
tracked URL. If the cursor is moved while in the middle of a URL span,
we emit the terminating OSC sequence to prevent the hyperlink from
spanning multiple lines.
This does not support nested hyperlinks, but that is a rare (and,
frankly, bizarre) use case. If a valid use case for nested hyperlinks
ever presents itself we can address that issue then.
Problem: vim.diagnostic.{underline,float,virtual_text...}.severity
will have a type warning on list-like or table (min-max) inputs,
e.g. `vim.diagnostic.config { float = { severity = { min = INFO } } }`.
Solution: Correct the typing as documented in |diagnostic-severity|.
'foldtext' can be set to an empty string to disable and render the
line with:
- extmark highlight
- syntax highlighting
- search highlighting
- no line wrapping
- spelling
- conceal
- inline virtual text
- respects `fillchars:fold`
Currently normal virtual text is not displayed
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
- Problem: One cannot easily write something like, for example:
`version_current >= {0, 10, 0}`; writing like
`not vim.version.lt(version_current, {0, 10, 0})` is verbose.
- Solution: add {`le`,`ge`} in addition to {`lt`,`gt`}.
- Also improve typing on the operator methods: allow `string` as well.
- Update the example in `vim.version.range()` docs: `ge` in place of
`gt` better matches the semantics of `range:has`.
Problem:
On devel(nightly) versions, deprecation warnings for hard-deprecated
features are not being displayed. E.g.,
- to be removed in: 0.11
- hard-deprecation since 0.10
- soft-deprecation since 0.9
then 0.10-nightly (0.10.0-dev) versions as well as 0.10.0 (stable)
should display the deprecation warning message.
Solution:
Improve the code and logic on `vim.deprecate()`, and improve
test cases with mocked `vim.version()`.
Problem: Parsed language annotations can be random garbage so
`nvim_get_runtime_file` throws an error.
Solution: Validate that `alias` is a valid language name before trying
to find a parser for it.
Problem: too vague errors for 'listchars'/'fillchars'
Solution: Include the field name in error message.
(zeertzjq)
related: #27050closes: vim/vim#138776a8d2e1634
Co-authored-by: Cole Frankenhoff <cole.nhf@gmail.com>
This function is used only in the `workspace/configuration` handler,
and does not warrant a public API because of its confusing return types.
The only caller `vim.lsp.handlers["workspace.configuration"]` is also
refactored to use `vim.tbl_get()` instead.
Problem: Modula2 filetype support lacking
Solution: Improve the Modula-2 runtime support, add additional modula2
dialects, add compiler plugin, update syntax highlighting,
include syntax tests, update Makefiles (Doug Kearns)
closes: vim/vim#6796closes: vim/vim#811568a8947069
- Luaify the detection script:
- Split the `(*!m2foo*)` and `(*!m2foo+bar*)` detection into two Lua patterns,
as Lua capture groups cannot be used with `?` and friends (as they only work
on character classes).
- Use `vim.api.nvim_buf_call()` (ew) to call `modula2#SetDialect()` to ensure
`b:modula2` is set for the given bufnr.
- Skip the syntax screendump tests. (A shame as they test some of the detection
from `(*!m2foo+bar*)` tags, but I tested this locally and it seems to work)
- Port the synmenu.vim changes from Vim9 script. (Also tested this locally)
- (And also add the missing comma for `b:browsefilter` from earlier.)
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Vim is missing a foreach() func
Solution: Implement foreach({expr1}, {expr2}) function,
which applies {expr2} for each item in {expr1}
without changing it (Ernie Rael)
closes: vim/vim#12166e79e207760
Partial port as this doesn't handle non-materialized range() lists.
vim-patch:c92b8bed1fa6
runtime(help): delete duplicate help tag E741 (vim/vim#13861)
c92b8bed1f
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Cannot easily get the list of matches
Solution: Add the matchstrlist() and matchbufline() Vim script
functions (Yegappan Lakshmanan)
closes: vim/vim#13766
Omit CHECK_LIST_MATERIALIZE(): it populates a List with numbers only,
and there is a check for strings below.
f93b1c881a
vim-patch:eb3475df0d92
runtime(doc): Replace non-breaking space with normal space (vim/vim#13868)
eb3475df0d
Co-authored-by: Yegappan Lakshmanan <4298407+yegappan@users.noreply.github.com>
The motivation for this update is Issue #15365, where background=light
is not properly set for Nvim running from an Nvim :terminal. This can be
encountered when e.g., opening a terminal to make git commits, which
opens EDITOR=nvim in the nested terminal.
Under the implementation of this commit, the OSC response always
indicates a black or white foreground/background. While this may not
reflect the actual foreground/background color, it permits 'background'
to be retained for a nested Nvim instance running in the terminal
emulator. The behaviour matches Vim.
