This commits introduces two performance improvements in incremental sync:
* avoiding expensive lua string reallocations on each on_lines call by requesting
only the changed chunk of the buffer as reported by firstline and new_lastline
parameters of on_lines
* re-using already allocated tables for storing the resulting lines to reduce the load on
the garbage collector
The majority of the performance improvement is from requesting only changed chunks
of the buffer.
Benchmark:
The following code measures the time required to perform a buffer edit to
that operates individually on each line, common to plugins such as vim-commentary.
set rtp+=~/.config/nvim/plugged/nvim-lspconfig
set rtp+=~/.config/nvim/plugged/vim-commentary
lua require('lspconfig')['ccls'].setup({})
function! Benchmark(tries) abort
let results_comment = []
let results_undo = []
for i in range(a:tries)
echo printf('run %d', i+1)
let begin = reltime()
normal gggcG
call add(results_comment, reltimefloat(reltime(begin)))
let begin = reltime()
silent! undo
call add(results_undo, reltimefloat(reltime(begin)))
redraw
endfor
let avg_comment = 0.0
let avg_undo = 0.0
for i in range(a:tries)
echomsg printf('run %3d: comment=%fs undo=%fs', i+1, results_comment[i], results_undo[i])
let avg_comment += results_comment[i]
let avg_undo += results_undo[i]
endfor
echomsg printf('average: comment=%fs undo=%fs', avg_comment / a:tries, avg_undo / a:tries)
endfunction
command! -bar Benchmark call Benchmark(10)
All text changes will be recorded within a single undo operation. Both the
comment operation itself and the undo operation will generate an on_lines event
for each changed line. Formatter plugins using setline() have also been found
to exhibit the same problem (neoformat, :RustFmt in rust.vim), as this function
too generates an on_lines event for every line it changes.
Using the neovim codebase as an example (commit 2ecf0a4)
with neovim itself built at 2ecf0a4 with
CMAKE_BUILD_TYPE=Release shows the following performance improvement:
src/nvim/lua/executor.c, 1432 lines:
- baseline, no optimizations: comment=0.540587s undo=0.440249s
- without double-buffering optimization: comment=0.183314s undo=0.060663s
- all optimizations in this commit: comment=0.174850s undo=0.052789s
src/nvim/search.c, 5467 lines:
- baseline, no optimizations: comment=7.420446s undo=7.656624s
- without double-buffering optimization: comment=0.889048s undo=0.486026s
- all optimizations in this commit: comment=0.662899s undo=0.243628s
src/nvim/eval.c, 11355 lines:
- baseline, no optimizations: comment=41.775695s undo=44.583374s
- without double-buffering optimization: comment=3.643933s undo=2.817158s
- all optimizations in this commit: comment=1.510886s undo=0.707928s
Co-authored-by: Dmytro Meleshko <dmytro.meleshko@gmail.com>
Closes https://github.com/neovim/neovim/issues/13647
This allows customizing the priority of the highlights.
* Add default priority of 50
* Use priority of 200 for highlight on yank
* use priority of 40 for highlight references (LSP)
This gives quickfix/location lists created by handlers which use
'response_to_list' (textDocument/documentSymbols and workspace/symbol by
default) the ability to set a more useful list title. This commit gives
lists created for documentSymbols a title of the form:
Symbols in <filename>
and lists for workspace/symbol a title of the form:
Symbols matching '<query>'
These are more informative than a standard "Language Server" list title
and can help disambiguate results when users have multiple quickfix
lists that they cycle through with `:colder` and `:cnewer`.
This removes the "fallback" to utf-16 in many of our helper functions. We
should always explicitly pass these around when possible except in two
locations:
* generating params with help utilities called by buf.lua functions
* the buf.lua functions themselves
Anything that is called by the handler should be passed the offset encoding.
omnisharp-roslyn can send negative values:
{
activeParameter = 0,
activeSignature = -1,
signatures = { {
documentation = "",
label = "TestEntity.TestEntity()",
parameters = {}
} }
}
In 3.16 of the specification `activeSignature` is defined as `uinteger`
and therefore negative values shouldn't be allowed, but within 3.15 it
was defined as `number` which makes me think we can be a bit lenient in
this case and handle them.
The expected behavior is quite clear:
The active signature. If omitted or the value lies outside the
range of `signatures` the value defaults to zero or is ignored if
the `SignatureHelp` has no signatures.
Fixes an error:
util.lua:1685: attempt to get length of local 'lines' (a nil value)
util.lua:1685: in function 'trim_empty_lines'
handlers.lua:334: in function 'textDocument/signatureHelp'
* vim-patch:8.2.4064: foam files are not detected
Problem: Foam files are not detected.
Solution: Detect the foam filetype by the path and file contents. (Mohammed
Elwardi Fadeli, closesvim/vim#9501)
2284f6cca3
* Port foam ft detection to filetype.lua
Co-authored-by: Gregory Anders <greg@gpanders.com>
Part of the `pending_change` closure in the `changetracking.prepare` was
a bit confusing because it has access to `bufnr` and `uri` but it could
actually contain pending changes batched for multiple buffers.
(We accounted for that by grouping `pending_changes` by a `uri`, but
it's not obvious what's going on)
This commit changes the approach to do everything per buffer to avoid
any ambiguity.
It also brings the debounce/no-debounce a bit closer together: The
only difference is now whether a timer is used or if it is triggered
immediately
Follow up to https://github.com/neovim/neovim/pull/16881
Document changes could get sent out of order to the server:
1. on_lines: debounce > 0; add to pending changes; setup timer
2. on_lines: debounce = 0; send new changes immediately
3. timer triggers, sending changes from 1.
Closes https://github.com/neovim/neovim/issues/16985
* get_lines checks if buf_loaded using bufnr 0, which is
typically used as a sentinel value, but here must be resolved
to the true bufnr
Negative priority patterns are those that act as catch-alls when all
other attempts at matching have failed (typically the patterns that use
the StarSetf functions).
The idea of the debounce is to avoid overloading a server with didChange
notifications. So far this used a constant value to group changes within
an interval together and send a single notification. A side effect of
this is that when you were idle, notifications are still delayed.
This commit changes the logic to take the time the last notification
happened into consideration, if it has been greater than the debounce
interval, the debouncing is skipped or at least reduced.
Because filetype.lua is gated behind an opt-in variable, it's not tested
during the "standard" test_filetype.vim test. So port the test into
filetype_spec where we enable the opt-in variable.
This means runtime Vim patches will need to update test_filetype in two
places. This can eventually be removed if/when filetype.lua is made
opt-out rather than opt-in.
Filetype detection runs on BufRead and BufNewFile autocommands, both of
which can fire without an underlying buffer, so it's incorrect to use
<abuf> to determine the file path. Instead, match on <afile> and assume
that the buffer we're operating on is the current buffer. This is the
same assumption that filetype.vim makes, so it should be safe.
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Sebastian Volland <seb@baunz.net>
Co-authored-by: Lewis Russell <lewis6991@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
