Problem: crash with bt_quickfix1_poc when cleaning up
and EXITFREE is defined
Solution: Test if buffer is valid in a window, else close
window directly, don't try to access buffer properties
While at it, increase the crash timeout slightly, so that CI has a
chance to finish processing the test_crash() test.
623ba31821
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-use-after-free in bt_normal()
Solution: check that buffer is still valid
6e60cf444a
Test change only.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap use after free in ins_compl_get_exp()
Solution: validate buffer before accessing it
ee9166eb3b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-use-after-free in is_qf_win()
Solution: Check buffer is valid before accessing it
fc68299d43
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: test_crash1() fails on CI
Solution: don't run Screendump test, verify that it doesn't crash
by running it through a shell command line, testing
the exit value and concatenating success cmd using '&&'
db510ca805
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: FPE in adjust_plines_for_skipcol
Solution: don't divide by zero, return zero
Prevent a floating point exception when calculating w_skipcol (which can
happen with a small window when the number option is set and cpo+=n).
Add a test to verify
cb0b99f067
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in get_number
Solution: Return 0 when the count gets too large
[security]: overflow in get_number
When using the z= command, we may overflow the count with values larger
than MAX_INT. So verify that we do not overflow and in case when an
overflow is detected, simply return 0
73b2d3790c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in ex address parsing
Solution: Verify that lnum is positive, before substracting from
LONG_MAX
[security]: overflow in ex address parsing
When parsing relative ex addresses one may unintentionally cause an
overflow (because LONG_MAX - lnum will overflow for negative addresses).
So verify that lnum is actually positive before doing the overflow
check.
060623e4a3
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in nv_z_get_count
Solution: break out, if count is too large
When getting the count for a normal z command, it may overflow for large
counts given. So verify, that we can safely store the result in a long.
58f9befca1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow with count for :s command
Solution: Abort the :s command if the count is too large
If the count after the :s command is larger than what fits into a
(signed) long variable, abort with e_value_too_large.
Adds a test with INT_MAX as count and verify it correctly fails.
It seems the return value on Windows using mingw compiler wraps around,
so the initial test using :s/./b/9999999999999999999999999990 doesn't
fail there, since the count is wrapping around several times and finally
is no longer larger than 2147483647. So let's just use 2147483647 in the
test, which hopefully will always cause a failure
ac63787734
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Test for expanding "~" in substitute takes too long.
Solution: Disable the test for now.
916d6dd5b1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when expanding "~" in substitute causes very long text.
Solution: Limit the text length to MAXCOL.
ab9a2d884b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: vim/vim#13533bc8f79d36a
Co-authored-by: rhysd <lin90162@yahoo.co.jp>
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
libtermkey does not interpret OSC sequences that end with a BEL (0x07)
instead of an ST (0x1b 0x5c) terminator. This causes these tests to fail
since the OSC response is now parsed via libtermkey. Change the tests to
use the ST terminator to appease libtermkey.
Problem: Text properties test fails when 'encoding' is not utf-8.
Solution: Compare with original value of 'encoding'. (Christian Brabandt,
closesvim/vim#3986)
ed79d1e348
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Running tests may leave some files behind.
Solution: Delete the right files. Fix a few typos. (Dominique Pellé,
closesvim/vim#7436ac665c24c9
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot set a directory for a tab page.
Solution: Add the tab-local directory. (Yegappan Lakshmanan, closesvim/vim#4212)
00aa069db8
Session-related changes only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim doesn't use the new ConPTY support in Windows 10.
Solution: Use ConPTY support, if available. (Nobuhiro Takasaki, closesvim/vim#3794)
aa5df7e312
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Terminal windows in a session are not properly restored.
Solution: Add "terminal" in 'sessionoptions'. When possible restore the
command running in a terminal.
4d8bac8bf5
Tests only. Nvim has no equivalent to "norestore" yet.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: vim/vim#13493closes: vim/vim#135249588666360
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Tests are flaky because of using a common file name.
Solution: Rename files and directories to be more unique.
61abe7d8f8
Cherry-pick Test_custom_complete_autoload() from patch 8.2.4584.
Cherry-pick test_delete.vim & test_edit.vim changes from patch 9.0.0323.
Cherry-pick test_edit.vim changes from patch 8.2.3637.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Debugger test may fail when $CWD is very long.
Solution: Skip the test if the directory name is too long. (James McCoy,
closesvim/vim#10837)
db7a88db8b
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: Various things no6 properly tested.
Solution: Add various test cases. (Yegappan Lakshmanan, closesvim/vim#10259)
885de449c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash in debugger when a variable is not available in the current
block.
Solution: Check for a NULL name. (closesvim/vim#9926)
e406ff87c8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: expression breakpoint not checked in :def function.
Solution: Always compile a function for debugging if there is an expression
breakpoint. (closesvim/vim#8803)
26a4484da2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: crash when debugging a function with line continuation.
Solution: Check for a NULL pointer. (closesvim/vim#8521)
303215d60c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Temp files remain after running tests.
Solution: Delete the right files. (Dominique Pellé, closesvim/vim#8509)
6c72fd51a8
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Vim9: breakpoint on "for" does not work.
Solution: Use the right line number in ISN_DEBUG. (closesvim/vim#8486)
6fc0161682
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugging lambda does not work.
Solution: Use the compile type of the function when compiling a lambda.
(closesvim/vim#8412)
17d868b8b2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint at a comment line does not work.
Solution: Add the comment line number to the debug instruction.
(closesvim/vim#8429)
8cec9273d2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint in compiled function not always checked.
Solution: Check for breakpoint when calling compiled function from compiled
function.
2ac4b2536a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot set breakpoint in compiled function.
Solution: Check for breakpoint when calling a function.
4f8f54280f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugger shows too many lines.
Solution: Truncate at a comment, "enddef", etc. (closesvim/vim#8392)
59b50c3bee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim: when debugging only the first line of a command using line
continuation is displayed.
Solution: Find the next command and concatenate lines until that one.
(closesvim/vim#8392)
4cea536bdf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot get argument values during debugging.
Solution: Lookup names in the list of arguments. Put debug instruction
halfway for command.
6bc30b05e6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: when debugging cannot inspect local variables.
Solution: Make local variables available when debugging.
b69c6fb7b4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
runtime(termdebug): improve the breakpoint sign label (vim/vim#13525)
// related vim/vim#12589
// that should be the last chat (I) with Bram, r.i.p
2dd613f57b
Co-authored-by: Shane-XB-Qian <shane.qian@foxmail.com>
We already have an extensive suite of static analysis tools we use,
which causes a fair bit of redundancy as we get duplicate warnings. PVS
is also prone to give false warnings which creates a lot of work to
identify and disable.
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
Problem: CI: test_termdebug may still fail
Solution: use term_wait() to make it more robust
closes: vim/vim#13529fdbadea4b6
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
Problem: CI: test_termdebug fails
Solution: only test for a changed winlayout, if the window
width actually changed
Also, include an unrelated comment (which doesn't warrant its own patch
number)
305127f9f2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Terminal test for current directory not used on FreeBSD.
Solution: Make it work on FreeBSD. (Ozaki Kiichi, closesvim/vim#9516) Add
TermWait() inside Run_shell_in_terminal() as a generic solution.
ced2b38a56
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: still some issues with term_debug test
Solution: Use WaitForAssert()
closes: vim/vim#1293685c3a5bc26
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: No tests for the termdebug plugin
Solution: Add some simple tests for the termdebug plugin
closes: vim/vim#1292758f39d89a8
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No way to have extmarks automatically removed when the range it
is attached to is deleted.
Solution: Add new 'invalidate' property that will hide a mark when the
entirety of its range is deleted. When "undo_restore" is set
to false, delete the mark from the buffer instead.
Problem: tests: failure in test_arabic
Solution: adjust the test for the changed arabic keymap
2a94e98792
Co-authored-by: Christian Brabandt <cb@256bit.org>
It is a design goal of extmarks that they allow precise tracking
of changes across undo/redo, including restore the exact positions
after a do/undo or undo/redo cycle. However this behavior is not useful
for all usecases. Many plugins won't keep marks around for long after
text changes, but uses them more like a cache until some external source
(like LSP semantic highlights) has fully updated to changed text and
then will explicitly readjust/replace extmarks as needed.
Add a "undo_restore" flag which is true by default (matches existing
behavior) but can be set to false to opt-out of this behavior.
Delete dead u_extmark_set() code.
Problem: complete_info() skips entries with 'noselect'
Solution: Check, if first entry is at original text state
Unfortunately, Commit daef8c74375141974d61b85199b383017644978c
introduced a regression, that when ':set completeopt+=noselect' is set
and no completion item has been selected yet, it did not fill the
complete_info['items'] list.
This happened, because the current match item did not have the
CP_ORIGINAL_TEXT flag set and then the cp->prev pointer did point to the
original flag item, which caused the following while loop to not being
run but being skipped instead.
So when the 'noselect' is set, only start with to the previous selection
item, if the initial completion item has the CP_ORIGINAL_TEXT flag set,
else use the 2nd previous item instead.
fixes: vim/vim#13451closes: vim/vim#1345257f9ce1a09
Co-authored-by: Christian Brabandt <cb@256bit.org>
refactor: use a more idiomatic loop to iterate over the cells
There are two cases in which the following assertion would fail:
```c
assert(g->icell < g->ncells);
```
1. If `g->ncells = 0`. Update this to be legal.
2. If an EOF is reached while parsing `wrap`. In this case, the unpacker
attempts to resume from `cells`, which is a bug. Create a new state
for parsing `wrap`.
Reference: https://neovim.io/doc/user/ui.html#ui-event-grid_line
Previously, 'rightleftcmd' was implemented by having all code which
would affect msg_col or output screen cells be conditional on `cmdmsg_rl`.
This change removes all that and instead implements rightleft as a
mirroring post-processing step.
connection from any channel or stdio will unblock
remote_ui_wait_for_attach. Wait on stdio only if
only —embed specified, if both —embed and
—listen then wait on any channel.
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
Problem: With 'smoothscroll' set, "w_skipcol" is not reset when unsetting 'wrap'.
Resulting in incorrect calculation of the cursor position.
Solution: Reset "w_skipcol" when unsetting 'wrap'.
fixes: vim/vim#12970closes: vim/vim#134391bf1bf569b
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: vim/vim#13367closes: vim/vim#133754bca4897a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: vim/vim#13402
related: vim/vim#12971closes: vim/vim#13408daef8c7437
Co-authored-by: Christian Brabandt <cb@256bit.org>
The prefix option of the diagnostic virtual text can be a function,
but previously it was only a function of diagnostic.
This function should also have additional parameters index and total,
more consistently and similarily as in the prefix function for
`vim.diagnostic.open_float()`.
These additional parameters will be useful when there are too many
number of diagnostics in a single line.
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm9198c1f2b1
N/A patch:
vim-patch:9.0.2073: typo in quickfix.c comments
Co-authored-by: Christian Brabandt <cb@256bit.org>
Fixes a regression from 5e5f5174e3
Until that commit we had a logic like this:
`local prefix = startbyte and line:sub(startbyte + 1) or line_to_cursor:sub(word_boundary)`
The commit changed the logic and no longer cut off the line at the cursor, resulting in a prefix that included trailing characters
Problem:
`win_get_bordertext_col` returns column < 1 for right or center
aligned text, if its length is more than window width.
Solution:
Return max(resulting_column, 1)
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: vim/vim#13419b731800522
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: vim/vim#133997d254dbc2d
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: vim/vim#1340584394f2be4
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
Fixes https://github.com/neovim/neovim/issues/25177
I initially wanted to split this into a refactor commit to make it more
testable, but it appears that already accidentally fixed the issue by
normalizing lnum/col to 0-indexing
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: vim/vim#13396a36acb7ac4
`SREQ_*` values are now actual typedef'd enums. `get_option_value_strict()` has also been refactored and split into two functions, `get_option_attrs()` for getting the option attributes, and `get_option_value_strict()` for getting the actual value. Moreover, it now returns an `OptVal`. Other miscellaneous refactors have also been made.
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: vim/vim#1338047416d1a74
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: vim/vim#13389a8c664a042
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: vim/vim#13376closes: vim/vim#13377c59c1e0d88
The change in check_due_timer() is N/A as Nvim calls timer callbacks on
the main loop.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: vim/vim#13371a0e1f06f04
Problem: Wrong color for half of wide character next to pum scrollbar.
Solution: Redraw the screen cell with the right color. (closesvim/vim#9874)
35d8c2010e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: completion shows current word after completion restart
Solution: remove the word being completed after completion restart
The word being completed is shown in a completion list after completion
restart, because it isn't removed from the current buffer before
searching for matches.
Also adjust `Test_complete_add_onechar` to match the new behavior.
closes: vim/vim#133492e3cd52fa0
Co-authored-by: nwounkn <nwounkn@gmail.com>
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: vim/vim#13320bd734c3bea
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem:
The next command after `silent !{cmd}` or `silent lua print('str')`
prints an empty line before printing a message, because these commands
set `msg_didout = true` despite not printing any messages.
Solution:
Set `msg_didout = true` only if `msg_silent == 0`
Problem: Peeking and flushing output slows down execution.
Solution: Do not update the mode message when global_busy is set. Do not
flush when only peeking for a character. (Ken Takata)
cb574f4154
PROBLEM:
Currently `:echoerr` prints multi-line strings in a single line
as `:echom` does (Note: `:echon` can print multi-line strings well).
This makes stacktrace printed via echoerr difficult to read.
Example code:
try
lua error("lua stacktrace")
catch
echoerr v:exception
endtry
Output:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace^@stack traceback:^@^I[C]: in function 'error'^@^I[string ":lua"]:1: in main chunk
SOLUTION:
Allow echoerr to print multiline messages (e.g., lua exceptions),
because this command is usually used to print stacktraces.
Output after the fix:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace
stack traceback:
[C]: in function 'error'
[string ":lua"]:1: in main chunk
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: vim/vim#12230closes: vim/vim#1297169fb5afb3b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Vim9: in script cannot set item in uninitialized list.
Solution: When a list is NULL allocate an empty one. (closesvim/vim#8461)
e65081d1b5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: vim/vim#13228closes: vim/vim#13243dd75fcfbdf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: vim/vim#133164a82bdfaa8
Co-authored-by: Martin Tournoij <martin@arp242.net>
Using fnameescape() for the path argument of findfile() and finddir() is
wrong, as fnameescape() is intended to be used for parts of Ex commands,
not function arguments.
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: test: undofile left behind
Solution: cleanup undofile
fix: tmp file not deleted when running make test_undo
Temporary file `.Xtestfile.txt.un~` was left running `make test_undo`
and vim was configured with:
```
./configure --with-features=normal --enable-gui=no --enable-terminal
```
closes: vim/vim#13304b07b9dc4da
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
"VimEnter foo" was accepted as a valid event name for "VimEnter".
Events delimited with commas, eg. "VimEnter,BufRead", were also
accepted, even though only the first event was actually parsed.
Co-authored-by: ii14 <ii14@users.noreply.github.com>
The 'arabicshape' feature of vim is a transformation of unicode text to
make arabic and some related scripts look better at display time. In
particular the content of a cell will be adjusted depending on the
(original) content of the cells just before and after it.
This is implemented by the arabic_shape() function in nvim. Before this
commit, shaping was invoked in four different contexts:
- when rendering buffer text in win_line()
- in line_putchar() for rendering virtual text
- as part of grid_line_puts, used by messages and statuslines and
similar
- as part of draw_cmdline() for drawing the cmdline
This replaces all these with a post-processing step in grid_put_linebuf(),
which has become the entry point for all text rendering after recent
refactors.
An aim of this is to make the handling of multibyte text yet simpler.
One of the main reasons multibyte chars needs to be "parsed" into
codepoint arrays of composing chars is so that these could be inspected
for the purpose of shaping. This can likely be vastly simplified in many
contexts where only the total length (in bytes) and width of composed
char is needed.
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
This finalizes the long running refactor from the old TUI-focused grid
implementation where text-drawing cursor was not separated from the
visible cursor.
Still, the pattern of setting cursor position together with updating a
line was convenient. Introduce grid_line_cursor_goto() to still allow
this but now being explicit about it.
Only having batched drawing functions makes code involving drawing
a bit longer. But it is better to be explicit, and this highlights
cases where multiple small redraws can be grouped together. This was the
case for most of the changed places (messages, lastline, and :intro)
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: vim/vim#13219closes: vim/vim#132108e5f26ec6a
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: vim/vim#132560583491277
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
