v8.1.0736 made some changes for making some emsgs more specific.
Includes the change for Test_lambda_fails() in test_lambda.vim.
Adjust relevant functionaltests to expect the new emsgs.
This patch has been fully ported in my Blob port PR, but it hasn't been
merged yet, so just use what we need from it for now.
Required for v8.1.1821.
Quoting the existing docs:
Packages are loaded. These are plugins, as above [&runtimepath], but
found in the "start" directory of each entry in 'packpath'. Every
plugin directory found is added in 'runtimepath' and then the plugins
are sourced.
Also tj didn't think I could do it.
The test of "replace environment" in the test module of
`test/functional/core/job_spec.lua` failed in case the bashrc file of
the user running the test has special actions in it (such actions were
printing to the screen from inside this file, or changing the bash mode
to be vi).
In order to fix this problem, the test now sets the shell to be
`/bin/sh` before running the command. Setting the shell to be `/bin/sh`
causes the running shell to run without the configuration of the user,
and so the test passes even in case of special .bashrc.
This change was done only for platforms other than Windows since it is
not relevant in windows.
The fix was applied to the specific test, even though it is possible
that related issues will arise in other tests. It seems like a big
overhead to make the fix work on all the possible tests, and it does not
worth this cost.
* fixed hang issue with --headless and -r option specified
Calling the do_more_prompt function in headless mode will freeze neovim because it is eventally in the input-accepting state (the same as waiting for --more--).
* fixed "Press ENTER or type command to continue" to be suppressed
If in headless mode, we need to exit at this point. If we continue, we will enter the normal mode and the message "Press ENTER or type command to continue" will be displayed and we will be in the input waiting state.
* fixed functional ex_cmds tests
* Revert "fixed "Press ENTER or type command to continue" to be suppressed"
This reverts commit a02dc40e3b.
* Revert "fixed functional ex_cmds tests"
This reverts commit 3bdb8da20a.
* fixed conditional again
* added test for fixed hang issue with --headless (#11386)
Problem: Using a full path is supported for 'directory' but not for
'backupdir'. (Mikolaj Machowski)
Solution: Support 'backupdir' as well. (Christian Brabandt, closesvim/vim#179)
b782ba475a
It is perfectly fine and expected to detach from the screen just by
the UI disconnecting from nvim or exiting nvim. Just keep detach() in
screen_basic_spec, to get some coverage of the detach method itself.
This avoids hang on failure in many situations (though one could argue
that detach() should be "fast", or at least "as fast as resize",
which works in press-return already).
Never use detach() just to change the size of the screen, try_resize()
method exists for that specifically.
Problem: When starting with multiple tabs file messages is confusing.
Solution: Set 'shortmess' when loading the other tabs. (Christian Brabandt)
c75e812623
Problem: If a job exits while waiting on another job, the on_exit
handler is queued but f_jobwait() skips it.
Solution: Always do process_wait(), so that handlers are run during
f_jobwait().
fix#8302
Test case:
$ BUSTED_ARGS="--repeat=2000 --no-keep-going" TEST_FILE=test/functional/core/job_spec.lua TEST_FILTER=waiting make functionaltest
Failure example (macOS CI):
FAILED test/functional/core/job_spec.lua: jobs jobwait will run callbacks while waiting
test/functional/core/job_spec.lua:606: Expected objects to be the same.
Passed in:
(table: 0x1be77c80) {
[1] = 'notification'
[2] = 'wait'
*[3] = {
*[1] = 3 } }
Expected:
(table: 0x1be77d10) {
[1] = 'notification'
[2] = 'wait'
*[3] = {
*[1] = 4 } }
stack traceback:
test/functional/core/job_spec.lua:606: in function <test/functional/core/job_spec.lua:583
Test sometimes fails on macOS CI:
FAILED test/functional/core/job_spec.lua: jobs jobwait will run callbacks while waiting
test/functional/core/job_spec.lua:606: Expected objects to be the same.
Passed in:
(table: 0x1be77c80) {
[1] = 'notification'
[2] = 'wait'
*[3] = {
*[1] = 3 } }
Expected:
(table: 0x1be77d10) {
[1] = 'notification'
[2] = 'wait'
*[3] = {
*[1] = 4 } }
stack traceback:
test/functional/core/job_spec.lua:606: in function <test/functional/core/job_spec.lua:583
Change the test to check if all jobs are starting, not only exiting.
Adapt some tests for OpenBSD:
- scrollback_spec:
- seq(1) is not available on OpenBSD: we'd use jot(1).
- Instead use a (hopefully) portable awk(1) snippet.
- channels_spec
- job_spec
- tui_spec
There was a longer timeout for Windows already, but unlike stated in
51d42917f it is not a worst-case, but gets waited for always.
The test is only about "-1" on timeout, so reduce it to this.
Fixes:
16:33:19,309 INFO - not ok 627 - jobs jobwait with timeout argument will return -1 if the wait timed out
16:33:19,309 INFO - # test/functional/core/job_spec.lua @ 707
16:33:19,309 INFO - # Failure message: test/functional/core/job_spec.lua:714: Expected objects to be the same.
16:33:19,309 INFO - # Passed in:
16:33:19,309 INFO - # (table: 0x0db1a3f0) {
16:33:19,309 INFO - # [1] = 'notification'
16:33:19,309 INFO - # [2] = 'wait'
16:33:19,309 INFO - # *[3] = {
16:33:19,309 INFO - # *[1] = {
16:33:19,309 INFO - # *[1] = -1
16:33:19,309 INFO - # [2] = -1 } } }
16:33:19,309 INFO - # Expected:
16:33:19,309 INFO - # (table: 0x0db1a480) {
16:33:19,309 INFO - # [1] = 'notification'
16:33:19,309 INFO - # [2] = 'wait'
16:33:19,309 INFO - # *[3] = {
16:33:19,309 INFO - # *[1] = {
16:33:19,309 INFO - # *[1] = 4
16:33:19,309 INFO - # [2] = -1 } } }
16:33:19,309 INFO - # stack traceback:
16:33:19,309 INFO - # test/functional/core/job_spec.lua:714: in function <test/functional/core/job_spec.lua:707>
The test.functional.helpers and test.unit.helpers modules now include
all of the public functions from test.helpers, so there is no need to
separately require('test.helpers').
* os/fs.c: add os_isdir_executable()
* eval.c: fix hang on job start caused by non-executable cwd option
* channel.c: assert cwd is an executable directory
* test: jobstart() produces error when using non-executable cwd
DWIM: avoid empty buffer 1 when stdin was empty. If other files were
specified at startup, we assume that stdin is only accidentally
not-a-TTY: user did not intend to send text from it.
ref #8560
ref #8561
If stdin is not a TTY we read it into buffer 1, as text. But if the
stdin pipe is empty, Nvim was most likely invoked for some other reason.
DWIM: select buffer 2 (if it exists). Example:
echo file1 | xargs nvim
closes#8560closes#8561
ref https://github.com/equalsraf/neovim-qt/issues/417
Before this change, -E/-Es without `-u NONE` reads stdin as Ex commands.
It should always read stdin as text (into buffer 1), like this:
echo foo | nvim -Es +'%p'
foo
echo foo | nvim -Es -u NORC +'%p'
foo
This changes Ex mode (Q, -e) to work like Vim's "improved Ex mode"
(gQ, -E). That brings some small behavior differences, but should not
impact most Ex scripts (unless, for example, they depend on mappings
being disabled--but that can be solved for -e by skipping user config).
Before this change:
* the screen test hangs.
After this change:
* Q acts like gQ.
* -e/-es differs from -E/-Es only in its treatment of stdin.
This moves towards potentially removing getexmodeline().
(HINT: That does NOT mean "removing Ex mode", it means removing the
Vi-compatible Ex mode, which differs from Vim's "improved Ex mode" only
in some minor details (e.g. mappings are disabled).)
ref #1089 :-)~
Fixes 2 failing tests in startup_spec.lua.
The Windows-only `--literal` option complicates support of "stdin-as-text
+ file-args" (#7679). Could work around it, but it's not worth
the trouble:
- users have a reasonable (and englightening) alternative: nvim +"n *"
- "always literal" is more consistent/predictable
- avoids platform-specific special-case
Unrelated changes:
- Replace fileno(stdxx) with STDXX_FILENO for consistency (not motivated
by any observed technical reason).
silent-mode (-es/-Es) has been broken for years. The workaround up to
now was to include --headless. But --headless is not equivalent because
it prints all messages, not the limited subset defined by silent-mode.
Treat stdin as text by default (so the "-" file is not needed):
echo foo | nvim
It works with file args (implemented in next commit), too:
echo foo | nvim file1.txt file2.txt
Why? Because:
- Execution of input is (1) almost always unintentional/confusing,
and (2) potentially destructive.
- Avoids the need for time-delayed warning. #7659
- The _common_ case is to open text in a buffer, not send commands.
Note:
- Not for Ex-mode (-es) because it is used by scripts. But maybe `-Es`?
- Not for --headless, because stdio may be a protocol stream and may be
used for any purpose by stdioopen().
To treat stdin as Normal-mode commands, use `-s -` instead:
echo ifoo | nvim -s -
Other alternatives:
- Replay a register. E.g. the following mostly works, except @q aborts
on any "beep" (e.g. if the cursor can't move).
nvim -c '%d q|norm @q' -
- Future: Let `:%source` work with unsaved buffer contents?
closes#2087closes#7659
likely fixes#7768#7913
If multiple internal stream callbacks were recieved before vimL
callbacks got called, only invoke one vimL callback with all data.
* Reading from stdin on Windows is fixed in the same way as it was in
#8267.
* The file_read function was returning without filling the
destination buffer when it was called with a non-blocking file
descriptor.
cmd.exe (shell) is faster and more reliable than powershell (.NET frontend).
It's best for short and basic tests that don't require non-trivial scripting.
cmd.exe doesn't support sleep so use powershell's Start-Sleep as substitute.
- echo "" does not hang in powershell
- cmd.exe's echo command does not hang.
- job tests default to powershell (WHY?)
- wait 5 seconds for powershell to create an empty file
- powershell is slow
- cannot reliably validate the id returned by jobstart via jobpid, jobstop
- if using cmd.exe, waiting for a second should be enough
- remaining job tests are unreliable in Windows because any build can pass/fail
for same conditions without changes, especially if the error is in stderr
Hope this will make people using feed_command less likely: this hides bugs.
Already found at least two:
1. msgpackparse() will show internal error: hash_add() in case of duplicate
keys, though it will still work correctly. Currently silenced.
2. ttimeoutlen was spelled incorrectly, resulting in option not being set when
expected. Test was still functioning somehow though. Currently fixed.
This variant uses `fdopen()` which is not standard, but it fixes problem on my
system. In next commit `scriptin` will use `FileDescriptor*` from os/fileio in
place of `FILE*`.
- Default to powershell.
- Avoid hardcoded "-c".
- Remove ^M character from received lines.
- pending_win32(): clear() is unnecessary and it pollutes the tests.
Closes#3973
Helped-by: Rui Abreu Ferreira <raf-ep@gmx.com>
While a job callback is active, it may be invoked again. Since the
data handled by the first invocation of the callback hasn't been marked
as consumed, the subsequent invocation will see the same data.
Reported-by: Daniel Hahler
Patch-by: oni-link
Closes#5889
These tests fail on master, so it's not a regression. Changes in #4874
(parent commit) seem to work (and pass most CI), so skipping these tests
is better than blocking the changes.
In Windows Lua's os.tmpname() returns relative paths starting with \s,
prepend them with $TEMP to generate a valid path.
In OS X os.tmpname() returns paths in '/tmp' but they should be in
'/private/tmp'. We cannot use os_name() for platform detection because
some tests use tempname() before nvim is spawned, instead use one of the
following:
1. Set SYSTEM_NAME environment variable before calling the tests, it
is set from CMAKE_SYSTEM_NAME(i.e. uname -s or 'Windows')
2. Call uname -s
3. Assume windows
Temporary change to avoid frequent hangs on Travis macOS/OSX builds.
Hang does not occur on Quickbuild OSX (Yosemite) build.
Reverting e9061117a5 avoids the hang, but causes
more serious regressions on many more systems.
Note that the job_spec hang only happens with the gcc-4.9 Travis OSX build.
References #5002
References #5029
